aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-07-06Bluetooth: btusb: Add protocol support for MediaTek MT7663U USB devicesSean Wang1-0/+5
This adds the support of enabling MT7663U Bluetooth function running on the top of btusb driver. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0e8d ProdID=7663 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=160mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devicesSean Wang2-0/+587
This adds the support of enabling MT7668U Bluetooth function running on the top of btusb driver. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=0e8d ProdID=7668 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=160mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Add new 13d3:3491 QCA_ROME deviceJoão Paulo Rechi Vita1-0/+1
Without the QCA ROME setup routine this adapter fails to establish a SCO connection. T: Bus=01 Lev=01 Prnt=01 Port=08 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3491 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Add new 13d3:3501 QCA_ROME deviceJoão Paulo Rechi Vita1-0/+1
Without the QCA ROME setup routine this adapter fails to establish a SCO connection. T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3501 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#=0x1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_bcsp: Fix memory leak in rx_skbTomas Bortoli1-0/+5
Syzkaller found that it is possible to provoke a memory leak by never freeing rx_skb in struct bcsp_struct. Fix by freeing in bcsp_close() Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com> Reported-by: syzbot+98162c885993b72f19c4@syzkaller.appspotmail.com Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth:: btrtl: Add support for RTL8723DULarry Finger1-0/+8
This device is functionally equivalent to the BT part of the RTL8723DE, uses the same firmware, but the LMP subversion and HCI revision are unique. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btmtkuart: add an implementation for clock osc propertySean Wang1-3/+18
Some board requires explicitily control external osscilator via GPIO. So, add an implementation of a clock property for an external oscillator to the device. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btmtkuart: add an implementation for boot-gpios propertySean Wang1-9/+25
Not every platform has the pinctrl device integrates the GPIO the function such as MT7621 whose pinctrl and GPIO are separate hardware so the driver adds additional boot-gpios to let the MT766[3,8]U can enter the proper boot mode by gpiod for such platform. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btbcm: Add entry for BCM4359C0 UART bluetoothNeil Armstrong1-0/+1
The BCM4359C0 BT/Wi-Fi compo chip needs an entry to be discovered by the btbcm driver. Tested using an AP6398S module from Ampak. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_qca: Load customized NVM based on the device propertyRocky Liao3-5/+27
QCA BTSOC NVM is a customized firmware file and different vendors may want to have different BTSOC configuration (e.g. Configure SCO over PCM or I2S, Setting Tx power, etc.) via this file. This patch will allow vendors to download different NVM firmware file by reading a device property "firmware-name". Signed-off-by: Rocky Liao <rjliao@codeaurora.org> Tested-by: Harish Bandi <c-hbandi@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_mrvl: Add serdev supportSascha Hauer2-1/+69
This adds serdev support to the Marvell hci uart driver. Only basic serdev support, none of the fancier features like regulator or enable GPIO support is added for now. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_mrvl: Wait for final ack before switching baudrateSascha Hauer1-0/+3
For the Marvell HCI UART we have to upload two firmware files. The first one is only for switching the baudrate of the device to a higher baudrate. After the baudrate switching firmware has been uploaded the device waits for a final ack (0x5a) before actually switching the baudrate. To send this final ack with the old baudrate give the hci ldisc workqueue a chance to run before switching the baudrate. Without this the final ack will never be received by the device and firmware upload fails. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_ldisc: Add function to wait for characters to be sentSascha Hauer2-0/+9
The hci UART line discipline sends its characters in a workqueue. Some devices like the Marvell Bluetooth chips need to make sure that all queued characters are sent before switching the baudrate. This adds a function to synchronize with the workqueue. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_qca: wcn3990: Drop baudrate change vendor eventMatthias Kaehlcke1-1/+54
Firmware download to the WCN3990 often fails with a 'TLV response size mismatch' error: [ 133.064659] Bluetooth: hci0: setting up wcn3990 [ 133.489150] Bluetooth: hci0: QCA controller version 0x02140201 [ 133.495245] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv [ 133.507214] Bluetooth: hci0: QCA TLV response size mismatch [ 133.513265] Bluetooth: hci0: QCA Failed to download patch (-84) This is caused by a vendor event that corresponds to an earlier command to change the baudrate. The event is not processed in the context of the baudrate change and is later interpreted as response to the firmware download command (which is also a vendor command), but the driver detects that the event doesn't have the expected amount of associated data. More details: For the WCN3990 the vendor command for a baudrate change isn't sent as synchronous HCI command, because the controller sends the corresponding vendor event with the new baudrate. The event is received and decoded after the baudrate change of the host port. Identify the 'unused' event when it is received and don't add it to the queue of RX frames. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btqca: inject command complete event during fw downloadBalakrishna Godavarthi2-1/+42
Latest qualcomm chips are not sending an command complete event for every firmware packet sent to chip. They only respond with a vendor specific event for the last firmware packet. This optimization will decrease the BT ON time. Due to this we are seeing a timeout error message logs on the console during firmware download. Now we are injecting a command complete event once we receive an vendor specific event for the last RAM firmware packet. Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: Cleanup formatting and coding styleFabian Schindlatz2-8/+20
Fix some warnings and one error reported by checkpatch.pl: - lines longer than 80 characters are wrapped - empty lines inserted to separate variable declarations from the actual code - line break inserted after if (...) Co-developed-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Fabian Schindlatz <fabian.schindlatz@fau.de> Cc: linux-kernel@i4.cs.fau.de Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btrtl: HCI reset on close for Realtek BT chipJian-Hong Pan3-0/+27
Realtek RTL8822BE BT chip on ASUS X420FA cannot be turned on correctly after on-off several times. Bluetooth daemon sets BT mode failed when this issue happens. Scanning must be active while turning off for this bug to be hit. bluetoothd[1576]: Failed to set mode: Failed (0x03) If BT is turned off, then turned on again, it works correctly again. According to the vendor driver, the HCI_QUIRK_RESET_ON_CLOSE flag is set during probing. So, this patch makes Realtek's BT reset on close to fix this issue. Link: https://bugzilla.kernel.org/show_bug.cgi?id=203429 Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Reviewed-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_ll: Refactor download_firmwareFabian Schindlatz1-17/+28
Extract the new function send_command_from_firmware from download_firmware, which helps with the readability of the switch statement. This way the code is less deeply nested and also no longer exceeds the 80 character limit. Co-developed-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Thomas Röthenbacher <thomas.roethenbacher@fau.de> Signed-off-by: Fabian Schindlatz <fabian.schindlatz@fau.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: hci_ll: set operational frequency earlierPhilipp Puschmann1-18/+21
Uploading the firmware needs quite a few seconds if done at 115200 kbps. So set the operational frequency, usually 3 MHz, before uploading the firmware. I have successfully tested this with a wl1837mod. Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-07-06Bluetooth: btsdio: Do not bind to non-removable BCM4356Peter Robinson1-0/+1
BCM4356 devices soldered onto the PCB (non-removable) use an UART connection for bluetooth, such as the Rock960, but it also advertise btsdio support as a sdio function. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> CC: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 333Thomas Gleixner5-70/+5
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 136 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner4-43/+4
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner22-349/+22
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-05Bluetooth: hci_qca: Rename STATE_<flags> to QCA_<flags>Matthias Kaehlcke1-7/+8
Rename STATE_IN_BAND_SLEEP_ENABLED to QCA_IBS_ENABLED. The constant represents a flag (multiple flags can be set at once), not a unique state of the controller or driver. Also make the flag an enum value instead of a pre-processor constant (more flags will be added to the enum group by another patch). Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-05-05Bluetooth: btbcm: Add default address for BCM2076B1Stephan Gerhold1-0/+5
BCM2076B1 appears to use 20:76:A0:00:56:79 as default address. This address is used by at least 5 devices with the AMPAK AP6476 module and is also suspicious because it starts with the chip name 2076 (followed by a different revision A0 for some reason). Add it to the list of default addresses and leave it up to the user to configure a valid one. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-05-03Bluetooth: hci_qca: Added support for WCN3998Harish Bandi3-18/+40
Added new compatible for WCN3998 and corresponding voltage and current values to WCN3998 compatible. Changed driver code to support WCN3998 Signed-off-by: Harish Bandi <c-hbandi@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: hci_qca: Fix crash with non-serdev devicesMatthias Kaehlcke1-1/+2
qca_set_baudrate() calls serdev_device_wait_until_sent() assuming that the HCI is always associated with a serdev device. This isn't true for ROME controllers instantiated through ldisc, where the call causes a crash due to a NULL pointer dereferentiation. Only call the function when we have a serdev device. The timeout for ROME devices at the end of qca_set_baudrate() is long enough to be reasonably sure that the command was sent. Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990") Reported-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reported-by: Rocky Liao <rjliao@codeaurora.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Rocky Liao <rjliao@codeaurora.org> Tested-by: Rocky Liao <rjliao@codeaurora.org> Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: hci_qca: Give enough time to ROME controller to bootup.Balakrishna Godavarthi1-0/+2
This patch enables enough time to ROME controller to bootup after we bring the enable pin out of reset. Fixes: 05ba533c5c11 ("Bluetooth: hci_qca: Add serdev support"). Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Reviewed-by: Rocky Liao <rjliao@codeaurora.org> Tested-by: Rocky Liao <rjliao@codeaurora.org> Tested-by: Claire Chang <tientzu@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: hci_bcm: Fix empty regulator supplies for Intel MacsChen-Yu Tsai1-4/+16
The code path for Macs goes through bcm_apple_get_resources(), which skips over the code that sets up the regulator supplies. As a result, the call to regulator_bulk_enable() / regulator_bulk_disable() results in a NULL pointer dereference. This was reported on the kernel.org Bugzilla, bug 202963. Unbreak Broadcom Bluetooth support on Intel Macs by checking if the supplies were set up before enabling or disabling them. The same does not need to be done for the clocks, as the common clock framework API checks for NULL pointers. Fixes: 75d11676dccb ("Bluetooth: hci_bcm: Add support for regulator supplies") Cc: <stable@vger.kernel.org> # 5.0.x Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: btbcm: Add entry for BCM2076B1 UART BluetoothStephan Gerhold1-0/+1
Add the device ID for the BT/FM/GPS combo chip BCM2076 (rev B1) used in the AMPAK AP6476 WiFi/BT/FM/GPS module. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: btbcm: Add default address for BCM43341BFerry Toth1-1/+3
The BCM43341B has the default MAC address 43:34:1B:00:1F:AC if none is given. This address was found when enabling Bluetooth on multiple Intel Edison modules. It also contains the sequence 43341B, the name the chip identifies itself as. Using the same BD_ADDR is problematic when having multiple Intel Edison modules in each others range. The default address also has the LAA (locally administered address) bit set which prevents a BNEP device from being created, needed for BT tethering. Add this to the list of black listed default MAC addresses and let the user configure a valid one using f.i. `btmgmt -i hci0 public-addr xx:xx:xx:xx:xx:xx` Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: btmrvl: add support for SD8987 chipsetTamás Szűcs2-2/+38
This patch adds support for Marvell 88W8987 chipset with SDIO interface. Register offsets and supported feature flags are updated. The corresponding firmware image file shall be "mrvl/sd8987_uapsta.bin". Signed-off-by: Tamás Szűcs <tszucs@protonmail.ch> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: btmtksdio: Add runtime PM support to SDIO based BluetoothSean Wang1-0/+144
Add runtime PM support to btmtksdio. With this way, there will be the benefit of the device entering the more power saving state once it is been a while data traffic is idle. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: btmtksdio: Fix hdev->stat.byte_rx accumulationSean Wang1-2/+2
Accumulate hdev->stat.byte_rx only for valid packets as btmtkuart doing. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: btmtksdio: Add a bit definition for CHLPCRSean Wang1-3/+4
Add a register bit definition about CHLPCR bit 8 because the bit is quite different in the meaning between reading and writing that bit. The patch adds a definition particularly for the bit read to avoid the confusion about using write definition to read the bit. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: btmtksdio: Drop newline with bt_dev logging macrosSean Wang1-3/+3
bt_dev logging macros already include a newline at each output so drop these unnecessary additional newlines in the driver. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: hci_h5: fix spelling mistake "sliped" -> "slipped"Colin Ian King1-1/+1
There is a spelling mistake in a BT_DBG debug message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: mediatek: Fixed incorrect type in assignmentSean Wang1-1/+1
Fixed warning: incorrect type in assignment reported by kbuild test robot. The detailed warning is shown as below. make ARCH=x86_64 allmodconfig make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' All warnings (new ones prefixed by >>): btmtkuart.c:671:18: sparse: warning: incorrect type in assignment (different base types) btmtkuart.c:671:18: sparse: expected unsigned int [usertype] baudrate btmtkuart.c:671:18: sparse: got restricted __le32 [usertype] sparse warnings: (new ones prefixed by >>) btmtkuart.c:671:18: sparse: warning: incorrect type in assignment (different base types) btmtkuart.c:671:18: sparse: expected unsigned int [usertype] baudrate btmtkuart.c:671:18: sparse: got restricted __le32 [usertype] vim +671 drivers/bluetooth/btmtkuart.c 659 660 static int btmtkuart_change_baudrate(struct hci_dev *hdev) 661 { 662 struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); 663 struct btmtk_hci_wmt_params wmt_params; 664 u32 baudrate; 665 u8 param; 666 int err; 667 668 /* Indicate the device to enter the probe state the host is 669 * ready to change a new baudrate. 670 */ > 671 baudrate = cpu_to_le32(bdev->desired_speed); 672 wmt_params.op = MTK_WMT_HIF; Fixes: 22eaf6c9946a ("Bluetooth: mediatek: add support for MediaTek MT7663U and MT7668U UART devices") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: btmtksdio: fix uninitialized symbol errors in btmtksdio_rx_packetSean Wang1-10/+0
Fixed all the below warnings. They would probably cause the following error handling path would use the uninitialized value and then produce unexpected behavior. drivers/bluetooth/btmtksdio.c:470:2: warning: ‘old_len’ may be used uninitialized in this function [-Wmaybe-uninitialized] print_hex_dump(KERN_ERR, "err sdio rx: ", DUMP_PREFIX_NONE, 4, 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ old_data, old_len, true); ~~~~~~~~~~~~~~~~~~~~~~~~ drivers/bluetooth/btmtksdio.c:376:15: note: ‘old_len’ was declared here unsigned int old_len; ^~~~~~~ drivers/bluetooth/btmtksdio.c:470:2: warning: ‘old_data’ may be used uninitialized in this function [-Wmaybe-uninitialized] print_hex_dump(KERN_ERR, "err sdio rx: ", DUMP_PREFIX_NONE, 4, 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ old_data, old_len, true); ~~~~~~~~~~~~~~~~~~~~~~~~ drivers/bluetooth/btmtksdio.c:375:17: note: ‘old_data’ was declared here unsigned char *old_data; ^~~~~~~~ v2: Remove old_len and old_data because the error path for sdio_readsb also seems wrong. And change the prefix from "mediatek" to "btmtksdio". Fixes: d74eef2834b5 ("Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devices") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: btsdio: Use module_sdio_driver helperSean Wang1-14/+1
Macro module_sdio_driver is used for drivers whose init and exit paths only register and unregister to SDIO API. So remove boilerplate code to make code simpler by using module_sdio_driver. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: mediatek: Use module_sdio_driver helperSean Wang1-14/+1
Macro module_sdio_driver is used for drivers whose init and exit paths only register and unregister to SDIO API. So remove boilerplate code to make code simpler by using module_sdio_driver. Suggested-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: btqca: Fix misspelling of 'baudrate'Matthias Kaehlcke1-1/+1
Rename the misspelled struct 'qca_bardrate' to 'qca_baudrate' Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: hci_qca: Add helper function to get the chip familyMatthias Kaehlcke1-19/+26
Many functions obtain a 'struct qca_serdev' only to read the btsoc_type field. Add a helper function that encapsulates this. This also fixes crashes observed on platforms with ROME controllers that are instantiated through ldisc and not as serdev clients. The crashes are caused by NULL pointer dereferentiations, which stem from the driver's assumption that a QCA HCI device is always associated with a serdev device. Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990") Reported-by: Balakrishna Godavarthi <bgodavar@codeaurora.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-23Bluetooth: mediatek: add support for MediaTek MT7663S and MT7668S SDIO devicesSean Wang3-0/+991
This adds the support of enabling MT7663S and MT7668S SDIO-based Bluetooth function. There are quite many differences between MT766[3,8]S and standard Bluetooth SDIO devices such as Type-A and Type-B devices. For example, MT766[3,8]S have its own SDIO registers layout, definition, SDIO packet format, and the specific flow should be programmed on them to complete the device initialization and low power control and so on. Currently, there are many independent programming sequences from the transport which are exactly the same as the ones in btusb.c about MediaTek support [1] and btmtkuart.c. We can try to split the transport independent Bluetooth setups on the advance, place them into the common files and allow varous transport drivers to reuse them in the future. [1] http://lists.infradead.org/pipermail/linux-mediatek/2019-January/017074.html Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-04-09Bluetooth: btusb: request wake pin with NOAUTOENBrian Norris1-1/+1
Badly-designed systems might have (for example) active-high wake pins that default to high (e.g., because of external pull ups) until they have an active firmware which starts driving it low. This can cause an interrupt storm in the time between request_irq() and disable_irq(). We don't support shared interrupts here, so let's just pre-configure the interrupt to avoid auto-enabling it. Fixes: fd913ef7ce61 ("Bluetooth: btusb: Add out-of-band wakeup support") Fixes: 5364a0b4f4be ("arm64: dts: rockchip: move QCA6174A wakeup pin into its USB node") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-02Bluetooth: mediatek: add support for MediaTek MT7663U and MT7668U UART devicesSean Wang1-10/+271
This adds the support of enabling MT7663U and MT7668U Bluetooth function running on the top of btmtkuart driver. There are a few differences between MT766[3,8]U and MT7622 where MT766[3,8]U are standalone devices based on UART transport while MT7622 bluetooth is a built-in device on MediaTek SoC communicating with the host through BTIF serial transport. Thus, extra setup sequence is necessary for these standalone devices such as remote regulator and reset control via GPIO, baud rate changing handshake between the host and device and so on. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-03-02Bluetooth: hci_qca: Reduce delay after sending baudrate request for WCN3990Matthias Kaehlcke1-8/+18
The current 300ms delay after a baudrate change is extremely long. For WCN3990 it is sufficient to wait 10ms after the baudrate change request has been sent over the wire. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-27Bluetooth: btusb: add QCA6174A compatible propertiesBrian Norris1-0/+2
We may need to specify a GPIO wake pin for this device, so add a compatible property for it. There are at least to USB PID/VID variations of this chip: one with a Lite-On ID and one with an Atheros ID. Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-02-27Bluetooth: hci_qca: Use msleep() instead of open coding itMatthias Kaehlcke1-3/+1
Call msleep() in qca_set_baudrate() instead of reimplementing it. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.