aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk/qcom (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-08-25clk: qcom: Fix MSM8916 prng clock enable bitGeorgi Djakov1-1/+1
Fix the enable bit of the pseudorandom number generator clock. Reported-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Fixes: 3966fab8b6ab "clk: qcom: Add MSM8916 Global Clock Controller support" Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24clk: Convert __clk_get_name(hw->clk) to clk_hw_get_name(hw)Stephen Boyd1-1/+1
Use the provider based method to get a clock's name so that we can get rid of the clk member in struct clk_hw one day. Mostly converted with the following coccinelle script. @@ struct clk_hw *E; @@ -__clk_get_name(E->clk) +clk_hw_get_name(E) Acked-by: Heiko Stuebner <heiko@sntech.de> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Prashant Gaikwad <pgaikwad@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Bresticker <abrestic@chromium.org> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kevin Cernekee <cernekee@chromium.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-omap@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24clk: qcom: Convert to clk_hw based provider APIsStephen Boyd4-36/+30
We're removing struct clk from the clk provider API, so switch this code to using the clk_hw based provider APIs. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24clk: Convert __clk_get_flags() to clk_hw_get_flags()Stephen Boyd2-2/+2
Mostly converted with the following snippet: @@ struct clk_hw *E; @@ -__clk_get_flags(E->clk) +clk_hw_get_flags(E) Acked-by: Tero Kristo <t-kristo@ti.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-08-24clk: Replace __clk_get_num_parents with clk_hw_get_num_parents()Stephen Boyd4-5/+5
Mostly converted with the following semantic patch: @@ struct clk_hw *E; @@ -__clk_get_num_parents(E->clk) +clk_hw_get_num_parents(E) Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Chao Xie <chao.xie@marvell.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: "Emilio López" <emilio@elopez.com.ar> Acked-by: Tero Kristo <t-kristo@ti.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28clk: qcom: Give clk-qcom.ko module a GPLv2 licenseStephen Boyd1-0/+3
The missing license causes the clk-qcom.ko module to taint the kernel. Add the appropriate license to avoid taint. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28Merge branch 'cleanup-clk-h-includes' into clk-nextStephen Boyd1-0/+1
* cleanup-clk-h-includes: (62 commits) clk: Remove clk.h from clk-provider.h clk: h8300: Remove clk.h and clkdev.h includes clk: at91: Include clk.h and slab.h clk: ti: Switch clk-provider.h include to clk.h clk: pistachio: Include clk.h clk: ingenic: Include clk.h clk: si570: Include clk.h clk: moxart: Include clk.h clk: cdce925: Include clk.h clk: Include clk.h in clk.c clk: zynq: Include clk.h clk: ti: Include clk.h clk: sunxi: Include clk.h and remove unused clkdev.h includes clk: st: Include clk.h clk: qcom: Include clk.h clk: highbank: Include clk.h clk: bcm: Include clk.h clk: versatile: Remove clk.h and clkdev.h includes clk: ux500: Remove clk.h and clkdev.h includes clk: tegra: Properly include clk.h ...
2015-07-28clk: qcom: Set CLK_SET_RATE_PARENT on ce1 clocksStephen Boyd2-0/+2
The other ce clocks have the flag set, but ce1 doesn't, so clk_set_rate() doesn't propagate up the tree to the ce1_src_clk. Set the flag as this is supported. Reported-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Tested-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Fixes: 02824653200b ("clk: qcom: Add APQ8084 Global Clock Controller support") Fixes: d33faa9ead8d ("clk: qcom: Add support for MSM8974's global clock controller (GCC)") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-28Merge branch 'clk-determine-rate-struct' into clk-nextStephen Boyd3-70/+70
* clk-determine-rate-struct: clk: fix some determine_rate implementations clk: change clk_ops' ->determine_rate() prototype
2015-07-27clk: change clk_ops' ->determine_rate() prototypeBoris Brezillon3-70/+70
Clock rates are stored in an unsigned long field, but ->determine_rate() (which returns a rounded rate from a requested one) returns a long value (errors are reported using negative error codes), which can lead to long overflow if the clock rate exceed 2Ghz. Change ->determine_rate() prototype to return 0 or an error code, and pass a pointer to a clk_rate_request structure containing the expected target rate and the rate constraints imposed by clk users. The clk_rate_request structure might be extended in the future to contain other kind of constraints like the rounding policy, the maximum clock inaccuracy or other things that are not yet supported by the CCF (power consumption constraints ?). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> CC: Jonathan Corbet <corbet@lwn.net> CC: Tony Lindgren <tony@atomide.com> CC: Ralf Baechle <ralf@linux-mips.org> CC: "Emilio López" <emilio@elopez.com.ar> CC: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Tero Kristo <t-kristo@ti.com> CC: Peter De Schrijver <pdeschrijver@nvidia.com> CC: Prashant Gaikwad <pgaikwad@nvidia.com> CC: Stephen Warren <swarren@wwwdotorg.org> CC: Thierry Reding <thierry.reding@gmail.com> CC: Alexandre Courbot <gnurou@gmail.com> CC: linux-doc@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-omap@vger.kernel.org CC: linux-mips@linux-mips.org CC: linux-tegra@vger.kernel.org [sboyd@codeaurora.org: Fix parent dereference problem in __clk_determine_rate()] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> [sboyd@codeaurora.org: Folded in fix from Heiko for fixed-rate clocks without parents or a rate determining op] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-20clk: qcom: Include clk.hStephen Boyd1-0/+1
This clock provider uses the consumer API, so include clk.h explicitly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-07clk: qcom: Add support for SR2 PLLsGeorgi Djakov2-0/+76
Add support for SR2 type pll operations. SR2 is optimized for Time Interval Error (TIE) or absolute jitter. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06clk: qcom: Constify the parent names arraysGeorgi Djakov11-67/+67
Make const both the array and the strings, so they can be moved to .rodata section. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-07-06Merge branch 'clk-fixes' into clk-nextStephen Boyd1-6/+3
* clk-fixes: clk: mediatek: mt8173: Fix enabling of critical clocks drivers: clk: st: Fix mux bit-setting for Cortex A9 clocks drivers: clk: st: Add CLK_GET_RATE_NOCACHE flag to clocks drivers: clk: st: Fix flexgen lock init drivers: clk: st: Fix FSYN channel values drivers: clk: st: Remove unused code clk: qcom: Use parent rate when set rate to pixel RCG clock clk: at91: do not leak resources clk: stm32: Fix out-by-one error path in the index lookup clk: iproc: fix bit manipulation arithmetic clk: iproc: fix memory leak from clock name
2015-07-06clk: qcom: Use parent rate when set rate to pixel RCG clockHai Li1-6/+3
Since the parent rate has been recalculated, pixel RCG clock should rely on it to find the correct M/N values during set_rate, instead of calling __clk_round_rate() to its parent again. Signed-off-by: Hai Li <hali@codeaurora.org> Tested-by: Archit Taneja <architt@codeaurora.org> Fixes: 99cbd064b059 ("clk: qcom: Support display RCG clocks") [sboyd@codeaurora.org: Silenced unused parent variable warning] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-05-30clk: qcom: Add support for NSS/GMAC clocks and resetsStephen Boyd1-1/+593
Add the NSS/GMAC clocks and the TCM clock and NSS resets. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-30clk: qcom: Fix MSM8916 gfx3d_clk_src configurationGeorgi Djakov1-1/+1
The gfx3d_clk_src parents configuration is incorrect. Fix it. Fixes: 3966fab8b6ab "clk: qcom: Add MSM8916 Global Clock Controller support" Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-30clk: qcom: Fix MSM8916 venus divider valueGeorgi Djakov1-1/+1
One of the video codec clock frequencies has incorrect divider value. Fix it. Fixes: 3966fab8b6ab "clk: qcom: Add MSM8916 Global Clock Controller support" Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-08clk: qcom: Fix parent_map translationsGeorgi Djakov2-11/+35
When we introduced the parent_map tables, we missed to update some of the functions where mapping is translated. Fix this. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Tested-by: Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-07clk: qcom: fix driver dependenciesBartlomiej Zolnierkiewicz1-0/+1
Support for Qualcomm's clock controllers should be available only on Qualcomm platforms. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-04-06clk: qcom: Add EBI2 clocks for IPQ806xArchit Taneja1-0/+32
The NAND controller within EBI2 requires EBI2_CLK and EBI2_ALWAYS_ON_CLK clocks. Create structs for these clocks so that they can be used by the NAND controller driver. Add an entry for EBI2_AON_CLK in the gcc-ipq806x DT binding document. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-26clk: qcom: fix simple_return.cocci warningsFengguang Wu1-5/+1
drivers/clk/qcom/clk-pll.c:74:1-4: WARNING: end returns can be simpified Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-26clk: qcom: Fix ipq806x LCC frequency tablesStephen Boyd1-9/+9
These frequency tables list the wrong rates. Either they don't have the correct frequency at all, or they're specified in kHz instead of Hz. Fix it. Fixes: c99e515a92e9 "clk: qcom: Add IPQ806X LPASS clock controller (LCC) driver" Tested-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-23clk: qcom: Add MSM8916 Global Clock Controller supportGeorgi Djakov3-0/+2877
This patch adds support for the global clock controller found on the MSM8916 based devices. It allows the various device drivers to probe and control their clocks and resets. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> [sboyd@codeaurora.org: Removed NULL entry from parent_maps] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-23clk: qcom: Introduce parent_map tablesGeorgi Djakov15-286/+338
In the current parent mapping code, we can get duplicate or inconsistent indexes, which leads to discrepancy between the number of elements in the array and the number of parents. Until now, this was solved with some reordering but this is not always possible. This patch introduces index tables that are used to define the relations between the PLL source and the hardware mux configuration value. To accomplish this, here we do the following: - Define a parent_map struct to map the relations between PLL source index and register configuration value. - Add a qcom_find_src_index() function for finding the index of a clock matching the specific PLL configuration. - Update the {set,get}_parent RCG functions use the newly introduced parent_map struct. - Convert all existing drivers to the new parent_map tables. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-23clk: qcom: Do some error handling in configure_bank()Georgi Djakov1-21/+42
Currently configure_bank() returns void. Add some error checking on the regmap calls and propagate if there is any error. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-23clk: qcom: Fix clk_get_parent function return valueGeorgi Djakov2-9/+24
According to the common clock framework API, the clk_get_parent() function should return u8. Currently we are returning negative values on error. Fix this and use the default parent in case of an error. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-23clk: qcom: fix RCG M/N counter configurationArchit Taneja1-1/+1
Currently, a RCG's M/N counter (used for fraction division) is set to either 'bypass' (counter disabled) or 'dual edge' (counter enabled) based on whether the corresponding rcg struct has a mnd field specified and a non-zero N. In the case where M and N are the same value, the M/N counter is still enabled by code even though no division takes place. Leaving the RCG in such a state can result in improper behavior. This was observed with the DSI pixel clock RCG when M and N were both set to 1. Add an additional check (M != N) to enable the M/N counter only when it's needed for fraction division. Signed-off-by: Archit Taneja <architt@codeaurora.org> Fixes: bcd61c0f535a (clk: qcom: Add support for root clock generators (RCGs)) Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-12Merge branch 'clk-fixes' into clk-nextStephen Boyd3-5/+16
2015-03-12clk: qcom: Properly change rates for ahbix clockStephen Boyd3-3/+65
The ahbix clock can never be turned off in practice. To change the rates we need to switch the mux off the M/N counter to an always on source (XO), reprogram the M/N counter to get the rate we want and finally switch back to the M/N counter. Add a new ops structure for this type of clock so that we can set the rate properly. Fixes: c99e515a92e9 "clk: qcom: Add IPQ806X LPASS clock controller (LCC) driver" Tested-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-03-12clk: qcom: Fix i2c frequency tableStephen Boyd1-1/+1
PXO is 25MHz, not 27MHz. Fix the table. Fixes: 24d8fba44af3 "clk: qcom: Add support for IPQ8064's global clock controller (GCC)" Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Andy Gross <agross@codeaurora.org> Tested-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-25clk: qcom: fix platform_no_drv_owner.cocci warningskbuild test robot1-1/+0
drivers/clk/qcom/lcc-msm8960.c:577:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-25clk: qcom: fix platform_no_drv_owner.cocci warningskbuild test robot1-1/+0
drivers/clk/qcom/lcc-ipq806x.c:465:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci CC: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-25clk: qcom: Add PLL4 vote clockStephen Boyd1-0/+13
This clock is needed for most audio clock frequencies. Add it. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-25clk: qcom: lcc-msm8960: Fix PLL rate detectionStephen Boyd1-1/+1
regmap_read() returns 0 on success, not the value of the register that is read. Fix it so we properly detect the frequency plan. Fixes: b82875ee07e5 "clk: qcom: Add MSM8960/APQ8064 LPASS clock controller (LCC) driver" Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-25clk: qcom: Fix slimbus n and m val offsetsStephen Boyd1-2/+2
These shifts were copy/pasted from the pcm which is a different size RCG. Use the correct offsets so that slimbus rates are correct. Fixes: b82875ee07e5 "clk: qcom: Add MSM8960/APQ8064 LPASS clock controller (LCC) driver" Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-02-02clk: Add rate constraints to clocksTomeu Vizoso3-2/+15
Adds a way for clock consumers to set maximum and minimum rates. This can be used for thermal drivers to set minimum rates, or by misc. drivers to set maximum rates to assure a minimum performance level. Changes the signature of the determine_rate callback by adding the parameters min_rate and max_rate. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [sboyd@codeaurora.org: set req_rate in __clk_init] Signed-off-by: Michael Turquette <mturquette@linaro.org> [mturquette@linaro.org: min/max rate for sun6i_ahb1_clk_determine_rate migrated clk-private.h changes to clk.c]
2015-01-27clk: qcom: Add MSM8960/APQ8064 LPASS clock controller (LCC) driverStephen Boyd3-0/+595
Add an LCC driver for MSM8960/APQ8064 that supports the i2s, slimbus, and pcm clocks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-27clk: qcom: Add IPQ806X LPASS clock controller (LCC) driverRajendra Nayak4-0/+495
Add an LCC driver for IPQ806x that supports the i2s, S/PDIF, and pcm clocks. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Josh Cartwright <joshc@codeaurora.org> [sboyd@codeaurora.org: Reworded commit text, added Kconfig select, fleshed out Kconfig description a bit more, added pll4 configuration and reworked probe for it, added muxes, split out dt-binding file] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-27clk: qcom: Add simple regmap based muxesStephen Boyd3-0/+89
Add support for muxes that use regmap instead of readl/writel directly. We don't support as many features as clk-mux.c, but this is good enough to support getting and setting parents. Adding a table based lookup can be added in the future if needed. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-27clk: qcom: Add support for regmap divider clocksJosh Cartwright3-0/+100
Add support for dividers that use regmap instead of readl/writel. Signed-off-by: Josh Cartwright <joshc@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> [sboyd@codeaurora.org: Switch to using generic divider code, drop enable/disable, reword commit text] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Kenneth Westfield <kwestfie@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-12-20Merge tag 'clk-for-linus-3.19' of git://git.linaro.org/people/mike.turquette/linuxLinus Torvalds3-20/+30
Pull clk framework updates from Mike Turquette: "This is much later than usual due to several last minute bugs that had to be addressed. As usual the majority of changes are new drivers and modifications to existing drivers. The core recieved many fixes along with the groundwork for several large changes coming in the future which will better parition clock providers from clock consumers" * tag 'clk-for-linus-3.19' of git://git.linaro.org/people/mike.turquette/linux: (86 commits) clk: samsung: Fix Exynos 5420 pinctrl setup and clock disable failure due to domain being gated ARM: OMAP3: clock: fix boot breakage in legacy mode ARM: OMAP2+: clock: fix DPLL code to use new determine rate APIs clk: Really fix deadlock with mmap_sem clk: mmp: fix sparse non static symbol warning clk: Change clk_ops->determine_rate to return a clk_hw as the best parent clk: change clk_debugfs_add_file to take a struct clk_hw clk: Don't expose __clk_get_accuracy clk: Don't try to use a struct clk* after it could have been freed clk: Remove unused function __clk_get_prepare_count clk: samsung: Fix double add of syscore ops after driver rebind clk: samsung: exynos4: set parent of sclk_hdmiphy to hdmi clk: samsung: exynos4415: Fix build with PM_SLEEP disabled clk: samsung: remove unnecessary inclusion of header files from clk.h clk: samsung: remove unnecessary CONFIG_OF from clk.c clk: samsung: Spelling s/bwtween/between/ clk: rockchip: Add support for the mmc clock phases using the framework clk: rockchip: add bindings for the mmc clocks clk: rockchip: rk3288 export i2s0_clkout for use in DT clk: rockchip: use clock ID for DMC (memory controller) on rk3288 ...
2014-12-14Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds5-5/+0
Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-03clk: Change clk_ops->determine_rate to return a clk_hw as the best parentTomeu Vizoso3-20/+30
This is in preparation for clock providers to not have to deal with struct clk. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-11-17clk: qcom: Fix duplicate rbcpr clock nameGeorgi Djakov1-1/+1
There is a duplication in a clock name for apq8084 platform that causes the following warning: "RBCPR_CLK_SRC" redefined Resolve this by adding a MMSS_ prefix to this clock and making its name coherent with msm8974 platform. Fixes: 2b46cd23a5a2 ("clk: qcom: Add APQ8084 Multimedia Clock Controller (MMCC) support") Signed-off-by: Georgi Djakov <gdjakov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-10-20clk: qcom: drop owner assignment from platform_driversWolfram Sang5-5/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-26Merge tag 'qcom-clocks-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into clk-nextMike Turquette9-88/+219
qcom clock changes for 3.18 Some fixes for the IPQ driver and some code consolidation and refactoring.
2014-09-25clk: Remove .owner field for driverKiran Padwal3-3/+0
There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-09-22clk: qcom: Add support for banked MD RCGsStephen Boyd3-56/+77
The banked MD RCGs in global clock control have a different register layout than the ones implemented in multimedia clock control. Add support for these types of clocks so we can change the rates of the UBI32 clocks. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2014-09-22clk: qcom: Add support for setting rates on PLLsStephen Boyd2-1/+87
Some PLLs may require changing their rate at runtime. Add support for these PLLs. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.