| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Wire up syscall entry point for x86 arch, for both i386 and x86_64.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210923171111.300673-18-andrealmeid@collabora.com
|
|
The machine check handler is not considered NMI on 64s. The early
handler is the true NMI handler, and then it schedules the
machine_check_exception handler to run when interrupts are enabled.
This works fine except the case of an unrecoverable MCE, where the true
NMI is taken when MSR[RI] is clear, it can not recover, so it calls
machine_check_exception directly so something might be done about it.
Calling an async handler from NMI context can result in irq state and
other things getting corrupted. This can also trigger the BUG at
arch/powerpc/include/asm/interrupt.h:168
BUG_ON(!arch_irq_disabled_regs(regs) && !(regs->msr & MSR_EE));
Fix this by making an _async version of the handler which is called
in the normal case, and a NMI version that is called for unrecoverable
interrupts.
Fixes: 2b43dd7653cc ("powerpc/64: enable MSR[EE] in irq replay pt_regs")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145642.1331214-6-npiggin@gmail.com
|
|
If a NMI hits early in an interrupt handler before the irq soft-mask
state is reconciled, that can cause a false-positive BUG with a
CONFIG_PPC_IRQ_SOFT_MASK_DEBUG assertion.
Remove that assertion and instead check the case that if regs->msr has
EE clear, then regs->softe should be marked as disabled so the irq state
looks correct to NMI handlers, the same as how it's fixed up in the
case it was implicit soft-masked.
This doesn't fix a known problem -- the change that was fixed by commit
4ec5feec1ad02 ("powerpc/64s: Make NMI record implicitly soft-masked code
as irqs disabled") was the addition of a warning in the soft-nmi
watchdog interrupt which can never actually fire when MSR[EE]=0. However
it may be important if NMI handlers grow more code, and it's less
surprising to anything using 'regs' - (I tripped over this when working
in the area).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145642.1331214-5-npiggin@gmail.com
|
|
This can help catch bugs such as the one fixed by the previous change
to prevent _exception() from enabling irqs.
ppc32 could have a similar warning but it has no good config option to
debug this stuff (the test may be overkill to add for production
kernels).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145642.1331214-4-npiggin@gmail.com
|
|
_exception can be called by machine check handlers when the MCE hits
user code (e.g., pseries and powernv). This will enable local irqs
because, which is a dicey thing to do in NMI or hard irq context.
This seemed to worked out okay because a userspace MCE can basically be
treated like a synchronous interrupt (after async / imprecise MCEs are
filtered out). Since NMI and hard irq handlers have started growing
nmi_enter / irq_enter, and more irq state sanity checks, this has
started to cause problems (or at least trigger warnings).
The Fixes tag to the commit which introduced this rather than try to
work out exactly which commit was the first that could possibly cause a
problem because that may be difficult to prove.
Fixes: 9f2f79e3a3c1 ("powerpc: Disable interrupts in 64-bit kernel FP and vector faults")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145642.1331214-3-npiggin@gmail.com
|
|
Emergency stack path was jumping into a 3: label inside the
__GEN_COMMON_BODY macro for the normal path after it had finished,
rather than jumping over it. By a small miracle this is the correct
place to build up a new interrupt frame with the existing stack
pointer, so things basically worked okay with an added weird looking
700 trap frame on top (which had the wrong ->nip so it didn't decode
bug messages either).
Fix this by avoiding using numeric labels when jumping over non-trivial
macros.
Before:
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 88 Comm: sh Not tainted 5.15.0-rc2-00034-ge057cdade6e5 #2637
NIP: 7265677368657265 LR: c00000000006c0c8 CTR: c0000000000097f0
REGS: c0000000fffb3a50 TRAP: 0700 Not tainted
MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 00000700 XER: 20040000
CFAR: c0000000000098b0 IRQMASK: 0
GPR00: c00000000006c964 c0000000fffb3cf0 c000000001513800 0000000000000000
GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299
GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8
GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001
GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8
GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158
GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300
GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80
NIP [7265677368657265] 0x7265677368657265
LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10
Call Trace:
[c0000000fffb3cf0] [c00000000000bdac] soft_nmi_common+0x13c/0x1d0 (unreliable)
--- interrupt: 700 at decrementer_common_virt+0xb8/0x230
NIP: c0000000000098b8 LR: c00000000006c0c8 CTR: c0000000000097f0
REGS: c0000000fffb3d60 TRAP: 0700 Not tainted
MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 22424282 XER: 20040000
CFAR: c0000000000098b0 IRQMASK: 0
GPR00: c00000000006c964 0000000000002400 c000000001513800 0000000000000000
GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299
GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8
GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001
GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8
GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158
GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300
GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80
NIP [c0000000000098b8] decrementer_common_virt+0xb8/0x230
LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10
--- interrupt: 700
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
---[ end trace 6d28218e0cc3c949 ]---
After:
------------[ cut here ]------------
kernel BUG at arch/powerpc/kernel/exceptions-64s.S:491!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 88 Comm: login Not tainted 5.15.0-rc2-00034-ge057cdade6e5-dirty #2638
NIP: c0000000000098b8 LR: c00000000006bf04 CTR: c0000000000097f0
REGS: c0000000fffb3d60 TRAP: 0700 Not tainted
MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 24482227 XER: 00040000
CFAR: c0000000000098b0 IRQMASK: 0
GPR00: c00000000006bf04 0000000000002400 c000000001513800 c000000001271868
GPR04: 00000000100f0d29 0000000042000000 0000000000000007 0000000000000009
GPR08: 00000000100f0d29 0000000024482227 0000000000002710 c000000000181b3c
GPR12: 9000000000009033 c0000000016b0000 00000000100f0d29 c000000005b22f00
GPR16: 00000000ffff0000 0000000000000001 0000000000000009 00000000100eed90
GPR20: 00000000100eed90 0000000010000000 000000001000a49c 00000000100f1430
GPR24: c000000001271868 0000000002000000 0000000000000215 0000000000000300
GPR28: c000000001271800 0000000042000000 00000000100f0d29 c000000080647860
NIP [c0000000000098b8] decrementer_common_virt+0xb8/0x230
LR [c00000000006bf04] ___do_page_fault+0x234/0xb10
Call Trace:
Instruction dump:
4182000c 39400001 48000008 894d0932 714a0001 39400008 408225fc 718a4000
7c2a0b78 3821fcf0 41c20008 e82d0910 <0981fcf0> f92101a0 f9610170 f9810178
---[ end trace a5dbd1f5ea4ccc51 ]---
Fixes: 0a882e28468f4 ("powerpc/64s/exception: remove bad stack branch")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211004145642.1331214-2-npiggin@gmail.com
|
|
Special case handling of the smallest 32-bit negative number for BPF_SUB.
Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7135360a0cdf70adedbccf9863128b8daef18764.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
|
|
Suppress emitting zero extend instruction for 64-bit BPF_END_FROM_[L|B]E
operation.
Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b4e3c3546121315a8e2059b19a1bda84971816e4.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
|
|
'andi' only takes an unsigned 16-bit value. Correct the imm range used
when emitting andi.
Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b94489f52831305ec15aca4dd04a3527236be7e8.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
|
|
Correct the destination register used for ALU32 BPF_ARSH operation.
Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6d24c1f9e79b6f61f5135eaf2ea1e8bcd4dac87b.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
|
|
Emit similar instruction sequences to commit a048a07d7f4535
("powerpc/64s: Add support for a store forwarding barrier at kernel
entry/exit") when encountering BPF_NOSPEC.
Mitigations are enabled depending on what the firmware advertises. In
particular, we do not gate these mitigations based on current settings,
just like in x86. Due to this, we don't need to take any action if
mitigations are enabled or disabled at runtime.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/956570cbc191cd41f8274bed48ee757a86dac62a.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
|
|
Add a helper to return the stf_barrier type for the current processor.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3bd5d7f96ea1547991ac2ce3137dc2b220bae285.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
|
|
We aren't handling subtraction involving an immediate value of
0x80000000 properly. Fix the same.
Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Fold in fix from Naveen to use imm <= 32768]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fc4b1276eb10761fd7ce0814c8dd089da2815251.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
|
|
MTE provides an asymmetric mode for detecting tag exceptions. In
particular, when such a mode is present, the CPU triggers a fault
on a tag mismatch during a load operation and asynchronously updates
a register when a tag mismatch is detected during a store operation.
Add support for MTE asymmetric mode.
Note: If the CPU does not support MTE asymmetric mode the kernel falls
back on synchronous mode which is the default for kasan=on.
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20211006154751.4463-5-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the cpufeature entries to detect the presence of Asymmetric MTE.
Note: The tag checking mode is initialized via cpu_enable_mte() ->
kasan_init_hw_tags() hence to enable it we require asymmetric mode
to be at least on the boot CPU. If the boot CPU does not have it, it is
fine for late CPUs to have it as long as the feature is not enabled
(ARM64_CPUCAP_BOOT_CPU_FEATURE).
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20211006154751.4463-4-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add Asymmetric Memory Tagging Extension bitfield definitions.
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20211006154751.4463-3-vincenzo.frascino@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Only ignore the operation if dividing by 1.
Fixes: 156d0e290e969c ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c674ca18c3046885602caebb326213731c675d06.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
|
|
Add checks to ensure that we never emit branch instructions with
truncated branch offsets.
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/71d33a6b7603ec1013c9734dd8bdd4ff5e929142.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
|
|
Add a helper to check if a given offset is within the branch range for a
powerpc conditional branch instruction, and update some sites to use the
new helper.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/442b69a34ced32ca346a0d9a855f3f6cfdbbbd41.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
|
|
Fixup conflicts.
# Conflicts:
# tools/objtool/check.c
|
|
Export smca_get_bank_type for use in the AMD GPU
driver to determine MCA bank while handling correctable
and uncorrectable errors in GPU UMC.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The size of the exception stacks was increased by the commit in Fixes,
resulting in stack sizes greater than a page in size. The #VC exception
handling was only mapping the first (bottom) page, resulting in an
SEV-ES guest failing to boot.
Make the #VC exception stacks part of the default exception stacks
storage and allocate them with a CONFIG_AMD_MEM_ENCRYPT=y .config. Map
them only when a SEV-ES guest has been detected.
Rip out the custom VC stacks mapping and storage code.
[ bp: Steal and adapt Tom's commit message. ]
Fixes: 7fae4c24a2b8 ("x86: Increase exception stack sizes")
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Brijesh Singh <brijesh.singh@amd.com>
Link: https://lkml.kernel.org/r/YVt1IMjIs7pIZTRR@zn.tnic
|
|
The BPF core defines a __weak bpf_jit_compile() dummy function already
which should only be overridden by JITs if they actually implement a
legacy cBPF JIT. Given arm implements an eBPF JIT, this stub is not
needed.
Now that MIPS cBPF JIT is finally gone, the only JIT left that is still
implementing bpf_jit_compile() is the sparc32 one.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
This patch removes the old 32-bit cBPF and 64-bit eBPF JIT implementations.
They are replaced by a new eBPF implementation that supports both 32-bit
and 64-bit MIPS CPUs.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211005165408.2305108-8-johan.almbladh@anyfinetworks.com
|
|
This patch enables the new eBPF JITs for 32-bit and 64-bit MIPS. It also
disables the old cBPF JIT to so cBPF programs are converted to use the
new JIT.
Workarounds for R4000 CPU errata are not implemented by the JIT, so the
JIT is disabled if any of those workarounds are configured.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211005165408.2305108-7-johan.almbladh@anyfinetworks.com
|
|
This patch adds workarounds for the following CPU errata to the MIPS
eBPF JIT, if enabled in the kernel configuration.
- R10000 ll/sc weak ordering
- Loongson-3 ll/sc weak ordering
- Loongson-2F jump hang
The Loongson-2F nop errata is implemented in uasm, which the JIT uses,
so no additional mitigations are needed for that.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://lore.kernel.org/bpf/20211005165408.2305108-6-johan.almbladh@anyfinetworks.com
|
|
This is an implementation on of an eBPF JIT for 64-bit MIPS III-V and
MIPS64r1-r6. It uses the same framework introduced by the 32-bit JIT.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211005165408.2305108-5-johan.almbladh@anyfinetworks.com
|
|
This is an implementation of an eBPF JIT for 32-bit MIPS I-V and MIPS32.
The implementation supports all 32-bit and 64-bit ALU and JMP operations,
including the recently-added atomics. 64-bit div/mod and 64-bit atomics
are implemented using function calls to math64 and atomic64 functions,
respectively. All 32-bit operations are implemented natively by the JIT,
except if the CPU lacks ll/sc instructions.
Register mapping
================
All 64-bit eBPF registers are mapped to native 32-bit MIPS register pairs,
and does not use any stack scratch space for register swapping. This means
that all eBPF register data is kept in CPU registers all the time, and
this simplifies the register management a lot. It also reduces the JIT's
pressure on temporary registers since we do not have to move data around.
Native register pairs are ordered according to CPU endiannes, following
the O32 calling convention for passing 64-bit arguments and return values.
The eBPF return value, arguments and callee-saved registers are mapped to
their native MIPS equivalents.
Since the 32 highest bits in the eBPF FP (frame pointer) register are
always zero, only one general-purpose register is actually needed for the
mapping. The MIPS fp register is used for this purpose. The high bits are
mapped to MIPS register r0. This saves us one CPU register, which is much
needed for temporaries, while still allowing us to treat the R10 (FP)
register just like any other eBPF register in the JIT.
The MIPS gp (global pointer) and at (assembler temporary) registers are
used as internal temporary registers for constant blinding. CPU registers
t6-t9 are used internally by the JIT when constructing more complex 64-bit
operations. This is precisely what is needed - two registers to store an
operand value, and two more as scratch registers when performing the
operation.
The register mapping is shown below.
R0 - $v1, $v0 return value
R1 - $a1, $a0 argument 1, passed in registers
R2 - $a3, $a2 argument 2, passed in registers
R3 - $t1, $t0 argument 3, passed on stack
R4 - $t3, $t2 argument 4, passed on stack
R5 - $t4, $t3 argument 5, passed on stack
R6 - $s1, $s0 callee-saved
R7 - $s3, $s2 callee-saved
R8 - $s5, $s4 callee-saved
R9 - $s7, $s6 callee-saved
FP - $r0, $fp 32-bit frame pointer
AX - $gp, $at constant-blinding
$t6 - $t9 unallocated, JIT temporaries
Jump offsets
============
The JIT tries to map all conditional JMP operations to MIPS conditional
PC-relative branches. The MIPS branch offset field is 18 bits, in bytes,
which is equivalent to the eBPF 16-bit instruction offset. However, since
the JIT may emit more than one CPU instruction per eBPF instruction, the
field width may overflow. If that happens, the JIT converts the long
conditional jump to a short PC-relative branch with the condition
inverted, jumping over a long unconditional absolute jmp (j).
This conversion will change the instruction offset mapping used for jumps,
and may in turn result in more branch offset overflows. The JIT therefore
dry-runs the translation until no more branches are converted and the
offsets do not change anymore. There is an upper bound on this of course,
and if the JIT hits that limit, the last two iterations are run with all
branches being converted.
Tail call count
===============
The current tail call count is stored in the 16-byte area of the caller's
stack frame that is reserved for the callee in the o32 ABI. The value is
initialized in the prologue, and propagated to the tail-callee by skipping
the initialization instructions when emitting the tail call.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211005165408.2305108-4-johan.almbladh@anyfinetworks.com
|
|
This patch implements a workaround for the Loongson-2F nop in generated,
code, if the existing option CONFIG_CPU_NOP_WORKAROUND is set. Before,
the binutils option -mfix-loongson2f-nop was enabled, but no workaround
was done when emitting MIPS code. Now, the nop pseudo instruction is
emitted as "or ax,ax,zero" instead of the default "sll zero,zero,0". This
is consistent with the workaround implemented by binutils.
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Link: https://sourceware.org/legacy-ml/binutils/2009-11/msg00387.html
Link: https://lore.kernel.org/bpf/20211005165408.2305108-3-johan.almbladh@anyfinetworks.com
|
|
Enable the 'muhu' instruction, complementing the existing 'mulu', needed
to implement a MIPS32 BPF JIT.
Also fix a typo in the existing definition of 'dmulu'.
Signed-off-by: Tony Ambardar <Tony.Ambardar@gmail.com>
Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211005165408.2305108-2-johan.almbladh@anyfinetworks.com
|
|
Add a device tree node for NVDEC on Tegra186, and
device tree nodes for NVDEC and NVDEC1 on Tegra194.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Commit in Fixes intended to exclude the Winchip series and referred to
CONFIG_WINCHIP3D, but the config symbol is called CONFIG_MWINCHIP3D.
Hence, scripts/checkkconfigsymbols.py warns:
WINCHIP3D
Referencing files: arch/x86/Kconfig
Correct the reference to the intended config symbol.
Fixes: 69b8d3fcabdc ("x86/Kconfig: Exclude i586-class CPUs lacking PAE support from the HIGHMEM64G Kconfig group")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210803113531.30720-4-lukas.bulwahn@gmail.com
|
|
The refactoring in the commit in Fixes introduced an ifdef
CONFIG_OLPC_XO1_5_SCI, however the config symbol is actually called
"CONFIG_OLPC_XO15_SCI".
Fortunately, ./scripts/checkkconfigsymbols.py warns:
OLPC_XO1_5_SCI
Referencing files: arch/x86/platform/olpc/olpc.c
Correct this ifdef condition to the intended config symbol.
Fixes: ec9964b48033 ("Platform: OLPC: Move EC-specific functionality out from x86")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210803113531.30720-3-lukas.bulwahn@gmail.com
|
|
Commit
3c73b81a9164 ("x86/entry, selftests: Further improve user entry sanity checks")
added a warning if AC is set when in the kernel.
Commit
662a0221893a3d ("x86/entry: Fix AC assertion")
changed the warning to only fire if the CPU supports SMAP.
However, the warning can still trigger on a machine that supports SMAP
but where it's disabled in the kernel config and when running the
syscall_nt selftest, for example:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 49 at irqentry_enter_from_user_mode
CPU: 0 PID: 49 Comm: init Tainted: G T 5.15.0-rc4+ #98 e6202628ee053b4f310759978284bd8bb0ce6905
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:irqentry_enter_from_user_mode
...
Call Trace:
? irqentry_enter
? exc_general_protection
? asm_exc_general_protection
? asm_exc_general_protectio
IS_ENABLED(CONFIG_X86_SMAP) could be added to the warning condition, but
even this would not be enough in case SMAP is disabled at boot time with
the "nosmap" parameter.
To be consistent with "nosmap" behaviour, clear X86_FEATURE_SMAP when
!CONFIG_X86_SMAP.
Found using entry-fuzz + satrandconfig.
[ bp: Massage commit message. ]
Fixes: 3c73b81a9164 ("x86/entry, selftests: Further improve user entry sanity checks")
Fixes: 662a0221893a ("x86/entry: Fix AC assertion")
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20211003223423.8666-1-vegard.nossum@oracle.com
|
|
Commit in Fixes adds a condition with IS_ENABLED(CONFIG_64_BIT),
but the intended config item is called CONFIG_64BIT, as defined in
arch/x86/Kconfig.
Fortunately, scripts/checkkconfigsymbols.py warns:
64_BIT
Referencing files: arch/x86/include/asm/entry-common.h
Correct the reference to the intended config symbol.
Fixes: 662a0221893a ("x86/entry: Fix AC assertion")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210803113531.30720-2-lukas.bulwahn@gmail.com
|
|
Commit in Fixes separated the architecture specific and filesystem parts
of the resctrl domain structures.
This left the error paths in domain_add_cpu() kfree()ing the memory with
the wrong type.
This will cause a problem if someone adds a new member to struct
rdt_hw_domain meaning d_resctrl is no longer the first member.
Fixes: 792e0f6f789b ("x86/resctrl: Split struct rdt_domain")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/20210917165924.28254-1-james.morse@arm.com
|
|
domain_add_cpu() is called whenever a CPU is brought online. The
earlier call to domain_setup_ctrlval() allocates the control value
arrays.
If domain_setup_mon_state() fails, the control value arrays are not
freed.
Add the missing kfree() calls.
Fixes: 1bd2a63b4f0de ("x86/intel_rdt/mba_sc: Add initialization support")
Fixes: edf6fa1c4a951 ("x86/intel_rdt/cqm: Add RMID (Resource monitoring ID) management")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20210917165958.28313-1-james.morse@arm.com
|
|
Both arch_ptrace_stop_needed and arch_ptrace_stop are called with an
exit_code and a siginfo structure. Neither argument is used by any of
the implementations so just remove the unneeded arguments.
The two arechitectures that implement arch_ptrace_stop are ia64 and
sparc. Both architectures flush their register stacks before a
ptrace_stack so that all of the register information can be accessed
by debuggers.
As the question of if a register stack needs to be flushed is
independent of why ptrace is stopping not needing arguments make sense.
Cc: David Miller <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Link: https://lkml.kernel.org/r/87lf3mx290.fsf@disp2133
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
__send_ipi_mask_ex() uses an optimization: when the target CPU mask is
equal to 'cpu_present_mask' it uses 'HV_GENERIC_SET_ALL' format to avoid
converting the specified cpumask to VP_SET. This case was overlooked when
'exclude_self' parameter was added. As the result, a spurious IPI to
'self' can be send.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Fixes: dfb5c1e12c28 ("x86/hyperv: remove on-stack cpumask from hv_send_ipi_mask_allbutself")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20211006125016.941616-1-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
i.MX fixes for 5.15, round 2:
- A couple of fixes from Haibo Chen to update SPI NOR TX bus width for
i.MX6 and i.MX8 boards. This becomes necessary because spi-nor driver
starts using the setting in DT.
- Mark buck2 always-on for i.MX8MM Kontron-n801x-som board to avoid the
core supply being turned off unexpectedly.
- Fix eSDHC2 device tree settings for LS1028A SoC.
- Disable GIC CPU interface before calling stby-poweroff sequence to fix
power-off failure on i.MX6.
- Fix M2_RST# GPIO pinmux on i.MX8M venice-gw7902 boards.
* tag 'imx-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio
ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
arm64: dts: ls1028a: fix eSDHC2 node
arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2
arm64: dts: imx8: change the spi-nor tx
ARM: dts: imx: change the spi-nor tx
Link: https://lore.kernel.org/r/20211006125734.GA10197@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Instead of unconditionally performing push/pop on %rax/%rdx in case of
division/modulo, we can save a few bytes in case of destination register
being either BPF r0 (%rax) or r3 (%rdx) since the result is written in
there anyway.
Also, we do not need to copy the source to %r11 unless the source is either
%rax, %rdx or an immediate.
For example, before the patch:
22: push %rax
23: push %rdx
24: mov %rsi,%r11
27: xor %edx,%edx
29: div %r11
2c: mov %rax,%r11
2f: pop %rdx
30: pop %rax
31: mov %r11,%rax
After:
22: push %rdx
23: xor %edx,%edx
25: div %rsi
28: pop %rdx
Signed-off-by: Jie Meng <jmeng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211002035626.2041910-1-jmeng@fb.com
|
|
Use get_unaligned() instead of memcpy() to access potentially unaligned
memory, which, when accessed through a pointer, leads to undefined
behavior. get_unaligned() describes much better what is happening there
anyway even if memcpy() does the job.
In addition, since perf tool builds with -Werror, it would fire with:
util/intel-pt-decoder/../../../arch/x86/lib/insn.c: In function '__insn_get_emulate_prefix':
tools/include/../include/asm-generic/unaligned.h:10:15: error: packed attribute is unnecessary [-Werror=packed]
10 | const struct { type x; } __packed *__pptr = (typeof(__pptr))(ptr); \
because -Werror=packed would complain if the packed attribute would have
no effect on the layout of the structure.
In this case, that is intentional so disable the warning only for that
compilation unit.
That part is Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
No functional changes.
Fixes: 5ba1071f7554 ("x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lkml.kernel.org/r/YVSsIkj9Z29TyUjE@zn.tnic
|
|
These are unused and should be handled by drivers/clock/ti nowadays.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
These are unused and should be handled by drivers/clock/ti nowadays.
Note that we also drop some unused SCRM registers that are not clock
related.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
These are unused and should be handled by drivers/clock/ti nowadays.
Note that we also drop some unused SCRM registers that are not clock
related.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
These are unused and should be handled by drivers/clock/ti nowadays.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
These are unused and should be handled by drivers/soc/ti/omap_prm.c
driver nowadays.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
These are unused and should be handled by drivers/soc/ti/omap_prm.c
driver nowadays.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
These are unused and should be handled by drivers/soc/ti/omap_prm.c
driver nowadays.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
These are unused and should be handled by drivers/soc/ti/omap_prm.c
driver nowadays.
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
André Almeida
Nicholas Piggin
Naveen N. Rao
Vincenzo Frascino
Peter Zijlstra
Mukul Joshi
Borislav Petkov
Daniel Borkmann
Johan Almbladh
Tony Ambardar
Mikko Perttunen
Lukas Bulwahn
Vegard Nossum
James Morse
Eric W. Biederman
Vitaly Kuznetsov
Arnd Bergmann
Jie Meng
Tony Lindgren