aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk/renesas/rcar-gen3-cpg.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-04-11clk: renesas: r8a77995: Add RPC clocksGeert Uytterhoeven1-1/+4
Describe the various clocks used by the SPI Multi I/O Bus Controller (RPC-IF) on the R-Car D3 SoC: RPCSRC internal clock, RPC{,D2} clocks derived from it, and RPC-IF module clock. The RPCSRC clock divider on R-Car D3 is very similar to the one on R-Car E3, but uses a different pre-divider for the PLL0 parent. Add a new macro to describe it, reusing the existing clock type for R-Car E3. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/3fd1e886b7737cd0e199603bae81d01be9dcf3aa.1648546700.git.geert+renesas@glider.be
2021-11-19clk: renesas: rcar-gen3: Add dummy SDnH clockWolfram Sang1-0/+4
Currently, SDnH is handled together with SDn. This caused lots of problems, so we want SDnH as a separate clock. Introduce a dummy SDnH type here which creates a fixed-factor clock with factor 1. That allows us to convert the per-SoC CPG drivers while keeping the old behaviour for now. A later patch then will add the proper functionality. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20211110191610.5664-2-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-12-10clk: renesas: r8a774c0: Add RPC clocksLad Prabhakar1-0/+5
Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it, as well as the RPC-IF module clock, in the RZ/G2E (R8A774C0) CPG/MSSR driver. Add new clk type CLK_TYPE_GEN3_E3_RPCSRC to register rpcsrc as a fixed clock on R-Car Gen3 E3 (and also RZ/G2E which is identical to E3 SoC), parent and the divider is set based on the register value CPG_RPCCKCR[4:3] which has been set prior to booting the kernel. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20201116101002.5986-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-05-07Merge branches 'clk-stm32f4', 'clk-tegra', 'clk-at91', 'clk-sifive-fu540' and 'clk-spdx' into clk-nextStephen Boyd1-2/+2
- Support for STM32F769 - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support * clk-stm32f4: clk: stm32mp1: Add ddrperfm clock clk: stm32: Introduce clocks of STM32F769 board * clk-tegra: clk: tegra: divider: Mark Memory Controller clock as read-only clk: tegra: emc: Replace BUG() with WARN_ONCE() clk: tegra: emc: Fix EMC max-rate clamping clk: tegra: emc: Support multiple RAM codes clk: tegra: emc: Don't enable EMC clock manually clk: tegra124: Remove lock-enable bit from PLLM clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider clk: tegra: Don't enable already enabled PLLs * clk-at91: clk: at91: Mark struct clk_range as const clk: at91: add sam9x60 pmc driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 PLL driver clk: at91: master: Add sam9x60 support clk: at91: usb: Add sam9x60 support clk: at91: allow configuring generated PCR layout clk: at91: allow configuring peripheral PCR layout clk: at91: sckc: handle different RC startup time clk: at91: modernize sckc binding dt-bindings: clock: at91: new sckc bindings * clk-sifive-fu540: clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library dt-bindings: clk: add documentation for the SiFive PRCI driver * clk-spdx: clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier
2019-05-01clk: renesas: Use the correct style for SPDX License IdentifierNishad Kamdar1-2/+2
This patch corrects the SPDX License Identifier style in header files related to Clock Drivers for Renesas Socs. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2Simon Horman1-1/+0
After recent reworking of Z and Z2 clk handling CLK_TYPE_GEN3_Z and CLK_TYPE_GEN3_Z2 have come to have precisely the same meaning. Remove this redundancy by eliminating the latter. This is not expected to have any run-time effect. As suggested by Geert Uytterhoeven. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offsetSimon Horman1-2/+2
Parameterise the offset of control bits within the FRQCRC register for Z and Z2 clocks. This is in preparation for supporting the Z2 clock on the R-Car E3 (r8a77990) SoC which uses a different offset for control bits to other, already, supported SoCs. As suggested by Geert Uytterhoeven. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisorTakeshi Kihara1-0/+4
Parameterise Z and Z2 clock fixed divisor to allow clocks with a fixed divisor other than 2, the value used by all such clocks supported to date. This is in preparation for supporting the Z2 clock on the R-Car E3 (r8a77990) SoC which has a fixed divisor of 4. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [simon: squashed several patches; rewrote changelog; added r8a774a1 change] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-05clk: renesas: rcar-gen3: Add RPC clocksSergei Shtylyov1-0/+4
The RPCSRC internal clock is controlled by the RPCCKCR.DIV[4:3] on all the R-Car gen3 SoCs except V3M (R8A77970) but the encoding of this field is different between SoCs; it makes sense to support the most common case of this encoding in the R-Car gen3 CPG driver... After adding the RPCSRC clock, we can add the RPC[D2] clocks derived from it and controlled by the RPCCKCR register on all the R-Car gen3 SoCs except V3M (R8A77970); the composite clock driver seems handy for this task, using the spinlock added in the previous patch... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-10-18Merge branch 'clk-renesas' into clk-nextStephen Boyd1-5/+23
* clk-renesas: (36 commits) clk: renesas: r7s9210: Add SPI clocks clk: renesas: r7s9210: Move table update to separate function clk: renesas: r7s9210: Convert some clocks to early clk: renesas: cpg-mssr: Add early clock support clk: renesas: r8a77970: Add TPU clock clk: renesas: r8a77990: Fix incorrect PLL0 divider in comment dt-bindings: clock: renesas: cpg-mssr: Document r8a774c0 clk: renesas: cpg-mssr: Add r8a774c0 support clk: renesas: Add r8a774c0 CPG Core Clock Definitions clk: renesas: r8a7743: Add r8a7744 support clk: renesas: Add r8a7744 CPG Core Clock Definitions dt-bindings: clock: renesas: cpg-mssr: Document r8a7744 binding dt-bindings: clock: renesas: Convert to SPDX identifiers clk: renesas: cpg-mssr: Add R7S9210 support clk: renesas: r8a77970: Add TMU clocks clk: renesas: r8a77970: Add CMT clocks clk: renesas: r9a06g032: Fix UART34567 clock rate clk: renesas: r8a77970: Add SD0H/SD0 clocks for SDHI clk: renesas: r8a77980: Add CMT clocks clk: renesas: r8a77990: Add missing I2C7 clock ...
2018-09-28clk: renesas: Convert to SPDX identifiersKuninori Morimoto1-5/+2
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> [rebased against clk-spdx] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-09-03clk: renesas: r8a77970: Add SD0H/SD0 clocks for SDHISergei Shtylyov1-0/+3
On R-Car V3M (AKA R8A77970), the SD0CKCR is laid out differently than on the other R-Car gen3 SoCs. In fact, the layout is the same as on R-Car gen2 SoCs, so we'll need to copy the divisor tables from the R-Car gen2 driver. We'll also need to support the SoC specific clock types, thus we're adding CLK_TYPE_GEN3_SOC_BASE at the end of 'enum rcar_gen3_clk_types', declare SD0H/SDH clocks in 'enum r8a77970_clk_types', and handle those clocks in the overridden cpg_clk_register() method; then, finally, add the SD-IF module clock (derived from the SD0 clock). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-08-27clk: renesas: rcar-gen3: Add support for mode pin clock selectionGeert Uytterhoeven1-4/+9
Make the existing support for selecting between clean and SSCG clocks using MD12 more generic, to allow using other mode pins for arbitrary clock selection. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-27clk: renesas: rcar-gen3: Add support for RCKSEL clock selectionGeert Uytterhoeven1-1/+6
Add a clock type and macro for defining clocks where the parent and divider are selected based on the value of the RCKCR.CKSEL bit. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-08-27clk: renesas: rcar-gen3: Add support for OSC EXTAL predividerGeert Uytterhoeven1-0/+4
Add a clock type and macro for defining clocks using the OSC EXTAL predivider combined with a fixed divider. On most R-Car Gen3 SoCs, the predivider value depends on mode pins, and thus must be specified in the configuration structure. Inspired by a patch in the BSP by Takeshi Kihara <takeshi.kihara.df@renesas.com>. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-02-12clk: renesas: rcar-gen3: Add Z2 clock divider supportTakeshi Kihara1-0/+1
This patch adds Z2 clock divider support for R-Car Gen3 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-02-12clk: renesas: rcar-gen3: Add Z clock divider supportTakeshi Kihara1-0/+1
This patch adds Z clock divider support for R-Car Gen3 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-10-20clk: renesas: cpg-mssr: Add support to restore core clocks during resumeGeert Uytterhoeven1-1/+2
On R-Car Gen3 systems, PSCI system suspend powers down the SoC, possibly losing clock configuration. Hence add a notifier chain that can be used by core clocks to save/restore clock state during system suspend/resume. The implementation of the actual clock state save/restore operations is clock-specific, and to be registered with the notifier chain in the SoC or family-specific cpg_mssr_info.cpg_clk_register() callback. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
2017-08-16clk: renesas: rcar-gen3: Add support for SCCG/Clean peripheral clocksGeert Uytterhoeven1-0/+7
On R-Car Gen3 SoCs with a Spread Spectrum Clock Generator (e.g. R-Car D3), a peripheral clock divider has been added, to select between clean and spread spectrum parents. Add a new clock type to the R-Car Gen3 driver core to handle this. To avoid increasing the size of struct cpg_core_clk, both parents and dividers are stored in the existing parent resp. div fields. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-08-16clk: renesas: rcar-gen3: Add divider support for PLL1 and PLL3Geert Uytterhoeven1-3/+5
On some R-Car Gen3 SoCs (e.g. R-Car D3), PLL1 and PLL3 use a divider value different from one. Extend struct rcar_gen3_cpg_pll_config to handle this. As all multipliers and dividers are small, table size increase can be kept limited by storing them in u8s instead of unsigned ints, which saves ca. 0.5 KiB for a generic kernel. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@codeaurora.org>
2017-03-21clk: renesas: rcar-gen3-cpg: Pass mode pins to rcar_gen3_cpg_init()Geert Uytterhoeven1-1/+1
Pass the mode pin states from the SoC-specific CPG/MSSR driver to the R-Car Gen3 CPG driver core, as their state will be needed to make some core clock configuration decisions. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-11-02clk: renesas: rcar-gen3-cpg: Remove obsolete rcar_gen3_read_mode_pins()Geert Uytterhoeven1-1/+0
All R-Car Gen3 clock drivers now obtain the values of the mode pins from the R-Car RST driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2016-06-06clk: renesas: cpg-mssr: Extract common R-Car Gen3 support codeGeert Uytterhoeven1-0/+43
Extract the code to support parts common to all members of the R-Car Gen3 SoC family into a separate file, to ease sharing among SoC-specific drivers. Note that while the cpg_pll_configs[] arrays and the selection of the config based on the MODE bits are identical on R-Car H3 and R-Car M3-W, they are not common, and may be different on other R-Car Gen3 SoCs. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Simon Horman <horms+renesas@verge.net.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.