aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk/meson (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-07-17Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds10-23/+1074
Pull clk updates from Stephen Boyd: "This round of clk driver and framework updates is heavy on the driver update side. The two main highlights in the core framework are the addition of an bulk clk_get API that handles optional clks and an extra debugfs file that tells the developer about the current parent of a clk. The driver updates are dominated by i.MX in the diffstat, but that is mostly because that SoC has started converting to the clk_hw style of clk registration. The next big update is in the Amlogic meson clk driver that gained some support for audio, cpu, and temperature clks while fixing some PLL issues. Finally, the biggest thing that stands out is the conversion of a large part of the Allwinner sunxi-ng driver to the new clk parent scheme that uses less strings and more pointer comparisons to match clk parents and children up. In general, it looks like we have a lot of little fixes and tweaks here and there to clk data along with the normal addition of a handful of new drivers and a couple new core framework features. Core: - Add a 'clk_parent' file in clk debugfs - Add a clk_bulk_get_optional() API (with devm too) New Drivers: - Support gated clk controller on MIPS based BCM63XX SoCs - Support SiLabs Si5341 and Si5340 chips - Support for CPU clks on Raspberry Pi devices - Audsys clock driver for MediaTek MT8516 SoCs Updates: - Convert a large portion of the Allwinner sunxi-ng driver to new clk parent scheme - Small frequency support for SiLabs Si544 chips - Slow clk support for AT91 SAM9X60 SoCs - Remove dead code in various clk drivers (-Wunused) - Support for Marvell 98DX1135 SoCs - Get duty cycle of generic pwm clks - Improvement in mmc phase calculation and cleanup of some rate defintions - Switch i.MX6 and i.MX7 clock drivers to clk_hw based APIs - Add GPIO, SNVS and GIC clocks for i.MX8 drivers - Mark imx6sx/ul/ull/sll MMDC_P1_IPG and imx8mm DRAM_APB as critical clock - Correct imx7ulp nic1_bus_clk and imx8mm audio_pll2_clk clock setting - Add clks for new Exynos5422 Dynamic Memory Controller driver - Clock definition for Exynos4412 Mali - Add CMM (Color Management Module) clocks on Renesas R-Car H3, M3-N, E3, and D3 - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas RZ/G2M - Support for 32 bit clock IDs in TI's sci-clks for J721e SoCs - TI clock probing done from DT by default instead of firmware - Fix Amlogic Meson mpll fractional part and spread sprectrum issues - Add Amlogic meson8 audio clocks - Add Amlogic g12a temperature sensors clocks - Add Amlogic g12a and g12b cpu clocks - Add TPU (Timer Pulse Unit / PWM) clocks on Renesas R-Car H3, M3-W, and M3-N - Add CMM (Color Management Module) clocks on Renesas R-Car M3-W - Add Clock Domain support on Renesas RZ/N1" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (190 commits) clk: consoldiate the __clk_get_hw() declarations clk: sprd: Add check for return value of sprd_clk_regmap_init() clk: lochnagar: Update DT binding doc to include the primary SPDIF MCLK clk: Add Si5341/Si5340 driver dt-bindings: clock: Add silabs,si5341 clk: clk-si544: Implement small frequency change support clk: add BCM63XX gated clock controller driver devicetree: document the BCM63XX gated clock bindings clk: at91: sckc: use dedicated functions to unregister clock clk: at91: sckc: improve error path for sama5d4 sck registration clk: at91: sckc: remove unnecessary line clk: at91: sckc: improve error path for sam9x5 sck register clk: at91: sckc: add support to free slow clock osclillator clk: at91: sckc: add support to free slow rc oscillator clk: at91: sckc: add support to free slow oscillator clk: rockchip: export HDMIPHY clock on rk3228 clk: rockchip: add watchdog pclk on rk3328 clk: rockchip: add clock id for hdmi_phy special clock on rk3228 clk: rockchip: add clock id for watchdog pclk on rk3328 clk: at91: sckc: add support for SAM9X60 ...
2019-06-28Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds3-8/+8
Pull clk fixes from Stephen Boyd: "A handful of clk driver fixes and one core framework fix - Do a DT/firmware lookup in clk_core_get() even when the DT index is a nonsensical value - Fix some clk data typos in the Amlogic DT headers/code - Avoid returning junk in the TI clk driver when an invalid clk is looked for - Fix dividers for the emac clks on Stratix10 SoCs - Fix default HDA rates on Tegra210 to correct distorted audio" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: socfpga: stratix10: fix divider entry for the emac clocks clk: Do a DT parent lookup even when index < 0 clk: tegra210: Fix default rates for HDA clocks clk: ti: clkctrl: Fix returning uninitialized data clk: meson: meson8b: fix a typo in the VPU parent names array variable clk: meson: fix MPLL 50M binding id typo
2019-06-11clk: meson: g12a: mark fclk_div3 as criticalNeil Armstrong1-0/+10
On Amlogic Meson G12b platform, the fclk_div3 seems to be necessary for the system to operate correctly. Disabling it cause the entire system to freeze, including peripherals. Let's mark this clock as critical, fixing boot on G12b platforms. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-06-11clk: meson: g12a: Add support for G12B CPUB clocksNeil Armstrong2-1/+801
Update the Meson G12A Clock driver to support the Amlogic G12B SoC. G12B clock driver is very close, the main differences are : - the clock tree is duplicated for the both clusters, and the SYS_PLL are swapped between the clusters - G12B has additional clocks like for CSI an other components Here only the cpu clock tree is handled. Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-06-11clk: meson-g12a: add temperature sensor clocksGuillaume La Roque2-1/+33
Add the TS clocks used by two temperature sensors Reviewed-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com> Signed-off-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> [fixed commit description]
2019-06-11clk: meson: meson8b: add the cts_i958 clockMartin Blumenstingl2-1/+25
Add the cts_i958 clock to control the clock source of the spdif output block. It is used to select whether the clock source of the spdif output is cts_amclk (when data are taken from i2s buffer) or the cts_mclk_i958 (when data are taken from the spdif buffer). The setup for this clock is identical to GXBB, so this ports commit 7eaa44f6207fb6 ("clk: meson: gxbb: add cts_i958 clock") to the Meson8/Meson8b/Meson8m2 clock driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-06-11clk: meson: meson8b: add the cts_mclk_i958 clocksMartin Blumenstingl2-1/+69
Add the SPDIF master clock also referred as cts_mclk_i958. The setup for this clock is identical to GXBB, so this ports commit 3c277c247eabeb ("clk: meson: gxbb: add cts_mclk_i958") to the Meson8/Meson8b/Meson8m2 clock driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-06-11clk: meson: meson8b: add the cts_amclk clocksMartin Blumenstingl2-1/+69
Add the I2S master clock also referred as cts_amclk. The setup for this clock is identical to GXBB, so this ports commit 4087bd4b21702d ("clk: meson: gxbb: add cts_amclk") to the Meson8/Meson8b/Meson8m2 clock driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20clk: meson: g12a: add controller register initJerome Brunet1-1/+7
Add the MPLL common register initial setting Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-05-20clk: meson: eeclk: add init regsJerome Brunet2-0/+5
Like the PLL and MPLL, the controller may require some magic setting to be applied on startup. This is needed when the initial setting is not applied by the boot ROM. The controller need to do it when the setting applies to several clock, like all the MPLLs in the case of g12a. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-05-20clk: meson: g12a: add mpll register init sequencesJerome Brunet1-0/+24
Add the required init of each MPLL of the g12a. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-05-20clk: meson: mpll: add init callback and regsJerome Brunet2-11/+26
Until now (gx and axg), the mpll setting on boot (whatever the bootloader) was good enough to generate a clean fractional division. It is not the case on the g12a. While moving away from the vendor u-boot, it was noticed the fractional part of the divider was no longer applied. Like on the pll, some magic settings need to applied on the mpll register. This change adds the ability to do that on the mpll driver. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-05-20clk: meson: axg: spread spectrum is on mpll2Jerome Brunet1-5/+5
After testing, it appears that the SSEN bit controls the spread spectrum function on MPLL2, not MPLL0. Fixes: 78b4af312f91 ("clk: meson-axg: add clock controller drivers") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-05-20clk: meson: gxbb: no spread spectrum on mpll0Jerome Brunet1-5/+0
The documentation says there is an SSEN bit on mpll0 but, after testing it, no spread spectrum function appears to be enabled by this bit on any of the MPLLs. Let's remove it until we know more Fixes: 1f737ffa13ef ("clk: meson: mpll: fix mpll0 fractional part ignored") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-05-20clk: meson: mpll: properly handle spread spectrumJerome Brunet2-3/+7
The bit 'SSEN' available on some MPLL DSS outputs is not related to the fractional part of the divider but to the function called 'Spread Spectrum'. This function might be used to solve EM issues by adding a jitter on clock signal. This widens the signal spectrum and weakens the peaks in it. While spread spectrum might be useful for some application, it is problematic for others, such as audio. This patch introduce a new flag to the MPLL driver to enable (or not) the spread spectrum function. Fixes: 1f737ffa13ef ("clk: meson: mpll: fix mpll0 fractional part ignored") Tested-by: Martin Blumenstingl<martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-05-20clk: meson: meson8b: fix a typo in the VPU parent names array variableMartin Blumenstingl1-5/+5
The variable which holds the parent names for the VPU clocks has a typo in it. Fix this typo to make the variable naming in the driver consistent. No functional changes. Fixes: 41785ce562491d ("clk: meson: meson8b: add the VPU clock trees") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-05-20clk: meson: fix MPLL 50M binding id typoJerome Brunet2-3/+3
MPLL_5OM (the capital letter o) should indeed be MPLL_50M (the number) Fix this before it gets used. Fixes: 25db146aa726 ("dt-bindings: clk: meson: add g12a periph clock controller bindings") Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-05-07Merge branches 'clk-doc', 'clk-more-critical', 'clk-meson' and 'clk-basic-be' into clk-nextStephen Boyd9-516/+2171
- Remove clk_readl() and introduce BE versions of basic clk types * clk-doc: clk: Drop duplicate clk_register() documentation clk: Document and simplify clk_core_get_rate_nolock() clk: Remove 'flags' member of struct clk_fixed_rate clk: nxp: Drop 'flags' on fixed_rate clk macro clk: Document __clk_mux_determine_rate() clk: Document CLK_MUX_READ_ONLY mux flag clk: Document deprecated things clk: Collapse gpio clk kerneldoc * clk-more-critical: clk: highbank: Convert to CLK_IS_CRITICAL * clk-meson: (21 commits) clk: meson: axg-audio: add g12a support clk: meson: axg-audio: don't register inputs in the onecell data clk: meson: axg_audio: replace prefix axg by aud dt-bindings: clk: axg-audio: add g12a support clk: meson: meson8b: add the video decoder clock trees clk: meson: meson8b: add the VPU clock trees clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2 clk: meson: meson8b: use a separate clock table for Meson8m2 dt-bindings: clock: meson8b: export the video decoder clocks clk: meson-g12a: add video decoder clocks dt-bindings: clock: meson8b: export the VPU clock clk: meson-g12a: add PCIE PLL clocks dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCIN clk: meson-pll: add reduced specific clk_ops for G12A PCIe PLL dt-bindings: clock: meson8b: drop the "ABP" clock definition clk: meson: g12a: add cpu clocks dt-bindings: clk: g12a-clkc: add VDEC clock IDs dt-bindings: clock: axg-audio: unexpose controller inputs dt-bindings: clk: g12a-clkc: add PCIE PLL clock ID clk: g12a-aoclk: re-export CLKID_AO_SAR_ADC_SEL clock id ... * clk-basic-be: clk: core: replace clk_{readl,writel} with {readl,writel} clk: core: remove powerpc special handling powerpc/512x: mark clocks as big endian clk: mux: add explicit big endian support clk: multiplier: add explicit big endian support clk: gate: add explicit big endian support clk: fractional-divider: add explicit big endian support clk: divider: add explicit big endian support
2019-04-08clk: meson: axg-audio: add g12a supportMaxime Jourdan2-8/+239
The g12a audio clock controller is largely similar to the existing axg controller, with the addition of the spdif output B and TDM pad clocks. This commit extends the existing axg audio clock controller driver to work with multiple compatibles and add the g12a specific clocks Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190329160649.31603-5-jbrunet@baylibre.com
2019-04-08clk: meson: axg-audio: don't register inputs in the onecell dataJerome Brunet2-44/+6
Clock inputs should not be exported outside the controller. It is a hack to have a stable global clock name within the clock controller, even for clocks external to the controller. There is an ongoing effort to replace this hack with something better. The first step is to not register those clocks in the provider anymore, so we can completely remove them later on. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190329160649.31603-4-jbrunet@baylibre.com
2019-04-08clk: meson: axg_audio: replace prefix axg by audJerome Brunet1-482/+482
The audio clock controller is compatible with axg and g12a SoC family. Having each clock name prefixed with "axg_" looks weird on the g12a. This change replace the "axg_" by "aud_" in fron the clock names. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190329160649.31603-3-jbrunet@baylibre.com
2019-04-01clk: meson: meson8b: add the video decoder clock treesMartin Blumenstingl2-1/+328
This adds the four video decoder clock trees. VDEC_1 is split into two paths on Meson8b and Meson8m2: - input mux called "vdec_1_sel" - two dividers ("vdec_1_1_div" and "vdec_1_2_div") and gates ("vdec_1_1" and "vdec_1_2") - and an output mux (probably glitch-free) called "vdec_1" On Meson8 the VDEC_1 tree is simpler because there's only one path: - input mux called "vdec_1_sel" - divider ("vdec_1_1_div") and gate ("vdec_1_1") - (the gate is used as output directly, there's no mux) The VDEC_HCODEC and VDEC_2 clocks are simple composite clocks each consisting of an input mux, divider and a gate. The VDEC_HEVC clock seems to have two paths similar to the VDEC_1 clock. However, the register offsets of the second clock path is not known. Amlogic's 3.10 kernel (which is used as reference) sets HHI_VDEC2_CLK_CNTL[31] to 1 before changing the VDEC_HEVC clock and back to 0 afterwards. For now, leave a TODO comment and only add the first path. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190324151423.19063-3-martin.blumenstingl@googlemail.com
2019-04-01clk: meson: meson8b: add the VPU clock treesMartin Blumenstingl2-1/+175
The VPU clock tree is slightly different on all three supported SoCs: Meson8 only has an input mux (which chooses between "fclk_div4", "fclk_div3", "fclk_div5" and "fclk_div7"), a divider and a gate. Meson8b has two VPU clock trees, each with an input mux (using the same parents as the input mux on Meson8), divider and a gates. The final VPU clock is a glitch-free mux which chooses between VPU_1 and VPU_2. Meson8m2 uses a similar clock tree as Meson8b but the last input clock is different: instead of using "fclk_div7" as input Meson8m2 uses "gp_pll". This was probably done in hardware to improve the accuracy of the clock because fclk_div7 gives us 2550MHz / 7 = 364.286MHz while GP_PLL can achieve 364.0MHz. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190324151104.18397-5-martin.blumenstingl@googlemail.com
2019-04-01clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2Martin Blumenstingl2-1/+66
Meson8m2 has a GP_PLL clock (similar to GP0_PLL on GXBB/GXL/GXM) which is used as input for the VPU clocks. The only supported frequency (based on Amlogic's vendor kernel sources) is 364MHz which is achieved using the following parameters: - input: XTAL (24MHz) - M = 182 - N = 3 - OD = 2 ^ 2 Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190324151104.18397-4-martin.blumenstingl@googlemail.com
2019-04-01clk: meson: meson8b: use a separate clock table for Meson8m2Martin Blumenstingl1-1/+192
Meson8, Meson8b and Meson8m2 implement a similar clock controller. However, there are a few differences between the three actual IP blocks. One example where Meson8m2 differs from Meson8b is the VPU clock setup: - the VPU input mux can choose between "fclk_div4", "fclk_div3", "fclk_div5" and "fclk_div7" on Meson8b - however, on Meson8m2 it can choose between "fclk_div4", "fclk_div3", "fclk_div5" and "gp_pll" (GP_PLL only exists on Meson8m2, it's the predecessor of the GP0_PLL clock on GXBB/GXL/GXM)) Add a separate clk_hw_onecell_data table for Meson8m2 so these differences can be implemented in our clock controller driver. For now meson8m2_hw_onecell_data is a clone of our existing meson8b_hw_onecell_data. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190324151104.18397-3-martin.blumenstingl@googlemail.com
2019-04-01clk: meson-g12a: add video decoder clocksMaxime Jourdan2-1/+170
Add the necessary clock parts for: - VDEC_1: used to feed VDEC_1 - VDEC_HEVC: the "back" part of the VDEC_HEVC block - VDEC_HEVCF: the "front" part of the VDEC_HEVC block In previous SoC generations (GXL, GXBB), there was only one VDEC_HEVC clock, which got split in two parts for G12A. Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190319101138.27520-2-mjourdan@baylibre.com
2019-04-01clk: meson-g12a: add PCIE PLL clocksNeil Armstrong2-1/+122
Add the PCIe reference clock feeding the USB3 + PCIE combo PHY. This PLL needs a very precise register sequence to permit to be locked, thus using the specific clk-pll pcie ops. The PLL is then followed by : - a fixed /2 divider - a 5-bit 1-based divider - a final /2 divider This reference clock is fixed to 100MHz, thus only a single PLL setup is added. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190307141455.23879-4-narmstrong@baylibre.com
2019-04-01clk: meson-pll: add reduced specific clk_ops for G12A PCIe PLLNeil Armstrong2-0/+27
The Meson G12A PCIE PLL is fined tuned to deliver a very precise 100MHz reference clock for the PCIe Analog PHY, and thus requires a strict register sequence to enable the PLL. To simplify, use the _init() op to enable the PLL and keep the other ops except set_rate since the rate is fixed. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190307141455.23879-2-narmstrong@baylibre.com
2019-04-01clk: meson: g12a: add cpu clocksNeil Armstrong2-1/+371
Add the Amlogic G12A Family CPU Clock tree in read/only for now. The CPU clock can either use the SYS_PLL for > 1GHz frequencies or use a couple of div+mux from 1GHz/667MHz/24MHz source with 2 non-glitch muxes. Proper DVFS support will come in a second time. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> [narmstrong: fixed cpu clocks namings] Link: https://lkml.kernel.org/r/20190304131129.7762-3-narmstrong@baylibre.com
2019-04-01dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCINNeil Armstrong1-1/+0
When submitted v2 of the G12A AO-CLK IDs, the CLKID_AO_CTS_OSCIN was moved to the internal non-exported bindings, but this clock is necessary for the second AO-CEC-B module since it embeds the 32768Hz dual-divider clock generator unlike the AO-CEC-A module. Export it back to the public bindings. Fixes: be3d960b0aeb ("dt-bindings: clk: add G12A AO Clock and Reset Bindings") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lkml.kernel.org/r/20190321092010.14382-1-narmstrong@baylibre.com
2019-04-01dt-bindings: clock: axg-audio: unexpose controller inputsJerome Brunet1-0/+20
Remove the bindings ID of the clock input of the controller. These clocks are purely internal to the controller, exposing them was a mistake. Actually, these should not even be in the provider and have IDs to begin with. Unexpose these IDs before: * someone starts using them (even if there no valid reason to do so) * the actual clocks are removed. The fact that they exist is just the result of an ugly hack. This will be resolved in CCF when we can reference DT directly in parent table. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Maxime Jourdan <mjourdan@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190213095835.17448-1-jbrunet@baylibre.com
2019-03-29clk: meson: vid-pll-div: remove warning and return 0 on invalid configNeil Armstrong1-2/+2
The vid_pll_div is a programmable fractional divider, but vendor gives a limited of known configuration value and it's corresponding fraction. Thus when at reset value (0) or unknown value, we cannot determine the result rate. The initial behaviour was to print a warning, but the warning triggers at each boot and when the clock tree is refreshed. This patch moves the print to debug and returns 0 instead of the parent rate. Fixes: 72dbb8c94d0d ("clk: meson: Add vid_pll divider driver") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190327151348.27402-1-narmstrong@baylibre.com
2019-03-25clk: meson: pll: fix rounding and setting a rate that matches preciselyMartin Blumenstingl1-1/+1
Make meson_clk_pll_is_better() consider a rate that precisely matches the requested rate to be better than any previous rate (which was smaller than the current). Prior to commit 8eed1db1adec6a ("clk: meson: pll: update driver for the g12a") meson_clk_get_pll_settings() returned early (before calling meson_clk_pll_is_better()) if the rate from the current iteration matches the requested rate precisely. After this commit meson_clk_pll_is_better() is called unconditionally. This requires meson_clk_pll_is_better() to work with the case where "now == rate". This fixes a hang during boot on Meson8b / Odroid-C1 for me. Fixes: 8eed1db1adec6a ("clk: meson: pll: update driver for the g12a") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190324164327.22590-2-martin.blumenstingl@googlemail.com
2019-03-19clk: g12a-aoclk: re-export CLKID_AO_SAR_ADC_SEL clock idNeil Armstrong1-1/+0
When submitted v2 of the G12A AO-CLK IDs, the SAR_ADC_SEL ID was moved to the internal non-exported bindings, but this clock is necessary and mandatory for the SAR ADC bindings. Export it back to the public bindings. Fixes: be3d960b0aeb ("dt-bindings: clk: add G12A AO Clock and Reset Bindings") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190304105358.4987-1-narmstrong@baylibre.com
2019-03-19clk: meson-g12a: fix VPU clock parentsNeil Armstrong1-1/+1
First two VPU clock parents are wrong, fix it here. Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190313135503.3198-1-narmstrong@baylibre.com
2019-03-19clk: meson: g12a: fix VPU clock muxes maskMaxime Jourdan1-2/+2
There are 8 parents, use 0x7 Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller") Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190319082611.6215-1-mjourdan@baylibre.com
2019-03-19clk: meson-gxbb: round the vdec dividers to closestMaxime Jourdan1-0/+2
We want the video decoder clocks to always round to closest. While the muxes are already using CLK_MUX_ROUND_CLOSEST, the corresponding CLK_DIVIDER_ROUND_CLOSEST was forgotten for the dividers. Fix this by adding the flag to the two vdec dividers. Fixes: a565242eb9fc ("clk: meson: gxbb: add the video decoder clocks") Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190319102537.2043-1-mjourdan@baylibre.com
2019-02-13clk: meson: meson8b: fix the naming of the APB clocksMartin Blumenstingl2-14/+14
Fix a typo in the APB clock names by renaming them from "abp" to "apb". No functional changes. Fixes: a7d19b05ce817d ("clk: meson: meson8b: add the CPU clock post divider clocks") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190210222603.6404-2-martin.blumenstingl@googlemail.com
2019-02-13clk: meson: Add G12A AO Clock + Reset ControllerNeil Armstrong4-1/+491
Add the Amlogic G12A AO Clock and Reset controller driver handling generation of Always-On clocks : - AO Clocks and Reset for Always-On modules - 32K Generation for USB and CEC - SAR ADC controller clock Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lkml.kernel.org/r/20190212162859.20743-3-narmstrong@baylibre.com
2019-02-04clk: meson: factorise meson64 peripheral clock controller driversJerome Brunet7-176/+313
The function used to probe the peripheral clock controller of the arm64 amlogic SoCs is mostly the same. We now have 3 of those controllers so it is time to factorize things a bit. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201145345.6795-5-jbrunet@baylibre.com
2019-02-04clk: meson: g12a: add peripheral clock controllerJian Hu5-2/+2594
Add the peripheral clock controller found in the g12a SoC family Signed-off-by: Jian Hu <jian.hu@amlogic.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201145345.6795-4-jbrunet@baylibre.com
2019-02-04clk: meson: pll: update driver for the g12aJerome Brunet2-59/+154
The g12a use fractional parameter of 17 useful bits. At the moment, this parameter in encoded using u16 value. Use this opportunity to switch all the pll to parameter to unsigned int. This should save us some annoying trouble shooting when and m and n field eventually grow as well. This patch also introduce pll multiplier range. On the g12a, the hifi and gp0 plls are able to lock as long as the following condition is met: 55 <= m/n <= 255. The param table describing this would be huge which is a waste of memory. Using ranges, we can save memory. Ranges also help find the best pll parameter significantly faster since we don't have to try all the possible settings. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [jbrunet: fixed fix pll settings calculation with arm32] Link: https://lkml.kernel.org/r/20190201145345.6795-2-jbrunet@baylibre.com
2019-02-02clk: meson: rework and clean drivers dependenciesJerome Brunet29-281/+465
Initially, the meson clock directory only hosted 2 controllers drivers, for meson8 and gxbb. At the time, both used the same set of clock drivers so managing the dependencies was not a big concern. Since this ancient time, entropy did its job, controllers with different requirement and specific clock drivers have been added. Unfortunately, we did not do a great job at managing the dependencies between the controllers and the different clock drivers. Some drivers, such as clk-phase or vid-pll-div, are compiled even if they are useless on the target (meson8). As we are adding new controllers, we need to be able to pick a driver w/o pulling the whole thing. The patch aims to clean things up by: * providing a dedicated CONFIG_ for each clock drivers * allowing clock drivers to be compiled as a modules, if possible * stating explicitly which drivers are required by each controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-02clk: meson: axg-audio does not require sysconJerome Brunet1-1/+1
The axg audio clock controller uses regmap mmio, not syscon. Fixes: 1cd50181750f ("clk: meson: axg: add the audio clock controller driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-4-jbrunet@baylibre.com
2019-01-18clk: meson: ao-clkc: claim clock controller input clocks from DTJerome Brunet4-14/+82
Instead of relying on a fixed names for the differents input clocks of the controller, get them through DT. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190116175435.4990-4-jbrunet@baylibre.com
2019-01-18clk: meson: axg: claim clock controller input clock from DTJerome Brunet1-8/+19
Instead of relying on a fixed name for the xtal clock, claim the controller input clock trough DT. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190116175435.4990-3-jbrunet@baylibre.com
2019-01-18clk: meson: gxbb: claim clock controller input clock from DTJerome Brunet1-13/+24
Instead of relying on a fixed name for the xtal clock, claim the controller input clock trough DT. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190116175435.4990-2-jbrunet@baylibre.com
2019-01-07clk: meson: meson8b: add the GPU clock treeMartin Blumenstingl2-1/+154
Add the GPU clock tree on Meson8, Meson8b and Meson8m2. The GPU clock tree on Meson8b and Meson8m2 is almost identical to the one one GXBB: - there's a glitch-free mux at HHI_MALI_CLK_CNTL[31] - there are two identical parents for this mux: mali_0 and mali_1, each with a gate, divider and mux - the parents of mali_0_sel and mali_1_sel are identical to GXBB except there's no GP0_PLL on these 32-bit SoCs Meson8 is different because it does not have the glitch-free mux. Instead if only has the mali_0 clock tree. The parents of mali_0_sel are identical to the ones on Meson8b and Meson8m2. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181208171247.22238-4-martin.blumenstingl@googlemail.com
2019-01-07clk: meson: meson8b: use a separate clock table for Meson8Martin Blumenstingl1-6/+197
The Meson8 SoC is slightly different compared to Meson8b and Meson8m2 because it does not have the glitch-free Mali GPU clock mux. For Meson8b and Meson8m2 there are currently no known differences. Add a separate clk_hw_onecell_data table for Meson8 so these differences can be implemented. For now meson8_hw_onecell_data is a clone of our existing meson8b_hw_onecell_data. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20181208171247.22238-3-martin.blumenstingl@googlemail.com
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.