aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-16Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds124-6/+130
Pull more clk framework updates from Stephen Boyd: "One more patch to remove io.h from clk-provider.h. We used to need this include when we had clk_readl() and clk_writel(), but those are gone now so this patch pushes the dependency out to the users of clk-provider.h" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Remove io.h from clk-provider.h
2019-05-16Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds1-2/+2
Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: Among the larger pieces: - Power management improvements for TI am335x and am437x (RTC suspend/wake) - Misc new additions for Amlogic (socinfo updates) - ZynqMP FPGA manager - Nvidia improvements for reset/powergate handling - PMIC wrapper for Mediatek MT8516 - Misc fixes/improvements for ARM SCMI, TEE, NXP i.MX SCU drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (57 commits) soc: aspeed: fix Kconfig soc: add aspeed folder and misc drivers spi: zynqmp: Fix build break soc: imx: Add generic i.MX8 SoC driver MAINTAINERS: Update email for Qualcomm SoC maintainer memory: tegra: Fix a typos for "fdcdwr2" mc client Revert "ARM: tegra: Restore memory arbitration on resume from LP1 on Tegra30+" memory: tegra: Replace readl-writel with mc_readl-mc_writel memory: tegra: Fix integer overflow on tick value calculation memory: tegra: Fix missed registers values latching ARM: tegra: cpuidle: Handle tick broadcasting within cpuidle core on Tegra20/30 optee: allow to work without static shared memory soc/tegra: pmc: Move powergate initialisation to probe soc/tegra: pmc: Remove reset sysfs entries on error soc/tegra: pmc: Fix reset sources and levels soc: amlogic: meson-gx-pwrc-vpu: Add support for G12A soc: amlogic: meson-gx-pwrc-vpu: Fix power on/off register bitmask fpga manager: Adding FPGA Manager support for Xilinx zynqmp dt-bindings: fpga: Add bindings for ZynqMP fpga driver firmware: xilinx: Add fpga API's ...
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd124-6/+130
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-07Merge branch 'clk-parent-rewrite-1' into clk-nextStephen Boyd4-113/+322
- Rewrite how clk parents can be specified to be DT/clkdev based instead of just string based * clk-parent-rewrite-1: clk: Cache core in clk_fetch_parent_index() without names clk: fixed-factor: Initialize clk_init_data on stack clk: fixed-factor: Let clk framework find parent clk: Allow parents to be specified via clkspec index clk: Look for parents with clkdev based clk_lookups clk: Allow parents to be specified without string names clk: Add of_clk_hw_register() API for early clk drivers driver core: Let dev_of_node() accept a NULL dev clk: Prepare for clk registration API that uses DT nodes clkdev: Move clk creation outside of 'clocks_mutex'
2019-05-07Merge branch 'clk-ti' into clk-nextStephen Boyd15-18/+40
* clk-ti: clk: Remove CLK_IS_BASIC clk flag clk: ti: dra7: disable the RNG and TIMER12 clkctrl clocks on HS devices clk: ti: dra7x: prevent non-existing clkctrl clocks from registering ARM: omap2+: hwmod: drop CLK_IS_BASIC flag usage clk: ti: export the omap2_clk_is_hw_omap call
2019-05-07Merge branches 'clk-stm32f4', 'clk-tegra', 'clk-at91', 'clk-sifive-fu540' and 'clk-spdx' into clk-nextStephen Boyd52-229/+2265
- Support for STM32F769 - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support * clk-stm32f4: clk: stm32mp1: Add ddrperfm clock clk: stm32: Introduce clocks of STM32F769 board * clk-tegra: clk: tegra: divider: Mark Memory Controller clock as read-only clk: tegra: emc: Replace BUG() with WARN_ONCE() clk: tegra: emc: Fix EMC max-rate clamping clk: tegra: emc: Support multiple RAM codes clk: tegra: emc: Don't enable EMC clock manually clk: tegra124: Remove lock-enable bit from PLLM clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider clk: tegra: Don't enable already enabled PLLs * clk-at91: clk: at91: Mark struct clk_range as const clk: at91: add sam9x60 pmc driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 PLL driver clk: at91: master: Add sam9x60 support clk: at91: usb: Add sam9x60 support clk: at91: allow configuring generated PCR layout clk: at91: allow configuring peripheral PCR layout clk: at91: sckc: handle different RC startup time clk: at91: modernize sckc binding dt-bindings: clock: at91: new sckc bindings * clk-sifive-fu540: clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library dt-bindings: clk: add documentation for the SiFive PRCI driver * clk-spdx: clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier
2019-05-07Merge branches 'clk-hisi', 'clk-lochnagar', 'clk-allwinner', 'clk-rockchip' and 'clk-qoriq' into clk-nextStephen Boyd17-66/+576
- Mark UFS clk as critical on Hi-Silicon hi3660 SoCs - Support for Cirrus Logic Lochnagar clks * clk-hisi: clk: hi3660: Mark clk_gate_ufs_subsys as critical * clk-lochnagar: clk: lochnagar: Add support for the Cirrus Logic Lochnagar clk: lochnagar: Add initial binding documentation * clk-allwinner: clk: sunxi-ng: sun5i: Export the MBUS clock clk: sunxi-ng: a83t: Add pll-video0 as parent of csi-mclk clk: sunxi-ng: h6: Allow video & vpu clocks to change parent rate clk: sunxi-ng: h6: Preset hdmi-cec clock parent clk: sunxi: Add Kconfig options clk: sunxi-ng: f1c100s: fix USB PHY gate bit offset clk: sunxi-ng: Allow DE clock to set parent rate * clk-rockchip: clk: rockchip: undo several noc and special clocks as critical on rk3288 clk: rockchip: add a COMPOSITE_DIV_OFFSET clock-type clk: rockchip: Turn on "aclk_dmac1" for suspend on rk3288 clk: rockchip: Limit use of USB PHY clock to USB on rk3288 clk: rockchip: Fix video codec clocks on rk3288 clk: rockchip: Make rkpwm a critical clock on rk3288 clk: rockchip: fix wrong clock definitions for rk3328 * clk-qoriq: clk: qoriq: increase array size of cmux_to_group dt-bindings: qoriq-clock: Add ls1028a chip compatible string clk: qoriq: Add ls1028a clock configuration clk: qoriq: add more PLL divider clocks support dt-bindings: qoriq-clock: add more PLL divider clocks support
2019-05-07Merge branches 'clk-sa', 'clk-aspeed', 'clk-samsung', 'clk-ingenic' and 'clk-zynq' into clk-nextStephen Boyd12-90/+178
- Various static analysis fixes/finds - Video Engine (ECLK) support on Aspeed SoCs - Xilinx ZynqMP Versal platform support - Convert Xilinx ZynqMP driver to be struct oriented * clk-sa: clk: mvebu: fix spelling mistake "gatable" -> "gateable" clk: ux500: add range to usleep_range clk: tegra: Make tegra_clk_super_mux_ops static clk: davinci: cfgchip: use PTR_ERR_OR_ZERO in da8xx_cfgchip_register_div4p5 * clk-aspeed: clk: Aspeed: Setup video engine clocking * clk-samsung: clk: samsung: exynos5410: Add gate clock for ADC clk: samsung: dt-bindings: Add ADC clock ID to Exynos5410 clk: samsung: dt-bindings: Put CLK_UART3 in order * clk-ingenic: clk: ingenic: jz4725b: Add UDC PHY clock dt-bindings: clock: jz4725b-cgu: Add UDC PHY clock * clk-zynq: clk: zynqmp: use structs for clk query responses clk: zynqmp: fix check for fractional clock clk: zynqmp: do not export zynqmp_clk_register_* functions clk: zynqmp: fix kerneldoc of __zynqmp_clock_get_parents drivers: clk: Update clock driver to handle clock attribute drivers: clk: zynqmp: Allow zero divisor value
2019-05-07Merge branches 'clk-doc', 'clk-more-critical', 'clk-meson' and 'clk-basic-be' into clk-nextStephen Boyd29-626/+2363
- Remove clk_readl() and introduce BE versions of basic clk types * clk-doc: clk: Drop duplicate clk_register() documentation clk: Document and simplify clk_core_get_rate_nolock() clk: Remove 'flags' member of struct clk_fixed_rate clk: nxp: Drop 'flags' on fixed_rate clk macro clk: Document __clk_mux_determine_rate() clk: Document CLK_MUX_READ_ONLY mux flag clk: Document deprecated things clk: Collapse gpio clk kerneldoc * clk-more-critical: clk: highbank: Convert to CLK_IS_CRITICAL * clk-meson: (21 commits) clk: meson: axg-audio: add g12a support clk: meson: axg-audio: don't register inputs in the onecell data clk: meson: axg_audio: replace prefix axg by aud dt-bindings: clk: axg-audio: add g12a support clk: meson: meson8b: add the video decoder clock trees clk: meson: meson8b: add the VPU clock trees clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2 clk: meson: meson8b: use a separate clock table for Meson8m2 dt-bindings: clock: meson8b: export the video decoder clocks clk: meson-g12a: add video decoder clocks dt-bindings: clock: meson8b: export the VPU clock clk: meson-g12a: add PCIE PLL clocks dt-bindings: clock: g12a-aoclk: expose CLKID_AO_CTS_OSCIN clk: meson-pll: add reduced specific clk_ops for G12A PCIe PLL dt-bindings: clock: meson8b: drop the "ABP" clock definition clk: meson: g12a: add cpu clocks dt-bindings: clk: g12a-clkc: add VDEC clock IDs dt-bindings: clock: axg-audio: unexpose controller inputs dt-bindings: clk: g12a-clkc: add PCIE PLL clock ID clk: g12a-aoclk: re-export CLKID_AO_SAR_ADC_SEL clock id ... * clk-basic-be: clk: core: replace clk_{readl,writel} with {readl,writel} clk: core: remove powerpc special handling powerpc/512x: mark clocks as big endian clk: mux: add explicit big endian support clk: multiplier: add explicit big endian support clk: gate: add explicit big endian support clk: fractional-divider: add explicit big endian support clk: divider: add explicit big endian support
2019-05-07Merge branches 'clk-renesas', 'clk-qcom', 'clk-mtk', 'clk-milbeaut' and 'clk-imx' into clk-nextStephen Boyd52-203/+4615
- Qualcomm QCS404 CDSP clk support - Qualcomm QCS404 Turing clk support - Mediatek MT8183 clock support - Mediatek MT8516 clock support - Milbeaut M10V clk controller support * clk-renesas: clk: renesas: rcar-gen3: Remove unused variable clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value clk: renesas: r8a77980: Fix RPC-IF module clock's parent clk: renesas: rcar-gen3: Rename DRIF clocks clk: renesas: rcar-gen3: Correct parent clock of Audio-DMAC clk: renesas: rcar-gen3: Correct parent clock of SYS-DMAC clk: renesas: rcar-gen3: Correct parent clock of HS-USB clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCI clk: renesas: r8a774c0: Add Z2 clock clk: renesas: r8a77990: Add Z2 clock clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parents math64: New DIV64_U64_ROUND_CLOSEST helper clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2 clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offset clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisor clk: renesas: r9a06g032: Add missing PCI USB clock clk: renesas: r7s9210: Always use readl() clk: renesas: rcar-gen3: Pass name/offset to cpg_sd_clk_register() * clk-qcom: clk: qcom: Skip halt checks on gcc_pcie_0_pipe_clk for 8998 clk: qcom: Add QCS404 TuringCC clk: qcom: branch: Add AON clock ops dt-bindings: clock: Introduce Qualcomm Turing Clock controller clk: qcom: gcc-qcs404: Add CDSP related clocks and resets * clk-mtk: clk: mediatek: add clock driver for MT8516 dt-bindings: mediatek: apmixedsys: add support for MT8516 dt-bindings: mediatek: infracfg: add support for MT8516 dt-bindings: mediatek: topckgen: add support for MT8516 clk: mediatek: Allow changing PLL rate when it is off clk: mediatek: Add MT8183 clock support clk: mediatek: Add configurable pcw_chg_reg to mtk_pll_data clk: mediatek: Add dt-bindings for MT8183 clocks dt-bindings: ARM: Mediatek: Document bindings for MT8183 clk: mediatek: Add configurable pcwibits and fmin to mtk_pll_data clk: mediatek: Add new clkmux register API clk: mediatek: Disable tuner_en before change PLL rate * clk-milbeaut: clock: milbeaut: Add Milbeaut M10V clock controller dt-bindings: clock: milbeaut: add Milbeaut clock description * clk-imx: clk: imx: correct pfdv2 gate_bit/vld_bit operations clk: imx: clk-pllv3: mark expected switch fall-throughs clk: imx8mq: Add dsi_ipg_div clk: imx: pllv4: add fractional-N pll support clk: imx: keep uart clock on during system boot clk: imx: correct i.MX7D AV PLL num/denom offset clk: imx6sll: Fix mispelling uart4_serial as serail clk: imx: pll14xx: drop unused variable clk: imx: rename clk-imx51-imx53.c to clk-imx5.c clk: imx5: Fix i.MX50 ESDHC clock registers clk: imx5: Fix i.MX50 mainbus clock registers clk: imx: Remove unused imx_get_clk_hw_fixed dt-bindings: clock: imx7ulp: remove SNVS clock clk: imx7ulp: remove snvs clock
2019-05-03clk: Cache core in clk_fetch_parent_index() without namesStephen Boyd1-10/+27
If a clk has specified parents via clk_hw pointers it won't specify the globally unique names for the parents. Without the unique names, we can't fallback to comparing them against the name of the 'parent' pointer here. Therefore, do a pointer comparison against the clk_hw pointers too and cache the clk_core structure if they match. This fixes parent lookup code for clks that only specify clk_hw pointers and nothing else, like muxes that are purely inside a clk controller. Similarly, if the parent pointer isn't cached after trying to match clk_core or clk_hw pointers, lookup the pointer from DT or via clkdev lookups instead of relying purely on the globally unique clk name match. This should allow us to move away from having to specify global names for clk parents entirely. While we're in the area, add some comments so it's clearer what's going on. The if statements don't lend themselves to much clarity in their raw form. Fixes: fc0c209c147f ("clk: Allow parents to be specified without string names") Reported-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-03clk: imx: correct pfdv2 gate_bit/vld_bit operationsAnson Huang1-5/+5
The operations of pfdv2 gate_bit/valid_bit are incorrect, they are defined as u8 for bit offset, but gate_bit is actually assigned as mask which could be 32 bit long and it causes overflow, and vld_bit is assigned as bit offset based on incorrect gate_bit value, it causes incorrect pfd clock gate status in clock tree, this patch fixes the issue by assigning them as correct bit offset. Fixes: 9fcb6be3b6c9 ("clk: imx: add pfdv2 support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-03clk: sifive: add a driver for the SiFive FU540 PRCI IP blockPaul Walmsley5-0/+647
Add driver code for the SiFive FU540 PRCI IP block. This IP block handles reset and clock control for the SiFive FU540 device and implements SoC-level clock tree controls and dividers. Based on code written by Wesley Terpstra <wesley@sifive.com>: https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60 Boot and PLL rate change were tested on a SiFive HiFive Unleashed board. This version includes several changes requested by Stephen Boyd <sboyd@kernel.org>. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Wesley W. Terpstra <wesley@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Megan Wachs <megan@sifive.com> Cc: linux-riscv@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-clk@vger.kernel.org [sboyd@kernel.org: Fix some const and ARRAY_SIZE() issues, make makefile only descend if CLK_SIFIVE=y] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-03clk: analogbits: add Wide-Range PLL libraryPaul Walmsley5-0/+372
Add common library code for the Analog Bits Wide-Range PLL (WRPLL) IP block, as implemented in TSMC CLN28HPC. There is no bus interface or register target associated with this PLL. This library is intended to be used by drivers for IP blocks that expose registers connected to the PLL configuration and status signals. Based on code originally written by Wesley Terpstra <wesley@sifive.com>: https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60 This version incorporates several changes requested by Stephen Boyd <sboyd@kernel.org>. Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Wesley Terpstra <wesley@sifive.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Megan Wachs <megan@sifive.com> Cc: linux-clk@vger.kernel.org Cc: linux-kernel@vger.kernel.org [sboyd@kernel.org: Fix some const issues] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-03clk: imx: clk-pllv3: mark expected switch fall-throughsGustavo A. R. Silva1-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/clk/imx/clk-pllv3.c: In function ‘imx_clk_pllv3’: drivers/clk/imx/clk-pllv3.c:446:18: warning: this statement may fall through [-Wimplicit-fallthrough=] pll->div_shift = 1; ~~~~~~~~~~~~~~~^~~ drivers/clk/imx/clk-pllv3.c:447:2: note: here case IMX_PLLV3_USB: ^~~~ drivers/clk/imx/clk-pllv3.c:453:21: warning: this statement may fall through [-Wimplicit-fallthrough=] pll->denom_offset = PLL_IMX7_DENOM_OFFSET; ^ drivers/clk/imx/clk-pllv3.c:454:2: note: here case IMX_PLLV3_AV: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: b4a4cb5a0454 ("clk: imx: correct i.MX7D AV PLL num/denom offset") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-02clk: imx8mq: Add dsi_ipg_divGuido Günther1-0/+1
It's defined in imx8mq-clock.h but wasn't assigned yet. It's used as clk_tx_esc in the nwl dsi host controller (i.MX8MQ RM, Rev. 0, 01/2018 Sect. 13.5.3.7.4). Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-01clk: imx: pllv4: add fractional-N pll supportAnson Huang1-9/+63
The pllv4 supports fractional-N function, the formula is: PLL output freq = input * (mult + num/denom), This patch adds fractional-N function support, including clock round rate, calculate rate and set rate, with this patch, the clock rate of APLL in clock tree is more accurate than before: Without fraction: apll_pre_sel 1 1 1 24000000 0 0 50000 apll_pre_div 1 1 2 24000000 0 0 50000 apll 1 1 2 528000000 0 0 50000 apll_pfd3 0 0 0 792000000 0 0 50000 apll_pfd2 0 0 0 339428571 0 0 50000 apll_pfd1 0 0 0 352000000 0 0 50000 usdhc0 0 0 0 352000000 0 0 50000 apll_pfd0 1 1 1 352000000 0 0 50000 With fraction: apll_pre_sel 1 1 1 24000000 0 0 50000 apll_pre_div 1 1 2 24000000 0 0 50000 apll 1 1 2 529200000 0 0 50000 apll_pfd3 0 0 0 793800000 0 0 50000 apll_pfd2 0 0 0 340200000 0 0 50000 apll_pfd1 0 0 0 352800000 0 0 50000 usdhc0 0 0 0 352800000 0 0 50000 apll_pfd0 1 1 1 352800000 0 0 50000 Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
2019-05-01clk: sunxi-ng: Use the correct style for SPDX License IdentifierNishad Kamdar2-3/+3
This patch corrects the SPDX License Identifier style in header files related to Clock Drivers for Allwinner SoCs. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-01clk: sprd: Use the correct style for SPDX License IdentifierNishad Kamdar6-6/+6
This patch corrects the SPDX License Identifier style in header files related to Clock Drivers for Spreadtrum SoCs. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-01clk: renesas: Use the correct style for SPDX License IdentifierNishad Kamdar3-6/+6
This patch corrects the SPDX License Identifier style in header files related to Clock Drivers for Renesas Socs. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-01clk: qcom: Use the correct style for SPDX License IdentifierNishad Kamdar1-1/+1
This patch corrects the SPDX License Identifier style in clk-regmap-mux-div.h. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-01clk: davinci: Use the correct style for SPDX License IdentifierNishad Kamdar2-2/+2
This patch corrects the SPDX License Identifier style in header files related to Clock Drivers for Davinci Socs. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-01clk: actions: Use the correct style for SPDX License IdentifierNishad Kamdar9-9/+9
This patch corrects the SPDX License Identifier style in header files related to Clock Drivers for Actions Semi Socs. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-29clk: imx: keep uart clock on during system bootJacky Bai1-0/+16
Keep uart clocks enabled when earlyprintk or earlycon is active. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-29clk: imx: correct i.MX7D AV PLL num/denom offsetAnson Huang3-10/+24
According reference manual, i.MX7D's audio/video PLL's num/denom register offset are 0x20/0x30, they are different from i.MX6's audio/video PLL, correct it by introducing new offset variables for audio/video PLL and using runtime assignment based on PLL type. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-29clk: stm32mp1: Add ddrperfm clockGabriel Fernandez1-0/+3
Add ddrperfm clock for DDR Performance Monitor driver Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Gerald Baeza <gerald.baeza@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-26clk: Remove CLK_IS_BASIC clk flagStephen Boyd11-11/+10
This flag was historically used to indicate that a clk is a "basic" type of clk like a mux, divider, gate, etc. This never turned out to be very useful though because it was hard to cleanly split "basic" clks from other clks in a system. This one flag was a way for type introspection and it just didn't scale. If anything, it was used by the TI clk driver to indicate that a clk_hw wasn't contained in the SoC specific clk structure. We can get rid of this define now that TI is finding those clks a different way. Cc: Tero Kristo <t-kristo@ti.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: James Hogan <jhogan@kernel.org> Cc: <linux-mips@vger.kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: <linux-pwm@vger.kernel.org> Cc: <linux-amlogic@lists.infradead.org> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clock: milbeaut: Add Milbeaut M10V clock controllerSugaya Taichi2-0/+664
The M10V of the Milbeaut SoCs has an on-chip controller that derive mostly clocks from a single external clock, using PLLs, dividers, multiplexers and gates. Since the PLLs have already been started and will not stop / restart, they are fixed factor. The gates will be added in later patch (all of the gates are off state now). Signed-off-by: Sugaya Taichi <sugaya.taichi@socionext.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: imx6sll: Fix mispelling uart4_serial as serailLeonard Crestez1-1/+1
This looks like a copy-paste error. This string is not referenced anywhere so it's safe to rename it. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: imx: pll14xx: drop unused variablePeng Fan1-4/+2
It does not make sense to only get value from pll->base and assign to a local variable when recalc_rate. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: mediatek: add clock driver for MT8516Fabien Parent3-0/+824
Add the clock driver for the MT8516 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: Mark struct clk_range as constStephen Boyd7-14/+14
It's just some static data that doesn't get changed after being used. Mark it const everywhere. Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: add sam9x60 pmc driverAlexandre Belloni2-0/+308
Add a driver for the PMC clocks of the sam9c60. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [sboyd@kernel.org: Staticize spinlock] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: tegra: divider: Mark Memory Controller clock as read-onlyDmitry Osipenko1-1/+2
The Memory Controller (MC) clock rate can't be simply changed and nothing in kernel need to change the rate, hence let's make the clock read-only. This id also needed for the EMC driver because timing configuration may require the MC clock diver to be disabled, that is handled by the EMC clock / EMC driver integration and CLK framework shall not touch the MC divider configuration on the EMC clock rate change. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: tegra: emc: Replace BUG() with WARN_ONCE()Dmitry Osipenko1-1/+4
There is no justification for the BUG() in this code. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: tegra: emc: Fix EMC max-rate clampingDmitry Osipenko1-7/+10
When a clk user requests rate that is higher than the maximum possible, the rate shall be clamped to the maximum and not to the current value. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: tegra: emc: Support multiple RAM codesDmitry Osipenko1-14/+23
The timings parser doesn't append timings, but instead it parses only the first timing and hence doesn't store all of the timings when device-tree has timings for multiple RAM codes. In a result EMC scaling doesn't work if timings are missing. Tested-by: Steev Klimaszewski <steev@kali.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: tegra: emc: Don't enable EMC clock manuallyDmitry Osipenko1-2/+0
The EMC clock marked as critical, hence it is already enabled at the registration time. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: add sam9x60 PLL driverAlexandre Belloni3-0/+337
The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: master: Add sam9x60 supportAlexandre Belloni2-3/+6
The sam9x60 cpu clock is located at a different offset but is otherwise similar to the master clock. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: usb: Add sam9x60 supportAlexandre Belloni2-6/+30
The sam9x60 USB clock supports four different parents, ensure they can be selected. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: allow configuring generated PCR layoutAlexandre Belloni4-24/+29
The PCR register layout for GCLKCSS is changing for the future SoCs, allow configuring it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: allow configuring peripheral PCR layoutAlexandre Belloni6-22/+71
The PCR register actually changed layout for each SoC. By chance, this didn't have impact on sama5d[2-4] support but since sama5d3, PID is seven bits wide and sama5d4 and sama5d2 don't have DIV. For the DT backward compatibility, keep the layout as is. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: stm32: Introduce clocks of STM32F769 boardGabriel Fernandez1-8/+299
STM32F769 clocks are derived from STM32746 clocks. main differences are: - new source clock for SAI1 and SAI2 (HSI or HSE) - Add DFSDM & DSI clocks Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: sckc: handle different RC startup timeAlexandre Belloni1-2/+15
The sama5d3 slow RC oscillator as a different startup time than all the previous SoCs. Handle that using its own compatible. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: at91: modernize sckc bindingAlexandre Belloni1-89/+36
Remove the need for child nodes in the sckc binding and register the whole sckc tree (3 clocks in total) from the sckc node. DT backward compatibility is kept by looking for properties in child nodes when they are not present in the sckc node. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: qoriq: increase array size of cmux_to_groupYogesh Gaur1-2/+2
Increase size of cmux_to_group array, to accomdate entry of -1 termination. Added -1, terminated, entry for 4080_cmux_grpX. Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: qoriq: Add ls1028a clock configurationYuantian Tang1-0/+68
Enable clock driver by adding clock configuration for ls1028a chip. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: qoriq: add more PLL divider clocks supportYuantian Tang1-2/+3
More PLL divider clocks are needed by clock consumer IP. So enlarge the PLL divider array to accommodate more divider clocks. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-25clk: ti: dra7: disable the RNG and TIMER12 clkctrl clocks on HS devicesTero Kristo4-8/+12
RNG and TIMER12 are reserved for secure side usage only on HS devices, so disable their clkctrl clocks on HS SoCs also. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.