aboutsummaryrefslogtreecommitdiffstats
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2022-05-07ARM: pxa: remove unused mach/bitfield.hArnd Bergmann2-116/+0
The sa1111.h header defines some constants using the bitfield macros, but those are only used on sa1100, not on pxa, and the users include the bitfield header through mach/hardware.h. Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: move clk register definitions to driverArnd Bergmann5-121/+7
The clock register definitions are now used (almost) exclusively in the clk driver, and that relies on no other mach/*.h header files any more. Remove the dependency on mach/pxa*-regs.h by addressing the registers as offsets from a void __iomem * pointer, which is either passed from a board file, or (for the moment) ioremapped at boot time from a hardcoded address in case of DT (this should be moved into the DT of course). Cc: linux-clk@vger.kernel.org Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: move smemc register access from clk to platformArnd Bergmann4-0/+46
The get_sdram_rows() and get_memclkdiv() helpers need smemc register that are separate from the clk registers, move them out of the clk driver, and use an extern declaration instead. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Link: https://lore.kernel.org/lkml/87pnielzo4.fsf@belgarion.home/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07cpufreq: pxa3: move clk register access to clk driverArnd Bergmann3-6/+1
The driver needs some low-level register access for setting the core and bus frequencies. These registers are owned by the clk driver, so move the low-level access into that driver with a slightly higher-level interface and avoid any machine header file dependencies. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: remove get_clk_frequency_khz()Arnd Bergmann3-17/+1
get_clk_frequency_khz() is not a proper name for a global function, and there is only one caller. Convert viper to use the properly namespaced pxa25x_get_clk_frequency_khz() and remove the other references. Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: linux-pm@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: pcmcia: move smemc configuration back to archArnd Bergmann1-0/+29
Rather than poking at the smemc registers directly from the pcmcia/pxa2xx_base driver, move those bits into machine file to have a cleaner interface. Cc: Dominik Brodowski <linux@dominikbrodowski.net> Link: https://lore.kernel.org/lkml/87d0egjzxk.fsf@belgarion.home/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ASoC: pxa: ac97: use normal MMIO accessorsArnd Bergmann1-102/+0
To avoid dereferencing hardwired constant pointers from a global header file, change the driver to use devm_platform_ioremap_resource for getting an __iomem pointer, and then using readl/writel on that. Each pointer dereference gets changed by a search&replace, which leads to a few overlong lines, but seems less risky than trying to clean up the code at the same time. Cc: alsa-devel@alsa-project.org Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07Input: wm97xx - get rid of irq_enable method in wm97xx_mach_opsDmitry Torokhov1-9/+0
Now that we are using oneshot threaded IRQ this method is not used anymore. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [arnd: add the db1300 change as well] Cc: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: zylonite: use gpio lookup instead mfp headerArnd Bergmann1-0/+31
The mach/mfp.h header is only used by this one driver for hardcoded gpio numbers. Change that to use a lookup table instead. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: mainstone-wm97xx: use gpio lookup tableArnd Bergmann4-0/+36
This driver hardcodes gpio numbers without a header file. Use lookup tables instead. Cc: Marek Vasut <marek.vasut@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: linux-input@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: magician: use platform driver for audioArnd Bergmann1-0/+50
The magician audio driver creates a codec device and gets data from a board specific header file, both of which is a bit suspicious. Move these into the board file itself, using a gpio lookup table. Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: alsa-devel@alsa-project.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: z2: use gpio lookup for audio deviceArnd Bergmann1-0/+11
The audio device is allocated by the audio driver, and it uses a gpio number from the mach/z2.h header file. Change it to use a gpio lookup table for the device allocated by the driver to keep the header file local to the machine. Acked-by: Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: eseries: use gpio lookup for audioArnd Bergmann1-0/+32
The three eseries machines have very similar drivers for audio, all using the mach/eseries-gpio.h header for finding the gpio numbers. Change these to use gpio descriptors to avoid the header file dependency. I convert the _OFF gpio numbers into GPIO_ACTIVE_LOW ones for consistency here. Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: spitz: use gpio descriptors for audioArnd Bergmann3-3/+34
The audio driver should not use a hardwired gpio number from the header. Change it to use a lookup table. Acked-by: Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: lubbock: pass udc irqs as resourceArnd Bergmann2-3/+11
Lubbock is the only machine that has three IRQs for the UDC. These are currently hardcoded in the driver based on a machine header file. Change this to use platform device resources as we use for the generic IRQ anyway. Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: hx4700: use gpio descriptors for audioArnd Bergmann3-3/+17
The audio driver should not use a hardwired gpio number from the header. Change it to use a lookup table. Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Paul Parsons <lost.distance@yahoo.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: corgi: use gpio descriptors for audioArnd Bergmann3-3/+23
The audio driver should not use a hardwired gpio number from the header. Change it to use a lookup table. Acked-by: Mark Brown <broonie@kernel.org> Cc: alsa-devel@alsa-project.org Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: poodle: use platform data for poodle asoc driverArnd Bergmann2-13/+21
The poodle audio driver shows its age by using a custom gpio api for the "locomo" support chip. In a perfect world, this would get converted to use gpiolib and a gpio lookup table. As the world is not perfect, just pass all the required data in a custom platform_data structure. to avoid the globally visible mach/poodle.h header. Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: alsa-devel@alsa-project.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM/pxa/mfd/power/sound: Switch Tosa to GPIO descriptorsLinus Walleij3-70/+18
The Tosa device (Sharp SL-6000) has a mishmash driver set-up for the Toshiba TC6393xb MFD that includes a battery charger and touchscreen and has some kind of relationship to the SoC sound driver for the AC97 codec. Other devices define a chip like this but seem only half-implemented, not really handling battery charging etc. This patch switches the Toshiba MFD device to provide GPIO descriptors to the battery charger and SoC codec. As a result some descriptors need to be moved out of the Tosa boardfile and new one added: all SoC GPIO resources to these drivers now comes from the main boardfile, while the MFD provide GPIOs for its portions. As a result we can request one GPIO from our own GPIO chip and drop two hairy callbacks into the board file. This platform badly needs to have its drivers split up and converted to device tree probing to handle this quite complex relationship in an orderly manner. I just do my best in solving the GPIO descriptor part of the puzzle. Please don't ask me to fix everything that is wrong with these driver to todays standards, I am just trying to fix one aspect. I do try to use modern devres resource management and handle deferred probe using new functions where appropriate. Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Dirk Opfer <dirk@opfer-online.de> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Daniel Mack <daniel@zonque.org> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Reviewed-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07arm64: kdump: Reimplement crashkernel=XChen Zhou3-10/+74
There are following issues in arm64 kdump: 1. We use crashkernel=X to reserve crashkernel in DMA zone, which will fail when there is not enough low memory. 2. If reserving crashkernel above DMA zone, in this case, crash dump kernel will fail to boot because there is no low memory available for allocation. To solve these issues, introduce crashkernel=X,[high,low]. The "crashkernel=X,high" is used to select a region above DMA zone, and the "crashkernel=Y,low" is used to allocate specified size low memory. Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Co-developed-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20220506114402.365-4-thunder.leizhen@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-07arm64: Use insert_resource() to simplify codeZhen Lei2-14/+4
insert_resource() traverses the subtree layer by layer from the root node until a proper location is found. Compared with request_resource(), the parent node does not need to be determined in advance. In addition, move the insertion of node 'crashk_res' into function reserve_crashkernel() to make the associated code close together. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: John Donnelly <john.p.donnelly@oracle.com> Acked-by: Baoquan He <bhe@redhat.com> Link: https://lore.kernel.org/r/20220506114402.365-3-thunder.leizhen@huawei.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2022-05-08ia64: make the install target not depend on any build artifactMasahiro Yamada1-2/+2
The install target should not depend on any build artifact. The reason is explained in commit 19514fc665ff ("arm, kbuild: make "make install" not depend on vmlinux"). Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-05-08kbuild: drop $(objtree)/ prefix support for clean-filesMasahiro Yamada1-2/+2
I think this hack is a bad idea. arch/powerpc/boot/Makefile is the only and last user. Let's stop doing this. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
2022-05-07fork: Generalize PF_IO_WORKER handlingEric W. Biederman26-108/+85
Add fn and fn_arg members into struct kernel_clone_args and test for them in copy_thread (instead of testing for PF_KTHREAD | PF_IO_WORKER). This allows any task that wants to be a user space task that only runs in kernel mode to use this functionality. The code on x86 is an exception and still retains a PF_KTHREAD test because x86 unlikely everything else handles kthreads slightly differently than user space tasks that start with a function. The functions that created tasks that start with a function have been updated to set ".fn" and ".fn_arg" instead of ".stack" and ".stack_size". These functions are fork_idle(), create_io_thread(), kernel_thread(), and user_mode_thread(). Link: https://lkml.kernel.org/r/20220506141512.516114-4-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-05-07fork: Explicity test for idle tasks in copy_threadEric W. Biederman2-2/+2
The architectures ia64 and parisc have special handling for the idle thread in copy_process. Add a flag named idle to kernel_clone_args and use it to explicity test if an idle process is being created. Fullfill the expectations of the rest of the copy_thread implemetations and pass a function pointer in .stack from fork_idle(). This makes what is happening in copy_thread better defined, and is useful to make idle threads less special. Link: https://lkml.kernel.org/r/20220506141512.516114-3-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-05-07fork: Pass struct kernel_clone_args into copy_threadEric W. Biederman23-54/+113
With io_uring we have started supporting tasks that are for most purposes user space tasks that exclusively run code in kernel mode. The kernel task that exec's init and tasks that exec user mode helpers are also user mode tasks that just run kernel code until they call kernel execve. Pass kernel_clone_args into copy_thread so these oddball tasks can be supported more cleanly and easily. v2: Fix spelling of kenrel_clone_args on h8300 Link: https://lkml.kernel.org/r/20220506141512.516114-2-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-05-07ARM: dts: imx6ull-colibri: improve pinctrl node namesMarcel Ziswiler1-47/+46
Improve on pinctrl node names. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-07ARM: dts: imx6ull-colibri: move gpio-keys node to som dtsiMarcel Ziswiler2-16/+15
The gpio-keys define module level wake-up pin functionality. Move it from the carrier board dts file to the Som dtsi file. While at it, also re-order the properties in the gpio-keys node alphabetically and rename to sub-node from power to wakeup. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-07ARM: dts: imx6ull-colibri: add/update some commentsMarcel Ziswiler2-10/+30
Add/update some comments. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-07ARM: dts: imx6ull-colibri: fix nand bch geometryMarcel Ziswiler1-0/+1
Fix NAND BCH geometry relevant mainly for U-Boot. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-07ARM: dts: imx6ull-colibri: add support for toradex aster carrier boardsDenys Drozdov5-0/+205
Add support for Toradex Aster, small form-factor Colibri Arm Computer Module family carrier board. Aster Device Trees: - imx6ull-colibri-aster.dtb - imx6ull-colibri-emmc-aster.dtb - imx6ull-colibri-wifi-aster.dtb Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-07ARM: dts: imx6ull-colibri: add support for toradex iris carrier boardsDenys Drozdov16-15/+385
Add support for Toradex Iris, small form-factor Pico-ITX Colibri Arm Computer Module family carrier boards. Iris Device Trees: - imx6ull-colibri-iris.dtb - imx6ull-colibri-emmc-iris.dtb - imx6ull-colibri-wifi-iris.dtb Iris-V2 Device Trees: - imx6ull-colibri-iris-v2.dtb - imx6ull-colibri-emmc-iris-v2.dtb - imx6ull-colibri-wifi-iris-v2.dtb Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-07ARM: dts: imx6ull-colibri: add gpio-line-namesOleksandr Suvorov2-0/+273
Add GPIO line names on module-level. Those are all GPIOs that a user might use on his custom carrier board. If more meaningful names are available on the carrier board, the user can overwrite the line names in the carrier board-level device tree. Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-07ARM: dts: imx6ull-colibri: update device trees to support overlaysDenys Drozdov2-33/+27
Prepare in-tree device trees for out-of-tree device tree overlay support (eMMC SKU only). Relocate panel-dpi default to edt,et057090dhu (RGB 18bit VGA 640x480) to the module-level dtsi and remove it from the carrier board dtsi. Keep backlight, resistive touch and Atmel maxtouch nodes enabled for both eMMC and NAND modules. Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-07ARM: dts: imx6ull-colibri: update usdhc1 pixmux and signalingPhilippe Schenker2-26/+24
Due to many carrier boards pulling the usdhc1 signals up to 3.3 volt we need to disable 1.8 volt signaling. Adding the no-1-8-v property basically disables UHS-I modes by default. Also pull-up the command and data lines to the +V3.3_1.8_SD rail and set them to the 200 MHz speed grade (e.g. pinmux bits 7-6: meaning 11 SPEED_3_max_200MHz). Explicitly specify a bus-width of <4> in the module-level device tree include file and drop the no-1-8-v property from the carrier boards device trees. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-07ARM: dts: imx6ull-colibri: add touchscreen device nodesDenys Drozdov3-16/+31
Move all Atmel nodes from the board-level into the main module-level device tree and prepare the device trees for use with Atmel MXT device tree overlays. Also, add required pinmux groups. The common scheme for pin groups in touch screen overlays is as follows: - pinctrl_atmel_conn - SODIMM 106/107 pins for INT/RST signals (default) - pinctrl_atmel_adap - SODIMM 28/30 pins for INT/RST signals. Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-07ARM: dts: imx6ull-colibri: add phy-supply to fecPhilippe Schenker1-0/+13
This adds the proper phy-supply to the FEC. This supply is actually switched by a clock that is now properly stated. This has the advantage to add a delay for that particular regulator which is needed. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-07ARM: dts: imx6ull-colibri: change touch i2c parametersMax Krummenacher1-4/+6
Switch on 22 kOhm pull-ups and lower the I2C frequency to around 40 kHz to get more reliable communication. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-07ARM: dts: imx6ull-colibri: use pull-down for adc pinsPhilippe Schenker1-0/+12
Disable the keeper and enable a 100k pull-down on the ADC pins as per the following note in section 13.2 of the i.MX 6ULL Application Processor Reference Manual, Rev. 1, 11/2017 [1]: The keeper causes an undesired jump behavior in ADC. To avoid the problem, disable keeper before starting ADC. [1] https://www.nxp.com/webapp/Download?colCode=IMX6ULLRM Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2022-05-06Merge tag 'tegra-for-5.19-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/socArnd Bergmann1-1/+1
ARM: tegra: Core changes for v5.19-rc1 A single fix for a typo in one of the comments in the SMP code. * tag 'tegra-for-5.19-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Fix typos in comments Link: https://lore.kernel.org/r/20220506143005.3916655-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-06Merge tag 'tegra-for-5.19-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfigArnd Bergmann1-0/+1
arm64: tegra: Default configuration updates for v5.19-rc1 This enables the driver for the new ASRC audio block that is found on Tegra186 and later. * tag 'tegra-for-5.19-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: defconfig: Build Tegra ASRC module Link: https://lore.kernel.org/r/20220506143005.3916655-6-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-06Merge tag 'tegra-for-5.19-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfigArnd Bergmann2-1/+3
ARM: tegra: Default configuration fixes for v5.18 This contains two updates to the default configuration needed because of a Kconfig symbol name change. This fixes a failure that was detected in the NVIDIA automated test farm. * tag 'tegra-for-5.19-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: config: multi v7: Enable NVIDIA Tegra video decoder driver ARM: tegra_defconfig: Update CONFIG_TEGRA_VDE option Link: https://lore.kernel.org/r/20220506143005.3916655-4-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-06Merge tag 'renesas-arm-defconfig-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfigArnd Bergmann1-0/+3
Renesas ARM defconfig updates for v5.19 (take two) - Enable support for the Renesas RZ/G2UL and RZ/V2M SoCs in the arm64 defconfig, * tag 'renesas-arm-defconfig-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: defconfig: Enable Renesas RZ/V2M SoC arm64: defconfig: Enable ARCH_R9A07G043 Link: https://lore.kernel.org/r/cover.1651828601.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-06Merge tag 'at91-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfigArnd Bergmann4-2/+16
AT91 defconfig #1 for 5.19: - update to MTD options and use of UBI - addition of systemd needed options - sama7: addition of reset, camera and microphone drivers * tag 'at91-defconfig-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: configs: at91: Enable AUTOFS_FS required by systemd ARM: configs: at91: Enable options required for systemd ARM: configs: at91: sama7: enable CONFIG_RESET_CONTROLLER ARM: configs: at91: sama7: add MCHP PDMC and DMIC drivers ARM: configs: at91: sama7: Enable MTD_UBI_BLOCK ARM: configs: at91: sama7: Enable MTD_UBI_FASTMAP ARM: configs: at91: sama7: add xisc and csi2dc ARM: multi_v7_defconfig: add atmel video pipeline modules ARM: configs: at91: Remove MTD_BLOCK and use MTD_UBI_BLOCK for read only block FS Link: https://lore.kernel.org/r/20220506085425.58270-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-06Merge tag 'renesas-arm-soc-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/socArnd Bergmann10-11/+11
Renesas ARM SoC updates for v5.19 - Drop commas after sentinels. * tag 'renesas-arm-soc-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: ARM: shmobile: rcar-gen2: Drop comma after OF match table sentinel ARM: shmobile: Drop commas after dt_compat sentinels Link: https://lore.kernel.org/r/cover.1651828611.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-06Merge tag 'samsung-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/socArnd Bergmann7-14/+7
Samsung mach/soc changes for v5.19 Cleanup: drop unneeded CONFIG_S3C24XX_PWM and fix some typos. * tag 'samsung-soc-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: s3c: fix typos in comments ARM: s3c: Drop config symbol S3C24XX_PWM Link: https://lore.kernel.org/r/20220506081438.149192-6-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-06Merge tag 'sunxi-dt-for-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dtArnd Bergmann4-10/+163
- F1C100 improvements (SPI, MMC, timer, cpu, watchdog) - SPI flash node for licheepi-nano - enabled analogue audio on olinuxino-a64 - GPIO port regulators on teres-i * tag 'sunxi-dt-for-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: teres-i: Add GPIO port regulators arm64: dts: allwinner: a64: olinuxino: Enable audio ARM: dts: suniv: licheepi-nano: add SPI flash ARM: dts: suniv: F1C100: add SPI support dt-bindings: spi: sunxi: document F1C100 controllers ARM: dts: suniv: licheepi-nano: add microSD card ARM: dts: suniv: F1C100: add MMC controllers ARM: dts: suniv: F1C100: fix timer node ARM: dts: suniv: F1C100: fix CPU node ARM: dts: suniv: F1C100: add clock and reset macros dt-bindings: arm: sunxi: document LicheePi Nano name ARM: dts: suniv: F1C100: fix watchdog compatible dt-bindings: watchdog: sunxi: clarify clock support dt-bindings: watchdog: sunxi: fix F1C100s compatible Link: https://lore.kernel.org/r/YnVUmSLE1MZFkApt@kista.localdomain Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-06Merge tag 'tegra-for-5.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dtArnd Bergmann11-13/+1028
arm64: tegra: Device tree changes for v5.19-rc1 This adds some improvements on Tegra234 (QSPI, CCPLEX), improves the SDMMC clock speed on Tegra194 and adds the ASRC audio block on various chip generations. Memory controller channels are also added on Tegra186 and later and the missing DFLL reset is added for Tegra210. * tag 'tegra-for-5.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Add missing DFLL reset on Tegra210 arm64: tegra: Add memory controller channels arm64: tegra: Enable ASRC on various platforms arm64: tegra: Add ASRC device on Tegra186 and later arm64: tegra: Update PWM fan node name arm64: tegra: Add node for Tegra234 CCPLEX cluster arm64: tegra: Add QSPI controllers on Tegra234 arm64: tegra: Update SDMMC1/3 clock source for Tegra194 Link: https://lore.kernel.org/r/20220506143005.3916655-5-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-06Merge tag 'renesas-arm-dt-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dtArnd Bergmann36-204/+1083
Renesas ARM DT updates for v5.19 (take two) - I2C, sound, USB, CANFD, timer, watchdog, (Q)SPI, cpufreq, and thermal support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVK development board, - Initial support for the R-Car V4H SoC and the Renesas White Hawk development board stack, - DMA, RTC, and USB support for the RZ/N1D SoC, - Initial support for the RZ/V2M SoC an the RZ/V2M Evaluation Kit Board, - Miscellaneous fixes and improvements. * tag 'renesas-arm-dt-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (40 commits) arm64: dts: renesas: Add initial device tree for RZ/V2M EVK arm64: dts: renesas: Add initial DTSI for RZ/V2M SoC arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values ARM: dts: r9a06g032: Link the PCI USB devices to the USB PHY ARM: dts: r9a06g032: Add USB PHY DT support ARM: dts: r9a06g032: Add internal PCI bridge node ARM: dts: r9a06g032: Describe the RTC arm64: dts: renesas: Add interrupt-names to CANFD nodes arm64: dts: renesas: r9a07g043: Add SPI Multi I/O Bus controller node arm64: dts: renesas: r9a07g043: Create thermal zone to support IPA arm64: dts: renesas: r9a07g043: Add TSU node arm64: dts: renesas: r9a07g043: Add OPP table arm64: dts: renesas: r9a07g043: Add RSPI{0,1,2} nodes arm64: dts: renesas: r9a07g054: Fix external clk node names arm64: dts: renesas: r9a07g044: Fix external clk node names ARM: dts: r9a06g032: Fix the NAND controller node ARM: dts: r9a06g032: Fill the UART DMA properties ARM: dts: r9a06g032: Describe the DMA router ARM: dts: r9a06g032: Add the two DMA nodes arm64: dts: renesas: Remove empty rgb output endpoints ... Link: https://lore.kernel.org/r/cover.1651828603.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-06Merge tag 'samsung-dt64-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dtArnd Bergmann5-44/+94
Samsung DTS ARM64 changes for v5.19, part two 1. Cleanups: unused and undocumented dma-channels and dma-requests. 2. Add clock controllers to ExynosAutov9. * tag 'samsung-dt64-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: switch UFS clock node in ExynosAutov9 arm64: dts: exynos: switch USI clocks in ExynosAutov9 arm64: dts: exynos: add initial CMU clock nodes in ExynosAutov9 dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings dt-bindings: clock: add clock binding definitions for Exynos Auto v9 arm64: dts: fsd: drop useless 'dma-channels/requests' properties arm64: dts: exynos: drop useless 'dma-channels/requests' properties arm64: dts: exynos: move XTCXO clock frequency to board in Exynos Auto v9 Link: https://lore.kernel.org/r/20220506081438.149192-5-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.