aboutsummaryrefslogtreecommitdiffstats
path: root/arch (follow)
AgeCommit message (Collapse)AuthorFilesLines
2009-07-08x86: don't clear nodes_states[N_NORMAL_MEMORY] when numa is not compiled inYinghai Lu1-2/+9
Alex found that specjbb2005 still can not run with hugepages on an x86-64 machine. This only happens when numa is not compiled in. The root cause: node_set_state will not set it back for us in that case, so don't clear that when numa is not select in config [ v2: use node_clear_state instead ] Reported-and-Tested-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08Remove multiple KERN_ prefixes from printk formatsJoe Perches16-102/+99
Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-08Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds2-20/+13
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Powernow-k8: support family 0xf with 2 low p-states [CPUFREQ] fix (utter) cpufreq_add_dev mess [CPUFREQ] Cleanup locking in conservative governor [CPUFREQ] Cleanup locking in ondemand governor [CPUFREQ] Mark policy_rwsem as going static in cpufreq.c wont be exported [CPUFREQ] Eliminate the recent lockdep warnings in cpufreq
2009-07-08Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6Linus Torvalds1-1/+1
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Clear -EAGAIN in dpm_prepare x86: Fix resume from suspend when CONFIG_CC_STACKPROTECTOR
2009-07-08Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds25-129/+225
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Don't use alloc_bootmem() in init_IRQ() path powerpc: Fix spin_event_timeout() to be robust over context switches powerpc: Use pr_devel() in do_dcache_icache_coherency() powerpc/cell: Use pr_devel() in axon_msi.c powerpc: Use pr_devel() in arch/powerpc/mm/gup.c powerpc: Cleanup & use pr_devel() in arch/powerpc/mm/slb.c powerpc/perf_counter: Remove duplicated #include powerpc: Use pr_devel() in arch/powerpc/mm/mmu_context_nohash.c powerpc/pseries: Use pr_devel() in xics.c powerpc: Remove unnecessary semicolons powerpc/pseries: Use pr_devel() in pseries LPAR HPTE routines powerpc/44x: Fix build error with -Werror for Warp platform powerpc/4xx: Have Warp take advantage of GPIO LEDs default-state = keep powerpc/44x: Update Warp defconfig
2009-07-08Merge branch 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2-0/+40
* 'sh/for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: fix sci interrupt handler video: hitfb: Move over to dev_pm_ops. video: hitfb: Convert to framebuffer_alloc(). video: sh_mobile_lcdcfb: Convert to framebuffer_alloc(). sh: add r8a66597 usb0 host to the se7724 board usb: allow sh7724 to enable on-chip r8a66597 sh-sci: update receive error handling for muxed irqs sh: define PERF_COUNTER_INDEX_OFFSET.
2009-07-08x86: Fix resume from suspend when CONFIG_CC_STACKPROTECTORPeter Chubb1-1/+1
Patch 08687aec71bc9134fe336e561f6did877bacf74fc0a (x86: unify power/cpu_(32|64).c) renamed cpu_32.c to cpu.c, but did not update the special compilation flags for the file for the new name. This patch fixes the compilation flags, and therefore fixes resume from suspend on my Acer Aspire One. [rjw: The regression from 2.6.30 fixed by this patch is tracked as http://bugzilla.kernel.org/show_bug.cgi?id=13661] Signed-off-by: Peter Chubb <peterc@nicta.com.au> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-07-08powerpc: Don't use alloc_bootmem() in init_IRQ() pathAnton Vorontsov5-14/+8
This patch fixes various badnesses like this for all interrupt controllers: ------------[ cut here ]------------ Badness at c04db9dc [verbose debug info unavailable] NIP: c04db9dc LR: c04db9ac CTR: 00000000 REGS: c053de30 TRAP: 0700 Not tainted (2.6.31-rc1-00432-ge69b2b5-dirty) MSR: 00021000 <ME,CE> CR: 22020084 XER: 00000000 TASK = c0500480[0] 'swapper' THREAD: c053c000 GPR00: 00000001 c053dee0 c0500480 00000000 00000050 00000020 3fffffff 00000000 GPR08: 00000001 c0540000 e0080080 00000000 22000084 64183600 3ff8f800 00000000 GPR16: 841b0240 449a0303 00000000 00000000 00000000 00000000 00000000 c04f5bf4 GPR24: 00000000 00000000 00000000 00000050 00000020 00000000 3fffffff 00000050 NIP [c04db9dc] alloc_arch_preferred_bootmem+0x48/0x74 LR [c04db9ac] alloc_arch_preferred_bootmem+0x18/0x74 Call Trace: [c053dee0] [c000a5a4] __of_address_to_resource+0x44/0xd0 (unreliable) [c053def0] [c04dba58] ___alloc_bootmem_nopanic+0x50/0x108 [c053df20] [c04dbb28] ___alloc_bootmem+0x18/0x50 [c053df30] [c04d5de0] qe_ic_init+0x5c/0x1b0 [c053df70] [c04d77b0] mpc85xx_mds_pic_init+0xb8/0x10c [c053dfb0] [c04cf374] init_IRQ+0x28/0x3c p.s. commit 85355bb272db31a3f2dd99d547eef794805e1319 ("powerpc: Fix mpic alloc warning") missed some alloc_bootmem() instances, this is now fixed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc: Fix spin_event_timeout() to be robust over context switchesGrant Likely1-0/+2
Current implementation of spin_event_timeout can be interrupted by an IRQ or context switch after testing the condition, but before checking the timeout. This can cause the loop to report a timeout when the condition actually became true in the middle. This patch adds one final check of the condition upon exit of the loop if the last test of the condition was still false. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc: Use pr_devel() in do_dcache_icache_coherency()Michael Ellerman1-2/+2
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 2036 368 8 2412 96c arch/powerpc/mm/pgtable.o size after: text data bss dec hex filename 1677 248 8 1933 78d arch/powerpc/mm/pgtable.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc/cell: Use pr_devel() in axon_msi.cMichael Ellerman1-11/+11
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 7083 1616 0 8699 21fb arch/powerpc/../axon_msi.o size after: text data bss dec hex filename 5772 1208 0 6980 1b44 arch/powerpc/../axon_msi.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc: Use pr_devel() in arch/powerpc/mm/gup.cMichael Ellerman1-5/+5
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 3252 384 0 3636 e34 arch/powerpc/mm/gup.o size after: text data bss dec hex filename 2576 96 0 2672 a70 arch/powerpc/mm/gup.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc: Cleanup & use pr_devel() in arch/powerpc/mm/slb.cMichael Ellerman1-10/+3
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 3261 416 4 3681 e61 arch/powerpc/mm/slb.o size after: text data bss dec hex filename 2861 248 4 3113 c29 arch/powerpc/mm/slb.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc/perf_counter: Remove duplicated #includeHuang Weiyi2-2/+0
Remove duplicated #include('s) in arch/powerpc/kernel/mpc7450-pmu.c arch/powerpc/kernel/ppc970-pmu.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc: Use pr_devel() in arch/powerpc/mm/mmu_context_nohash.cMichael Ellerman1-8/+8
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 1508 48 28 1584 630 powerpc/mm/mmu_context_nohash.o size after: text data bss dec hex filename 1088 0 28 1116 45c powerpc/mm/mmu_context_nohash.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc/pseries: Use pr_devel() in xics.cMichael Ellerman1-4/+4
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 7720 5488 296 13504 34c0 platforms/pseries/xics.o size after: text data bss dec hex filename 7535 5456 296 13287 33e7 platforms/pseries/xics.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc: Remove unnecessary semicolonsJoe Perches7-8/+7
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08powerpc/pseries: Use pr_devel() in pseries LPAR HPTE routinesMichael Ellerman1-9/+9
pr_debug() can now result in code being generated even when DEBUG is not defined. That's not really desirable in some places. In particular, pSeries_lpar_hpte_insert() goes from 185 instructions to 77 instructions as a result of this patch. Luckily that code isn't called very often ... With CONFIG_DYNAMIC_DEBUG=y: size before: text data bss dec hex filename 7284 1552 296 9132 23ac platforms/pseries/lpar.o size after: text data bss dec hex filename 5806 1096 296 7198 1c1e platforms/pseries/lpar.o Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-08Merge commit 'jwb/merge' into mergeBenjamin Herrenschmidt3-56/+166
2009-07-07Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh/for-2.6.31Paul Mundt171-2490/+4066
2009-07-06[CPUFREQ] Powernow-k8: support family 0xf with 2 low p-statesMark Langsdorf2-20/+13
Provide support for family 0xf processors with 2 P-states below the elevator voltage. Remove the checks that prevent this configuration from being supported and increase the transition voltage to prevent errors during the transition. Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> Signed-off-by: Dave Jones <davej@redhat.com>
2009-07-06Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tipLinus Torvalds14-49/+37
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix usage of bios intcall() x86: Remove unused function lapic_watchdog_ok() x86: Remove unused variable disable_x2apic x86, kvm: Fix section mismatches in kvm.c x86: Add missing annotation to arch/x86/lib/copy_user_64.S::copy_to_user x86: Fix fixmap page order for FIX_TEXT_POKE0,1 amd-iommu: set evt_buf_size correctly amd-iommu: handle alias entries correctly in init code x86: Fix printk call in print_local_apic() x86: Declare check_efer() before it gets used x86: Mark device_nb as static and fix NULL noise x86: Remove double declaration of MSR_P6_EVNTSEL0 and MSR_P6_EVNTSEL1 xen: Use kcalloc() in xen_init_IRQ() x86: Fix fixmap ordering x86: Fix symbol annotation for arch/x86/lib/clear_page_64.S::clear_page_c
2009-07-06Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds5-410/+1015
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] amba: fix amba device resources [ARM] pgtable: file pte layout documentation [ARM] pgtable: swp pte layout documentation, definitions, and check [ARM] export __cpu_flush_dcache_page [ARM] 5576/1: Update kb9202_defconfig [ARM] 5581/1: U300 clock updates [ARM] 5579/1: Updated U300 defconfig
2009-07-06Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds4-42/+31
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Fix IRQ swizzling for ARI-enabled devices ia64/PCI: adjust section annotation for pcibios_setup() x86/PCI: get root CRS before scanning children x86/PCI: fix boundary checking when using root CRS PCI MSI: Fix restoration of MSI/MSI-X mask states in suspend/resume PCI MSI: Unmask MSI if setup failed PCI MSI: shorten PCI_MSIX_ENTRY_* symbol names PCI: make pci_name() take const argument PCI: More PATA quirks for not entering D3 PCI: fix kernel-doc warnings PCI: check if bus has a proper bridge device before triggering SBR PCI: remove pci_dac_dma_... APIs on mn10300 PCI ECRC: Remove unnecessary semicolons PCI MSI: Return if alloc_msi_entry for MSI-X failed
2009-07-06Merge branch 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds49-1803/+120
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix cast warning for init.c microblaze: Wire up new syscalls microblaze: use generic syscalls.h microblaze: clean up signal handling microblaze: convert all simple headers to use asm-generic microblaze: use the generic lib/checksum.c microblaze: fall back on generic header files for the ABI
2009-07-06Merge git://git.infradead.org/iommu-2.6Linus Torvalds1-0/+12
* git://git.infradead.org/iommu-2.6: intel-iommu: Don't use identity mapping for PCI devices behind bridges intel-iommu: Use iommu_should_identity_map() at startup time too. intel-iommu: No mapping for non-PCI devices intel-iommu: Restore DMAR_BROKEN_GFX_WA option for broken graphics drivers intel-iommu: Add iommu_should_identity_map() function intel-iommu: Fix reattaching of devices to identity mapping domain intel-iommu: Don't set identity mapping for bypassed graphics devices intel-iommu: Fix dma vs. mm page confusion with aligned_nrpages()
2009-07-06gcov: exclude code operating in userspace from profilingPeter Oberparleiter1-0/+2
Fix for this issue on x86_64: rostedt@goodmis.org wrote: > On bootup of the latest kernel my init segfaults. Debugging it, > I found that vread_tsc (a vsyscall) increments some strange > kernel memory: > > 0000000000000000 <vread_tsc>: > 0: 55 push %rbp > 1: 48 ff 05 00 00 00 00 incq 0(%rip) > # 8 <vread_tsc+0x8> > 4: R_X86_64_PC32 .bss+0x3c > 8: 48 89 e5 mov %rsp,%rbp > b: 66 66 90 xchg %ax,%ax > e: 48 ff 05 00 00 00 00 incq 0(%rip) > # 15 <vread_tsc+0x15> > 11: R_X86_64_PC32 .bss+0x44 > 15: 66 66 90 xchg %ax,%ax > 18: 48 ff 05 00 00 00 00 incq 0(%rip) > # 1f <vread_tsc+0x1f> > 1b: R_X86_64_PC32 .bss+0x4c > 1f: 0f 31 rdtsc > > > Those "incq" is very bad to happen in vsyscall memory, since > userspace can not modify it. You need to make something prevent > profiling of vsyscall memory (like I do with ftrace). Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Reported-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-06microblaze: Fix cast warning for init.cMichal Simek1-3/+3
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-06microblaze: Wire up new syscallsMichal Simek2-1/+5
Wire up new syscalls rt_tgsigqueueinfo and perf_counter_open. Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-06microblaze: use generic syscalls.hArnd Bergmann6-62/+28
The prototypes in syscalls.h all make sense for microblaze, but for some of them, the actual implementation in sys_microblaze.c needs to be adapted. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-06microblaze: clean up signal handlingArnd Bergmann7-345/+43
When legacy signal handling is disabled, the arch/microblaze/kernel/signal.c implementation can be much simpler, as most of it is handled generically from kernel/signal.c. This is also a prerequisite for using the generic asm/unistd.h, which does not provide __NR_sigreturn, because this macro is referenced by the current signal.c implementation. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-06microblaze: convert all simple headers to use asm-genericRemis Lima Baima19-266/+21
All the simple microblaze header files were adapted to use their asm-generic implementations. These files are more simple and were quite straightforward to change. fb.h, vga.h and parport.h previously did not exist, using the generic version makes it possible to build more drivers successfully in allyesonfig. Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-06microblaze: use the generic lib/checksum.cRemis Lima Baima4-241/+6
The microblaze checksum code is mostly identical to the asm-generic+lib version, so use that instead. Signed-off-by: Remis Lima Baima <remis.developer@googlemail.com> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-06microblaze: fall back on generic header files for the ABIArnd Bergmann17-887/+16
Almost all of the ABI relevant header files now have generic versions, so use those now in order to reduce the amount of architecture specific code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-07-05[ARM] pgtable: file pte layout documentationRussell King1-9/+14
Document the layout of our file PTE entries. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-05[ARM] pgtable: swp pte layout documentation, definitions, and checkRussell King1-5/+25
Document the layout of our swp PTE entries, adding definitions for the bit masks/shifts/sizes, and implement MAX_SWAPFILES_CHECK() such that we fail to build if we are unable to properly encode the swp type field. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-05[ARM] export __cpu_flush_dcache_pageRussell King1-0/+1
Now required for libsas: Kernel: arch/arm/boot/Image is ready Kernel: arch/arm/boot/zImage is ready Building modules, stage 2. MODPOST 1096 modules ERROR: "xscale_flush_kern_dcache_page" [drivers/scsi/libsas/libsas.ko] undefined! Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-05powerpc/44x: Fix build error with -Werror for Warp platformJosh Boyer1-0/+3
With -Werror enabled during the build, the warp.c file fails to build due to the temp_isr function not containing a return statement. This fixes the build error and documents that the function never returns. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-07-06powerpc/4xx: Have Warp take advantage of GPIO LEDs default-state = keepSean MacLennan2-13/+6
The GPIO LEDS driver now has a default state of "keep". Update the Warp DTS and platform file to take advantage of this new state. This removes the hardcoding of the two LEDs on the Warp. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-07-06powerpc/44x: Update Warp defconfigSean MacLennan1-43/+157
* Enable GPIO LEDS and LED triggers * Move to SLUB * Enable HOTPLUG * Enable timestamps on printks * Enable UBIFS * Enable in-kernel config Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-07-04x86: fix usage of bios intcall()Akinobu Mita2-4/+3
Some intcall() misuses the input biosregs as output in cf06de7b9cdd3efee7a59dced1977b3c21d43732 This fixes the problem vga=ask boot option doesn't show enough modes. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> LKML-Reference: <20090701021307.GA3127@localhost.localdomain> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-07-04Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds23-188/+173
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: (27 commits) parisc: use generic atomic64 on 32-bit parisc: superio: fix build breakage parisc: Fix PCI resource allocation on non-PAT SBA machines parisc: perf: wire up sys_perf_counter_open parisc: add task_pt_regs macro parisc: wire sys_perf_counter_open to sys_ni_syscall parisc: inventory.c, fix bloated stack frame parisc: processor.c, fix bloated stack frame parisc: fix compile warning in mm/init.c parisc: remove dead code from sys_parisc32.c parisc: wire up rt_tgsigqueueinfo parisc: ensure broadcast tlb purge runs single threaded parisc: fix "delay!" timer handling parisc: fix mismatched parenthesis in memcpy.c parisc: Fix gcc 4.4 warning in lba_pci.c parisc: add parameter to read_cr16() parisc: decode_exc.c should include kernel.h parisc: remove obsolete hw_interrupt_type parisc: fix irq compile bugs in arch/parisc/kernel/irq.c parisc: advertise PCI devs after "assign_resources" ... Manually fixed up trivial conflicts in tools/perf/perf.h due to addition of SH vs HPPA perf-counter support.
2009-07-04Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds91-449/+3731
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: MIPS: Fix CONFIG_FLATMEM version of pfn_valid() MIPS: Reorganize Cavium OCTEON PCI support. Update Yoichi Yuasa's e-mail address MIPS: Allow suspend and hibernation again on uniprocessor kernels. MIPS: 64-bit: Fix o32 core dump MIPS: BC47xx: Fix SSB irq setup MIPS: CMP: Update sync-r4k for current kernel MIPS: CMP: Move gcmp_probe to before the SMP ops MIPS: CMP: activate CMP support MIPS: CMP: Extend IPI handling to CPU number MIPS: CMP: Extend the GIC IPI interrupts beyond 32 MIPS: Define __arch_swab64 for all mips r2 cpus MIPS: Update VR41xx GPIO driver to use gpiolib MIPS: Hookup new syscalls sys_rt_tgsigqueueinfo and sys_perf_counter_open. MIPS: Malta: Remove unnecessary function prototypes MIPS: MT: Remove unnecessary semicolons MIPS: Add support for Texas Instruments AR7 System-on-a-Chip
2009-07-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixesLinus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kbuild: finally remove the obsolete variable $TOPDIR gitignore: ignore scripts/ihex2fw Kbuild: Disable the -Wformat-security gcc flag gitignore: ignore gcov output files kbuild: deb-pkg ship changelog Add new __init_task_data macro to be used in arch init_task.c files. asm-generic/vmlinux.lds.h: shuffle INIT_TASK* macro names in vmlinux.lds.h Add new macros for page-aligned data and bss sections. asm-generic/vmlinux.lds.h: Fix up RW_DATA_SECTION definition.
2009-07-05sh: add r8a66597 usb0 host to the se7724 boardMagnus Damm1-0/+38
Add USB host support for port CN27 on the Solution Engine 7724 board. The r8a66597-hcd driver is hooked up as a platform device and some registers are configured to enable the USB host function. The hardware driving the USB port is the on-chip USB0 block in the sh7724 processor configured as USB host controller. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-04intel-iommu: Restore DMAR_BROKEN_GFX_WA option for broken graphics driversDavid Woodhouse1-0/+12
We need to give people a little more time to fix the broken drivers. Re-introduce this, but tied in properly with the 'iommu=pt' support this time. Change the config option name and make it default to 'no' too. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-07-03MIPS: Fix CONFIG_FLATMEM version of pfn_valid()Ralf Baechle1-1/+8
For systems which do not define PHYS_OFFSET as 0 pfn_valid() may falsely have returned 0 on most configurations. Bug introduced by commit 752fbeb2e3555c0d236e992f1195fd7ce30e728d (linux-mips.org) rsp. 6f284a2ce7b8bc49cb8455b1763357897a899abb (kernel.org) titled "[MIPS] FLATMEM: introduce PHYS_OFFSET." Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: Reorganize Cavium OCTEON PCI support.David Daney8-221/+197
Move the cavium PCI files to the arch/mips/pci directory. Also cleanup comment formatting and code layout. Code from pci-common.c, was moved into other files. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03Update Yoichi Yuasa's e-mail addressYoichi Yuasa45-59/+59
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-07-03MIPS: Allow suspend and hibernation again on uniprocessor kernels.Ralf Baechle1-2/+2
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Pavel Machek <pavel@ucw.cz>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.