| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In the new behavior, the sja1105 driver expects there to be explicit
RGMII delays present on the fixed-link ports, otherwise it will complain
that it falls back to legacy behavior, which is to apply RGMII delays
incorrectly derived from the phy-mode string.
In this case, the legacy behavior of the driver is to apply both RX and
TX delays. To preserve that, add explicit 2 nanosecond delays, which are
identical with what the driver used to add (a 90 degree phase shift).
The delays from the phy-mode are ignored by new kernels (it's still
RGMII as long as it's "rgmii*" something), and the explicit
{rx,tx}-internal-delay-ps properties are ignored by old kernels, so the
change works both ways.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The wlf,wm8962 Device Tree bindings do not specify a clock-names
property. Drop it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
A new 'chassis-type' root node property has recently been approved for
the device-tree specification, in order to provide a simple way for
userspace to detect the device form factor and adjust their behavior
accordingly.
This patch fills in this property for end-user devices (such as laptops,
smartphones and tablets) based on NXP ARM64 processors.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable and configure DWC3 and QUSB2 PHY to enable USB
functionality on the Redmi Note 7.
Signed-off-by: Alexey Min <alexey.min@gmail.com>
Co-developed-by: Dang Huynh <danct12@riseup.net>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211120214227.779742-9-danct12@riseup.net
|
|
This lets the user sees the framebuffer console.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211120214227.779742-8-danct12@riseup.net
|
|
This commit enable the SD card slot and internal MMC.
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211120214227.779742-7-danct12@riseup.net
|
|
This enables the volume down key as well as the power button.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211120214227.779742-5-danct12@riseup.net
|
|
Add most of the RPM PM660/PM660L regulators and the fixed ones,
defining the common electrical part of this platform.
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211120214227.779742-4-danct12@riseup.net
|
|
It's not worth duplicating the same node over and over again,
so let's keep the common bits in the pm660 DTSI, making only
changing the status and keycode necessary.
Also, disable RESIN/PWR by default just in case if there are
devices that doesn't use them.
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211120214227.779742-3-danct12@riseup.net
|
|
This makes eMMC/SD device number consistent.
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Dang Huynh <danct12@riseup.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211120214227.779742-2-danct12@riseup.net
|
|
Update interrupt-map parent address cells for sc7280
Similar to existing Qcom SoCs.
Fixes: 92e0ee9f8 ("arm64: dts: qcom: sc7280: Add PCIe and PHY related nodes")
Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1637060508-30375-4-git-send-email-pmaliset@codeaurora.org
|
|
Add pcie clock phandle for sc7280 SoC.
Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1637060508-30375-3-git-send-email-pmaliset@codeaurora.org
|
|
Replace pcie_1_pipe-clk clock name with pcie_1_pipe_clk
To match with dt binding.
Fixes: ab7772de8612 ("arm64: dts: qcom: SC7280: Add rpmhcc clock controller node")
Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1637060508-30375-2-git-send-email-pmaliset@codeaurora.org
|
|
When powering up the ps8640, we need to deassert PD right
after we turn on the vdd33 regulator. Unfortunately, the vdd33
regulator takes some time (~4ms) to turn on. Add in the delay
for the vdd33 regulator so that when the driver deasserts PD
that the regulator has had time to ramp.
Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211115030155.9395-1-yangcong5@huaqin.corp-partner.google.com
|
|
Configure the Last-Level Cache Controller for SM8350.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-16-konrad.dybcio@somainline.org
|
|
Configure ADSP, CDSP, MPSS, SLPI and IPA on SoMC Sagami.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-15-konrad.dybcio@somainline.org
|
|
Based on current driver availability, add either nodes or comments regarding
peripherals connected via I2C/SPI.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-14-konrad.dybcio@somainline.org
|
|
Add support for SONY Xperia 1 III (PDX215) and 5 III (PDX214) smartphones.
Both are based on the SM8350 Sagami platform and feature some really high-end
specs, such as:
- 4K (1 III / PRO-I) / 1080p (5 III), 120Hz HDR OLED 10-bit panels
- USB-C 3.1 with HDMI in (yes, phone as display!) and DP out
- 5G
- 8 or 12 gigs of ram, 128/256/512 gigs of storage
- A 3.5mm headphone jack, a RGB notification LED and a uSD card slot :)
- IP65/68 dust/water resistance
- Dual front-firing speakers and a lot of microphones
- Crazy complex camera hardware (especially on the PRO-I), which includes
4 cameras, an RGBIR sensor and a 3D iToF
The aforementioned PRO-I (PDX217) is not supported in this patch, because
even though it shares most of the code with 1 III, nobody really has it (yet?)
This only adds basic support for booting to a USB shell with a
bootloader-enabled display, support for all the awesome hardware listed above
will (hopefully) come (hopefully) soon.
In order to get a working boot image, you need to run (e.g. for 1 III):
cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm8350-sony-xperia-\
sagami-pdx215.dtb > .Image.gz-dtb
mkbootimg \
--kernel .Image.gz-dtb \
--ramdisk some_initrd.img \
--pagesize 4096 \
--base 0x0 \
--kernel_offset 0x8000 \
--ramdisk_offset 0x1000000 \
--tags_offset 0x100 \
--cmdline "SOME_CMDLINE" \
--dtb_offset 0x1f00000 \
--header_version 1 \
--os_version 11 \
--os_patch_level 2021-10 \ # or newer
-o boot.img-sony-xperia-pdx215
Then, you need to flash it on the device and get rid of all the
vendor_boot/dtbo mess:
fastboot flash boot boot.img-sony-xperia-pdx215
fastboot erase vendor_boot
fastboot flash dtbo emptydtbo.img
fastboot reboot
Where emptydtbo.img is a tiny file that consists of 2 bytes (all zeroes), doing
a "fastboot erase" won't cut it, the bootloader will go crazy and things will
fall apart when it tries to overlay random bytes from an empty partition onto a
perfectly good appended DTB.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-13-konrad.dybcio@somainline.org
|
|
Assign the iommus property to allow access to QUP hosts that were not set up by
the bootloader.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-12-konrad.dybcio@somainline.org
|
|
Set up I2C&SPI hosts and UARTs connected to WRAP2 and their respective pins.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-11-konrad.dybcio@somainline.org
|
|
Set up I2C&SPI hosts and UARTs connected to WRAP1 and their respective pins.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-10-konrad.dybcio@somainline.org
|
|
Set up I2C&SPI hosts and UARTs connected to WRAP0 and their respective pins.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-9-konrad.dybcio@somainline.org
|
|
Add all the clock names that the GCC driver expects to get via DT, so that the
clock handles can be filled as the development progresses.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-8-konrad.dybcio@somainline.org
|
|
Disable PON/RESIN keys by default and keep the RESIN keycode set-per-board, as
these settings are not common between devices (one cannot even assume all
devices have buttons nowadays..).
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-7-konrad.dybcio@somainline.org
|
|
Thermal zone names should not be longer than 20 names, which is indicated by
a message at boot. Change "camera-thermal-bottom" to "cam-thermal-bottom" to
fix it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-6-konrad.dybcio@somainline.org
|
|
Using interrupts = <&pdc X Y> makes the interrupt framework interpret this as
the &pdc-nth range of the main interrupt controller (GIC). Fix it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-5-konrad.dybcio@somainline.org
|
|
Arch timer runs at 19.2 MHz. Specify the rate in the timer node.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-4-konrad.dybcio@somainline.org
|
|
The redistributor properties were missing. Add them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-3-konrad.dybcio@somainline.org
|
|
Add the missing third QUPv3 master node.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-2-konrad.dybcio@somainline.org
|
|
Almost any board that boots and has a way to interact with it
(say for the rare cases of just-pstore or let's-rely-on-bootloader-setup)
needs to set some GPIOs, so it makes no sense to include gpio.h separately
each time. Hence move it to SoC DTSI.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211114012755.112226-1-konrad.dybcio@somainline.org
|
|
QUSB2 PHY requires vdd-supply for digital circuit operation. Add it for
platforms that miss it.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928022002.26286-4-shawn.guo@linaro.org
|
|
This platform actually doesn't have TUSB320, but rather TUSB320L.
The TUSB320 compatible string was used due to lack of support for
TUSB320L, and it was close enough to detect cable plug-in and
direction, but it was limited to upstream facing port mode only.
Now that support for TUSB320L is added[1], change node name and
compatible to match and allow it to be properly reset and have
its mode set to dual-role port.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=ce0320bd3872038569be360870e2d5251b975692
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211104111454.105875-1-y.oudjana@protonmail.com
|
|
Add a node and pin states for Cypress StreetFighter touchkey
controller.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211104104932.104046-1-y.oudjana@protonmail.com
|
|
Device tree for the Sony Xperia tone family of devices specifies
S9+S10+S11 SAW regulator as a part of the pmi8994_spmi_regulators device
tree node. However PMI8994 does not have these regulators, they are part
of the PM8994 device. All other MSM8996-based devices list them in the
pm8994_spmi_regulators device tree node. Move them accordingly.
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211104002949.2204727-5-dmitry.baryshkov@linaro.org
|
|
The qcom_rpm_smd_regulator driver uses vdd_lvs1_2-supply property to
specify the supply regulator for LVS1 and LVS2 (following the pin name
in the PMIC datasheet). Correct the board's device tree property, so
that the regulator supply is setup properly.
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211104002949.2204727-4-dmitry.baryshkov@linaro.org
|
|
The qcom_rpm_smd_regulator driver uses vdd_lvs1_2-supply property to
specify the supply regulator for LVS1 and LVS2 (following the pin name
in the PMIC datasheet). Correct the board's device tree property, so
that the regulator supply is setup properly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211104002949.2204727-3-dmitry.baryshkov@linaro.org
|
|
Specify that S11 (well, whole block of s8+s9+s10+s11) of pm8994 and S2
(s2 + s3) of pmi8994 are supplied by vph_pwr. While we are at it, add
regulator name to S11, so that is displayed as VDD_APCC in the system.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211104002949.2204727-2-dmitry.baryshkov@linaro.org
|
|
Specify firmware name to be used for the ADSP. Quoting Bjorn from the
respective apq8016-sbc commit:
The firmware for the modem and WiFi subsystems platform specific and is
signed with a OEM specific key (or a test key). In order to support more
than a single device it is therefor not possible to rely on the default
path and stash these files directly in the firmware directory.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211104002949.2204727-1-dmitry.baryshkov@linaro.org
|
|
Add support for SONY Xperia XZ2, XZ2 Compact and XZ3 smartphones, all based on
the Qualcomm SDM845 chipset. There also exists a fourth Tama device, the XZ2
Premium (Aurora) with a 4K display, but it's relatively rare.
The devices are affected by a scary UFS behaviour where sending a certain UFS
command (which is worked around on downstream) renders the device unbootable,
by effectively erasing the bootloader. Therefore UFS AND UFSPHY are strictly
disabled for now.
Downstream workaround:
https://github.com/kholk/kernel/commit/2e7a9ee1c91a016baa0b826a7752ec45663a0561
This platform's bootloader is not very nice either. To boot mainline you need
to flash a bogus DTBO (fastboot erasing may cut it, but it takes an inhumane
amount of time) - one that's just 4 bytes (all zeroes) seems to work just fine.
Of course, one can also provide a "normal" DTBO (device-specific DT overlayed
on top of the SoC DT), but that's not yet supported by the mainline kernel
build system.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211111184630.605035-1-konrad.dybcio@somainline.org
|
|
These properties aren't documented nor implemented in the driver.
Drop them.
Fixes warnings as:
$ make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/msm/gpu.yaml
...
arch/arm64/boot/dts/qcom/msm8996-mtp.dt.yaml: gpu@b00000: 'qcom,gpu-quirk-fault-detect-mask', 'qcom,gpu-quirk-two-pass-use-wfi' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/display/msm/gpu.yaml
...
Fixes: 69cc3114ab0f ("arm64: dts: Add Adreno GPU definitions")
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211030100413.28370-1-david@ixit.cz
|
|
Support Homestar rev4 board where Parade ps8640 is added as the
second source edp bridge.
Support different edp bridge chips in different board revisions,
now we move the #incldue line of the edp bridge dts fragment (e.g.
sc7180-trogdor-ti-sn65dsi86.dtsi) from "sc7180-trogdor-homestar.dtsi"
to per-board-rev dts files.
Since the edp bridge dts fragment overrides 'dsi0_out', which is
defined in "sc7180.dtsi", move the #incldue line of "sc7180.dtsi" from
"sc7180-trogdor-homestar.dtsi" to per-board-rev dts files too, before
the #include line of the edp bridge dts fragment.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211029152647.v3.4.If7aaa8e36f1269acae5488035bd62ce543756bf8@changeid
|
|
Support Lazor/Limozeen rev9 board where Parade ps8640 is added as the
second source edp bridge.
To support different edp bridge chips in different board revisions,
now we move the #incldue line of the edp bridge dts fragment (e.g.
sc7180-trogdor-ti-sn65dsi86.dtsi) from "sc7180-trogdor-lazor.dtsi" to
per-board-rev dts files.
Since the edp bridge dts fragment overrides 'dsi0_out', which is
defined in "sc7180.dtsi", move the #incldue line of "sc7180.dtsi" from
"sc7180-trogdor-lazor.dtsi" to per-board-rev dts files too, before
the #include line of the edp bridge dts fragment.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211029152647.v3.3.Ie56f55924f5c7706fe3194e710bbef6fdb8b5bc6@changeid
|
|
MSM DSI host driver actually parses "data-lanes" in DT and compare
it with the number of DSI lanes the bridge driver sets for
mipi_dsi_device. So we need to always specify "data-lanes" for the
DSI host output. As of now, "data-lanes" is added to ti-sn65dsi86 dts
fragment, but missing in parade-ps8640 dts fragment, which requires
a fixup.
Since we'll do 4-lane DSI regardless of which bridge chip is used,
instead of adding "data-lanes" to parade-ps8640 dts fragment, let's
just move "data-lanes" from the bridge dts to sc7180-trogdor.dtsi.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211029152647.v3.2.If23c83a786fc4d318a1986f43803f22b4b1d82cd@changeid
|
|
The edp bridge dts fragment files use the macros defined in
'dt-bindings/gpio/gpio.h'.
To help us more flexibly order the #include lines of dts files in a
board-revision-specific dts file, let's include the gpio header in the
bridge dts fragment files themselves.
Signed-off-by: Philip Chen <philipchen@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211029152647.v3.1.Ie17e51ad3eb91d72826ce651ca2786534a360210@changeid
|
|
Merge misc fixes from Andrew Morton:
"15 patches.
Subsystems affected by this patch series: ipc, hexagon, mm (swap,
slab-generic, kmemleak, hugetlb, kasan, damon, and highmem), and proc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
proc/vmcore: fix clearing user buffer by properly using clear_user()
kmap_local: don't assume kmap PTEs are linear arrays in memory
mm/damon/dbgfs: fix missed use of damon_dbgfs_lock
mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocation
kasan: test: silence intentional read overflow warnings
hugetlb, userfaultfd: fix reservation restore on userfaultfd error
hugetlb: fix hugetlb cgroup refcounting during mremap
mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
hexagon: ignore vmlinux.lds
hexagon: clean up timer-regs.h
hexagon: export raw I/O routines for modules
mm: emit the "free" trace report before freeing memory in kmem_cache_free()
shm: extend forced shm destroy to support objects from several IPC nses
ipc: WARN if trying to remove ipc object which is absent
mm/swap.c:put_pages_list(): reinitialise the page list
|
|
Pull s390 updates from Heiko Carstens:
- Add missing Kconfig option for ftrace direct multi sample, so it can
be compiled again, and also add s390 support for this sample.
- Update Christian Borntraeger's email address.
- Various fixes for memory layout setup. Besides other this makes it
possible to load shared DCSS segments again.
- Fix copy to user space of swapped kdump oldmem.
- Remove -mstack-guard and -mstack-size compile options when building
vdso binaries. This can happen when CONFIG_VMAP_STACK is disabled and
results in broken vdso code which causes more or less random
exceptions. Also remove the not needed -nostdlib option.
- Fix memory leak on cpu hotplug and return code handling in kexec
code.
- Wire up futex_waitv system call.
- Replace snprintf with sysfs_emit where appropriate.
* tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
ftrace/samples: add s390 support for ftrace direct multi sample
ftrace/samples: add missing Kconfig option for ftrace direct multi sample
MAINTAINERS: update email address of Christian Borntraeger
s390/kexec: fix memory leak of ipl report buffer
s390/kexec: fix return code handling
s390/dump: fix copying to user-space of swapped kdump oldmem
s390: wire up sys_futex_waitv system call
s390/vdso: filter out -mstack-guard and -mstack-size
s390/vdso: remove -nostdlib compiler flag
s390: replace snprintf in show functions with sysfs_emit
s390/boot: simplify and fix kernel memory layout setup
s390/setup: re-arrange memblock setup
s390/setup: avoid using memblock_enforce_memory_limit
s390/setup: avoid reserving memory above identity mapping
|
|
The kmap_local conversion broke the ARM architecture, because the new
code assumes that all PTEs used for creating kmaps form a linear array
in memory, and uses array indexing to look up the kmap PTE belonging to
a certain kmap index.
On ARM, this cannot work, not only because the PTE pages may be
non-adjacent in memory, but also because ARM/!LPAE interleaves hardware
entries and extended entries (carrying software-only bits) in a way that
is not compatible with array indexing.
Fortunately, this only seems to affect configurations with more than 8
CPUs, due to the way the per-CPU kmap slots are organized in memory.
Work around this by permitting an architecture to set a Kconfig symbol
that signifies that the kmap PTEs do not form a lineary array in memory,
and so the only way to locate the appropriate one is to walk the page
tables.
Link: https://lore.kernel.org/linux-arm-kernel/20211026131249.3731275-1-ardb@kernel.org/
Link: https://lkml.kernel.org/r/20211116094737.7391-1-ardb@kernel.org
Fixes: 2a15ba82fa6c ("ARM: highmem: Switch to generic kmap atomic")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After building allmodconfig, there is an untracked vmlinux.lds file in
arch/hexagon/kernel:
$ git ls-files . --exclude-standard --others
arch/hexagon/kernel/vmlinux.lds
Ignore it as all other architectures have.
Link: https://lkml.kernel.org/r/20211115174250.1994179-4-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When building allmodconfig, there is a warning about TIMER_ENABLE being
redefined:
drivers/clocksource/timer-oxnas-rps.c:39:9: error: 'TIMER_ENABLE' macro redefined [-Werror,-Wmacro-redefined]
#define TIMER_ENABLE BIT(7)
^
arch/hexagon/include/asm/timer-regs.h:13:9: note: previous definition is here
#define TIMER_ENABLE 0
^
1 error generated.
The values in this header are only used in one file each, if they are
used at all. Remove the header and sink all of the constants into their
respective files.
TCX0_CLK_RATE is only used in arch/hexagon/include/asm/timex.h
TIMER_ENABLE, RTOS_TIMER_INT, RTOS_TIMER_REGS_ADDR are only used in
arch/hexagon/kernel/time.c.
SLEEP_CLK_RATE and TIMER_CLR_ON_MATCH have both been unused since the
file's introduction in commit 71e4a47f32f4 ("Hexagon: Add time and timer
functions").
TIMER_ENABLE is redefined as BIT(0) so the shift is moved into the
definition, rather than its use.
Link: https://lkml.kernel.org/r/20211115174250.1994179-3-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "Fixes for ARCH=hexagon allmodconfig", v2.
This series fixes some issues noticed with ARCH=hexagon allmodconfig.
This patch (of 3):
When building ARCH=hexagon allmodconfig, the following errors occur:
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/svc-i3c-master.ko] undefined!
ERROR: modpost: "__raw_writesl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
ERROR: modpost: "__raw_writesl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
ERROR: modpost: "__raw_readsl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
Export these symbols so that modules can use them without any errors.
Link: https://lkml.kernel.org/r/20211115174250.1994179-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20211115174250.1994179-2-nathan@kernel.org
Fixes: 013bf24c3829 ("Hexagon: Provide basic implementation and/or stubs for I/O routines.")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Vladimir Oltean
Geert Uytterhoeven
Arnaud Ferraris
Alexey Min
Dang Huynh
Prasad Malisetty
yangcong
Konrad Dybcio
Shawn Guo
Yassine Oudjana
Dmitry Baryshkov
David Heidelberg
Philip Chen
Linus Torvalds
Ard Biesheuvel
Nathan Chancellor