aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk/at91/clk-main.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-10-26clk: at91: re-factor clocks suspend/resumeClaudiu Beznea1-0/+66
SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where most of the SoC's components are powered off (including PMC). Resuming from this mode is done with the help of bootloader. Peripherals are not aware of the power saving mode thus most of them are disabling clocks in proper suspend API and re-enable them in resume API without taking into account the previously setup rate. Moreover some of the peripherals are acting as wakeup sources and are not disabling the clocks in this scenario, when suspending. Since backup mode cuts the power for peripherals, in resume part these clocks needs to be re-configured. The initial PMC suspend/resume code was designed only for SAMA5D2's PMC (as it was the only one supporting backup mode). SAMA7G supports also backup mode and its PMC is different (few new functionalities, different registers offsets, different offsets in registers for each functionalities). To address both SAMA5D2 and SAMA7G5 PMC add .save_context()/.resume_context() support to each clocks driver and call this from PMC driver. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20211011112719.3951784-2-claudiu.beznea@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-13clk: at91: clk-main: update key before writing AT91_CKGR_MORClaudiu Beznea1-3/+8
SAMA5D2 datasheet specifies on chapter 33.22.8 (PMC Clock Generator Main Oscillator Register) that writing any value other than 0x37 on KEY field aborts the write operation. Use the key when selecting main clock parent. Fixes: 27cb1c2083373 ("clk: at91: rework main clk implementation") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1598338751-20607-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-24clk: at91: replace conditional operator with double logical notClaudiu Beznea1-3/+3
Replace conditional operator with double logical not as code may be simpler to read. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-10-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-10-28clk: at91: avoid sleeping earlyAlexandre Belloni1-1/+4
It is not allowed to sleep to early in the boot process and this may lead to kernel issues if the bootloader didn't prepare the slow clock and main clock. This results in the following error and dump stack on the AriettaG25: bad: scheduling from the idle thread! Ensure it is possible to sleep, else simply have a delay. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lkml.kernel.org/r/20190920153906.20887-1-alexandre.belloni@bootlin.com Fixes: 80eded6ce8bb ("clk: at91: add slow clks driver") Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-16clk: at91: select parent if main oscillator or bypass is enabledEugen Hristev1-3/+7
Selecting the right parent for the main clock is done using only main oscillator enabled bit. In case we have this oscillator bypassed by an external signal (no driving on the XOUT line), we still use external clock, but with BYPASS bit set. So, in this case we must select the same parent as before. Create a macro that will select the right parent considering both bits from the MOR register. Use this macro when looking for the right parent. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1568042692-11784-2-git-send-email-eugen.hristev@microchip.com Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-09-16clk: at91: fix update bit maps on CFG_MOR writeEugen Hristev1-1/+1
The regmap update bits call was not selecting the proper mask, considering the bits which was updating. Update the mask from call to also include OSCBYPASS. Removed MOSCEN which was not updated. Fixes: 1bdf02326b71 ("clk: at91: make use of syscon/regmap internally") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1568042692-11784-1-git-send-email-eugen.hristev@microchip.com Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-6/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-17clk: at91: move DT compatibility code to its own fileAlexandre Belloni1-104/+0
Move all the DT backward compatibility code to its own file so it can be deleted later. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-10-17clk: at91: allow clock registration from C codeAlexandre Belloni1-4/+4
Remove static keyword to allow functions to be used from other units. Also move some struct and function declarations to pmc.h Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Include pmc.h] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2016-09-14clk: at91: Migrate to clk_hw based registration and OF APIsStephen Boyd1-36/+52
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers in this driver, allowing us to move closer to a clear split of consumer and provider clk APIs. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-03-23Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds1-3/+3
Pull clk updates from Stephen Boyd: "The clk changes for this release cycle are mostly dominated by new device support in terms of LoC, but there has been some cleanup in the core as well as the usual minor clk additions to various drivers. Core: - parent tracking has been simplified - CLK_IS_ROOT is now a no-op flag, cleaning up drivers has started - of_clk_init() doesn't consider disabled DT nodes anymore - clk_unregister() had an error path bug squashed - of_clk_get_parent_count() has been fixed to only return unsigned ints - HAVE_MACH_CLKDEV is removed now that the last arch user (ARM) is gone New Drivers: - NXP LPC18xx creg - QCOM IPQ4019 GCC - TI dm814x ADPLL - i.MX6QP Updates: - Cyngus audio clks found on Broadcom iProc devices - Non-critical fixes for BCM2385 PLLs - Samsung exynos5433 updates for clk id errors, HDMI support, suspend/resume simplifications - USB, CAN, LVDS, and FCP clks on shmobile devices - sunxi got support for more clks on new SoCs and went through a minor refactoring/rewrite to use a simpler factor clk construct - rockchip added some more clk ids and added suport for fraction dividers - QCOM GDSCs in msm8996 - A new devm helper to make adding custom actions simpler (acked by Greg)" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (197 commits) clk: bcm2835: fix check of error code returned by devm_ioremap_resource() clk: renesas: div6: use RENESAS for #define clk: renesas: Rename header file renesas.h clk: max77{686,802}: Remove CLK_IS_ROOT clk: versatile: Remove CLK_IS_ROOT clk: sunxi: Remove use of variable length array clk: fixed-rate: Remove CLK_IS_ROOT clk: qcom: Remove CLK_IS_ROOT doc: dt: add documentation for lpc1850-creg-clk driver clk: add lpc18xx creg clk driver clk: lpc32xx: fix compilation warning clk: xgene: Add missing parenthesis when clearing divider value clk: mb86s7x: Remove CLK_IS_ROOT clk: x86: Remove clkdev.h and clk.h includes clk: x86: Remove CLK_IS_ROOT clk: mvebu: Remove CLK_IS_ROOT clk: renesas: move drivers to renesas directory clk: si5{14,351,70}: Remove CLK_IS_ROOT clk: scpi: Remove CLK_IS_ROOT clk: s2mps11: Remove CLK_IS_ROOT ...
2016-03-02clk: at91: Remove CLK_IS_ROOTStephen Boyd1-1/+1
This flag is a no-op now. Remove usage of the flag. Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-26clk: at91: Remove impossible checks for of_clk_get_parent_count()Stephen Boyd1-2/+2
These checks for < 0 are impossible now that of_clk_get_parent_count() returns an unsigned int. Change the checks for == 0 and update the type. Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-02-17clk: at91: remove IRQ handling and use pollingAlexandre Belloni1-123/+15
The AT91 clock drivers make use of IRQs to avoid polling when waiting for some clocks to be enabled. Unfortunately, this leads to a crash when those IRQs are threaded (which happens when using preempt-rt) because they are registered before thread creation is possible. Use polling on those clocks instead to avoid the problem. Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-17clk: at91: make use of syscon/regmap internallyBoris Brezillon1-89/+159
Use the regmap coming from syscon to access the registers instead of using pmc_read/pmc_write. This allows to avoid passing the at91_pmc structure to the child nodes of the PMC. The final benefit is to have each clock register itself instead of having to iterate over the children. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-07-28clk: at91: make use of of_clk_parent_fill helper functionDinh Nguyen1-6/+1
Use of_clk_parent_fill to fill in the parent clock names' array. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-02clk: at91: do not leak resourcesDavid Dueck1-1/+3
Do not leak memory and free irqs in case of an error. Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: David Dueck <davidcdueck@googlemail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-04clk: at91: Use of_clk_get_parent_count() instead of open codingGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-07-02clk: at91: main: warn when the main crystal frequency is not setAlexandre Belloni1-0/+1
When the main crystal frequency is not set, the main clock is approximated using the MAINF value in the CKGR_MCFR register. Warn the user in that case. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@overkiz.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-05-07clk: at91: rework main clk implementationBoris BREZILLON1-63/+514
AT91 main clk is a clk multiplexer and not a simple fixed rate clk as currently implemented. In some SoCs (sam9x5, sama5, sam9g45 families) this multiplexer can choose among 2 sources: an internal RC oscillator circuit and an oscillator using an external crystal. In other Socs (sam9260, rm9200 families) the multiplexer source is hardcoded to the external crystal oscillator. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC main clockBoris BREZILLON1-0/+187
This patch adds new at91 main oscillator clock implementation using common clk framework. If rate is not provided during clock registration it is calculated using the slow clock (main clk parent in this case) rate and MCFR register. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.