| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Due to what looks like a copy-paste error, the ECSPI2_MISO pad is not
muxed for SPI mode and causes reads from a slave-device connected to the
SPI header to always return zero.
Configure the ECSPI2_MISO pad for SPI mode on the gw71xx, gw72xx and
gw73xx families of boards that got this wrong.
Fixes: 6f30b27c5ef5 ("arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits")
Cc: stable@vger.kernel.org # 5.12
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This adds the QSPI controllers on the Tegra234 SoC and populates the
SPI NOR flash device for the Jetson AGX Orin platform.
Signed-off-by: Ashish Singhal <ashishsingha@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
The i.MX8MQ PLL support hdmi phy 27m as pll reference clock,
so add a fixed clock for it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The default parent for SDMMC1/3 clock sources can provide maximum frequency
of 136MHz for SDR104 mode.
Update parent clock source for SDMMC1/SDMMC3 instances
to increase the output clock frequency to 195MHz and improve the perf.
Signed-off-by: Aniruddha Rao <anrao@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Use the proper voltages as supported by the board instead of the ones
supported by the PMIC. The voltages were taken from both the schematic
of the 8MNANOLPD4-EVK eval board and the datasheet of the IMX8MN SoC.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Use the power signal names as given in the schematics of the reference
board.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Introduce wed0 and wed1 nodes in order to enable offloading forwarding
between ethernet and wireless devices on the mt7622 chipset.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It improves performance by eliminating the need for a cache flush on rx and tx
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of changing default pwm-cells property, use the default
"#pwm-cells = <3>" and add the third option.
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for the PHYTEC phyGATE-Tauri-S with i.MX 6ULL with eMMC or
NAND.
Supported features:
* eMMC/NAND
* i2c RTC
* i2c TEMP
* PMIC
* PWM
* debug UART
* CAN
* SD card
* 2x 1Gbit Ethernet
* RS232/RS485
* USB 2.0 Host
* TPM
* SPI-NOR
Signed-off-by: Alexander Bauer <a.bauer@phytec.de>
Signed-off-by: Jens Lang <j.lang@phytec.de>
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add device trees for the MBa6ULx mainboard with TQMa6ULLxL SoMs.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add device trees for the MBa6ULx mainboard with TQMa6ULLx SoMs.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add device trees for the MBa6ULx mainboard with TQMa6ULxL SoMs.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add device trees for the MBa6ULx mainboard with TQMa6ULx SoMs.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The node name of Ethernet controller should be "ethernet" instead of
"usbether" as required by Ethernet controller devicetree schema:
Documentation/devicetree/bindings/net/ethernet-controller.yaml
This patch can potentially affect boot loaders patching against full
node path instead of using device aliases.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This is effectively a revert of the temporary disablement
patch. Battery charging now works!
We also enable static battery data for the Samsung SDI
batteries as used by the U8500 Samsung phones.
Cc: Lee Jones <lee.jones@linaro.org>
Fixes: a1149ae97554 ("ARM: ux500: Disable Power Supply and Battery Management by default")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
KVM allows userspace to configure either all EL1 32bit or 64bit vCPUs
for a guest. At vCPU reset, vcpu_allowed_register_width() checks
if the vcpu's register width is consistent with all other vCPUs'.
Since the checking is done even against vCPUs that are not initialized
(KVM_ARM_VCPU_INIT has not been done) yet, the uninitialized vCPUs
are erroneously treated as 64bit vCPU, which causes the function to
incorrectly detect a mixed-width VM.
Introduce KVM_ARCH_FLAG_EL1_32BIT and KVM_ARCH_FLAG_REG_WIDTH_CONFIGURED
bits for kvm->arch.flags. A value of the EL1_32BIT bit indicates that
the guest needs to be configured with all 32bit or 64bit vCPUs, and
a value of the REG_WIDTH_CONFIGURED bit indicates if a value of the
EL1_32BIT bit is valid (already set up). Values in those bits are set at
the first KVM_ARM_VCPU_INIT for the guest based on KVM_ARM_VCPU_EL1_32BIT
configuration for the vCPU.
Check vcpu's register width against those new bits at the vcpu's
KVM_ARM_VCPU_INIT (instead of against other vCPUs' register width).
Fixes: 66e94d5cafd4 ("KVM: arm64: Prevent mixed-width VM creation")
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220329031924.619453-2-reijiw@google.com
|
|
Add the needed functionality to change pages state from shared
to private and vice-versa using the Page State Change VMGEXIT as
documented in the GHCB spec.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-22-brijesh.singh@amd.com
|
|
probe_roms() accesses the memory range (0xc0000 - 0x10000) to probe
various ROMs. The memory range is not part of the E820 system RAM range.
The memory range is mapped as private (i.e encrypted) in the page table.
When SEV-SNP is active, all the private memory must be validated before
accessing. The ROM range was not part of E820 map, so the guest BIOS
did not validate it. An access to invalidated memory will cause a
exception yet, so validate the ROM memory regions before it is accessed.
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-21-brijesh.singh@amd.com
|
|
The encryption attribute for the .bss..decrypted section is cleared in the
initial page table build. This is because the section contains the data
that need to be shared between the guest and the hypervisor.
When SEV-SNP is active, just clearing the encryption attribute in the
page table is not enough. The page state needs to be updated in the RMP
table.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-20-brijesh.singh@amd.com
|
|
early_set_memory_{encrypted,decrypted}() are used for changing the page
state from decrypted (shared) to encrypted (private) and vice versa.
When SEV-SNP is active, the page state transition needs to go through
additional steps.
If the page is transitioned from shared to private, then perform the
following after the encryption attribute is set in the page table:
1. Issue the page state change VMGEXIT to add the page as a private
in the RMP table.
2. Validate the page after its successfully added in the RMP table.
To maintain the security guarantees, if the page is transitioned from
private to shared, then perform the following before clearing the
encryption attribute from the page table.
1. Invalidate the page.
2. Issue the page state change VMGEXIT to make the page shared in the
RMP table.
early_set_memory_{encrypted,decrypted}() can be called before the GHCB
is setup so use the SNP page state MSR protocol VMGEXIT defined in the
GHCB specification to request the page state change in the RMP table.
While at it, add a helper snp_prep_memory() which will be used in
probe_roms(), in a later patch.
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-19-brijesh.singh@amd.com
|
|
The SEV-SNP guest is required by the GHCB spec to register the GHCB's
Guest Physical Address (GPA). This is because the hypervisor may prefer
that a guest uses a consistent and/or specific GPA for the GHCB associated
with a vCPU. For more information, see the GHCB specification section
"GHCB GPA Registration".
[ bp: Cleanup comments. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-18-brijesh.singh@amd.com
|
|
The SEV-SNP guest is required by the GHCB spec to register the GHCB's
Guest Physical Address (GPA). This is because the hypervisor may prefer
that a guest use a consistent and/or specific GPA for the GHCB associated
with a vCPU. For more information, see the GHCB specification section
"GHCB GPA Registration".
If hypervisor can not work with the guest provided GPA then terminate the
guest boot.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-17-brijesh.singh@amd.com
|
|
Many of the integrity guarantees of SEV-SNP are enforced through the
Reverse Map Table (RMP). Each RMP entry contains the GPA at which a
particular page of DRAM should be mapped. The VMs can request the
hypervisor to add pages in the RMP table via the Page State Change
VMGEXIT defined in the GHCB specification.
Inside each RMP entry is a Validated flag; this flag is automatically
cleared to 0 by the CPU hardware when a new RMP entry is created for a
guest. Each VM page can be either validated or invalidated, as indicated
by the Validated flag in the RMP entry. Memory access to a private page
that is not validated generates a #VC. A VM must use the PVALIDATE
instruction to validate a private page before using it.
To maintain the security guarantee of SEV-SNP guests, when transitioning
pages from private to shared, the guest must invalidate the pages before
asking the hypervisor to change the page state to shared in the RMP table.
After the pages are mapped private in the page table, the guest must
issue a page state change VMGEXIT to mark the pages private in the RMP
table and validate them.
Upon boot, BIOS should have validated the entire system memory.
During the kernel decompression stage, early_setup_ghcb() uses
set_page_decrypted() to make the GHCB page shared (i.e. clear encryption
attribute). And while exiting from the decompression, it calls
set_page_encrypted() to make the page private.
Add snp_set_page_{private,shared}() helpers that are used by
set_page_{decrypted,encrypted}() to change the page state in the RMP
table.
[ bp: Massage commit message and comments. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-16-brijesh.singh@amd.com
|
|
The Virtual Machine Privilege Level (VMPL) feature in the SEV-SNP
architecture allows a guest VM to divide its address space into four
levels. The level can be used to provide hardware isolated abstraction
layers within a VM. VMPL0 is the highest privilege level, and VMPL3 is
the least privilege level. Certain operations must be done by the VMPL0
software, such as:
* Validate or invalidate memory range (PVALIDATE instruction)
* Allocate VMSA page (RMPADJUST instruction when VMSA=1)
The initial SNP support requires that the guest kernel is running at
VMPL0. Add such a check to verify the guest is running at level 0 before
continuing the boot. There is no easy method to query the current VMPL
level, so use the RMPADJUST instruction to determine whether the guest
is running at the VMPL0.
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-15-brijesh.singh@amd.com
|
|
An SNP-active guest uses the PVALIDATE instruction to validate or
rescind the validation of a guest page’s RMP entry. Upon completion, a
return code is stored in EAX and rFLAGS bits are set based on the return
code. If the instruction completed successfully, the carry flag (CF)
indicates if the content of the RMP were changed or not.
See AMD APM Volume 3 for additional details.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-14-brijesh.singh@amd.com
|
|
Version 2 of the GHCB specification added the advertisement of features
that are supported by the hypervisor. If the hypervisor supports SEV-SNP
then it must set the SEV-SNP features bit to indicate that the base
functionality is supported.
Check that feature bit while establishing the GHCB; if failed, terminate
the guest.
Version 2 of the GHCB specification adds several new Non-Automatic Exits
(NAEs), most of them are optional except the hypervisor feature. Now
that the hypervisor feature NAE is implemented, bump the GHCB maximum
supported protocol version.
While at it, move the GHCB protocol negotiation check from the #VC
exception handler to sev_enable() so that all feature detection happens
before the first #VC exception.
While at it, document why the GHCB page cannot be setup from
load_stage2_idt().
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-13-brijesh.singh@amd.com
|
|
The SEV-ES guest calls sev_es_negotiate_protocol() to negotiate the GHCB
protocol version before establishing the GHCB. Cache the negotiated GHCB
version so that it can be used later.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-12-brijesh.singh@amd.com
|
|
Add config and compile options which allow to compile with z16
optimizations if the compiler supports it.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Add detection for machine types 0x3931 and 0x3932 and set ELF platform
name to z16.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The GHCB specification defines the reason code for reason set 0. The
reason codes defined in the set 0 do not cover all possible causes for a
guest to request termination.
The reason sets 1 to 255 are reserved for the vendor-specific codes.
Reserve the reason set 1 for the Linux guest. Define the error codes for
reason set 1 so that one can have meaningful termination reasons and thus
better guest failure diagnosis.
While at it, change sev_es_terminate() to accept a reason set parameter.
[ bp: Massage commit message. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-11-brijesh.singh@amd.com
|
|
The CC_ATTR_GUEST_SEV_SNP can be used by the guest to query whether the
SNP (Secure Nested Paging) feature is active.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-10-brijesh.singh@amd.com
|
|
sme_enable() handles feature detection for both SEV and SME. Future
patches will also use it for SEV-SNP feature detection/setup, which
will need to be done immediately after the first #VC handler is set up.
Move it now in preparation.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-9-brijesh.singh@amd.com
|
|
With upcoming SEV-SNP support, SEV-related features need to be
initialized earlier during boot, at the same point the initial #VC
handler is set up, so that the SEV-SNP CPUID table can be utilized
during the initial feature checks. Also, SEV-SNP feature detection
will rely on EFI helper functions to scan the EFI config table for the
Confidential Computing blob, and so would need to be implemented at
least partially in C.
Currently set_sev_encryption_mask() is used to initialize the
sev_status and sme_me_mask globals that advertise what SEV/SME features
are available in a guest. Rename it to sev_enable() to better reflect
that (SME is only enabled in the case of SEV guests in the
boot/compressed kernel), and move it to just after the stage1 #VC
handler is set up so that it can be used to initialize SEV-SNP as well
in future patches.
While at it, re-implement it as C code so that all SEV feature
detection can be better consolidated with upcoming SEV-SNP feature
detection, which will also be in C.
The 32-bit entry path remains unchanged, as it never relied on the
set_sev_encryption_mask() initialization to begin with.
[ bp: Massage commit message. ]
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-8-brijesh.singh@amd.com
|
|
Update all C code to use the new boot_rdmsr()/boot_wrmsr() helpers
instead of relying on inline assembly.
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-7-brijesh.singh@amd.com
|
|
The current set of helpers used throughout the run-time kernel have
dependencies on code/facilities outside of the boot kernel, so there
are a number of call-sites throughout the boot kernel where inline
assembly is used instead. More will be added with subsequent patches
that add support for SEV-SNP, so take the opportunity to provide a basic
set of helpers that can be used by the boot kernel to reduce reliance on
inline assembly.
Use boot_* prefix so that it's clear these are helpers specific to the
boot kernel to avoid any confusion with the various other MSR read/write
helpers.
[ bp: Disambiguate parameter names and trim comment. ]
Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220307213356.2797205-6-brijesh.singh@amd.com
|
|
The alternatives code must be `noinstr` such that it does not patch itself,
as the cache invalidation is only performed after all the alternatives have
been applied.
Mark patch_alternative() as `noinstr`. Mark branch_insn_requires_update()
and get_alt_insn() with `__always_inline` since they are both only called
through patch_alternative().
Booting a kernel in QEMU TCG with KCSAN=y and ARM64_USE_LSE_ATOMICS=y caused
a boot hang:
[ 0.241121] CPU: All CPU(s) started at EL2
The alternatives code was patching the atomics in __tsan_read4() from LL/SC
atomics to LSE atomics.
The following fragment is using LL/SC atomics in the .text section:
| <__tsan_unaligned_read4+304>: ldxr x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This LL/SC atomic sequence was to be replaced with LSE atomics. However since
the alternatives code was instrumentable, __tsan_read4() was being called after
only the first instruction was replaced, which led to the following code in memory:
| <__tsan_unaligned_read4+304>: ldadd x5, x6, [x2]
| <__tsan_unaligned_read4+308>: add x6, x6, x5
| <__tsan_unaligned_read4+312>: stxr w7, x6, [x2]
| <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304>
This caused an infinite loop as the `stxr` instruction never completed successfully,
so `w7` was always 0.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220405104733.11476-1-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This is the final step in defining the multiple save areas to keep them
separate and ensuring proper operation amongst the different types of
guests. Update the SEV-ES/SEV-SNP save area to match the APM. This save
area will be used for the upcoming SEV-SNP AP Creation NAE event support.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-5-brijesh.singh@amd.com
|
|
The initial implementation of the GHCB spec was based on trying to keep
the register state offsets the same relative to the VM save area. However,
the save area for SEV-ES has changed within the hardware causing the
relation between the SEV-ES save area to change relative to the GHCB save
area.
This is the second step in defining the multiple save areas to keep them
separate and ensuring proper operation amongst the different types of
guests. Create a GHCB save area that matches the GHCB specification.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220307213356.2797205-4-brijesh.singh@amd.com
|
|
The save area for SEV-ES/SEV-SNP guests, as used by the hardware, is
different from the save area of a non SEV-ES/SEV-SNP guest.
This is the first step in defining the multiple save areas to keep them
separate and ensuring proper operation amongst the different types of
guests. Create an SEV-ES/SEV-SNP save area and adjust usage to the new
save area definition where needed.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Venu Busireddy <venu.busireddy@oracle.com>
Link: https://lore.kernel.org/r/20220405182743.308853-1-brijesh.singh@amd.com
|
|
Remove unnecessary casts.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220329102059.268983-1-yuzhe@nfschina.com
|
|
It is possible to take a stage-2 permission fault on a page larger than
PAGE_SIZE. For example, when running a guest backed by 2M HugeTLB, KVM
eagerly maps at the largest possible block size. When dirty logging is
enabled on a memslot, KVM does *not* eagerly split these 2M stage-2
mappings and instead clears the write bit on the pte.
Since dirty logging is always performed at PAGE_SIZE granularity, KVM
lazily splits these 2M block mappings down to PAGE_SIZE in the stage-2
fault handler. This operation must be done under the write lock. Since
commit f783ef1c0e82 ("KVM: arm64: Add fast path to handle permission
relaxation during dirty logging"), the stage-2 fault handler
conditionally takes the read lock on permission faults with dirty
logging enabled. To that end, it is possible to split a 2M block mapping
while only holding the read lock.
The problem is demonstrated by running kvm_page_table_test with 2M
anonymous HugeTLB, which splats like so:
WARNING: CPU: 5 PID: 15276 at arch/arm64/kvm/hyp/pgtable.c:153 stage2_map_walk_leaf+0x124/0x158
[...]
Call trace:
stage2_map_walk_leaf+0x124/0x158
stage2_map_walker+0x5c/0xf0
__kvm_pgtable_walk+0x100/0x1d4
__kvm_pgtable_walk+0x140/0x1d4
__kvm_pgtable_walk+0x140/0x1d4
kvm_pgtable_walk+0xa0/0xf8
kvm_pgtable_stage2_map+0x15c/0x198
user_mem_abort+0x56c/0x838
kvm_handle_guest_abort+0x1fc/0x2a4
handle_exit+0xa4/0x120
kvm_arch_vcpu_ioctl_run+0x200/0x448
kvm_vcpu_ioctl+0x588/0x664
__arm64_sys_ioctl+0x9c/0xd4
invoke_syscall+0x4c/0x144
el0_svc_common+0xc4/0x190
do_el0_svc+0x30/0x8c
el0_svc+0x28/0xcc
el0t_64_sync_handler+0x84/0xe4
el0t_64_sync+0x1a4/0x1a8
Fix the issue by only acquiring the read lock if the guest faulted on a
PAGE_SIZE granule w/ dirty logging enabled. Add a WARN to catch locking
bugs in future changes.
Fixes: f783ef1c0e82 ("KVM: arm64: Add fast path to handle permission relaxation during dirty logging")
Cc: Jing Zhang <jingzhangos@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220401194652.950240-1-oupton@google.com
|
|
We already sanitize the guest's PSCI version when it is being written by
userspace, rejecting unsupported version numbers. Additionally, the
'minor' parameter to kvm_psci_1_x_call() is a constant known at compile
time for all callsites.
Though it is benign, the additional check against the
PSCI kvm_psci_1_x_call() is unnecessary and likely to be missed the next
time KVM raises its maximum PSCI version. Drop the check altogether and
rely on sanitization when the PSCI version is set by userspace.
No functional change intended.
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220322183538.2757758-4-oupton@google.com
|
|
The SMCCC does not allow the SMC64 calling convention to be used from
AArch32. While KVM checks to see if the calling convention is allowed in
PSCI_1_0_FN_PSCI_FEATURES, it does not actually prevent calls to
unadvertised PSCI v1.0+ functions.
Hoist the check to see if the requested function is allowed into
kvm_psci_call(), thereby preventing SMC64 calls from AArch32 for all
PSCI versions.
Fixes: d43583b890e7 ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest")
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220322183538.2757758-3-oupton@google.com
|
|
The only valid calling SMC calling convention from an AArch32 state is
SMC32. Disallow any PSCI function that sets the SMC64 function ID bit
when called from AArch32 rather than comparing against known SMC64 PSCI
functions.
Note that without this change KVM advertises the SMC64 flavor of
SYSTEM_RESET2 to AArch32 guests.
Fixes: d43583b890e7 ("KVM: arm64: Expose PSCI SYSTEM_RESET2 call to the guest")
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220322183538.2757758-2-oupton@google.com
|
|
This activates display drivers that give console on the
different U8500 mobile phones, the GNSS subsystem and the
SIRF GNSS driver so we can manage the GPS chips, the regulator
LEDs as used in some phones and one more IIO light sensor driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The gpio1 0 pin is controlling CAN termination, not USB H1 VBUS. So,
remove wrong regulator and assign this gpio to new DT CAN termination
property.
Signed-off-by: David Jander <david@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
This series of devices is using lg,lb070wv8 instead of kyo,tcg121xglp.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Interrupt counter is mainlined, now we can add missing counter nodes.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
Julia Lawall
Johan Hovold
Ashish Singhal
Peng Fan
Aniruddha Rao
Michael Walle
Felix Fietkau
Andrej Picej
Alexander Bauer
Alexander Stein
Oleksij Rempel
Linus Walleij
Reiji Watanabe
Brijesh Singh
Heiko Carstens
Michael Roth
Joey Gouly
Tom Lendacky
Yu Zhe
Oliver Upton
David Jander
Robin van der Gracht