aboutsummaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2022-09-05arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-aFabio Estevam1-1/+0
The 'enable-active-low' property is not a valid one. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. Remove the invalid 'enable-active-low' property. Fixes: b33a22a1e7c4 ("arm64: dts: rockchip: add basic dts for Pine64 Quartz64-A") Signed-off-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20220827175140.1696699-2-festevam@denx.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-pumaFabio Estevam1-1/+0
The 'enable-active-low' property is not a valid one. Only 'enable-active-high' is valid, and when this property is absent the gpio regulator will act as active low by default. Remove the invalid 'enable-active-low' property. Fixes: 2c66fc34e945 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM") Signed-off-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20220827175140.1696699-1-festevam@denx.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05arm64: dts: rockchip: rk3399: Radxa ROCK 4C+Jagan Teki2-0/+647
Add support for Radxa ROCK 4C+ SBC. Key differences of 4C+ compared to previous ROCK Pi 4. - Rockchip RK3399-T SoC - DP from 4C replaced with micro HDMI 2K@60fps - 4-lane MIPI DSI with 1920*1080 - RK817 Audio codec Also, an official naming convention from Radxa mention to remove Pi from board name, so this 4C+ is named as Radxa ROCK 4C+ not Radxa ROCK Pi 4C+. Signed-off-by: Stephen Chen <stephen@radxa.com> Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20220902065057.97425-3-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05arm64: dts: rockchip: Add RK3399-T OPP tableJagan Teki1-0/+114
RK3399-T is down-clocked version of RK3399 SoC operated at 1.5GHz. Add CPU operating points table for it. Signed-off-by: FUKAUMI Naoki <naoki@radxa.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20220902065057.97425-2-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10Michael Riesch1-1/+1
The property "vbus-supply" was copied from the vendor kernel but is not available in mainstream. Use correct property "phy-supply". Fixes: d6cfb110b0fd ("arm64: dts: rockchip: add usb3 support to rk3568-evb1-v10") Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220905064335.104650-2-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05arm64: dts: rockchip: fix property for usb2 phy supply on rock-3aMichael Riesch1-1/+1
The property "vbus-supply" was copied from the vendor kernel but is not available in mainstream. Use correct property "phy-supply". Fixes: 254a1f6a29e7 ("arm64: dts: rockchip: add usb3 support to the radxa rock3 model a") Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220905064335.104650-1-michael.riesch@wolfvision.net Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2022-09-05powerpc/powermac/udbg_scc: Add missing of_node_put()s in udbg_scc_init()Liang He1-2/+6
During the iteration of for_each_child_of_node(), we need to call of_node_put() for the old references stored in to 'ch_def' and 'ch_a' as their refcounters have been increased in last iteration. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220716074344.540049-1-windhl@126.com
2022-09-05powerpc/powermac/pfunc_base: Add missing of_node_put() in macio_gpio_init_one()Liang He1-0/+2
Call of_node_put() for the reference 'gparent' escaped out of the previous for_each_child_of_node() as it has increased the refcount. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220716073111.539739-1-windhl@126.com
2022-09-05powerpc/powermac/low_i2c: Add missing of_node_put() in kw_i2c_probe()Liang He1-0/+1
Call of_node_put() for the reference 'parent' returned by of_get_parent() which has increased the refcount. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220716070758.539434-1-windhl@126.com
2022-09-05powerpc/powermac/feature: Add missing of_node_put()Liang He1-5/+10
In probe_one_macio(), call of_node_put() for the refernece 'node' escaped out of the for_each_node_by_name() which has increased its refcount. While the 'node' will finally escaped into a global reference, we should still call of_node_put() in fail path which will stop global reference creation. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220716065412.539153-1-windhl@126.com
2022-09-05powerpc/pci-common: Fix refcount bug for 'phb->dn'Liang He1-2/+2
In pcibios_alloc_controller(), 'phb' is allocated and escaped into global 'hose_list'. So we should call of_node_get() when a new reference created into 'phb->dn'. And when phb is freed, we should call of_node_put() on it. NOTE: This function is called in the iteration of for_each_xx in chrp_find_bridges() and pSeries_discover_phbs(). If there is no of_node_get(), the object may be prematurely freed. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220702022936.266146-1-windhl@126.com
2022-09-05powerpc/powernv: Add missing of_node_put()sLiang He6-3/+20
In these driver init functions, there are two kinds of errors: (1) missing of_put_node() for of_find_compatible_node()'s returned pointer (refcount incremented) in fail path or when it is not used anymore. (2) missing of_put_node() for 'for_each_xxx' loop's break Signed-off-by: Liang He <windhl@126.com> [mpe: Use out_put_xxx goto label naming] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220620132553.4073863-1-windhl@126.com
2022-09-05powerpc/fsl_pci: Remove of_node_put() when reference escaped outLiang He1-1/+0
In fsl_pci_assign_primary(), we should remove the of_node_put() when breaking out of the for_each_matching_node() as the 'np' is escaped out by global 'fsl_pci_primary'. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220720124557.1256243-1-windhl@126.com
2022-09-05powerpc/85xx: Add missing of_node_get/put() in ge_imp3a_pci_assign_primary()Liang He1-2/+4
for_each_node_by_type() will automatically increase and decrease the refcount during the iteration. However, there is a reference escaped into global 'fsl_pci_primary' and we need to handle it. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220701140119.245435-1-windhl@126.com
2022-09-05powerpc/44x: Add of_node_put() when break out from for_eachLiang He1-0/+2
In ppc47x_init_irq(), we need to call of_node_put() when there is a break during the iteration of for_each_node_with_property() which will automatically increase and decrease the refcount. Signed-off-by: Liang He <windhl@126.com> [mpe: mpic_alloc() takes its own reference] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220701133126.243102-1-windhl@126.com
2022-09-05powerpc/pci_dn: Add missing of_node_put()Liang He1-0/+1
In pci_add_device_node_info(), use of_node_put() to drop the reference to 'parent' returned by of_get_parent() to keep refcount balance. Fixes: cca87d303c85 ("powerpc/pci: Refactor pci_dn") Co-authored-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com> Link: https://lore.kernel.org/r/20220701131750.240170-1-windhl@126.com
2022-09-05powerpc/pseries: Add missing of_node_put()s in hotplug-cpu.cLiang He1-4/+11
In pseries_cpuhp_cache_use_count() and pseries_cpuhp_detach_nodes(), we need carefully hold the reference returned by of_find_next_cache_node() and use it to call of_node_put() to keep refcount balance. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220621111701.4082889-1-windhl@126.com
2022-09-05powerpc/83xx: Add missing of_node_put() in mpc832x_spi_init()Liang He1-1/+5
In mpc832x_spi_init(), hold the reference returned by of_find_compatible_node() and use it to call of_node_put() for refcount balance. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220621080932.4081935-1-windhl@126.com
2022-09-05powerpc/512x: Add missing of_node_put() in clock-commonclk.cLiang He1-2/+4
In mpc5121_clk_provide_migration_support(), hold the reference returned by of_find_compatible_node() and use it to call of_node_put() for refcount balance. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220621080349.4081689-1-windhl@126.com
2022-09-05powerpc/powermac: Add missing of_node_put() in smp_core99_setup()Liang He1-0/+1
In smp_core99_setup(), add of_node_put() to drop the reference once it's no longer needed. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220620150518.4074910-1-windhl@126.com
2022-09-05powerpc/sysdev/fsl_msi: Add missing of_node_put()Liang He1-0/+2
In fsl_setup_msi_irqs(), use of_node_put() to drop the reference returned by of_parse_phandle(). Fixes: 895d603f945ba ("powerpc/fsl_msi: add support for the fsl, msi property in PCI nodes") Co-authored-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220704145233.278539-1-windhl@126.com
2022-09-05powerpc/sysdev: Add missing of_node_put()sLiang He3-7/+23
Add of_node_put() in various paths to drop references once they are no longer needed. Signed-off-by: Liang He <windhl@126.com> [mpe: Rewrite change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220620130221.4073228-1-windhl@126.com
2022-09-05powerpc/embedded6xx/ls_uart: Add missing of_node_put()Liang He1-0/+2
In ls_uarts_init(), add an of_node_put() to keep refcount balance. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220620065904.4071787-1-windhl@126.com
2022-09-05powerpc/pseries: Add missing of_node_put() in ibmebusLiang He1-1/+5
In ibmebus_match_path(), use of_node_put() to drop the reference returned by of_find_node_by_path() before testing for equality of the pointers. Signed-off-by: Liang He <windhl@126.com> [mpe: Rewrite change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220619074016.4068105-1-windhl@126.com
2022-09-05powerpc/cell: Add missing of_node_put() in iommu.cLiang He1-1/+3
In cell_iommu_init_disabled(), hold the reference returned by of_find_node_by_name() and use it to call of_node_put() for reference balance. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220701144949.252364-2-windhl@126.com
2022-09-05powerpc/cell: Add missing of_node_put()s in cbe_regs.cLiang He1-10/+27
There are several bugs as following: (1) In cbe_get_be_node(), hold the reference returned by of_find_xxx and of_get_xxx OF APIs and use it to call of_node_put(). (2) In cbe_fill_regs_map(), same as above. (3) In cbe_regs_init(), during the iteration of for_each_node_by_type(), the refcount of 'cpu' will be automatically increased and decreased. However, there is a reference escaped out into 'map->cpu_node' and it should be properly handled. Signed-off-by: Liang He <windhl@126.com> [mpe: Drop references before pointer equality test in cbe_get_be_node()] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220701144949.252364-1-windhl@126.com
2022-09-05powerpc/cell: Add missing of_node_put()sLiang He2-0/+4
Use of_node_put() for of_find_node_by_path() and of_find_node_by_phandle() to keep refcount balance. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220619072335.4067728-1-windhl@126.com
2022-09-05powerpc/kernel: Add missing of_node_put() in legacy_serial.cLiang He1-0/+2
In find_legacy_serial_ports(), of_find_node_by_path() will return a node pointer with refcount incremented. The reference should be dropped with of_node_put() when it is not used anymore. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220619070811.4067215-1-windhl@126.com
2022-09-05powerpc/perf: Add missing of_node_put()s in imc-pmu.cLiang He1-2/+8
In update_events_in_group(), of_find_node_by_phandle() will return a node pointer with refcount incremented. The reference should be dropped with of_node_put() in the failure path or when it is not used anymore. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/20220618071353.4059000-1-windhl@126.com
2022-09-05powerpc/embedded6xx: Add missing of_node_put()sLiang He2-0/+9
Add missing of_node_put()s in various paths. Signed-off-by: Liang He <windhl@126.com> [mpe: Rewrite change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220618041042.4058066-1-windhl@126.com
2022-09-05powerpc/8xx: Add missing of_node_put() in tqm8xx_setup.cLiang He1-0/+3
In init_ioports(), of_find_node_by_name() will return a node pointer with refcount incremented. The reference should be dropped with of_node_put() when it is not used anymore. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220618024930.4056825-1-windhl@126.com
2022-09-05powerpc/maple: Add missing of_node_put() in time.cLiang He1-0/+1
In maple_get_boot_time(), of_find_compatible_node() will return a node pointer with refcount incremented. The reference should be dropped with of_node_put() when it is not used anymore. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220617124045.4048757-1-windhl@126.com
2022-09-05powerpc/85xx: Add missing of_node_put() in sgy_cst1000Liang He1-13/+22
In gpio_halt_probe(), of_find_matching_node() will return a node pointer with refcount incremented. The reference should be dropped with of_node_put() in the failure path. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220617105011.4041123-1-windhl@126.com
2022-09-05powerpc/52xx: Add missing of_node_put() in media5200.cLiang He1-0/+3
In media5200_init_irq(), of_find_compatible_node() will return a node pointer with refcount incremented. The reference should be dropped with of_node_put() in the failure path or when it is not used anymore. Don't worry about 'fpga_np == NULL' as of_node_put() can correctly handle that. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220616144007.3987743-1-windhl@126.com
2022-09-05powerpc/85xx: Add missing of_node_put() in ksi8560.cLiang He1-0/+2
In ksi8560_setup_arch(), of_find_compatible_node() will return a node pointer with refcount incremented. The reference should be dropped with of_node_put() when it is not used anymore. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220616132922.3987053-1-windhl@126.com
2022-09-05powerpc/512x: Add missing of_node_put() in mpc5121_clk_init()Liang He1-0/+2
In mpc5121_clk_init(), of_find_compatible_node() will return a node pointer with refcount incremented. The reference should be dropped with of_node_put() when it is not used anymore. Signed-off-by: Liang He <windhl@126.com> [mpe: of_clk_add_provider() will take its own reference.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220615143703.3968898-1-windhl@126.com
2022-09-05powerpc/vdso: link with -z noexecstackChristophe Leroy1-2/+2
With recent binutils, the following warning appears: VDSO32L arch/powerpc/kernel/vdso/vdso32.so.dbg /opt/gcc-12.2.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/12.2.0/../../../../powerpc64-linux/bin/ld: warning: arch/powerpc/kernel/vdso/getcpu-32.o: missing .note.GNU-stack section implies executable stack /opt/gcc-12.2.0-nolibc/powerpc64-linux/bin/../lib/gcc/powerpc64-linux/12.2.0/../../../../powerpc64-linux/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker To avoid that, explicitly tell the linker we don't want executable stack. For more explanations, see commit ffcf9c5700e4 ("x86: link vdso and boot with -z noexecstack --no-warn-rwx-segments") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b95f2e3216a574837dd61208444e9515c3423da4.1662132312.git.christophe.leroy@csgroup.eu
2022-09-05powerpc/math-emu: Remove -w build flag and fix warningsChristophe Leroy3-38/+39
As reported by Nathan, the module_init() macro was not taken into account because the header was missing. That means spe_mathemu_init() was never called. This should have been detected by gcc at build time, but due to '-w' flag it went undetected. Removing that flag leads to many warnings hence errors. Fix those warnings then remove the -w flag. Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/2663961738a46073713786d4efeb53100ca156e7.1662134272.git.christophe.leroy@csgroup.eu
2022-09-05powerpc/math_emu/efp: Include module.hNathan Chancellor1-0/+1
When building with a recent version of clang, there are a couple of errors around the call to module_init(): arch/powerpc/math-emu/math_efp.c:927:1: error: type specifier missing, defaults to 'int'; ISO C99 and later do not support implicit int [-Wimplicit-int] module_init(spe_mathemu_init); ^ int arch/powerpc/math-emu/math_efp.c:927:13: error: a parameter list without types is only allowed in a function definition module_init(spe_mathemu_init); ^ 2 errors generated. module_init() is a macro, which is not getting expanded because module.h is not included in this file. Add the include so that the macro can expand properly, clearing up the build failure. Fixes: ac6f120369ff ("powerpc/85xx: Workaroudn e500 CPU erratum A005") [chleroy: added fixes tag] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/8403854a4c187459b2f4da3537f51227b70b9223.1662134272.git.christophe.leroy@csgroup.eu
2022-09-05arm64: dts: meson: add support for Beelink GT1 UltimateChristian Hewitt2-0/+92
The Beelink GT1 Ultimate is based on the Amlogic S912 (Q200) reference design with the following specifications: - 3GB DDR3 RAM - 32GB eMMC - HDMI 2.1 video - S/PDIF optical output - 10/100/1000 Ethernet - AP6356S Wireless (802.11 a/b/g/n, BT 4.2) - 3x USB 2.0 ports - IR receiver - 1x micro SD card slot - 1x Power LED (white) - 1x Reset button (internal) Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220707093954.21716-2-christianshewitt@gmail.com
2022-09-05Merge 6.0-rc4 into tty-nextGreg Kroah-Hartman139-742/+1112
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05powerpc/pseries: Move dtl scanning and steal time accounting to pseries platformNicholas Piggin5-98/+90
dtl is the PAPR Dispatch Trace Log, which is entirely a pseries feature. The pseries platform alrady has a file dealing with the dtl, so move scanning for stolen time accounting there from kernel/time.c. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220902085316.2071519-5-npiggin@gmail.com
2022-09-05powerpc/64: Remove PPC64 special case for cputime accounting defaultNicholas Piggin2-0/+4
Distro kernels tend to be moving to VIRT_CPU_ACCOUNTING_GEN, and there is not much reason why PPC64 should be special here. Remove the special case and make the ppc64 and pseries defconfigs use GEN accounting (others will use TICK, as-per Kconfig defaults). VIRT_CPU_ACCOUNTING_NATIVE does provide scaled vtime and stolen time apportioned between system and user time, and vtime accounting is not unconditionally enabled, and possibly other things. But it would be better at this point to extend GEN to cover important missing features rather than directing users back to a less used option. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220902085316.2071519-4-npiggin@gmail.com
2022-09-05powerpc/pseries: Implement CONFIG_PARAVIRT_TIME_ACCOUNTINGNicholas Piggin5-0/+52
CONFIG_VIRT_CPU_ACCOUNTING_GEN under pseries does not provide stolen time accounting unless CONFIG_PARAVIRT_TIME_ACCOUNTING is enabled. Implement this using the VPA accumulated wait counters. Note this will not work on current KVM hosts because KVM does not implement the VPA dispatch counters (yet). It could be implemented with the dispatch trace log as it is for VIRT_CPU_ACCOUNTING_NATIVE, but that is not necessary for the more limited accounting provided by PARAVIRT_TIME_ACCOUNTING, and it is more expensive, complex, and has downsides like potential log wrap. From Shrikanth: [...] it was tested on Power10 [PowerVM] Shared LPAR. system has two LPAR. we will call first one LPAR1 and second one as LPAR2. Test was carried out in SMT=1. Similar observation was seen in SMT=8 as well. LPAR config header from each LPAR is below. LPAR1 is twice as big as LPAR2. Since Both are sharing the same underlying hardware, work stealing will happen when both the LPAR's are contending for the same resource. LPAR1: type=Shared mode=Uncapped smt=Off lcpu=40 cpus=40 ent=20.00 LPAR2: type=Shared mode=Uncapped smt=Off lcpu=20 cpus=40 ent=10.00 mpstat was used to check for the utilization. stress-ng has been used as the workload. Few cases are tested. when the both LPAR are idle there is no steal time. when LPAR1 starts running at 100% which consumes all of the physical resource, steal time starts to get accounted. With LPAR1 running at 100% and LPAR2 starts running, steal time starts increasing. This is as expected. When the LPAR2 Load is increased further, steal time increases further. Case 1: 0% LPAR1; 0% LPAR2 %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 0.00 0.00 0.05 0.00 0.00 0.00 0.00 0.00 0.00 99.95 Case 2: 100% LPAR1; 0% LPAR2 %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 97.68 0.00 0.00 0.00 0.00 0.00 2.32 0.00 0.00 0.00 Case 3: 100% LPAR1; 50% LPAR2 %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 86.34 0.00 0.10 0.00 0.00 0.03 13.54 0.00 0.00 0.00 Case 4: 100% LPAR1; 100% LPAR2 %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 78.54 0.00 0.07 0.00 0.00 0.02 21.36 0.00 0.00 0.00 Case 5: 50% LPAR1; 100% LPAR2 %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle 49.37 0.00 0.00 0.00 0.00 0.00 1.17 0.00 0.00 49.47 Patch is accounting for the steal time and basic tests are holding good. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com> [mpe: Add SPDX tag to new paravirt_api_clock.h] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220902085316.2071519-3-npiggin@gmail.com
2022-09-05arm64: dts: imx8ulp: add #reset-cells for pccPeng Fan1-0/+3
The binding file clock/imx8ulp-pcc-clock.yaml indicates '#reset-cells' is a required property, add it. Fixes: fe6291e96313 ("arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp") Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-05arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOsAlexander Stein1-2/+2
They were in wrong order, so fix it by switching them. Fixes: 418d1d840e42 ("arm64: dts: freescale: add initial device tree for TQMa8MPQL with i.MX8MP") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-05ARM: dts: imx6: skov: migrate to resistive-adc-touchOleksij Rempel1-20/+45
Start to use more generic resistive-adc-touch node. ti,tsc2046 is an ADC controller used for resistive touchscreen. So, define it as ADC and attach resistive-adc-touch to it. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-05ARM: dts: imx6sx-udoo-neo: don't use multiple blank linesMarcel Ziswiler1-8/+6
This fixes the following warning: arch/arm/boot/dts/imx6sx-udoo-neo.dtsi:309: check: Please don't use multiple blank lines While at it, use tabs indent for some pinctrl entries. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-05ARM: dts: imx6sl: use tabs for code indentMarcel Ziswiler1-10/+10
This fixes the following error: arch/arm/boot/dts/imx6sl.dtsi:714: error: code indent should use tabs where possible Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-09-05arm64: dts: imx8mn: remove GPU power domain resetMarco Felsch1-1/+0
The PGC (power gating controller) already handles the reset for the GPUMIX power domain. By specifying it within the device tree the reset it issued a 2nd time. This confuses the hardware during power up and sporadically hangs the SoC. Fix this by removing the reset property and let the hardware handle the reset. Fixes: 9a0f3b157e22e ("arm64: dts: imx8mn: Enable GPU") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.