| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add the base video decoder node compatible with the meson vdec driver,
for GX* chips.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
If unspecified in DT, the fifo sizes are not automatically detected by
the dwmac1000 dma driver and the reported fifo sizes default to 0.
Because of this, flow control will be turned off on the device.
Add the fifo sizes provided by the datasheets in the SoC in DT so
flow control may be enabled if necessary.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Add the OPP table taken from the HardKernel Odroid-N2 DTS.
The Amlogic G12B SoC seems to available in 2 types :
- low-speed: Cortex-A73 Cluster up to 1,704GHz
- high-speed: Cortex-A73 Cluster up to 2.208GHz
The Cortex-A73 Cluster can be clocked up to 1,896GHz for both types.
The Vendor Amlogic A311D OPP table are slighly different, with lower
voltages than the HardKernel S922X tables but seems to be high-speed type.
This adds the conservative OPP table with the S922X higher voltages
and the maximum low-speed OPP frequency.
The values were tested to be stable on an HardKernel Odroid-N2 board
running the arm64 cpuburn at [1] and cycling between all the possible
cpufreq translations for both clusters and checking the final frequency
using the clock-measurer, script at [2].
[1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S
[2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Enable DVFS for the U200, SEI520 and X96-Max Amlogic G12A based board
by setting the clock, OPP and supply for each CPU cores.
The CPU cluster power supply can achieve 0.73V to 1.01V using a PWM
output clocked at 800KHz with an inverse duty-cycle.
DVFS has been tested by running the arm64 cpuburn at [1] and cycling
between all the possible cpufreq translations and checking the final
frequency using the clock-measurer, script at [2].
[1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S
[2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Add the OPP table taken from the vendor u200 and u211 DTS.
The Amlogic G12A SoC seems to available in 3 types :
- low-speed: up to 1,8GHz
- mid-speed: up to 1,908GHz
- high-speed: up to 2.1GHz
And the S905X2 opp voltages are slightly higher than the S905D2
OPP voltages for the low-speed table.
This adds the conservative OPP table with the S905X2 higher voltages
and the maximum low-speed OPP frequency.
The values were tested to be stable on an Amlogic U200 Reference Board,
SeiRobotics SEI510 and X96 Max Set-Top-Boxes running the arm64 cpuburn
at [1] and cycling between all the possible cpufreq translations and
checking the final frequency using the clock-measurer, script at [2].
[1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S
[2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Add the ao_pinctrl subnode for the pwm_a function on GPIOE_2.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
To simplify the representation of differences betweem the G12A and G12B
SoCs, move the common nodes into a meson-g12-common.dtsi file and
express the CPU nodes and differences in meson-g12a.dtsi and meson-g12b.dtsi.
This separation will help for DVFS and future Amlogic SM1 Family support.
The sd_emmc_a quirk is added in the g12a/g12b since since it's already
known the sd_emmc_a controller is fixed in the next SM1 SoC family.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Current PSCI code handles idle state entry through the
psci_cpu_suspend_enter() API, that takes an idle state index as a
parameter and convert the index into a previously initialized
power_state parameter before calling the PSCI.CPU_SUSPEND() with it.
This is unwieldly, since it forces the PSCI firmware layer to keep track
of power_state parameter for every idle state so that the
index->power_state conversion can be made in the PSCI firmware layer
instead of the CPUidle driver implementations.
Move the power_state handling out of drivers/firmware/psci
into the respective ACPI/DT PSCI CPUidle backends and convert
the psci_cpu_suspend_enter() API to get the power_state
parameter as input, which makes it closer to its firmware
interface PSCI.CPU_SUSPEND() API.
A notable side effect is that the PSCI ACPI/DT CPUidle backends
now can directly handle (and if needed update) power_state
parameters before handing them over to the PSCI firmware
interface to trigger PSCI.CPU_SUSPEND() calls.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Allow selection of the PSCI CPUidle in the kernel by updating
the respective Kconfig entry.
Remove PSCI callbacks from ARM/ARM64 generic CPU ops
to prevent the PSCI idle driver from clashing with the generic
ARM CPUidle driver initialization, that relies on CPU ops
to initialize and enter idle states.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Pull arm64 fix from Catalin Marinas:
"Fix bad_pte warning caused by pte_mkdevmap() not setting PTE_SPECIAL"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: add missing PTE_SPECIAL in pte_mkdevmap on arm64
|
|
Pull s390 fixes from Vasily Gorbik:
- Map vdso also for statically linked binaries like all other
architectures.
- Fix no .bss usage compile-time check to account common objects with
the help of binutils size tool. Top level Makefile change acked-by
Masahiro.
- A fix to make perf happy with _etext symbol type.
- Fix dump_pagetables which is broken since p*d_offset implementation
change to comply with mm/gup.c expectations.
- Revert memory sharing for diag calls in protected virtualization,
since this is not required after all.
- Couple of other minor code cleanups.
* tag 's390-5.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vdso: map vdso also for statically linked binaries
s390/build: use size command to perform empty .bss check
kbuild: add OBJSIZE variable for the size tool
s390: put _stext and _etext into .text section
s390/head64: cleanup unused labels
s390/unwind: remove stack recursion warning
s390/setup: adjust start_code of init_mm to _text
s390/mm: fix dump_pagetables top level page table walking
s390/protvirt: avoid memory sharing for diag 308 set/store
|
|
Support has been added to the OMAP IOMMU driver to fix a boot hang
issue on OMAP remoteprocs with AMMU/Unicache, caused by an improper
AMMU/Unicache state upon initial deassertion of the processor reset.
The issue is described in detail in the next three paragraphs.
All the Cortex M3/M4 IPU processor subsystems in OMAP SoCs have a
AMMU/Unicache IP that dictates the memory attributes for addresses
seen by the processor cores. The AMMU/Unicache is configured/enabled
by the SCACHE_CONFIG.BYPASS bit - a value of 1 enables the cache and
mandates all addresses accessed by M3/M4 be defined in the AMMU. This
bit is not programmable from the host processor. The M3/M4 boot
sequence starts out with the AMMU/Unicache in disabled state, and
SYS/BIOS programs the AMMU regions and enables the Unicache during
one of its initial boot steps. This SCACHE_CONFIG.BYPASS bit is
however enabled by default whenever a RET reset is applied to the IP,
irrespective of whether it was previously enabled or not. The AMMU
registers lose their context whenever this reset is applied. The reset
is effective as long as the MMU portion of the subsystem is enabled
and clocked. This behavior is common to all the IPU and DSP subsystems
that have an AMMU/Unicache.
The IPU boot sequence involves enabling and programming the MMU, and
loading the processor and releasing the reset(s) for the processor.
The PM setup code currently sets the target state for most of the
power domains to RET. The L2 MMU can be enabled, programmed and
accessed properly just fine with the domain in hardware supervised
mode, while the power domain goes through a RET->ON->RET transition
during the programming sequence. However, the ON->RET transition
asserts a RET reset, and the SCACHE_CONFIG.BYPASS bit gets auto-set.
An AMMU fault is thrown immediately when the M3/M4 core's reset is
released since the first instruction address itself will not be
defined in any valid AMMU regions. The ON->RET transition happens
automatically on the power domain after enabling the iommu due to
the hardware supervised mode.
This patch adds and invokes the .set_pwrdm_constraint pdata ops, if
present, during the OMAP IOMMU enable and disable functions to resolve
the above boot hang issue. The ops will allow to invoke a mach-omap2
layer API pwrdm_set_next_pwrst() in a multi-arch kernel environment.
The ops also returns the current power domain state while enforcing
the constraint so that the driver can store it and use it to set back
the power domain state while releasing the constraint. The pdata ops
implementation restricts the target power domain to ON during enable,
and back to the original power domain state during disable, and thereby
eliminating the conditions for the boot issue. The implementation is
effective only when the original power domain state is either RET or
OFF, and is a no-op when it is ON or INACTIVE.
The .set_pwrdm_constraint ops need to be plugged in pdata-quirks
for the affected remote processors to be able to boot properly.
Note that the current issue is seen only on kernels with the affected
power domains programmed to enter RET. For eg., IPU1 on DRA7xx is in a
separate domain and is susceptible to this bug, while the IPU2 subsystem
is within CORE power domain, and CORE RET is not supported on this SoC.
IPUs on OMAP4 and OMAP5 are also susceptible since they are in CORE power
domain, and CORE RET is a valid power target on these SoCs.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
KVM/arm fixes for 5.3, take #2
- Fix our system register reset so that we stop writing
non-sensical values to them, and track which registers
get reset instead.
- Sync VMCR back from the GIC on WFI so that KVM has an
exact vue of PMR.
- Reevaluate state of HW-mapped, level triggered interrupts
on enable.
|
|
KVM/arm fixes for 5.3
- A bunch of switch/case fall-through annotation, fixing one actual bug
- Fix PMU reset bug
- Add missing exception class debug strings
|
|
untagged_addr() can be called with a '__user' pointer parameter and must
therefore use '__force' casts both when passing this parameter through
to sign_extend64() as a 'u64', but also when casting the 's64' return
value back to the '__user' pointer type.
Signed-off-by: Will Deacon <will@kernel.org>
|
|
_virt_addr_valid() is defined as the same value in two places and rolls
its own version of virt_to_pfn() in both cases.
Consolidate these definitions by inlining a simplified version directly
into virt_addr_valid().
Signed-off-by: Will Deacon <will@kernel.org>
|
|
All references to sev_active() were moved to arch/x86 so we don't need to
define it for s390 anymore.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190806044919.10622-7-bauerman@linux.ibm.com
|
|
Secure Encrypted Virtualization is an x86-specific feature, so it shouldn't
appear in generic kernel code because it forces non-x86 architectures to
define the sev_active() function, which doesn't make a lot of sense.
To solve this problem, add an x86 elfcorehdr_read() function to override
the generic weak implementation. To do that, it's necessary to make
read_from_oldmem() public so that it can be used outside of vmcore.c.
Also, remove the export for sev_active() since it's only used in files that
won't be built as modules.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190806044919.10622-6-bauerman@linux.ibm.com
|
|
Now that generic code doesn't reference them, move sme_active() and
sme_me_mask to x86's <asm/mem_encrypt.h>.
Also remove the export for sme_active() since it's only used in files that
won't be built as modules. sme_me_mask on the other hand is used in
arch/x86/kvm/svm.c (via __sme_set() and __psp_pa()) which can be built as a
module so its export needs to stay.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190806044919.10622-5-bauerman@linux.ibm.com
|
|
powerpc is also going to use this feature, so put it in a generic location.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190806044919.10622-2-bauerman@linux.ibm.com
|
|
Previous patches have enabled 52-bit kernel + user VAs and there is no
longer any scenario where user VA != kernel VA size.
This patch removes the, now redundant, vabits_user variable and replaces
usage with vabits_actual where appropriate.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Most of the machinery is now in place to enable 52-bit kernel VAs that
are detectable at boot time.
This patch adds a Kconfig option for 52-bit user and kernel addresses
and plumbs in the requisite CONFIG_ macros as well as sets TCR.T1SZ,
physvirt_offset and vmemmap at early boot.
To simplify things this patch also removes the 52-bit user/48-bit kernel
kconfig option.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In a later patch we will need to have a slightly larger VMEMMAP region
to accommodate boot time selection between 48/52-bit kernel VAs.
This patch modifies the formula for computing VMEMMAP_SIZE to depend
explicitly on the PAGE_OFFSET and start of kernel addressable memory.
(This allows for a slightly larger direct linear map in future).
Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
vmemmap is a preprocessor definition that depends on a variable,
memstart_addr. In a later patch we will need to expand the size of
the VMEMMAP region and optionally modify vmemmap depending upon
whether or not hardware support is available for 52-bit virtual
addresses.
This patch changes vmemmap to be a variable. As the old definition
depended on a variable load, this should not affect performance
noticeably.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When running with a 52-bit userspace VA and a 48-bit kernel VA we offset
ttbr1_el1 to allow the kernel pagetables with a 52-bit PTRS_PER_PGD to
be used for both userspace and kernel.
Moving on to a 52-bit kernel VA we no longer require this offset to
ttbr1_el1 should we be running on a system with HW support for 52-bit
VAs.
This patch introduces conditional logic to offset_ttbr1 to query
SYS_ID_AA64MMFR2_EL1 whenever 52-bit VAs are selected. If there is HW
support for 52-bit VAs then the ttbr1 offset is skipped.
We choose to read a system register rather than vabits_actual because
offset_ttbr1 can be called in places where the kernel data is not
actually mapped.
Calls to offset_ttbr1 appear to be made from rarely called code paths so
this extra logic is not expected to adversely affect performance.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In order to support 52-bit kernel addresses detectable at boot time, one
needs to know the actual VA_BITS detected. A new variable vabits_actual
is introduced in this commit and employed for the KVM hypervisor layout,
KASAN, fault handling and phys-to/from-virt translation where there
would normally be compile time constants.
In order to maintain performance in phys_to_virt, another variable
physvirt_offset is introduced.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In order to support 52-bit kernel addresses detectable at boot time, the
kernel needs to know the most conservative VA_BITS possible should it
need to fall back to this quantity due to lack of hardware support.
A new compile time constant VA_BITS_MIN is introduced in this patch and
it is employed in the KASAN end address, KASLR, and EFI stub.
For Arm, if 52-bit VA support is unavailable the fallback is to 48-bits.
In other words: VA_BITS_MIN = min (48, VA_BITS)
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The kernel page table dumper assumes that the placement of VA regions is
constant and determined at compile time. As we are about to introduce
variable VA logic, we need to be able to determine certain regions at
boot time.
Specifically the VA_START and KASAN_SHADOW_START will depend on whether
or not the system is booted with 52-bit kernel VAs.
This patch adds logic to the kernel page table dumper s.t. these regions
can be computed at boot time.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
KASAN_SHADOW_OFFSET is a constant that is supplied to gcc as a command
line argument and affects the codegen of the inline address sanetiser.
Essentially, for an example memory access:
*ptr1 = val;
The compiler will insert logic similar to the below:
shadowValue = *(ptr1 >> KASAN_SHADOW_SCALE_SHIFT + KASAN_SHADOW_OFFSET)
if (somethingWrong(shadowValue))
flagAnError();
This code sequence is inserted into many places, thus
KASAN_SHADOW_OFFSET is essentially baked into many places in the kernel
text.
If we want to run a single kernel binary with multiple address spaces,
then we need to do this with KASAN_SHADOW_OFFSET fixed.
Thankfully, due to the way the KASAN_SHADOW_OFFSET is used to provide
shadow addresses we know that the end of the shadow region is constant
w.r.t. VA space size:
KASAN_SHADOW_END = ~0 >> KASAN_SHADOW_SCALE_SHIFT + KASAN_SHADOW_OFFSET
This means that if we increase the size of the VA space, the start of
the KASAN region expands into lower addresses whilst the end of the
KASAN region is fixed.
Currently the arm64 code computes KASAN_SHADOW_OFFSET at build time via
build scripts with the VA size used as a parameter. (There are build
time checks in the C code too to ensure that expected values are being
derived). It is sufficient, and indeed is a simplification, to remove
the build scripts (and build time checks) entirely and instead provide
KASAN_SHADOW_OFFSET values.
This patch removes the logic to compute the KASAN_SHADOW_OFFSET in the
arm64 Makefile, and instead we adopt the approach used by x86 to supply
offset values in kConfig. To help debug/develop future VA space changes,
the Makefile logic has been preserved in a script file in the arm64
Documentation folder.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In order to allow for a KASAN shadow that changes size at boot time, one
must fix the KASAN_SHADOW_END for both 48 & 52-bit VAs and "grow" the
start address. Also, it is highly desirable to maintain the same
function addresses in the kernel .text between VA sizes. Both of these
requirements necessitate us to flip the kernel address space halves s.t.
the direct linear map occupies the lower addresses.
This patch puts the direct linear map in the lower addresses of the
kernel VA range and everything else in the higher ranges.
We need to adjust:
*) KASAN shadow region placement logic,
*) KASAN_SHADOW_OFFSET computation logic,
*) virt_to_phys, phys_to_virt checks,
*) page table dumper.
These are all small changes, that need to take place atomically, so they
are bundled into this commit.
As part of the re-arrangement, a guard region of 2MB (to preserve
alignment for fixed map) is added after the vmemmap. Otherwise the
vmemmap could intersect with IS_ERR pointers.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently there are assumptions about the alignment of VMEMMAP_START
and PAGE_OFFSET that won't be valid after this series is applied.
These assumptions are in the form of bitwise operators being used
instead of addition and subtraction when calculating addresses.
This patch replaces these bitwise operators with addition/subtraction.
Signed-off-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
s390 does not map the vdso for statically linked binaries, assuming
that this doesn't make sense. See commit fc5243d98ac2 ("[S390]
arch_setup_additional_pages arguments").
However with glibc commit d665367f596d ("linux: Enable vDSO for static
linking as default (BZ#19767)") and commit 5e855c895401 ("s390: Enable
VDSO for static linking") the vdso is also used for statically linked
binaries - if the kernel would make it available.
Therefore map the vdso always, just like all other architectures.
Reported-by: Stefan Liebler <stli@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
At the moment, the way we reset CP15 registers is mildly insane:
We write junk to them, call the reset functions, and then check that
we have something else in them.
The "fun" thing is that this can happen while the guest is running
(PSCI, for example). If anything in KVM has to evaluate the state
of a CP15 register while junk is in there, bad thing may happen.
Let's stop doing that. Instead, we track that we have called a
reset function for that register, and assume that the reset
function has done something.
In the end, the very need of this reset check is pretty dubious,
as it doesn't check everything (a lot of the CP15 reg leave outside
of the cp15_regs[] array). It may well be axed in the near future.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
At the moment, the way we reset system registers is mildly insane:
We write junk to them, call the reset functions, and then check that
we have something else in them.
The "fun" thing is that this can happen while the guest is running
(PSCI, for example). If anything in KVM has to evaluate the state
of a system register while junk is in there, bad thing may happen.
Let's stop doing that. Instead, we track that we have called a
reset function for that register, and assume that the reset
function has done something. This requires fixing a couple of
sysreg refinition in the trap table.
In the end, the very need of this reset check is pretty dubious,
as it doesn't check everything (a lot of the sysregs leave outside of
the sys_regs[] array). It may well be axed in the near future.
Tested-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
This should never have landed in the first place: it was added as part
of 64-bit divide support for 32-bit systems, but the kernel doesn't
allow this sort of division. I must have forgotten to remove it.
This patch removes the support. Since this routine only worked on
64-bit platforms but was only built on 32-bit platforms, it's
essentially just nonsense anyway.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Link: https://lore.kernel.org/linux-riscv/nycvar.YSQ.7.76.1908061413360.19480@knanqh.ubzr/T/#t
Reported-by: Eric Lin <tesheng@andestech.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
In preparation for removing __udivdi3() from the RISC-V
architecture-specific files, convert its one user to use do_div().
This avoids breaking the RV32 build after __udivdi3() is removed.
This second version removes the assignment of the remainder to an
unused temporary variable. Thanks to Nicolas Pitre <nico@fluxnic.net>
for the suggestion.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
|
|
Merge the Ingenic TCU patchset from the ingenic-tcu-v5.4 branch which
was created to enable follow-on changes in other subsystems.
Signed-off-by: Paul Burton <paul.burton@mips.com>
|
|
The old clocksource/timer platform code is now obsoleted by the newly
introduced TCU drivers.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: od@zcrc.me
|
|
The default clock (12 MHz) is too fast for the system timer.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: od@zcrc.me
|
|
The default clock (48 MHz) is too fast for the system timer.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: od@zcrc.me
|
|
The default clock (12 MHz) is too fast for the system timer, which fails
to report time accurately.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: od@zcrc.me
|
|
Add DTS nodes for the JZ4780, JZ4770 and JZ4740 devicetree files.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: od@zcrc.me
|
|
Convert pci_resource_to_user() to a weak function so the existing
architecture-specific implementations will automatically override the
generic one. This allows us to remove HAVE_ARCH_PCI_RESOURCE_TO_USER
definitions and avoid the conditional compilation for this single function.
Link: https://lore.kernel.org/r/20190729101401.28068-1-efremov@linux.com
Link: https://lore.kernel.org/r/20190729101401.28068-2-efremov@linux.com
Link: https://lore.kernel.org/r/20190729101401.28068-3-efremov@linux.com
Link: https://lore.kernel.org/r/20190729101401.28068-4-efremov@linux.com
Link: https://lore.kernel.org/r/20190729101401.28068-5-efremov@linux.com
Link: https://lore.kernel.org/r/20190729101401.28068-6-efremov@linux.com
Signed-off-by: Denis Efremov <efremov@linux.com>
[bhelgaas: squash into one commit]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Paul Burton <paul.burton@mips.com> # MIPS
|
|
Without this patch, the MAP_SYNC test case will cause a print_bad_pte
warning on arm64 as follows:
[ 25.542693] BUG: Bad page map in process mapdax333 pte:2e8000448800f53 pmd:41ff5f003
[ 25.546360] page:ffff7e0010220000 refcount:1 mapcount:-1 mapping:ffff8003e29c7440 index:0x0
[ 25.550281] ext4_dax_aops
[ 25.550282] name:"__aaabbbcccddd__"
[ 25.551553] flags: 0x3ffff0000001002(referenced|reserved)
[ 25.555802] raw: 03ffff0000001002 ffff8003dfffa908 0000000000000000 ffff8003e29c7440
[ 25.559446] raw: 0000000000000000 0000000000000000 00000001fffffffe 0000000000000000
[ 25.563075] page dumped because: bad pte
[ 25.564938] addr:0000ffffbe05b000 vm_flags:208000fb anon_vma:0000000000000000 mapping:ffff8003e29c7440 index:0
[ 25.574272] file:__aaabbbcccddd__ fault:ext4_dax_fault mmmmap:ext4_file_mmap readpage:0x0
[ 25.578799] CPU: 1 PID: 1180 Comm: mapdax333 Not tainted 5.2.0+ #21
[ 25.581702] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 25.585624] Call trace:
[ 25.587008] dump_backtrace+0x0/0x178
[ 25.588799] show_stack+0x24/0x30
[ 25.590328] dump_stack+0xa8/0xcc
[ 25.591901] print_bad_pte+0x18c/0x218
[ 25.593628] unmap_page_range+0x778/0xc00
[ 25.595506] unmap_single_vma+0x94/0xe8
[ 25.597304] unmap_vmas+0x90/0x108
[ 25.598901] unmap_region+0xc0/0x128
[ 25.600566] __do_munmap+0x284/0x3f0
[ 25.602245] __vm_munmap+0x78/0xe0
[ 25.603820] __arm64_sys_munmap+0x34/0x48
[ 25.605709] el0_svc_common.constprop.0+0x78/0x168
[ 25.607956] el0_svc_handler+0x34/0x90
[ 25.609698] el0_svc+0x8/0xc
[...]
The root cause is in _vm_normal_page, without the PTE_SPECIAL bit,
the return value will be incorrectly set to pfn_to_page(pfn) instead
of NULL. Besides, this patch also rewrite the pmd_mkdevmap to avoid
setting PTE_SPECIAL for pmd
The MAP_SYNC test case is as follows(Provided by Yibo Cai)
$#include <stdio.h>
$#include <string.h>
$#include <unistd.h>
$#include <sys/file.h>
$#include <sys/mman.h>
$#ifndef MAP_SYNC
$#define MAP_SYNC 0x80000
$#endif
/* mount -o dax /dev/pmem0 /mnt */
$#define F "/mnt/__aaabbbcccddd__"
int main(void)
{
int fd;
char buf[4096];
void *addr;
if ((fd = open(F, O_CREAT|O_TRUNC|O_RDWR, 0644)) < 0) {
perror("open1");
return 1;
}
if (write(fd, buf, 4096) != 4096) {
perror("lseek");
return 1;
}
addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED|MAP_SYNC, fd, 0);
if (addr == MAP_FAILED) {
perror("mmap");
printf("did you mount with '-o dax'?\n");
return 1;
}
memset(addr, 0x55, 4096);
if (munmap(addr, 4096) == -1) {
perror("munmap");
return 1;
}
close(fd);
return 0;
}
Fixes: 73b20c84d42d ("arm64: mm: implement pte_devmap support")
Reported-by: Yibo Cai <Yibo.Cai@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Robin Murphy <Robin.Murphy@arm.com>
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently empty .bss checks performed do not pay attention to "common
objects" in object files which end up in .bss section eventually.
The "size" tool is a part of binutils and since version 2.18 provides
"--common" command line option, which allows to account "common objects"
sizes in .bss section size. Utilize "size --common" to perform accurate
check that .bss section is unused. Besides that the size tool handles
object files without .bss section gracefully and doesn't require
additional objdump run.
The linux kernel requires binutils 2.20 since 4.13.
Kbuild exports OBJSIZE to reference the right size tool.
Link: http://lkml.kernel.org/r/patch-2.thread-2257a1.git-2257a1c53d4a.your-ad-here.call-01565088755-ext-5120@work.hours
Reported-and-tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
System firmware advertises the address of the 'Runtime
Configuration Interface table version 2 (RCI2)' via
an EFI Configuration Table entry. This code retrieves the RCI2
table from the address and exports it to sysfs as a binary
attribute 'rci2' under /sys/firmware/efi/tables directory.
The approach adopted is similar to the attribute 'DMI' under
/sys/firmware/dmi/tables.
RCI2 table contains BIOS HII in XML format and is used to populate
BIOS setup page in Dell EMC OpenManage Server Administrator tool.
The BIOS setup page contains BIOS tokens which can be configured.
Signed-off-by: Narendra K <Narendra.K@dell.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
The SAL systab is an Itanium specific EFI configuration table, so
move its handling into arch/ia64 where it belongs.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
The SGI UV UEFI machines are tightly coupled to the x86 architecture
so there is no need to keep any awareness of its existence in the
generic EFI layer, especially since we already have the infrastructure
to handle arch-specific configuration tables, and were even already
using it to some extent.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
The function efi_is_table_address() and the associated array of table
pointers is specific to x86. Since we will be adding some more x86
specific tables, let's move this code out of the generic code first.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
|
|
When building with W=1, warnings about missing prototypes are emitted:
CC arch/x86/lib/cpu.o
arch/x86/lib/cpu.c:5:14: warning: no previous prototype for 'x86_family' [-Wmissing-prototypes]
5 | unsigned int x86_family(unsigned int sig)
| ^~~~~~~~~~
arch/x86/lib/cpu.c:18:14: warning: no previous prototype for 'x86_model' [-Wmissing-prototypes]
18 | unsigned int x86_model(unsigned int sig)
| ^~~~~~~~~
arch/x86/lib/cpu.c:33:14: warning: no previous prototype for 'x86_stepping' [-Wmissing-prototypes]
33 | unsigned int x86_stepping(unsigned int sig)
| ^~~~~~~~~~~~
Add the proper include file so the prototypes are there.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/42513.1565234837@turing-police
|
Maxime Jourdan
Jerome Brunet
Neil Armstrong
Lorenzo Pieralisi
Linus Torvalds
Suman Anna
Paolo Bonzini
Will Deacon
Thiago Jung Bauermann
Steve Capper
Heiko Carstens
Marc Zyngier
Palmer Dabbelt
Paul Walmsley
Paul Burton
Paul Cercueil
Denis Efremov
Jia He
Vasily Gorbik
Narendra K
Ard Biesheuvel
Valdis Klētnieks