| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull UML fix from Richard Weinberger:
"Fix time travel mode"
* tag 'for-linus-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: fix time travel mode
|
|
Pull x86 fixes from Thomas Gleixner:
"A few fixes for x86:
- Fix a boot regression caused by the recent bootparam sanitizing
change, which escaped the attention of all people who reviewed that
code.
- Address a boot problem on machines with broken E820 tables caused
by an underflow which ended up placing the trampoline start at
physical address 0.
- Handle machines which do not advertise a legacy timer of any form,
but need calibration of the local APIC timer gracefully by making
the calibration routine independent from the tick interrupt. Marked
for stable as well as there seems to be quite some new laptops
rolled out which expose this.
- Clear the RDRAND CPUID bit on AMD family 15h and 16h CPUs which are
affected by broken firmware which does not initialize RDRAND
correctly after resume. Add a command line parameter to override
this for machine which either do not use suspend/resume or have a
fixed BIOS. Unfortunately there is no way to detect this on boot,
so the only safe decision is to turn it off by default.
- Prevent RFLAGS from being clobbers in CALL_NOSPEC on 32bit which
caused fast KVM instruction emulation to break.
- Explain the Intel CPU model naming convention so that the repeating
discussions come to an end"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Don't clobber RFLAGS during CALL_NOSPEC on i386
x86/boot: Fix boot regression caused by bootparam sanitizing
x86/CPU/AMD: Clear RDRAND CPUID bit on AMD family 15h/16h
x86/boot/compressed/64: Fix boot on machines with broken E820 table
x86/apic: Handle missing global clockevent gracefully
x86/cpu: Explain Intel model naming convention
|
|
Pull perf fixes from Thomas Gleixner:
"Two small fixes for kprobes and perf:
- Prevent a deadlock in kprobe_optimizer() causes by reverse lock
ordering
- Fix a comment typo"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kprobes: Fix potential deadlock in kprobe_optimizer()
perf/x86: Fix typo in comment
|
|
Mergr misc fixes from Andrew Morton:
"11 fixes"
Mostly VM fixes, one psi polling fix, and one parisc build fix.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/kasan: fix false positive invalid-free reports with CONFIG_KASAN_SW_TAGS=y
mm/zsmalloc.c: fix race condition in zs_destroy_pool
mm/zsmalloc.c: migration can leave pages in ZS_EMPTY indefinitely
mm, page_owner: handle THP splits correctly
userfaultfd_release: always remove uffd flags and clear vm_userfaultfd_ctx
psi: get poll_work to run when calling poll syscall next time
mm: memcontrol: flush percpu vmevents before releasing memcg
mm: memcontrol: flush percpu vmstats before releasing memcg
parisc: fix compilation errrors
mm, page_alloc: move_freepages should not examine struct page of reserved memory
mm/z3fold.c: fix race between migration and destruction
|
|
Pull dma-mapping fixes from Christoph Hellwig:
"Two fixes for regressions in this merge window:
- select the Kconfig symbols for the noncoherent dma arch helpers on
arm if swiotlb is selected, not just for LPAE to not break then Xen
build, that uses swiotlb indirectly through swiotlb-xen
- fix the page allocator fallback in dma_alloc_contiguous if the CMA
allocation fails"
* tag 'dma-mapping-5.3-5' of git://git.infradead.org/users/hch/dma-mapping:
dma-direct: fix zone selection after an unaddressable CMA allocation
arm: select the dma-noncoherent symbols for all swiotlb builds
|
|
Commit 0cfaee2af3a0 ("include/asm-generic/5level-fixup.h: fix variable
'p4d' set but not used") converted a few functions from macros to static
inline, which causes parisc to complain,
In file included from include/asm-generic/4level-fixup.h:38:0,
from arch/parisc/include/asm/pgtable.h:5,
from arch/parisc/include/asm/io.h:6,
from include/linux/io.h:13,
from sound/core/memory.c:9:
include/asm-generic/5level-fixup.h:14:18: error: unknown type name 'pgd_t'; did you mean 'pid_t'?
#define p4d_t pgd_t
^
include/asm-generic/5level-fixup.h:24:28: note: in expansion of macro 'p4d_t'
static inline int p4d_none(p4d_t p4d)
^~~~~
It is because "4level-fixup.h" is included before "asm/page.h" where
"pgd_t" is defined.
Link: http://lkml.kernel.org/r/20190815205305.1382-1-cai@lca.pw
Fixes: 0cfaee2af3a0 ("include/asm-generic/5level-fixup.h: fix variable 'p4d' set but not used")
Signed-off-by: Qian Cai <cai@lca.pw>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use 'lea' instead of 'add' when adjusting %rsp in CALL_NOSPEC so as to
avoid clobbering flags.
KVM's emulator makes indirect calls into a jump table of sorts, where
the destination of the CALL_NOSPEC is a small blob of code that performs
fast emulation by executing the target instruction with fixed operands.
adcb_al_dl:
0x000339f8 <+0>: adc %dl,%al
0x000339fa <+2>: ret
A major motiviation for doing fast emulation is to leverage the CPU to
handle consumption and manipulation of arithmetic flags, i.e. RFLAGS is
both an input and output to the target of CALL_NOSPEC. Clobbering flags
results in all sorts of incorrect emulation, e.g. Jcc instructions often
take the wrong path. Sans the nops...
asm("push %[flags]; popf; " CALL_NOSPEC " ; pushf; pop %[flags]\n"
0x0003595a <+58>: mov 0xc0(%ebx),%eax
0x00035960 <+64>: mov 0x60(%ebx),%edx
0x00035963 <+67>: mov 0x90(%ebx),%ecx
0x00035969 <+73>: push %edi
0x0003596a <+74>: popf
0x0003596b <+75>: call *%esi
0x000359a0 <+128>: pushf
0x000359a1 <+129>: pop %edi
0x000359a2 <+130>: mov %eax,0xc0(%ebx)
0x000359b1 <+145>: mov %edx,0x60(%ebx)
ctxt->eflags = (ctxt->eflags & ~EFLAGS_MASK) | (flags & EFLAGS_MASK);
0x000359a8 <+136>: mov -0x10(%ebp),%eax
0x000359ab <+139>: and $0x8d5,%edi
0x000359b4 <+148>: and $0xfffff72a,%eax
0x000359b9 <+153>: or %eax,%edi
0x000359bd <+157>: mov %edi,0x4(%ebx)
For the most part this has gone unnoticed as emulation of guest code
that can trigger fast emulation is effectively limited to MMIO when
running on modern hardware, and MMIO is rarely, if ever, accessed by
instructions that affect or consume flags.
Breakage is almost instantaneous when running with unrestricted guest
disabled, in which case KVM must emulate all instructions when the guest
has invalid state, e.g. when the guest is in Big Real Mode during early
BIOS.
Fixes: 776b043848fd2 ("x86/retpoline: Add initial retpoline support")
Fixes: 1a29b5b7f347a ("KVM: x86: Make indirect calls in emulator speculation safe")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190822211122.27579-1-sean.j.christopherson@intel.com
|
|
Unfortunately, my build fix for when time travel mode isn't
enabled broke time travel mode, because I forgot that we need
to use the timer time after the timer has been marked disabled,
and thus need to leave the time stored instead of zeroing it.
Fix that by splitting the inline into two, so we can call only
the _mode() one in the relevant code path.
Fixes: b482e48d29f1 ("um: fix build without CONFIG_UML_TIME_TRAVEL_SUPPORT")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Pull more fallthrough fixes from Gustavo A. R. Silva:
"Fix fall-through warnings on arm and mips for multiple configurations"
* tag 'Wimplicit-fallthrough-5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
video: fbdev: acornfb: Mark expected switch fall-through
scsi: libsas: sas_discover: Mark expected switch fall-through
MIPS: Octeon: Mark expected switch fall-through
power: supply: ab8500_charger: Mark expected switch fall-through
watchdog: wdt285: Mark expected switch fall-through
mtd: sa1100: Mark expected switch fall-through
drm/sun4i: tcon: Mark expected switch fall-through
drm/sun4i: sun6i_mipi_dsi: Mark expected switch fall-through
ARM: riscpc: Mark expected switch fall-through
dmaengine: fsldma: Mark expected switch fall-through
|
|
commit a90118c445cc ("x86/boot: Save fields explicitly, zero out everything
else") had two errors:
* It preserved boot_params.acpi_rsdp_addr, and
* It failed to preserve boot_params.hdr
Therefore, zero out acpi_rsdp_addr, and preserve hdr.
Fixes: a90118c445cc ("x86/boot: Save fields explicitly, zero out everything else")
Reported-by: Neil MacLeod <neil@nmacleod.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Neil MacLeod <neil@nmacleod.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190821192513.20126-1-jhubbard@nvidia.com
|
|
Pull KVM fixes from Paolo Bonzini:
"A couple bugfixes, and mostly selftests changes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests/kvm: make platform_info_test pass on AMD
Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"
selftests: kvm: fix state save/load on processors without XSAVE
selftests: kvm: fix vmx_set_nested_state_test
selftests: kvm: provide common function to enable eVMCS
selftests: kvm: do not try running the VM in vmx_set_nested_state_test
KVM: x86: svm: remove redundant assignment of var new_entry
MAINTAINERS: add KVM x86 reviewers
MAINTAINERS: change list for KVM/s390
kvm: x86: skip populating logical dest map if apic is not sw enabled
|
|
This reverts commit 4e103134b862314dc2f2f18f2fb0ab972adc3f5f.
Alex Williamson reported regressions with device assignment with
this patch. Even though the bug is probably elsewhere and still
latent, this is needed to fix the regression.
Fixes: 4e103134b862 ("KVM: x86/mmu: Zap only the relevant pages when removing a memslot", 2019-02-05)
Reported-by: Alex Willamson <alex.williamson@redhat.com>
Cc: stable@vger.kernel.org
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: cavium_octeon_defconfig mips):
arch/mips/include/asm/octeon/cvmx-sli-defs.h:47:6: warning: this statement
may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
Mark switch cases where we are expecting to fall through.
Fix the following warning (Building: rpc_defconfig arm):
arch/arm/mach-rpc/riscpc.c: In function ‘parse_tag_acorn’:
arch/arm/mach-rpc/riscpc.c:48:13: warning: this statement may fall through [-Wimplicit-fallthrough=]
vram_size += PAGE_SIZE * 256;
~~~~~~~~~~^~~~~~~~~~~~~~~~~~
arch/arm/mach-rpc/riscpc.c:49:2: note: here
case 256:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
We need to provide the arch hooks for non-coherent dma-direct
and swiotlb for all swiotlb builds, not just when LPAS is enabled.
Without that the Xen build that selects SWIOTLB indirectly through
SWIOTLB_XEN fails to build.
Fixes: ad3c7b18c5b3 ("arm: use swiotlb for bounce buffering on LPAE configs")
Reported-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
|
|
There have been reports of RDRAND issues after resuming from suspend on
some AMD family 15h and family 16h systems. This issue stems from a BIOS
not performing the proper steps during resume to ensure RDRAND continues
to function properly.
RDRAND support is indicated by CPUID Fn00000001_ECX[30]. This bit can be
reset by clearing MSR C001_1004[62]. Any software that checks for RDRAND
support using CPUID, including the kernel, will believe that RDRAND is
not supported.
Update the CPU initialization to clear the RDRAND CPUID bit for any family
15h and 16h processor that supports RDRAND. If it is known that the family
15h or family 16h system does not have an RDRAND resume issue or that the
system will not be placed in suspend, the "rdrand=force" kernel parameter
can be used to stop the clearing of the RDRAND CPUID bit.
Additionally, update the suspend and resume path to save and restore the
MSR C001_1004 value to ensure that the RDRAND CPUID setting remains in
place after resuming from suspend.
Note, that clearing the RDRAND CPUID bit does not prevent a processor
that normally supports the RDRAND instruction from executing it. So any
code that determined the support based on family and model won't #UD.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chen Yu <yu.c.chen@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: "linux-doc@vger.kernel.org" <linux-doc@vger.kernel.org>
Cc: "linux-pm@vger.kernel.org" <linux-pm@vger.kernel.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: <stable@vger.kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "x86@kernel.org" <x86@kernel.org>
Link: https://lkml.kernel.org/r/7543af91666f491547bd86cebb1e17c66824ab9f.1566229943.git.thomas.lendacky@amd.com
|
|
Pull networking fixes from David Miller:
1) Fix jmp to 1st instruction in x64 JIT, from Alexei Starovoitov.
2) Severl kTLS fixes in mlx5 driver, from Tariq Toukan.
3) Fix severe performance regression due to lack of SKB coalescing of
fragments during local delivery, from Guillaume Nault.
4) Error path memory leak in sch_taprio, from Ivan Khoronzhuk.
5) Fix batched events in skbedit packet action, from Roman Mashak.
6) Propagate VLAN TX offload to hw_enc_features in bond and team
drivers, from Yue Haibing.
7) RXRPC local endpoint refcounting fix and read after free in
rxrpc_queue_local(), from David Howells.
8) Fix endian bug in ibmveth multicast list handling, from Thomas
Falcon.
9) Oops, make nlmsg_parse() wrap around the correct function,
__nlmsg_parse not __nla_parse(). Fix from David Ahern.
10) Memleak in sctp_scend_reset_streams(), fro Zheng Bin.
11) Fix memory leak in cxgb4, from Wenwen Wang.
12) Yet another race in AF_PACKET, from Eric Dumazet.
13) Fix false detection of retransmit failures in tipc, from Tuong
Lien.
14) Use after free in ravb_tstamp_skb, from Tho Vu.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
ravb: Fix use-after-free ravb_tstamp_skb
netfilter: nf_tables: map basechain priority to hardware priority
net: sched: use major priority number as hardware priority
wimax/i2400m: fix a memory leak bug
net: cavium: fix driver name
ibmvnic: Unmap DMA address of TX descriptor buffers after use
bnxt_en: Fix to include flow direction in L2 key
bnxt_en: Use correct src_fid to determine direction of the flow
bnxt_en: Suppress HWRM errors for HWRM_NVM_GET_VARIABLE command
bnxt_en: Fix handling FRAG_ERR when NVM_INSTALL_UPDATE cmd fails
bnxt_en: Improve RX doorbell sequence.
bnxt_en: Fix VNIC clearing logic for 57500 chips.
net: kalmia: fix memory leaks
cx82310_eth: fix a memory leak bug
bnx2x: Fix VF's VLAN reconfiguration in reload.
Bluetooth: Add debug setting for changing minimum encryption key size
tipc: fix false detection of retransmit failures
lan78xx: Fix memory leaks
MAINTAINERS: r8169: Update path to the driver
MAINTAINERS: PHY LIBRARY: Update files in the record
...
|
|
BIOS on Samsung 500C Chromebook reports very rudimentary E820 table that
consists of 2 entries:
BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] usable
BIOS-e820: [mem 0x00000000fffff000-0x00000000ffffffff] reserved
It breaks logic in find_trampoline_placement(): bios_start lands on the
end of the first 4k page and trampoline start gets placed below 0.
Detect underflow and don't touch bios_start for such cases. It makes
kernel ignore E820 table on machines that doesn't have two usable pages
below BIOS_START_MAX.
Fixes: 1b3a62643660 ("x86/boot/compressed/64: Validate trampoline placement against E820")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203463
Link: https://lkml.kernel.org/r/20190813131654.24378-1-kirill.shutemov@linux.intel.com
|
|
Some newer machines do not advertise legacy timers. The kernel can handle
that situation if the TSC and the CPU frequency are enumerated by CPUID or
MSRs and the CPU supports TSC deadline timer. If the CPU does not support
TSC deadline timer the local APIC timer frequency has to be known as well.
Some Ryzens machines do not advertize legacy timers, but there is no
reliable way to determine the bus frequency which feeds the local APIC
timer when the machine allows overclocking of that frequency.
As there is no legacy timer the local APIC timer calibration crashes due to
a NULL pointer dereference when accessing the not installed global clock
event device.
Switch the calibration loop to a non interrupt based one, which polls
either TSC (if frequency is known) or jiffies. The latter requires a global
clockevent. As the machines which do not have a global clockevent installed
have a known TSC frequency this is a non issue. For older machines where
TSC frequency is not known, there is no known case where the legacy timers
do not exist as that would have been reported long ago.
Reported-by: Daniel Drake <drake@endlessm.com>
Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Daniel Drake <drake@endlessm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908091443030.21433@nanos.tec.linutronix.de
Link: http://bugzilla.opensuse.org/show_bug.cgi?id=1142926#c12
|
|
No functional change.
Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1565945001-4413-1-git-send-email-suyj.fnst@cn.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Fix the inconsistent error handling in the umwait init code
- Rework the boot param zeroing so gcc9 stops complaining about out
of bound memset. The resulting source code is actually more sane to
read than the smart solution we had
- Maintainers update so Tony gets involved when Intel models are
added
- Some more fallthrough fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Save fields explicitly, zero out everything else
MAINTAINERS, x86/CPU: Tony Luck will maintain asm/intel-family.h
x86/fpu/math-emu: Address fallthrough warnings
x86/apic/32: Fix yet another implicit fallthrough warning
x86/umwait: Fix error handling in umwait_init()
|
|
Pull RISC-V fixes from Paul Walmsley:
- Two patches to fix significant bugs in floating point register
context handling
- A minor fix in RISC-V flush_tlb_page(), to supply a valid end address
to flush_tlb_range()
- Two minor defconfig additions: to build the virtio hwrng driver by
default (for QEMU targets), and to partially synchronize the 32-bit
defconfig with the 64-bit defconfig
* tag 'riscv/for-v5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Make __fstate_clean() work correctly.
riscv: Correct the initialized flow of FP register
riscv: defconfig: Update the defconfig
riscv: rv32_defconfig: Update the defconfig
riscv: fix flush_tlb_range() end address for flush_tlb_page()
|
|
Dave Hansen spelled out the rules in an e-mail:
https://lkml.kernel.org/r/91eefbe4-e32b-d762-be4d-672ff915db47@intel.com
Copy those right into the <asm/intel-family.h> file to make it easy for
people to find them.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190815224704.GA10025@agluck-desk2.amr.corp.intel.com
|
|
Pull Xtensa fix from Max Filippov:
"Add missing isync into cpu_reset to make sure ITLB changes are
effective"
* tag 'xtensa-20190816' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: add missing isync to the cpu_reset TLB code
|
|
Pull arm64 fixes from Catalin Marinas:
- Don't taint the kernel if CPUs have different sets of page sizes
supported (other than the one in use).
- Issue I-cache maintenance for module ftrace trampoline.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ftrace: Ensure module ftrace trampoline is coherent with I-side
arm64: cpufeature: Don't treat granule sizes as strict
|
|
The initial support for dynamic ftrace trampolines in modules made use
of an indirect branch which loaded its target from the beginning of
a special section (e71a4e1bebaf7 ("arm64: ftrace: add support for far
branches to dynamic ftrace")). Since no instructions were being patched,
no cache maintenance was needed. However, later in be0f272bfc83 ("arm64:
ftrace: emit ftrace-mod.o contents through code") this code was reworked
to output the trampoline instructions directly into the PLT entry but,
unfortunately, the necessary cache maintenance was overlooked.
Add a call to __flush_icache_range() after writing the new trampoline
instructions but before patching in the branch to the trampoline.
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: James Morse <james.morse@arm.com>
Cc: <stable@vger.kernel.org>
Fixes: be0f272bfc83 ("arm64: ftrace: emit ftrace-mod.o contents through code")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Recent gcc compilers (gcc 9.1) generate warnings about an out of bounds
memset, if the memset goes accross several fields of a struct. This
generated a couple of warnings on x86_64 builds in sanitize_boot_params().
Fix this by explicitly saving the fields in struct boot_params
that are intended to be preserved, and zeroing all the rest.
[ tglx: Tagged for stable as it breaks the warning free build there as well ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190731054627.5627-2-jhubbard@nvidia.com
|
|
Pull fallthrough fixes from Gustavo A. R. Silva:
"Fix sh mainline builds:
- Fix fall-through warning in sh.
- Fix missing break bug in sh (this is a 10-year-old bug)
Currently, mainline builds for sh are broken. These patches fix that"
* tag 'Wimplicit-fallthrough-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
sh: kernel: hw_breakpoint: Fix missing break in switch statement
sh: kernel: disassemble: Mark expected switch fall-throughs
|
|
Make the __fstate_clean() function correctly set the
state of sstatus.FS in pt_regs to SR_FS_CLEAN.
Fixes: 7db91e57a0acd ("RISC-V: Task implementation")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[paul.walmsley@sifive.com: expanded "Fixes" commit ID]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
The following two reasons cause FP registers are sometimes not
initialized before starting the user program.
1. Currently, the FP context is initialized in flush_thread() function
and we expect these initial values to be restored to FP register when
doing FP context switch. However, the FP context switch only occurs in
switch_to function. Hence, if this process does not be scheduled out
and scheduled in before entering the user space, the FP registers
have no chance to initialize.
2. In flush_thread(), the state of reg->sstatus.FS inherits from the
parent. Hence, the state of reg->sstatus.FS may be dirty. If this
process is scheduled out during flush_thread() and initializing the
FP register, the fstate_save() in switch_to will corrupt the FP context
which has been initialized until flush_thread().
To solve the 1st case, the initialization of the FP register will be
completed in start_thread(). It makes sure all FP registers are initialized
before starting the user program. For the 2nd case, the state of
reg->sstatus.FS in start_thread will be set to SR_FS_OFF to prevent this
process from corrupting FP context in doing context save. The FP state is
set to SR_FS_INITIAL in start_trhead().
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 7db91e57a0acd ("RISC-V: Task implementation")
Cc: stable@vger.kernel.org
[paul.walmsley@sifive.com: fixed brace alignment issue reported by
checkpatch]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Pull dma-mapping fixes from Christoph Hellwig:
- fix the handling of the bus_dma_mask in dma_get_required_mask, which
caused a regression in this merge window (Lucas Stach)
- fix a regression in the handling of DMA_ATTR_NO_KERNEL_MAPPING (me)
- fix dma_mmap_coherent to not cause page attribute mismatches on
coherent architectures like x86 (me)
* tag 'dma-mapping-5.3-4' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: fix page attributes for dma_mmap_*
dma-direct: don't truncate dma_required_mask to bus addressing capabilities
dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING
|
|
new_entry is reassigned a new value next line. So
it's redundant and remove it.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
recalculate_apic_map does not santize ldr and it's possible that
multiple bits are set. In that case, a previous valid entry
can potentially be overwritten by an invalid one.
This condition is hit when booting a 32 bit, >8 CPU, RHEL6 guest and then
triggering a crash to boot a kdump kernel. This is the sequence of
events:
1. Linux boots in bigsmp mode and enables PhysFlat, however, it still
writes to the LDR which probably will never be used.
2. However, when booting into kdump, the stale LDR values remain as
they are not cleared by the guest and there isn't a apic reset.
3. kdump boots with 1 cpu, and uses Logical Destination Mode but the
logical map has been overwritten and points to an inactive vcpu.
Signed-off-by: Radim Krcmar <rkrcmar@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Update the defconfig:
- Add CONFIG_HW_RANDOM=y and CONFIG_HW_RANDOM_VIRTIO=y to enable
VirtIORNG when running on QEMU
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Update the rv32_defconfig:
- Add 'CONFIG_DEVTMPFS_MOUNT=y' to match the RISC-V defconfig
- Add CONFIG_HW_RANDOM=y and CONFIG_HW_RANDOM_VIRTIO=y to enable
VirtIORNG when running on QEMU
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
The RISC-V kernel implementation of flush_tlb_page() when CONFIG_SMP
is set is wrong. It passes zero to flush_tlb_range() as the final
address to flush, but it should be at least 'addr'.
Some other Linux architecture ports use the beginning address to
flush, plus PAGE_SIZE, as the final address to flush. This might
flush slightly more than what's needed, but it seems unlikely that
being more clever would improve anything. So let's just take that
implementation for now.
While here, convert the macro into a static inline function, primarily
to avoid unintentional multiple evaluations of 'addr'.
This second version of the patch fixes a coding style issue found by
Christoph Hellwig <hch@lst.de>.
Reported-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
If a CPU doesn't support the page size for which the kernel is
configured, then we will complain and refuse to bring it online. For
secondary CPUs (and the boot CPU on a system booting with EFI), we will
also print an error identifying the mismatch.
Consequently, the only time that the cpufeature code can detect a
granule size mismatch is for a granule other than the one that is
currently being used. Although we would rather such systems didn't
exist, we've unfortunately lost that battle and Kevin reports that
on his amlogic S922X (odroid-n2 board) we end up warning and taining
with defconfig because 16k pages are not supported by all of the CPUs.
In such a situation, we don't actually care about the feature mismatch,
particularly now that KVM only exposes the sanitised view of the CPU
registers (commit 93390c0a1b20 - "arm64: KVM: Hide unsupported AArch64
CPU features from guests"). Treat the granule fields as non-strict and
let Kevin run without a tainted kernel.
Cc: Marc Zyngier <maz@kernel.org>
Reported-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
[catalin.marinas@arm.com: changelog updated with KVM sanitised regs commit]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
ITLB entry modifications must be followed by the isync instruction
before the new entries are possibly used. cpu_reset lacks one isync
between ITLB way 6 initialization and jump to the identity mapping.
Add missing isync to xtensa cpu_reset.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
/home/tglx/work/kernel/linus/linux/arch/x86/math-emu/errors.c: In function ‘FPU_printall’:
/home/tglx/work/kernel/linus/linux/arch/x86/math-emu/errors.c:187:9: warning: this statement may fall through [-Wimplicit-fallthrough=]
tagi = FPU_Special(r);
~~~~~^~~~~~~~~~~~~~~~
/home/tglx/work/kernel/linus/linux/arch/x86/math-emu/errors.c:188:3: note: here
case TAG_Valid:
^~~~
/home/tglx/work/kernel/linus/linux/arch/x86/math-emu/fpu_trig.c: In function ‘fyl2xp1’:
/home/tglx/work/kernel/linus/linux/arch/x86/math-emu/fpu_trig.c:1353:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (denormal_operand() < 0)
^
/home/tglx/work/kernel/linus/linux/arch/x86/math-emu/fpu_trig.c:1356:3: note: here
case TAG_Zero:
Remove the pointless 'break;' after 'continue;' while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Fix
arch/x86/kernel/apic/probe_32.c: In function ‘default_setup_apic_routing’:
arch/x86/kernel/apic/probe_32.c:146:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!APIC_XAPIC(version)) {
^
arch/x86/kernel/apic/probe_32.c:151:3: note: here
case X86_VENDOR_HYGON:
^~~~
for 32-bit builds.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190811154036.29805-1-bp@alien8.de
|
|
Currently, failure of cpuhp_setup_state() is ignored and the syscore ops
and the control interfaces can still be added even after the failure. But,
this error handling will cause a few issues:
1. The CPUs may have different values in the IA32_UMWAIT_CONTROL
MSR because there is no way to roll back the control MSR on
the CPUs which already set the MSR before the failure.
2. If the sysfs interface is added successfully, there will be a mismatch
between the global control value and the control MSR:
- The interface shows the default global control value. But,
the control MSR is not set to the value because the CPU online
function, which is supposed to set the MSR to the value,
is not installed.
- If the sysadmin changes the global control value through
the interface, the control MSR on all current online CPUs is
set to the new value. But, the control MSR on newly onlined CPUs
after the value change will not be set to the new value due to
lack of the CPU online function.
3. On resume from suspend/hibernation, the boot CPU restores the control
MSR to the global control value through the syscore ops. But, the
control MSR on all APs is not set due to lake of the CPU online
function.
To solve the issues and enforce consistent behavior on the failure
of the CPU hotplug setup, make the following changes:
1. Cache the original control MSR value which is configured by
hardware or BIOS before kernel boot. This value is likely to
be 0. But it could be a different number as well. Cache the
control MSR only once before the MSR is changed.
2. Add the CPU offline function so that the MSR is restored to the
original control value on all CPUs on the failure.
3. On the failure, exit from cpumait_init() so that the syscore ops
and the control interfaces are not added.
Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1565401237-60936-1-git-send-email-fenghua.yu@intel.com
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2019-08-11
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) x64 JIT code generation fix for backward-jumps to 1st insn, from Alexei.
2) Fix buggy multi-closing of BTF file descriptor in libbpf, from Andrii.
3) Fix libbpf_num_possible_cpus() to make it thread safe, from Takshak.
4) Fix bpftool to dump an error if pinning fails, from Jakub.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add missing break statement in order to prevent the code from falling
through to case SH_BREAKPOINT_WRITE.
Fixes: 09a072947791 ("sh: hw-breakpoints: Add preliminary support for SH-4A UBC.")
Cc: stable@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
Remove logically dead code and mark switch cases where we are expecting
to fall through.
Fix the following warnings (Building: defconfig sh):
arch/sh/kernel/disassemble.c:478:8: warning: this statement may fall
through [-Wimplicit-fallthrough=]
arch/sh/kernel/disassemble.c:487:8: warning: this statement may fall
through [-Wimplicit-fallthrough=]
arch/sh/kernel/disassemble.c:496:8: warning: this statement may fall
through [-Wimplicit-fallthrough=]
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
Pull RISC-V updates from Paul Walmsley:
"A few minor RISC-V updates for v5.3-rc4:
- Remove __udivdi3() from the 32-bit Linux port, converting the only
upstream user to use do_div(), per Linux policy
- Convert the RISC-V standard clocksource away from per-cpu data
structures, since only one is used by Linux, even on a multi-CPU
system
- A set of DT binding updates that remove an obsolete text binding in
favor of a YAML binding, fix a bogus compatible string in the
schema (thus fixing a "make dtbs_check" warning), and clarifies the
future values expected in one of the RISC-V CPU properties"
* tag 'riscv/for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board
dt-bindings: riscv: remove obsolete cpus.txt
RISC-V: Remove udivdi3
riscv: delay: use do_div() instead of __udivdi3()
dt-bindings: Update the riscv,isa string description
RISC-V: Remove per cpu clocksource
|
|
Pull x86 fixes from Thomas Gleixner:
"A few fixes for x86:
- Don't reset the carefully adjusted build flags for the purgatory
and remove the unwanted flags instead. The 'reset all' approach led
to build fails under certain circumstances.
- Unbreak CLANG build of the purgatory by avoiding the builtin
memcpy/memset implementations.
- Address missing prototype warnings by including the proper header
- Fix yet more fall-through issues"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/lib/cpu: Address missing prototypes warning
x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS
x86/purgatory: Do not use __builtin_memcpy and __builtin_memset
x86: mtrr: cyrix: Mark expected switch fall-through
x86/ptrace: Mark expected switch fall-through
|
|
A compilation -Wimplicit-fallthrough warning was enabled by commit
a035d552a93b ("Makefile: Globally enable fall-through warning")
Even though clang 10.0.0 does not currently support this warning without
a patch, clang currently does not support a value for this option.
Link: https://bugs.llvm.org/show_bug.cgi?id=39382
The gcc default for this warning is 3 so removing the =3 has no effect
for gcc and enables the warning for patched versions of clang.
Also remove the =3 from an existing use in a parisc Makefile:
arch/parisc/math-emu/Makefile
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-and-tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
All the way back to introducing dma_common_mmap we've defaulted to mark
the pages as uncached. But this is wrong for DMA coherent devices.
Later on DMA_ATTR_WRITE_COMBINE also got incorrect treatment as that
flag is only treated special on the alloc side for non-coherent devices.
Introduce a new dma_pgprot helper that deals with the check for coherent
devices so that only the remapping cases ever reach arch_dma_mmap_pgprot
and we thus ensure no aliasing of page attributes happens, which makes
the powerpc version of arch_dma_mmap_pgprot obsolete and simplifies the
remaining ones.
Note that this means arch_dma_mmap_pgprot is a bit misnamed now, but
we'll phase it out soon.
Fixes: 64ccc9c033c6 ("common: dma-mapping: add support for generic dma_mmap_* calls")
Reported-by: Shawn Anastasio <shawn@anastas.io>
Reported-by: Gavin Li <git@thegavinli.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> # arm64
|
|
Pull powerpc fix from Michael Ellerman:
"Just one fix, a revert of a commit that was meant to be a minor
improvement to some inline asm, but ended up having no real benefit
with GCC and broke booting 32-bit machines when using Clang.
Thanks to: Arnd Bergmann, Christophe Leroy, Nathan Chancellor, Nick
Desaulniers, Segher Boessenkool"
* tag 'powerpc-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc: slightly improve cache helpers"
|
|
Pull fall-through fixes from Gustavo A. R. Silva:
"Mark more switch cases where we are expecting to fall through, fixing
fall-through warnings in arm, sparc64, mips, i386 and s390"
* tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
ARM: ep93xx: Mark expected switch fall-through
scsi: fas216: Mark expected switch fall-throughs
pcmcia: db1xxx_ss: Mark expected switch fall-throughs
video: fbdev: omapfb_main: Mark expected switch fall-throughs
watchdog: riowd: Mark expected switch fall-through
s390/net: Mark expected switch fall-throughs
crypto: ux500/crypt: Mark expected switch fall-throughs
watchdog: wdt977: Mark expected switch fall-through
watchdog: scx200_wdt: Mark expected switch fall-through
watchdog: Mark expected switch fall-throughs
ARM: signal: Mark expected switch fall-through
mfd: omap-usb-host: Mark expected switch fall-throughs
mfd: db8500-prcmu: Mark expected switch fall-throughs
ARM: OMAP: dma: Mark expected switch fall-throughs
ARM: alignment: Mark expected switch fall-throughs
ARM: tegra: Mark expected switch fall-through
ARM/hw_breakpoint: Mark expected switch fall-throughs
|
Linus Torvalds
Qian Cai
Sean Christopherson
Johannes Berg
John Hubbard
Paolo Bonzini
Gustavo A. R. Silva
Christoph Hellwig
Tom Lendacky
Kirill A. Shutemov
Thomas Gleixner
Su Yanjun
Tony Luck
Will Deacon
Vincent Chen
Miaohe Lin
Radim Krcmar
Alistair Francis
Paul Walmsley
Max Filippov
Borislav Petkov
Fenghua Yu
David S. Miller
Joe Perches