| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Simplify the early exception handling by slicing the gigantic decoding
tree into a more manageable set of functions, similar to what we have
in handle_exit.c.
This will also make the structure reusable for pKVM's own early exit
handling.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20211010145636.1950948-4-tabba@google.com
|
|
hyp-main.c includes switch.h while it only requires adjust-pc.h.
Fix it to remove an unnecessary dependency.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20211010145636.1950948-3-tabba@google.com
|
|
In order to avoid including the whole of the switching helpers
in unrelated files, move the __get_fault_info() and related helpers
into their own include file.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20211010145636.1950948-2-tabba@google.com
|
|
In emit_tail_call() of bpf_jit_comp32.c, "blez t2" (t2 <= 0) is
not consistent with the comment "t2 < 0", update the comment to
keep consistency.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/bpf/1633915150-13220-3-git-send-email-yangtiezhu@loongson.cn
|
|
The config options MIPS_CBPF_JIT and MIPS_EBPF_JIT are useless, remove
them in arch/mips/Kconfig, and then modify arch/mips/net/Makefile.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/bpf/1633915150-13220-2-git-send-email-yangtiezhu@loongson.cn
|
|
* kvm-arm64/raz-sysregs:
: .
: Simplify the handling of RAZ register, removing pointless indirections.
: .
KVM: arm64: Replace get_raz_id_reg() with get_raz_reg()
KVM: arm64: Use get_raz_reg() for userspace reads of PMSWINC_EL0
KVM: arm64: Return early from read_id_reg() if register is RAZ
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Reading a RAZ ID register isn't different from reading any other RAZ
register, so get rid of get_raz_id_reg() and replace it with get_raz_reg(),
which does the same thing, but does it without going through two layers of
indirection.
No functional change.
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211011105840.155815-4-alexandru.elisei@arm.com
|
|
PMSWINC_EL0 is a write-only register and was initially part of the VCPU
register state, but was later removed in commit 7a3ba3095a32 ("KVM:
arm64: Remove PMSWINC_EL0 shadow register"). To prevent regressions, the
register was kept accessible from userspace as Read-As-Zero (RAZ).
The read function that is used to handle userspace reads of this
register is get_raz_id_reg(), which, while technically correct, as it
returns 0, it is not semantically correct, as PMSWINC_EL0 is not an ID
register as the function name suggests.
Add a new function, get_raz_reg(), to use it as the accessor for
PMSWINC_EL0, as to not conflate get_raz_id_reg() to handle other types
of registers.
No functional change intended.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211011105840.155815-3-alexandru.elisei@arm.com
|
|
If read_id_reg() is called for an ID register which is Read-As-Zero (RAZ),
it initializes the return value to zero, then goes through a list of
registers which require special handling before returning the final value.
By not returning as soon as it checks that the register should be RAZ, the
function creates the opportunity for bugs, if, for example, a patch changes
a register to RAZ (like has happened with PMSWINC_EL0 in commit
11663111cd49), but doesn't remove the special handling from read_id_reg();
or if a register is RAZ in certain situations, but readable in others.
Return early to make it impossible for a RAZ register to be anything other
than zero.
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211011105840.155815-2-alexandru.elisei@arm.com
|
|
The SH machine drivers have some ASoC DAI format specifications that use
older defines based on outdated terminology which we're trying to retire,
update to the new bindings.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210915172302.36677-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
gpmc,mux-add-data is not boolean.
Fixes the below errors flagged by dtbs_check.
"ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'"
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
gpmc,cycle2cycle-{same|diff}csen are boolean properties. Fix them
to prevent dtbs_check errors.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
* kvm-arm64/misc-5.16:
: .
: - Allow KVM to be disabled from the command-line
: - Clean up CONFIG_KVM vs CONFIG_HAVE_KVM
: .
KVM: arm64: Depend on HAVE_KVM instead of OF
KVM: arm64: Unconditionally include generic KVM's Kconfig
KVM: arm64: Allow KVM to be disabled from the command line
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Select HAVE_KVM at all times on arm64, as the OF requirement is
always there (even in the case of an ACPI system, we still depend
on some of the OF infrastructure), and won't fo away.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Will Deacon <will@kernel.org>
[maz: Drop the "HAVE_KVM if OF" dependency, as OF is always there on arm64,
new commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210921222231.518092-3-seanjc@google.com
|
|
Unconditionally "source" the generic KVM Kconfig instead of wrapping it
with KVM=y. A future patch will select HAVE_KVM so that referencing
HAVE_KVM in common kernel code doesn't break, and because KVM=y and
HAVE_KVM=n is weird. Source the generic KVM Kconfig unconditionally so
that HAVE_KVM and KVM don't end up with a circular dependency.
Note, all but one of generic KVM's "configs" are of the HAVE_XYZ nature,
and the one outlier correctly takes a dependency on CONFIG_KVM, i.e. the
generic Kconfig is intended to be included unconditionally.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
[maz: made NVHE_EL2_DEBUG depend on KVM]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210921222231.518092-2-seanjc@google.com
|
|
This patch enables microSD card slot connected to SDHI1 on RZ/G2L SMARC
platform.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211010142520.21976-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
RZ/G2L SoM has both 64 GB eMMC and microSD connected to SDHI0.
Both these interfaces are mutually exclusive and the SD0 device
selection is based on the XOR between GPIO_SD0_DEV_SEL and SW1[2]
switch position.
This patch sets GPIO_SD0_DEV_SEL to high in DT. Use the below switch
setting logic for device selection between eMMC and microSD slot
connected to SDHI0.
Set SW1[2] to position 2/OFF for selecting eMMC
Set SW1[2] to position 3/ON for selecting microSD
This patch enables eMMC on RZ/G2L SMARC platform by default.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211010142520.21976-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Although KVM can be compiled out of the kernel, it cannot be disabled
at runtime. Allow this possibility by introducing a new mode that
will prevent KVM from initialising.
This is useful in the (limited) circumstances where you don't want
KVM to be available (what is wrong with you?), or when you want
to install another hypervisor instead (good luck with that).
Reviewed-by: David Brazdil <dbrazdil@google.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Scull <ascull@google.com>
Link: https://lore.kernel.org/r/20211001170553.3062988-1-maz@kernel.org
|
|
* kvm-arm64/vgic-ipa-checks:
: .
: Add extra checks to prevent ther various GIC regions to land
: outside of the IPA space (and tests to verify that it works).
: .
KVM: arm64: selftests: Add init ITS device test
KVM: arm64: selftests: Add test for legacy GICv3 REDIST base partially above IPA range
KVM: arm64: selftests: Add tests for GIC redist/cpuif partially above IPA range
KVM: arm64: selftests: Add some tests for GICv2 in vgic_init
KVM: arm64: selftests: Make vgic_init/vm_gic_create version agnostic
KVM: arm64: selftests: Make vgic_init gic version agnostic
KVM: arm64: vgic: Drop vgic_check_ioaddr()
KVM: arm64: vgic-v3: Check ITS region is not above the VM IPA size
KVM: arm64: vgic-v2: Check cpu interface region is not above the VM IPA size
KVM: arm64: vgic-v3: Check redist region is not above the VM IPA size
kvm: arm64: vgic: Introduce vgic_check_iorange
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
- Enable modular build of the new MCTP networking core protocol,
- Enable modular build of the new NTFS Read-Write file system support
(incl. external compressions lzx/xpress),
- Enable modular build of the MD4 digest algorithm (no longer
auto-selected since commit 42c21973fa3c0f48 ("cifs: create a MD4
module and switch cifs.ko to use it")),
- Move CONFIG_STRING_SELFTEST=m (moved in commit b2ff70a01a7a8083
("lib/test_string.c: move string selftest in the Runtime Testing
menu")).
- Drop CONFIG_TEST_SORT=m (auto-enabled since commit 36f33b562936295a
("lib/test: convert test_sort.c to use KUnit")).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210914073034.3883338-1-geert@linux-m68k.org
|
|
There are no more users of vgic_check_ioaddr(). Move its checks to
vgic_check_iorange() and then remove it.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211005011921.437353-6-ricarkol@google.com
|
|
Verify that the ITS region does not extend beyond the VM-specified IPA
range (phys_size).
base + size > phys_size AND base < phys_size
Add the missing check into vgic_its_set_attr() which is called when
setting the region.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211005011921.437353-5-ricarkol@google.com
|
|
Verify that the GICv2 CPU interface does not extend beyond the
VM-specified IPA range (phys_size).
base + size > phys_size AND base < phys_size
Add the missing check into kvm_vgic_addr() which is called when setting
the region. This patch also enables some superfluous checks for the
distributor (vgic_check_ioaddr was enough as alignment == size for the
distributors).
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211005011921.437353-4-ricarkol@google.com
|
|
Verify that the redistributor regions do not extend beyond the
VM-specified IPA range (phys_size). This can happen when using
KVM_VGIC_V3_ADDR_TYPE_REDIST or KVM_VGIC_V3_ADDR_TYPE_REDIST_REGIONS
with:
base + size > phys_size AND base < phys_size
Add the missing check into vgic_v3_alloc_redist_region() which is called
when setting the regions, and into vgic_v3_check_base() which is called
when attempting the first vcpu-run. The vcpu-run check does not apply to
KVM_VGIC_V3_ADDR_TYPE_REDIST_REGIONS because the regions size is known
before the first vcpu-run. Note that using the REDIST_REGIONS API
results in a different check, which already exists, at first vcpu run:
that the number of redist regions is enough for all vcpus.
Finally, this patch also enables some extra tests in
vgic_v3_alloc_redist_region() by calculating "size" early for the legacy
redist api: like checking that the REDIST region can fit all the already
created vcpus.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211005011921.437353-3-ricarkol@google.com
|
|
Add the new vgic_check_iorange helper that checks that an iorange is
sane: the start address and size have valid alignments, the range is
within the addressable PA range, start+size doesn't overflow, and the
start wasn't already defined.
No functional change.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211005011921.437353-2-ricarkol@google.com
|
|
After pKVM has been 'finalised' using the __pkvm_prot_finalize hypercall,
the calling CPU will have a Stage-2 translation enabled to prevent access
to memory pages owned by EL2.
Although this forms a significant part of the process to deprivilege the
host kernel, we also need to ensure that the hypercall interface is
reduced so that the EL2 code cannot, for example, be re-initialised using
a new set of vectors.
Re-order the hypercalls so that only a suffix remains available after
finalisation of pKVM.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211008135839.1193-7-will@kernel.org
|
|
__pkvm_prot_finalize() completes the deprivilege of the host when pKVM
is in use by installing a stage-2 translation table for the calling CPU.
Issuing the hypercall multiple times for a given CPU makes little sense,
but in such a case just return early with -EPERM rather than go through
the whole page-table dance again.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211008135839.1193-6-will@kernel.org
|
|
If the __pkvm_prot_finalize hypercall returns an error, we WARN but fail
to propagate the failure code back to kvm_arch_init().
Pass a pointer to a zero-initialised return variable so that failure
to finalise the pKVM protections on a host CPU can be reported back to
KVM.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211008135839.1193-5-will@kernel.org
|
|
The stub hypercalls provide mechanisms to reset and replace the EL2 code,
so uninstall them once pKVM has been initialised in order to ensure the
integrity of the hypervisor code.
To ensure pKVM initialisation remains functional, split cpu_hyp_reinit()
into two helper functions to separate usage of the stub from usage of
pkvm hypercalls either side of __pkvm_init on the boot CPU.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211008135839.1193-4-will@kernel.org
|
|
When pKVM is enabled, the hypervisor code at EL2 and its data structures
are inaccessible to the host kernel and cannot be torn down or replaced
as this would defeat the integrity properies which pKVM aims to provide.
Furthermore, the ABI between the host and EL2 is flexible and private to
whatever the current implementation of KVM requires and so booting a new
kernel with an old EL2 component is very likely to end in disaster.
In preparation for uninstalling the hyp stub calls which are relied upon
to reset EL2, disable kexec and hibernation in the host when protected
KVM is enabled.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211008135839.1193-3-will@kernel.org
|
|
__KVM_HOST_SMCCC_FUNC_* is a royal pain, as there is a fair amount
of churn around these #defines, and we avoid making it an enum
only for the sake of the early init, low level code that requires
__KVM_HOST_SMCCC_FUNC___kvm_hyp_init to be usable from assembly.
Let's be brave and turn everything but this symbol into an enum,
using a bit of arithmetic to avoid any overlap.
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/877depq9gw.wl-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20211008135839.1193-2-will@kernel.org
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull powerpc fixes from Michael Ellerman:
"A bit of a big batch, partly because I didn't send any last week, and
also just because the BPF fixes happened to land this week.
Summary:
- Fix a regression hit by the IPR SCSI driver, introduced by the
recent addition of MSI domains on pseries.
- A big series including 8 BPF fixes, some with potential security
impact and the rest various code generation issues.
- Fix our program check assembler entry path, which was accidentally
jumping into a gas macro and generating strange stack frames, which
could confuse find_bug().
- A couple of fixes, and related changes, to fix corner cases in our
machine check handling.
- Fix our DMA IOMMU ops, which were not always returning the optimal
DMA mask, leading to at least one device falling back to 32-bit DMA
when it shouldn't.
- A fix for KUAP handling on 32-bit Book3S.
- Fix crashes seen when kdumping on some pseries systems.
Thanks to Naveen N. Rao, Nicholas Piggin, Alexey Kardashevskiy, Cédric
Le Goater, Christophe Leroy, Mahesh Salgaonkar, Abdul Haleem,
Christoph Hellwig, Johan Almbladh, Stan Johnson"
* tag 'powerpc-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
pseries/eeh: Fix the kdump kernel crash during eeh_pseries_init
powerpc/32s: Fix kuap_kernel_restore()
powerpc/pseries/msi: Add an empty irq_write_msi_msg() handler
powerpc/64s: Fix unrecoverable MCE calling async handler from NMI
powerpc/64/interrupt: Reconcile soft-mask state in NMI and fix false BUG
powerpc/64: warn if local irqs are enabled in NMI or hardirq context
powerpc/traps: do not enable irqs in _exception
powerpc/64s: fix program check interrupt emergency stack path
powerpc/bpf ppc32: Fix BPF_SUB when imm == 0x80000000
powerpc/bpf ppc32: Do not emit zero extend instruction for 64-bit BPF_END
powerpc/bpf ppc32: Fix JMP32_JSET_K
powerpc/bpf ppc32: Fix ALU32 BPF_ARSH operation
powerpc/bpf: Emit stf barrier instruction sequences for BPF_NOSPEC
powerpc/security: Add a helper to query stf_barrier type
powerpc/bpf: Fix BPF_SUB when imm == 0x80000000
powerpc/bpf: Fix BPF_MOD when imm == 1
powerpc/bpf: Validate branch ranges
powerpc/lib: Add helper to check if offset is within conditional branch range
powerpc/iommu: Report the correct most efficient DMA mask for PCI devices
|
|
Pull x86 fixes from Borislav Petkov:
- A FPU fix to properly handle invalid MXCSR values: 32-bit masks them
out due to historical reasons and 64-bit kernels reject them
- A fix to clear X86_FEATURE_SMAP when support for is not
config-enabled
- Three fixes correcting misspelled Kconfig symbols used in code
- Two resctrl object cleanup fixes
- Yet another attempt at fixing the neverending saga of botched x86
timers, this time because some incredibly smart hardware decides to
turn off the HPET timer in a low power state - who cares if the OS is
relying on it...
- Check the full return value range of an SEV VMGEXIT call to determine
whether it returned an error
* tag 'x86_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Restore the masking out of reserved MXCSR bits
x86/Kconfig: Correct reference to MWINCHIP3D
x86/platform/olpc: Correct ifdef symbol to intended CONFIG_OLPC_XO15_SCI
x86/entry: Clear X86_FEATURE_SMAP when CONFIG_X86_SMAP=n
x86/entry: Correct reference to intended CONFIG_64_BIT
x86/resctrl: Fix kfree() of the wrong type in domain_add_cpu()
x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails
x86/hpet: Use another crystalball to evaluate HPET usability
x86/sev: Return an error on a returned non-zero SW_EXITINFO1[31:0]
|
|
Pull RISC-V fixes from Palmer Dabbelt:
- A pair of fixes (along with the necessory cleanup) to our VDSO, to
avoid a locking during OOM and to prevent the text from overflowing
into the data page
- A fix to checksyscalls to teach it about our rv32 UABI
- A fix to add clone3() to the rv32 UABI, which was pointed out by
checksyscalls
- A fix to properly flush the icache on the local CPU in addition to
the remote CPUs
* tag 'riscv-for-linus-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
checksyscalls: Unconditionally ignore fstat{,at}64
riscv: Flush current cpu icache before other cpus
RISC-V: Include clone3() on rv32
riscv/vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
riscv/vdso: Move vdso data page up front
riscv/vdso: Refactor asm/vdso.h
|
|
Some MIPS defconfigs that don't define 'CONFIG_PCI_DRIVERS_GENERIC' but
define 'CONFIG_PCI_DRIVERS_LEGACY' or none of them, can fail when they are
built since definition for 'pci_remap_iospace' is being done in include
file 'arch/mips/include/asm/pci.h' and the specific function implemented
in 'arch/mips/pci/pci-generic.c'. MIPS PCI drivers that don't use generic
PCI core APIs don't really need 'pci_remap_iospace' to be defined at all.
Hence, change definition for 'pci_remap_iospace' to be dependent on the
preprocessor 'CONFIG_PCI_DRIVERS_GENERIC' definition to avoid possible
build problems.
Fixes: 9f76779f2418 ("MIPS: implement architecture-specific 'pci_remap_iospace()'")
CC: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20211008095311.26475-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull s390 fixes from Vasily Gorbik:
- Fix potential memory leak on a error path in eBPF
- Fix handling of zpci device on reserve
* tag 's390-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: fix zpci_zdev_put() on reserve
bpf, s390: Fix potential memory leak about jit_data
|
|
Most of ARCHs use empty ftrace_dyn_arch_init(), introduce a weak common
ftrace_dyn_arch_init() to cleanup them.
Link: https://lkml.kernel.org/r/20210909090216.1955240-1-o451686892@gmail.com
Acked-by: Heiko Carstens <hca@linux.ibm.com> (s390)
Acked-by: Helge Deller <deller@gmx.de> (parisc)
Signed-off-by: Weizhao Ouyang <o451686892@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Stefan Wahren adds devicetree support for the Raspbery Pi Compute Module
4 and its IO board
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Pull xtensa fixes from Max Filippov:
- fix build/boot issues caused by CONFIG_OF vs CONFIC_USE_OF usage
- fix reset handler for xtfpga boards
* tag 'xtensa-20211008' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: xtfpga: Try software restart before simulating CPU reset
xtensa: xtfpga: use CONFIG_USE_OF instead of CONFIG_OF
xtensa: call irqchip_init only when CONFIG_USE_OF is selected
xtensa: use CONFIG_USE_OF instead of CONFIG_OF
|
|
Pull xen fixes from Juergen Gross:
- fix two minor issues in the Xen privcmd driver plus a cleanup patch
for that driver
- fix multiple issues related to running as PVH guest and some related
earlyprintk fixes for other Xen guest types
- fix an issue introduced in 5.15 the Xen balloon driver
* tag 'for-linus-5.15b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: fix cancelled balloon action
xen/x86: adjust data placement
x86/PVH: adjust function/data placement
xen/x86: hook up xen_banner() also for PVH
xen/x86: generalize preferred console model from PV to PVH Dom0
xen/x86: make "earlyprintk=xen" work for HVM/PVH DomU
xen/x86: allow "earlyprintk=xen" to work for PV Dom0
xen/x86: make "earlyprintk=xen" work better for PVH Dom0
xen/x86: allow PVH Dom0 without XEN_PV=y
xen/x86: prevent PVH type from getting clobbered
xen/privcmd: drop "pages" parameter from xen_remap_pfn()
xen/privcmd: fix error handling in mmap-resource processing
xen/privcmd: replace kcalloc() by kvcalloc() when allocating empty pages
|
|
Pull asm-generic fixes from Arnd Bergmann:
"There is one build fix for Arm platforms that ended up impacting most
architectures because of the way the drivers/firmware Kconfig file is
wired up:
The CONFIG_QCOM_SCM dependency have caused a number of randconfig
regressions over time, and some still remain in v5.15-rc4. The fix we
agreed on in the end is to make this symbol selected by any driver
using it, and then building it even for non-Arm platforms with
CONFIG_COMPILE_TEST.
To make this work on all architectures, the drivers/firmware/Kconfig
file needs to be included for all architectures to make the symbol
itself visible.
In a separate discussion, we found that a sound driver patch that is
pending for v5.16 needs the same change to include this Kconfig file,
so the easiest solution seems to have my Kconfig rework included in
v5.15.
Finally, the branch also includes a small unrelated build fix for
NOMMU architectures"
Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/
* tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere
qcom_scm: hide Kconfig symbol
firmware: include drivers/firmware/Kconfig unconditionally
|
|
On SPEAr3xx, ethernet driver is not compatible with the SPEAr600
one.
Indeed, SPEAr3xx uses an earlier version of this IP (v3.40) and
needs some driver tuning compare to SPEAr600.
The v3.40 IP support was added to stmmac driver and this patch
fixes this issue and use the correct compatible string for
SPEAr3xx
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add SDHI{0, 1} nodes to RZ/G2L SoC DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20211007155451.10654-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20211006085836.42155-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add device node for RPC on R8A779A0 SoC.
Signed-off-by: Duc Nguyen <duc.nguyen.ub@renesas.com>
[wsa: rebased]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20211006085836.42155-4-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
This comment likely refers to the obsolete DLPAR workflow where some
resource state transitions were driven more directly from user space
utilities, but it also seems to contradict itself: "Change isolate state to
Isolate [...]" is at odds with the preceding sentences, and it does not
relate at all to the code that follows.
Remove it to prevent confusion.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-5-nathanl@linux.ibm.com
|
|
The core DLPAR code supports two actions (add and remove) and three
subtypes of action:
* By DRC index: the action is attempted on a single specified resource.
This is the usual case for processors.
* By indexed count: the action is attempted on a range of resources
beginning at the specified index. This is implemented only by the memory
DLPAR code.
* By count: the lower layer (CPU or memory) is responsible for locating the
specified number of resources to which the action can be applied.
I cannot find any evidence of the "by count" subtype being used by drmgr or
qemu for processors. And when I try to exercise this code, the add case
does not work:
$ ppc64_cpu --smt ; nproc
SMT=8
24
$ printf "cpu remove count 2" > /sys/kernel/dlpar
$ nproc
8
$ printf "cpu add count 2" > /sys/kernel/dlpar
-bash: printf: write error: Invalid argument
$ dmesg | tail -2
pseries-hotplug-cpu: Failed to find enough CPUs (1 of 2) to add
dlpar: Could not handle DLPAR request "cpu add count 2"
$ nproc
8
$ drmgr -c cpu -a -q 2 # this uses the by-index method
Validating CPU DLPAR capability...yes.
CPU 1
CPU 17
$ nproc
24
This is because find_drc_info_cpus_to_add() does not increment drc_index
appropriately during its search.
This is not hard to fix. But the _by_count() functions also have the
property that they attempt to roll back all prior operations if the entire
request cannot be satisfied, even though the rollback itself can encounter
errors. It's not possible to provide transaction-like behavior at this
level, and it's undesirable to have code that can only pretend to do that.
Any users of these functions cannot know what the state of the system is in
the error case. And the error paths are, to my knowledge, impossible to
test without adding custom error injection code.
Summary:
* This code has not worked reliably since its introduction.
* There is no evidence that it is used.
* It contains questionable rollback behaviors in error paths which are
difficult to test.
So let's remove it.
Fixes: ac71380071d1 ("powerpc/pseries: Add CPU dlpar remove functionality")
Fixes: 90edf184b9b7 ("powerpc/pseries: Add CPU dlpar add functionality")
Fixes: b015f6bc9547 ("powerpc/pseries: Add cpu DLPAR support for drc-info property")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-4-nathanl@linux.ibm.com
|
|
If, due to bugs elsewhere, we get into unregister_cpu_online() with a CPU
that isn't marked hotpluggable, we can emit a warning and return an
appropriate error instead of crashing.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-3-nathanl@linux.ibm.com
|
|
On pseries, cache nodes in the device tree can be added and removed by the
CPU DLPAR code as well as the partition migration (mobility) code. PowerVM
partitions in dedicated processor mode typically have L2 and L3 cache
nodes.
The CPU DLPAR code has the following shortcomings:
* Cache nodes returned as siblings of a new CPU node by
ibm,configure-connector are silently discarded; only the CPU node is
added to the device tree.
* Cache nodes which become unreferenced in the processor removal path are
not removed from the device tree. This can lead to duplicate nodes when
the post-migration device tree update code replaces cache nodes.
This is long-standing behavior. Presumably it has gone mostly unnoticed
because the two bugs have the property of obscuring each other in common
simple scenarios (e.g. remove a CPU and add it back). Likely you'd notice
only if you cared to inspect the device tree or the sysfs cacheinfo
information.
Booted with two processors:
$ pwd
/sys/firmware/devicetree/base/cpus
$ ls -1d */
l2-cache@2010/
l2-cache@2011/
l3-cache@3110/
l3-cache@3111/
PowerPC,POWER9@0/
PowerPC,POWER9@8/
$ lsprop */l2-cache
l2-cache@2010/l2-cache
00003110 (12560)
l2-cache@2011/l2-cache
00003111 (12561)
PowerPC,POWER9@0/l2-cache
00002010 (8208)
PowerPC,POWER9@8/l2-cache
00002011 (8209)
$ ls /sys/devices/system/cpu/cpu0/cache/
index0 index1 index2 index3
After DLPAR-adding PowerPC,POWER9@10, we see that its associated cache
nodes are absent, its threads' L2+L3 cacheinfo is unpopulated, and it is
missing a cache level in its sched domain hierarchy:
$ ls -1d */
l2-cache@2010/
l2-cache@2011/
l3-cache@3110/
l3-cache@3111/
PowerPC,POWER9@0/
PowerPC,POWER9@10/
PowerPC,POWER9@8/
$ lsprop PowerPC\,POWER9@10/l2-cache
PowerPC,POWER9@10/l2-cache
00002012 (8210)
$ ls /sys/devices/system/cpu/cpu16/cache/
index0 index1
$ grep . /sys/kernel/debug/sched/domains/cpu{0,8,16}/domain*/name
/sys/kernel/debug/sched/domains/cpu0/domain0/name:SMT
/sys/kernel/debug/sched/domains/cpu0/domain1/name:CACHE
/sys/kernel/debug/sched/domains/cpu0/domain2/name:DIE
/sys/kernel/debug/sched/domains/cpu8/domain0/name:SMT
/sys/kernel/debug/sched/domains/cpu8/domain1/name:CACHE
/sys/kernel/debug/sched/domains/cpu8/domain2/name:DIE
/sys/kernel/debug/sched/domains/cpu16/domain0/name:SMT
/sys/kernel/debug/sched/domains/cpu16/domain1/name:DIE
When removing PowerPC,POWER9@8, we see that its cache nodes are left
behind:
$ ls -1d */
l2-cache@2010/
l2-cache@2011/
l3-cache@3110/
l3-cache@3111/
PowerPC,POWER9@0/
When DLPAR is combined with VM migration, we can get duplicate nodes. E.g.
removing one processor, then migrating, adding a processor, and then
migrating again can result in warnings from the OF core during
post-migration device tree updates:
Duplicate name in cpus, renamed to "l2-cache@2011#1"
Duplicate name in cpus, renamed to "l3-cache@3111#1"
and nodes with duplicated phandles in the tree, making lookup behavior
unpredictable:
$ lsprop l[23]-cache@*/ibm,phandle
l2-cache@2010/ibm,phandle
00002010 (8208)
l2-cache@2011#1/ibm,phandle
00002011 (8209)
l2-cache@2011/ibm,phandle
00002011 (8209)
l3-cache@3110/ibm,phandle
00003110 (12560)
l3-cache@3111#1/ibm,phandle
00003111 (12561)
l3-cache@3111/ibm,phandle
00003111 (12561)
Address these issues by:
* Correctly processing siblings of the node returned from
dlpar_configure_connector().
* Removing cache nodes in the CPU remove path when it can be determined
that they are not associated with other CPUs or caches.
Use the of_changeset API in both cases, which allows us to keep the error
handling in this code from becoming more complex while ensuring that the
device tree cannot become inconsistent.
Fixes: ac71380071d1 ("powerpc/pseries: Add CPU dlpar remove functionality")
Fixes: 90edf184b9b7 ("powerpc/pseries: Add CPU dlpar add functionality")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210927201933.76786-2-nathanl@linux.ibm.com
|
Marc Zyngier
Tiezhu Yang
Alexandru Elisei
Mark Brown
Roger Quadros
Sean Christopherson
Biju Das
Geert Uytterhoeven
Ricardo Koller
Will Deacon
Greg Kroah-Hartman
Linus Torvalds
Sergio Paracuellos
Weizhao Ouyang
Florian Fainelli
Herve Codina
Wolfram Sang
Duc Nguyen
Nathan Lynch