aboutsummaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2020-07-09KVM: x86: Rename cpuid_update() callback to vcpu_after_set_cpuid()Xiaoyao Li5-8/+9
The name of callback cpuid_update() is misleading that it's not about updating CPUID settings of vcpu but updating the configurations of vcpu based on the CPUIDs. So rename it to vcpu_after_set_cpuid(). Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20200709043426.92712-5-xiaoyao.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-09KVM: x86: Rename kvm_update_cpuid() to kvm_vcpu_after_set_cpuid()Xiaoyao Li1-3/+3
Now there is no updating CPUID bits behavior in kvm_update_cpuid(), rename it to kvm_vcpu_after_set_cpuid(). Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20200709043426.92712-4-xiaoyao.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-09KVM: x86: Extract kvm_update_cpuid_runtime() from kvm_update_cpuid()Xiaoyao Li4-24/+34
Beside called in kvm_vcpu_ioctl_set_cpuid*(), kvm_update_cpuid() is also called 5 places else in x86.c and 1 place else in lapic.c. All those 6 places only need the part of updating guest CPUIDs (OSXSAVE, OSPKE, APIC, KVM_FEATURE_PV_UNHALT, ...) based on the runtime vcpu state, so extract them as a separate kvm_update_cpuid_runtime(). Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20200709043426.92712-3-xiaoyao.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-09KVM: x86: Introduce kvm_check_cpuid()Xiaoyao Li2-21/+36
Use kvm_check_cpuid() to validate if userspace provides legal cpuid settings and call it before KVM take any action to update CPUID or update vcpu states based on given CPUID settings. Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20200709043426.92712-2-xiaoyao.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-09KVM: X86: Move kvm_apic_set_version() to kvm_update_cpuid()Xiaoyao Li1-2/+2
There is no dependencies between kvm_apic_set_version() and kvm_update_cpuid() because kvm_apic_set_version() queries X2APIC CPUID bit, which is not touched/changed by kvm_update_cpuid(). Obviously, kvm_apic_set_version() belongs to the category of updating vcpu model. Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20200708065054.19713-9-xiaoyao.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-09x86/entry/common: Make prepare_exit_to_usermode() staticThomas Gleixner1-1/+1
No users outside this file anymore. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20200708192934.301116609@linutronix.de
2020-07-09x86/entry: Mark check_user_regs() noinstrThomas Gleixner1-1/+1
It's called from the non-instrumentable section. Fixes: c9c26150e61d ("x86/entry: Assert that syscalls are on the right stack") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20200708192934.191497962@linutronix.de
2020-07-09x86/traps: Disable interrupts in exc_aligment_check()Thomas Gleixner1-0/+2
exc_alignment_check() fails to disable interrupts before returning to the entry code. Fixes: ca4c6a9858c2 ("x86/traps: Make interrupt enable/disable symmetric in C code") Reported-by: syzbot+0889df9502bc0f112b31@syzkaller.appspotmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Andy Lutomirski <luto@kernel.org> Link: https://lkml.kernel.org/r/20200708192934.076519438@linutronix.de
2020-07-09arm64: Add missing sentinel to erratum_1463225Florian Fainelli1-0/+1
When the erratum_1463225 array was introduced a sentinel at the end was missing thus causing a KASAN: global-out-of-bounds in is_affected_midr_range_list on arm64 error. Fixes: a9e821b89daa ("arm64: Add KRYO4XX gold CPU cores to erratum list 1463225 and 1418040") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Link: https://lore.kernel.org/linux-arm-kernel/CA+G9fYs3EavpU89-rTQfqQ9GgxAMgMAk7jiiVrfP0yxj5s+Q6g@mail.gmail.com/ Link: https://lore.kernel.org/r/20200709051345.14544-1-f.fainelli@gmail.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-09crypto: aesni - Fix build with LLVM_IAS=1Sedat Dilek1-3/+3
When building with LLVM_IAS=1 means using Clang's Integrated Assembly (IAS) from LLVM/Clang >= v10.0.1-rc1+ instead of GNU/as from GNU/binutils I see the following breakage in Debian/testing AMD64: <instantiation>:15:74: error: too many positional arguments PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, ^ arch/x86/crypto/aesni-intel_asm.S:1598:2: note: while in macro instantiation GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp) ^ <instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix GHASH_4_ENCRYPT_4_PARALLEL_dec %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc ^ arch/x86/crypto/aesni-intel_asm.S:1599:2: note: while in macro instantiation GCM_ENC_DEC dec ^ <instantiation>:15:74: error: too many positional arguments PRECOMPUTE 8*3+8(%rsp), %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, ^ arch/x86/crypto/aesni-intel_asm.S:1686:2: note: while in macro instantiation GCM_INIT %r9, 8*3 +8(%rsp), 8*3 +16(%rsp), 8*3 +24(%rsp) ^ <instantiation>:47:2: error: unknown use of instruction mnemonic without a size suffix GHASH_4_ENCRYPT_4_PARALLEL_enc %xmm9, %xmm10, %xmm11, %xmm12, %xmm13, %xmm14, %xmm0, %xmm1, %xmm2, %xmm3, %xmm4, %xmm5, %xmm6, %xmm7, %xmm8, enc ^ arch/x86/crypto/aesni-intel_asm.S:1687:2: note: while in macro instantiation GCM_ENC_DEC enc Craig Topper suggested me in ClangBuiltLinux issue #1050: > I think the "too many positional arguments" is because the parser isn't able > to handle the trailing commas. > > The "unknown use of instruction mnemonic" is because the macro was named > GHASH_4_ENCRYPT_4_PARALLEL_DEC but its being instantiated with > GHASH_4_ENCRYPT_4_PARALLEL_dec I guess gas ignores case on the > macro instantiation, but llvm doesn't. First, I removed the trailing comma in the PRECOMPUTE line. Second, I substituted: 1. GHASH_4_ENCRYPT_4_PARALLEL_DEC -> GHASH_4_ENCRYPT_4_PARALLEL_dec 2. GHASH_4_ENCRYPT_4_PARALLEL_ENC -> GHASH_4_ENCRYPT_4_PARALLEL_enc With these changes I was able to build with LLVM_IAS=1 and boot on bare metal. I confirmed that this works with Linux-kernel v5.7.5 final. NOTE: This patch is on top of Linux v5.7 final. Thanks to Craig and especially Nick for double-checking and his comments. Suggested-by: Craig Topper <craig.topper@intel.com> Suggested-by: Craig Topper <craig.topper@gmail.com> Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: "ClangBuiltLinux" <clang-built-linux@googlegroups.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1050 Link: https://bugs.llvm.org/show_bug.cgi?id=24494 Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-07-09ARM: s3c24xx: leds: Convert to use GPIO descriptorsLinus Walleij5-42/+192
This converts the s3c24xx LED driver to use GPIO descriptors and also modify all board files to account for these changes by registering the appropriate GPIO tables for each board. The driver was using a custom flag to indicate open drain (tristate) but this can be handled by standard descriptor machine tables. The driver was setting non-pull-up for the pin using the custom S3C24xx GPIO API, but this is a custom pin control system used by the S3C24xx and no generic GPIO function, so this has simply been pushed back into the respective board files. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-07-09efi/libstub/arm64: link stub lib.a conditionallyMasahiro Yamada1-1/+1
Since commit 799c43415442 ("kbuild: thin archives make default for all archs"), core-y is passed to the linker with --whole-archive. Hence, the whole of stub library is linked to vmlinux. Use libs-y so that lib.a is passed after --no-whole-archive for conditional linking. The unused drivers/firmware/efi/libstub/relocate.o will be dropped for ARCH=arm64. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20200604022031.164207-1-masahiroy@kernel.org Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-07-08xtensa/simdisk: remove the call to check_disk_changeChristoph Hellwig1-2/+0
The simdisk driver doesn't support event notifications, which means that check_disk_change is a no-op. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08arm64: kgdb: Fix single-step exception handling oopsWei Li1-1/+1
After entering kdb due to breakpoint, when we execute 'ss' or 'go' (will delay installing breakpoints, do single-step first), it won't work correctly, and it will enter kdb due to oops. It's because the reason gotten in kdb_stub() is not as expected, and it seems that the ex_vector for single-step should be 0, like what arch powerpc/sh/parisc has implemented. Before the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 due to Breakpoint @ 0xffff8000101486cc [3]kdb> ss Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 Oops: (null) due to oops @ 0xffff800010082ab8 CPU: 3 PID: 266 Comm: sh Not tainted 5.7.0-rc4-13839-gf0e5ad491718 #6 Hardware name: linux,dummy-virt (DT) pstate: 00000085 (nzcv daIf -PAN -UAO) pc : el1_irq+0x78/0x180 lr : __handle_sysrq+0x80/0x190 sp : ffff800015003bf0 x29: ffff800015003d20 x28: ffff0000fa878040 x27: 0000000000000000 x26: ffff80001126b1f0 x25: ffff800011b6a0d8 x24: 0000000000000000 x23: 0000000080200005 x22: ffff8000101486cc x21: ffff800015003d30 x20: 0000ffffffffffff x19: ffff8000119f2000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800015003e50 x7 : 0000000000000002 x6 : 00000000380b9990 x5 : ffff8000106e99e8 x4 : ffff0000fadd83c0 x3 : 0000ffffffffffff x2 : ffff800011b6a0d8 x1 : ffff800011b6a000 x0 : ffff80001130c9d8 Call trace: el1_irq+0x78/0x180 printk+0x0/0x84 write_sysrq_trigger+0xb0/0x118 proc_reg_write+0xb4/0xe0 __vfs_write+0x18/0x40 vfs_write+0xb0/0x1b8 ksys_write+0x64/0xf0 __arm64_sys_write+0x14/0x20 el0_svc_common.constprop.2+0xb0/0x168 do_el0_svc+0x20/0x98 el0_sync_handler+0xec/0x1a8 el0_sync+0x140/0x180 [3]kdb> After the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> g Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> ss Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to SS trap @ 0xffff800010082ab8 [0]kdb> Fixes: 44679a4f142b ("arm64: KGDB: Add step debugging support") Signed-off-by: Wei Li <liwei391@huawei.com> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200509214159.19680-2-liwei391@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: entry: Tidy up block comments and label numbersWill Deacon1-8/+14
Continually butchering our entry code with CPU errata workarounds has led to it looking a little scruffy. Consistently used /* */ comment style for multi-line block comments and ensure that small numeric labels use consecutive integers. No functional change, but the state of things was irritating. Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: Rework ARM_ERRATUM_1414080 handlingMarc Zyngier1-15/+19
The current handling of erratum 1414080 has the side effect that cntkctl_el1 can get changed for both 32 and 64bit tasks. This isn't a problem so far, but if we ever need to mitigate another of these errata on the 64bit side, we'd better keep the messing with cntkctl_el1 local to 32bit tasks. For that, make sure that on entering the kernel from a 32bit tasks, userspace access to cntvct gets enabled, and disabled returning to userspace, while it never gets changed for 64bit tasks. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200706163802.1836732-5-maz@kernel.org [will: removed branch instructions per Mark's review comments] Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: arch_timer: Allow an workaround descriptor to disable compat vdsoMarc Zyngier1-0/+1
As we are about to disable the vdso for compat tasks in some circumstances, let's allow a workaround descriptor to express exactly that. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200706163802.1836732-3-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: Introduce a way to disable the 32bit vdsoMarc Zyngier2-3/+12
We have a class of errata (grouped under the ARM64_WORKAROUND_1418040 banner) that force the trapping of counter access from 32bit EL0. We would normally disable the whole vdso for such defect, except that it would disable it for 64bit userspace as well, which is a shame. Instead, add a new vdso_clock_mode, which signals that the vdso isn't usable for compat tasks. This gets checked in the new vdso_clocksource_ok() helper, now provided for the 32bit vdso. Signed-off-by: Marc Zyngier <maz@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200706163802.1836732-2-maz@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08arm64: entry: Fix the typo in the comment of el1_dbg()Kevin Hao1-1/+1
The function name should be local_daif_mask(). Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Mark Rutlamd <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20200417103212.45812-2-haokexin@gmail.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08KVM: arm64: Fix definition of PAGE_HYP_DEVICEWill Deacon1-1/+1
PAGE_HYP_DEVICE is intended to encode attribute bits for an EL2 stage-1 pte mapping a device. Unfortunately, it includes PROT_DEVICE_nGnRE which encodes attributes for EL1 stage-1 mappings such as UXN and nG, which are RES0 for EL2, and DBM which is meaningless as TCR_EL2.HD is not set. Fix the definition of PAGE_HYP_DEVICE so that it doesn't set RES0 bits at EL2. Acked-by: Marc Zyngier <maz@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: James Morse <james.morse@arm.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200708162546.26176-1-will@kernel.org Signed-off-by: Will Deacon <will@kernel.org>
2020-07-08KVM: lapic: Use guest_cpuid_has() in kvm_apic_set_version()Xiaoyao Li1-3/+1
Only code cleanup and no functional change. Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20200708065054.19713-8-xiaoyao.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: X86: Go on updating other CPUID leaves when leaf 1 is absentXiaoyao Li1-8/+7
As handling of bits out of leaf 1 added over time, kvm_update_cpuid() should not return directly if leaf 1 is absent, but should go on updateing other CPUID leaves. Keep the update of apic->lapic_timer.timer_mode_mask in a separate wrapper, to minimize churn for code since it will be moved out of this function in a future patch. Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20200708065054.19713-3-xiaoyao.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: X86: Reset vcpu->arch.cpuid_nent to 0 if SET_CPUID* failsXiaoyao Li1-0/+4
Current implementation keeps userspace input of CPUID configuration and cpuid->nent even if kvm_update_cpuid() fails. Reset vcpu->arch.cpuid_nent to 0 for the case of failure as a simple fix. Besides, update the doc to explicitly state that if IOCTL SET_CPUID* fail KVM gives no gurantee that previous valid CPUID configuration is kept. Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> Message-Id: <20200708065054.19713-2-xiaoyao.li@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08kvm: x86: limit the maximum number of vPMU fixed counters to 3Like Xu2-1/+3
Some new Intel platforms (such as TGL) already have the fourth fixed counter TOPDOWN.SLOTS, but it has not been fully enabled on KVM and the host. Therefore, we limit edx.split.num_counters_fixed to 3, so that it does not break the kvm-unit-tests PMU test case and bad-handled userspace. Signed-off-by: Like Xu <like.xu@linux.intel.com> Message-Id: <20200624015928.118614-1-like.xu@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: nSVM: Check that MBZ bits in CR3 and CR4 are not set on vmrun of nested guestsKrish Sadhukhan4-4/+31
According to section "Canonicalization and Consistency Checks" in APM vol. 2 the following guest state is illegal: "Any MBZ bit of CR3 is set." "Any MBZ bit of CR4 is set." Suggeted-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Message-Id: <1594168797-29444-3-git-send-email-krish.sadhukhan@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: x86: Make CR4.VMXE reserved for the guestPaolo Bonzini1-0/+2
CR4.VMXE is reserved unless the VMX CPUID bit is set. On Intel, it is also tested by vmx_set_cr4, but AMD relies on kvm_valid_cr4, so fix it. Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: x86: Create mask for guest CR4 reserved bits in kvm_update_cpuid()Krish Sadhukhan4-22/+25
Instead of creating the mask for guest CR4 reserved bits in kvm_valid_cr4(), do it in kvm_update_cpuid() so that it can be reused instead of creating it each time kvm_valid_cr4() is called. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Message-Id: <1594168797-29444-2-git-send-email-krish.sadhukhan@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08kvm: x86: Read PDPTEs on CR0.CD and CR0.NW changesJim Mattson1-4/+5
According to the SDM, when PAE paging would be in use following a MOV-to-CR0 that modifies any of CR0.CD, CR0.NW, or CR0.PG, then the PDPTEs are loaded from the address in CR3. Previously, kvm only loaded the PDPTEs when PAE paging would be in use following a MOV-to-CR0 that modified CR0.PG. Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Oliver Upton <oupton@google.com> Reviewed-by: Peter Shier <pshier@google.com> Message-Id: <20200707223630.336700-1-jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08xen: Mark "xen_nopvspin" parameter obsoleteZhenzhong Duan1-2/+2
Map "xen_nopvspin" to "nopvspin", fix stale description of "xen_nopvspin" as we use qspinlock now. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08x86/kvm: Add "nopvspin" parameter to disable PV spinlocksZhenzhong Duan2-7/+33
There are cases where a guest tries to switch spinlocks to bare metal behavior (e.g. by setting "xen_nopvspin" on XEN platform and "hv_nopvspin" on HYPER_V). That feature is missed on KVM, add a new parameter "nopvspin" to disable PV spinlocks for KVM guest. The new 'nopvspin' parameter will also replace Xen and Hyper-V specific parameters in future patches. Define variable nopvsin as global because it will be used in future patches as above. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08x86/kvm: Change print code to use pr_*() formatZhenzhong Duan1-9/+13
pr_*() is preferred than printk(KERN_* ...), after change all the print in arch/x86/kernel/kvm.c will have "kvm-guest: xxx" style. No functional change. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08Revert "KVM: X86: Fix setup the virt_spin_lock_key before static key get initialized"Zhenzhong Duan1-9/+3
This reverts commit 34226b6b70980a8f81fff3c09a2c889f77edeeff. Commit 8990cac6e5ea ("x86/jump_label: Initialize static branching early") adds jump_label_init() call in setup_arch() to make static keys initialized early, so we could use the original simpler code again. The similar change for XEN is in commit 090d54bcbc54 ("Revert "x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized"") Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: x86/mmu: Rename page_header() to to_shadow_page()Sean Christopherson3-15/+15
Rename KVM's accessor for retrieving a 'struct kvm_mmu_page' from the associated host physical address to better convey what the function is doing. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200622202034.15093-7-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: x86/mmu: Add sptep_to_sp() helper to wrap shadow page lookupSean Christopherson4-20/+23
Introduce sptep_to_sp() to reduce the boilerplate code needed to get the shadow page associated with a spte pointer, and to improve readability as it's not immediately obvious that "page_header" is a KVM-specific accessor for retrieving a shadow page. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200622202034.15093-6-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: x86/mmu: Make kvm_mmu_page definition and accessor internal-onlySean Christopherson2-44/+50
Make 'struct kvm_mmu_page' MMU-only, nothing outside of the MMU should be poking into the gory details of shadow pages. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200622202034.15093-5-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: x86/mmu: Add MMU-internal headerSean Christopherson4-5/+13
Add mmu/mmu_internal.h to hold declarations and definitions that need to be shared between various mmu/ files, but should not be used by anything outside of the MMU. Begin populating mmu_internal.h with declarations of the helpers used by page_track.c. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200622202034.15093-4-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: x86/mmu: Move kvm_mmu_available_pages() into mmu.cSean Christopherson2-9/+9
Move kvm_mmu_available_pages() from mmu.h to mmu.c, it has a single caller and has no business being exposed via mmu.h. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200622202034.15093-3-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: x86/mmu: Move mmu_audit.c and mmutrace.h into the mmu/ sub-directorySean Christopherson2-1/+1
Move mmu_audit.c and mmutrace.h under mmu/ where they belong. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200622202034.15093-2-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: x86/mmu: Exit to userspace on make_mmu_pages_available() errorSean Christopherson2-2/+4
Propagate any error returned by make_mmu_pages_available() out to userspace instead of resuming the guest if the error occurs while handling a page fault. Now that zapping the oldest MMU pages skips active roots, i.e. fails if and only if there are no zappable pages, there is no chance for a false positive, i.e. no chance of returning a spurious error to userspace. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200623193542.7554-5-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: x86/mmu: Batch zap MMU pages when shrinking the slabSean Christopherson1-16/+1
Use the recently introduced kvm_mmu_zap_oldest_mmu_pages() to batch zap MMU pages when shrinking a slab. This fixes a long standing issue where KVM's shrinker implementation is completely ineffective due to zapping only a single page. E.g. without batch zapping, forcing a scan via drop_caches basically has no impact on a VM with ~2k shadow pages. With batch zapping, the number of shadow pages can be reduced to a few hundred pages in one or two runs of drop_caches. Note, if the default batch size (currently 128) is problematic, e.g. zapping 128 pages holds mmu_lock for too long, KVM can bound the batch size by setting @batch in mmu_shrinker. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200623193542.7554-4-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: x86/mmu: Batch zap MMU pages when recycling oldest pagesSean Christopherson1-13/+39
Collect MMU pages for zapping in a loop when making MMU pages available, and skip over active roots when doing so as zapping an active root can never immediately free up a page. Batching the zapping avoids multiple remote TLB flushes and remedies the issue where the loop would bail early if an active root was encountered. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200623193542.7554-3-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: x86/mmu: Don't put invalid SPs back on the list of active pagesSean Christopherson1-8/+20
Delete a shadow page from the invalidation list instead of throwing it back on the list of active pages when it's a root shadow page with active users. Invalid active root pages will be explicitly freed by mmu_free_root_page() when the root_count hits zero, i.e. they don't need to be put on the active list to avoid leakage. Use sp->role.invalid to detect that a shadow page has already been zapped, i.e. is not on a list. WARN if an invalid page is encountered when zapping pages, as it should now be impossible. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200623193542.7554-2-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: x86/mmu: Optimize MMU page cache lookup for fully direct MMUsSean Christopherson1-2/+7
Skip the unsync checks and the write flooding clearing for fully direct MMUs, which are guaranteed to not have unsync'd or indirect pages (write flooding detection only applies to indirect pages). For TDP, this avoids unnecessary memory reads and writes, and for the write flooding count will also avoid dirtying a cache line (unsync_child_bitmap itself consumes a cache line, i.e. write_flooding_count is guaranteed to be in a different cache line than parent_ptes). Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200623194027.23135-3-sean.j.christopherson@intel.com> Reviewed-By: Jon Cargille <jcargill@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: x86/mmu: Avoid multiple hash lookups in kvm_get_mmu_page()Sean Christopherson1-8/+9
Refactor for_each_valid_sp() to take the list of shadow pages instead of retrieving it from a gfn to avoid doing the gfn->list hash and lookup multiple times during kvm_get_mmu_page(). Cc: Peter Feiner <pfeiner@google.com> Cc: Jon Cargille <jcargill@google.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200623194027.23135-2-sean.j.christopherson@intel.com> Reviewed-By: Jon Cargille <jcargill@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: x86: Use VMCALL and VMMCALL mnemonics in kvm_para.hUros Bizjak1-1/+1
Current minimum required version of binutils is 2.23, which supports VMCALL and VMMCALL instruction mnemonics. Replace the byte-wise specification of VMCALL and VMMCALL with these proper mnemonics. Signed-off-by: Uros Bizjak <ubizjak@gmail.com> CC: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200623183439.5526-1-ubizjak@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: SVM: Rename svm_nested_virtualize_tpr() to nested_svm_virtualize_tpr()Joerg Roedel2-4/+4
Match the naming with other nested svm functions. No functional changes. Signed-off-by: Joerg Roedel <jroedel@suse.de> Message-Id: <20200625080325.28439-5-joro@8bytes.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: SVM: Add svm_ prefix to set/clr/is_intercept()Joerg Roedel3-48/+48
Make clear the symbols belong to the SVM code when they are built-in. No functional changes. Signed-off-by: Joerg Roedel <jroedel@suse.de> Message-Id: <20200625080325.28439-4-joro@8bytes.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: SVM: Add vmcb_ prefix to mark_*() functionsJoerg Roedel5-31/+31
Make it more clear what data structure these functions operate on. No functional changes. Signed-off-by: Joerg Roedel <jroedel@suse.de> Message-Id: <20200625080325.28439-3-joro@8bytes.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: SVM: Rename struct nested_state to svm_nested_stateJoerg Roedel1-2/+2
Renaming is only needed in the svm.h header file. No functional changes. Signed-off-by: Joerg Roedel <jroedel@suse.de> Message-Id: <20200625080325.28439-2-joro@8bytes.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-08KVM: nVMX: Wrap VM-Fail valid path in generic VM-Fail helperSean Christopherson1-41/+36
Add nested_vmx_fail() to wrap VM-Fail paths that _may_ result in VM-Fail Valid to make it clear at the call sites that the Valid flavor isn't guaranteed. Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200609015607.6994-1-sean.j.christopherson@intel.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>