aboutsummaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-07-23signal: Remove the generic __ARCH_SI_TRAPNO supportEric W. Biederman1-2/+0
Now that __ARCH_SI_TRAPNO is no longer set by any architecture remove all of the code it enabled from the kernel. On alpha and sparc a more explict approach of using send_sig_fault_trapno or force_sig_fault_trapno in the very limited circumstances where si_trapno was set to a non-zero value. The generic support that is being removed always set si_trapno on all fault signals. With only SIGILL ILL_ILLTRAP on sparc and SIGFPE and SIGTRAP TRAP_UNK on alpla providing si_trapno values asking all senders of fault signals to provide an si_trapno value does not make sense. Making si_trapno an ordinary extension of the fault siginfo layout has enabled the architecture generic implementation of SIGTRAP TRAP_PERF, and enables other faulting signals to grow architecture generic senders as well. v1: https://lkml.kernel.org/r/m18s4zs7nu.fsf_-_@fess.ebiederm.org v2: https://lkml.kernel.org/r/20210505141101.11519-8-ebiederm@xmission.com Link: https://lkml.kernel.org/r/87bl73xx6x.fsf_-_@disp2133 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-07-23signal/alpha: si_trapno is only used with SIGFPE and SIGTRAP TRAP_UNKEric W. Biederman5-20/+18
While reviewing the signal handlers on alpha it became clear that si_trapno is only set to a non-zero value when sending SIGFPE and when sending SITGRAP with si_code TRAP_UNK. Add send_sig_fault_trapno and send SIGTRAP TRAP_UNK, and SIGFPE with it. Remove the define of __ARCH_SI_TRAPNO and remove the always zero si_trapno parameter from send_sig_fault and force_sig_fault. v1: https://lkml.kernel.org/r/m1eeers7q7.fsf_-_@fess.ebiederm.org v2: https://lkml.kernel.org/r/20210505141101.11519-7-ebiederm@xmission.com Link: https://lkml.kernel.org/r/87h7gvxx7l.fsf_-_@disp2133 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-07-23signal/sparc: si_trapno is only used with SIGILL ILL_ILLTRPEric W. Biederman9-45/+36
While reviewing the signal handlers on sparc it became clear that si_trapno is only set to a non-zero value when sending SIGILL with si_code ILL_ILLTRP. Add force_sig_fault_trapno and send SIGILL ILL_ILLTRP with it. Remove the define of __ARCH_SI_TRAPNO and remove the always zero si_trapno parameter from send_sig_fault and force_sig_fault. v1: https://lkml.kernel.org/r/m1eeers7q7.fsf_-_@fess.ebiederm.org v2: https://lkml.kernel.org/r/20210505141101.11519-7-ebiederm@xmission.com Link: https://lkml.kernel.org/r/87mtqnxx89.fsf_-_@disp2133 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-07-23Merge tag 'char-misc-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds1-1/+1
Pull char/misc fixes from Greg KH: "Here are some small char/misc driver fixes for 5.14-rc3. Included in here are: - MAINTAINERS file updates for two changes in different driver subsystems - mhi bus bugfixes - nds32 bugfix that resolves a reported problem All have been in linux-next with no reported problems" * tag 'char-misc-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nds32: fix up stack guard gap MAINTAINERS: Change ACRN HSM driver maintainer MAINTAINERS: Update for VMCI driver bus: mhi: pci_generic: Fix inbound IPCR channel bus: mhi: core: Validate channel ID when processing command completions bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean
2021-07-23Merge tag 'usb-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds9-14/+14
Pull USB fixes from Greg KH: "Here are some USB fixes for 5.14-rc3 to resolve a bunch of tiny problems reported. Included in here are: - dtsi revert to resolve a problem which broke android systems that relied on the dts name to find the USB controller device. People are still working out the "real" solution for this, but for now the revert is needed. - core USB fix for pipe calculation found by syzbot - typec fixes - gadget driver fixes - new usb-serial device ids - new USB quirks - xhci fixes - usb hub fixes for power management issues reported - other tiny fixes All have been in linux-next with no reported problems" * tag 'usb-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (27 commits) USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick Revert "USB: quirks: ignore remote wake-up on Fibocom L850-GL LTE modem" usb: cdc-wdm: fix build error when CONFIG_WWAN_CORE is not set Revert "arm64: dts: qcom: Harmonize DWC USB3 DT nodes name" usb: dwc2: gadget: Fix sending zero length packet in DDMA mode. usb: dwc2: Skip clock gating on Samsung SoCs usb: renesas_usbhs: Fix superfluous irqs happen after usb_pkt_pop() usb: dwc2: gadget: Fix GOUTNAK flow for Slave mode. usb: phy: Fix page fault from usb_phy_uevent usb: xhci: avoid renesas_usb_fw.mem when it's unusable usb: gadget: u_serial: remove WARN_ON on null port usb: dwc3: avoid NULL access of usb_gadget_driver usb: max-3421: Prevent corruption of freed memory usb: gadget: Fix Unbalanced pm_runtime_enable in tegra_xudc_probe MAINTAINERS: repair reference in USB IP DRIVER FOR HISILICON KIRIN 970 usb: typec: stusb160x: Don't block probing of consumer of "connector" nodes usb: typec: stusb160x: register role switch before interrupt registration USB: usb-storage: Add LaCie Rugged USB3-FW to IGNORE_UAS usb: ehci: Prevent missed ehci interrupts with edge-triggered MSI usb: hub: Disable USB 3 device initiated lpm if exit latency is too high ...
2021-07-23arm64: Add compile-time asserts for siginfo_t offsetsMarco Elver2-0/+74
To help catch ABI breaks at compile-time, add compile-time assertions to verify the siginfo_t layout. Link: https://lkml.kernel.org/r/20210505141101.11519-3-ebiederm@xmission.com Link: https://lkml.kernel.org/r/20210429190734.624918-3-elver@google.com Link: https://lkml.kernel.org/r/87sg0fxx92.fsf_-_@disp2133 Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2021-07-23arm: Add compile-time asserts for siginfo_t offsetsMarco Elver1-0/+37
To help catch ABI breaks at compile-time, add compile-time assertions to verify the siginfo_t layout. This could have caught that we cannot portably add 64-bit integers to siginfo_t on 32-bit architectures like Arm before reaching -next: https://lkml.kernel.org/r/20210422191823.79012-1-elver@google.com Link: https://lkml.kernel.org/r/20210429190734.624918-2-elver@google.com Link: https://lkml.kernel.org/r/20210505141101.11519-2-ebiederm@xmission.com Link: https://lkml.kernel.org/r/87y2a7xx9q.fsf_-_@disp2133 Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2021-07-23sparc64: Add compile-time asserts for siginfo_t offsetsMarco Elver2-0/+69
To help catch ABI breaks at compile-time, add compile-time assertions to verify the siginfo_t layout. Unlike other architectures, sparc64 is special, because it is one of few architectures requiring si_trapno. ABI breaks around that field would only be caught here. Link: https://lkml.kernel.org/r/m11rat9f85.fsf@fess.ebiederm.org Link: https://lkml.kernel.org/r/20210429190734.624918-1-elver@google.com Link: https://lkml.kernel.org/r/20210505141101.11519-1-ebiederm@xmission.com Link: https://lkml.kernel.org/r/874kcvzbuu.fsf_-_@disp2133 Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2021-07-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller57-196/+357
Conflicts are simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23compat: make linux/compat.h available everywhereArnd Bergmann8-79/+27
Parts of linux/compat.h are under an #ifdef, but we end up using more of those over time, moving things around bit by bit. To get it over with once and for all, make all of this file uncondititonal now so it can be accessed everywhere. There are only a few types left that are in asm/compat.h but not yet in the asm-generic version, so add those in the process. This requires providing a few more types in asm-generic/compat.h that were not already there. The only tricky one is compat_sigset_t, which needs a little help on 32-bit architectures and for x86. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-23arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-modePali Rohár1-0/+1
Some SFP modules are not detected when i2c-fast-mode is enabled even when clock-frequency is already set to 100000. The I2C bus violates the timing specifications when run in fast mode. So disable fast mode on Turris Mox. Same change was already applied for uDPU (also Armada 3720 board with SFP) in commit fe3ec631a77d ("arm64: dts: uDPU: remove i2c-fast-mode"). Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-07-23csky: use generic strncpy/strnlen from_userArnd Bergmann3-114/+2
Remove the csky implemenation of strncpy/strnlen and instead use the generic versions. The csky version is fairly slow because it always does byte accesses even for aligned data, and it lacks a checks for user_addr_max(). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-23arc: use generic strncpy/strnlen from_userArnd Bergmann3-90/+7
Remove the arc implemenation of strncpy/strnlen and instead use the generic versions. The arc version is fairly slow because it always does byte accesses even for aligned data, and its checks for user_addr_max() differ from the generic code. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-23hexagon: use generic strncpy/strnlen from_userArnd Bergmann5-159/+5
Remove the hexagon implementation of strncpy/strnlen and instead use the generic version. The hexagon version reads the data twice for strncpy() by doing an extra strnlen(), and it apparently lacks a check for user_addr_max(). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-23h8300: remove stale strncpy_from_userArnd Bergmann3-38/+1
This function is never called because h8300 uses the asm-generic inline function version. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-23asm-generic/uaccess.h: remove __strncpy_from_user/__strnlen_userArnd Bergmann6-29/+51
This is a preparation for changing over architectures to the generic implementation one at a time. As there are no callers of either __strncpy_from_user() or __strnlen_user(), fold these into the strncpy_from_user() and strnlen_user() functions to make each implementation independent of the others. Many of these implementations have known bugs, but the intention here is to not change behavior at all and stay compatible with those bugs for the moment. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-07-23arch/arm64: dts: change 10gbase-kr to 10gbase-r in ArmadaKonstantin Porotchkin6-7/+7
Change all 10G port modes in Armada family device trees from 10gbase-kr to 10gbase-r Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-07-23arm64: dts: add support for Marvell cn9130-crb platformKonstantin Porotchkin4-0/+308
The Marvell reference platform CN9130-CRB is a small form factor board in a metal case. The platform is based on CN9130 SoC with addition of 8 Gigabit ports SOHO Ethernet switch. The reference platform features the following: * Up to 4 CPU cores ARMv8 Cortex-A72 CPU * CPU core operating speed of up to 2.2GHz * DDR4 DIMM – 8GB 64bit+ECC @ 2400Mhz. * 1x eMMC 8GB device * 1x uSD card 4 bits port on CP * 1x 128MB SPI NOR flash memory * 1x USB 3.0 Host port (Type A) * 1x SATA Gen3 via M.2 * 1x USB 3.0 via M.2 * 1x SIM card slot * 1x 1G Ethernet port via RGMII * 1x 10G switch port over SFP+ connector * 8x 1G ports through 88E6393X switch via XFI * 1x 2.5G/1G/100M/10M port via HS_SGMII * 1x PCI Express (PCIe)x1 Gen 3.0 * 1x PCI Express (PCIe)x4 Gen 3.0 via NVMe M.2 * JTAG port The CRB board uses MCP23017 i2c pin controller that drives the onboard eMMC abd USB 3,0 port power lines. The following configuration should be enabled for this controller support: CONFIG_PINCTRL_MCP23S08=y The plaform supports two HW configurations - "A" and "B" CN9130-CRB-A * AP-MPP configuration: SDIO, UART * CP0 Serdes configuration: * Lane0-3: NVMe (PCIe x4) * Lane4: XFI * Lane5: HS_SGMII 2. CN9130-CRB-B * AP-MPP configuration: SDIO, UART * CP0-MPP configuration: RGMII, SDIO, I2C0, I2C1, SMI, XSMI * CP0 Serdes configuration: * Lane0: PCIe x1 * Lane1: USB3_0 x1 * Lane2: SATA x1 * Lane3: USB3_1 x1 * Lane4: XFI * Lane5: HS_SGMII Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-07-23dts: marvell: Enable 10G interfaces on 9130-DB and 9131-DB boardsStefan Chulski2-2/+2
This patch enables eth0 10G interface on CN9130-DB paltforms and eth0 10G and eth3 10G interfaces on CN9131-DB. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-07-23arm64: dts: cn913x: add device trees for topology B boardsKonstantin Porotchkin10-800/+930
The CN913x DB with topology B is similar to a regular setup (A) boards, but uses NAND flash as a boot device, while topology A boards are booting from SPI flash. Since NAND and SPI on CN913x DB boards share some wires, they cannot be activated simultaneously. The DTS files for setup "B" are based on setup "A", in which the CP0 NAND controller enabled and CP0 SPI1 disabled. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-07-23arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllersVladimir Oltean1-0/+2
Since drivers/mmc/host/sdhci-xenon.c declares the PROBE_PREFER_ASYNCHRONOUS probe type, it is not guaranteed whether /dev/mmcblk0 will belong to sdhci0 or sdhci1. In turn, this will break booting by: root=/dev/mmcblk0p1 Fix the issue by adding aliases so that the old MMC controller indices are preserved. Fixes: 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2021-07-23ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pinsMarek Vasut1-2/+2
The pinctrl_power_button/pinctrl_power_out each define single GPIO pinmux, except it is exactly the other one than the matching gpio-keys and gpio-poweroff DT nodes use for that functionality. Swap the two GPIOs to correct this error. Fixes: 50d29fdb765d ("ARM: dts: imx53: Add power GPIOs on M53Menlo") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_initColin Ian King1-1/+1
The function imx_mmdc_perf_init recently had a 3rd argument added to it but the equivalent macro was not updated and is still the older 2 argument version. Fix this by adding in the missing 3rd argumement mmdc_ipg_clk. Fixes: f07ec8536580 ("ARM: imx: add missing clk_disable_unprepare()") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23MIPS/asm/printk: Fix build failure caused by printkPetr Mladek1-1/+1
The commit 337015573718b161 ("printk: Userspace format indexing support") caused the following build failure: arch/mips/kernel/genex.o: In function `handle_mcheck_int': (.text+0x190c): undefined reference to `printk' arch/mips/kernel/genex.o: In function `handle_reserved_int': (.text+0x1c8c): undefined reference to `printk' Fixes: 337015573718b161 ("printk: Userspace format indexing support") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Suggested-by: Chris Down <chris@chrisdown.name> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/YPbBfdz9srIpI+bb@chrisdown.name
2021-07-23crypto: x86/aes-ni - add missing error checks in XTS codeArd Biesheuvel1-0/+5
The updated XTS code fails to check the return code of skcipher_walk_virt, which may lead to skcipher_walk_abort() or skcipher_walk_done() being called while the walk argument is in an inconsistent state. So check the return value after each such call, and bail on errors. Fixes: 2481104fe98d ("crypto: x86/aes-ni-xts - rewrite and drop indirections via glue helper") Reported-by: Dave Hansen <dave.hansen@intel.com> Reported-by: syzbot <syzbot+5d1bad8042a8f0e8117a@syzkaller.appspotmail.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-07-23ARM: dts: imx6q-dhcom: Set minimum memory size of all DHCOM i.MX6 variantsChristoph Niedermaier1-1/+1
The minimum available memory size of all DHCOM i.MX6 variants is 512 MB. Set this value for the memory node. If U-Boot fails to fill the memory size, at least all DHCOM i.MX6 variants should run without problems. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23ARM: dts: imx6q-dhcom: Remove ddc-i2c-bus propertyChristoph Niedermaier1-1/+0
An EDID lookup is not needed with this panel. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM stateNicholas Piggin1-0/+20
The H_ENTER_NESTED hypercall is handled by the L0, and it is a request by the L1 to switch the context of the vCPU over to that of its L2 guest, and return with an interrupt indication. The L1 is responsible for switching some registers to guest context, and the L0 switches others (including all the hypervisor privileged state). If the L2 MSR has TM active, then the L1 is responsible for recheckpointing the L2 TM state. Then the L1 exits to L0 via the H_ENTER_NESTED hcall, and the L0 saves the TM state as part of the exit, and then it recheckpoints the TM state as part of the nested entry and finally HRFIDs into the L2 with TM active MSR. Not efficient, but about the simplest approach for something that's horrendously complicated. Problems arise if the L1 exits to the L0 with a TM state which does not match the L2 TM state being requested. For example if the L1 is transactional but the L2 MSR is non-transactional, or vice versa. The L0's HRFID can take a TM Bad Thing interrupt and crash. Fix this by disallowing H_ENTER_NESTED in TM[T] state entirely, and then ensuring that if the L1 is suspended then the L2 must have TM active, and if the L1 is not suspended then the L2 must not have TM active. Fixes: 360cae313702 ("KVM: PPC: Book3S HV: Nested guest entry via hypercall") Cc: stable@vger.kernel.org # v4.20+ Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2021-07-23KVM: PPC: Book3S: Fix H_RTAS rets buffer overflowNicholas Piggin1-3/+22
The kvmppc_rtas_hcall() sets the host rtas_args.rets pointer based on the rtas_args.nargs that was provided by the guest. That guest nargs value is not range checked, so the guest can cause the host rets pointer to be pointed outside the args array. The individual rtas function handlers check the nargs and nrets values to ensure they are correct, but if they are not, the handlers store a -3 (0xfffffffd) failure indication in rets[0] which corrupts host memory. Fix this by testing up front whether the guest supplied nargs and nret would exceed the array size, and fail the hcall directly without storing a failure indication to rets[0]. Also expand on a comment about why we kill the guest and try not to return errors directly if we have a valid rets[0] pointer. Fixes: 8e591cb72047 ("KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls") Cc: stable@vger.kernel.org # v3.10+ Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2021-07-22riscv: Make sure the kernel mapping does not overlap with IS_ERR_VALUEAlexandre Ghiti1-2/+16
The check that is done in setup_bootmem currently only works for 32-bit kernel since the kernel mapping has been moved outside of the linear mapping for 64-bit kernel. So make sure that for 64-bit kernel, the kernel mapping does not overlap with the last 4K of the addressable memory. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping") Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-07-23ARM: dts: imx6q-dhcom: Add keys and leds to the PDK2 boardChristoph Niedermaier1-0/+93
On the PDK2 there are 4 keys and 4 leds. DHCOM GPIOs are used for that, but one led isn't useable, because the GPIO is already used as touch interrupt. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23ARM: dts: imx6q-dhcom: Align stdout-path with other DHCOM SoMsChristoph Niedermaier1-1/+1
Set stdout-path to "serial0:15200n8" to align it with other DHCOM SoMs like the DHCOM STM32MP1. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23ARM: dts: imx6q-dhcom: Adding Wake pin to the PCIe pinctrlChristoph Niedermaier2-4/+14
The pin CSI0_DATA_EN is reserved for PCIe Wake. Move this pin to the SoM devicetree. Add PCIe Reset GPIO to the board devicetree. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23ARM: dts: imx6q-dhcom: Fill GPIO line names on DHCOM SoMChristoph Niedermaier1-0/+56
Fill in the custom GPIO line names used by DH on the DHCOM SoM. The GPIO line names are in accordance to DHCOM Design Guide R04 available at [1], section 3.9 GPIO. Adding also GPIO line names for the hardware and memory coding. [1] https://wiki.dh-electronics.com/images/5/52/DOC_DHCOM-Design-Guide_R04_2018-06-28.pdf Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23ARM: dts: imx6q-dhcom: Add interrupt and compatible to the ethernet PHYChristoph Niedermaier1-3/+13
Enable the interrupt mode for the ethernet PHY by adding the necessary property and a separate pinctrl for the PHY. Also add the compatible property for it. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23ARM: dts: imx6q-dhcom: Add the parallel system busChristoph Niedermaier1-0/+57
Add the parallel system bus provided by the i.MX6 WEIM interface via an address latch. The OE pin of the latch is controlled by a fixed regulator. The pin is low active. This is ensured by omitting the regulators property enable-active-high. The flags value of the gpio property (3rd value), which is also use to define active high/low, is set to 0 because it is ignored by gpiolib-of.c. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: kernel@dh-electronics.com To: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-22riscv: Make sure the linear mapping does not use the kernel mappingAlexandre Ghiti1-0/+2
For 64-bit kernel, the end of the address space is occupied by the kernel mapping and currently, the functions to populate the kernel page tables (i.e. create_p*d_mapping) do not override existing mapping so we must make sure the linear mapping does not map memory in the kernel mapping by clipping the memory above the memory limit. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Fixes: c9811e379b21 ("riscv: Add mem kernel parameter support") Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-07-22riscv: Fix memory_limit for 64-bit kernelAlexandre Ghiti1-2/+9
As described in Documentation/riscv/vm-layout.rst, the end of the virtual address space for 64-bit kernel is occupied by the modules/BPF/ kernel mappings so this actually reduces the amount of memory we are able to map and then use in the linear mapping. So make sure this limit is correctly set. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Fixes: 2bfc6cd81bd1 ("riscv: Move kernel mapping outside of linear mapping") Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-07-23Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"Robin Gong1-4/+4
There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS ->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA scripts should keep the same behaviour, the issue only caught in AIPS script sounds not solide. The issue is more likely as the ecspi errata ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf): eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to be sent twice So revert commit 'dd4b487b32a3' firstly. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"Robin Gong1-1/+1
There are two ways for SDMA accessing SPBA devices: one is SDMA->AIPS ->SPBA(masterA port), another is SDMA->SPBA(masterC port). Please refer to the 'Figure 58-1. i.MX 6Dual/6Quad SPBA connectivity' of i.mx6DQ Reference Manual. SDMA provide the corresponding app_2_mcu/mcu_2_app and shp_2_mcu/mcu_2_shp script for such two options. So both AIPS and SPBA scripts should keep the same behaviour, the issue only caught in AIPS script sounds not solide. The issue is more likely as the ecspi errata ERR009165(http://www.nxp.com/docs/en/errata/IMX6DQCE.pdf): eCSPI: TXFIFO empty flag glitch can cause the current FIFO transfer to be sent twice So revert commit 'df07101e1c4a' firstly. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHzOleksandr Suvorov1-0/+1
NXP and AzureWave don't recommend using SDIO bus mode 3.3V@50MHz due to noise affecting the wireless throughput. Colibri iMX6ULL uses only 3.3V signaling for Wi-Fi module AW-CM276NF. Limit the SDIO Clock on Colibri iMX6ULL to 25MHz. Fixes: c2e4987e0e02 ("ARM: dts: imx6ull: add Toradex Colibri iMX6ULL support") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23ARM: dts: imx7d-remarkable2: Add WiFi supportAlistair Francis1-0/+91
Add support for the bcm4329-fmac WiFi in the reMarkable 2, connected via SDHC. Signed-off-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23arm64: dts: ls1028: sl28: fix networking for variant 2Michael Walle1-0/+2
The PHY configuration for the variant 2 is still missing the flag for in-band signalling between PHY and MAC. Both sides - MAC and PHY - have to match the setting. For now, Linux only supports setting the MAC side and thus it has to match the setting the bootloader is configuring. Enable in-band signalling to make ethernet work. Fixes: ab43f0307449 ("arm64: dts: ls1028a: sl28: add support for variant 2") Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23ARM: dts: imx6qdl-gw5904: atecc508a supportTim Harvey1-0/+5
Add one node for the Atmel ATECC508A 'CryptoAuthentication' i2c device. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-23ARM: dts: imx6qdl-gw5xxx: add missing USB OTG OC pinmuxTim Harvey4-0/+4
Add USB OTG over-current pinmux to the GW51xx/GW52xx/GW54xx/GW553x boards. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-22Merge tag 'fallthrough-fixes-clang-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linuxLinus Torvalds1-0/+1
Pull fallthrough fix from Gustavo Silva: "Fix a fall-through warning when building with -Wimplicit-fallthrough on PowerPC" * tag 'fallthrough-fixes-clang-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: powerpc/pasemi: Fix fall-through warning for Clang
2021-07-23Merge tag 'drm-misc-next-2021-07-22' of git://anongit.freedesktop.org/drm/drm-misc into drm-nextDave Airlie9-600/+3
drm-misc-next for v5.15-rc1: UAPI Changes: - Remove sysfs stats for dma-buf attachments, as it causes a performance regression. Previous merge is not in a rc kernel yet, so no userspace regression possible. Cross-subsystem Changes: - Sanitize user input in kyro's viewport ioctl. - Use refcount_t in fb_info->count - Assorted fixes to dma-buf. - Extend x86 efifb handling to all archs. - Fix neofb divide by 0. - Document corpro,gm7123 bridge dt bindings. Core Changes: - Slightly rework drm master handling. - Cleanup vgaarb handling. - Assorted fixes. Driver Changes: - Add support for ws2401 panel. - Assorted fixes to stm, ast, bochs. - Demidlayer ingenic irq. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2d0d2fe8-01fc-e216-c3fd-38db9e69944e@linux.intel.com
2021-07-22Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds4-34/+39
Pull arm64 fixes from Will Deacon: "A pair of arm64 fixes for -rc3. The straightforward one is a fix to our firmware calling stub, which accidentally started corrupting the link register on machines with SVE. Since these machines don't really exist yet, it wasn't spotted in -next. The other fix is a revert-and-a-bit of a patch originally intended to allow PTE-level huge mappings for the VMAP area on 32-bit PPC 8xx. A side-effect of this change was that our pXd_set_huge() implementations could be replaced with generic dummy functions depending on the levels of page-table being used, which in turn broke the boot if we fail to create the linear mapping as a result of using these functions to operate on the pgd. Huge thanks to Michael Ellerman for modifying the revert so as not to regress PPC 8xx in terms of functionality. Anyway, that's the background and it's also available in the commit message along with Link tags pointing at all of the fun. Summary: - Fix hang when issuing SMC on SVE-capable system due to clobbered LR - Fix boot failure due to missing block mappings with folded page-table" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: Revert "mm/pgtable: add stubs for {pmd/pub}_{set/clear}_huge" arm64: smccc: Save lr before calling __arm_smccc_sve_check()
2021-07-22Merge tag 'hyperv-fixes-signed-20210722' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linuxLinus Torvalds1-1/+1
Pull hyperv fixes from Wei Liu: - bug fix from Haiyang for vmbus CPU assignment - revert of a bogus patch that went into 5.14-rc1 * tag 'hyperv-fixes-signed-20210722' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Revert "x86/hyperv: fix logical processor creation" Drivers: hv: vmbus: Fix duplicate CPU assignments within a device
2021-07-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds2-4/+4
Pull networking fixes from David Miller: 1) Fix type of bind option flag in af_xdp, from Baruch Siach. 2) Fix use after free in bpf_xdp_link_release(), from Xuan Zhao. 3) PM refcnt imbakance in r8152, from Takashi Iwai. 4) Sign extension ug in liquidio, from Colin Ian King. 5) Mising range check in s390 bpf jit, from Colin Ian King. 6) Uninit value in caif_seqpkt_sendmsg(), from Ziyong Xuan. 7) Fix skb page recycling race, from Ilias Apalodimas. 8) Fix memory leak in tcindex_partial_destroy_work, from Pave Skripkin. 9) netrom timer sk refcnt issues, from Nguyen Dinh Phi. 10) Fix data races aroun tcp's tfo_active_disable_stamp, from Eric Dumazet. 11) act_skbmod should only operate on ethernet packets, from Peilin Ye. 12) Fix slab out-of-bpunds in fib6_nh_flush_exceptions(),, from Psolo Abeni. 13) Fix sparx5 dependencies, from Yajun Deng. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits) dpaa2-switch: seed the buffer pool after allocating the swp net: sched: cls_api: Fix the the wrong parameter net: sparx5: fix unmet dependencies warning net: dsa: tag_ksz: dont let the hardware process the layer 4 checksum net: dsa: ensure linearized SKBs in case of tail taggers ravb: Remove extra TAB ravb: Fix a typo in comment net: dsa: sja1105: make VID 4095 a bridge VLAN too tcp: disable TFO blackhole logic by default sctp: do not update transport pathmtu if SPP_PMTUD_ENABLE is not set net: ixp46x: fix ptp build failure ibmvnic: Remove the proper scrq flush selftests: net: add ESP-in-UDP PMTU test udp: check encap socket in __udp_lib_err sctp: update active_key for asoc when old key is being replaced r8169: Avoid duplicate sysfs entry creation error ixgbe: Fix packet corruption due to missing DMA sync Revert "qed: fix possible unpaired spin_{un}lock_bh in _qed_mcp_cmd_and_union()" ipv6: fix another slab-out-of-bounds in fib6_nh_flush_exceptions fsl/fman: Add fibre support ...
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.