aboutsummaryrefslogtreecommitdiffstats
path: root/arch (follow)
AgeCommit message (Collapse)AuthorFilesLines
2010-08-12parisc: fix wrong page aligned size calculation in ioremapping codeFlorian Zumbiehl1-1/+1
parisc __ioremap(): fix off-by-one error in page alignment of allocation size for sizes where size%PAGE_SIZE==1. Signed-off-by: Florian Zumbiehl <florz@florz.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Helge Deller <deller@gmx.de> Tested-by: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12score: fix dereference of NULL pointer in local_flush_tlb_page()Roel Kluin1-1/+1
Don't dereference vma if it's NULL. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6Linus Torvalds1-7/+8
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: isofs: Fix lseek() to position beyond 4 GB vfs: remove unused MNT_STRICTATIME vfs: show unreachable paths in getcwd and proc vfs: only add " (deleted)" where necessary vfs: add prepend_path() helper vfs: __d_path: dont prepend the name of the root dentry ia64: perfmon: add d_dname method vfs: add helpers to get root and pwd cachefiles: use path_get instead of lone dget fs/sysv/super.c: add support for non-PDP11 v7 filesystems V7: Adjust sanity checks for some volumes Add v7 alias v9fs: fixup for inode_setattr being removed Manual merge to take Al's version of the fs/sysv/super.c file: it merged cleanly, but Al had removed an unnecessary header include, so his side was better.
2010-08-11Merge branch 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6Linus Torvalds6-3/+334
* 'ixp4xx' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6: IXP4xx: Fix LL debugging on little-endian CPU. IXP4xx: Fix sparse warnings in I/O primitives. IXP4xx: Make mdio_bus struct static in the Ethernet driver. IXP4xx: Fix ixp4xx_crypto little-endian operation. IXP4xx: Prevent HSS transmitter lockup by disabling FRaMe signals. ixp4xx/vulcan: add PCI support ixp4xx: base support for Arcom Vulcan
2010-08-11Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds272-4636/+13492
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (226 commits) ARM: 6323/1: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions} ARM: 6324/1: cam60: move cam60_spi_devices to .init.data ARM: 6322/1: imx/pca100: Fix name of spi platform data ARM: 6321/1: fix syntax error in main Kconfig file ARM: 6297/1: move U300 timer to dynamic clock lookup ARM: 6296/1: clock U300 intcon and timer properly ARM: 6295/1: fix U300 apb_pclk split ARM: 6306/1: fix inverted MMC card detect in U300 ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID ARM: 6294/1: etm: do a dummy read from OSSRR during initialization ARM: 6292/1: coresight: add ETM management registers ARM: 6288/1: ftrace: document mcount formats ARM: 6287/1: ftrace: clean up mcount assembly indentation ARM: 6286/1: fix Thumb-2 decompressor broken by "Auto calculate ZRELADDR" ARM: 6281/1: video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE ARM: 6280/1: imx: Fix build failure when including <mach/gpio.h> without <linux/spinlock.h> ARM: S5PV210: Fix on missing s3c-sdhci card detection method for hsmmc3 ARM: S5P: Fix on missing S5P_DEV_FIMC in plat-s5p/Kconfig ARM: S5PV210: Override FIMC driver name on Aquila board ARM: S5PC100: enable FIMC on SMDKC100 ... Fix up conflicts in arch/arm/mach-{s5pc100,s5pv210}/cpu.c due to different subsystem 'setname' calls, and trivial port types in include/linux/serial_core.h
2010-08-11panic: keep blinking in spite of long spin timer modeTAMUKI Shoichi1-12/+5
To keep panic_timeout accuracy when running under a hypervisor, the current implementation only spins on long time (1 second) calls to mdelay. That brings a good effect, but the problem is the keyboard LEDs don't blink at all on that situation. This patch changes to call to panic_blink_enter() between every mdelay and keeps blinking in spite of long spin timer mode. The time to call to mdelay is now 100ms. Even this change will keep panic_timeout accuracy enough when running under a hypervisor. Signed-off-by: TAMUKI Shoichi <tamuki@linet.gr.jp> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11dma-mapping: remove dma_is_consistent APIFUJITA Tomonori20-59/+0
Architectures implement dma_is_consistent() in different ways (some misinterpret the definition of API in DMA-API.txt). So it hasn't been so useful for drivers. We have only one user of the API in tree. Unlikely out-of-tree drivers use the API. Even if we fix dma_is_consistent() in some architectures, it doesn't look useful at all. It was invented long ago for some old systems that can't allocate coherent memory at all. It's better to export only APIs that are definitely necessary for drivers. Let's remove this API. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11dma-mapping: parisc: set ARCH_DMA_MINALIGNFUJITA Tomonori1-0/+2
Architectures that handle DMA-non-coherent memory need to set ARCH_DMA_MINALIGN to make sure that kmalloc'ed buffer is DMA-safe: the buffer doesn't share a cache with the others. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11dma-mapping: unify dma_get_cache_alignment implementationsFUJITA Tomonori19-114/+0
dma_get_cache_alignment returns the minimum DMA alignment. Architectures defines it as ARCH_DMA_MINALIGN (formally ARCH_KMALLOC_MINALIGN). So we can unify dma_get_cache_alignment implementations. Note that some architectures implement dma_get_cache_alignment wrongly. dma_get_cache_alignment() should return the minimum DMA alignment. So fully-coherent architectures should return 1. This patch also fixes this issue. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11dma-mapping: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGNFUJITA Tomonori13-14/+14
Now each architecture has the own dma_get_cache_alignment implementation. dma_get_cache_alignment returns the minimum DMA alignment. Architectures define it as ARCH_KMALLOC_MINALIGN (it's used to make sure that malloc'ed buffer is DMA-safe; the buffer doesn't share a cache with the others). So we can unify dma_get_cache_alignment implementations. This patch: dma_get_cache_alignment() needs to know if an architecture defines ARCH_KMALLOC_MINALIGN or not (needs to know if architecture has DMA alignment restriction). However, slab.h define ARCH_KMALLOC_MINALIGN if architectures doesn't define it. Let's rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN. ARCH_KMALLOC_MINALIGN is used only in the internals of slab/slob/slub (except for crypto). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11arm: samsung: remove pixclock from several boardsMaurus Cuelenaere7-10/+3
Since "s3c-fb: Automatically calculate pixel clock when none is given", there's no need for manually calculating the pixel clock anymore so remove these lines and add the correct refresh rate where appropriately. Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com> Cc: Pawel Osciak <p.osciak@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: add support for DMA channel control on S5PV210Pawel Osciak1-0/+4
S5PV210 SoCs allow enabling/disabling DMA channels per window. For a window to display data from framebuffer memory, its channel has to be enabled. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: add SHADOWCON shadow register locking support for S5PV210Pawel Osciak1-0/+3
S5PV210 allows per-window locking of register value updates from shadow registers. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: add wait for VSYNC ioctlPawel Osciak1-0/+1
Add VSYNC interrupt support and an ioctl that allows waiting for it. Interrupts are turned on only when needed. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: add support for display panningPawel Osciak1-0/+7
Supports all bpp modes. The PRTCON register is used to disable in-hardware updates of registers that store start and end addresses of framebuffer memory. This prevents display corruption in case we do not make it before VSYNC with updating them atomically. With this feature there is no need to wait for a VSYNC interrupt before each such update. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: add device name initializationPawel Osciak5-1/+38
Add framebuffer device name initialization calls for S3C2443, S3C64xx and S5P machines. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: correct FRAMESEL1 bitfield defines for VIDINTCON0 registerPawel Osciak1-5/+5
FRAMESEL1 bitfield starts on 13th bit, not on 14th. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Cc: InKi Dae <inki.dae@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: integrate palette setup code into main driverBen Dooks1-34/+0
Remove the palette setup code from the header files and put it into the main driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: KyungMin Park <kyungmin.park.samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: udpate to support s3c2416/s3c2443 style hardwareBen Dooks2-7/+5
Update the variant and window variant structures with the necessary changes to support the older style of hardware where these are not in the same place. Add the support for the s3c2443/s3c2416 hardware by using the platform-device s3c2443 to cover both, and add the initialisation data for these. Also change to including just the v4 header files for the moment until the last of the merging of these is sorted out. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: KyungMin Park <kyungmin.park.samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: initial move to unifying the header filesBen Dooks3-90/+0
Remove the various header files that configure this driver and use the platform device name to select the correct configuration at probe time. Currently this does not remove the header files, only updates the driver and the relevant platform files. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Cc: InKi Dae <inki.dae@samsung.com> Cc: KyungMin Park <kyungmin.park.samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: fix distortedness situation for the mode more then 24bppInKi Dae1-0/+1
It has been working fine at 16bpp but in case of pixel format more then 24bpp it would occur distortedness situation on that mode. so this patch set the word swap control bit of WINCONx to 1 as default value. but it should be set to 0 in case that each ENLOCAL bit of WINCON0 ~ 2 registers is enabled. this issue would be solved with local path feature soon. Signed-off-by: InKi Dae <inki.dae@samsung.com> Reviewed-by: KyungMin Park <kyungmin.park.samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11s3c-fb: add default window feature.InKi Dae1-0/+3
s5pv210 has five window layers (window0 ~ 4), among them, window0 ~ 2 could be used for local path with fimc(capture device) and fimd writeback feature so this patch makes default window layer for UI to be set at machine code. Signed-off-by: InKi Dae <inki.dae@samsung.com> Reviewed-by: KyungMin Park <kyungmin.park.samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11dts: add ESDHC weird voltage bits workaroundRoy Zang1-0/+1
P4080 ESDHC controller does not support 1.8V and 3.0V voltage. but the host controller capabilities register wrongly set the bits. This patch adds the workaround to correct the weird voltage setting bits. Only 3.3V voltage is supported for P4080 ESDHC controller. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Cc: Jerry Huang <Chang-Ming.Huang@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11dts: add sdhci,auto-cmd12 field for p4080 device treeRoy Zang1-0/+1
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Cc: Jerry Huang <Chang-Ming.Huang@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11omap: pandora: pass wl1251 information to SDIO coreGrazvydas Ignotas3-0/+21
Pandora has TI WL1251 attached on MMC3, which is non-standard SDIO chip. Make use MMC_QUIRK_NONSTD_SDIO to tell SDIO core about it. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Kalle Valo <kvalo@adurom.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11omap_hsmmc: add init_card pass-through callbackGrazvydas Ignotas1-0/+2
This will allow us to set up special cards in machine drivers just after they are detected by MMC core. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Kalle Valo <kvalo@adurom.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11ia64: perfmon: add d_dname methodMiklos Szeredi1-7/+8
Switch ia64/perfmon to using the d_dname() instead of relying on __d_path() to prepend the name of the root dentry to the path. CC: Tony Luck <tony.luck@intel.com> CC: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-10x86: fix up system call numbering nitLinus Torvalds2-2/+2
As pointed out by Jiri Slaby: when I resolved the the 32-bit x85 system call entry tables for prlimit (due to the conflict with fanotify), I forgot to add the numbering in comments that we do for every fifth entry. Reported-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds21-47/+6
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits) block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n xen-blkfront: fix missing out label blkdev: fix blkdev_issue_zeroout return value block: update request stacking methods to support discards block: fix missing export of blk_types.h writeback: fix bad _bh spinlock nesting drbd: revert "delay probes", feature is being re-implemented differently drbd: Initialize all members of sync_conf to their defaults [Bugz 315] drbd: Disable delay probes for the upcomming release writeback: cleanup bdi_register writeback: add new tracepoints writeback: remove unnecessary init_timer call writeback: optimize periodic bdi thread wakeups writeback: prevent unnecessary bdi threads wakeups writeback: move bdi threads exiting logic to the forker thread writeback: restructure bdi forker loop a little writeback: move last_active to bdi writeback: do not remove bdi from bdi_list writeback: simplify bdi code a little writeback: do not lose wake-ups in bdi threads ... Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and drivers/scsi/scsi_error.c as per Jens.
2010-08-10Merge branches 'master' and 'devel' into for-linusRussell King259-4478/+13286
Conflicts: arch/arm/Kconfig arch/arm/mm/Kconfig
2010-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds8-10/+12
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (148 commits) USB: serial: fix stalled writes USB: remove fake "address-of" expressions USB: fix thread-unsafe anchor utiliy routines USB: usbtest: support test device with only one iso-in or iso-out endpoint USB: usbtest: avoid to free coherent buffer in atomic context USB: xhci: Set DMA mask for host. USB: xhci: Don't flush doorbell writes. USB: xhci: Reduce reads and writes of interrupter registers. USB: xhci: Make xhci_set_hc_event_deq() static. USB: xhci: Minimize HW event ring dequeue pointer writes. USB: xhci: Make xhci_handle_event() static. USB: xhci: Remove unnecessary reads of IRQ_PENDING register. USB: xhci: Performance - move xhci_work() into xhci_irq() USB: xhci: Performance - move interrupt handlers into xhci-ring.c USB: xhci: Performance - move functions that find ep ring. USB:: fix linux/usb.h kernel-doc warnings USB: add USB serial ssu100 driver USB: usb-storage: implement autosuspend USB: ehci: fix remove of ehci debugfs dir USB: Add USB 2.0 to ssb ohci driver ...
2010-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds32-17/+49
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (68 commits) U6715 16550A serial driver support Char: nozomi, set tty->driver_data appropriately Char: nozomi, fix tty->count counting serial: max3107: Fix gpiolib support hsu: call PCI pm hooks in suspend/resume function hsu: some code cleanup hsu: add a periodic timer to check dma rx channel hsu: driver for Medfield High Speed UART device mxser: remove unnesesary NULL check serial: add support for OX16PCI958 card serial: 68328serial.c: remove dead (ALMA_ANS | DRAGONIXVZ | M68EZ328ADS) timbuart: use __devinit and __devexit macros for probe and remove serial: MMIO32 support for 8250_early.c serial: mcf: don't take spinlocks in already protected functions serial: general fixes in the serial_rs485 structure serial: fix missing bit coverage of ASYNC_FLAGS serial: "altera_uart: simplify altera_uart_console_putc()" checkpatch fixes serial: crisv10: formatting of pointers in printk() vt: Fix warning: statement with no effect due to vt_kern.h tty_io: remove casts from void* ...
2010-08-10ARM: 6323/1: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions}Uwe Kleine-König1-2/+2
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 12/19] ARM: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions} Date: Thu, 5 Aug 2010 16:08:46 +0200 Message-Id: <1281017333-5563-12-git-send-email-u.kleine-koenig@pengutronix.de> These two structs are referenced by cam60_spi_devices. The latter is copied at init time to kmalloced memory and so the copy isn't freed after booting. So it must not contain references to .init memory. This isn't noticed by modpost as cam60_spi_devices is in .init.data, too. Noticed-and-Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10ARM: 6324/1: cam60: move cam60_spi_devices to .init.dataUwe Kleine-König1-2/+2
cam60_spi_devices is passed to at91_add_device_spi which calls spi_register_board_info. The latter makes a copy of it, so living in .init.data is OK. This fixes the following warning in cam60_defconfig: WARNING: vmlinux.o(.data+0x2a00): Section mismatch in reference from the variable cam60_spi_devices to the (unknown reference) .init.data:(unknown) The variable cam60_spi_devices references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10USB: s3c-hsotg: Add initial detection and setup for dedicated FIFO modeBen Dooks1-0/+2
Add support for the dedicated FIFO mode on newer SoCs such as the S5PV210 partly to improve support and to fix the bug where any non-EP0 IN endpoint requires its own FIFO allocation. To fix this, we ensure that any non-zero IN endpoint is given a TXFIFO using the same allocation method as the periodic case (all our current hardware has enough FIFOs and FIFO memory for a 1:1 mapping) and ensure that the necessary transmission done interrupt is enabled. The default settings from reset for the core point all EPs at FIFO0, used for the control endpoint. However, the controller documentation states that all IN endpoints _must_ have a unique FIFO to avoid any contention during transmission. Note, this leaves us with a large IN FIFO for EP0 (which re-uses the old NPTXFIFO) for an endpoint which cannot shift more than a pair of packets at a time... this is a waste, but it looks like we cannot re-allocate space to the individual IN FIFOs as they are already maxed out (to be confirmed). Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: otg/ulpi: extend the generic ulpi driver.Igor Grinberg7-10/+10
1) Introduce ulpi specific flags for control of the ulpi phy 2) Extend the generic ulpi driver with support for Function and Interface control of upli phy 3) Update the platforms using the generic ulpi driver with new ulpi flags 4) Remove the otg control flags not in use Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds3-5/+14
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: zorro: Fix reading of proc/bus/zorro/* in small chunks zorro: BKL removal m68k/mac: Fix RTC on PMU machines m68k/mac: Add color classic ii support arch/m68k/sun3/leds.c: Checkpatch cleanup
2010-08-10ARM: 6322/1: imx/pca100: Fix name of spi platform dataUwe Kleine-König1-1/+1
Commit 7536cf9 (ARM: imx: dynamically register spi_imx devices (imx27)) introduced a variable named "pca100_spi0_data" but passed "&pca100_spi_0_data" to imx27_add_spi_imx0. This wasn't noticed earlier because both SPI_IMX and MACH_PCA100 are not enabled in mx27_defconfig. This fixes a build failure: arch/arm/mach-imx/mach-pca100.c: In function 'pca100_init': arch/arm/mach-imx/mach-pca100.c:411: error: 'pca100_spi_0_data' undeclared (first use in this function) arch/arm/mach-imx/mach-pca100.c:411: error: (Each undeclared identifier is reported only once arch/arm/mach-imx/mach-pca100.c:411: error: for each function it appears in.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10ARM: 6321/1: fix syntax error in main Kconfig fileUwe Kleine-König1-1/+1
This fixes: scripts/kconfig/mconf arch/arm/Kconfig arch/arm/Kconfig:1187: invalid option make[1]: *** [menuconfig] Error 1 make: *** [menuconfig] Error 2 which was introduced by 1cea732 ([ARM] tegra: SMP support) Cc: Tanmay Upadhyay <tanmay.upadhyay@einfochips.com> Cc: xsecute@googlemail.com Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Colin Cross <ccross@android.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10ARM: 6297/1: move U300 timer to dynamic clock lookupLinus Walleij2-10/+13
This moves the U300 timer code to look up its clock rate from the clock framework as is apropriate and also switches it over to use the generic code for *calc_mult_shift() on clock source and clock event. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10ARM: 6296/1: clock U300 intcon and timer properlyLinus Walleij4-24/+17
This removes the quirks to clock the U300 VIC and timer by custom hooks and moves the control out to the clock framework where it belongs. This is possible now that clocks are available early. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10ARM: 6295/1: fix U300 apb_pclk splitLinus Walleij3-67/+57
This fixes a regression due to the new apb_pclk stuff in the U300 platform, makes it run by splitting the apb clock off the single UART clocks. For the MMCI and PL022 clocks we don't split them: these are actually hardwired to the same clock terminal and will thus simply have a double reference count and will be referenced twice. We also move clock registration to .init_irq() so they are available early enough for probing to be successful and remove the earlier quirk to clock primecells during PrimeCell registration. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10ARM: 6306/1: fix inverted MMC card detect in U300Linus Walleij1-4/+4
This converts the U300 to uninverted logic for MMCI card detect, fixing a regression in the current tree. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASIDWill Deacon2-0/+20
On versions of the Cortex-A9 prior to r2p0, performing TLB invalidations by ASID match can result in the incorrect ASID being broadcast to other CPUs. As a consequence of this, the targetted TLB entries are not invalidated across the system. This workaround changes the TLB flushing routines to invalidate entries regardless of the ASID. Cc: <stable@kernel.org> Tested-by: Rob Clark <rob@ti.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10ARM: 6294/1: etm: do a dummy read from OSSRR during initializationAlexander Shishkin1-1/+3
The first read from ETM OS save and restore register after the power down bit deassertion returns garbage. Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10ARM: 6292/1: coresight: add ETM management registersAlexander Shishkin2-3/+7
Add notion of ETM OS lock, save and restore registers. Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10ARM: 6288/1: ftrace: document mcount formatsRabin Vincent1-0/+36
Add a comment describing the mcount variants and how the callsites look like. Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10ARM: 6287/1: ftrace: clean up mcount assembly indentationRabin Vincent1-44/+44
The mcount implementation currently uses a different indentation style from the rest of the file (and the rest of the ARM assembly in the kernel). Clean it up. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10ARM: 6286/1: fix Thumb-2 decompressor broken by "Auto calculate ZRELADDR"Rabin Vincent1-3/+2
"ARM: Auto calculate ZRELADDR and provide option for exceptions" broke the Thumb-2 decompressor because it removed an entry in the LC0 table but didn't adjust the offset the Thumb-2 code uses to load the SP from that table. Fix it, and also change the ARM code to use the separate SP-load since ARM instructions that include the SP in the LDM register list are deprecated. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-10ARM: 6280/1: imx: Fix build failure when including <mach/gpio.h> without <linux/spinlock.h>Uwe Kleine-König1-0/+1
This is a follow up to 14cb0de (arm/imx/gpio: add spinlock protection) and fixes the following build failure: CC arch/arm/mach-imx/pcm970-baseboard.o In file included from arch/arm/include/asm/gpio.h:6, from include/linux/gpio.h:8, from arch/arm/mach-imx/pcm970-baseboard.c:20: arch/arm/plat-mxc/include/mach/gpio.h:40: error: expected specifier-qualifier-list before 'spinlock_t' Cc: stable@kernel.org Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.