| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* pm-cpuidle:
doc: trace: fix reference to cpuidle documentation file
cpuidle / Documentation: Update cpuidle MAINTAINERS entry
* pm-cpufreq:
cpufreq: scmi: Fix frequency invariance in slow path
cpufreq: check if policy is inactive early in __cpufreq_get()
cpufreq: scpi/scmi: Fix freeing of dynamic OPPs
cpufreq / Documentation: Update cpufreq MAINTAINERS entry
* pm-sleep:
PM: sleep: call devfreq suspend/resume
|
|
Cast autosuspend_delay to u64 to make sure that the full computation
of 'expires' or slack will be done in u64, even on 32bits arch.
Otherwise, any delay greater than 2^31 nsec can overflow if signed
32bits is used when converting delay from msec to nsec.
Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers)
Reported-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
PM-runtime now uses the hrtimers infrastructure for autosuspend, however
comments still reference 'jiffies'.
Fixes: 8234f6734c5d (PM-runtime: Switch autosuspend over to using hrtimers)
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Devfreq framework supports suspend of its devices.
Call the the devfreq interface and allow devfreq devices
preserve/restore their states during suspend/resume.
Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- new %ptR printk format
- rename core files
- allow registration of multiple nvmem devices
New driver:
- i.MX system controller RTC
Driver updates:
- abx80x: handle voltage ioctls, correct binding doc
- m41t80: correct month in alarm reads
- pcf85363: add pcf85263 support
- pcf8523: properly handle battery low flag
- s3c: limit alarm to one year in the future as ALMYEAR is broken
- sun6i: rework clock output binding"
* tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits)
rtc: rename core files
rtc: nvmem: fix possible use after free
rtc: add i.MX system controller RTC support
dt-bindings: fsl: scu: add rtc binding
rtc: pcf2123: Add Microcrystal rv2123
rtc: class: reimplement devm_rtc_device_register
rtc: enforce rtc_timer_init private_data type
rtc: abx80x: Implement RTC_VL_READ,CLR ioctls
rtc: pcf85363: Add support for NXP pcf85263 rtc
dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock
rtc: pcf8523: don't return invalid date when battery is low
dt-bindings: rtc: use a generic node name for ds1307
PM: Switch to use %ptR
m68k/mac: Switch to use %ptR
Input: hp_sdc_rtc - Switch to use %ptR
rtc: tegra: Switch to use %ptR
rtc: s5m: Switch to use %ptR
rtc: s3c: Switch to use %ptR
rtc: rx8025: Switch to use %ptR
rtc: rx6110: Switch to use %ptR
...
|
|
* pm-core:
PM-runtime: Switch autosuspend over to using hrtimers
* pm-qos:
PM / QoS: Change to use DEFINE_SHOW_ATTRIBUTE macro
* pm-domains:
PM / Domains: remove define_genpd_open_function() and define_genpd_debugfs_fops()
* pm-sleep:
PM / sleep: convert to DEFINE_SHOW_ATTRIBUTE
|
|
We already have the DEFINE_SHOW_ATTRIBUTE, There is no need to define
such a macro, so remove define_genpd_open_function and
define_genpd_debugfs_fops.
Convert them to DEFINE_SHOW_ATTRIBUTE.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
PM-runtime uses the timer infrastructure for autosuspend. This implies
that the minimum time before autosuspending a device is in the range
of 1 tick included to 2 ticks excluded
-On arm64 this means between 4ms and 8ms with default jiffies
configuration
-And on arm, it is between 10ms and 20ms
These values are quite high for embedded systems which sometimes want
the duration to be in the range of 1 ms.
It is possible to switch autosuspend over to using hrtimers to get
finer granularity for short durations and take advantage of slack to
retain some margins and get long timeouts with minimum wakeups.
On an arm64 platform that uses 1ms for autosuspending timeout of its
GPU, idle power is reduced by 10% with hrtimer.
The latency impact on arm64 hikey octo cores is:
- mark_last_busy: from 1.11 us to 1.25 us
- rpm_suspend: from 15.54 us to 15.38 us
[Only the code path of rpm_suspend() that starts hrtimer has been
measured.]
arm64 image (arm64 default defconfig) decreases by around 3KB
with following details:
$ size vmlinux-timer
text data bss dec hex filename
12034646 6869268 386840 19290754 1265a82 vmlinux
$ size vmlinux-hrtimer
text data bss dec hex filename
12030550 6870164 387032 19287746 1264ec2 vmlinux
The latency impact on arm 32bits snowball dual cores is :
- mark_last_busy: from 0.31 us usec to 0.77 us
- rpm_suspend: from 6.83 us to 6.67 usec
The increase of the image for snowball platform that I used for
testing performance impact, is neglictable (244B).
$ size vmlinux-timer
text data bss dec hex filename
7157961 2119580 264120 9541661 91981d build-ux500/vmlinux
size vmlinux-hrtimer
text data bss dec hex filename
7157773 2119884 264248 9541905 919911 vmlinux-hrtimer
And arm 32bits image (multi_v7_defconfig) increases by around 1.7KB
with following details:
$ size vmlinux-timer
text data bss dec hex filename
13304443 6803420 402768 20510631 138f7a7 vmlinux
$ size vmlinux-hrtimer
text data bss dec hex filename
13304299 6805276 402768 20512343 138fe57 vmlinux
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently a genpd only handles the performance state requirements from
the devices under its control. This commit extends that to also handle
the performance state requirement(s) put on the master genpd by its
sub-domains. There is a separate value required for each master that
the genpd has and so a new field is added to the struct gpd_link
(link->performance_state), which represents the link between a genpd and
its master. The struct gpd_link also got another field
prev_performance_state, which is used by genpd core as a temporary
variable during transitions.
On a call to dev_pm_genpd_set_performance_state(), the genpd core first
updates the performance state of the masters of the device's genpd and
then updates the performance state of the genpd. The masters do the same
and propagate performance state updates to their masters before updating
their own. The performance state transition from genpd to its master is
done with the help of dev_pm_opp_xlate_performance_state(), which looks
at the OPP tables of both the domains to translate the state.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Separate out _genpd_set_performance_state() and
_genpd_reeval_performance_state() from
dev_pm_genpd_set_performance_state() to handle performance state update
related stuff. This will be used by a later commit.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
dev_pm_genpd_set_performance_state() will be required to call
dev_pm_opp_xlate_performance_state() going forward to translate from
performance state of a sub-domain to performance state of its master.
And dev_pm_opp_xlate_performance_state() needs pointers to the OPP
tables of both genpd and its master.
Lets fetch and save them while the OPP tables are added. Fetching the
OPP tables should never fail as we just added the OPP tables and so add
a WARN_ON() for such a bug instead of full error paths.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
It's quite questionable whether genpd internally should care about if the
corresponding PM domain for a device is powered on, as to allow setting a
new performance state for it. The assumptions creates an unnecessary
limitation at this point, for both consumers and providers, but more
importantly it also makes the code more complicated.
Therefore, let's simplify the code to allow setting a performance state, by
invoking the ->set_performance_state() callback, no matter whether the PM
domain is powered on or off.
Do note, this change means genpd providers needs to restore the performance
state themselves during power on, via the ->power_on() callback. Moreover,
they may also need to check that the PM domain is powered on, from their
->set_performance_state() callback, before deciding to update the state.
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Use %ptR instead of open coded variant to print content of
struct rtc_time in human readable format.
Cc: linux-pm@vger.kernel.org
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
The OPP core already has the performance state values for each of the
genpd's OPPs and there is no need to call the genpd callback again to
get the performance state for the case where the end device doesn't have
an OPP table and has the "required-opps" property directly in its node.
This commit renames of_genpd_opp_to_performance_state() as
of_get_required_opp_performance_state() and moves it to the OPP core, as
it is all about OPP stuff now.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
The OPP core currently stores the performance state in the consumer
device's OPP table, but that is going to change going forward and
performance state will rather be set directly in the genpd's OPP table.
For that we need to get the performance state for genpd's device
structure (genpd->dev) instead of the consumer device's structure. Add a
new helper to do that.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
There are several struct device instances that genpd core handles. The
most common one is the consumer device structure, which is named
(correctly) as "dev" within genpd core. The second one is the genpd's
device structure, referenced as genpd->dev. The third one is the virtual
device structures created by the genpd core to represent the consumer
device for multiple power domain case, currently named as genpd_dev. The
naming of these virtual devices isn't very clear or readable and it
looks more like the genpd->dev.
Rename the virtual device instances within the genpd core as "virt_dev".
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
A caller of pm_genpd_init() that provides some states for the genpd via the
->states pointer in the struct generic_pm_domain, should also provide a
governor. This because it's the job of the governor to pick a state that
satisfies the constraints.
Therefore, let's print a warning to inform the user about such bogus
configuration and avoid to bail out, by instead picking the shallowest
state before genpd invokes the ->power_off() callback.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Instead of returning -EINVAL from of_genpd_parse_idle_states() in case none
compatible states was found, let's return 0 to indicate success. Assign
also the out-parameter *states to NULL and *n to 0, to indicate to the
caller that zero states have been found/allocated.
This enables the caller of of_genpd_parse_idle_states() to easier act on
the returned error code.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If __device_suspend() runs asynchronously (in which case the device
passed to it is in dpm_suspended_list at that point) and it returns
early on an error or pending wakeup, and the power.direct_complete
flag has been set for the device already, the subsequent
device_resume() will be confused by that and it will call
pm_runtime_enable() incorrectly, as runtime PM has not been
disabled for the device by __device_suspend().
To avoid that, clear power.direct_complete if __device_suspend()
is not going to disable runtime PM for the device before returning.
Fixes: aae4518b3124 (PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily)
Reported-by: Al Cooper <alcooperx@gmail.com>
Tested-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: 3.16+ <stable@vger.kernel.org> # 3.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
"count" needs to be signed for the error handling to work. I made "i"
signed as well so they match.
Fixes: 02113ba93ea4 (PM / clk: Add support for obtaining clocks from device-tree)
Cc: 4.6+ <stable@vger.kernel.org> # 4.6+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull driver core updates from Greg KH:
"Here are all of the driver core and related patches for 4.19-rc1.
Nothing huge here, just a number of small cleanups and the ability to
now stop the deferred probing after init happens.
All of these have been in linux-next for a while with only a merge
issue reported"
* tag 'driver-core-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (21 commits)
base: core: Remove WARN_ON from link dependencies check
drivers/base: stop new probing during shutdown
drivers: core: Remove glue dirs from sysfs earlier
driver core: remove unnecessary function extern declare
sysfs.h: fix non-kernel-doc comment
PM / Domains: Stop deferring probe at the end of initcall
iommu: Remove IOMMU_OF_DECLARE
iommu: Stop deferring probe at end of initcalls
pinctrl: Support stopping deferred probe after initcalls
dt-bindings: pinctrl: add a 'pinctrl-use-default' property
driver core: allow stopping deferred probe after init
driver core: add a debugfs entry to show deferred devices
sysfs: Fix internal_create_group() for named group updates
base: fix order of OF initialization
linux/device.h: fix kernel-doc notation warning
Documentation: update firmware loader fallback reference
kobject: Replace strncpy with memcpy
drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number
kernfs: Replace strncpy with memcpy
device: Add #define dev_fmt similar to #define pr_fmt
...
|
|
We need the driver core changes in here as well for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
All PM domain drivers must be built-in (at least those using DT), so
there is no point deferring probe after initcalls are done. Continuing
to defer probe may prevent booting successfully even if managing PM
domains is not required. This can happen if the user failed to enable
the driver or if power-domains are added to a platform's DT, but there
is not yet a driver (e.g. a new DTB with an old kernel).
Call the driver core function driver_deferred_probe_check_init_done()
instead of just returning -EPROBE_DEFER to stop deferring probe when
initcalls are done.
Acked-by: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For the multiple PM domain case, let's introduce a new API called
dev_pm_domain_attach_by_name(). This allows a consumer driver to associate
its device with one of its PM domains, by using a name based lookup.
Do note that, currently it's only genpd that supports multiple PM domains
per device, but dev_pm_domain_attach_by_name() can easily by extended to
cover other PM domain types, if/when needed.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For the multiple PM domain case, let's introduce a new function called
genpd_dev_pm_attach_by_name(). This allows a device to be associated with
its PM domain through genpd, by using a name based lookup.
Note that, genpd_dev_pm_attach_by_name() shall only be called by the driver
core / PM core, similar to how the existing dev_pm_domain_attach_by_id()
makes use of genpd_dev_pm_attach_by_id(). However, this is implemented by
following changes on top.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are no legacy behavior in drivers to consider while attaching a
device to genpd - for the multiple PM domain case.
For that reason, let's instead require the driver to runtime resume the
device, via calling pm_runtime_get_sync() for example, when it needs to
power on the corresponding PM domain.
This allows us to improve the situation during attach. Instead of always
power on the PM domain, which may be unnecessary, let's leave it in its
current state. Additionally, to avoid the PM domain to stay powered on,
let's schedule a power off work.
Fixes: 3c095f32a92b (PM / Domains: Add support for multi PM domains ...)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The DT node passed here isn't necessarily an OPP node, as this routine
can also be used for cases where the "required-opps" property is present
directly in the device's node. Rename it.
This also removes a stale comment.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Additional updates of the generic power domains (genpd) framework
(support for devices attached to multiple domains) and the cpupower
utility (minor fixes) for 4.18-rc1.
* pm-domains:
PM / Domains: Add dev_pm_domain_attach_by_id() to manage multi PM domains
PM / Domains: Add support for multi PM domains per device to genpd
PM / Domains: Split genpd_dev_pm_attach()
PM / Domains: Don't attach devices in genpd with multi PM domains
PM / Domains: dt: Allow power-domain property to be a list of specifiers
* pm-tools:
cpupower : Fix header name to read idle state name
cpupower: fix spelling mistake: "logilename" -> "logfilename"
|
|
Revert commit 1e8378619841 (PM / runtime: Fixup reference counting of
device link suppliers at probe), as it has introduced a regression
and the condition it was designed to address should be covered by the
existing code.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently we export event_count instead of wakeup_count via the
per-device wakeup_count sysfs attribute. Change it to wakeup_count
to make it more meaningful.
wakeup_count increments only when events_check_enabled is set,
that is whenever writes the current wakeup count to
/sys/power/wakeup_count. Also events_check_enabled is cleared on
every resume. User space is expected to write to this just before
suspend. This way pm_wakeup_event(), when called from IRQs handles,
will increment wakeup_count only if we are in system-wide
suspend-resume cycle and should give a fair approximation of how many
times a device may have triggered a wakeup from system suspend.
event_count on the other hand will increment every time
pm_wakeup_event() is called irrespective of whether we are in a
suspend-resume cycle and some drivers call it on every interrupt
which makes it less useful for system wakeup tracking.
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
[ rjw: Subject & changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The existing dev_pm_domain_attach() function, allows a single PM domain to
be attached per device. To be able to support devices that are partitioned
across multiple PM domains, let's introduce a new interface,
dev_pm_domain_attach_by_id().
The dev_pm_domain_attach_by_id() returns a new allocated struct device with
the corresponding attached PM domain. This enables for example a driver to
operate on the new device from a power management point of view. The driver
may then also benefit from using the received device, to set up so called
device-links towards its original device. Depending on the situation, these
links may then be dynamically changed.
The new interface is typically called by drivers during their probe phase,
in case they manages devices which uses multiple PM domains. If that is the
case, the driver also becomes responsible of managing the detaching of the
PM domains, which typically should be done at the remove phase. Detaching
is done by calling the existing dev_pm_domain_detach() function and for
each of the received devices from dev_pm_domain_attach_by_id().
Note, currently its only genpd that supports multiple PM domains per
device, but dev_pm_domain_attach_by_id() can easily by extended to cover
other PM domain types, if/when needed.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To support devices being partitioned across multiple PM domains, let's
begin with extending genpd to cope with these kind of configurations.
Therefore, add a new exported function genpd_dev_pm_attach_by_id(), which
is similar to the existing genpd_dev_pm_attach(), but with the difference
that it allows its callers to provide an index to the PM domain that it
wants to attach.
Note that, genpd_dev_pm_attach_by_id() shall only be called by the driver
core / PM core, similar to how the existing dev_pm_domain_attach() makes
use of genpd_dev_pm_attach(). However, this is implemented by following
changes on top.
Because, only one PM domain can be attached per device, genpd needs to
create a virtual device that it can attach/detach instead. More precisely,
let the new function genpd_dev_pm_attach_by_id() register a virtual struct
device via calling device_register(). Then let it attach this device to the
corresponding PM domain, rather than the one that is provided by the
caller. The actual attaching is done via re-using the existing genpd OF
functions.
At successful attachment, genpd_dev_pm_attach_by_id() returns the created
virtual device, which allows the caller to operate on it to deal with power
management. Following changes on top, provides more details in this
regards.
To deal with detaching of a PM domain for the multiple PM domains case,
let's also extend the existing genpd_dev_pm_detach() function, to cover the
cleanup of the created virtual device, via make it call device_unregister()
on it. In this way, there is no need to introduce a new function to deal
with detach for the multiple PM domain case, but instead the existing one
is re-used.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To extend genpd to deal with allowing multiple PM domains per device, some
of the code in genpd_dev_pm_attach() can be re-used. Let's prepare for this
by moving some of the code into a sub-function.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The power-domain DT property may now contain a list of PM domain
specifiers, which represents that a device are partitioned across multiple
PM domains. This leads to a new situation in genpd_dev_pm_attach(), as only
one PM domain can be attached per device.
To remain things simple for the most common configuration, when a single PM
domain is used, let's treat the multiple PM domain case as being specific.
In other words, let's change genpd_dev_pm_attach() to check for multiple PM
domains and prevent it from attach any PM domain for this case. Instead,
leave this to be managed separately, from following changes to genpd.
Suggested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* pm-pci:
PCI / PM: Clean up outdated comments in pci_target_state()
PCI / PM: Do not clear state_saved for devices that remain suspended
* acpi-pm:
ACPI: EC: Dispatch the EC GPE directly on s2idle wake
ACPICA: Introduce acpi_dispatch_gpe()
* pm-sleep:
PM / hibernate: Fix oops at snapshot_write()
PM / wakeup: Make s2idle_lock a RAW_SPINLOCK
PM / s2idle: Make s2idle_wait_head swait based
PM / wakeup: Make events_lock a RAW_SPINLOCK
PM / suspend: Prevent might sleep splats
* pm-avs:
PM / AVS: rockchip-io: add io selectors and supplies for PX30
|
|
* pm-opp: (24 commits)
PM / Domains: Drop unused parameter in genpd_allocate_dev_data()
PM / Domains: Drop genpd as in-param for pm_genpd_remove_device()
PM / Domains: Drop __pm_genpd_add_device()
PM / Domains: Drop extern declarations of functions in pm_domain.h
PM / domains: Add perf_state attribute to genpd debugfs
OPP: Allow same OPP table to be used for multiple genpd
PM / Domain: Return 0 on error from of_genpd_opp_to_performance_state()
PM / OPP: Fix shared OPP table support in dev_pm_opp_register_set_opp_helper()
PM / OPP: Fix shared OPP table support in dev_pm_opp_set_regulators()
PM / OPP: Fix shared OPP table support in dev_pm_opp_set_prop_name()
PM / OPP: Fix shared OPP table support in dev_pm_opp_set_supported_hw()
PM / OPP: silence an uninitialized variable warning
PM / OPP: Remove dev_pm_opp_{un}register_get_pstate_helper()
PM / OPP: Get performance state using genpd helper
PM / Domain: Implement of_genpd_opp_to_performance_state()
PM / Domain: Add support to parse domain's OPP table
PM / Domain: Add struct device to genpd
PM / OPP: Implement dev_pm_opp_get_of_node()
PM / OPP: Implement of_dev_pm_opp_find_required_opp()
PM / OPP: Implement dev_pm_opp_of_add_table_indexed()
...
|
|
* pm-domains:
PM / domains: Improve wording of dev_pm_domain_attach() comment
PM / Domains: Don't return -EEXIST at attach when PM domain exists
spi: Respect all error codes from dev_pm_domain_attach()
soundwire: Respect all error codes from dev_pm_domain_attach()
mmc: sdio: Respect all error codes from dev_pm_domain_attach()
i2c: Respect all error codes from dev_pm_domain_attach()
driver core: Respect all error codes from dev_pm_domain_attach()
amba: Respect all error codes from dev_pm_domain_attach()
PM / Domains: Allow a better error handling of dev_pm_domain_attach()
PM / Domains: Check for existing PM domain in dev_pm_domain_attach()
PM / Domains: Drop redundant code in genpd while attaching devices
PM / Domains: Drop comment in genpd about legacy Samsung DT binding
PM / Domains: Fix error path during attach in genpd
|
|
The in-parameter struct generic_pm_domain *genpd to
genpd_allocate_dev_data() is unused, so let's drop it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is no need to pass a genpd struct to pm_genpd_remove_device(), as we
already have the information about the PM domain (genpd) through the device
structure.
Additionally, we don't allow to remove a PM domain from a device, other
than the one it may have assigned to it, so really it does not make sense
to have a separate in-param for it.
For these reason, drop it and update the current only call to
pm_genpd_remove_device() from amdgpu_acp.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There are still a few non-DT existing users of genpd, however neither of
them uses __pm_genpd_add_device(), hence let's drop it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
Now that genpd supports performance states, add this additional
attribute as part of the power domains debugfs entry, to display
the current performance state for the Power domain.
Suggested-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In the case consumer device is runtime resumed, while the link to the
supplier is removed, the earlier call to pm_runtime_get_sync() made from
rpm_get_suppliers() does not get properly balanced with a corresponding
call to pm_runtime_put(). This leads to that suppliers remains to be
runtime resumed forever, while they don't need to.
Let's fix the behaviour by calling rpm_put_suppliers() when dropping a
device link. Not that, since rpm_put_suppliers() checks the
link->rpm_active flag, we can correctly avoid to call pm_runtime_put() in
cases when we shouldn't.
Reported-by: Todor Tomov <todor.tomov@linaro.org>
Fixes: 21d5c57b3726 (PM / runtime: Use device links)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In the driver core, before it invokes really_probe() it runtime resumes the
suppliers for the device via calling pm_runtime_get_suppliers(), which also
increases the runtime PM usage count for each of the available supplier.
This makes sense, as to be able to allow the consumer device to be probed
by its driver. However, if the driver decides to add a new supplier link
during ->probe(), hence updating the list of suppliers, the following call
to pm_runtime_put_suppliers(), invoked after really_probe() in the driver
core, we get into trouble.
More precisely, pm_runtime_put() gets called also for the new supplier(s),
which is wrong as the driver core, didn't trigger pm_runtime_get_sync() to
be called for it in the first place. In other words, the new supplier may
be runtime suspended even in cases when it shouldn't.
Fix this behaviour, by runtime resume suppliers according to the same
conditions as managed by the runtime PM core, when runtime resume callbacks
are being invoked.
Additionally, don't try to runtime suspend any of the suppliers after
really_probe(), but instead rely on that to happen via the consumer device,
when it becomes runtime suspended.
Fixes: 21d5c57b3726 (PM / runtime: Use device links)
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The `events_lock' is acquired during suspend while interrupts are
disabled even on RT. The lock is taken only for a very brief moment.
Make it a RAW lock which avoids "sleeping while atomic" warnings on RT.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
of_genpd_opp_to_performance_state() should return 0 on errors, as its
doc comment describes. While it follows that mostly, it returns a
negative error number on one of the failures.
Fix that.
Fixes: 6e41766a6a50 "PM / Domain: Implement of_genpd_opp_to_performance_state()"
Reported-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The message printed by pm_wakeup_pending() on wakeup detection is
not very useful if someone is not interested specifically in
debugging wakeup, so turn it into a pm_debug() one.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 08810a4119aa (PM / core: Add NEVER_SKIP and SMART_PREPARE
driver flags) inadvertently prevented the power.direct_complete flag
from being set for devices without PM callbacks and with disabled
runtime PM which also prevents power.direct_complete from being set
for their parents. That led to problems including a resume crash on
HP ZBook 14u.
Restore the previous behavior by causing power.direct_complete to be
set for those devices again, but do that in a more direct way to
avoid overlooking that case in the future.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199693
Fixes: 08810a4119aa (PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags)
Reported-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
Cc: 4.15+ <stable@vger.kernel.org> # 4.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
|
|
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
Rafael J. Wysocki
Vincent Guittot
Ladislav Michl
Lukasz Luba
Linus Torvalds
Yangtao Li
Viresh Kumar
Ulf Hansson
Andy Shevchenko
Dan Carpenter
Greg Kroah-Hartman
Rob Herring
Ravi Chandra Sadineni
Rajendra Nayak
Sebastian Andrzej Siewior
Geert Uytterhoeven