| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The definition of ioread64 etc is hidden on 32-bit, but the declaration
remained by accident, which led to the generic definition getting left
out:
ERROR: modpost: "ioread64" [drivers/pci/switch/switchtec.ko] undefined!
Hide the declaration and #define under the same #ifdef.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 77bfc8bdb5a1 ("parisc: Remove 64bit access on 32bit machines")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Samsung DTS ARM64 changes for v6.0
1. Add binding headers for several Exynos850 and ExynosAutov9 clocks.
2. ExynosAutov9: Add FSYS clock controller nodes.
3. ExynosAutov9: Document serial compatible (used in DTS).
4. Exynos850: Add Audio, IS, MFC clock controllers. Add IOMMU nodes.
* tag 'samsung-dt64-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
dt-bindings: serial: samsung: add exynosautov9-uart compatible
arm64: dts: exynos: Add SysMMU nodes for Exynos850
arm64: dts: exynos: Add CMU_AUD, CMU_IS and CMU_MFCMSCL for Exynos850
arm64: dts: exynosautov9: add fsys0/1 clock DT nodes
dt-bindings: clock: exynos850: Add Exynos850 CMU_MFCMSCL
dt-bindings: clock: exynos850: Add Exynos850 CMU_IS
dt-bindings: clock: exynos850: Add Exynos850 CMU_AUD
dt-bindings: clock: exynosautov9: add schema for cmu_fsys0/1
dt-bindings: clock: exynosautov9: add fsys1 clock definitions
dt-bindings: clock: exynosautov9: add fys0 clock definitions
dt-bindings: clock: exynosautov9: correct clock numbering of peric0/c1
Link: https://lore.kernel.org/r/20220909150849.820523-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This disables the legacy EEPROM driver, we only need
the new AT24 driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220911214042.1857352-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Drop some not-specified properties, fix phy-supply properties,
fix edp clock on Gru, fix usb port on BPI-R2-Pro, fix license typo,
fix wlan-wake-pin on Gru-Bob and lower the sd-card speed on Quartz64-B
* tag 'v6.0-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-a
arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma
arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10
arm64: dts: rockchip: fix property for usb2 phy supply on rock-3a
arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro
arm64: dts: rockchip: Fix typo in lisense text for PX30.Core
arm64: dts: rockchip: Pull up wlan wake# on Gru-Bob
arm64: dts: rockchip: Lower sd speed on quartz64-b
Link: https://lore.kernel.org/r/2645885.mvXUDI8C0e@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
STM32 DT for v6.1, round 1
Highlights:
----------
- MPU:
- General:
- Add I2C support (5 instances) on STM32MP13.
- Add SPI support (5 instabces) on STM32MP13.
- Add timer interrupts support on STM32MP15.
- ST boards:
- Enable I2C1 and I2C5 on stm32mp135f-dk board.
- Add SPI5 on stm32mp135f-dk board but disabled as only available on
the GPIO expansion connector.
- ARGON:
- Remove spidev node as not used by the code.
* tag 'stm32-dt-for-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: argon: remove spidev node
ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi
ARM: dts: stm32: Fix typo in license text for Engicam boards
ARM: dts: stm32: Add timer interrupts on stm32mp15
ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk
ARM: dts: stm32: add spi nodes into stm32mp131.dtsi
ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts
ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi
Link: https://lore.kernel.org/r/d80afc20-2745-24a2-ab70-a5a03439bd50@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Adapt emac nodes to make them conform to the newly yaml-converted binding.
* tag 'v6.1-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: restyle emac nodes
ARM: dts: rockchip: fix rk3036 emac node compatible string
Link: https://lore.kernel.org/r/4766760.31r3eYUQgx@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
New boards the Anberic RG353P and RG503, Radxa Rock4c+ (variant with
different display outputs), Pine64 Pinephone Pro, Open AI Lab EAIDK-610.
New components of the rk356x (Video encoder/decoder, pcie, CSI dphy).
New board-peripherals for rock3a (pcie, i2c, regulators, rtc), quartz64-b
(pcie, analog audio) and BPI-R2-Pro (pcie), ROCK Pi (leds), Odroid Go (charger)
Usage of the new-ish bclk special handling for audio on rk3399.
* tag 'v6.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits)
arm64: dts: rockchip: use BCLK to GPIO switch on rk3399
arm64: dts: rockchip: Add Hantro encoder node to rk356x
arm64: dts: rockchip: Add VPU support for RK3568/RK3566
arm64: dts: rockchip: Enable PCIe controller on rock3a
arm64: dts: rockchip: add rtc to rock3a
arm64: dts: rockchip: Add PCIe 2 nodes to quartz64-b
arm64: dts: rockchip: add Anbernic RG353P and RG503
dt-bindings: arm: rockchip: Add Anbernic RG353P and RG503
dt-bindings: vendor-prefixes: add Anbernic
arm64: dts: rockchip: Add regulator suffix to BPI-R2-Pro
arm64: dts: rockchip: add LEDs for ROCK 4C+
arm64: dts: rockchip: add LED for ROCK Pi 4A/B/C/A+/B+
arm64: dts: rockchip: add rk817 chg to Odroid Go Advance
arm64: dts: rockchip: Fix SD card controller probe on Pinephone Pro
arm64: dts: rockchip: rk3399: Radxa ROCK 4C+
arm64: dts: rockchip: Add RK3399-T OPP table
dt-bindings: arm: rockchip: Document Radxa ROCK 4C+
arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro
dt-bindings: arm: rockchip: Add PinePhone Pro bindings
arm64: dts: rockchip: Add dts for a rk3399 based board EAIDK-610
...
Link: https://lore.kernel.org/r/5600929.DvuYhMxLoT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
cxl_pmem.ko uses memory_add_physaddr_to_nid() but ia64 does not export it,
so this causes a build error:
ERROR: modpost: "memory_add_physaddr_to_nid" [drivers/cxl/cxl_pmem.ko] undefined!
Fix this by exporting that function.
Fixes: 8c2676a5870a ("hot-add-mem x86_64: memory_add_physaddr_to_nid node fixup")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: linux-ia64@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Keith Mannthey <kmannth@us.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Rename lantiq dts files with soc name being the prefix, so that the
board dts file can be located easily by soc name, and we also gain
the consistency of naming.
This patch is a preparation for the addition of dts for newer SoCs
(Lantiq ARX100, VRX200 and xRX330).
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Remove the repeated word "as" in comments.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Don't use "/**" kernel-doc notation for comments that are not in
kernel-doc format.
Eliminates one warning:
arch/mips/pci/pci-ar2315.c:6: warning: This comment starts with
'/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
* Both AR2315 and AR2316 chips have PCI interface unit, which supports DMA
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The double `it' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Commit 956b200a846e ("spi: spidev: Warn loudly if instantiated from DT
as "spidev"") states that there should not be spidev nodes in DTs.
Remove this non-HW description. There won't be a regression because it
won't bind since 2015 anyhow.
Fixes: 16e3e44c5b87 ("ARM: dts: stm32: Add support for the emtrion emSBC-Argon")
Cc: Reinhold Mueller <reinhold.mueller@emtrion.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Create a separate pinmux for qspi chip select in stm32mp15-pinctrl.dtsi.
In the case we want to use transfer_one() API to communicate with a SPI
device, chip select signal must be driven individually.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Fix the Amarula Solutions typo mistake in license text added in below
commits.
commit <3ff0810ffc479> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
C.TOUCH 2.0 10.1" OF")
commit <6ca2898df59f7> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
C.TOUCH 2.0")
commit <adc0496104b64> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
EDIMM2.2 Starter Kit")
commit <30f9a9da4ee13> ("ARM: dts: stm32: Add Engicam i.Core STM32MP1
SoM")
commit <1d278204cbaa1> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
MicroDev 2.0 7" OF")
commit <f838dae7afd00> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
MicroDev 2.0 board")
commit <0be81dfaeaf89> ("ARM: dts: stm32: Add Engicam MicroGEA STM32MP1
SoM")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
The timer units in the stm32mp15x CPUs have interrupts, depending on the
timer flavour either one "global" or four dedicated ones. Add the irqs
to the timer units on stm32mp15x.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add pinctrl information and a disabled spi5 node within
stm32mp135f-dk.dts in order to use the spi5 bus which is
available via the GPIO expansion pins of the STM32MP135 Discovery board.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add the 5 instances of spi busses supported by the stm32mp131.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Enable the two i2c busses i2c1 and i2c5 available on the
stm32mp135f-dk Discovery board.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Add the 5 instances of i2c busses supported by the stm32mp131.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
imx8mm-tqma8mqml.dtsi has PCIe support, so it should include
<dt-bindings/phy/phy-imx8-pcie.h>.
Otherwise, there are build errors when this SoM dtsi is included
on customers' carrier boards.
While at it, remove the PCI header from imx8mm-tqma8mqml-mba8mx.dts,
which is now unneeded.
Fixes: 1d84283101fc ("arm64: dts: tqma8mqml: add PCIe support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Commit 566e373fe047 ("arm64: Kconfig.platforms: Group NXP platforms
together") introduced a new symbol ARCH_NXP and made ARCH_LAYERSCAPE
(among others) depend on it, but didn't enable it in the defconfig.
Thus, now the defconfig doesn't include support for any NXP
architectures anymore. Fix it.
Fixes: 566e373fe047 ("arm64: Kconfig.platforms: Group NXP platforms together")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Although the RTC is on the module, the RTC_EVENT# signal is connected
on the mainboard. Already set by bootloader, but make it explicit in Linux
as well.
Fixes: 418d1d840e42 ("arm64: dts: freescale: add initial device tree for TQMa8MPQL with i.MX8MP")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Node names should be generic, so change the sdma node name format 'sdma'
into 'dma-controller'.
Acked-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20220818205940.6216-1-wsa+renesas@sang-engineering.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Link: https://lkml.kernel.org/r/20220818205936.6144-1-wsa+renesas@sang-engineering.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
clock_gettime(CLOCK_MONOTONIC, &tp) is very precise on ia64 as it uses ITC
(similar to rdtsc on x86). It's not quite a hrtimer as it is a few times
slower than 1ns. Usually 2-3ns.
clock_getres(CLOCK_MONOTONIC, &res) never reflected that fact and reported
0.04s precision (1/HZ value).
In https://bugs.gentoo.org/596382 gstreamer's test suite failed loudly
when it noticed precision discrepancy.
Before the change:
clock_getres(CLOCK_MONOTONIC, &res) reported 250Hz precision.
After the change:
clock_getres(CLOCK_MONOTONIC, &res) reports ITC (400Mhz) precision.
The patch is based on matoro's fix. I added a bit of explanation why we
need to special-case arch-specific clock_getres().
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20220820181813.2275195-1-slyich@gmail.com
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Cc: matoro <matoro_mailinglist_kernel@matoro.tk>
Cc: Émeric Maschino <emeric.maschino@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Only x86 has own release_thread(), introduce a new weak release_thread()
function to clean empty definitions in other ARCHs.
Link: https://lkml.kernel.org/r/20220819014406.32266-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Guo Ren <guoren@kernel.org> [csky]
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Brian Cain <bcain@quicinc.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Stafford Horne <shorne@gmail.com> [openrisc]
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Huacai Chen <chenhuacai@kernel.org> [LoongArch]
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Chris Zankel <chris@zankel.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Guo Ren <guoren@kernel.org> [csky]
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Xuerui Wang <kernel@xen0n.name>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the
explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT,
DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5.
This was actually not what I had in mind when I suggested making it a
'choice' statement, but it's too late to change again now, and the Kconfig
logic is more sensible in the new form.
Change any defconfig file that had CONFIG_DEBUG_INFO enabled but did not
pick DWARF4 or DWARF5 explicitly to now pick the toolchain default.
Link: https://lkml.kernel.org/r/20220811114609.2097335-1-arnd@kernel.org
Fixes: f9b3cd245784 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When pud-sized hugepages were introduced for s390, the generic version of
follow_huge_pud() was using pte_page() instead of pud_page(). This would
be wrong for s390, see also commit 97534127012f ("mm/hugetlb: use
pmd_page() in follow_huge_pmd()"). Therefore, and probably because not
all archs were supporting pud_page() at that time, a private version of
follow_huge_pud() was added for s390, correctly using pud_page().
Since commit 3a194f3f8ad01 ("mm/hugetlb: make pud_huge() and
follow_huge_pud() aware of non-present pud entry"), the generic version of
follow_huge_pud() is now also using pud_page(), and in general behaves
similar to follow_huge_pmd().
Therefore we can now switch to the generic version and get rid of the
s390-specific follow_huge_pud().
Link: https://lkml.kernel.org/r/20220818135717.609eef8a@thinkpad
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Haiyue Wang <haiyue.wang@intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This Kconfig option is used by individual arch to set its desired
MAX_ORDER. Rename it to reflect its actual use.
Link: https://lkml.kernel.org/r/20220815143959.1511278-1-zi.yan@sent.com
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: Guo Ren <guoren@kernel.org> [csky]
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64]
Acked-by: Huacai Chen <chenhuacai@kernel.org> [LoongArch]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Taichi Sugaya <sugaya.taichi@socionext.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Qin Jian <qinjian@cqplus1.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This idea was introduced by David Rientjes[1].
Introduce a new madvise mode, MADV_COLLAPSE, that allows users to request
a synchronous collapse of memory at their own expense.
The benefits of this approach are:
* CPU is charged to the process that wants to spend the cycles for the
THP
* Avoid unpredictable timing of khugepaged collapse
Semantics
This call is independent of the system-wide THP sysfs settings, but will
fail for memory marked VM_NOHUGEPAGE. If the ranges provided span
multiple VMAs, the semantics of the collapse over each VMA is independent
from the others. This implies a hugepage cannot cross a VMA boundary. If
collapse of a given hugepage-aligned/sized region fails, the operation may
continue to attempt collapsing the remainder of memory specified.
The memory ranges provided must be page-aligned, but are not required to
be hugepage-aligned. If the memory ranges are not hugepage-aligned, the
start/end of the range will be clamped to the first/last hugepage-aligned
address covered by said range. The memory ranges must span at least one
hugepage-sized region.
All non-resident pages covered by the range will first be
swapped/faulted-in, before being internally copied onto a freshly
allocated hugepage. Unmapped pages will have their data directly
initialized to 0 in the new hugepage. However, for every eligible
hugepage aligned/sized region to-be collapsed, at least one page must
currently be backed by memory (a PMD covering the address range must
already exist).
Allocation for the new hugepage may enter direct reclaim and/or
compaction, regardless of VMA flags. When the system has multiple NUMA
nodes, the hugepage will be allocated from the node providing the most
native pages. This operation operates on the current state of the
specified process and makes no persistent changes or guarantees on how
pages will be mapped, constructed, or faulted in the future
Return Value
If all hugepage-sized/aligned regions covered by the provided range were
either successfully collapsed, or were already PMD-mapped THPs, this
operation will be deemed successful. On success, process_madvise(2)
returns the number of bytes advised, and madvise(2) returns 0. Else, -1
is returned and errno is set to indicate the error for the most-recently
attempted hugepage collapse. Note that many failures might have occurred,
since the operation may continue to collapse in the event a single
hugepage-sized/aligned region fails.
ENOMEM Memory allocation failed or VMA not found
EBUSY Memcg charging failed
EAGAIN Required resource temporarily unavailable. Try again
might succeed.
EINVAL Other error: No PMD found, subpage doesn't have Present
bit set, "Special" page no backed by struct page, VMA
incorrectly sized, address not page-aligned, ...
Most notable here is ENOMEM and EBUSY (new to madvise) which are intended
to provide the caller with actionable feedback so they may take an
appropriate fallback measure.
Use Cases
An immediate user of this new functionality are malloc() implementations
that manage memory in hugepage-sized chunks, but sometimes subrelease
memory back to the system in native-sized chunks via MADV_DONTNEED;
zapping the pmd. Later, when the memory is hot, the implementation could
madvise(MADV_COLLAPSE) to re-back the memory by THPs to regain hugepage
coverage and dTLB performance. TCMalloc is such an implementation that
could benefit from this[2].
Only privately-mapped anon memory is supported for now, but additional
support for file, shmem, and HugeTLB high-granularity mappings[2] is
expected. File and tmpfs/shmem support would permit:
* Backing executable text by THPs. Current support provided by
CONFIG_READ_ONLY_THP_FOR_FS may take a long time on a large system which
might impair services from serving at their full rated load after
(re)starting. Tricks like mremap(2)'ing text onto anonymous memory to
immediately realize iTLB performance prevents page sharing and demand
paging, both of which increase steady state memory footprint. With
MADV_COLLAPSE, we get the best of both worlds: Peak upfront performance
and lower RAM footprints.
* Backing guest memory by hugapages after the memory contents have been
migrated in native-page-sized chunks to a new host, in a
userfaultfd-based live-migration stack.
[1] https://lore.kernel.org/linux-mm/d098c392-273a-36a4-1a29-59731cdf5d3d@google.com/
[2] https://github.com/google/tcmalloc/tree/master/tcmalloc
[jrdr.linux@gmail.com: avoid possible memory leak in failure path]
Link: https://lkml.kernel.org/r/20220713024109.62810-1-jrdr.linux@gmail.com
[zokeefe@google.com add missing kfree() to madvise_collapse()]
Link: https://lore.kernel.org/linux-mm/20220713024109.62810-1-jrdr.linux@gmail.com/
Link: https://lkml.kernel.org/r/20220713161851.1879439-1-zokeefe@google.com
[zokeefe@google.com: delay computation of hpage boundaries until use]]
Link: https://lkml.kernel.org/r/20220720140603.1958773-4-zokeefe@google.com
Link: https://lkml.kernel.org/r/20220706235936.2197195-10-zokeefe@google.com
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: "Souptick Joarder (HPE)" <jrdr.linux@gmail.com>
Suggested-by: David Rientjes <rientjes@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Chris Kennelly <ckennelly@google.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rongwei Wang <rongwei.wang@linux.alibaba.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 4867fbbdd6b3 ("x86/mm: move protection_map[] inside the platform")
moved accesses to protection_map[] from mem_encrypt_amd.c to pgprot.c. As
a result, the accesses are now targets of KASAN (and other
instrumentations), leading to the crash during the boot process.
Disable the instrumentations for pgprot.c like commit 67bb8e999e0a
("x86/mm: Disable various instrumentations of mm/mem_encrypt.c and
mm/tlb.c").
Before this patch, my AMD machine cannot boot since v6.0-rc1 with KASAN
enabled, without anything printed. After the change, it successfully
boots up.
Fixes: 4867fbbdd6b3 ("x86/mm: move protection_map[] inside the platform")
Link: https://lkml.kernel.org/r/20220824084726.2174758-1-naohiro.aota@wdc.com
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull arm64 fixes from Will Deacon:
"Three small arm64 fixes, all related to optional architecture
extensions: BTI, SME and 52-bit virtual addressing:
- Disable in-kernel BTI when compiling with GCC, as it makes invalid
assumptions about the distance between functions which has led to
crashes when calling modules on a CPU with BTI support
- Remove bogus TIF_SME flag management if memory allocation fails in
the ptrace code
- Fix the resume path when configured for 52-bit virtual addressing"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: fix resume for 52-bit enabled builds
arm64/ptrace: Don't clear calling process' TIF_SME on OOM
arm64/bti: Disable in kernel BTI when cross section thunks are broken
|
|
Pull MIPS fixes from Thomas Bogendoerfer:
- fix for loongson32 starup hang
- fix for octeon irq setup problem
- fix compiler warning for new CONFIG option
- switch to SPARSEMEM_EXTREME for all platforms selecting SPARSEMEM
* tag 'mips-fixes_6.0_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: Select SPARSEMEM_EXTREME
MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping()
MIPS: octeon: Get rid of preprocessor directives around RESERVE32
MIPS: loongson32: ls1c: Fix hang during startup
|
|
Pull s390 fixes from Vasily Gorbik:
- Fix absolute zero lowcore corruption on kdump when CPU0 is offline
- Fix lowcore protection setup for offline CPU restart
* tag 's390-6.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/smp: enforce lowcore protection on CPU restart
s390/boot: fix absolute zero lowcore corruption on boot
|
|
__cpu_setup() was changed to take the actual number of VA bits in x0,
however the resume path was not updated at the same time.
Load `vabits_actual` in the resume path, to ensure that the correct
number of VA bits is used.
This fixes booting v6.0-rc kernels on my Juno.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Fixes: 0aaa68532e9d ("arm64: mm: fix booting with 52-bit address space")
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220909124311.38489-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This enables the parisc to use <asm-generic/io.h> to fill in the
missing (undefined) [read|write]sq I/O accessor functions.
This is needed if parisc[64] ever wants to uses CONFIG_REGMAP_MMIO
which has been patches to use accelerated _noinc accessors
such as readsq/writesq that parisc64, while being a 64bit platform,
as of now not yet provide.
This comes with the requirement that everything the architecture
already provides needs to be defined, rather than just being,
say, static inline functions.
Bite the bullet and just provide the definitions and make it work.
Compile-tested on parisc32 and parisc64. Drop some of the __raw
functions that now get implemented in <asm-generic/io.h>.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Cc: John David Anglin <dave.anglin@bell.net>
Link: https://lore.kernel.org/linux-arm-kernel/62fcc351.hAyADB%2FY8JTxz+kh%25lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The parisc was using some readq/writeq accessors without special
considerations as to what will happen on 32bit CPUs if you do
this. Maybe we have been lucky that it "just worked" on 32bit
due to the compiler behaviour, or the code paths were never
executed.
Fix the two offending code sites like this:
arch/parisc/lib/iomap.c:
- Put ifdefs around the 64bit accessors and make sure
that ioread64, ioread64be, iowrite64 and iowrite64be
are not available on 32bit builds.
- Also fold in a bug fix where 64bit access was by
mistake using 32bit writel() accessors rather
than 64bit writeq().
drivers/parisc/sba_iommu.c:
- Access any 64bit registers using _lo_hi-semantics by way
of the readq and writeq operations provided by
<linux/io-64-nonatomic-lo-hi.h>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We discoverd that the state of BCLK on, LRCLK off and SD_MODE on
may cause the speaker melting issue. Removing LRCLK while BCLK
is present can cause unexpected output behavior including a large
DC output voltage as described in the Max98357a datasheet.
In order to:
1. prevent BCLK from turning on by other component.
2. keep BCLK and LRCLK being present at the same time
This patch adjusts the device tree to allow BCLK to switch
to GPIO func before LRCLK output, and switch back during
LRCLK is output.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220708080726.4170711-1-judyhsiao@chromium.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The RK3566 and RK3568 come with a dedicated Hantro instance solely for
encoding. This patch adds a node for this to the device tree, along with
a node for its MMU.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20220612155346.16288-4-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
RK356x has Hantro G1 video decoder capable to decode MPEG2/H.264/VP8
video formats.
This patch enables RK356x video decoder in RK356x device-tree
include.
Tested on [1] with FFmpeg v4l2_request code taken from [2]
with MPEG2, H.642 and VP8 samples with results [3].
[1] https://github.com/warpme/minimyth2
[2] https://github.com/LibreELEC/LibreELEC.tv/blob/master/packages/multimedia/ffmpeg/patches/v4l2-request/ffmpeg-001-v4l2-request.patch
[3] https://github.com/warpme/minimyth2/blob/master/video-test-summary.txt
Signed-off-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Link: https://lore.kernel.org/r/20220214212955.1178947-2-piotr.oniszczuk@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add the nodes to enable the PCIe controller on the
Radxa ROCK3 Model A board. Run test with the MT7921
pcie wireless card.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20220726023516.6487-1-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add devicetree node for hym8563 rtc to
Radxa ROCK3 Model A board.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20220726023046.5876-1-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This adds the regulator node to the quartz64-b device tree,
and enables the PCIe 2 controller and combphy for it.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20220718033145.792657-1-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The emac_rockchip.txt file is converted to YAML.
Phy nodes are now a subnode of mdio, so restyle
the emac nodes of rk3036/rk3066/rk3188.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220603163539.537-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Linux kernel has no logic to decide which driver to probe first.
To prevent race conditions remove the rk3036 emac node
fall back compatible string.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220603163539.537-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Pull RISC-V fixes from Palmer Dabbelt:
- A pair of device tree fixes for the Polarfire SOC
- A fix to avoid overflowing the PMU counter array when firmware
incorrectly reports the number of supported counters, which manifests
on OpenSBI versions prior to 1.1
* tag 'riscv-for-linus-6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
perf: RISC-V: fix access beyond allocated array
riscv: dts: microchip: use an mpfs specific l2 compatible
dt-bindings: riscv: sifive-l2: add a PolarFire SoC compatible
|
|
In our environment, it was found that the mitigation BHB has a great
impact on the benchmark performance. For example, in the lmbench test,
the "process fork && exit" test performance drops by 20%.
So it is necessary to have the ability to turn off the mitigation
individually through cmdline, thus avoiding having to compile the
kernel by adjusting the config.
Signed-off-by: Liu Song <liusong@linux.alibaba.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1661514050-22263-1-git-send-email-liusong@linux.alibaba.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
Arnd Bergmann
Linus Walleij
Randy Dunlap
Aleksander Jan Bajkowski
Shaomin Deng
Wolfram Sang
Jason Wang
Patrice Chotard
Jagan Teki
Uwe Kleine-König
Alain Volmat
Fabio Estevam
Michael Walle
Alexander Stein
Joy Zou
Sergei Trofimovich
Kefeng Wang
Gerald Schaefer
Zi Yan
Zach O'Keefe
Naohiro Aota
Linus Torvalds
Joey Gouly
Judy Hsiao
Nicolas Frattaroli
Piotr Oniszczuk
Chukun Pan
Johan Jonker
Liu Song