aboutsummaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-12-16arm64: dts: lx2160a-rdb: Add Inphi PHY nodeIoana Radulescu1-0/+17
DPMAC5 and DPMAC6 are connected to 25G Inphi PHY Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@nxp.com> Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com> Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: lx2160a: fix scl-gpios property nameZhang Ying-224551-2/+2
Fix the typo in the property name. Fixes: d548c217c6a3c ("arm64: dts: add QorIQ LX2160A SoC support") Signed-off-by: Zhang Ying <ying.zhang22455@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: imx8mm: don't assign PLL2 in SoC dtsiLucas Stach1-4/+2
The base i.MX8MM dtsi changes the audio PLL2 rate, which gets in the way if it should be used for anything else than audio. As this PLL doesn't seem to be used by any upstream supported board, just remove the rate configuration to allow boards to set it up as they wish. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: allwinner: h6: Add Hantro G2 nodeJernej Skrabec1-0/+9
H6 SoC has a second VPU, dedicated to VP9 decoding. It's a slightly older design, though. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211129182633.480021-10-jernej.skrabec@gmail.com
2021-12-16ARM: imx_v6_v7_defconfig: Enable for DHCOM devices required RTC_DRV_RV3029C2Johann Neuhauser1-0/+1
All imx6 DHCOM devices uses a on module gold cap/battery powered i2c rtc "microcrystal,rv3029", which isn't enabled in the imx_v6_v7_defconfig. The rtc for all imx6 DHCOM devices is defined in: imx6qdl-dhcom-som.dtsi To have a working clock on all imx6qdl DHCOM based devices, enable the driver. Signed-off-by: Johann Neuhauser <jneuhauser@dh-electronics.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: nitrogen8-som: correct i2c1 pad-ctrlLucas Stach1-2/+2
The slew rate and drive-strength of the i2c1 pads were much too high. Bring them down to avoid signal quality issues. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16ARM: dts: imx6qdl-wandboard: Fix Ethernet supportMartin Haaß1-0/+1
Currently, the imx6q-wandboard Ethernet does not transmit any data. This issue has been exposed by commit f5d9aa79dfdf ("ARM: imx6q: remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs"). Fix it by describing the qca,clk-out-frequency property as suggested by the commit above. Fixes: 77591e42458d ("ARM: dts: imx6qdl-wandboard: add ethernet PHY description") Signed-off-by: Martin Haaß <vvvrrooomm@gmail.com> Tested-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16arm64: dts: nitrogen8-som: correct network PHY resetLucas Stach1-4/+7
Add the missing reset-gpios property to allow Linux to fully reset the network PHY and fix the pinmux to add the neccessary pull-ups for the PHY strap configuration. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16ARM: dts: imx7d-remarkable2: add wacom digitizer deviceAlistair Francis1-0/+59
Add Wacom I2C support for the reMarkable 2 eInk tablet using the generic I2C HID framework. Signed-off-by: Alistair Francis <alistair@alistair23.me> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-16ARM: dts: imx6ulz-bsh-smm-m2: Add BSH SMM-M2 IMX6ULZ SystemMasterMichael Trimarchi2-1/+148
Add DTS of BSH SMM-M2 SystemMaster. This version comes with: - 128 MiB DDR3 RAM - 256 MiB Nand - wifi - bluetooth Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-12-15ARM: dts: qcom: Drop input-name propertyDang Huynh7-7/+0
This property doesn't seem to exist in the documentation nor in source code, but for some reason it is defined in a bunch of device trees. Signed-off-by: Dang Huynh <danct12@riseup.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211123161919.1506755-1-danct12@riseup.net
2021-12-15arm64: dts: qcom: sm8450: add i2c13 and i2c14 device nodesDmitry Baryshkov1-0/+52
Add device tree nodes for two i2c blocks: i2c13 and i2c14. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211215043440.605624-12-vkoul@kernel.org
2021-12-15arm64: dts: qcom: sm8450: add cpufreq supportVladimir Zapolskiy1-0/+23
The change adds a description of a SM8450 cpufreq-epss controller and references to it from CPU nodes. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211215043440.605624-11-vkoul@kernel.org
2021-12-15arm64: dts: qcom: sm8450: Add rpmhpd nodeDmitry Baryshkov1-0/+51
This adds RPMH power domain found in SM8450 SoC Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211215043440.605624-10-vkoul@kernel.org
2021-12-15arm64: dts: qcom: sm8450-qrd: enable ufs nodesVinod Koul1-0/+20
Enable the UFS and phy node and add the regulators used by them. Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211215043440.605624-9-vkoul@kernel.org
2021-12-15arm64: dts: qcom: sm8450: add ufs nodesVinod Koul1-0/+72
Add the UFS and QMP PHY node for SM8450 SoC Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211215043440.605624-8-vkoul@kernel.org
2021-12-15arm64: dts: qcom: sm8450-qrd: Add rpmh regulator nodesVinod Koul1-0/+322
Add the RPMH regulators found in QRD-SM8450 platform Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211215043440.605624-7-vkoul@kernel.org
2021-12-15arm64: dts: qcom: Add base SM8450 QRD DTSVinod Koul2-0/+34
Add DTS for Qualcomm QRD platform which uses SM8450 SoC and mark the reserved nodes. Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211215043440.605624-6-vkoul@kernel.org
2021-12-15arm64: dts: qcom: sm8450: add smmu nodesVinod Koul1-0/+103
Add the apps smmu node as found in the SM8450 SoC Signed-off-by: Vinod Koul <vkoul@kernel.org> Acked-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211215043440.605624-5-vkoul@kernel.org
2021-12-15arm64: dts: qcom: sm8450: Add reserved memory nodesVinod Koul1-0/+221
Add the reserved memory nodes for SM8450. This is based on the downstream documentation. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211215043440.605624-4-vkoul@kernel.org
2021-12-15arm64: dts: qcom: sm8450: Add tlmm nodesVinod Koul1-0/+28
Add tlmm node found in SM8450 SoC and uart pin configuration Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211215043440.605624-3-vkoul@kernel.org
2021-12-15arm64: dts: qcom: Add base SM8450 DTSIVinod Koul1-0/+476
This add based DTSI for SM8450 SoC and includes base description of CPUs, GCC, RPMHCC, UART, interuupt-controller which helps to boot to shell with console on boards with this SoC Signed-off-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211215043440.605624-2-vkoul@kernel.org
2021-12-15arm64: dts: qcom: ipq6018: Fix gpio-ranges propertyBaruch Siach1-1/+1
There must be three parameters in gpio-ranges property. Fixes this not very helpful error message: OF: /soc/pinctrl@1000000: (null) = 3 found 3 Fixes: 1e8277854b49 ("arm64: dts: Add ipq6018 SoC and CP01 board support") Cc: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/8a744cfd96aff5754bfdcf7298d208ddca5b319a.1638862030.git.baruch@tkos.co.il
2021-12-15arm64: dts: qcom: sdm845: add QFPROM chipset specific compatibleDavid Heidelberg1-1/+1
Use correct compatible according to dt-binding. Fixes + few other lines of `make qcom/sdm845-oneplus-fajita.dtb`: arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: qfprom@784000: compatible: ['qcom,qfprom'] is too short From schema: Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211213190228.106924-1-david@ixit.cz
2021-12-15arm64: dts: qcom: sdm845: mtp: Add vadc channels and thermal zonesBjorn Andersson1-0/+140
Downstream defines four ADC channels related to thermal sensors external to the PM8998 and two channels for internal voltage measurements. Add these to the upstream SDM845 MTP, describe the thermal monitor channels and add thermal_zones for these. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20211005032531.2251928-5-bjorn.andersson@linaro.org
2021-12-15arm64: dts: qcom: pm8998: Add ADC Thermal Monitor nodeBjorn Andersson1-0/+10
Add a node for the ADC Thermal Monitor found in the PM8998 PMIC. This is used to connect thermal zones with ADC channels. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20211005032531.2251928-4-bjorn.andersson@linaro.org
2021-12-15arm64: qcom: dts: drop legacy property #stream-id-cellsDavid Heidelberg8-8/+0
Property #stream-id-cells is legacy leftover and isn't currently documented nor used. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211208184707.100716-1-david@ixit.cz
2021-12-15Revert "arm64: dts: qcom: sm8350: Specify clock-frequency for arch timer"Konrad Dybcio1-1/+0
This reverts commit ed9500c1df59437856d43e657f185fb1eb5d817d. The clock-frequency property was meant to aid platforms with broken firmwares that don't set up the timer properly on their own. Don't include it where it is not the case. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211202004328.459899-1-konrad.dybcio@somainline.org
2021-12-15arm64: dts: qcom: c630: add headset jack and button detection supportSrinivas Kandagatla1-0/+3
Add MBHC support available in WCD934X codec. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211209175342.20386-3-srinivas.kandagatla@linaro.org
2021-12-15arm64: dts: qcom: c630: Fix soundcard setupSrinivas Kandagatla1-0/+27
Currently Soundcard has 1 rx device for headset and SoundWire Speaker Playback. This setup has issues, ex if we try to play on headset the audio stream is also sent to SoundWire Speakers and we will hear sound in both headsets and speakers. Make a separate device for Speakers and Headset so that the streams are different and handled properly. Fixes: 45021d35fcb2 ("arm64: dts: qcom: c630: Enable audio support") Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211209175342.20386-2-srinivas.kandagatla@linaro.org
2021-12-15arm64: dts: mediatek: add pinctrl support for mt7986bSam Shih3-0/+42
Add mt7986b pinctrl node Signed-off-by: Sam Shih <sam.shih@mediatek.com> Link: https://lore.kernel.org/r/20211122123552.8218-3-sam.shih@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-12-15arm64: dts: mediatek: add pinctrl support for mt7986aSam Shih2-0/+41
Add mt7986a pinctrl node, and update pinmux setting for mt7986a Signed-off-by: Sam Shih <sam.shih@mediatek.com> Link: https://lore.kernel.org/r/20211122123552.8218-2-sam.shih@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-12-15arm64: dts: mt8183: kukui: Add Type C nodePrashant Malani1-0/+14
Add a node describing the USB Type C connector, in order to utilize the Chromium OS USB Type-C driver that enumerates Type-C ports and connected cables/peripherals and makes them visible to userspace. Cc: Alexandru M Stan <amstan@chromium.org> Cc: Benson Leung <bleung@chromium.org> Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Alexandru M Stan <amstan@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Link: https://lore.kernel.org/r/20211209195112.366176-1-pmalani@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-12-15arm64: dts: mediatek: add basic mt7986 supportSam Shih3-0/+186
Add basic chip support for Mediatek mt7986, include basic uart nodes, rng node and watchdog node. Add cpu node, timer node, gic node, psci and reserved-memory node for ARM Trusted Firmware. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Link: https://lore.kernel.org/r/20211122123222.8016-3-sam.shih@mediatek.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-12-15Merge tag 's390-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds5-10/+43
Pull s390 fixes from Heiko Carstens: - Add missing handling of R_390_PLT32DBL relocation type in arch_kexec_apply_relocations_add(). Clang and the upcoming gcc 11.3 generate such relocation entries, which our relocation code silently ignores, and which finally will result in an endless loop within the purgatory code in case of kexec. - Add proper handling of errors and print error messages when applying relocations - Fix duplicate tracking of irq nesting level in entry code - Let recordmcount.pl also look for jgnop mnemonic. Starting with binutils 2.37 objdump emits a jgnop mnemonic instead of brcl, which breaks mcount location detection. This is only a problem if used with compilers older than gcc 9, since with gcc 9 and newer compilers recordmcount.pl is not used anymore. - Remove preempt_disable()/preempt_enable() pair in kprobe_ftrace_handler() which was done for all architectures except for s390. - Update defconfig * tag 's390-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: recordmcount.pl: look for jgnop instruction as well as bcrl on s390 s390/entry: fix duplicate tracking of irq nesting level s390: enable switchdev support in defconfig s390/kexec: handle R_390_PLT32DBL rela in arch_kexec_apply_relocations_add() s390/ftrace: remove preempt_disable()/preempt_enable() pair s390/kexec_file: fix error handling when applying relocations s390/kexec_file: print some more error messages
2021-12-15ARM: tegra: Enable video decoder on Tegra114Anton Bambura1-0/+37
Add Video Decoder Engine node to Tegra114 device-tree. Signed-off-by: Anton Bambura <jenneron@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-15ARM: tegra: nexus7: Use common LVDS display device-treeMaxim Schwalm1-51/+3
Make Nexus 7 device-tree to use common LVDS bridge description. This makes device-trees more consistent. [digetx@gmail.com: factored Nexus7 change into separate patch and wrote commit message] Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-15ARM: tegra: Add CPU thermal zones to Nyan device-treeDmitry Osipenko1-1/+48
CPU of Nyan Chromebooks is overheating badly because apparently hardware soctherm controller doesn't work well. Add CPU thermal zones to enable software thermal control over CPU and fix the overheat trouble. Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-15ARM: tegra: Enable CPU DFLL on NyanDmitry Osipenko1-1/+1
Enable CPU DFLL node on Nyan Chromebooks. DFLL was previously disabled due to Linux kernel CPUFreq driver which didn't support suspend-resume. That problem was fixed years ago, but DFLL was never re-enabled. Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-15ARM: tegra: Enable HDMI CEC on NyanDmitry Osipenko1-0/+4
Enable HDMI CEC on Nyan Chromebooks. It allows to control TV over HDMI. Suggested-by: Thomas Graichen <thomas.graichen@gmail.com> Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-15ARM: tegra: Add usb-role-switch property to USB OTG portsStefan Eichenberger4-1/+4
If an USB port is an OTG port, then we should add the usb-role-switch property. Otherwise XUSB setup fails and therefore padctl is unable to set up the ports. This leads to broken USB and PCIe ports. Add the usb-role-switch properties to Tegra124 device-trees to fix the problem. The error message shown without this patch is e.g: usb2-0: usb-role-switch not found for otg mode [digetx@gmail.com: improved commit message] Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-15ARM: tegra: Add device-tree for 1080p version of Nyan BigDmitry Osipenko2-0/+12
Add dedicated device-tree for 1080p version of Nyan Big in order to describe display panel properly. FHD panel doesn't support modes other than 1080p, hence it's wrong to use incompatible lower resolution panel in device-tree. Tested-by: Thomas Graichen <thomas.graichen@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-15ARM: tegra: Add device-tree for Pegatron ChagallSvyatoslav Ryhel2-1/+2861
Add device-tree for Pegatron Chagall, which is a NVIDIA Tegra30-based Android tablet. Link: https://wiki.postmarketos.org/wiki/Pegatron_Chagall_(pegatron-chagall) Co-developed-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com> Signed-off-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com> Co-developed-by: Ion Agorria <ion@agorria.com> Signed-off-by: Ion Agorria <ion@agorria.com> Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: cosmetic fixups] Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-15ARM: tegra: Add device-tree for ASUS Transformer Pad TF701TAnton Bambura3-2/+810
Add device-tree for Tegra114-based ASUS Transformer Pad TF701T (K00C) tablet. Link: https://wiki.postmarketos.org/wiki/ASUS_Transformer_Pad_(TF701T)_(asus-tf701t) Signed-off-by: Anton Bambura <jenneron@protonmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: cosmetic fixups] Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-15ARM: tegra: Add device-tree for ASUS Transformer Infinity TF700TSvyatoslav Ryhel2-0/+824
Add device-tree for ASUS Transformer Infinity TF700T, which is a NVIDIA Tegra30-based 2-in-1 detachable, originally running Android. Link: https://wiki.postmarketos.org/wiki/Asus_Transformer_Pad_Infinity_TF700T_(asus-tf700t) Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> Tested-by: Jasper Korten <jja2000@gmail.com> Co-developed-by: Ion Agorria <ion@agorria.com> Signed-off-by: Ion Agorria <ion@agorria.com> Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Co-developed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: cosmetic fixups] Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-15ARM: tegra: Add device-tree for ASUS Transformer Pad TF300TGSvyatoslav Ryhel2-0/+1088
Add device-tree for ASUS Transformer Pad TF300TG, which is a NVIDIA Tegra30-based 2-in-1 detachable, originally running Android. It's a variant of the TF300T that has a 3G modem. Link: https://wiki.postmarketos.org/wiki/ASUS_Transformer_Pad_(asus-tf300t) Co-developed-by: Ion Agorria <ion@agorria.com> Signed-off-by: Ion Agorria <ion@agorria.com> Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: cosmetic fixups] Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-15ARM: tegra: Add device-tree for ASUS Transformer Pad TF300TMichał Mirosław2-0/+1035
Add device-tree for ASUS Transformer Pad TF300T, which is a NVIDIA Tegra30-based 2-in-1 detachable, originally running Android. Link: https://wiki.postmarketos.org/wiki/ASUS_Transformer_Pad_(asus-tf300t) Tested-by: Ihor Didenko <tailormoon@rambler.ru> Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> Co-developed-by: Ion Agorria <ion@agorria.com> Signed-off-by: Ion Agorria <ion@agorria.com> Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Co-developed-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: cosmetic fixups] Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-15ARM: tegra: Add device-tree for ASUS Transformer Prime TF201Svyatoslav Ryhel2-0/+628
Add device-tree for ASUS Transformer Prime TF201, which is a NVIDIA Tegra30-based 2-in-1 detachable, orignally running Android. Link: https://wiki.postmarketos.org/wiki/ASUS_Transformer_Prime_(asus-tf201) Co-developed-by: Ion Agorria <ion@agorria.com> Signed-off-by: Ion Agorria <ion@agorria.com> Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: cosmetic fixups] Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-15ARM: tegra: Add common device-tree for LVDS display panels of Tegra30 ASUS tabletsMaxim Schwalm1-0/+61
All Tegra30 ASUS tablets have a similar design pattern in terms of hardware integration of LVDS display panels, like exactly the same GPIOs are used for power and reset, etc. Add a common device-tree for LVDS display panels of Tegra30 ASUS tablets to avoid replicating the boilerplate panel description. [digetx@gmail.com: factored out common part into separate patch and wrote commit message] Co-developed-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-12-15ARM: tegra: Add common device-tree base for Tegra30 ASUS TransformersSvyatoslav Ryhel1-0/+1787
Add common DTSI for Tegra30 ASUS Transformers. It will be used by multiple device-trees of ASUS devices. The common part initially was born out of the ASUS TF300T tablet's device-tree that was created by Michał Mirosław. It was heavily reworked and improved by Svyatoslav Ryhel, Maxim Schwalm, Ion Agorria et al. [digetx@gmail.com: factored out common part into separate patch and wrote commit message] Co-developed-by: Ion Agorria <ion@agorria.com> Signed-off-by: Ion Agorria <ion@agorria.com> Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com> Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Co-developed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [treding@nvidia.com: cosmetic fixups] Signed-off-by: Thierry Reding <treding@nvidia.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.