| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Used by P10 machines.
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
It is used by the rainier and other p10bmc machines.
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add support to detect USB flash drives and create the /dev/sd* devices.
Also add support for vfat to support USB drives formatted as FAT32.
This support will be used to enable firmware updates via USB flash
drives where the firmware image is stored in the USB drive and it's
plugged into the BMC USB port.
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Tested-by: Adriana Kobylak <anoo@us.ibm.com>
Link: https://lore.kernel.org/r/20211112202931.2379145-1-anoo@linux.ibm.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The AST2600 EVB A1 is an AST2600 EVB.
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The AST2600 EVB is not an A1.
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Now that the pinctrl definitions of the ast2600 SoC have been fixed,
see commit 925fbe1f7eb6 ("dt-bindings: pinctrl: aspeed-g6: add FWQSPI
function/group"), it is safe to activate QSPI on the ast2600 evb.
Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Link: https://lore.kernel.org/r/20220603073705.1624351-1-clg@kaod.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Setup the configuration of UART6, UART7, UART8, and UART9 in
aspeed-g6.dtsi.
Signed-off-by: Ken Chen <j220584470k@gmail.com>
Link: https://lore.kernel.org/r/20220805090957.470434-1-j220584470k@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Removed NIC EEPROM driver IPMB-12 channel and enabled it as
generic i2c EEPROM.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Link: https://lore.kernel.org/r/20220914115307.GA339@hcl-ThinkPad-T495
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Add initial version of device tree for the BMC in the AMD DaytonaX
platform.
AMD DaytonaX platform is a customer reference board (CRB) with an
Aspeed ast2500 BMC manufactured by AMD.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921210950.10568-3-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Added IPMB-13 channel for Debug Card communication which improves the
readability of the machine and makes it easier to debug the server and
it will display some pieces of information about the server like "system
info", "Critical sensors" and "critical sel".
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220926124313.GA8400@hcl-ThinkPad-T495
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Remove the gpio-keys entries from the Ampere's Mt. Jade BMC device
tree. The user space applications are going to change from using
libevdev to libgpiod.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20220915080828.2894070-1-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
The Mt. Mitchell BMC is an ASPEED AST2600-based BMC for the Mt. Mitchell
hardware reference platform with AmpereOne(TM) processor.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220817071539.176110-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Pull ARM SoC fixes from Arnd Bergmann:
"This should be the last set of bugfixes in the SoC tree:
- Two fixes for Arm integrator, dealing with a regression caused by
invalid DT properties combined with a change in dma address
translation, and missing device_type annotations on the PCI bus
- Fixes for drivers/reset/, addressing bugs in i.MX8MP, Sparx5 and
NPCM8XX platforms
- Bjorn Andersson's email address changes in the MAINTAINERS file
- Multiple minor fixes to Qualcomm dts files, and a change to the
remoteproc firmware filename that did not match the actual path in
the linux-firmware package
- Minor code fixes for the Allwinner/sunxi SRAM driver, and the
broadcom STB Bus Interface Unit driver
- A build fix for the sunplus sp7021 platform
- Two dts fixes for TI OMAP family SoCs, addressing an extraneous
usb4 device node and an incorrect DMA handle"
* tag 'soc-fixes-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: integrator: Fix DMA ranges
ARM: dts: integrator: Tag PCI host with device_type
ARM: sunplus: fix serial console kconfig and build problems
reset: npcm: fix iprst2 and iprst4 setting
arm64: dts: qcom: sm8350: fix UFS PHY serdes size
soc: bcm: brcmstb: biuctrl: Avoid double of_node_put()
arm64: dts: qcom: sc8280xp-x13s: Update firmware location
soc: sunxi: sram: Fix debugfs info for A64 SRAM C
soc: sunxi: sram: Fix probe function ordering issues
soc: sunxi: sram: Prevent the driver from being unbound
soc: sunxi: sram: Actually claim SRAM regions
ARM: dts: am5748: keep usb4_tm disabled
reset: microchip-sparx5: issue a reset on startup
reset: imx7: Fix the iMX8MP PCIe PHY PERST support
MAINTAINERS: Update Bjorn's email address
arm64: dts: qcom: sc7280: move USB wakeup-source property
arm64: dts: qcom: thinkpad-x13s: Fix firmware location
arm64: dts: qcom: sm8150: Fix fastrpc iommu values
ARM: dts: am33xx: Fix MMCHS0 dma properties
|
|
I encountered some occasional crashes of poke_int3_handler() when
kprobes are set, while accessing desc->vec.
The text poke mechanism claims to have an RCU-like behavior, but it
does not appear that there is any quiescent state to ensure that
nobody holds reference to desc. As a result, the following race
appears to be possible, which can lead to memory corruption.
CPU0 CPU1
---- ----
text_poke_bp_batch()
-> smp_store_release(&bp_desc, &desc)
[ notice that desc is on
the stack ]
poke_int3_handler()
[ int3 might be kprobe's
so sync events are do not
help ]
-> try_get_desc(descp=&bp_desc)
desc = __READ_ONCE(bp_desc)
if (!desc) [false, success]
WRITE_ONCE(bp_desc, NULL);
atomic_dec_and_test(&desc.refs)
[ success, desc space on the stack
is being reused and might have
non-zero value. ]
arch_atomic_inc_not_zero(&desc->refs)
[ might succeed since desc points to
stack memory that was freed and might
be reused. ]
Fix this issue with small backportable patch. Instead of trying to
make RCU-like behavior for bp_desc, just eliminate the unnecessary
level of indirection of bp_desc, and hold the whole descriptor as a
global. Anyhow, there is only a single descriptor at any given
moment.
Fixes: 1f676247f36a4 ("x86/alternatives: Implement a better poke_int3_handler() completion scheme")
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/20220920224743.3089-1-namit@vmware.com
|
|
Use the new sample_flags to indicate whether the raw data field is
filled by the PMU driver. Although it could check with the NULL,
follow the same rule with other fields.
Remove the raw field from the perf_sample_data_init() to minimize
the number of cache lines touched.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220921220032.2858517-2-namhyung@kernel.org
|
|
Use the new sample_flags to indicate whether the addr field is filled by
the PMU driver. As most PMU drivers pass 0, it can set the flag only if
it has a non-zero value. And use 0 in perf_sample_output() if it's not
filled already.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220921220032.2858517-1-namhyung@kernel.org
|
|
|
|
"MIPS: Lantiq: switch vmmc to use gpiod API" patch introduced compile
errors, this patch fixes them.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
An unused macro reported by [-Wunused-macros].
This macro is used to access the sp in pt_regs because at that time
x86_32 can only get sp by kernel_stack_pointer(regs).
'3c88c692c287 ("x86/stackframe/32: Provide consistent pt_regs")'
This commit have unified the pt_regs and from them we can get sp from
pt_regs with regs->sp easily. Nowhere is using this macro anymore.
Refrencing pt_regs directly is more clear. Remove this macro for
code cleaning.
Link: https://lkml.kernel.org/r/20220924072629.104759-1-chenzhongjin@huawei.com
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In the v2022.10 reference design, the seg registers are going to be
changed, resulting in a required change to the memory map in Linux.
A small 4M reservation is made at the end of 32-bit DDR to provide some
memory for the HSS to use, so that it can cache its payload.bin between
reboots of a specific context.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add device trees for both configs used by the Aries Embedded
M100PFSEVP. The M100OFSEVP consists of a MPFS250T on a SOM,
featuring:
- 2GB DDR4 SDRAM dedicated to the HMS
- 512MB DDR4 SDRAM dedicated to the FPGA
- 32 MB SPI NOR Flash
- 4 GByte eMMC
and a carrier board with:
- 2x Gigabit Ethernet
- USB
- 2x UART
- 2x CAN
- TFT connector
- HSMC extension connector
- 3x PMOD extension connectors
- microSD-card slot
Link: https://www.aries-embedded.com/polarfire-soc-fpga-microsemi-m100pfs-som-mpfs025t-pcie-serdes
Link: https://www.aries-embedded.com/evaluation-kit/fpga/polarfire-microchip-soc-fpga-m100pfsevp-riscv-hsmc-pmod
Link: https://downloads.aries-embedded.de/products/M100PFS/Hardware/M100PFSEVP-Schematics.pdf
Co-developed-by: Wolfgang Grandegger <wg@aries-embedded.de>
Signed-off-by: Wolfgang Grandegger <wg@aries-embedded.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Add a basic dts for the Microchip Smart Embedded Vision dev kit.
The SEV kit is an upcoming first party board, featuring an MPFS250T and:
- Dual Sony Camera Sensors (IMX334)
- IEEE 802.11 b/g/n 20MHz (1x1) Wi-Fi
- Bluetooth 5 Low Energy
- 4 GB DDR4 x64
- 2 GB LPDDR4 x32
- 1 GB SPI Flash
- 8 GB eMMC flash & SD card slot (multiplexed)
- HDMI2.0 Video Input/Output
- MIPI DSI Output
- MIPI CSI-2 Input
Link: https://onlinedocs.microchip.com/pr/GUID-404D3738-DC76-46BA-8683-6A77E837C2DD-en-US-1/index.html?GUID-065AEBEE-7B2C-4895-8579-B1D73D797F06
Signed-off-by: Vattipalli Praveen <praveen.kumar@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
For the v2022.09 release of the reference design, the fic3 clock rate
been reduced from 62.5 MHz to 50 MHz as it allows timing to be closed
significantly more quickly by customers who chose to build the
reference design themselves.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
When users try to add onto the reference design, they find that the
current addresses that peripherals connected to Fabric InterConnect
(FIC) 3 use are restrictive. For the v2022.09 reference design, the
peripherals have been shifted down, leaving more contiguous address
space for their custom IP/peripherals.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
For the v2022.09 reference design the PCI root port's data region has
been moved to FIC1 from FIC0. This is a shorter path, allowing for
higher clock rates and improved through-put. As a result, the address at
which the PCIe's data region appears to the core complex has changed.
The config region's address is unchanged.
As FIC0 is no longer used, its clock can be removed too.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
In today's edition of moving things around:
The PCIe root port on PolarFire SoC is more part of the FPGA than of
the Core Complex. It is located on the other side of the chip and,
apart from its interrupts, most of its configuration is determined
by the FPGA bitstream rather. This includes:
- address translation in both directions
- the addresses at which the config and data regions appear to the
core complex
- the clocks used by the AXI bus
- the plic interrupt used
Moving the PCIe node to the -fabric.dtsi makes it clearer than a
singular configuration for root port is not correct & allows the
base SoC dtsi to be more easily included.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
The recently removed, accidentally included, "matr0" property was used
in place of a dma-ranges property. The PCI controller is non-functional
with mainline Linux in the v2022.02 or later reference designs and has
not worked without configuration of address-translation since v2021.08.
Add the address translation that will be used by the v2022.09 reference
design & update the compatible used by the dts. Since this change is not
backwards compatible, update the compatible to denote this, jumping over
v2022.09 directly to v2022.10.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
|
|
Stolen time logging in dtl was removed from the P9 path, so guests had
no stolen time accounting. Add it back in a simpler way that still
avoids locks and per-core accounting code.
Fixes: ecb6a7207f92 ("KVM: PPC: Book3S HV P9: Remove most of the vcore logic")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220908132545.4085849-4-npiggin@gmail.com
|
|
Update the guest state and timing entry/exit accounting to use the new
API, which was introduced following issues found[1]. KVM HV does
possibly call instrumented code inside the guest context, and it does
call srcu inside the guest context which is fragile at best.
Switch to the new API, moving the guest context inside the
srcu_read_lock/unlock region.
[1] https://lore.kernel.org/lkml/20220201132926.3301912-1-mark.rutland@arm.com/
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220908132545.4085849-3-npiggin@gmail.com
|
|
kvmhv_run_single_vcpu() disables PMIs as well as Linux irqs,
however the tick time accounting code enables and disables irqs and
not PMIs within this region. By chance this might not actually cause
a bug, but it is clearly an incorrect use of the APIs.
Fixes: 2251fbe76395e ("KVM: PPC: Book3S HV P9: Improve mtmsrd scheduling by delaying MSR[EE] disable")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220908132545.4085849-2-npiggin@gmail.com
|
|
On guest entry, vcpu->cpu and vcpu->arch.thread_cpu are set after
disabling host irqs. On guest exit there is a window whre tick time
accounting briefly enables irqs before these fields are cleared.
Move them up to ensure they are cleared before host irqs are run.
This is possibly not a problem, but is more symmetric and makes the
fields less surprising.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220908132545.4085849-1-npiggin@gmail.com
|
|
We used to have a workaround[1] for a hang during migration that was
made ineffective when we converted the decrementer expiry to be
relative to guest timebase.
The point of the workaround was that in the absence of an explicit
decrementer expiry value provided by userspace during migration, KVM
needs to initialize dec_expires to a value that will result in an
expired decrementer after subtracting the current guest timebase. That
stops the vcpu from hanging after migration due to a decrementer
that's too large.
If the dec_expires is now relative to guest timebase, its
initialization needs to be guest timebase-relative as well, otherwise
we end up with a decrementer expiry that is still larger than the
guest timebase.
1- https://git.kernel.org/torvalds/c/5855564c8ab2
Fixes: 3c1a4322bba7 ("KVM: PPC: Book3S HV: Change dec_expires to be relative to guest timebase")
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220816222517.1916391-1-farosas@linux.ibm.com
|
|
In commit 19e8b701e258 ("a.out: Stop building a.out/osf1 support on
alpha and m68k") the last users of a.out were disabled.
As nothing has turned up to cause this change to be reverted, let's
remove the code implementing a.out support as well.
There may be userspace users of the uapi bits left so the uapi
headers have been left untouched.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> # arm defconfigs
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/871qrx3hq3.fsf@email.froward.int.ebiederm.org
|
|
Move some code that is only reachable when IS_ENABLED(CONFIG_ARM) into
the ARM EFI arch code.
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Second shared stable tag between EFI and LoongArch trees
This is necessary because the EFI libstub refactoring patches are mostly
directed at enabling LoongArch to wire up generic EFI boot support
without being forced to consume DT properties that conflict with
information that EFI also provides, e.g., memory map and reservations,
etc.
|
|
LoongArch does not use FDT or DT natively [yet], and the only reason it
currently uses it is so that it can reuse the existing EFI stub code.
Overloading the DT with data passed between the EFI stub and the core
kernel has been a source of problems: there is the overlap between
information provided by EFI which DT can also provide (initrd base/size,
command line, memory descriptions), requiring us to reason about which
is which and what to prioritize. It has also resulted in ABI leaks,
i.e., internal ABI being promoted to external ABI inadvertently because
the bootloader can set the EFI stub's DT properties as well (e.g.,
"kaslr-seed"). This has become especially problematic with boot
environments that want to pretend that EFI boot is being done (to access
ACPI and SMBIOS tables, for instance) but have no ability to execute the
EFI stub, and so the environment that the EFI stub creates is emulated
[poorly, in some cases].
Another downside of treating DT like this is that the DT binary that the
kernel receives is different from the one created by the firmware, which
is undesirable in the context of secure and measured boot.
Given that LoongArch support in Linux is brand new, we can avoid these
pitfalls, and treat the DT strictly as a hardware description, and use a
separate handover method between the EFI stub and the kernel. Now that
initrd loading and passing the EFI memory map have been refactored into
pure EFI routines that use EFI configuration tables, the only thing we
need to pass directly is the kernel command line (even if we could pass
this via a config table as well, it is used extremely early, so passing
it directly is preferred in this case.)
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Allocate bpf_dispatcher with bpf_prog_pack_alloc so that bpf_dispatcher
can share pages with bpf programs.
arch_prepare_bpf_dispatcher() is updated to provide a RW buffer as working
area for arch code to write to.
This also fixes CPA W^X warnning like:
CPA refuse W^X violation: 8000000000000163 -> 0000000000000163 range: ...
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20220926184739.3512547-2-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Using function address given at the generation time as the trampoline
ip argument. This way we get directly the function address that we
need, so we don't need to:
- read the ip from the stack
- subtract X86_PATCH_SIZE
- subtract ENDBR_INSN_SIZE if CONFIG_X86_KERNEL_IBT is enabled
which is not even implemented yet ;-)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220926153340.1621984-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Remove the linked list use in favour of the vma iterator.
Link: https://lkml.kernel.org/r/20220906194824.2110408-67-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the VMA iterator instead.
Link: https://lkml.kernel.org/r/20220906194824.2110408-40-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the VMA iterator instead. Since VMA can no longer be NULL in the
loop, then deal with out-of-memory outside the loop. This means a
slightly longer run time in the failure case (-ENOMEM) - it will run to
the end of the VMAs before erroring instead of in the middle of the loop.
Link: https://lkml.kernel.org/r/20220906194824.2110408-37-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the VMA iterator instead.
Link: https://lkml.kernel.org/r/20220906194824.2110408-36-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the VMA iterator instead.
Link: https://lkml.kernel.org/r/20220906194824.2110408-35-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the VMA iterator instead.
Link: https://lkml.kernel.org/r/20220906194824.2110408-34-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the VMA iterator instead.
Link: https://lkml.kernel.org/r/20220906194824.2110408-33-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Rework for_each_mte_vma() to use a VMA iterator instead of an explicit
linked-list.
Link: https://lkml.kernel.org/r/20220906194824.2110408-32-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20220218023650.672072-1-Liam.Howlett@oracle.com
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use the VMA iterator instead.
Link: https://lkml.kernel.org/r/20220906194824.2110408-31-Liam.Howlett@oracle.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove the RB tree and start using the maple tree for vm_area_struct
tracking.
Drop validate_mm() calls in expand_upwards() and expand_downwards() as the
lock is not held.
Link: https://lkml.kernel.org/r/20220906194824.2110408-18-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Start tracking the VMAs with the new maple tree structure in parallel with
the rb_tree. Add debug and trace events for maple tree operations and
duplicate the rb_tree that is created on forks into the maple tree.
The maple tree is added to the mm_struct including the mm_init struct,
added support in required mm/mmap functions, added tracking in kernel/fork
for process forking, and used to find the unmapped_area and checked
against what the rbtree finds.
This also moves the mmap_lock() in exit_mmap() since the oom reaper call
does walk the VMAs. Otherwise lockdep will be unhappy if oom happens.
When splitting a vma fails due to allocations of the maple tree nodes,
the error path in __split_vma() calls new->vm_ops->close(new). The page
accounting for hugetlb is actually in the close() operation, so it
accounts for the removal of 1/2 of the VMA which was not adjusted. This
results in a negative exit value. To avoid the negative charge, set
vm_start = vm_end and vm_pgoff = 0.
There is also a potential accounting issue in special mappings from
insert_vm_struct() failing to allocate, so reverse the charge there in
the failure scenario.
Link: https://lkml.kernel.org/r/20220906194824.2110408-9-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Tested-by: Yu Zhao <yuzhao@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
Joel Stanley
Adriana Kobylak
Cédric Le Goater
Ken Chen
Karthikeyan Pasupathi
Konstantin Aladyshev
Quan Nguyen
Linus Torvalds
Nadav Amit
Namhyung Kim
Wolfram Sang
Dmitry Torokhov
Chen Zhongjin
Conor Dooley
Vattipalli Praveen
Nicholas Piggin
Fabiano Rosas
Eric W. Biederman
Ard Biesheuvel
Song Liu
Jiri Olsa
Liam R. Howlett
Matthew Wilcox (Oracle)