aboutsummaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2020-12-09efi: arm: reduce minimum alignment of uncompressed kernelArd Biesheuvel1-7/+6
Now that we reduced the minimum relative alignment between PHYS_OFFSET and PAGE_OFFSET to 2 MiB, we can take this into account when allocating memory for the decompressed kernel when booting via EFI. This minimizes the amount of unusable memory we may end up with due to the base of DRAM being occupied by firmware. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-12-09efi: capsule: clean scatter-gather entries from the D-cacheArd Biesheuvel2-0/+10
Scatter-gather lists passed to UpdateCapsule() should be cleaned from the D-cache to ensure that they are visible to the CPU after a warm reboot before the MMU is enabled. On ARM and arm64 systems, this implies a D-cache clean by virtual address to the point of coherency. However, due to the fact that the firmware itself is not able to map physical addresses back to virtual addresses when running under the OS, this must be done by the caller. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-12-09powerpc/8xx: DEBUG_PAGEALLOC doesn't require an ITLB miss exception handlerChristophe Leroy1-2/+1
Since commit e611939fc8ec ("powerpc/mm: Ensure change_page_attr() doesn't invalidate pinned TLBs"), pinned TLBs are not anymore invalidated by __kernel_map_pages() when CONFIG_DEBUG_PAGEALLOC is selected. Remove the dependency on CONFIG_DEBUG_PAGEALLOC. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e796c5fcb5898de827c803cf1ab8ba1d7a5d4b76.1606231483.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/process: Remove target specific __set_dabr()Christophe Leroy1-24/+13
__set_dabr() are simple functions that can be inline directly inside set_dabr() and using IS_ENABLED() instead of #ifdef Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c10b263668e137236c71d76648b03cf2cd1ee66f.1607076733.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/8xx: Fix early debug when SMC1 is relocatedChristophe Leroy2-0/+12
When SMC1 is relocated and early debug is selected, the board hangs is ppc_md.setup_arch(). This is because ones the microcode has been loaded and SMC1 relocated, early debug writes in the weed. To allow smooth continuation, the SMC1 parameter RAM set up by the bootloader have to be copied into the new location. Fixes: 43db76f41824 ("powerpc/8xx: Add microcode patch to move SMC parameter RAM.") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/b2f71f39eca543f1e4ec06596f09a8b12235c701.1607076683.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Handle PROTFAULT in hash_page() also for CONFIG_PPC_KUAPChristophe Leroy2-10/+11
On hash 32 bits, handling minor protection faults like unsetting dirty flag is heavy if done from the normal page_fault processing, because it implies hash table software lookup for flushing the entry and then a DSI is taken anyway to add the entry back. When KUAP was implemented, as explained in commit a68c31fc01ef ("powerpc/32s: Implement Kernel Userspace Access Protection"), protection faults has been diverted from hash_page() because hash_page() was not able to identify a KUAP fault. Implement KUAP verification in hash_page(), by clearing write permission when the access is a kernel access and Ks is 1. This works regardless of the address because kernel segments always have Ks set to 0 while user segments have Ks set to 0 only when kernel write to userspace is granted. Then protection faults can be handled by hash_page() even for KUAP. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/8a4ffe4798e9ea32aaaccdf85e411bb1beed3500.1605542955.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Make support for 603 and 604+ selectableChristophe Leroy4-3/+32
book3s/32 has two main families: - CPU with 603 cores that don't have HASH PTE table and perform SW TLB loading. - Other CPUs based on 604+ cores that have HASH PTE table. This leads to some complex logic and additionnal code to support both. This makes sense for distribution kernels that aim at running on any CPU, but when you are fine tuning a kernel for an embedded 603 based board you don't need all the HASH logic. Allow selection of support for each family, in order to opt out unneeded parts of code. At least one must be selected. Note that some of the CPU supporting HASH also support SW TLB loading, however it is not supported by Linux kernel at the time being, because they do not have alternate registers in the TLB miss exception handlers. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/8dde0cdb629a71abc29b0d85a52a86e920376cb6.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Regroup 603 based CPUs in cputableChristophe Leroy2-45/+47
In order to selectively build the kernel for 603 SW TLB handling, regroup all 603 based CPUs together. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/45065263fdb9f5cc2a2d210ec2a762ac8bf5b2bc.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Remove CONFIG_PPC_BOOK3S_6xxChristophe Leroy2-7/+3
As 601 is gone, CONFIG_PPC_BOO3S_6xx and CONFIG_PPC_BOOK3S_32 are dedundant. Remove CONFIG_PPC_BOOK3S_6xx. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/f18c16af37f6f77b577bed8d9e12831b695617ae.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Move early_mmu_init() into mmu.cChristophe Leroy2-4/+4
early_mmu_init() is independent of MMU type and not directly linked to tlb handling. In a following patch, tlb.c will be restricted to HASH mmu. Move early_mmu_init() into mmu.c which is common. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/e51b5e2fe6bca623b33116403043d3a1b5eaf826.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Inline flush_hash_entry()Christophe Leroy3-23/+11
flush_hash_entry() is a simple function calling flush_hash_pages() if it's a hash MMU or doing nothing otherwise. Inline it. And use it also in __ptep_test_and_clear_young(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/9af895be7d4b404d40e749a2659552fd138e62c4.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Inline tlb_flush()Christophe Leroy2-15/+11
On book3s/32, tlb_flush() does nothing when the CPU has a hash table, it calls _tlbia() otherwise. Inline it. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/ebc933d1c530a19ef3cf7983f6ae94814f6e92ac.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Split and inline flush_range()Christophe Leroy2-11/+15
flush_range() handle both the MMU_FTR_HPTE_TABLE case and the other case. The non MMU_FTR_HPTE_TABLE case is trivial as it is only a call to _tlbie()/_tlbia() which is not worth a dedicated function. Make flush_range() a hash specific and call it from tlbflush.h based on mmu_has_feature(MMU_FTR_HPTE_TABLE). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/132ab19aae52abc8e06ab524ec86d4229b5b9c3d.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Inline flush_tlb_range() and flush_tlb_kernel_range()Christophe Leroy2-26/+19
flush_tlb_range() and flush_tlb_kernel_range() are trivial calls to flush_range(). Make flush_range() global and inline flush_tlb_range() and flush_tlb_kernel_range(). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c7029a78e78709ad9272d7a44260e06b649169b2.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Split and inline flush_tlb_mm() and flush_tlb_page()Christophe Leroy2-15/+22
flush_tlb_mm() and flush_tlb_page() handle both the MMU_FTR_HPTE_TABLE case and the other case. The non MMU_FTR_HPTE_TABLE case is trivial as it is only a call to _tlbie()/_tlbia() which is not worth a dedicated function. Make flush_tlb_mm() and flush_tlb_page() hash specific and call them from tlbflush.h based on mmu_has_feature(MMU_FTR_HPTE_TABLE). Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/11e932ded41ba6d9b251d89b7afa33cc060d3aa4.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Move _tlbie() and _tlbia() in a new fileChristophe Leroy4-79/+85
_tlbie() and _tlbia() are used only on 603 cores while the other functions are used only on cores having a hash table. Move them into a new file named nohash_low.S Add mmu_hash_lock var is used by both, it needs to go in a common file. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/9a265b1b17a64153463d361280cb4b43eb1266a4.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Inline _tlbie() on non SMPChristophe Leroy2-5/+9
On non SMP, _tlbie() is just a tlbie plus a sync instruction. Make it static inline. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/475136425541db5c7c8a0395d19d400525b251bc.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Move _tlbie() and _tlbia() prototypes to tlbflush.hChristophe Leroy2-3/+4
In order to use _tlbie() and _tlbia() directly from asm/book3s/32/tlbflush.h, move their prototypes from mm/mm_decl.h to there. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/867587af929973ad65f8ef6972f2474a80c1737a.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Declare Hash related vars as __initdataChristophe Leroy1-4/+4
Hash related vars are used at init only. Declare them in __initdata. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/3878ea30706839fcff9196790ff3f99c128c3f6a.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Make Hash var staticChristophe Leroy3-7/+1
Hash var is used only locally in mmu.c now. No need to set it in head_32.S anymore. Make it static and initialises it to the early hash table. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/786c82a89cdfdaabb32b72a44f7c312fa81d192b.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Use mmu_has_feature(MMU_FTR_HPTE_TABLE) instead of checking Hash varChristophe Leroy2-6/+6
We now have an early hash table on hash MMU, so no need to check Hash var to know if the Hash table is set of not. Use mmu_has_feature(MMU_FTR_HPTE_TABLE) instead. This will allow optimisation via jump_label. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/f1766631a9e014b6433f1a3c12c726ddfce34220.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/32s: Make bat_addrs[] staticChristophe Leroy1-1/+1
This table is used only locally. Declare it static. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/054fec0c139fc4c0a306360b360784733c0a6e65.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/mm: Remove flush_tlb_page_nohash() prototype.Christophe Leroy2-2/+0
flush_tlb_page_nohash() was removed by commit 703b41ad1a87 ("powerpc/mm: remove flush_tlb_page_nohash") Remove stale prototype and comment. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/4a58831da6d6ba4fe309b94aa1dd8f02982d46b2.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/mm: Add mask of always present MMU featuresChristophe Leroy1-0/+25
On the same principle as commit 773edeadf672 ("powerpc/mm: Add mask of possible MMU features"), add mask for MMU features that are always there in order to optimise out dead branches. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/4943775fbe91885eb3e09133b093aaf62e55c715.1603348103.git.christophe.leroy@csgroup.eu
2020-12-09powerpc/rtas: Fix typo of ibm,open-errinjct in RTAS filterTyrel Datwyler1-1/+1
Commit bd59380c5ba4 ("powerpc/rtas: Restrict RTAS requests from userspace") introduced the following error when invoking the errinjct userspace tool: [root@ltcalpine2-lp5 librtas]# errinjct open [327884.071171] sys_rtas: RTAS call blocked - exploit attempt? [327884.071186] sys_rtas: token=0x26, nargs=0 (called by errinjct) errinjct: Could not open RTAS error injection facility errinjct: librtas: open: Unexpected I/O error The entry for ibm,open-errinjct in rtas_filter array has a typo where the "j" is omitted in the rtas call name. After fixing this typo the errinjct tool functions again as expected. [root@ltcalpine2-lp5 linux]# errinjct open RTAS error injection facility open, token = 1 Fixes: bd59380c5ba4 ("powerpc/rtas: Restrict RTAS requests from userspace") Cc: stable@vger.kernel.org Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201208195434.8289-1-tyreld@linux.ibm.com
2020-12-09Merge tag 'omap-for-v5.11/genpd-drivers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/driversArnd Bergmann3-1/+19
Driver changes for omaps for genpd for v5.11 merge window This series of changes allows booting am335x with genpd and device tree data without the legacy platform data. Also at least am437x can be booted with gendp with power domain and dts data. The SoC specific dts changes will be a separate pull request. We need the following driver changes merged before the dts changes can be done: - platform code needs a few improvments to probe l4_wkup first for clocks, and to bail out when there is no platform data - ti-sysc driver needs a non-urgent fix for asserting rstctrl reset only after disabling the clocks, to probe modules with no known control registers, and added quirk handling for gpmc devices - omap-prm driver needs a non-urgent fix for reset status bit, support added for pm_clk, and then we add the rest of am335x power domain data - clock driver for am335x needs to keep l3_main clock enabled with genpd for suspend and resume to work - wkup_m3 remoteproc driver needs support added for reset control if available instead of the legacy pdata callbacks - pm33xx driver needs PM runtime support added for genpd The am335x specific driver changes for the clock, wkup_m3, pm33xx and remoteproc drivers are quite trivial and have not caused merge conflicts in Linux next. I did not get acks for these changes except from Santosh but had already pushed out the branch already at that point. So I've added the related driver maintainers to Cc. * tag 'omap-for-v5.11/genpd-drivers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: remoteproc/wkup_m3: Use reset control driver if available soc: ti: pm33xx: Enable basic PM runtime support for genpd soc: ti: omap-prm: am3: add genpd support for remaining PRM instances soc: ti: omap-prm: Add pm_clk for genpd clk: ti: am33xx: Keep am3 l3 main clock always on for genpd bus: ti-sysc: Implement GPMC debug quirk to drop platform data bus: ti-sysc: Support modules without control registers ARM: OMAP2+: Probe PRCM first to probe l4_wkup with simple-pm-bus ARM: OMAP2+: Check for inited flag bus: ti-sysc: Assert reset only after disabling clocks soc: ti: omap-prm: Do not check rstst bit on deassert if already deasserted bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw bus: ti-sysc: Fix reset status check for modules with quirks ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS Link: https://lore.kernel.org/r/pull-1606806458-694517@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'sunxi-fixes-for-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixesArnd Bergmann2-2/+2
A few more RGMII-ID fixes * tag 'sunxi-fixes-for-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: H5: NanoPi Neo Plus2: phy-mode rgmii-id arm64: dts: allwinner: A64 Sopine: phy-mode rgmii-id Link: https://lore.kernel.org/r/2a351c9c-470f-4c5e-ba37-80065ae0586d.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dtArnd Bergmann21-19/+361
arm64: dts: amlogic updates for v5.11, round 2 - audio support for several more boards - PHY timing fixes * tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson: add i2c3/rtc nodes and vrtc alias to GT-King/GT-King-Pro arm64: dts: meson: g12b: w400: fix PHY deassert timing requirements arm64: dts: meson: g12a: x96-max: fix PHY deassert timing requirements ARM: dts: meson: fix PHY deassert timing requirements arm64: dts: meson: fix PHY deassert timing requirements arm64: dts: meson: g12b: odroid-n2: fix PHY deassert timing requirements arm64: dts: meson: minor fixups for Khadas VIM/VIM2 dts arm64: dts: meson: add audio playback to wetek-play2 arm64: dts: meson: add audio playback to wetek-hub arm64: dts: meson: add audio playback to odroid-c2 arm64: dts: meson: add audio playback to nanopi-k2 arm64: dts: meson: add audio playback to khadas-vim2 arm64: dts: meson: add audio playback to khadas-vim arm64: dts: meson: add audio playback to a95x arm64: dts: meson-axg: add GE2D node Link: https://lore.kernel.org/r/7ho8j4gkxo.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'samsung-dt-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dtArnd Bergmann3-7/+4
Samsung DTS ARM changes for v5.11, part three 1. S3C bindings and DTS cleanup, 2. Correct the clock rates for SPI0 in Artik 5 which is a fix for recently introduced Ethernet on SPI on Artik 5 board. * tag 'samsung-dt-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Reduce assigned-clocks entries for SPI0 on Artik5 board ARM: dts: s3c6410: correct SMDK6410 board compatible ARM: dts: s3c24xx: add SMDK2416 board compatible dt-bindings: arm: samsung: document S3C6410-based boards binding dt-bindings: arm: samsung: document SMDK2416 board binding Link: https://lore.kernel.org/r/20201207074528.4475-2-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'v5.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dtArnd Bergmann7-4/+81
Veyron backlight fix, another fix for dtbs-check and some additions to the rk3288-based VMARC boards. * tag 'v5.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Add SDIO0 node for VMARC SOM ARM: dts: rockchip: Add rtc node for VMARC SOM ARM: dts: rockchip: rename wdt nodename to watchdog on rv1108 ARM: dts: rockchip: Remove 0 point from brightness-levels on rk3288-veyron Link: https://lore.kernel.org/r/4582475.GXAFRqVoOG@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+1
Pull sparc64 csum fix from Al Viro: "Fix for a brown paperbag regression in sparc64" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: [regression fix] really dumb fuckup in sparc64 __csum_partial_copy() changes
2020-12-09Merge tag 'v5.11-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dtArnd Bergmann16-21/+1194
Newly added boards are the PX30 SOM system from Engicam and Kobol Helios64. The Scarlet tablet finally gets support for its cameras, now that the the rk3399-isp moved out of staging. The Odroid-Go-Advance got its joystick support now that the adc-joystick driver was merged and misc omprovements to the RockPi4, rk3328-roc-cc and orange-pi. * tag 'v5.11-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (28 commits) arm64: dts: rockchip: use USB host by default on rk3399-rock-pi-4 arm64: dts: rockchip: fix I2S conflict on rk3399-rock-pi-4 arm64: dts: rockchip: fix supplies on rk3399-rock-pi-4 arm64: dts: rockchip: Fix UART pull-ups on rk3328 arm64: dts: rockchip: add isp and sensors for Scarlet arm64: dts: rockchip: add isp0 node for rk3399 arm64: dts: rockchip: Properly define the type C connector on rk3399-orangepi arm64: dts: rockchip: Add BT support on px30-engicam arm64: dts: rockchip: Add WiFi support on px30-engicam arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 10.1" OF arm64: dts: rockchip: Enable LVDS panel on px30-engicam-edimm2.2 arm64: dts: rockchip: Enable USB Host, OTG on px30-enagicam arm64: dts: rockchip: rename sdhci nodename to mmc on rk3399 arm64: dts: rockchip: Enable analog audio on rk3328-roc-cc arm64: dts: rockchip: Enable HDMI audio on rk3328-roc-cc arm64: dts: rockchip: Set dr_mode to "host" for OTG on rk3328-roc-cc arm64: dts: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 arm64: dts: rockchip: Add Engicam C.TOUCH 2.0 dt-bindings: arm: rockchip: Add Engicam PX30.Core C.TOUCH 2.0 ... Link: https://lore.kernel.org/r/4278011.LvFx2qVVIh@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'at91-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dtArnd Bergmann9-174/+35
AT91 DT for 5.11 #2: - switch to new TCB PWM bindings - rework ADC bindings - fix sama5d2 securam and can1 * tag 'at91-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d2: fix CAN message ram offset and size ARM: dts: at91: sama5d2: map securam as device ARM: dts: at91: sam9x60ek: remove bypass property ARM: dts: at91: remove deprecated ADC properties ARM: dts: at91: at91sam9rl: fix ADC triggers ARM: dts: at91: sama5d3: use proper ADC compatible ARM: dts: at91: kizbox: switch to new pwm-atmel-tcb binding Link: https://lore.kernel.org/r/20201206013840.GA627225@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-09Merge tag 'imx-dt64-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dtArnd Bergmann30-340/+2675
i.MX arm64 device tree changes for 5.11: - New board support: LX2162A QDS, Kontron i.MX8M Mini SoMs and baseboards. - A number of patches from Adam Ford to add various audio devices for i.MX8MM/MN and update imx8mm-beacon-som board on QSPI NOR and RTC. - Correct WDOG_B pin configuration for i.MX8MM/MN/MP. - A series from Ioana Ciornei complete the MAC/PCS/PHY representation on DPAA2 devices. - Add PMU device for i.MX8MP/MN. - Add IR and CAN support for i.MX8MP/MN/MM EVK board. - Adjust GIC CPU mask to match number of CPUs for i.MX8MP/MN/MM. - A series of patch from Michael Walle to update LS1028A support with addition of CAN and OPTEE, also ENETC PTP and FlexSPI clock input correction. - Add SPDIF sound card support on imx8mq-evk board. - Misc random updates and device additions. * tag 'imx-dt64-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits) arm64: dts: imx8mm-beacon-som: Assign PMIC clock arm64: dts: imx8mm-beacon-som: Configure RTC aliases arm64: dts: imx8mn: Add node for SPDIF arm64: dts: imx8mn: Add support for micfil arm64: dts: imx8mn: Add SAI nodes arm64: dts: imx8mn: Enable Asynchronous Sample Rate Converter arm64: dts: ls1028a: make the eMMC and SD card controllers use fixed indices arm64: dts: freescale: update calibration table for TMU module arm64: dts: freescale: sl28: combine SPI MTD partitions arm64: dts: ls1028a: add optee node arm64: dts: ls1028a: fix FlexSPI clock input arm64: dts: ls1028a: fix ENETC PTP clock input arm64: dts: imx: Fix imx8mm-kontron-n801x-s.dtb target arm64: dts: imx8mn-evk: add IR support arm64: dts: imx8mm-evk: add IR support arm64: dts: imx8mq-evk: add linux,autosuspend-period property for IR arm64: dts: imx8mp-evk: add CAN support arm64: dts: imx8mq-evk: Add spdif sound card support arm64: dts: imx8mq: Configure clock rate for audio plls arm64: dts: layerscape: Add PCIe EP node for ls1088a ... Link: https://lore.kernel.org/r/20201202142717.9262-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'imx-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dtArnd Bergmann60-193/+2442
i.MX device tree update for 5.11: - New board support: imx6dl-alti6p, imx6dl-lanmcu, mx6qp-prtwd3, imx6ul-phytec-segin and imx7d-flex-concentrator. - Fix schema warnings for pwm-leds, watchdog and GPIO hog devices. - A few patches from Krzysztof Kozlowski to correct compatibles for i.MX6/7 boards. - A series from Matthias Schiffer to polish imx7-mba7 board support. - Update i.MX6/7 device trees for fsl,stop-mode support. - Correct fsl,rcpm-wakeup of LS1021A to get flextimer wake-up work. - A series of patch from Stefan Riedmueller to update phytec and segin devices. - Other small and random changes. * tag 'imx-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (40 commits) ARM: dts: imx28: Fix label name for L2 switch ARM: dts: add Protonic WD3 board ARM: dts: imx6qdl-kontron-samx6i: increase i2c-frequency ARM: dts: imx7: add support for kamstrup flex concentrator ARM: dts: ls1021a: update calibration table for TMU module ARM: dts: ls1021a: fix rcpm failed to claim resource ARM: dts: ls1021a: fix flextimer failed to wake system ARM: dts: imx50-kobo-aura: Enable eKTF2132 touchscreen ARM: dts: imx: Change flexcan node name to "can" ARM: dts: imx6q-pico: fix board compatibles ARM: dts: add Van der Laan LANMCU board ARM: dts: add Altesco I6P board ARM: dts: imx6ul: segin: peb-av-02: Mark stmpe touch as wakeup-source ARM: dts: imx6ul: phytec: Add support for optional PEB-AV-02 LCD adapter ARM: dts: imx6ul: segin: Add phyBOARD-Segin with eMMC phyCORE-i.MX6UL ARM: dts: imx50-kobo-aura: Add 'grp' suffix to pinctrl node names ARM: dts: imx: add usb alias ARM: dts: imx6/7: sync fsl,stop-mode with current flexcan driver ARM: dts: imx: Fix schema warnings for pwm-leds ARM: dts: imx7s-warp: correct vendor in compatible to Element14 ... Link: https://lore.kernel.org/r/20201202142717.9262-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dtArnd Bergmann10-15/+176
arm64: dts: amlogic updates for v5.11 - AXG SoCs: add/enable PCIe & USB OTG support - AXG SoCs: add MIPI DSI support - Khadas VIM: add RTC - several cleanups & fixups * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: arm64: dts: meson-sm1: fix typo in opp table arm64: dts: meson: add KHAMSIN IR remote node to SML5442TW arm64: dts: meson: update the Khadas VIM3/3L LED bindings arm64: dts: meson: fix spi-max-frequency on Khadas VIM2 arm64: dts: meson: add rtc aliases to meson-khadas-vim3.dtsi arm64: dts: meson: Add capacity-dmips-mhz attributes to GXM arm64: dts: meson-axg-s400: enable PCIe M.2 Key E slots arm64: dts: meson-axg: add PCIe nodes arm64: dts: meson-axg: add MIPI DSI PHY nodes arm64: dts: meson-axg: add PWRC node arm64: dts: meson: enable rtc node on Khadas VIM1/VIM2 boards dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding dt-bindings: clk: axg-clkc: add Video Clocks arm64: dts: meson: add watchdog to g12-common dtsi arm64: dts: meson: remove empty lines from aml-s905x-cc v2 dts Link: https://lore.kernel.org/r/7heek9jgox.fsf@baylibre.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'samsung-dt64-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dtArnd Bergmann6-33/+84
Samsung DTS ARM64 changes for v5.11 1. Several cleanups, including aligning node names with dtschema. 2. Add WiFi/PCIe to TM2 boards (Exynos5433). 3. Correct restart and shutdown of Exynos7 boards, as part of Paweł Chmiel Exynos7420 mainlining effort. * tag 'samsung-dt64-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Drop incorrect use of io-channel-ranges property arm64: dts: exynos: use hyphens in Exynos5433 node names arm64: dts: exynos: Correct psci compatible used on Exynos7 arm64: dts: exynos: Include common syscon restart/poweroff for Exynos7 arm64: dts: exynos: add the WiFi/PCIe support to TM2(e) boards arm64: dts: exynos: remove redundant status=okay in Exynos5433 TM2 arm64: dts: exynos: adjust node names to DT spec in Exynos7 Espresso arm64: dts: exynos: adjust node names to DT spec in Exynos5433 TM2 arm64: dts: exynos: Harmonize DWC USB3 DT nodes name Link: https://lore.kernel.org/r/20201201204404.22675-3-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'samsung-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dtArnd Bergmann10-8/+1156
Samsung DTS ARM changes for v5.11, part two 1. Add devicetree of Samsung Galaxy Note 10.1 tablets (GT-N8010/GT-N8013), called P4 Note. These are quite old but still functional devices, based on Exynos4412. 2. Minor cleanups in Odroid XU3 Ethernet. 3. Minor fixes: ADC io-channel-ranges and P4 Note touchscreen GPIO polarity. * tag 'samsung-dt-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: switch Atmel mxt reset GPIO to active low on P4 Note ARM: dts: s5pv210: Drop unneeded io-channel-ranges property in Aries ARM: dts: s5pv210: Drop incorrect use of io-channel-ranges property ARM: dts: exynos: Drop incorrect use of io-channel-ranges ARM: dts: exynos: add Samsung's Exynos4412-based P4 Note boards dt-bindings: arm: samsung: document bindings for P4 Note family board ARM: dts: exynos: Add an alias for the Ethernet interface on Odroid XU3 ARM: dts: exynos: Fix Ethernet interface description on Odroid XU3 Link: https://lore.kernel.org/r/20201201204404.22675-2-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'keystone_dts_for_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dtArnd Bergmann1-0/+112
ARM: dts: Keystone DTS update for v5.11 - HDMI Support - Analog Audio data support * tag 'keystone_dts_for_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone-k2g-evm: add HDMI and analog audio data Link: https://lore.kernel.org/r/1606851472-26593-1-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'qcom-dts-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dtArnd Bergmann5-10/+413
Qualcomm DT updates for 5.11 This adds support for SD card, WiFi, LED, touchscreeni, touchkey and fuel gauge to the Samsung Galaxy S5. Nexus 5 also gains fuel gauge support. Finally IPQ6016 gains support for the QPIC NAND controller. * tag 'qcom-dts-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: ipq6018: Add the QPIC peripheral nodes ARM: dts: qcom-pma8084: Drop incorrect use of io-channel-ranges ARM: dts: qcom: msm8974-lge-nexus5: Add fuel gauge ARM: dts: qcom: msm8974-klte: Add fuel gauge ARM: dts: qcom: msm8974-klte: Add support for SD card ARM: dts: qcom: msm8974-klte: Add support for wifi ARM: dts: qcom: msm8974-klte: Add gpio expander chip ARM: dts: qcom: msm8974-klte: Add support for led ARM: dts: qcom: msm8974-klte: Add support for touchscreen ARM: dts: qcom: msm8974-klte: Add support for touchkey ARM: dts: qcom: msm8974-klte: Merge pinctrl nodes Link: https://lore.kernel.org/r/20201130190148.345302-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'qcom-arm64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dtArnd Bergmann44-217/+3894
Qualcomm ARM64 DT updates for 5.11 For SM8250 the recently introduced support for handling boot-loader stream mappings in the ARM SMMU allow us to enable this, and thereby USB controller and PHY, SDHCI controller and FastRPC, as well as support for the SM8250 HDK board has been added. Additionally PRNG and RTC is enabled. Similarly for SM8150, the ARM SMMU could be added which allows the secondary USB controller and PHYs, as well as WiFi to be added and support for the SM8150 HDK board to be introduced. Additionally Coresight and support for the last-level cache controller was added. MSM8916 finally has VDDCX and VDDMX removed as regulators and are now handled by the rpmpd driver for the devices controlling them. The Longsheer L8150 gains touchscreen, sensors, vibrator and LED support. MSM8992 gains USB and SDHCI support as well as an I2C controller and the associated RMI4 based touchscreen for the Lumia 950. MSM8994 also gains USB and SDHCI support, as well as VADC and temp-alarm support. Then support for the Lumia 950 XL is added. SDM845 gains interconnect properties for a number of devices and the GENI wrappers gains iommu stream configuration, which means DMA operations on e.g. I2C now works. The Lenovo Yoga C630 finally has the SMMU enabled, a few fixes and the description of the eDP bridge and panel means that the laptop can now boot mainline with working display, GPU, WiFi and audio. SC7180 gains a slew of smaller improvements and fixes. * tag 'qcom-arm64-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (93 commits) arm64: dts: qcom: c630: Define eDP bridge and panel arm64: dts: qcom: c630: Fix pinctrl pins properties arm64: dts: qcom: c630: Polish i2c-hid devices arm64: dts: qcom: sc7180: Add lpass cpu node for I2S driver arm64: dts: sdm845: Add interconnect properties for QUP interconnect: qcom: sdm845: Add the missing nodes for QUP dt-bindings: interconnect: sdm845: Add IDs for the QUP ports arm64: dts: qcom: c630: Expose LID events arm64: dts: qcom: c630: Re-enable apps_smmu dts: qcom: sdm845: Add dt entries to support crypto engine. arm64: dts: qcom: qrb5165-rb5: Add support for MCP2518FD arm64: dts: qcom: sdm845: use GIC_SPI for IPA interrupts arm64: dts: qcom: sc7180: use GIC_SPI for IPA interrupts arm64: dts: qcom: sc7180: limit IPA iommu streams arm64: dts: qcom: sm8150: Add Coresight support arm64: dts: qcom: sc7180-trogdor: Make pp3300_a the default supply for pp3300_hub arm64: dts: qcom: sc7180: Add DDR/L3 votes for the pro variant arm64: dts: qcom: sc7180-lite: Tweak DDR/L3 scaling on SC7180-lite arm64: dts: qcom: sc7180-trogdor: add "pen-insert" label for trogdor arm64: qcom: sc7180: trogdor: Add ADC nodes and thermal zone for charger thermistor ... Link: https://lore.kernel.org/r/20201130190131.345187-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'ti-k3-dt-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux into arm/dtArnd Bergmann11-75/+682
Devicetree changes for TI K3 platforms for v5.11 merge window: - Standardized usage of "disabled" only in board.dts files, #interrupt-cells warning fixups, node format error fixes - J721E: R5F support, MMC/SD UHS mode added - AM654: R5F support, dss marked coherent, drop unused dma-ring-reset-quirk property - J7200: ADC support, Mailbox, hwspinlock * tag 'ti-k3-dt-for-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux: (25 commits) arm64: dts: ti: k3-j721e-common-proc-board: Add support for SD card UHS modes arm64: dts: ti: k3-j721e-main: Add output tap delay values arm64: dts: ti: k3: squelch warning about lack of #interrupt-cells arm64: dts: ti: k3-j7200-common-proc-board: Correct the name of io expander on main_i2c1 arm64: dts: ti: k3-j7200-som-p0: main_i2c0 have an ioexpander on the SOM arm64: dts: ti: k3-j7200-som-p0: Add IPC sub-mailbox nodes arm64: dts: ti: k3-j7200-main: Add mailbox cluster nodes arm64: dts: ti: k3-j7200-main: Add hwspinlock node arm64: dts: ti: am65/j721e/j7200: Mark firmware used uart as "reserved" arm64: dts: ti: k3-am654-base-board: Fix up un-necessary status set to "okay" for USB arm64: dts: ti: am65/j721e: Fix up un-necessary status set to "okay" for crypto arm64: dts: ti: k3-j721e*: Cleanup disabled nodes at SoC dtsi level arm64: dts: ti: k3-am65*: Cleanup disabled nodes at SoC dtsi level arm64: dts: ti: k3-j7200-mcu-wakeup: Enable ADC support arm64: dts: ti: k3-am65*/j721e*: Fix unit address format error for dss node arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for R5Fs arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to R5Fs arm64: dts: ti: k3-j721e-main: Add MAIN domain R5F cluster nodes arm64: dts: ti: k3-j721e-mcu: Add MCU domain R5F cluster node arm64: dts: ti: k3-am654-base-board: Reserve memory for IPC between R5F cores ... Link: https://lore.kernel.org/r/20201130174258.ljsiokkyr7x7tsbd@covenant Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'mvebu-dt64-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dtArnd Bergmann12-79/+775
mvebu dt64 for 5.11 (part 1) - Add support for IEI Puzzle-M801 board (Armada 8040 based) - Add support ESPRESSObin-Ultra (Armada 3720 based) - Clean-up and improve espressobin device tree - Switch to per-port SATA interrupts on CP110 based SoC - Use compliant node name for USB3 on CP110 based SoC - Add heartbeat LED on mcbin singleshot - Disable SMMU by default for Armada 7040 and 8040 to continued supporting custom bot firmware - Turris mox: - add 3W power capability to SFP cage - update ethernet-phy handle name * tag 'mvebu-dt64-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: armada-3720-turris-mox: add 3W power capability to SFP cage arm64: dts: marvell: keep SMMU disabled by default for Armada 7040 and 8040 arm64: dts: mcbin-singleshot: add heartbeat LED arm64: dts: marvell: cp11x: Harmonize xHCI DT nodes name arm64: dts: marvell: espressobin: Update link to V7 schematic arm64: dts: armada-3720-turris-mox: update ethernet-phy handle name arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts arm64: dts: marvell: add DT for ESPRESSObin-Ultra arm64: dts: marvell: espressobin: Add support for LED2 arm64: dts: marvell: Add a device tree for the IEI Puzzle-M801 board arm64: dts: marvell: espressobin: De-duplicate eMMC definitions arm64: dts: marvell: espressobin: Get rid of duplicate serial aliases arm64: dts: marvell: espressobin: Simplify v7 ethernet port labeling Link: https://lore.kernel.org/r/87eekaj0i4.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'mvebu-dt-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dtArnd Bergmann26-33/+810
mvebu dt for 5.11 (part 1) - Add support for MikroTik CRS3xx switches - Add support for RD-AC3X-48G4X2XL board : Armada 382 SoC connected to Prestera AC3X ASIC through PCI - Clean-up kirkwood device tree: replace "ok" by "okay" - Improve device tree for PCA953x gpio expander nodes - Use compliant node name for USB3 on armada 375 - 98dx3236 SoCs: - remove non-existent i2c1 - add i2c0 pinctrl information - Improve device tree for Turris Omnia * tag 'mvebu-dt-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: ARM: dts: mvebu: Add device tree for RD-AC3X-48G4X2XL board arm: dts: marvell: armada-375: Harmonize DWC USB3 DT nodes name ARM: dts: turris-omnia: remove unneeded status = "okay" properties ARM: dts: turris-omnia: update ethernet-phy node and handle name ARM: dts: turris-omnia: add LED controller node ARM: dts: turris-omnia: add SFP node ARM: dts: turris-omnia: describe switch interrupt ARM: dts: turris-omnia: add comphy handle to eth2 ARM: dts: turris-omnia: enable HW buffer management ARM: dts: Add i2c0 pinctrl information for 98dx3236 ARM: dts: Remove non-existent i2c1 from 98dx3236 ARM: dts: armada: align GPIO hog names with dtschema ARM: dts: dove: fix PCA95xx GPIO expander properties on A510 ARM: dts: kirkwood: replace status value "ok" by "okay" ARM: dts: mvebu: Add CRS328-4C-20S-4S board ARM: dts: mvebu: Add CRS305-1G-4S board ARM: dts: mvebu: Add CRS326-24G-2S board Link: https://lore.kernel.org/r/87h7p6j0m7.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'nuvoton-5.11-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dtArnd Bergmann10-21/+4861
Nuvoton device tree updates for 5.11 - New machines * Fii Kudo, a NPCM730 BMC * Quanta GSJ, a NPCM750 BMC * Qanta Olympus RunBMC, a NPCM750 BMC - Updates to the common device trees and NCPM750 EVB * tag 'nuvoton-5.11-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: dt-bindings: vendor-prefixes: Add FII ARM: dts: nuvoton: Add Fii Kudo system ARM: dts: nuvoton: Add NPCM7xx RunBMC Olympus Quanta machine ARM: dts: nuvoton: Add Quanta GSJ BMC ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl ARM: dts: nuvoton: Add Nuvoton NPCM730 device tree ARM: dts: nuvoton: Add new device nodes to NPCM750 EVB ARM: dts: nuvoton: Add new device nodes ARM: dts: nuvoton: Add pinctrl and GPIO node ARM: dts: nuvoton: Modify timer register size ARM: dts: nuvoton: Modify clock parameters Link: https://lore.kernel.org/r/CACPK8Xd8RaLv_p6t9ckBwCwtZww+2YYOAoAYQdvni0dxc2mS7A@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'v5.10-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dtArnd Bergmann15-71/+2282
mt8173: - add new power domain controller node mt8183: - add new power domain controller - add display, iommu and dsi nodes mt8192: - add basic support, pinctrl, uart, spi, i2c and timer mt8516: - add auxadc, efuse and usb nodes mt8167: - add basic support for the SoC - add support for the pumkin board mt6779: - add initial support, interrupt controller, clocks, uart mt7622: - PWM node for all available PWM channels * tag 'v5.10-next-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (25 commits) dts64: mt7622: disable spi1 and uart2 because pins are used by pwm dts64: mt7622: enable all pwm for bananapi r64 arm64: dts: mt8183: Add display nodes for MT8183 arm64: dts: mt8183: Add iommu and larb nodes arm64: dts: mt8183: Add dsi node arm64: dts: mt8183: Add pwm and backlight node arm64: dts: mediatek: Add mt8183 power domains controller arm64: dts: mediatek: Add smi_common node for MT8183 arm64: dts: mediatek: Add mt8173 power domain controller dt-bindings: power: Add MT8192 power domains dt-bindings: power: Add MT8183 power domains dt-bindings: power: Add bindings for the Mediatek SCPSYS power domains controller arm64: dts: Add Mediatek SoC MT8192 and evaluation board dts and Makefile arm64: dts: mediatek: add MT8167 pumpkin board dts arm64: dts: mediatek: add dtsi for MT8167 dt-bindings: arm64: dts: mediatek: Add mt8167-pumpkin board arm64: dts: mediatek: mt8516: add efuse node arm64: dts: mediatek: align GPIO hog names with dtschema arm64: dts: mediatek: mt8516: add usb1 node arm64: dts: mediatek: mt8516: rename usb phy ... Link: https://lore.kernel.org/r/72fe1c4f-f27c-c455-dfd9-66bde90bb295@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dtArnd Bergmann6-0/+265
This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 5.11, please pull the following: - Rafal adds initial support for the Broadcom 4908 which are SoCs used in home routers and are based on the DSL architecture and using Broadcom Brahma-B53 CPUs. * tag 'arm-soc/for-5.11/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: add config for Broadcom BCM4908 SoCs arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files dt-bindings: arm: bcm: document BCM4908 bindings Link: https://lore.kernel.org/r/20201128163410.1691529-4-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'arm-soc/for-5.11/devicetree' of https://github.com/Broadcom/stblinux into arm/dtArnd Bergmann30-132/+150
This pull request contains Broadcom ARM-based SoCs changes for 5.11, please pull the following: - Vivek updates the Linksys EA9500 DTS by adding the two additional switch port nodes (5 & 7), providing a flash partition layout to make the device usable with OpenWrt, and finally switches to using the pin controller rather than using mdio-mux to get the same outcome. - Serge fixes the USB Device Tree nodes unit name to be conformant to the recommended name patterns. - Rafal re-arranges all the nodes that belonged to the CRU block to be under the CRU node (such as PLLs). He also disables the USB3 PHY node for devices that lack USB3 and adds USB3 support to the Luxul XWR-3150 DTS. - Jonathan drops the incorrect 'io-channel-ranges' from the Cygnus SoC DTSI. - Maxime disables the Wi-Fi frequencies (around 2.4GHz) for HDMI on the Raspberry Pi 4 due to some cross-talk between the two blocks. - Pavel updates the DWC2 USB controller RX FIFO sizes to be more accurate for all BCM283x (Raspberr Pi) SoCs. - Florian updates all BCM5301x and NSP Device Tree files to allow switching the Broadcom B53 Ethernet switch device tree binding to YAML. * tag 'arm-soc/for-5.11/devicetree' of https://github.com/Broadcom/stblinux: (22 commits) dt-bindings: net: dsa: b53: Add YAML bindings ARM: dts: NSP: Provide defaults ports container node ARM: dts: NSP: Add a SRAB compatible string for each board ARM: dts: NSP: Fix Ethernet switch SGMII register name ARM: dts: NSP: Update ethernet switch node name ARM: dts: BCM5301X: Provide defaults ports container node ARM: dts: BCM5301X: Add a default compatible for switch node ARM: dts: BCM5301X: Update Ethernet switch node name dt-bindings: net: dsa: Document sfp and managed properties dt-bindings: net: dsa: Extend switch nodes pattern ARM: dts: bcm283x: increase dwc2's RX FIFO size ARM: dts: rpi-4: disable wifi frequencies ARM: dts: Cygnus: Drop incorrect io-channel-ranges property. ARM: dts: BCM5301X: Enable USB 3 PHY on Luxul XWR-3150 ARM: dts: BCM5301X: Disable USB 3 PHY on devices without USB 3 ARM: dts: BCM5301X: Move CRU devices to the CRU node ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl ARM: dts: BCM5301X: Use corretc pinctrl compatible for 4709x ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions ARM: dts: BCM5310X: Harmonize xHCI DT nodes name ... Link: https://lore.kernel.org/r/20201128163410.1691529-3-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'sunxi-dt-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dtArnd Bergmann16-9/+545
Our usual bunch of patches to support the Allwinner SoCs, this time adding: - Some nice pinephone additions - I2S support for the A64, H3, H5 and H6 - New boards: Elimo Impetus, Elimo Initium, FriendlyArm ZeroPi, NanoPi R1 * tag 'sunxi-dt-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits) ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add gpio-line-names ARM: dts: sun8i: h3: Add initial NanoPi R1 support arm64: dts: allwinner: pinephone: Use generic sensor node names ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC dt-bindings: arm: sunxi: add Elimo bindings ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM arm64: dts: allwinner: pinephone: Add Bluetooth support arm64: dts: allwinner: pinephone: Add WiFi support arm64: dts: allwinner: pinephone: Add light/proximity sensor arm64: dts: allwinner: pinephone: Add LED flash arm64: dts: allwinner: pinephone: Set ALDO3 to exactly 3v0 arm64: dts: allwinner: pinephone: Remove AC power supply arm: dts: sunxi: h3/h5: Add I2S2 node arm64: dts: allwinner: a64: Add I2S2 node arm64: dts: allwinner: h6: Add I2S1 node arm64: dts: allwinner: h6: PineH64 model B: Add wifi ARM: dts: sun8i-v3s: Add I2C1 PB pins description ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi dt-bindings: vendors: add Elimo Engineering vendor prefix ARM: dts: sun8i: add FriendlyArm ZeroPi support ... Link: https://lore.kernel.org/r/551fdf4f-8a0b-4a22-ba49-b4f61520a9ab.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-08Merge tag 'at91-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dtArnd Bergmann12-41/+62
AT91 DT for 5.11: - fix USB host pinctrl - fix DT schema warnings * tag 'at91-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host ARM: dts: at91: sama5d4_xplained: add pincontrol for USB Host ARM: dts: at91: sam9x60: add pincontrol for USB Host ARM: dts: at91: at91-sama5d27_som1: fix EEPROM compatible ARM: dts: at91: Fix schema warnings for pwm-leds ARM: dts: at91: smartkiz: Reference led node directly Link: https://lore.kernel.org/r/20201127220403.GA1735041@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.