| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
According to the latest uncore document, DATA_REQ_OF_CPU (0x83),
DATA_REQ_BY_CPU (0xc0) and COMP_BUF_OCCUPANCY (0xd5) events have
constraints. Add uncore IIO constraints for Snowridge.
Fixes: 210cc5f9db7a ("perf/x86/intel/uncore: Add uncore support for Snow Ridge server")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20211115090334.3789-4-alexander.antonov@linux.intel.com
|
|
According to the latest uncore document, COMP_BUF_OCCUPANCY (0xd5) event
can be collected on 2-3 counters. Update uncore IIO event constraints for
Skylake Server.
Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20211115090334.3789-3-alexander.antonov@linux.intel.com
|
|
According Uncore Reference Manual: any of the CHA events may be filtered
by Thread/Core-ID by using tid modifier in CHA Filter 0 Register.
Update skx_cha_hw_config() to follow Uncore Guide.
Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20211115090334.3789-2-alexander.antonov@linux.intel.com
|
|
Changeset 2f5947dfcaec ("Documentation: move Documentation/virtual to Documentation/virt")
renamed: Documentation/virtual/kvm/vcpu-requests.rst
to: Documentation/virt/kvm/vcpu-requests.rst.
Update its cross-reference accordingly.
Fixes: 2f5947dfcaec ("Documentation: move Documentation/virtual to Documentation/virt")
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Commit 4f86a06e2d6e ("irqdomain: Make normal and nomap irqdomains
exclusive") introduced an IRQ_DOMAIN_FLAG_NO_MAP flag to isolate the
'nomap' domains still in use under the powerpc arch. With this new
flag, the revmap_tree of the IRQ domain is not used anymore. This
change broke the support of shared LSIs [1] in the XIVE driver because
it was relying on a lookup in the revmap_tree to query previously
mapped interrupts. Linux now creates two distinct IRQ mappings on the
same HW IRQ which can lead to unexpected behavior in the drivers.
The XIVE IRQ domain is not a direct mapping domain and its HW IRQ
interrupt number space is rather large : 1M/socket on POWER9 and
POWER10, change the XIVE driver to use a 'tree' domain type instead.
[1] For instance, a linux KVM guest with virtio-rng and virtio-balloon
devices.
Fixes: 4f86a06e2d6e ("irqdomain: Make normal and nomap irqdomains exclusive")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211116134022.420412-1-clg@kaod.org
|
|
The SGX driver maintains a single global free page counter,
sgx_nr_free_pages, that reflects the number of free pages available
across all NUMA nodes. Correspondingly, a list of free pages is
associated with each NUMA node and sgx_nr_free_pages is updated
every time a page is added or removed from any of the free page
lists. The main usage of sgx_nr_free_pages is by the reclaimer
that runs when it (sgx_nr_free_pages) goes below a watermark
to ensure that there are always some free pages available to, for
example, support efficient page faults.
With sgx_nr_free_pages accessed and modified from a few places
it is essential to ensure that these accesses are done safely but
this is not the case. sgx_nr_free_pages is read without any
protection and updated with inconsistent protection by any one
of the spin locks associated with the individual NUMA nodes.
For example:
CPU_A CPU_B
----- -----
spin_lock(&nodeA->lock); spin_lock(&nodeB->lock);
... ...
sgx_nr_free_pages--; /* NOT SAFE */ sgx_nr_free_pages--;
spin_unlock(&nodeA->lock); spin_unlock(&nodeB->lock);
Since sgx_nr_free_pages may be protected by different spin locks
while being modified from different CPUs, the following scenario
is possible:
CPU_A CPU_B
----- -----
{sgx_nr_free_pages = 100}
spin_lock(&nodeA->lock); spin_lock(&nodeB->lock);
sgx_nr_free_pages--; sgx_nr_free_pages--;
/* LOAD sgx_nr_free_pages = 100 */ /* LOAD sgx_nr_free_pages = 100 */
/* sgx_nr_free_pages-- */ /* sgx_nr_free_pages-- */
/* STORE sgx_nr_free_pages = 99 */ /* STORE sgx_nr_free_pages = 99 */
spin_unlock(&nodeA->lock); spin_unlock(&nodeB->lock);
In the above scenario, sgx_nr_free_pages is decremented from two CPUs
but instead of sgx_nr_free_pages ending with a value that is two less
than it started with, it was only decremented by one while the number
of free pages were actually reduced by two. The consequence of
sgx_nr_free_pages not being protected is that its value may not
accurately reflect the actual number of free pages on the system,
impacting the availability of free pages in support of many flows.
The problematic scenario is when the reclaimer does not run because it
believes there to be sufficient free pages while any attempt to allocate
a page fails because there are no free pages available. In the SGX driver
the reclaimer's watermark is only 32 pages so after encountering the
above example scenario 32 times a user space hang is possible when there
are no more free pages because of repeated page faults caused by no
free pages made available.
The following flow was encountered:
asm_exc_page_fault
...
sgx_vma_fault()
sgx_encl_load_page()
sgx_encl_eldu() // Encrypted page needs to be loaded from backing
// storage into newly allocated SGX memory page
sgx_alloc_epc_page() // Allocate a page of SGX memory
__sgx_alloc_epc_page() // Fails, no free SGX memory
...
if (sgx_should_reclaim(SGX_NR_LOW_PAGES)) // Wake reclaimer
wake_up(&ksgxd_waitq);
return -EBUSY; // Return -EBUSY giving reclaimer time to run
return -EBUSY;
return -EBUSY;
return VM_FAULT_NOPAGE;
The reclaimer is triggered in above flow with the following code:
static bool sgx_should_reclaim(unsigned long watermark)
{
return sgx_nr_free_pages < watermark &&
!list_empty(&sgx_active_page_list);
}
In the problematic scenario there were no free pages available yet the
value of sgx_nr_free_pages was above the watermark. The allocation of
SGX memory thus always failed because of a lack of free pages while no
free pages were made available because the reclaimer is never started
because of sgx_nr_free_pages' incorrect value. The consequence was that
user space kept encountering VM_FAULT_NOPAGE that caused the same
address to be accessed repeatedly with the same result.
Change the global free page counter to an atomic type that
ensures simultaneous updates are done safely. While doing so, move
the updating of the variable outside of the spin lock critical
section to which it does not belong.
Cc: stable@vger.kernel.org
Fixes: 901ddbb9ecf5 ("x86/sgx: Add a basic NUMA allocation scheme to sgx_alloc_epc_page()")
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lkml.kernel.org/r/a95a40743bbd3f795b465f30922dde7f1ea9e0eb.1637004094.git.reinette.chatre@intel.com
|
|
Add a separate, local mask for tracking AVX512 usage which does not
include the opmask xfeature set. Opmask registers usage does not cause
frequency throttling so it is a completely unnecessary false positive.
While at it, carve it out into a separate function to keep that
abomination extracted out.
[ bp: Rediff and cleanup ontop of 5.16-rc1. ]
Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20210920053951.4093668-1-goldstein.w.n@gmail.com
|
|
Tanix TX6 board has SPDIF connector in form of 3.5 mm jack.
Add support for it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211115201112.452696-1-jernej.skrabec@gmail.com
|
|
In the current code, the actual max tail call count is 33 which is greater
than MAX_TAIL_CALL_CNT (defined as 32). The actual limit is not consistent
with the meaning of MAX_TAIL_CALL_CNT and thus confusing at first glance.
We can see the historical evolution from commit 04fd61ab36ec ("bpf: allow
bpf programs to tail-call other bpf programs") and commit f9dabe016b63
("bpf: Undo off-by-one in interpreter tail call count limit"). In order
to avoid changing existing behavior, the actual limit is 33 now, this is
reasonable.
After commit 874be05f525e ("bpf, tests: Add tail call test suite"), we can
see there exists failed testcase.
On all archs when CONFIG_BPF_JIT_ALWAYS_ON is not set:
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:0 ret 34 != 33 FAIL
On some archs:
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:1 ret 34 != 33 FAIL
Although the above failed testcase has been fixed in commit 18935a72eb25
("bpf/tests: Fix error in tail call limit tests"), it would still be good
to change the value of MAX_TAIL_CALL_CNT from 32 to 33 to make the code
more readable.
The 32-bit x86 JIT was using a limit of 32, just fix the wrong comments and
limit to 33 tail calls as the constant MAX_TAIL_CALL_CNT updated. For the
mips64 JIT, use "ori" instead of "addiu" as suggested by Johan Almbladh.
For the riscv JIT, use RV_REG_TCC directly to save one register move as
suggested by Björn Töpel. For the other implementations, no function changes,
it does not change the current limit 33, the new value of MAX_TAIL_CALL_CNT
can reflect the actual max tail call count, the related tail call testcases
in test_bpf module and selftests can work well for the interpreter and the
JIT.
Here are the test results on x86_64:
# uname -m
x86_64
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
# rmmod test_bpf
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [8/8 JIT'ed]
# rmmod test_bpf
# ./test_progs -t tailcalls
#142 tailcalls:OK
Summary: 1/11 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/1636075800-3264-1-git-send-email-yangtiezhu@loongson.cn
|
|
In vcpu_load_eoi_exitmap(), currently the eoi_exit_bitmap[4] array is
initialized only when Hyper-V context is available, in other path it is
just passed to kvm_x86_ops.load_eoi_exitmap() directly from on the stack,
which would cause unexpected interrupt delivery/handling issues, e.g. an
*old* linux kernel that relies on PIT to do clock calibration on KVM might
randomly fail to boot.
Fix it by passing ioapic_handled_vectors to load_eoi_exitmap() when Hyper-V
context is not available.
Fixes: f2bc14b69c38 ("KVM: x86: hyper-v: Prepare to meet unallocated Hyper-V context")
Cc: stable@vger.kernel.org
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Huang Le <huangle1@jd.com>
Message-Id: <62115b277dab49ea97da5633f8522daf@jd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Tested with futex kselftests.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
When CONFIG_VMAP_STACK is disabled, the user can enable CONFIG_STACK_CHECK,
which adds a stack overflow check to each C function in the kernel. This is
also done for functions in the vdso page. These functions are run in user
context and user stack sizes are usually different to what the kernel uses.
This might trigger the stack check although the stack size is valid.
Therefore filter the -mstack-guard and -mstack-size flags when compiling
vdso C files.
Cc: stable@kernel.org # 5.10+
Fixes: 4bff8cb54502 ("s390: convert to GENERIC_VDSO")
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The -nostdlib option requests the compiler to not use the standard
system startup files or libraries when linking. It is effective only
when $(CC) is used as a linker driver.
Since commit 2b2a25845d53 ("s390/vdso: Use $(LD) instead of $(CC) to
link vDSO"), $(LD) is directly used, hence -nostdlib is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20211107162111.323701-1-masahiroy@kernel.org
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Initial KASAN shadow memory range was picked to preserve original kernel
modules area position. With protected execution support, which might
impose addressing limitation on vmalloc area and hence affect modules
area position, current fixed KASAN shadow memory range is only making
kernel memory layout setup more complex. So move it to the very end of
available virtual space and simplify calculations.
At the same time return to previous kernel address space split. In
particular commit 0c4f2623b957 ("s390: setup kernel memory layout
early") introduced precise identity map size calculation and keeping
vmemmap left most starting from a fresh region table entry. This didn't
take into account additional mapping region requirement for potential
DCSS mapping above available physical memory. So go back to virtual
space split between 1:1 mapping & vmemmap array once vmalloc area size
is subtracted.
Cc: stable@vger.kernel.org
Fixes: 0c4f2623b957 ("s390: setup kernel memory layout early")
Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
- Avoid using ULONG_MAX in memblock_remove, it has no functional change
but makes memblock_dbg output a range which makes sense.
- Actually finish memblock memory setup before doing amode31/cr/uv
setup.
- Move memblock_dump_all() debug output after memblock memory setup is
complete. This gives us final "memory" regions if they were trimmed
due to addressing limits and still "physmem" regions as original info
which came from mem_detect.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
There is a difference in how architectures treat "mem=" option. For some
that is an amount of online memory, for s390 and x86 this is the limiting
max address. Some memblock api like memblock_enforce_memory_limit()
take limit argument and explicitly treat it as the size of online memory,
and use __find_max_addr to convert it to an actual max address. Current
s390 usage:
memblock_enforce_memory_limit(memblock_end_of_DRAM());
yields different results depending on presence of memory holes (offline
memory blocks in between online memory). If there are no memory holes
limit == max_addr in memblock_enforce_memory_limit() and it does trim
online memory and reserved memory regions. With memory holes present it
actually does nothing.
Since we already use memblock_remove() explicitly to trim online memory
regions to potential limit (think mem=, kdump, addressing limits, etc.)
drop the usage of memblock_enforce_memory_limit() altogether. Trimming
reserved regions should not be required, since we now use
memblock_set_current_limit() to limit allocations and any explicit memory
reservations above the limit is an actual problem we should not hide.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Such reserved memory region, if not cleaned up later causes problems when
memblock_free_all() is called to release free pages to the buddy allocator
and those reserved regions are carried over to reserve_bootmem_region()
which marks the pages as PageReserved.
Instead use memblock_set_current_limit() to make sure memblock allocations
do not go over identity mapping (which could happen when "mem=" option
is used or during kdump).
Cc: stable@vger.kernel.org
Fixes: 73045a08cf55 ("s390: unify identity mapping limits handling")
Reported-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
As spotted and explained in commit c12ab8dbc492 ("powerpc/8xx: Fix
Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST"), the selection
of STRICT_KERNEL_RWX without selecting DEBUG_RODATA_TEST has spotted
the lack of the DIRTY bit in the pinned kernel data TLBs.
This problem should have been detected a lot earlier if things had
been working as expected. But due to an incredible level of chance or
mishap, this went undetected because of a set of bugs: In fact the
DTLBs were not pinned, because instead of setting the reserve bit
in MD_CTR, it was set in MI_CTR that is the register for ITLBs.
But then, another huge bug was there: the physical address was
reset to 0 at the boundary between RO and RW areas, leading to the
same physical space being mapped at both 0xc0000000 and 0xc8000000.
This had by miracle no consequence until now because the entry was
not really pinned so it was overwritten soon enough to go undetected.
Of course, now that we really pin the DTLBs, it must be fixed as well.
Fixes: f76c8f6d257c ("powerpc/8xx: Add function to set pinned TLBs")
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Depends-on: c12ab8dbc492 ("powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a21e9a057fe2d247a535aff0d157a54eefee017a.1636963688.git.christophe.leroy@csgroup.eu
|
|
The conversion from __copy_from_user() to __get_user() by
commit d3ccc9781560 ("powerpc/signal: Use __get_user() to copy
sigset_t") introduced a regression in __get_user_sigset() for
powerpc/32. The bug was subsequently moved into
unsafe_get_user_sigset().
The bug is due to the copied 64 bit value being truncated to
32 bits while being assigned to dst->sig[0]
The regression was reported by users of the Xorg packages distributed in
Debian/powerpc --
"The symptoms are that the fb screen goes blank, with the backlight
remaining on and no errors logged in /var/log; wdm (or startx) run
with no effect (I tried logging in in the blind, with no effect).
And they are hard to kill, requiring 'kill -KILL ...'"
Fix the regression by copying each word of the sigset, not only the
first one.
__get_user_sigset() was tentatively optimised to copy 64 bits at once
in order to minimise KUAP unlock/lock impact, but the unsafe variant
doesn't suffer that, so it can just copy words.
Fixes: 887f3ceb51cd ("powerpc/signal32: Convert do_setcontext[_tm]() to user access block")
Cc: stable@vger.kernel.org # v5.13+
Reported-by: Finn Thain <fthain@linux-m68k.org>
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/99ef38d61c0eb3f79c68942deb0c35995a93a777.1636966353.git.christophe.leroy@csgroup.eu
|
|
Commit 52bda69ae8b5 ("powerpc/fsl_booke: Tell map_mem_in_cams() if
init is done") was supposed to just add an additional parameter to
map_mem_in_cams() and always set it to 'true' at that time.
But a few call sites were messed up. Fix them.
Fixes: 52bda69ae8b5 ("powerpc/fsl_booke: Tell map_mem_in_cams() if init is done")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d319f2a9367d4d08fd2154e506101bd5f100feeb.1636967119.git.christophe.leroy@csgroup.eu
|
|
clang warns about one missing fallthrough that gcc ignores:
arch/arm/mach-s3c/mach-jive.c:250:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
Add it here as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211116092053.4042799-1-arnd@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
|
|
trans_pgd_create_copy() can hit "VM_BUG_ON(mm != &init_mm)" in the
function pmd_populate_kernel().
This is the combined consequence of commit 5de59884ac0e ("arm64:
trans_pgd: pass NULL instead of init_mm to *_populate functions"), which
replaced &init_mm with NULL and commit 59511cfd08f3 ("arm64: mm: use XN
table mapping attributes for user/kernel mappings"), which introduced
the VM_BUG_ON.
Since the former sounds reasonable, it is better to work on the later.
From the perspective of trans_pgd, two groups of functions are
considered in the later one:
pmd_populate_kernel()
mm == NULL should be fixed, else it hits VM_BUG_ON()
p?d_populate()
mm == NULL means PXN, that is OK, since trans_pgd only copies a
linear map, no execution will happen on the map.
So it is good enough to just relax VM_BUG_ON() to disregard mm == NULL
Fixes: 59511cfd08f3 ("arm64: mm: use XN table mapping attributes for user/kernel mappings")
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Cc: <stable@vger.kernel.org> # 5.13.x
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://lore.kernel.org/r/20211112052214.9086-1-kernelfans@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When CONFIG_FUNCTION_GRAPH_TRACER is selected and the function graph
tracer is in use, unwind_frame() may erroneously associate a traced
function with an incorrect return address. This can happen when starting
an unwind from a pt_regs, or when unwinding across an exception
boundary.
This can be seen when recording with perf while the function graph
tracer is in use. For example:
| # echo function_graph > /sys/kernel/debug/tracing/current_tracer
| # perf record -g -e raw_syscalls:sys_enter:k /bin/true
| # perf report
... reports the callchain erroneously as:
| el0t_64_sync
| el0t_64_sync_handler
| el0_svc_common.constprop.0
| perf_callchain
| get_perf_callchain
| syscall_trace_enter
| syscall_trace_enter
... whereas when the function graph tracer is not in use, it reports:
| el0t_64_sync
| el0t_64_sync_handler
| el0_svc
| do_el0_svc
| el0_svc_common.constprop.0
| syscall_trace_enter
| syscall_trace_enter
The underlying problem is that ftrace_graph_get_ret_stack() takes an
index offset from the most recent entry added to the fgraph return
stack. We start an unwind at offset 0, and increment the offset each
time we encounter a rewritten return address (i.e. when we see
`return_to_handler`). This is broken in two cases:
1) Between creating a pt_regs and starting the unwind, function calls
may place entries on the stack, leaving an arbitrary offset which we
can only determine by performing a full unwind from the caller of the
unwind code (and relying on none of the unwind code being
instrumented).
This can result in erroneous entries being reported in a backtrace
recorded by perf or kfence when the function graph tracer is in use.
Currently show_regs() is unaffected as dump_backtrace() performs an
initial unwind.
2) When unwinding across an exception boundary (whether continuing an
unwind or starting a new unwind from regs), we currently always skip
the LR of the interrupted context. Where this was live and contained
a rewritten address, we won't consume the corresponding fgraph ret
stack entry, leaving subsequent entries off-by-one.
This can result in erroneous entries being reported in a backtrace
performed by any in-kernel unwinder when that backtrace crosses an
exception boundary, with entries after the boundary being reported
incorrectly. This includes perf, kfence, show_regs(), panic(), etc.
To fix this, we need to be able to uniquely identify each rewritten
return address such that we can map this back to the original return
address. We can use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR to associate
each rewritten return address with a unique location on the stack. As
the return address is passed in the LR (and so is not guaranteed a
unique location in memory), we use the FP upon entry to the function
(i.e. the address of the caller's frame record) as the return address
pointer. Any nested call will have a different FP value as the caller
must create its own frame record and update FP to point to this.
Since ftrace_graph_ret_addr() requires the return address with the PAC
stripped, the stripping of the PAC is moved before the fixup of the
rewritten address. As we would unconditionally strip the PAC, moving
this earlier is not harmful, and we can avoid a redundant strip in the
return address fixup code.
I've tested this with the perf case above, the ftrace selftests, and
a number of ad-hoc unwinder tests. The tests all pass, and I have seen
no unexpected behaviour as a result of this change. I've tested with
pointer authentication under QEMU TCG where magic-sysrq+l correctly
recovers the original return addresses.
Note that this doesn't fix the issue of skipping a live LR at an
exception boundary, which is a more general problem and requires more
substantial rework. Were we to consume the LR in all cases this would
result in warnings where the interrupted context's LR contains
`return_to_handler`, but the FP has been altered, e.g.
| func:
| <--- ftrace entry ---> // logs FP & LR, rewrites LR
| STP FP, LR, [SP, #-16]!
| MOV FP, SP
| <--- INTERRUPT --->
... as ftrace_graph_get_ret_stack() fill not find a matching entry,
triggering the WARN_ON_ONCE() in unwind_frame().
Link: https://lore.kernel.org/r/20211025164925.GB2001@C02TD0UTHF1T.local
Link: https://lore.kernel.org/r/20211027132529.30027-1-mark.rutland@arm.com
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211029162245.39761-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Provide a simple implementation of clk_get_parent() in the
lantiq subarch so that callers of it will build without errors.
Fixes this build error:
ERROR: modpost: "clk_get_parent" [drivers/iio/adc/ingenic-adc.ko] undefined!
Fixes: 171bb2f19ed6 ("MIPS: Lantiq: Add initial support for Lantiq SoCs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: linux-mips@vger.kernel.org
Cc: John Crispin <john@phrozen.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
BCM63XX selects HAVE_LEGACY_CLK but does not provide/support
clk_get_parent(), so add a simple implementation of that
function so that callers of it will build without errors.
Fixes these build errors:
mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4770_adc_init_clk_div':
ingenic-adc.c:(.text+0xe4): undefined reference to `clk_get_parent'
mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4725b_adc_init_clk_div':
ingenic-adc.c:(.text+0x1b8): undefined reference to `clk_get_parent'
Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." )
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Artur Rojek <contact@artur-rojek.eu>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
In the case where fw_getenv returns an error when fetching values
for ememsizea and memsize then variable phys_memsize is not assigned
a variable and will be uninitialized on a zero check of phys_memsize.
Fix this by initializing phys_memsize to zero.
Cleans up cppcheck error:
arch/mips/generic/yamon-dt.c:100:7: error: Uninitialized variable: phys_memsize [uninitvar]
Fixes: f41d2430bbd6 ("MIPS: generic/yamon-dt: Support > 256MB of RAM")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Wire up the futex_waitv syscall.
Fix Build warning: #warning syscall futex_waitv not implemented [-Wcpp]
Signed-off-by: Wang Haojun <wanghaojun@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Add SPI NOR partition for uefi.
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211019060155.945-4-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This commit adds configuration i2c busses for 24 NVMe slots and
2 M2 NVMe slots found on Mt.Jade hardware reference platform
with Ampere's Altra processor family.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211019060155.945-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
This change updates the configuration for the nct7802 hardware
monitor to correctly configure its temperature sensors.
Signed-off-by: Oskar Senft <osk@google.com>
Link: https://lore.kernel.org/r/20211105032910.446492-1-osk@google.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The PCIe host bridge has two interrupt lines, one that goes towards it
PCIE_INTR2 second level interrupt controller and one for its MSI second
level interrupt controller. The first interrupt line is not currently
managed by the driver, which is why it was not a functional problem.
The interrupt-map property was also only listing the PCI_INTA interrupts
when there are also the INTB, C and D.
Reported-by: Jim Quinlan <jim2101024@gmail.com>
Fixes: d5c8dc0d4c88 ("ARM: dts: bcm2711: Enable PCIe controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The GPIO controller is also an interrupt controller provider and is
currently missing the appropriate 'interrupt-controller' and
'#interrupt-cells' properties to denote that.
Fixes: fb026d3de33b ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The I2C interrupt controller line is off by 32 because the datasheet
describes interrupt inputs into the GIC which are for Shared Peripheral
Interrupts and are starting at offset 32. The ARM GIC binding expects
the SPI interrupts to be numbered from 0 relative to the SPI base.
Fixes: bb097e3e0045 ("ARM: dts: BCM5301X: Add I2C support to the DT")
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
There's a perfectly fine prototype in the asm/setup.h header. Use it.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211110220731.2396491-8-brijesh.singh@amd.com
|
|
Carve it out so that it is abstracted out of the main boot path. All
other encrypted guest-relevant processing should be placed in there.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211110220731.2396491-7-brijesh.singh@amd.com
|
|
Remove all the defines of masks and bit positions for the GHCB MSR
protocol and use comments instead which correspond directly to the spec
so that following those can be a lot easier and straightforward with the
spec opened in parallel to the code.
Aligh vertically while at it.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211110220731.2396491-6-brijesh.singh@amd.com
|
|
Shorten macro names for improved readability.
Suggested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lkml.kernel.org/r/20211110220731.2396491-5-brijesh.singh@amd.com
|
|
Add a call inside memory_failure() to call the arch specific code
to check if the address is an SGX EPC page and handle it.
Note the SGX EPC pages do not have a "struct page" entry, so the hook
goes in at the same point as the device mapping hook.
Pull the call to acquire the mutex earlier so the SGX errors are also
protected.
Make set_mce_nospec() skip SGX pages when trying to adjust
the 1:1 map.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20211026220050.697075-6-tony.luck@intel.com
|
|
Provide a recovery function sgx_memory_failure(). If the poison was
consumed synchronously then send a SIGBUS. Note that the virtual
address of the access is not included with the SIGBUS as is the case
for poison outside of SGX enclaves. This doesn't matter as addresses
of code/data inside an enclave is of little to no use to code executing
outside the (now dead) enclave.
Poison found in a free page results in the page being moved from the
free list to the per-node poison page list.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20211026220050.697075-5-tony.luck@intel.com
|
|
A memory controller patrol scrubber can report poison in a page
that isn't currently being used.
Add "poison" field in the sgx_epc_page that can be set for an
sgx_epc_page. Check for it:
1) When sanitizing dirty pages
2) When freeing epc pages
Poison is a new field separated from flags to avoid having to make all
updates to flags atomic, or integrate poison state changes into some
other locking scheme to protect flags (Currently just sgx_reclaimer_lock
which protects the SGX_EPC_PAGE_RECLAIMER_TRACKED bit in page->flags).
In both cases place the poisoned page on a per-node list of poisoned
epc pages to make sure it will not be reallocated.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20211026220050.697075-4-tony.luck@intel.com
|
|
X86 machine check architecture reports a physical address when there
is a memory error. Handling that error requires a method to determine
whether the physical address reported is in any of the areas reserved
for EPC pages by BIOS.
SGX EPC pages do not have Linux "struct page" associated with them.
Keep track of the mapping from ranges of EPC pages to the sections
that contain them using an xarray. N.B. adds CONFIG_XARRAY_MULTI to
the SGX dependecies. So "select" that in arch/x86/Kconfig for X86/SGX.
Create a function arch_is_platform_page() that simply reports whether an
address is an EPC page for use elsewhere in the kernel. The ACPI error
injection code needs this function and is typically built as a module,
so export it.
Note that arch_is_platform_page() will be slower than other similar
"what type is this page" functions that can simply check bits in the
"struct page". If there is some future performance critical user of
this function it may need to be implemented in a more efficient way.
Note also that the current implementation of xarray allocates a few
hundred kilobytes for this usage on a system with 4GB of SGX EPC memory
configured. This isn't ideal, but worth it for the code simplicity.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20211026220050.697075-3-tony.luck@intel.com
|
|
SGX EPC pages go through the following life cycle:
DIRTY ---> FREE ---> IN-USE --\
^ |
\-----------------/
Recovery action for poison for a DIRTY or FREE page is simple. Just
make sure never to allocate the page. IN-USE pages need some extra
handling.
Add a new flag bit SGX_EPC_PAGE_IS_FREE that is set when a page
is added to a free list and cleared when the page is allocated.
Notes:
1) These transitions are made while holding the node->lock so that
future code that checks the flags while holding the node->lock
can be sure that if the SGX_EPC_PAGE_IS_FREE bit is set, then the
page is on the free list.
2) Initially while the pages are on the dirty list the
SGX_EPC_PAGE_IS_FREE bit is cleared.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20211026220050.697075-2-tony.luck@intel.com
|
|
It's a home router based on BCM4908 SoC. It has: 1 GiB of RAM, 512 MiB
NAND flash, 6 Ethernet ports and 3 x BCM43684 (WiFi). One of Ethernet
ports is "2.5 G Multi-Gig port" that isn't described yet (it isn't known
how it's wired up).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
This describes CRU in a way matching documentation and fixes:
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dt.yaml: cru@100: $nodename:0: 'cru@100' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
From schema: /lib/python3.6/site-packages/dtschema/schemas/simple-bus.yaml
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
replaces the bit-banged i2c-gpio provided i2c functionality
with the hardware in the SoC.
During review of the MR32, Florian Fainelli pointed out that the
SoC has a real I2C-controller. Furthermore, the connected pins
(SDA and SCL) would line up perfectly for use. Back then I couldn't
get it working though and I left it with i2c-gpio (which worked).
Now we know the reason: the interrupt was incorrectly specified.
(Hence, this patch depends on Florian Fainelli's
"ARM: dts: BCM5301X: Fix I2C controller interrupt" patch).
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Define the Realtek RTL8365MB switch without interrupt support on the device
tree of Asus RT-AC88U.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Remove the unnecessary #address-cells & #size-cells in the gpio-keys node
from the device tree of Asus RT-AC88U.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
This patch enables two properties for the QCA8337 switches on the MX65.
Set the SGMII transmit clock to falling edge
"qca,sgmii-txclk-falling-edge" to conform to the OEM configuration [1].
The new explicit PLL enable option "qca,sgmii-enable-pll" is required
[2].
[1] https://git.kernel.org/netdev/net-next/c/6c43809bf1be
[2] https://git.kernel.org/netdev/net-next/c/bbc4799e8bb6
Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-11-15
We've added 72 non-merge commits during the last 13 day(s) which contain
a total of 171 files changed, 2728 insertions(+), 1143 deletions(-).
The main changes are:
1) Add btf_type_tag attributes to bring kernel annotations like __user/__rcu to
BTF such that BPF verifier will be able to detect misuse, from Yonghong Song.
2) Big batch of libbpf improvements including various fixes, future proofing APIs,
and adding a unified, OPTS-based bpf_prog_load() low-level API, from Andrii Nakryiko.
3) Add ingress_ifindex to BPF_SK_LOOKUP program type for selectively applying the
programmable socket lookup logic to packets from a given netdev, from Mark Pashmfouroush.
4) Remove the 128M upper JIT limit for BPF programs on arm64 and add selftest to
ensure exception handling still works, from Russell King and Alan Maguire.
5) Add a new bpf_find_vma() helper for tracing to map an address to the backing
file such as shared library, from Song Liu.
6) Batch of various misc fixes to bpftool, fixing a memory leak in BPF program dump,
updating documentation and bash-completion among others, from Quentin Monnet.
7) Deprecate libbpf bpf_program__get_prog_info_linear() API and migrate its users as
the API is heavily tailored around perf and is non-generic, from Dave Marchevsky.
8) Enable libbpf's strict mode by default in bpftool and add a --legacy option as an
opt-out for more relaxed BPF program requirements, from Stanislav Fomichev.
9) Fix bpftool to use libbpf_get_error() to check for errors, from Hengqi Chen.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (72 commits)
bpftool: Use libbpf_get_error() to check error
bpftool: Fix mixed indentation in documentation
bpftool: Update the lists of names for maps and prog-attach types
bpftool: Fix indent in option lists in the documentation
bpftool: Remove inclusion of utilities.mak from Makefiles
bpftool: Fix memory leak in prog_dump()
selftests/bpf: Fix a tautological-constant-out-of-range-compare compiler warning
selftests/bpf: Fix an unused-but-set-variable compiler warning
bpf: Introduce btf_tracing_ids
bpf: Extend BTF_ID_LIST_GLOBAL with parameter for number of IDs
bpftool: Enable libbpf's strict mode by default
docs/bpf: Update documentation for BTF_KIND_TYPE_TAG support
selftests/bpf: Clarify llvm dependency with btf_tag selftest
selftests/bpf: Add a C test for btf_type_tag
selftests/bpf: Rename progs/tag.c to progs/btf_decl_tag.c
selftests/bpf: Test BTF_KIND_DECL_TAG for deduplication
selftests/bpf: Add BTF_KIND_TYPE_TAG unit tests
selftests/bpf: Test libbpf API function btf__add_type_tag()
bpftool: Support BTF_KIND_TYPE_TAG
libbpf: Support BTF_KIND_TYPE_TAG
...
====================
Link: https://lore.kernel.org/r/20211115162008.25916-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add rudimentary support for the Fairphone 1, based on MT6589 to boot to
UART console.
The recently added SMP support needs to be disabled for this board as
the kernel panics executing /init with it, even though the CPUs seem to
start up fine - maybe a stability issue.
[ 0.072010] smp: Bringing up secondary CPUs ...
[ 0.131888] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.191889] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.251890] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.251982] smp: Brought up 1 node, 4 CPUs
[ 0.254745] SMP: Total of 4 processors activated (7982.28 BogoMIPS).
[ 0.255582] CPU: All CPU(s) started in SVC mode.
[ 0.472039] Run /init as init process
[ 0.473317] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20211024084535.30959-1-luca@z3ntu.xyz
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
Alexander Antonov
Mauro Carvalho Chehab
Cédric Le Goater
Reinette Chatre
Noah Goldstein
Jernej Skrabec
Tiezhu Yang
黄乐
Vasily Gorbik
Sven Schnelle
Masahiro Yamada
Christophe Leroy
Arnd Bergmann
Pingfan Liu
Mark Rutland
Randy Dunlap
Colin Ian King
Wang Haojun
Quan Nguyen
Oskar Senft
Florian Fainelli
Borislav Petkov
Brijesh Singh
Tony Luck
Rafał Miłecki
Christian Lamparter
Arınç ÜNAL
Matthew Hagan
Jakub Kicinski
Luca Weiss