| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The PMIC node can be a clock provider (for its 32 kHz clock) and authors
of imx8mq-librem5-devkit.dts apparently wanted this because they added
input clock and clock-output-names.
Add necessary clock-cells to the PMIC node.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-and-tested-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The SP805 binding sets the order of the clock-names to be: "wdog_clk",
"apb_pclk" (in exactly that order).
Change the order in the DTs for Freescale platforms to match that. The
two clocks given in all nodes are actually the same, so that does not
change any behaviour.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add a DTS for Variscite Symphony evaluation kit with VAR-SOM-MX8MM
System on Module.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add DTSI of Variscite VAR-SOM-MX8MM System on Module in a basic version,
delivered with Variscite Symphony Evaluation kit. This version comes
with:
- 2 GB of RAM,
- 16 GB eMMC,
- Gigabit Ethernet PHY,
- 802.11 ac/a/b/g/n WiFi with 4.2 Bluetooth (Cypress CYW43353),
- CAN bus,
- Audio codec (not yet configured in DTSI).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
We want the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The SP805 binding sets the name for the actual watchdog clock to
"wdog_clk" (with an underscore).
Change the name in the DTs for Broadcom platforms to match that. The
Linux and U-Boot driver use the *first* clock for this purpose anyway,
so it does not break anything.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
According to device tree specification, device node names should be
somewhat generic and reflecting the function of the device so add the
"hog" suffixes to all GPIO hog nodes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
According to device tree specification, device node names should be
somewhat generic and reflecting the function of the device so add the
"hog" suffix to wl-reg-on GPIO hog.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
There is no LED default state "none". leds-gpio driver maps it to
"off", so correct them to fix dtbs_check warnings like:
arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml:
leds: led0:default-state:0: 'none' is not one of ['on', 'off', 'keep']
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The following dtc warning is seen when building with W=1:
arch/arm/boot/dts/imx6qdl-gw553x.dtsi:65.12-110.4: Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Remove the unneeded #address-cells/#size-cells properties to fix the issue.
Fixes: 64bf0a0af18d ("ARM: dts: imx6qdl-gw: add Gateworks System Controller support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add audio sound card node, which depends on codec node,
SSI node, audmux node.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Headphone detection is triggered by GPIO, then driver can
switch between speaker and headphone.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Headphone detection is triggered by GPIO, then driver can
switch between speaker and headphone.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Link: https://lore.kernel.org/r/20200830201112.1934-1-freifunk@adrianschmutzler.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
While the DT parser recognizes "ok" as a valid value for the
"status" property, it is actually mentioned nowhere. Use the
proper value "okay" instead, as done in the majority of files
already.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Link: https://lore.kernel.org/r/20200830190820.20583-1-freifunk@adrianschmutzler.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The use of cpu0-supply for cpu0 alone is deprecated,
so add cpu-supply to each cpu separately and
update all existing rk3066a boards.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200813172451.13754-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add label to cpu@1 for later use.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200813172451.13754-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The use of cpu0-supply for cpu0 alone is deprecated,
so add cpu-supply to each cpu separately and
update all existing rk3288 boards that use this property.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200813180241.14660-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
TSX suspend load tracking instruction is supported by the Intel uarch
Sapphire Rapids. It aims to give a way to choose which memory accesses
do not need to be tracked in the TSX read set. It's availability is
indicated as CPUID.(EAX=7,ECX=0):EDX[bit 16].
Expose TSX Suspend Load Address Tracking feature in KVM CPUID, so KVM
could pass this information to guests and they can make use of this
feature accordingly.
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1598316478-23337-3-git-send-email-cathy.zhang@intel.com
|
|
The property cpu-supply should be added to each cpu separately,
so fix that for rk3328-evb.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200813181711.15906-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The rk3318 A95X Z2 boards are sold as TV box.
No further documentation is given, but from the dts files
extracted it seems that the rk3318 processor is simulair
to the rk3328. This dts file contains only the basic nodes
that have support in the mainline kernel.
Features:
CPU: RK3318 Quad-Core Cortex-A53
GPU: Mali-450
RAM: 2/4GB DDR3
ROM: EMMC 16/32/64GB
HDMI: HDMI 2.0a for 4k@60Hz
Ethernet: 10/100M standard RJ-45
WiFi: 2.4G+5G WIFI, 802.11 b/g/n
Bluetooth: 4.0
1 x USB 3.0
1 x USB 2.0
1 x Micro SD card slot
1 x SPDIF
1 x AV
1 x DC IN
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200808160618.15445-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled
GPIO pin change compared to 4B, 4C.
So, add or enable difference nodes/properties in 4C dts
by including common dtsi.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200807094826.12019-4-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
RockPI 4B has AP6256 Wifi/BT, so enable them in 4B dts
instead of enable in common dtsi.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200807094826.12019-3-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
ROCKPi 4 has 3 variants of hardware platforms called
RockPI 4A, 4B, and 4C.
- ROCKPi 4A has no Wif/BT.
- ROCKPi 4B has AP6256 Wifi/BT, PoE.
- ROCKPi 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled
GPIO pin change compared to 4B, 4C
So move common nodes, properties into dtsi file and include
on respective variant dts files.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200807094826.12019-2-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
A test with the command below shows that the compatible string
"rockchip,rk3308-spdif", "rockchip,rk3328-spdif"
is already in use, but is not added to a document.
The current fallback string "rockchip,rk3328-spdif" points to a data
set enum RK_SPDIF_RK3366 in rockchip_spdif.c that is not used both
in the mainline as in the manufacturer kernel.
(Of the enum only RK_SPDIF_RK3288 is used.)
So if the properties don't change we might as well use the first SoC
in line as fallback string and add the description for rk3308 as:
"rockchip,rk3308-spdif", "rockchip,rk3066-spdif"
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/sound/rockchip-spdif.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200818143727.5882-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Pull x86 fixes from Thomas Gleixner:
"Three interrupt related fixes for X86:
- Move disabling of the local APIC after invoking fixup_irqs() to
ensure that interrupts which are incoming are noted in the IRR and
not ignored.
- Unbreak affinity setting.
The rework of the entry code reused the regular exception entry
code for device interrupts. The vector number is pushed into the
errorcode slot on the stack which is then lifted into an argument
and set to -1 because that's regs->orig_ax which is used in quite
some places to check whether the entry came from a syscall.
But it was overlooked that orig_ax is used in the affinity cleanup
code to validate whether the interrupt has arrived on the new
target. It turned out that this vector check is pointless because
interrupts are never moved from one vector to another on the same
CPU. That check is a historical leftover from the time where x86
supported multi-CPU affinities, but not longer needed with the now
strict single CPU affinity. Famous last words ...
- Add a missing check for an empty cpumask into the matrix allocator.
The affinity change added a warning to catch the case where an
interrupt is moved on the same CPU to a different vector. This
triggers because a condition with an empty cpumask returns an
assignment from the allocator as the allocator uses for_each_cpu()
without checking the cpumask for being empty. The historical
inconsistent for_each_cpu() behaviour of ignoring the cpumask and
unconditionally claiming that CPU0 is in the mask struck again.
Sigh.
plus a new entry into the MAINTAINER file for the HPE/UV platform"
* tag 'x86-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/matrix: Deal with the sillyness of for_each_cpu() on UP
x86/irq: Unbreak interrupt affinity setting
x86/hotplug: Silence APIC only after all interrupts are migrated
MAINTAINERS: Add entry for HPE Superdome Flex (UV) maintainers
|
|
When POE used, the current power routing is failing to power-up
the PMIC regulators which cause Linux boot hangs.
This patch is trying to update the power routing in order to
support Type C0 and POE powering methods.
As per the schematics, sys_12v is a common output power regulator
when type c and POE power being used. sys_12v is supplied by dc_12v
which is supplied from MP8859 in type c0 power routing and sys_12v
is supplied by MP8009 PoE PD in POE power supply routing.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Suniel Mahesh <sunil@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200818184505.30064-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Revert the platform driver conversion of interrupt chip drivers as
it turned out to create more problems than it solves.
- Fix a trivial typo in the new module helpers which made probing
reliably fail.
- Small fixes in the STM32 and MIPS Ingenic drivers
- The TI firmware rework which had badly managed dependencies and had
to wait post rc1"
* tag 'irq-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/ingenic: Leave parent IRQ unmasked on suspend
irqchip/stm32-exti: Avoid losing interrupts due to clearing pending bits by mistake
irqchip: Revert modular support for drivers using IRQCHIP_PLATFORM_DRIVER helperse
irqchip: Fix probing deferal when using IRQCHIP_PLATFORM_DRIVER helpers
arm64: dts: k3-am65: Update the RM resource types
arm64: dts: k3-am65: ti-sci-inta/intr: Update to latest bindings
arm64: dts: k3-j721e: ti-sci-inta/intr: Update to latest bindings
irqchip/ti-sci-inta: Add support for INTA directly connecting to GIC
irqchip/ti-sci-inta: Do not store TISCI device id in platform device id field
dt-bindings: irqchip: Convert ti, sci-inta bindings to yaml
dt-bindings: irqchip: ti, sci-inta: Update docs to support different parent.
irqchip/ti-sci-intr: Add support for INTR being a parent to INTR
dt-bindings: irqchip: Convert ti, sci-intr bindings to yaml
dt-bindings: irqchip: ti, sci-intr: Update bindings to drop the usage of gic as parent
firmware: ti_sci: Add support for getting resource with subtype
firmware: ti_sci: Drop unused structure ti_sci_rm_type_map
firmware: ti_sci: Drop the device id to resource type translation
|
|
Pull locking fixes from Thomas Gleixner:
"A set of fixes for lockdep, tracing and RCU:
- Prevent recursion by using raw_cpu_* operations
- Fixup the interrupt state in the cpu idle code to be consistent
- Push rcu_idle_enter/exit() invocations deeper into the idle path so
that the lock operations are inside the RCU watching sections
- Move trace_cpu_idle() into generic code so it's called before RCU
goes idle.
- Handle raw_local_irq* vs. local_irq* operations correctly
- Move the tracepoints out from under the lockdep recursion handling
which turned out to be fragile and inconsistent"
* tag 'locking-urgent-2020-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
lockdep,trace: Expose tracepoints
lockdep: Only trace IRQ edges
mips: Implement arch_irqs_disabled()
arm64: Implement arch_irqs_disabled()
nds32: Implement arch_irqs_disabled()
locking/lockdep: Cleanup
x86/entry: Remove unused THUNKs
cpuidle: Move trace_cpu_idle() into generic code
cpuidle: Make CPUIDLE_FLAG_TLB_FLUSHED generic
sched,idle,rcu: Push rcu_idle deeper into the idle path
cpuidle: Fixup IRQ state
lockdep: Use raw_cpu_*() for per-cpu variables
|
|
Pull powerpc fixes from Michael Ellerman:
- Revert our removal of PROT_SAO, at least one user expressed an
interest in using it on Power9. Instead don't allow it to be used in
guests unless enabled explicitly at compile time.
- A fix for a crash introduced by a recent change to FP handling.
- Revert a change to our idle code that left Power10 with no idle
support.
- One minor fix for the new scv system call path to set PPR.
- Fix a crash in our "generic" PMU if branch stack events were enabled.
- A fix for the IMC PMU, to correctly identify host kernel samples.
- The ADB_PMU powermac code was found to be incompatible with
VMAP_STACK, so make them incompatible in Kconfig until the code can
be fixed.
- A build fix in drivers/video/fbdev/controlfb.c, and a documentation
fix.
Thanks to Alexey Kardashevskiy, Athira Rajeev, Christophe Leroy,
Giuseppe Sacco, Madhavan Srinivasan, Milton Miller, Nicholas Piggin,
Pratik Rajesh Sampat, Randy Dunlap, Shawn Anastasio, Vaidyanathan
Srinivasan.
* tag 'powerpc-5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32s: Disable VMAP stack which CONFIG_ADB_PMU
Revert "powerpc/powernv/idle: Replace CPU feature check with PVR check"
powerpc/perf: Fix reading of MSR[HV/PR] bits in trace-imc
powerpc/perf: Fix crashes with generic_compat_pmu & BHRB
powerpc/64s: Fix crash in load_fp_state() due to fpexc_mode
powerpc/64s: scv entry should set PPR
Documentation/powerpc: fix malformed table in syscall64-abi
video: fbdev: controlfb: Fix build for COMPILE_TEST=y && PPC_PMAC=n
selftests/powerpc: Update PROT_SAO test to skip ISA 3.1
powerpc/64s: Disallow PROT_SAO in LPARs by default
Revert "powerpc/64s: Remove PROT_SAO support"
|
|
There is one LLCC logical bank(LLCC0) on SC7180 SoC and the
size of the LLCC0 base is 0x50000(320KB) not 2MB, so correct
the size and fix copy paste mistake carried over from SDM845.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Fixes: 7cee5c742899 ("arm64: dts: qcom: sc7180: Fix node order")
Fixes: c831fa299996 ("arm64: dts: qcom: sc7180: Add Last level cache controller node")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/20200818145514.16262-1-saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Constants were used to allow merging separately from the dt-bindings,
switch to symbolic names now that dt-bindings have landed.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200818160445.14008-3-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Constants were used to allow merging separately from the dt-bindings,
switch to symbolic names now that dt-bindings have landed.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200818160445.14008-2-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The compatible for hsphy has out of place indentation, and the assigned
clock rate for GCC_USB30_PRIM_MASTER_CLK is incorrect, the clock doesn't
support a rate of 150000000. Use a rate of 200000000 to match downstream.
Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200818160445.14008-1-jonathan@marek.ca
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
This node defines alternate DP HPD functionality of GPIO.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
Link: https://lore.kernel.org/r/20200818033657.16074-1-tanmay@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
As per binding documentation, we should have dsi as node 0 and hdmi
audio as node 1, so fix it
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: aef9a119dfb9 ("arm64: dts: qcom: sdm845-db845c: Add hdmi bridge nodes")
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200828074347.3788518-1-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
"interrupt" is not a valid property.
Fixes: 7f8bcc0c4cfe ("arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20200829111209.32685-1-krzk@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Intel TSX suspend load tracking instructions aim to give a way to choose
which memory accesses do not need to be tracked in the TSX read set. Add
TSX suspend load tracking CPUID feature flag TSXLDTRK for enumeration.
A processor supports Intel TSX suspend load address tracking if
CPUID.0x07.0x0:EDX[16] is present. Two instructions XSUSLDTRK, XRESLDTRK
are available when this feature is present.
The CPU feature flag is shown as "tsxldtrk" in /proc/cpuinfo.
Signed-off-by: Kyung Min Park <kyung.min.park@intel.com>
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/1598316478-23337-2-git-send-email-cathy.zhang@intel.com
|
|
Device tree schema expects regulator names to be lowercase. This fixes
dtbs_check warnings like:
pmic@4b: regulators:LDO1:regulator-name:0: 'LDO1' does not match '^ldo[1-6]$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Correct the EEPROM node compatible to match device tree schema (invalid
space, unknown ID) to fix dtbs_check warnings:
arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml: eeprom@50:
compatible: ['microchip, at24c64d', 'atmel,24c64'] is not valid under any of the given schemas
arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dt.yaml: eeprom@50:
compatible:0: 'microchip, at24c64d' does not match '^[a-zA-Z][a-zA-Z0-9,+\\-._]+$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Device tree schema expects regulator names to be lowercase. This fixes
dtbs_check warnings like:
pmic@4b: regulators:LDO1:regulator-name:0: 'LDO1' does not match '^ldo[1-6]$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others). This avoids copying deprecated code into
future DTSes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others). This avoids copying deprecated code into
future DTSes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others). This avoids copying deprecated code into
future DTSes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others). This avoids copying deprecated code into
future DTSes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others). This avoids copying deprecated code into
future DTSes.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The "pinctrl-names" property in iomux node does not make sense on its
own (without "pinctrl-X").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The "pinctrl-names" property in iomux node does not make sense on its
own (without "pinctrl-X").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The "pinctrl-names" property in iomux node does not make sense on its
own (without "pinctrl-X").
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
Krzysztof Kozlowski
Andre Przywara
Greg Kroah-Hartman
Adrian Schmutzler
Fabio Estevam
Shengjiu Wang
Johan Jonker
Cathy Zhang
Jagan Teki
Linus Torvalds
Sai Prakash Ranjan
Jonathan Marek
Tanmay Shah
Vinod Koul
Kyung Min Park