| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Like fork and clone the clone3 syscall needs a wrapper to save callee
saved registers, which is required by the OpenRISC ABI. This came up
after auditing code following a discussion with Rob Landley and Arnd
Bergmann [0].
Tested with the clone3 kselftests and there were no issues.
[0] https://lore.kernel.org/all/41206fc7-f8ce-98aa-3718-ba3e1431e320@landley.net/T/#m9c0cdb2703813b9df4da04cf6b30de1f1aa89944
Fixes: 07e83dfbe16c ("openrisc: Enable the clone3 syscall")
Cc: Rob Landley <rob@landley.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
This saves one instruction.
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
The saving of the r12 register was there for a compiler bug referring
to a port that was never upstreamed. It should be safe to use this
as the new compiler is what we use and the old deprecated.
Also, clean up some typos and references to old names in the switch
comments.
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
Pull s390 fixes from Heiko Carstens:
- Fix potential overlap of pseudo-MMIO addresses with MIO addresses
- Fix stack unwinder test case inline assembly compile error that
happens with LLVM's integrated assembler
- Update defconfigs
* tag 's390-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: update defconfigs
s390/pci: move pseudo-MMIO to prevent MIO overlap
s390/test_unwind: use raw opcode instead of invalid instruction
|
|
Pull arm64 fixes from Will Deacon:
"Three arm64 fixes for -rc4.
One of them is just a trivial documentation fix, whereas the other two
address a warning in the kexec code and a crash in ftrace on systems
implementing BTI.
The latter patch has a couple of ugly ifdefs which Mark plans to clean
up separately, but as-is the patch is straightforward for backporting
to stable kernels.
Summary:
- Add missing BTI landing instructions to the ftrace*_caller
trampolines
- Fix kexec() WARN when DEBUG_VIRTUAL is enabled
- Fix PAC documentation by removing stale references to compiler
flags"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ftrace: add missing BTIs
arm64: kexec: use __pa_symbol(empty_zero_page)
arm64: update PAC description for kernel
|
|
In the native case, PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is the
trampoline stack. But XEN pv doesn't use trampoline stack, so
PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is also the kernel stack.
In that case, source and destination stacks are identical, which means
that reusing swapgs_restore_regs_and_return_to_usermode() in XEN pv
would cause %rsp to move up to the top of the kernel stack and leave the
IRET frame below %rsp.
This is dangerous as it can be corrupted if #NMI / #MC hit as either of
these events occurring in the middle of the stack pushing would clobber
data on the (original) stack.
And, with XEN pv, swapgs_restore_regs_and_return_to_usermode() pushing
the IRET frame on to the original address is useless and error-prone
when there is any future attempt to modify the code.
[ bp: Massage commit message. ]
Fixes: 7f2590a110b8 ("x86/entry/64: Use a per-CPU trampoline stack for IDT entries")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lkml.kernel.org/r/20211126101209.8613-4-jiangshanlai@gmail.com
|
|
The commit
c75890700455 ("x86/entry/64: Remove unneeded kernel CR3 switching")
removed a CR3 write in the faulting path of load_gs_index().
But the path's FENCE_SWAPGS_USER_ENTRY has no fence operation if PTI is
enabled, see spectre_v1_select_mitigation().
Rather, it depended on the serializing CR3 write of SWITCH_TO_KERNEL_CR3
and since it got removed, add a FENCE_SWAPGS_KERNEL_ENTRY call to make
sure speculation is blocked.
[ bp: Massage commit message and comment. ]
Fixes: c75890700455 ("x86/entry/64: Remove unneeded kernel CR3 switching")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211126101209.8613-3-jiangshanlai@gmail.com
|
|
Commit
18ec54fdd6d18 ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations")
added FENCE_SWAPGS_{KERNEL|USER}_ENTRY for conditional SWAPGS. In
paranoid_entry(), it uses only FENCE_SWAPGS_KERNEL_ENTRY for both
branches. This is because the fence is required for both cases since the
CR3 write is conditional even when PTI is enabled.
But
96b2371413e8f ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")
changed the order of SWAPGS and the CR3 write. And it missed the needed
FENCE_SWAPGS_KERNEL_ENTRY for the user gsbase case.
Add it back by changing the branches so that FENCE_SWAPGS_KERNEL_ENTRY
can cover both branches.
[ bp: Massage, fix typos, remove obsolete comment while at it. ]
Fixes: 96b2371413e8f ("x86/entry/64: Switch CR3 before SWAPGS in paranoid entry")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211126101209.8613-2-jiangshanlai@gmail.com
|
|
The QSPI flash node needs to have the required "jedec,spi-nor" in the
compatible string.
Fixes: 1df99da8953 ("ARM: dts: socfpga: Enable QSPI in Arria10 devkit")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
This is one of the last platforms using the old entry path.
While this code path is spread over a few files, it is fairly
straightforward to convert it into an equivalent C version,
leaving the existing algorithm and all the priority handling
the same.
Unlike most irqchip drivers, this means reading the status
register(s) in a loop and always handling the highest-priority
irq first.
The IOMD_IRQREQC and IOMD_IRQREQD registers are not actaully
used here, but I left the code in place for the time being,
to keep the conversion as direct as possible. It could be
removed in a cleanup on top.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ardb: drop obsolete IOMD_IRQREQC/IOMD_IRQREQD handling]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
IOMD_IRQREQC nor IOMD_IRQREQD are ever defined, so any conditionally
compiled code that depends on them is dead code, and can be removed.
Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
In the following commit:
025768a966a3 x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant
... we added the new task_size_max() inline, which uses X86_FEATURE_LA57,
but doesn't include <asm/cpufeatures.h> which defines the constant.
Due to the way alternatives macros work currently this doesn't get reported as an
immediate build error, only as a link error, if a .c file happens to include
<asm/page.h> first:
> ld: kernel/fork.o:(.altinstructions+0x98): undefined reference to `X86_FEATURE_LA57'
In the current upstream kernel no .c file includes <asm/page.h> before including
some other header that includes <asm/cpufeatures.h>, which is why this dependency
bug went unnoticed.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The TI part is equivalent to the NXP part, and its compatible value is
not documented in the DT bindings.
Note that while the Linux driver DT match table does not contain the
compatible value of the TI part, it could still match to this part, as
i2c_device_id-based matching ignores the vendor part of the compatible
value.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lkml.kernel.org/r/0c00cec971f5c405e47d04e493d854de0efc2e49.1638539629.git.geert+renesas@glider.be
|
|
Properly type the operands being passed to __put_user()/__get_user().
Otherwise, these routines truncate data for dependent instructions
(e.g., INSW) and only read/write one byte.
This has been tested by sending a string with REP OUTSW to a port and
then reading it back in with REP INSW on the same port.
Previous behavior was to only send and receive the first char of the
size. For example, word operations for "abcd" would only read/write
"ac". With change, the full string is now written and read back.
Fixes: f980f9c31a923 (x86/sev-es: Compile early handler code into kernel image)
Signed-off-by: Michael Sterritt <sterritt@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reviewed-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/20211119232757.176201-1-sterritt@google.com
|
|
Wire up the generic support for managing task stack allocations via vmalloc,
and implement the entry code that detects whether we faulted because of a
stack overrun (or future stack overrun caused by pushing the pt_regs array)
While this adds a fair amount of tricky entry asm code, it should be
noted that it only adds a TST + branch to the svc_entry path. The code
implementing the non-trivial handling of the overflow stack is emitted
out-of-line into the .text section.
Since on ARM, we rely on do_translation_fault() to keep PMD level page
table entries that cover the vmalloc region up to date, we need to
ensure that we don't hit such a stale PMD entry when accessing the
stack. So we do a dummy read from the new stack while still running from
the old one on the context switch path, and bump the vmalloc_seq counter
when PMD level entries in the vmalloc range are modified, so that the MM
switch fetches the latest version of the entries.
Note that we need to increase the per-mode stack by 1 word, to gain some
space to stash a GPR until we know it is safe to touch the stack.
However, due to the cacheline alignment of the struct, this does not
actually increase the memory footprint of the struct stack array at all.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
The original Thumb-2 enablement patches updated the stack realignment
code in svc_entry to work around the lack of a STMIB instruction in
Thumb-2, by subtracting 4 from the frame size, inverting the sense of
the misaligment check, and changing to a STMIA instruction and a final
stack push of a 4 byte quantity that results in the stack becoming
aligned at the end of the sequence. It also pushes and pops R0 to the
stack in order to have a temp register that Thumb-2 allows in general
purpose ALU instructions, as TST using SP is not permitted.
Both are a bit problematic for vmap'ed stacks, as using the stack is
only permitted after we decide that we did not overflow the stack, or
have already switched to the overflow stack.
As for the alignment check: the current approach creates a corner case
where, if the initial SUB of SP ends up right at the start of the stack,
we will end up subtracting another 8 bytes and overflowing it. This
means we would need to add the overflow check *after* the SUB that
deliberately misaligns the stack. However, this would require us to keep
local state (i.e., whether we performed the subtract or not) across the
overflow check, but without any GPRs or stack available.
So let's switch to an approach where we don't use the stack, and where
the alignment check of the stack pointer occurs in the usual way, as
this is guaranteed not to result in overflow. This means we will be able
to do the overflow check first.
While at it, switch to R1 so the mode stack pointer in R0 remains
accessible.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
The load-multiple instruction that essentially performs the switch_to
operation in ARM mode, by loading all callee save registers as well the
stack pointer and the program counter, is split into 3 separate loads
for Thumb-2, with the IP register used as a temporary to capture the
value of R4 before it gets overwritten.
We can clean this up a bit, by sticking with a single LDMIA instruction,
but one that pops SP and PC into IP and LR, respectively, and by using
ordinary move register and branch instructions to get those values into
SP and PC. This also allows us to move the set_current call closer to
the assignment of SP, reducing the window where those are mutually out
of sync. This is especially relevant for CONFIG_VMAP_STACK, which is
being introduced in a subsequent patch, where we need to issue a load
that might fault from the new stack while running from the old one, to
ensure that stale PMD entries in the VMALLOC space are synced up.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
When unwinding the stack from a stack overflow, we are likely to start
from a stack push instruction, given that this is the most common way to
grow the stack for compiler emitted code. This push instruction rarely
appears anywhere else than at offset 0x0 of the function, and if it
doesn't, the compiler tends to split up the unwind annotations, given
that the stack frame layout is apparently not the same throughout the
function.
This means that, in the general case, if the frame's PC points at the
first instruction covered by a certain unwind entry, there is no way the
stack frame that the unwind entry describes could have been created yet,
and so we are still on the stack frame of the caller in that case. So
treat this as a special case, and return with the new PC taken from the
frame's LR, without applying the unwind transformations to the virtual
register set.
This permits us to unwind the call stack on stack overflow when the
overflow was caused by a stack push on function entry.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
The memset implementation carves up the code in different sections, each
covered with their own unwind info. In this case, it is done in a way
similar to how the compiler might do it, to disambiguate between parts
where the return address is in LR and the SP is unmodified, and parts
where a stack frame is live, and the unwinder needs to know the size of
the stack frame and the location of the return address within it.
Only the placement of the unwind directives is slightly odd: the stack
pushes are placed in the wrong sections, which may confuse the unwinder
when attempting to unwind with PC pointing at the stack push in
question.
So let's fix this up, by reordering the directives and instructions as
appropriate.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
The memmove routine is a bit unusual in the way it manages the stack
pointer: depending on the execution path through the function, the SP
assumes different values as different subsets of the register file are
preserved and restored again. This is problematic when it comes to EHABI
unwind info, as it is not instruction accurate, and does not allow
tracking the SP value as it changes.
Commit 207a6cb06990c ("ARM: 8224/1: Add unwinding support for memmove
function") addressed this by carving up the function in different chunks
as far as the unwinder is concerned, and keeping a set of unwind
directives for each of them, each corresponding with the state of the
stack pointer during execution of the chunk in question. This not only
duplicates unwind info unnecessarily, but it also complicates unwinding
the stack upon overflow.
Instead, let's do what the compiler does when the SP is updated halfway
through a function, which is to use a frame pointer and emit the
appropriate unwind directives to communicate this to the unwinder.
Note that Thumb-2 uses R7 for this, while ARM uses R11 aka FP. So let's
avoid touching R7 in the body of the function, so that Thumb-2 can use
it as the frame pointer. R11 was not modified in the first place.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
The memcpy template is a bit unusual in the way it manages the stack
pointer: depending on the execution path through the function, the SP
assumes different values as different subsets of the register file are
preserved and restored again. This is problematic when it comes to EHABI
unwind info, as it is not instruction accurate, and does not allow
tracking the SP value as it changes.
Commit 279f487e0b471 ("ARM: 8225/1: Add unwinding support for memory
copy functions") addressed this by carving up the function in different
chunks as far as the unwinder is concerned, and keeping a set of unwind
directives for each of them, each corresponding with the state of the
stack pointer during execution of the chunk in question. This not only
duplicates unwind info unnecessarily, but it also complicates unwinding
the stack upon overflow.
Instead, let's do what the compiler does when the SP is updated halfway
through a function, which is to use a frame pointer and emit the
appropriate unwind directives to communicate this to the unwinder.
Note that Thumb-2 uses R7 for this, while ARM uses R11 aka FP. So let's
avoid touching R7 in the body of the template, so that Thumb-2 can use
it as the frame pointer. R11 was not modified in the first place.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
Now that we have enabled IRQ stacks, any softIRQs that are handled over
the back of a hard IRQ will run from the IRQ stack as well. However, any
synchronous softirq processing that happens when re-enabling softIRQs
from task context will still execute on that task's stack.
Since any call to local_bh_enable() at any level in the task's call
stack may trigger a softIRQ processing run, which could potentially
cause a task stack overflow if the combined stack footprints exceed the
stack's size, let's run these synchronous invocations of do_softirq() on
the IRQ stack as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
Restructure the code and add the unwind annotations so that both the
frame pointer unwinder as well as the EHABI unwind info based unwinder
will be able to follow the call stack through call_with_stack().
Since GCC and Clang use different formats for the stack frame, two
methods are implemented: a GCC version that pushes fp, sp, lr and pc for
compatibility with the frame pointer unwinder, and a second version that
works with Clang, as well as with the EHABI unwinder both in ARM and
Thumb2 modes.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
Now that we no longer rely on the stack pointer to access the current
task struct or thread info, we can implement support for IRQ stacks
cleanly as well.
Define a per-CPU IRQ stack and switch to this stack when taking an IRQ,
provided that we were not already using that stack in the interrupted
context. This is never the case for IRQs taken from user space, but ones
taken while running in the kernel could fire while one taken from user
space has not completed yet.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
The Clang backtrace code dereferences the link register value pulled
from the stack to decide whether the caller was a branch-and-link
instruction, in order to subsequently decode the offset to find the
start of the calling function. Unlike other loads in this routine, this
one is not protected by a fixup, and may therefore cause a crash if the
address in question is bogus.
So let's fix this, by treating the fault as a failure to decode the 'bl'
instruction. To avoid a label renum, reuse a fixup label that guards an
instruction that cannot fault to begin with.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
The existing code that dumps the contents of the pt_regs structure
passed to __entry routines does so while unwinding the callee frame, and
dereferences the stack pointer as a struct pt_regs*. This will no longer
work when we enable support for IRQ or overflow stacks, because the
struct pt_regs may live on the task stack, while we are executing from
another stack.
The unwinder has access to this information, but only while unwinding
the calling frame. So let's combine the exception stack dumping code
with the handling of the calling frame as well. By printing it before
dumping the caller/callee addresses, the output order is preserved.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
The unwind info based stack unwinder will make its own call to
dump_mem() to dump the exception stack, so give it external linkage.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
Implement support in the unwinder for dealing with multiple stacks.
This will be needed once we add support for IRQ stacks, or for the
overflow stack used by the vmap'ed stacks code.
This involves tracking the unwind opcodes that either update the virtual
stack pointer from another virtual register, or perform an explicit
subtract on the virtual stack pointer, and updating the low and high
bounds that we use to sanitize the stack pointer accordingly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
Add a bl_r macro that abstract the difference between the ways indirect
calls are performed on older and newer ARM architecture revisions.
The main difference is to prefer blx instructions over explicit LR
assignments when possible, as these tend to confuse the prediction logic
in out-of-order cores when speculating across a function return.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
This code appears to be no longer used so let's get rid of it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Keith Packard <keithpac@amazon.com>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
Currently, we implement the per-task stack protector for ARM using a GCC
plugin, due to lack of native compiler support. However, work is
underway to get this implemented in the compiler, which means we will be
able to deprecate the GCC plugin at some point.
In the meantime, we will need to support both, where the native compiler
implementation is obviously preferred. So let's wire this up in Kconfig
and the Makefile.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> # ARMv7M
|
|
Enabling the stack protector in the decompressor is of dubious value,
given that it uses a fixed value for the canary, cannot print any output
unless CONFIG_DEBUG_LL is enabled (which relies on board specific build
time settings), and is already disabled for a good chunk of the code
(libfdt).
So let's just disable it in the decompressor. This will make it easier
in the future to manage the command line options that would need to be
removed again in this context for the TLS register based stack
protector.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The Time Sync Event Router (TIMESYNC_INTRTR0) implements a set of
multiplexers to provide selection of active CPTS time sync events for
routing to CPTS capable modules.
This patch adds DT node TIMESYNC_INTRTR0 using "pinctrl-single" bindings.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20211202173114.9936-1-christian.gmeiner@gmail.com
|
|
A72 Cluster (chapter 1.3.1 [1]) has 48KB Icache, 32KB Dcache and 1MB L2 Cache
- ICache is 3-way set-associative
- Dcache is 2-way set-associative
- Line size are 64bytes
32KB (Dcache)/64 (fixed line length of 64 bytes) = 512 ways
512 ways / 2 (Dcache is 2-way per set) = 256 sets.
So, correct the d-cache-sets info.
[1] https://www.ti.com/lit/pdf/spruiu1
Fixes: d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC")
Reported-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211113042640.30955-1-nm@ti.com
|
|
A72's L2 cache[1] on J721e[2] is 1MB. A72's L2 is fixed line length of
64 bytes and 16-way set-associative cache structure.
1MB of L2 / 64 (line length) = 16384 ways
16384 ways / 16 = 1024 sets
Fix the l2 cache-sets.
[1] https://developer.arm.com/documentation/100095/0003/Level-2-Memory-System/About-the-L2-memory-system
[2] http://www.ti.com/lit/pdf/spruil1
Fixes: 2d87061e70de ("arm64: dts: ti: Add Support for J721E SoC")
Reported-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211113043639.4413-1-nm@ti.com
|
|
A72's L2 cache[1] on J7200[2] is 1MB. A72's L2 is fixed line length of
64 bytes and 16-way set-associative cache structure.
1MB of L2 / 64 (line length) = 16384 ways
16384 ways / 16 = 1024 sets
Fix the l2 cache-sets.
[1] https://developer.arm.com/documentation/100095/0003/Level-2-Memory-System/About-the-L2-memory-system
[2] https://www.ti.com/lit/pdf/spruiu1
Fixes: d361ed88455f ("arm64: dts: ti: Add support for J7200 SoC")
Reported-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211113043638.4358-1-nm@ti.com
|
|
A53's L2 cache[1] on AM642[2] is 256KB. A53's L2 is fixed line length
of 64 bytes and 16-way set-associative cache structure.
256KB of L2 / 64 (line length) = 4096 ways
4096 ways / 16 = 256 sets
Fix the l2 cache-sets.
[1] https://developer.arm.com/documentation/ddi0500/j/Level-2-Memory-System/About-the-L2-memory-system?lang=en
[2] https://www.ti.com/lit/pdf/spruim2
Fixes: 8abae9389bdb ("arm64: dts: ti: Add support for AM642 SoC")
Reported-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211113043635.4296-1-nm@ti.com
|
|
Fix 'dtbs_check' in serdes_ln_ctrl (mux@4080) node by changing the node
name to mux-controller@4080.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211126084555.17797-3-kishon@ti.com
|
|
Fix 'dtbs_check' in serdes_ln_ctrl (serdes-ln-ctrl@4080) node by
changing the node name to mux-controller@4080.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20211126084555.17797-2-kishon@ti.com
|
|
Tanix TX6 comes either with RTL8822BS or RTL8822CS wifi+bt combo module.
Wifi part is already enabled in tanix DTSI. Let's enable also bluetooth.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Both, Tanix TX6 and Tanix TX6 mini, have SDIO wifi module, albeit
different. However, driver can be autoprobed via SDIO ID.
Add MMC1 node, so kernel can discover wifi module and load driver for
it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
Tanix TX6 mini is less capable version of Tanix TX6 although it comes
with some features not present on Tanix TX6.
Basic specs:
- H6 SoC
- 2 GiB DDR3 RAM
- HDMI
- SPDIF
- 2x USB
- analogue audio
- CVBS
- SD card
- IR remote
- LED display
- fast ethernet
- XR819 wifi
- 16 GiB eMMC
Currently supported features doesn't differ that much from Tanix TX6,
but that will change soon.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
There is another very similar device to Tanix TX6, namely Tanix TX6
mini. Because most of the board design is shared, it makes sense to have
common nodes in DTSI file.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
|
|
The trampoline_pgd only maps the 0xfffffff000000000-0xffffffffffffffff
range of kernel memory (with 4-level paging). This range contains the
kernel's text+data+bss mappings and the module mapping space but not the
direct mapping and the vmalloc area.
This is enough to get the application processors out of real-mode, but
for code that switches back to real-mode the trampoline_pgd is missing
important parts of the address space. For example, consider this code
from arch/x86/kernel/reboot.c, function machine_real_restart() for a
64-bit kernel:
#ifdef CONFIG_X86_32
load_cr3(initial_page_table);
#else
write_cr3(real_mode_header->trampoline_pgd);
/* Exiting long mode will fail if CR4.PCIDE is set. */
if (boot_cpu_has(X86_FEATURE_PCID))
cr4_clear_bits(X86_CR4_PCIDE);
#endif
/* Jump to the identity-mapped low memory code */
#ifdef CONFIG_X86_32
asm volatile("jmpl *%0" : :
"rm" (real_mode_header->machine_real_restart_asm),
"a" (type));
#else
asm volatile("ljmpl *%0" : :
"m" (real_mode_header->machine_real_restart_asm),
"D" (type));
#endif
The code switches to the trampoline_pgd, which unmaps the direct mapping
and also the kernel stack. The call to cr4_clear_bits() will find no
stack and crash the machine. The real_mode_header pointer below points
into the direct mapping, and dereferencing it also causes a crash.
The reason this does not crash always is only that kernel mappings are
global and the CR3 switch does not flush those mappings. But if theses
mappings are not in the TLB already, the above code will crash before it
can jump to the real-mode stub.
Extend the trampoline_pgd to contain all kernel mappings to prevent
these crashes and to make code which runs on this page-table more
robust.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20211202153226.22946-5-joro@8bytes.org
|
|
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
memremap_compat_align is only relevant when ZONE_DEVICE is selected.
ZONE_DEVICE depends on ARCH_HAS_PTE_DEVMAP, which is only selected
by PPC_BOOK3S_64.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-13-npiggin@gmail.com
|
|
Radix never sets mmu_linear_psize so it's always 4K, which causes pcpu
atom_size to always be PAGE_SIZE. 64e sets it to 1GB always.
Make paths for these platforms to be explicit about what value they set
atom_size to.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-12-npiggin@gmail.com
|
|
This file contains functions and data common to radix, so rename it to
remove the hash_ prefix.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-11-npiggin@gmail.com
|
|
The radix code uses some of the psize variables. Move the common
ones from hash_utils.c to pgtable.c.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-10-npiggin@gmail.com
|
Stafford Horne
Linus Torvalds
Lai Jiangshan
Dinh Nguyen
Arnd Bergmann
Ard Biesheuvel
Ingo Molnar
Geert Uytterhoeven
Michael Sterritt
Christian Gmeiner
Nishanth Menon
Kishon Vijay Abraham I
Jernej Skrabec
Joerg Roedel
Jakub Kicinski
Heiko Carstens
Nicholas Piggin