| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Platforms can provide the information about the availability of each
idle states via status flag. Platforms may have to disable one or more
idle states for various reasons like broken firmware or other unmet
dependencies.
Fix handling of such unavailable/disabled idle states by ignoring them
while parsing the states.
Fixes: a3381e3a65cb ("PM / domains: Fix up domain-idle-states OF parsing")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Always-on PM domains must be on during initialisation or the domain is
currently silently rejected.
Print an error message in case an always-on domain is not on to make it
easier to debug drivers getting this wrong (e.g. by setting an always-on
genpd flag without making sure that the state matches).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge cpuidle changes, PM core changes and power capping changes for
6.1-rc1:
- Add AlderLake-N support to intel_idle (Zhang Rui).
- Replace strlcpy() with unused retval with strscpy() in intel_idle
(Wolfram Sang).
- Remove redundant check from cpuidle_switch_governor() (Yu Liao).
- Replace strlcpy() with unused retval with strscpy() in the powernv
cpuidle driver (Wolfram Sang).
- Drop duplicate word from a comment in the coupled cpuidle driver
(Jason Wang).
- Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it
in the flags and the device is about to resume (Rafael Wysocki).
- Add extra debugging statement for multiple active IRQs to system
wakeup handling code (Mario Limonciello).
- Replace strlcpy() with unused retval with strscpy() in the core
system suspend support code (Wolfram Sang).
- Update the intel_rapl power capping driver:
* Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui).
* Add support for RAPTORLAKE_S (Zhang Rui).
* Fix UBSAN shift-out-of-bounds issue (Chao Qin).
* pm-cpuidle:
intel_idle: Add AlderLake-N support
cpuidle: Remove redundant check in cpuidle_switch_governor()
intel_idle: move from strlcpy() with unused retval to strscpy()
cpuidle: powernv: move from strlcpy() with unused retval to strscpy()
cpuidle: coupled: Drop duplicate word from a comment
* pm-core:
PM: runtime: Return -EINPROGRESS from rpm_resume() in the RPM_NOWAIT case
* pm-sleep:
PM: wakeup: Add extra debugging statement for multiple active IRQs
PM: suspend: move from strlcpy() with unused retval to strscpy()
* powercap:
powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
powercap: intel_rapl: Add support for RAPTORLAKE_S
|
|
The prospective callers of rpm_resume() passing RPM_NOWAIT to it may
be confused when it returns 0 without actually resuming the device
which may happen if the device is suspending at the given time and it
will only resume when the suspend in progress has completed. To avoid
that confusion, return -EINPROGRESS from rpm_resume() in that case.
Since none of the current callers passing RPM_NOWAIT to rpm_resume()
check its return value, this change has no functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Since commit cb1f65c1e1424 ("PM: s2idle: ACPI: Fix wakeup interrupts
handling") was introduced the kernel can now handle multiple
simultaneous interrupts during wakeup. Ths uncovered some existing
subtle firmware bugs where multiple IRQs are unintentionally active.
To help with fixing those bugs add an extra message when PM debugging
is enabled that can show the individual IRQs triggered as if a variety
are fired they'll potentially be lost as /sys/power/pm_wakeup_irq only
contains the first one that triggered the wakeup after resume is
complete but all may be needed to demonstrate the whole picture.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215770
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
[ rjw: Added empty line after if () ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
This reverts commit 5a46079a96451cfb15e4f5f01f73f7ba24ef851a.
Quite a few issues have been reported [1][2][3][4][5][6] on the original
commit. While about half of them have been fixed, I'll need to fix the rest
before driver_deferred_probe_check_state() can be deleted. So, revert the
deletion for now.
[1] - https://lore.kernel.org/all/DU0PR04MB941735271F45C716342D0410886B9@DU0PR04MB9417.eurprd04.prod.outlook.com/
[2] - https://lore.kernel.org/all/CM6REZS9Z8AC.2KCR9N3EFLNQR@otso/
[3] - https://lore.kernel.org/all/CAD=FV=XYVwaXZxqUKAuM5c7NiVjFz5C6m6gAHSJ7rBXBF94_Tg@mail.gmail.com/
[4] - https://lore.kernel.org/all/Yvpd2pwUJGp7R+YE@euler/
[5] - https://lore.kernel.org/lkml/20220601070707.3946847-2-saravanak@google.com/
[6] - https://lore.kernel.org/all/CA+G9fYt_cc5SiNv1Vbse=HYY_+uc+9OYPZuJ-x59bROSaLN6fw@mail.gmail.com/
Fixes: 5a46079a9645 ("PM: domains: Delete usage of driver_deferred_probe_check_state()")
Reported-by: Peng Fan <peng.fan@nxp.com>
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Reported-by: Doug Anderson <dianders@chromium.org>
Reported-by: Colin Foster <colin.foster@in-advantage.com>
Reported-by: Tony Lindgren <tony@atomide.com>
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20220819221616.2107893-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull driver core / kernfs updates from Greg KH:
"Here is the set of driver core and kernfs changes for 6.0-rc1.
The "biggest" thing in here is some scalability improvements for
kernfs for large systems. Other than that, included in here are:
- arch topology and cache info changes that have been reviewed and
discussed a lot.
- potential error path cleanup fixes
- deferred driver probe cleanups
- firmware loader cleanups and tweaks
- documentation updates
- other small things
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits)
docs: embargoed-hardware-issues: fix invalid AMD contact email
firmware_loader: Replace kmap() with kmap_local_page()
sysfs docs: ABI: Fix typo in comment
kobject: fix Kconfig.debug "its" grammar
kernfs: Fix typo 'the the' in comment
docs: driver-api: firmware: add driver firmware guidelines. (v3)
arch_topology: Fix cache attributes detection in the CPU hotplug path
ACPI: PPTT: Leave the table mapped for the runtime usage
cacheinfo: Use atomic allocation for percpu cache attributes
drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
MAINTAINERS: Change mentions of mpm to olivia
docs: ABI: sysfs-devices-soc: Update Lee Jones' email address
docs: ABI: sysfs-class-pwm: Update Lee Jones' email address
Documentation/process: Add embargoed HW contact for LLVM
Revert "kernfs: Change kernfs_notify_list to llist."
ACPI: Remove the unused find_acpi_cpu_cache_topology()
arch_topology: Warn that topology for nested clusters is not supported
arch_topology: Add support for parsing sockets in /cpu-map
arch_topology: Set cluster identifier in each core/thread from /cpu-map
arch_topology: Limit span of cpu_clustergroup_mask()
...
|
|
Merge core device power management changes for v5.20-rc1:
- Extend support for wakeirq to callback wrappers used during system
suspend and resume (Ulf Hansson).
- Defer waiting for device probe before loading a hibernation image
till the first actual device access to avoid possible deadlocks
reported by syzbot (Tetsuo Handa).
- Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
Helgaas).
- Add Raptor Lake-P to the list of processors supported by the Intel
RAPL driver (George D Sworo).
- Add Alder Lake-N and Raptor Lake-P to the list of processors for
which Power Limit4 is supported in the Intel RAPL driver (Sumeet
Pawnikar).
- Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
attempting to remove it (Hsin-Yi Wang).
- Change the Energy Model code to represent power in micro-Watts and
adjust its users accordingly (Lukasz Luba).
* pm-core:
PM: runtime: Extend support for wakeirq for force_suspend|resume
* pm-sleep:
PM: hibernate: defer device probing when resuming from hibernation
PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP
* powercap:
powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
powercap: intel_rapl: Add support for RAPTORLAKE_P
* pm-domains:
PM: domains: Ensure genpd_debugfs_dir exists before remove
* pm-em:
cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
firmware: arm_scmi: Get detailed power scale from perf
Documentation: EM: Switch to micro-Watts scale
PM: EM: convert power field to micro-Watts precision and align drivers
|
|
Both genpd_debug_add() and genpd_debug_remove() may be called
indirectly by other drivers while genpd_debugfs_dir is not yet
set. For example, drivers can call pm_genpd_init() in probe or
pm_genpd_init() in probe fail/cleanup path:
pm_genpd_init()
--> genpd_debug_add()
pm_genpd_remove()
--> genpd_remove()
--> genpd_debug_remove()
At this time, genpd_debug_init() may not yet be called.
genpd_debug_add() checks that if genpd_debugfs_dir is NULL, it
will return directly. Make sure this is also checked
in pm_genpd_remove(), otherwise components under debugfs root
which has the same name as other components under pm_genpd may
be accidentally removed, since NULL represents debugfs root.
Fixes: 718072ceb211 ("PM: domains: create debugfs nodes when adding power domains")
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
A driver that makes use of pm_runtime_force_suspend|resume() to support
system suspend/resume, currently needs to manage the wakeirq support
itself. To avoid the boilerplate code in the driver's system suspend/resume
callbacks in particular, let's extend pm_runtime_force_suspend|resume() to
deal with the wakeirq.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Previously the CONFIG_PM_SLEEP and !CONFIG_PM_SLEEP device_init_wakeup()
implementations differed in confusing ways:
- The PM_SLEEP version checked for a NULL device pointer and returned
-EINVAL, while the !PM_SLEEP version did not and would simply
dereference a NULL pointer.
- When called with "false", the !PM_SLEEP version cleared "capable" and
"enable" in the opposite order of the PM_SLEEP version. That was
harmless because for !PM_SLEEP they're simple assignments, but it's
unnecessary confusion.
Use a simplified version of the PM_SLEEP implementation for both cases.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Because pm_runtime_get_suppliers() bumps up the rpm_active counter
of each device link to a supplier of the given device in addition
to bumping up the supplier's PM-runtime usage counter, a runtime
suspend of the consumer device may case the latter to go down to 0
when pm_runtime_put_suppliers() is running on a remote CPU. If that
happens after pm_runtime_put_suppliers() has released power.lock for
the consumer device, and a runtime resume of that device takes place
immediately after it, before pm_runtime_put() is called for the
supplier, that pm_runtime_put() call may cause the supplier to be
suspended even though the consumer is active.
To prevent that from happening, modify pm_runtime_get_suppliers() to
call pm_runtime_get_sync() for the given device's suppliers without
touching the rpm_active counters of the involved device links
Accordingly, modify pm_runtime_put_suppliers() to call pm_runtime_put()
for the given device's suppliers without looking at the rpm_active
counters of the device links at hand. [This is analogous to what
happened before commit 4c06c4e6cf63 ("driver core: Fix possible
supplier PM-usage counter imbalance").]
Since pm_runtime_get_suppliers() sets supplier_preactivated for each
device link where the supplier's PM-runtime usage counter has been
incremented and pm_runtime_put_suppliers() calls pm_runtime_put() for
the suppliers whose device links have supplier_preactivated set, the
PM-runtime usage counter is balanced for each supplier and this is
independent of the runtime suspend and resume of the consumer device.
However, in case a device link with DL_FLAG_PM_RUNTIME set is dropped
during the consumer device probe, so pm_runtime_get_suppliers() bumps
up the supplier's PM-runtime usage counter, but it cannot be dropped by
pm_runtime_put_suppliers(), make device_link_release_fn() take care of
that.
Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance")
Reported-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
|
|
Instead of passing an extra bool argument to pm_runtime_release_supplier(),
make its callers take care of triggering a runtime-suspend of the
supplier device as needed.
No expected functional impact.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
|
|
Now that fw_devlink=on by default and fw_devlink supports
"power-domains" property, the execution will never get to the point
where driver_deferred_probe_check_state() is called before the supplier
has probed successfully or before deferred probe timeout has expired.
So, delete the call and replace it with -ENODEV.
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20220601070707.3946847-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull thermal control updates from Rafael Wysocki:
"These add a thermal library and thermal tools to wrap the netlink
interface into event-based callbacks, improve overheat condition
handling during suspend-to-idle on Intel SoCs, add some new hardware
support, fix bugs and clean up code.
Specifics:
- Add thermal library and thermal tools to encapsulate the netlink
into event based callbacks (Daniel Lezcano, Jiapeng Chong).
- Improve overheat condition handling during suspend-to-idle in the
Intel PCH thermal driver (Zhang Rui).
- Use local ops instead of global ops in devfreq_cooling (Kant Fan).
- Clean up _OSC handling in int340x (Davidlohr Bueso).
- Switch hisi_termal from CONFIG_PM_SLEEP guards to pm_sleep_ptr()
(Hesham Almatary).
- Add new k3 j72xx bangdap driver and the corresponding bindings
(Keerthy).
- Fix missing of_node_put() in the SC iMX driver at probe time
(Miaoqian Lin).
- Fix memory leak in __thermal_cooling_device_register()
when device_register() fails by calling
thermal_cooling_device_destroy_sysfs() (Yang Yingliang).
- Add sc8180x and sc8280xp compatible string in the DT bindings and
lMH support for QCom tsens driver (Bjorn Andersson).
- Fix OTP Calibration Register values conforming to the documentation
on RZ/G2L and bindings documentation for RZ/G2UL (Biju Das).
- Fix type in kerneldoc description for __thermal_bind_params
(Corentin Labbe).
- Fix potential NULL dereference in sr_thermal_probe() on Broadcom
platform (Zheng Yongjun).
- Add change mode ops to the thermal-of sensor (Manaf Meethalavalappu
Pallikunhi).
- Fix non-negative value support by preventing the value to be clamp
to zero (Stefan Wahren).
- Add compatible string and DT bindings for MSM8960 tsens driver
(Dmitry Baryshkov).
- Add hwmon support for K3 driver (Massimiliano Minella).
- Refactor and add multiple generations support for QCom ADC driver
(Jishnu Prakash).
- Use platform_get_irq_optional() to get the interrupt on RCar driver
and document Document RZ/V2L bindings (Lad Prabhakar).
- Remove NULL check after container_of() call from the Intel HFI
thermal driver (Haowen Bai)"
* tag 'thermal-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (38 commits)
thermal: intel: pch: improve the cooling delay log
thermal: intel: pch: enhance overheat handling
thermal: intel: pch: move cooling delay to suspend_noirq phase
PM: wakeup: expose pm_wakeup_pending to modules
thermal: k3_j72xx_bandgap: Add the bandgap driver support
dt-bindings: thermal: k3-j72xx: Add VTM bindings documentation
thermal/drivers/imx_sc_thermal: Fix refcount leak in imx_sc_thermal_probe
thermal/core: Fix memory leak in __thermal_cooling_device_register()
dt-bindings: thermal: tsens: Add sc8280xp compatible
dt-bindings: thermal: lmh: Add Qualcomm sc8180x compatible
thermal/drivers/qcom/lmh: Add sc8180x compatible
thermal/drivers/rz2gl: Fix OTP Calibration Register values
dt-bindings: thermal: rzg2l-thermal: Document RZ/G2UL bindings
thermal: thermal_of: fix typo on __thermal_bind_params
tools/thermal: remove unneeded semicolon
tools/lib/thermal: remove unneeded semicolon
thermal/drivers/broadcom: Fix potential NULL dereference in sr_thermal_probe
tools/thermal: Add thermal daemon skeleton
tools/thermal: Add a temperature capture tool
tools/thermal: Add util library
...
|
|
Merge generlic power domains update for 5.19-rc1:
- Extend dev_pm_domain_detach() doc (Krzysztof Kozlowski).
- Move genpd's time-accounting to ktime_get_mono_fast_ns() (Ulf
Hansson).
- Improve the way genpd deals with its governors (Ulf Hansson).
* pm-domains:
PM: domains: Trust domain-idle-states from DT to be correct by genpd
PM: domains: Measure power-on/off latencies in genpd based on a governor
PM: domains: Allocate governor data dynamically based on a genpd governor
PM: domains: Clean up some code in pm_genpd_init() and genpd_remove()
PM: domains: Fix initialization of genpd's next_wakeup
PM: domains: Fixup QoS latency measurements for IRQ safe devices in genpd
PM: domains: Measure suspend/resume latencies in genpd based on governor
PM: domains: Move the next_wakeup variable into the struct gpd_timing_data
PM: domains: Allocate gpd_timing_data dynamically based on governor
PM: domains: Skip another warning in irq_safe_dev_in_sleep_domain()
PM: domains: Rename irq_safe_dev_in_no_sleep_domain() in genpd
PM: domains: Don't check PM_QOS_FLAG_NO_POWER_OFF in genpd
PM: domains: Drop redundant code for genpd always-on governor
PM: domains: Add GENPD_FLAG_RPM_ALWAYS_ON for the always-on governor
PM: domains: Move genpd's time-accounting to ktime_get_mono_fast_ns()
PM: domains: Extend dev_pm_domain_detach() doc
|
|
Merge PM core changes, updates related to system sleep and power capping
updates for 5.19-rc1:
- Export dev_pm_ops instead of suspend() and resume() in the IIO
chemical scd30 driver (Jonathan Cameron).
- Add namespace variants of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and
PM-runtime counterparts (Jonathan Cameron).
- Move symbol exports in the IIO chemical scd30 driver into the
IIO_SCD30 namespace (Jonathan Cameron).
- Avoid device PM-runtime usage count underflows (Rafael Wysocki).
- Allow dynamic debug to control printing of PM messages (David
Cohen).
- Fix some kernel-doc comments in hibernation code (Yang Li, Haowen
Bai).
- Preserve ACPI-table override during hibernation (Amadeusz Sławiński).
- Improve support for suspend-to-RAM for PSCI OSI mode (Ulf Hansson).
- Make Intel RAPL power capping driver support the RaptorLake and
AlderLake N processors (Zhang Rui, Sumeet Pawnikar).
- Remove redundant store to value after multiply in the RAPL power
capping driver (Colin Ian King).
* pm-core:
PM: runtime: Avoid device usage count underflows
iio: chemical: scd30: Move symbol exports into IIO_SCD30 namespace
PM: core: Add NS varients of EXPORT[_GPL]_SIMPLE_DEV_PM_OPS and runtime pm equiv
iio: chemical: scd30: Export dev_pm_ops instead of suspend() and resume()
* pm-sleep:
cpuidle: PSCI: Improve support for suspend-to-RAM for PSCI OSI mode
PM: runtime: Allow to call __pm_runtime_set_status() from atomic context
PM: hibernate: Don't mark comment as kernel-doc
x86/ACPI: Preserve ACPI-table override during hibernation
PM: hibernate: Fix some kernel-doc comments
PM: sleep: enable dynamic debug support within pm_pr_dbg()
PM: sleep: Narrow down -DDEBUG on kernel/power/ files
* powercap:
powercap: intel_rapl: remove redundant store to value after multiply
powercap: intel_rapl: add support for ALDERLAKE_N
powercap: RAPL: Add Power Limit4 support for RaptorLake
powercap: intel_rapl: add support for RaptorLake
|
|
If genpd has parsed the domain-idle-states from DT, it's reasonable to
believe that the parsed data should be correct for the HW in question.
Based upon this, it seem superfluous to let genpd measure the corresponding
power-on/off latencies for these states.
Therefore, let's improve the behaviour in genpd by avoiding the
measurements for the domain-idle-states that have been parsed from DT.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The measurements of the power-on|off latencies in genpd for a PM domain are
superfluous, unless the corresponding genpd has a governor assigned to it,
which would make use of the data.
Therefore, let's improve the behaviour in genpd by making the measurements
conditional, based upon if there's a governor assigned.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If a genpd doesn't have an associated governor assigned, several variables
in the struct generic_pm_domain becomes superfluous.
Rather than wasting memory in allocated genpds, let's move the variables
from the struct generic_pm_domain into a new separate struct. In this way,
we can instead dynamically decide when we need to allocate the
corresponding data for it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To improve the readability of the code, let's move the parts that deals
with allocation/freeing of data, into two separate functions.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In the genpd governor we walk the list of child-domains to take into
account their next_wakeup. If the child-domain itself, doesn't have a
governor assigned to it, we can end up using the next_wakeup value before
it has been properly initialized. To prevent a possible incorrect behaviour
in the governor, let's initialize next_wakeup to KTIME_MAX.
Fixes: c79aa080fb0f ("PM: domains: use device's next wakeup to determine domain idle state")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When an IRQ safe device is attached to a non-IRQ safe PM domain, genpd
needs to prevent the PM domain from being powered off. However, genpd still
allows the device to be runtime suspended/resumed, hence it's also
reasonable to think that a governor may be used to validate the QoS latency
constraints.
Unfortunately, genpd_runtime_resume() treats the configuration above, as a
reason to skip measuring the QoS resume latency for the device. This is a
legacy behaviour that was earlier correct, but should have been changed
when genpd was transformed into its current behaviour around how it manages
IRQ safe devices. Luckily, there's no report about problems, so let's just
fixup the behaviour.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The QoS latency measurements for devices in genpd_runtime_suspend|resume()
are superfluous, unless the corresponding genpd has a governor assigned to
it, which would make use of the data.
Therefore, let's improve the behaviour in genpd by making the measurements
conditional, based upon if there's a governor assigned.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If the corresponding genpd for the device doesn't use a governor, the
variable next_wakeup within the struct generic_pm_domain_data becomes
superfluous.
To avoid wasting memory, let's move it into the struct gpd_timing_data,
which is already being allocated based upon if there is governor assigned.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
If a genpd doesn't have an associated governor assigned, there's really no
point to allocate the per device gpd_timing_data, as the data isn't being
used by a governor anyway.
To avoid wasting memory, let's therefore convert the corresponding td
variable in the struct generic_pm_domain_data into a pointer and manage the
allocation of its data dynamically.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In irq_safe_dev_in_sleep_domain() we correctly skip the dev_warn_once() if
the corresponding genpd for the device, has the GENPD_FLAG_ALWAYS_ON flag
being set. For the same reason (the genpd is always-on in runtime), let's
also skip the warning if the GENPD_FLAG_RPM_ALWAYS_ON flag is set for the
genpd.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The name "irq_safe_dev_in_no_sleep_domain", doesn't really match the
conditions that are being checked in the function, hence the code becomes a
bit confusing to read.
Let's clarify this by renaming it into "irq_safe_dev_in_sleep_domain" and
let's also take the opportunity to clarify a corresponding comment in the
code.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Back in the days when genpd supported intermediate power states of its
devices, it made sense to check the PM_QOS_FLAG_NO_POWER_OFF in
genpd_power_off(). This because the attached devices were all being put
into low power state together when the PM domain was also being powered
off.
At this point, the flag PM_QOS_FLAG_NO_POWER_OFF is better checked by
drivers from their ->runtime_suspend() callbacks, like in the
usb_port_runtime_suspend(), for example. Or perhaps an even better option
is to set the QoS resume latency constraint for the device to zero, which
informs the runtime PM core to prevent the device from being runtime
suspended.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Due to recent changes, the always-on governor is always used with a genpd
that has the GENPD_FLAG_RPM_ALWAYS_ON flag being set. This means genpd,
doesn't invoke the governor's ->power_down_ok() callback, which makes the
code in the governor redundant, so let's drop it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Rather than relying on the genpd provider to set the corresponding flag,
GENPD_FLAG_RPM_ALWAYS_ON, when the always-on governor is being used, let's
add it in pm_genpd_init(). In this way, it starts to benefits all genpd
providers immediately.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
intel_pch_thermal driver needs a long delay to cool itself (60 seconds
in maximum) during suspend. When a wakeup event occures during the
delay, it is better for the intel_pch_thermal driver to detect this and
quit cooling because the suspend is likely to abort anyway.
Thus expose pm_wakeup_pending to modules so that intel_pch_thermal
driver can be aware of the wakeup events.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
To move towards a more consistent behaviour between genpd and the runtime
PM core, let's start by converting genpd's time-accounting from ktime_get()
into ktime_get_mono_fast_ns().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The only two users of __pm_runtime_set_status() are pm_runtime_set_active()
and pm_runtime_set_suspended(). These are widely used and should be called
from non-atomic context to work as expected. However, it would be
convenient to allow them be called from atomic context too, as shown from a
subsequent change, so let's add support for this.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Maulik Shah <quic_mkshah@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
A PM-runtime device usage count underflow is potentially critical,
because it may cause a device to be suspended when it is expected to
be operational. It is also a programming problem that would be good
to catch and warn about.
For this reason, (1) make rpm_check_suspend_allowed() return an error
when the device usage count is negative to prevent devices from being
suspended in that case, (2) introduce rpm_drop_usage_count() that will
detect device usage count underflows, warn about them and fix them up,
and (3) use it to drop the usage count in a few places instead of
atomic_dec_and_test().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Mention all domain attach menthods which dev_pm_domain_detach()
reverses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Merge changes related to system sleep, PM domains changes and power
management documentation changes for 5.18-rc1:
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by
default (David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
* pm-sleep:
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
PM: sleep: Add device name to suspend_report_result()
PM: suspend: fix return value of __setup handler
PM: hibernate: fix __setup handler error handling
PM: hibernate: Clean up non-kernel-doc comments
PM: sleep: wakeup: Fix typos in comments
PM: hibernate: fix load_image_and_restore() error path
* pm-domains:
PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove()
PM: domains: use dev_err_probe() to simplify error handling
PM: domains: Prevent power off for parent unless child is in deepest state
* pm-docs:
Documentation: admin-guide: pm: Document uncore frequency scaling
|
|
The function device_pm_check_callbacks() can be called under the spin
lock (in the reported case it happens from genpd_add_device() ->
dev_pm_domain_set(), when the genpd uses spinlocks rather than mutexes.
However this function uncoditionally uses spin_lock_irq() /
spin_unlock_irq(), thus not preserving the CPU flags. Use the
irqsave/irqrestore instead.
The backtrace for the reference:
[ 2.752010] ------------[ cut here ]------------
[ 2.756769] raw_local_irq_restore() called with IRQs enabled
[ 2.762596] WARNING: CPU: 4 PID: 1 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x34/0x50
[ 2.772338] Modules linked in:
[ 2.775487] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G S 5.17.0-rc6-00384-ge330d0d82eff-dirty #684
[ 2.781384] Freeing initrd memory: 46024K
[ 2.785839] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.785841] pc : warn_bogus_irq_restore+0x34/0x50
[ 2.785844] lr : warn_bogus_irq_restore+0x34/0x50
[ 2.785846] sp : ffff80000805b7d0
[ 2.785847] x29: ffff80000805b7d0 x28: 0000000000000000 x27: 0000000000000002
[ 2.785850] x26: ffffd40e80930b18 x25: ffff7ee2329192b8 x24: ffff7edfc9f60800
[ 2.785853] x23: ffffd40e80930b18 x22: ffffd40e80930d30 x21: ffff7edfc0dffa00
[ 2.785856] x20: ffff7edfc09e3768 x19: 0000000000000000 x18: ffffffffffffffff
[ 2.845775] x17: 6572206f74206465 x16: 6c696166203a3030 x15: ffff80008805b4f7
[ 2.853108] x14: 0000000000000000 x13: ffffd40e809550b0 x12: 00000000000003d8
[ 2.860441] x11: 0000000000000148 x10: ffffd40e809550b0 x9 : ffffd40e809550b0
[ 2.867774] x8 : 00000000ffffefff x7 : ffffd40e809ad0b0 x6 : ffffd40e809ad0b0
[ 2.875107] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000
[ 2.882440] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff7edfc03a8000
[ 2.889774] Call trace:
[ 2.892290] warn_bogus_irq_restore+0x34/0x50
[ 2.896770] _raw_spin_unlock_irqrestore+0x94/0xa0
[ 2.901690] genpd_unlock_spin+0x20/0x30
[ 2.905724] genpd_add_device+0x100/0x2d0
[ 2.909850] __genpd_dev_pm_attach+0xa8/0x23c
[ 2.914329] genpd_dev_pm_attach_by_id+0xc4/0x190
[ 2.919167] genpd_dev_pm_attach_by_name+0x3c/0xd0
[ 2.924086] dev_pm_domain_attach_by_name+0x24/0x30
[ 2.929102] psci_dt_attach_cpu+0x24/0x90
[ 2.933230] psci_cpuidle_probe+0x2d4/0x46c
[ 2.937534] platform_probe+0x68/0xe0
[ 2.941304] really_probe.part.0+0x9c/0x2fc
[ 2.945605] __driver_probe_device+0x98/0x144
[ 2.950085] driver_probe_device+0x44/0x15c
[ 2.954385] __device_attach_driver+0xb8/0x120
[ 2.958950] bus_for_each_drv+0x78/0xd0
[ 2.962896] __device_attach+0xd8/0x180
[ 2.966843] device_initial_probe+0x14/0x20
[ 2.971144] bus_probe_device+0x9c/0xa4
[ 2.975092] device_add+0x380/0x88c
[ 2.978679] platform_device_add+0x114/0x234
[ 2.983067] platform_device_register_full+0x100/0x190
[ 2.988344] psci_idle_init+0x6c/0xb0
[ 2.992113] do_one_initcall+0x74/0x3a0
[ 2.996060] kernel_init_freeable+0x2fc/0x384
[ 3.000543] kernel_init+0x28/0x130
[ 3.004132] ret_from_fork+0x10/0x20
[ 3.007817] irq event stamp: 319826
[ 3.011404] hardirqs last enabled at (319825): [<ffffd40e7eda0268>] __up_console_sem+0x78/0x84
[ 3.020332] hardirqs last disabled at (319826): [<ffffd40e7fd6d9d8>] el1_dbg+0x24/0x8c
[ 3.028458] softirqs last enabled at (318312): [<ffffd40e7ec90410>] _stext+0x410/0x588
[ 3.036678] softirqs last disabled at (318299): [<ffffd40e7ed1bf68>] __irq_exit_rcu+0x158/0x174
[ 3.045607] ---[ end trace 0000000000000000 ]---
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Currently, suspend_report_result() prints only function information.
If any driver uses a common PM function, nobody knows who exactly
called the failing function.
A device pinter is needed to recognize the failing device.
For example:
PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 0
PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns 0
become after the change:
serial 00:05: PM: dpm_run_callback(): pnp_bus_suspend+0x0/0x10 returns 0
pci 0000:00:01.3: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns 0
Signed-off-by: Youngjin Jang <yj84.jang@samsung.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The PM Runtime docs say:
Drivers in ->remove() callback should undo the runtime PM changes done
in ->probe(). Usually this means calling pm_runtime_disable(),
pm_runtime_dont_use_autosuspend() etc.
From grepping code, it's clear that many people aren't aware of the
need to call pm_runtime_dont_use_autosuspend().
When brainstorming solutions, one idea that came up was to leverage
the new-ish devm_pm_runtime_enable() function. The idea here is that:
* When the devm action is called we know that the driver is being
removed. It's the perfect time to undo the use_autosuspend.
* The code of pm_runtime_dont_use_autosuspend() already handles the
case of being called when autosuspend wasn't enabled.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Remove the second 'the'.
Replace the second 'of' with 'the'.
Replace 'couter' with 'counter'.
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When a genpd with GENPD_FLAG_IRQ_SAFE gets removed, the following
sleep-in-atomic bug will be seen, as genpd_debug_remove() will be called
with a spinlock being held.
[ 0.029183] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1460
[ 0.029204] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0
[ 0.029219] preempt_count: 1, expected: 0
[ 0.029230] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.17.0-rc4+ #489
[ 0.029245] Hardware name: Thundercomm TurboX CM2290 (DT)
[ 0.029256] Call trace:
[ 0.029265] dump_backtrace.part.0+0xbc/0xd0
[ 0.029285] show_stack+0x3c/0xa0
[ 0.029298] dump_stack_lvl+0x7c/0xa0
[ 0.029311] dump_stack+0x18/0x34
[ 0.029323] __might_resched+0x10c/0x13c
[ 0.029338] __might_sleep+0x4c/0x80
[ 0.029351] down_read+0x24/0xd0
[ 0.029363] lookup_one_len_unlocked+0x9c/0xcc
[ 0.029379] lookup_positive_unlocked+0x10/0x50
[ 0.029392] debugfs_lookup+0x68/0xac
[ 0.029406] genpd_remove.part.0+0x12c/0x1b4
[ 0.029419] of_genpd_remove_last+0xa8/0xd4
[ 0.029434] psci_cpuidle_domain_probe+0x174/0x53c
[ 0.029449] platform_probe+0x68/0xe0
[ 0.029462] really_probe+0x190/0x430
[ 0.029473] __driver_probe_device+0x90/0x18c
[ 0.029485] driver_probe_device+0x40/0xe0
[ 0.029497] __driver_attach+0xf4/0x1d0
[ 0.029508] bus_for_each_dev+0x70/0xd0
[ 0.029523] driver_attach+0x24/0x30
[ 0.029534] bus_add_driver+0x164/0x22c
[ 0.029545] driver_register+0x78/0x130
[ 0.029556] __platform_driver_register+0x28/0x34
[ 0.029569] psci_idle_init_domains+0x1c/0x28
[ 0.029583] do_one_initcall+0x50/0x1b0
[ 0.029595] kernel_init_freeable+0x214/0x280
[ 0.029609] kernel_init+0x2c/0x13c
[ 0.029622] ret_from_fork+0x10/0x20
It doesn't seem necessary to call genpd_debug_remove() with the lock, so
move it out from locking to fix the problem.
Fixes: 718072ceb211 ("PM: domains: create debugfs nodes when adding power domains")
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: 5.11+ <stable@vger.kernel.org> # 5.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
dev_err_probe() can reduce code size, makes the code easier to read
and has the added benefit of recording the defer reason for later
read out. Use it where appropriate.
This also fixes an issue, where an error message in __genpd_dev_pm_attach
was not terminated by a line break.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
A PM domain managed by genpd may support multiple idlestates (power-off
states). During genpd_power_off() a genpd governor may be asked to select
one of the idlestates based upon the dev PM QoS constraints, for example.
However, there is a problem with the behaviour around this in genpd. More
precisely, a parent-domain is allowed to be powered off, no matter of what
idlestate that has been selected for the child-domain.
For the stm32mp1 platform from STMicro, this behaviour doesn't play well.
Instead, the parent-domain must not be powered off, unless the deepest
idlestate has been selected for the child-domain. As the current behaviour
in genpd is quite questionable anyway, let's simply change it into what is
needed by the stm32mp1 platform.
If it surprisingly turns out that other platforms may need a different
behaviour from genpd, then we will have to revisit this to find a way to
make it configurable.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
After commit e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race
related to the EC GPE") wakeup interrupts occurring immediately after
the one discarded by acpi_s2idle_wake() may be missed. Moreover, if
the SCI triggers again immediately after the rearming in
acpi_s2idle_wake(), that wakeup may be missed too.
The problem is that pm_system_irq_wakeup() only calls pm_system_wakeup()
when pm_wakeup_irq is 0, but that's not the case any more after the
interrupt causing acpi_s2idle_wake() to run until pm_wakeup_irq is
cleared by the pm_wakeup_clear() call in s2idle_loop(). However,
there may be wakeup interrupts occurring in that time frame and if
that happens, they will be missed.
To address that issue first move the clearing of pm_wakeup_irq to
the point at which it is known that the interrupt causing
acpi_s2idle_wake() to tun will be discarded, before rearming the SCI
for wakeup. Moreover, because that only reduces the size of the
time window in which the issue may manifest itself, allow
pm_system_irq_wakeup() to register two second wakeup interrupts in
a row and, when discarding the first one, replace it with the second
one. [Of course, this assumes that only one wakeup interrupt can be
discarded in one go, but currently that is the case and I am not
aware of any plans to change that.]
Fixes: e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Pull RTC updates from Alexandre Belloni:
"Two new drivers this cycle and a significant rework of the CMOS driver
make the bulk of the changes.
I also carry powerpc changes with the agreement of Michael.
New drivers:
- Sunplus SP7021 RTC
- Nintendo GameCube, Wii and Wii U RTC
Driver updates:
- cmos: refactor UIP handling and presence check, fix century
- rs5c372: offset correction support, report low voltage
- rv8803: Epson RX8804 support"
* tag 'rtc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
rtc: sunplus: fix return value in sp_rtc_probe()
rtc: cmos: Evaluate century appropriate
rtc: gamecube: Fix an IS_ERR() vs NULL check
rtc: mc146818-lib: fix signedness bug in mc146818_get_time()
dt-bindings: rtc: qcom-pm8xxx-rtc: update register numbers
rtc: pxa: fix null pointer dereference
rtc: ftrtc010: Use platform_get_irq() to get the interrupt
rtc: Move variable into switch case statement
rtc: pcf2127: Fix typo in comment
dt-bindings: rtc: Add Sunplus RTC json-schema
rtc: Add driver for RTC in Sunplus SP7021
rtc: rs5c372: fix incorrect oscillation value on r2221tl
rtc: rs5c372: add offset correction support
rtc: cmos: avoid UIP when writing alarm time
rtc: cmos: avoid UIP when reading alarm time
rtc: mc146818-lib: refactor mc146818_does_rtc_work
rtc: mc146818-lib: refactor mc146818_get_time
rtc: mc146818-lib: extract mc146818_avoid_UIP
rtc: mc146818-lib: fix RTC presence check
rtc: Check return value from mc146818_get_time()
...
|
|
Notice that pm_runtime_put_suppliers() cannot be called with
disabled interrupts, because it may sleep (due to the device
links read locking in the non-SRCU case), and so it can use
spin_lock_irq() and spin_unlock_irq() for the locking.
Update the function accordingly and while at it move the "put"
local variable in it into the inner block where it is used.
This change is not expected to have any visible functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
|
|
Commit 2aa36604e824 ("PM: sleep: Avoid calling put_device() under
dpm_list_mtx") forgot to update the while () loop termination
condition to also break the loop if error is nonzero, which
causes the loop to become infinite if device_prepare() returns
an error for one device.
Add the missing !error check.
Fixes: 2aa36604e824 ("PM: sleep: Avoid calling put_device() under dpm_list_mtx")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
|
|
Because refcount_dec_not_one() returns true if the target refcount
becomes saturated, it is generally unsafe to use its return value as
a loop termination condition, but that is what happens when a device
link's supplier device is released during runtime PM suspend
operations and on device link removal.
To address this, introduce pm_runtime_release_supplier() to be used
in the above cases which will check the supplier device's runtime
PM usage counter in addition to the refcount_dec_not_one() return
value, so the loop can be terminated in case the rpm_active refcount
value becomes invalid, and update the code in question to use it as
appropriate.
This change is not expected to have any visible functional impact.
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
Sudeep Holla
Johan Hovold
Rafael J. Wysocki
Mario Limonciello
Saravana Kannan
Linus Torvalds
Hsin-Yi Wang
Ulf Hansson
Bjorn Helgaas
Zhang Rui
Krzysztof Kozlowski
Dmitry Baryshkov
Youngjin Jang
Douglas Anderson
Tom Rix
Shawn Guo
Ahmad Fatoum