aboutsummaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-11-01powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TESTChristophe Leroy1-1/+1
Until now, all tests involving CONFIG_STRICT_KERNEL_RWX were done with DEBUG_RODATA_TEST to check the result. But now that CONFIG_STRICT_KERNEL_RWX is selected by default, it came without CONFIG_DEBUG_RODATA_TEST and led to the following Oops [ 6.830908] Freeing unused kernel image (initmem) memory: 352K [ 6.840077] BUG: Unable to handle kernel data access on write at 0xc1285200 [ 6.846836] Faulting instruction address: 0xc0004b6c [ 6.851745] Oops: Kernel access of bad area, sig: 11 [#1] [ 6.857075] BE PAGE_SIZE=16K PREEMPT CMPC885 [ 6.861348] SAF3000 DIE NOTIFICATION [ 6.864830] CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0-rc5-s3k-dev-02255-g2747d7b7916f #451 [ 6.873429] NIP: c0004b6c LR: c0004b60 CTR: 00000000 [ 6.878419] REGS: c902be60 TRAP: 0300 Not tainted (5.15.0-rc5-s3k-dev-02255-g2747d7b7916f) [ 6.886852] MSR: 00009032 <EE,ME,IR,DR,RI> CR: 53000335 XER: 8000ff40 [ 6.893564] DAR: c1285200 DSISR: 82000000 [ 6.893564] GPR00: 0c000000 c902bf20 c20f4000 08000000 00000001 04001f00 c1800000 00000035 [ 6.893564] GPR08: ff0001ff c1280000 00000002 c0004b60 00001000 00000000 c0004b1c 00000000 [ 6.893564] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 6.893564] GPR24: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c1060000 [ 6.932034] NIP [c0004b6c] kernel_init+0x50/0x138 [ 6.936682] LR [c0004b60] kernel_init+0x44/0x138 [ 6.941245] Call Trace: [ 6.943653] [c902bf20] [c0004b60] kernel_init+0x44/0x138 (unreliable) [ 6.950022] [c902bf30] [c001122c] ret_from_kernel_thread+0x5c/0x64 [ 6.956135] Instruction dump: [ 6.959060] 48ffc521 48045469 4800d8cd 3d20c086 89295fa0 2c090000 41820058 480796c9 [ 6.966890] 4800e48d 3d20c128 39400002 3fe0c106 <91495200> 3bff8000 4806fa1d 481f7d75 [ 6.974902] ---[ end trace 1e397bacba4aa610 ]--- 0xc1285200 corresponds to 'system_state' global var that the kernel is trying to set to SYSTEM_RUNNING. This var is above the RO/RW limit so it shouldn't Oops. It oopses because the dirty bit is missing. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3d5800b0bbcd7b19761b98f50421358667b45331.1635520232.git.christophe.leroy@csgroup.eu
2021-11-01parisc: Update defconfigsHelge Deller2-16/+14
Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: decompressor: clean up MakefileMasahiro Yamada1-4/+3
Do not list the same objects in 'OBJECTS' and 'targets'. Instead, add $(OBJECTS) to 'targets'. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: decompressor: remove repeated depenency of misc.oMasahiro Yamada1-2/+0
The same dependency $(obj)/misc.o: $(obj)/sizes.h ... appears twice, at line 29 and line 55 in this Makefile. Remove the second one. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: Remove unused constants from asm-offsets.cHelge Deller1-5/+0
Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc/ftrace: use static key to enable/disable function graph tracerSven Schnelle1-3/+6
This avoids using dereference_function_descriptor in the ftrace code path, and it's also faster. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc/ftrace: set function trace functionSven Schnelle1-7/+5
With DYNAMIC_FTRACE, we need to implement ftrace_update_trace_func and not call ftrace_trace_function() directly, as ftrace doesn't expect calls to this function during code patching. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: Make use of the helper macro kthread_run()Cai Huoqing1-3/+1
Replace kthread_create/wake_up_process() with kthread_run() to simplify the code. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: mark xchg functions notraceSven Schnelle1-6/+6
tracing the xchg functions leads to recursion in various places. Therefore mark the function as notrace. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: enhance warning regarding usage of O_NONBLOCKHelge Deller2-4/+7
Instead of showing only the very first application which needs recompile, show all of them, but print them only once. Includes typo fix noticed by Colin Ian King. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
2021-11-01parisc: Drop ifdef __KERNEL__ from non-uapi kernel headersHelge Deller8-31/+0
Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: Use PRIV_USER and PRIV_KERNEL in ptrace.hHelge Deller1-3/+3
Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: Use PRIV_USER in syscall.SHelge Deller1-2/+2
Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc/kgdb: add kgdb_roundup() to make kgdb work with idle pollingSven Schnelle1-2/+17
With idle polling, IPIs are not sent when a CPU idle, but queued and run later from do_idle(). The default kgdb_call_nmi_hook() implementation gets the pointer to struct pt_regs from get_irq_reqs(), which doesn't work in that case because it was not called from the IPI interrupt handler. Fix it by defining our own kgdb_roundup() function which sents an IPI_ENTER_KGDB. When that IPI is received on the target CPU kgdb_nmicallback() is called. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: Move thread_info into task structHelge Deller14-100/+105
This implements the CONFIG_THREAD_INFO_IN_TASK option. With this change: - before thread_info was part of the stack and located at the beginning of the stack - now the thread_info struct is moved and located inside the task_struct structure - the stack is allocated and handled like the major other platforms - drop the cpu field of thread_info and use instead the one in task_struct Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sven Schnelle <svens@stackframe.org>
2021-11-01parisc: add support for TOC (transfer of control)Sven Schnelle6-2/+222
Almost all PA-RISC machines have either a button that is labeled with 'TOC' or a BMC function to trigger a TOC. TOC is a non-maskable interrupt that is sent to the processor. This can be used for diagnostic purposes like obtaining a stack trace/register dump or to enter KDB/KGDB. As an example, on my c8000, TOC can be used with: CONFIG_KGDB=y CONFIG_KGDB_KDB=y and the 'kgdboc=ttyS0,115200' appended to the command line. Press ^[( on serial console, which will enter the BMC command line, and enter 'TOC s': root@(none):/# ( cli>TOC s Sending TOC/INIT. <Cpu3> 2800035d03e00000 0000000040c21ac8 CC_ERR_CHECK_TOC <Cpu0> 2800035d00e00000 0000000040c21ad0 CC_ERR_CHECK_TOC <Cpu2> 2800035d02e00000 0000000040c21ac8 CC_ERR_CHECK_TOC <Cpu1> 2800035d01e00000 0000000040c21ad0 CC_ERR_CHECK_TOC <Cpu3> 37000f7303e00000 2000000000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu0> 37000f7300e00000 2000000000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu2> 37000f7302e00000 2000000000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu1> 37000f7301e00000 2000000000000000 CC_ERR_CPU_CHECK_SUMMARY <Cpu3> 4300100803e00000 c0000000001d26cc CC_MC_BR_TO_OS_TOC <Cpu0> 4300100800e00000 c0000000001d26cc CC_MC_BR_TO_OS_TOC <Cpu2> 4300100802e00000 c0000000001d26cc CC_MC_BR_TO_OS_TOC <Cpu1> 4300100801e00000 c0000000001d26cc CC_MC_BR_TO_OS_TOC Entering kdb (current=0x00000000411cef80, pid 0) on processor 0 due to NonMaskable Interrupt @ 0x40c21ad0 [0]kdb> Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc/firmware: add functions to retrieve TOC dataSven Schnelle2-0/+34
Add functions to retrieve TOC data from firmware both for 1.1 and 2.0 PDC. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: add PIM TOC data structuresSven Schnelle1-0/+22
These data structures describe the TOC data we get from firmware when issuing a PDC_PIM_TOC request. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: move virt_map macro to assembly.hSven Schnelle2-24/+25
This macro will also be used by the TOC code, so move it into asm/assembly.h to avoid duplication. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc/unwind: fix unwinder when CONFIG_64BIT is enabledSven Schnelle1-7/+14
With 64 bit kernels unwind_special() is not working because it compares the pc to the address of the function descriptor. Add a helper function that compares pc with the dereferenced address. This fixes all of the backtraces on my c8000. Without this changes, a lot of backtraces are missing in kdb or the show-all-tasks command from /proc/sysrq-trigger. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-11-01parisc: Fix ptrace check on syscall returnHelge Deller1-1/+1
The TIF_XXX flags are stored in the flags field in the thread_info struct (TI_FLAGS), not in the flags field of the task_struct structure (TASK_FLAGS). It seems this bug didn't generate any important side-effects, otherwise it wouldn't have went unnoticed for 12 years (since v2.6.32). Signed-off-by: Helge Deller <deller@gmx.de> Fixes: ecd3d4bc06e48 ("parisc: stop using task->ptrace for {single,block}step flags") Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: stable@vger.kernel.org
2021-10-31Merge branches 'apple/dart', 'arm/mediatek', 'arm/renesas', 'arm/smmu', 'arm/tegra', 'iommu/fixes', 'x86/amd', 'x86/vt-d' and 'core' into nextJoerg Roedel1-2/+0
2021-10-31Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds6-25/+61
Pull kvm fixes from Paolo Bonzini: - Fixes for s390 interrupt delivery - Fixes for Xen emulator bugs showing up as debug kernel WARNs - Fix another issue with SEV/ES string I/O VMGEXITs * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: Take srcu lock in post_kvm_run_save() KVM: SEV-ES: fix another issue with string I/O VMGEXITs KVM: x86/xen: Fix kvm_xen_has_interrupt() sleeping in kvm_vcpu_block() KVM: x86: switch pvclock_gtod_sync_lock to a raw spinlock KVM: s390: preserve deliverable_mask in __airqs_kick_single_vcpu KVM: s390: clear kicked_mask before sleeping again
2021-10-31Merge tag 'kvm-s390-next-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEADPaolo Bonzini12-77/+200
KVM: s390: Fixes and Features for 5.16 - SIGP Fixes - initial preparations for lazy destroy of secure VMs - storage key improvements/fixes - Log the guest CPNC
2021-10-31RISC-V: KVM: Fix GPA passed to __kvm_riscv_hfence_gvma_xyz() functionsAnup Patel2-4/+5
The parameter passed to HFENCE.GVMA instruction in rs1 register is guest physical address right shifted by 2 (i.e. divided by 4). Unfortunately, we overlooked the semantics of rs1 registers for HFENCE.GVMA instruction and never right shifted guest physical address by 2. This issue did not manifest for hypervisors till now because: 1) Currently, only __kvm_riscv_hfence_gvma_all() and SBI HFENCE calls are used to invalidate TLB. 2) All H-extension implementations (such as QEMU, Spike, Rocket Core FPGA, etc) that we tried till now were conservatively flushing everything upon any HFENCE.GVMA instruction. This patch fixes GPA passed to __kvm_riscv_hfence_gvma_vmid_gpa() and __kvm_riscv_hfence_gvma_gpa() functions. Fixes: fd7bb4a251df ("RISC-V: KVM: Implement VMID allocator") Reported-by: Ian Huang <ihuang@ventanamicro.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Message-Id: <20211026170136.2147619-4-anup.patel@wdc.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-31RISC-V: KVM: Factor-out FP virtualization into separate sourcesAnup Patel5-176/+228
The timer and SBI virtualization is already in separate sources. In future, we will have vector and AIA virtualization also added as separate sources. To align with above described modularity, we factor-out FP virtualization into separate sources. Signed-off-by: Anup Patel <anup.patel@wdc.com> Message-Id: <20211026170136.2147619-3-anup.patel@wdc.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-31Merge tag 'kvmarm-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEADPaolo Bonzini92-782/+1952
KVM/arm64 updates for Linux 5.16 - More progress on the protected VM front, now with the full fixed feature set as well as the limitation of some hypercalls after initialisation. - Cleanup of the RAZ/WI sysreg handling, which was pointlessly complicated - Fixes for the vgic placement in the IPA space, together with a bunch of selftests - More memcg accounting of the memory allocated on behalf of a guest - Timer and vgic selftests - Workarounds for the Apple M1 broken vgic implementation - KConfig cleanups - New kvmarm.mode=none option, for those who really dislike us
2021-10-30parisc: Use PRIV_USER instead of 3 in entry.SHelge Deller1-6/+6
Signed-off-by: Helge Deller <deller@gmx.de>
2021-10-30parisc: Use FRAME_SIZE and FRAME_ALIGN from assembly.hHelge Deller1-7/+1
Signed-off-by: Helge Deller <deller@gmx.de>
2021-10-30parisc: Allocate task struct with stack frame alignmentHelge Deller1-1/+2
We will put the stack directly behind the task struct, so make sure that we allocate it with an alignment of 64 bytes. Signed-off-by: Helge Deller <deller@gmx.de>
2021-10-30parisc: Define FRAME_ALIGN and PRIV_USER/PRIV_KERNEL in assembly.hHelge Deller1-0/+7
Signed-off-by: Helge Deller <deller@gmx.de>
2021-10-30parisc: fix warning in flush_tlb_allSven Schnelle1-2/+2
I've got the following splat after enabling preemption: [ 3.724721] BUG: using __this_cpu_add() in preemptible [00000000] code: swapper/0/1 [ 3.734630] caller is __this_cpu_preempt_check+0x38/0x50 [ 3.740635] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc4-64bit+ #324 [ 3.744605] Hardware name: 9000/785/C8000 [ 3.744605] Backtrace: [ 3.744605] [<00000000401d9d58>] show_stack+0x74/0xb0 [ 3.744605] [<0000000040c27bd4>] dump_stack_lvl+0x10c/0x188 [ 3.744605] [<0000000040c27c84>] dump_stack+0x34/0x48 [ 3.744605] [<0000000040c33438>] check_preemption_disabled+0x178/0x1b0 [ 3.744605] [<0000000040c334f8>] __this_cpu_preempt_check+0x38/0x50 [ 3.744605] [<00000000401d632c>] flush_tlb_all+0x58/0x2e0 [ 3.744605] [<00000000401075c0>] 0x401075c0 [ 3.744605] [<000000004010b8fc>] 0x4010b8fc [ 3.744605] [<00000000401080fc>] 0x401080fc [ 3.744605] [<00000000401d5224>] do_one_initcall+0x128/0x378 [ 3.744605] [<0000000040102de8>] 0x40102de8 [ 3.744605] [<0000000040c33864>] kernel_init+0x60/0x3a8 [ 3.744605] [<00000000401d1020>] ret_from_kernel_thread+0x20/0x28 [ 3.744605] Fix this by moving the __inc_irq_stat() into the locked section. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-10-30parisc: disable preemption in send_IPI_allbutself()Sven Schnelle1-1/+3
Otherwise we might not stop all other CPUs. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-10-30parisc: fix preempt_count() check in entry.SSven Schnelle1-2/+2
preempt_count in struct thread_info is unsigned int, but the entry.S code used LDREG, which generates a 64 bit load when compiled for 64 bit. Fix this to use an ldw and also change the condition in the compare one line below to only compares 32 bits, although ldw zero extends, and that should work with a 64 bit compare. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-10-30parisc: deduplicate code in flush_cache_mm() and flush_cache_range()Sven Schnelle1-51/+30
Parts of both functions are the same, so deduplicate them. No functional change. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-10-30parisc: disable preemption during local tlb flushSven Schnelle1-0/+6
flush_cache_mm() and flush_cache_range() fetch %sr3 via mfsp(). If it matches mm->context, they flush caches and the TLB. However, the TLB is cpu-local, so if the code gets preempted shortly after the mfsp(), and later resumed on another CPU, the wrong TLB is flushed. Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-10-30parisc: Add KFENCE supportHelge Deller3-2/+52
Signed-off-by: Helge Deller <deller@gmx.de>
2021-10-30parisc: Switch to ARCH_STACKWALK implementationHelge Deller2-17/+15
It's shorter and kfence currently depends on this stack unwinding implementation. Signed-off-by: Helge Deller <deller@gmx.de>
2021-10-30parisc: make parisc_acctyp() available outside of faults.cHelge Deller2-1/+2
When adding kfence support, we need to tell kfence_handle_page_fault() if the interrupted assembler statement is a read or write operation. Signed-off-by: Helge Deller <deller@gmx.de>
2021-10-30parisc/unwind: use copy_from_kernel_nofault()Sven Schnelle1-1/+2
I have no idea why get_user() is used there, but we're unwinding the kernel stack, so we should use copy_from_kernel_nofault(). Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
2021-10-30Merge tag 'riscv-for-linus-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds4-13/+11
Pull RISC-V fixes from Palmer Dabbelt: "These are pretty late, but they do fix concrete issues. - ensure the trap vector's address is aligned. - avoid re-populating the KASAN shadow memory. - allow kasan to build without warnings, which have recently become errors" * tag 'riscv-for-linus-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Fix asan-stack clang build riscv: Do not re-populate shadow memory with kasan_populate_early_shadow riscv: fix misalgned trap vector base address
2021-10-30locking: Remove spin_lock_flags() etcArnd Bergmann5-64/+6
parisc, ia64 and powerpc32 are the only remaining architectures that provide custom arch_{spin,read,write}_lock_flags() functions, which are meant to re-enable interrupts while waiting for a spinlock. However, none of these can actually run into this codepath, because it is only called on architectures without CONFIG_GENERIC_LOCKBREAK, or when CONFIG_DEBUG_LOCK_ALLOC is set without CONFIG_LOCKDEP, and none of those combinations are possible on the three architectures. Going back in the git history, it appears that arch/mn10300 may have been able to run into this code path, but there is a good chance that it never worked. On the architectures that still exist, it was already impossible to hit back in 2008 after the introduction of CONFIG_GENERIC_LOCKBREAK, and possibly earlier. As this is all dead code, just remove it and the helper functions built around it. For arch/ia64, the inline asm could be cleaned up, but it seems safer to leave it untouched. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Helge Deller <deller@gmx.de> # parisc Link: https://lore.kernel.org/r/20211022120058.1031690-1-arnd@kernel.org
2021-10-30perf/x86/intel: Fix ICL/SPR INST_RETIRED.PREC_DIST encodingsStephane Eranian2-4/+6
This patch fixes the encoding for INST_RETIRED.PREC_DIST as published by Intel (download.01.org/perfmon/) for Icelake. The official encoding is event code 0x00 umask 0x1, a change from Skylake where it was code 0xc0 umask 0x1. With this patch applied it is possible to run: $ perf record -a -e cpu/event=0x00,umask=0x1/pp ..... Whereas before this would fail. To avoid problems with tools which may use the old code, we maintain the old encoding for Icelake. Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20211014001214.2680534-1-eranian@google.com
2021-10-30ARM: 9151/1: Thumb2: avoid __builtin_thread_pointer() on ClangArd Biesheuvel1-1/+6
If available, we use the __builtin_thread_pointer() helper to get the value of the TLS register, to help the compiler understand that it doesn't need to reload it every time we access 'current'. Unfortunately, Clang fails to emit the MRC system register read directly when building for Thumb2, and instead, it issues a call to the __aeabi_read_tp helper, which the kernel does not provide, and so this result in link failures at build time. So create a special case for this, and emit the MRC directly using an asm() block, just like we do when the helper is not available to begin with. Link: https://github.com/ClangBuiltLinux/linux/issues/1485 Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-10-30ARM: 9150/1: Fix PID_IN_CONTEXTIDR regression when THREAD_INFO_IN_TASK=yArd Biesheuvel2-1/+12
The code that implements the rarely used PID_IN_CONTEXTIDR feature dereferences the 'task' field of struct thread_info directly, and this is no longer possible when THREAD_INFO_IN_TASK=y, as the 'task' field is omitted from the struct definition in that case. Instead, we should just cast the thread_info pointer to a task_struct pointer, given that the former is now the first member of the latter. So use a helper that abstracts this, and provide implementations for both cases. Reported by: Arnd Bergmann <arnd@arndb.de> Fixes: 18ed1c01a7dd ("ARM: smp: Enable THREAD_INFO_IN_TASK") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
2021-10-30Merge tag 'coresight-next-v5.16.v3' of gitolite.kernel.org:pub/scm/linux/kernel/git/coresight/linux into char-misc-nextGreg Kroah-Hartman5-1/+197
Mathieu writes: Coresight changes for v5.16 - A new option to make coresight cpu-debug capabilities available as early as possible in the kernel boot process. - Make trace sessions more enduring by coping with scenarios where events are scheduled on CPUs that can't reach the selected sink. - A set of improvement to make the TMC-ETR driver more efficient. - Enhancements to the TRBE driver to correct several errata. - An enhancement to make the AXI burts size configurable for TMC devices that can't work with the default value. - A fix in the CTI module to use the correct device when calling pm_runtime_put() - The addition of the Kryo-5xx device to the list of support ETMs. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> * tag 'coresight-next-v5.16.v3' of gitolite.kernel.org:pub/scm/linux/kernel/git/coresight/linux: (39 commits) arm64: errata: Enable TRBE workaround for write to out-of-range address arm64: errata: Enable workaround for TRBE overwrite in FILL mode coresight: trbe: Work around write to out of range coresight: trbe: Make sure we have enough space coresight: trbe: Add a helper to determine the minimum buffer size coresight: trbe: Workaround TRBE errata overwrite in FILL mode coresight: trbe: Add infrastructure for Errata handling coresight: trbe: Allow driver to choose a different alignment coresight: trbe: Decouple buffer base from the hardware base coresight: trbe: Add a helper to pad a given buffer area coresight: trbe: Add a helper to calculate the trace generated coresight: trbe: Defer the probe on offline CPUs coresight: trbe: Fix incorrect access of the sink specific data coresight: etm4x: Add ETM PID for Kryo-5XX coresight: trbe: Prohibit trace before disabling TRBE coresight: trbe: End the AUX handle on truncation coresight: trbe: Do not truncate buffer on IRQ coresight: trbe: Fix handling of spurious interrupts coresight: trbe: irq handler: Do not disable TRBE if no action is needed coresight: trbe: Unify the enabling sequence ...
2021-10-29Merge tag 'powerpc-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds1-13/+14
Pull powerpc fixes from Michael Ellerman: "Three commits fixing some issues introduced with the recent IOMMU changes we merged. Thanks to Alexey Kardashevskiy" * tag 'powerpc-5.15-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries/iommu: Create huge DMA window if no MMIO32 is present powerpc/pseries/iommu: Check if the default window in use before removing it powerpc/pseries/iommu: Use correct vfree for it_map
2021-10-29signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)Eric W. Biederman7-8/+8
Now that force_fatal_sig exists it is unnecessary and a bit confusing to use force_sigsegv in cases where the simpler force_fatal_sig is wanted. So change every instance we can to make the code clearer. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Link: https://lkml.kernel.org/r/877de7jrev.fsf@disp2133 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-10-29signal/x86: In emulate_vsyscall force a signal instead of calling do_exitEric W. Biederman1-1/+2
Directly calling do_exit with a signal number has the problem that all of the side effects of the signal don't happen, such as killing all of the threads of a process instead of just the calling thread. So replace do_exit(SIGSYS) with force_fatal_sig(SIGSYS) which causes the signal handling to take it's normal path and work as expected. Cc: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20211020174406.17889-17-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2021-10-29signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sigEric W. Biederman1-2/+2
Modify the 32bit version of setup_rt_frame and setup_frame to act similar to the 64bit version of setup_rt_frame and fail with a signal instead of calling do_exit. Replacing do_exit(SIGILL) with force_fatal_signal(SIGILL) ensures that the process will be terminated cleanly when the stack frame is invalid, instead of just killing off a single thread and leaving the process is a weird state. Cc: David Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Link: https://lkml.kernel.org/r/20211020174406.17889-16-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.