aboutsummaryrefslogtreecommitdiffstats
path: root/arch (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-10-04sh: mach-x3proto: Move the ilsel header to a better place.Paul Mundt3-2/+2
We'll be adding more headers for this board, so move this over to its own directory. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-03sh: Allow GPIO chips to register IRQ mappings.Paul Mundt1-4/+2
As non-PFC chips are added that may support IRQs, pass through to the generic helper instead of triggering the WARN_ON(). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02sh: Support early IRQ vector map reservation for delayed controllers.Paul Mundt2-9/+17
Some controllers will need to be initialized lazily due to pinmux constraints, while others may simply have no need to be brought online if there are no backing devices for them attached. In this case it's still necessary to be able to reserve their hardware vector map before dynamic IRQs get a hold of them. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02sh: Handle pinmux for SH-X3 proto IRQ/IRL modes.Paul Mundt2-0/+25
The SH-X3 proto CPU has all of the external IRQ and IRL pins muxed, make sure that we're able to grab them before attempting to register their respective IRQ controllers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02sh: pinmux support for SH-X3 proto CPUs.Paul Mundt3-0/+652
This adds in support for GPIO/pinmux on the SH-X3 proto CPUs. This will subsequently be used by the x3proto board. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02sh: Support IRQ balancing for SH-X3 proto cores, too.Paul Mundt1-4/+11
This adds in hardware IRQ auto-distribution support for SH-X3 proto CPUs, following the SH7786 support. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02sh: Support userimask for all SH-X3 interrupt controllers.Paul Mundt3-18/+36
This shuffles some of the shared bits out of the 7786 code and in to a shared SH-X3 support file. Presently just for userimask, but also a good place for the IRQ balancing wrappers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-01sh: Update SH-X3 subtype for clkdev lookups.Paul Mundt3-85/+146
Rewrite the SH-X3 proto CPU clock framework for clkdev. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-30sh: boot kernel with SR.BL setMagnus Damm3-2/+7
Update the SH kernel to keep SR.BL set until the VBR register has been initialized. Useful to allow boot of the kernel even though exceptions are pending. Without this patch there is a window of time when exceptions such as NMI are enabled but no exception handlers are installed. This patch modifies both the zImage loader and the actual kernel to boot with BL=1, but the zImage loader is modfied in such a way that the init_sr value is unchanged to not break the zImage loader provided by kexec. Tested on sh7724 Ecovec and on the SH4AL-DSP core included in sh7372. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-30sh: fix a kfree address in clkdev codeGuennadi Liakhovetski1-1/+3
kfree() in clkdev_drop() function should actually be called with an address of a struct clk_lookup_alloc object, and not struct clk_lookup, as presently done. This just happens to work, because "struct clk_lookup cl" is the first member in struct clk_lookup_alloc. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-24sh: provide generic arch_debugfs_dir.Paul Mundt8-40/+24
While sh previously had its own debugfs root, there now exists a common arch_debugfs_dir prototype, so we switch everything over to that. Presumably once more architectures start making use of this we'll be able to just kill off the stub kdebugfs wrapper. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-23sh: change to new flag variablematt mooney4-4/+4
Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20sh: pci: Use a generic raw spinlock for PCI config access locking.Paul Mundt4-12/+17
This copies the pci_config_lock idea from x86 over, allowing us to kill off a couple of existing private locks. At the same time, these need to be converted to raw spinlocks for -rt kernels, so we make that change at the same time. This should make it easier for future parts to get the locking right instead of inevitable ending up with lock type mismatches. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20sh: pci: clock framework support for SH7786 PCIe.Paul Mundt1-21/+86
This gets each port handling its MSTP bit, as well as moving the PHY clock management in to the clock framework. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20sh: pci: Use I/O accessors consistently in SH7786 PCIe init code.Paul Mundt2-17/+25
Some of the existing code is flipping between __raw_xxx() and pci_{read,write}_reg(). As the latter are just wrappers for the former, flip over to using them consistently. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20sh: pci: Support ports with disabled links on SH7786 PCIe.Paul Mundt1-5/+12
Presently we error out if a link is disabled and simply drop the port registration outright. This follows the PPC changes and simply reports on the link state on boot, leaving the port registered, in order to more easily deal with hotplug on future parts. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20sh: pci: Discard initial PCICONF4/5 settings for SH7786 PCIe.Paul Mundt1-3/+0
These settings are properly propagated by the hardware already, so there's no need to bother with them manually. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20sh: pci: Support root complex config accesses on SH7786 PCIe.Paul Mundt2-9/+55
The SH7786 PCIe is presently unable to enumerate itself in root complex mode, and has no visibility through either type 0 or type 1 accesses, despite having a mostly sensible extended config space for each port. Attempts to generate type 0 or type 1 config cycles result in completer aborts, so we're ultimately forced to use SuperHyway transactions instead. As each port has a single port <-> device mapping that resolves for any PCI_SLOT definition, we simply hijack devfn 0 for the SuperHyway transaction and bump up the devfn limit. With enumeration of the root complex now possible, we also need to insert an early fixup to hide the BARs from the kernel. With all of that done, it's now possible to use the pcieport services with all of the PCIe ports, which is the first step to power management support. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-20sh: pci: Move Renesas PCI IDs to a better place.Paul Mundt1-6/+0
Previously these IDs were only used by one driver, so there was not much need for having them generically defined. Now that this will no longer hold true, move them over. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-19sh: pci: Give SH7786 PHY some time to settle.Paul Mundt1-0/+3
The spec suggests waiting up to 500ms for the PHY to settle before testing link state, but practice shows that 100ms is sufficient (this is the delay value we also use on the other SH-4A PCI controllers, too). This makes device detection much more reliable, although in the future it should be a bit faster to simply serialize with a TLP IRQ. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-19sh: pci: Toggle configuration accesses on SH7786.Paul Mundt1-0/+3
After configuration accesses have been completed deassert the configuration access enable cleanly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-19sh: pci: Use generic pci_enable_resources() for pcibios_enable_device().Paul Mundt1-34/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-16sh: kill big kernel lockArnd Bergmann1-6/+3
The only BKL user in arch/sh protects a single bit, so we can trivially replace it with test_and_set_bit. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14Revert "sh: ecovec24: modify tsc2007 platform settings"Paul Mundt1-2/+24
According to Morimoto-san, this is no longer needed. Revert it. This reverts commit e0009b0a44f28227571d8cddebc5ccdae86027a6. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14sh: Provide a non-multiplexed sys_recvmmsg path.Paul Mundt2-20/+20
Now that the rest of the socket calls are provided through their own paths, do the same for sys_recvmmsg. It's unlikely we'll ever be able to kill off the socketcall path, but this at least permits userspace to gradually begin migrating. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14sh: Add syscall entries for non multiplexed socket callsCarmelo AMOROSO2-1/+38
Linux kernel already has socket syscalls that can be invoked without the multiplexing sys_socketcall wrapper. C library wrappers are ready to use them directly. It needs just to define the missing syscall numbers and provide the related entries into the syscalls table, like sh64 aleady does. Signed-off-by: Francesco Rundo <francesco.rundo@st.com> Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14sh: ecovec24: modify tsc2007 platform settingsKuninori Morimoto1-24/+2
This patch modify x_plate_ohms to correct value for tsc2007 panel, and removed un-necessary ts_get_pendown_state() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-14sh: Set CONFIG_SYSFS_DEPRECATED_V2=nMatt Fleming38-38/+0
As the help for the config option suggests, this option really shouldn't be set by default for any recent distribution as it changes the layout of sysfs. I spotted this while running debian when udev got very confused by the sysfs layout and failed to create some device nodes. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07Merge branch 'sh/pci-express-integration'Paul Mundt2-11/+85
2010-09-07sh: Hook up 3rd memory window for all SH7786 PCIe channels.Paul Mundt1-0/+3
Now that the resource assignment issues are resolved, we can finally wire up the small third memory window -- in the future we may reclaim this for MSI. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07sh: Properly wire up channel 2's I/O window on SH7786 PCIe.Paul Mundt1-0/+1
An IORESOURCE_IO was missing here, which meant that we weren't properly establishing the I/O window for this particular slot. With this corrected, cards with I/O BARs have them actually assigned and accessible. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07sh: Ignore 32-bit windows in 29-bit mode for SH7786 PCIe.Paul Mundt1-8/+16
Certain memory windows are only available for 32-bit space, so skip over these in 29-bit mode. This will severely restrict the amount of memory that can be mapped, but since a boot loader bug makes booting in 29-bit mode close to impossible anyways, everything is ok. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07sh: Establish a SuperHyway<->PCIe window mapping on SH7786 PCIe.Paul Mundt1-1/+1
This bumps up the low address to match the physical memory windows for SHway<->PCIe transfers. The previous implementation was banking on a 1:1 virt<->phys SHway mapping, which doesn't apply here. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07sh: Make SH7786 PCIe port reset logic more aggressive.Paul Mundt1-1/+11
This attempts a more complete port reset, building on top of the existing approach. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-09-07sh: Additional register definitions for SH7786 PCIe.Matt Fleming1-2/+54
Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-20Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6Paul Mundt59-102/+217
Conflicts: arch/sh/kernel/process_32.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-20Merge branch 'sh/pci-express-integration'Paul Mundt2-21/+36
2010-08-20sh: sh2007/sh7757lcr defconfig reduction.Paul Mundt2-2185/+0
These were newly added while the defconfig reduction work was ongoing, strip them down now. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-20sh: Relax devfn constraints for SH7786 PCIe.Paul Mundt1-9/+4
SH7786 PCIe has 1 slot per port, but no specific restriction on function. Relax the devfn restriction and look to the slot number instead when configured as a root complex. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-20sh: Fix up SH7786 PCIe PHY initialization.Paul Mundt1-12/+18
This brings the clocking and register setting in line with the somewhat factually ambiguous specification. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-20sh: Support type 1 accesses for SH7786 PCI.Paul Mundt1-7/+21
This enables support for type 1 config space accesses on the SH7786 PCI controller. At the same time, add in some extra sanity checks for controller asserted errors. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-08-18Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds1-2/+0
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Fix build error: conflicting types for ‘sys_execve’
2010-08-18[IA64] Fix build error: conflicting types for ‘sys_execve’Tony Luck1-2/+0
arch/ia64/kernel/process.c:636: error: conflicting types for ‘sys_execve’ commit d7627467b7a8dd6944885290a03a07ceb28c10eb Make do_execve() take a const filename pointer Missed the declaration of sys_execve in the ia64 asm/unistd.h (perhaps because there is no reason for it to be there ... it might be a left over from the COMPAT code?). Just delete the conflicting version. Signed-off-by: Tony Luck <tony.luck@intel.com>
2010-08-18Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds2-7/+16
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: include sched.h in ColdFire/SPI driver m68knommu: formatting of pointers in printk() m68knommu: arch/m68k/include/asm/ide.h fix for nommu
2010-08-18Merge branch 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds3-3/+5
* 'merge-devicetree' of git://git.secretlab.ca/git/linux-2.6: spi.h: missing kernel-doc notation, please fix of: fix missing headers for of_address_to_resource() in MTD and SysACE drivers of: Fix missing includes ata: update for of_device to platform_device replacement microblaze: Fix of: eliminate of_device->node and dev_archdata->{of,prom}_node microblaze: Fix of/address: Merge all of the bus translation code booting-without-of: Remove nonexistent chapters from TOC, fix numbering
2010-08-18m68knommu: formatting of pointers in printk()Kulikov Vasiliy1-5/+5
arch/m68knommu/kernel/process.c: formatting of pointers in printk() Use %p instead of %08x in printk(). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-18m68knommu: arch/m68k/include/asm/ide.h fix for nommuJate Sujjavanich1-2/+11
The arch/m68k/include/asm/ide.h produces errors when the IDE driver is compiled for my 523x uClinux system under kernel. The header makes some redefines of operators not defined in the arch/m68k/include/asm/io_no.h header. There are no separate mmio and iospace defines. Signed-off-by: Jate Sujjavanich <jsujjavanich@syntech-fuelmaster.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2010-08-17Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdbLinus Torvalds1-1/+1
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: vt,console,kdb: preserve console_blanked while in kdb vt: fix regression warnings from KMS merge arm,kgdb: fix GDB_MAX_REGS no longer used kgdb: add missing __percpu markup in arch/x86/kernel/kgdb.c kdb: fix compile error without CONFIG_KALLSYMS
2010-08-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds7-8/+27
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix atomic64_t routine return values. sparc64: Fix rwsem constant bug leading to hangs. sparc: Hook up new fanotify and prlimit64 syscalls. sparc: Really fix "console=" for serial consoles.
2010-08-17Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds5-5/+19
* master.kernel.org:/home/rmk/linux-2.6-arm: VIDEO: amba clcd: don't disable an already disabled clock ARM: Tighten check for allowable CPSR values ARM: 6329/1: wire up sys_accept4() on ARM ARM: 6328/1: Build with -fno-dwarf2-cfi-asm ARM: 6326/1: kgdb: fix GDB_MAX_REGS no longer used
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.