aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2022-05-18clk: mediatek: use en_mask as a pure div_en_maskChun-Jie Chen14-131/+127
We no longer allow en_mask to be a combination of pll_en_bit and div_en_mask, so remove pll_en_bit(bit0) from en_mask to make en_mask a pure en_mask that only used for pll dividers. This commit continues the work done in commit 7cc4e1bbe300 ("clk: mediatek: Fix asymmetrical PLL enable and disable control") and commit f384c44754b7 ("clk: mediatek: Add configurable enable control to mtk_pll_data") to clean up en_mask(bit0) default setting. Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com> Link: https://lore.kernel.org/r/20220513073621.12923-1-mandyjh.liu@mediatek.com Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-18clk: ingenic-tcu: Fix missing TCU clock for X1000 SoCsAidan MacDonald1-10/+25
The TCU clock gate on X1000 wasn't requested by the driver and could be gated automatically later on in boot, which prevents timers from running and breaks PWM. Add a workaround to support old device trees that don't specify the "tcu" clock gate. In this case the kernel will print a warning and attempt to continue without the clock, which is wrong, but it could work if "clk_ignore_unused" is in the kernel arguments. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20220412122750.279058-3-aidanmacdonald.0x0@gmail.com Reviewed-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-18clk: mediatek: update compatible string for MT7986 ethsysSam Shih1-1/+1
Update compatible string of mt7986 ethsys clock driver to fit the devicetree bindings document. Signed-off-by: Sam Shih <sam.shih@mediatek.com> Link: https://lore.kernel.org/r/20220509090939.845-2-sam.shih@mediatek.com Fixes: ec97d23c8e22 ("clk: mediatek: add mt7986 clock support") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-18clk: ingenic: Mark critical clocks in Ingenic SoCsAidan MacDonald7-0/+76
Consider CPU, L2 cache, and memory clocks as critical to prevent them -- and the parent clocks -- from being automatically gated, since nothing calls clk_get() on these clocks. Gating the CPU clock hangs the processor, and gating memory makes external DRAM inaccessible. Normal kernel code can't hope to deal with either situation so those clocks have to be critical. The L2 cache is required only if caches are running, and could be gated if the kernel takes care to flush and disable caches before gating the clock. There's no mechanism to do this, and probably no reason to do it, so it's simpler to mark the L2 cache as critical. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220428164454.17908-3-aidanmacdonald.0x0@gmail.com Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> # On X1000 and X1830 Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-18clk: ingenic: Allow specifying common clock flagsAidan MacDonald2-1/+4
Provide a flags field for clocks under the ingenic-cgu driver, which can be used to set generic common clock framework flags on the created clocks. For example, the CLK_IS_CRITICAL flag is needed for some clocks (such as CPU or memory) to stop them being automatically disabled. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220428164454.17908-2-aidanmacdonald.0x0@gmail.com Tested-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> # On X1000 and X1830 Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-18clk: ux500: fix a possible off-by-one in u8500_prcc_reset_base()Hangyu Hua1-1/+1
Off-by-one will happen when index == ARRAY_SIZE(ur->base). Fixes: b14cbdfd467d ("clk: ux500: Add driver for the reset portions of PRCC") Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20220518062537.17933-1-hbh25y@gmail.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-17clk: at91: generated: consider range when calculating best rateCodrin Ciubotariu1-0/+4
clk_generated_best_diff() helps in finding the parent and the divisor to compute a rate closest to the required one. However, it doesn't take into account the request's range for the new rate. Make sure the new rate is within the required range. Fixes: 8a8f4bf0c480 ("clk: at91: clk-generated: create function to find best_diff") Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20220413071318.244912-1-codrin.ciubotariu@microchip.com Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-17clk: imx8mp: fix usb_root_clk parentPeng Fan1-1/+1
According to reference mannual CCGR77(usb) sources from hsio_axi, fix it. Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver") Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220507125430.793287-1-peng.fan@oss.nxp.com Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2022-05-17Revert "clk: sunxi-ng: sun6i-rtc: Add support for H6"Jernej Skrabec1-15/+0
This reverts commit 1738890a3165ccd0da98ebd3e2d5f9b230d5afa8. Commit 1738890a3165 ("clk: sunxi-ng: sun6i-rtc: Add support for H6") breaks HDMI output on Tanix TX6 mini board. Exact reason isn't known, but because that commit doesn't actually improve anything, let's just revert it. Cc: stable@vger.kernel.org Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220511200206.2458274-1-jernej.skrabec@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-17clk: bcm2835: fix bcm2835_clock_choose_divStefan Wahren1-0/+1
The commit 09e3b18ca5de ("clk: bcm2835: Remove unused variable") accidentially breaks the behavior of bcm2835_clock_choose_div() and booting of Raspberry Pi. The removed do_div macro call had side effects, so we need to restore it. Fixes: 09e3b18ca5de ("clk: bcm2835: Remove unused variable") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220428183010.1635248-1-stefan.wahren@i2se.com Tested-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-16clk: fixed-rate: Remove redundant if statementLi Zhengyu1-1/+1
(np) is always true when (dev || !np) is false, so just remove the check. Signed-off-by: Li Zhengyu <lizhengyu3@huawei.com> Link: https://lore.kernel.org/r/20220509092102.140520-1-lizhengyu3@huawei.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-10clk: samsung: exynosautov9: add cmu_peric1 clock supportChanho Park1-0/+254
Like CMU_PERIC0, this provides clocks for USI06 ~ USI11 and USI_I2C. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20220504075154.58819-10-chanho61.park@samsung.com
2022-05-10clk: samsung: exynosautov9: add cmu_peric0 clock supportChanho Park1-0/+254
CMU_PERIC0 provides clocks for USI0 ~ USI5 and USIx_I2C. USI0/1/2/3/4/5 have its own divider but USI_I2Cs share "dout_peric0_usi_i2c" divider. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220504075154.58819-9-chanho61.park@samsung.com
2022-05-10clk: samsung: exynosautov9: add cmu_fsys2 clock supportChanho Park1-0/+69
CMU_FSYS2 is responsible to control clocks of BLK_FSYS2 which includes ufs and ethernet IPs. This patch adds some essential clocks to be controlled by ethernet/ufs drivers instead of listing full clocks. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20220504075154.58819-8-chanho61.park@samsung.com
2022-05-10clk: samsung: exynosautov9: add cmu_busmc clock supportChanho Park1-0/+55
CMU_BUSMC is responsible to control clocks of BLK_BUSMC which represents Data/Peri buses. Most clocks except PDMA/SPDMA are not necessary to be controlled by HLOS. So, this adds PDMA/SPDMA gate clocks. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20220504075154.58819-7-chanho61.park@samsung.com
2022-05-10clk: samsung: exynosautov9: add cmu_peris clock supportChanho Park1-0/+51
CMU_PERIS is responsible to control clocks of BLK_PERIS which has OPT/MCT/WDT and TMU. This patch only supports WDT gate clocks and all other clocks except WDT will be supported later. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20220504075154.58819-6-chanho61.park@samsung.com
2022-05-10clk: samsung: exynosautov9: add cmu_core clock supportChanho Park1-0/+92
Add CMU_CORE clock which represents Core BUS clocks. The source clocks of this CMU block are oscclk or dout_clkcmu_core_bus. Thus, two source clocks should be provided via device tree. All the gate clocks are defined as CLK_IS_CRITICAL because they control(gate/ungate) core bus clocks but not been assigned to any drivers. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20220504075154.58819-5-chanho61.park@samsung.com
2022-05-10clk: samsung: add top clock support for Exynos Auto v9 SoCChanho Park2-0/+959
This adds support for CMU_TOP which generates clocks for all the function blocks such as CORE, FSYS0/1/2, PERIC0/1 and so on. For CMU_TOP, PLL_SHARED0,1,2,3 and 4 will be the sources of this block and they will generate bus clocks. Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Link: https://lore.kernel.org/r/20220504075154.58819-4-chanho61.park@samsung.com
2022-05-07ARM: pxa: move clk register definitions to driverArnd Bergmann6-49/+196
The clock register definitions are now used (almost) exclusively in the clk driver, and that relies on no other mach/*.h header files any more. Remove the dependency on mach/pxa*-regs.h by addressing the registers as offsets from a void __iomem * pointer, which is either passed from a board file, or (for the moment) ioremapped at boot time from a hardcoded address in case of DT (this should be moved into the DT of course). Cc: linux-clk@vger.kernel.org Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07ARM: pxa: move smemc register access from clk to platformArnd Bergmann5-63/+15
The get_sdram_rows() and get_memclkdiv() helpers need smemc register that are separate from the clk registers, move them out of the clk driver, and use an extern declaration instead. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Link: https://lore.kernel.org/lkml/87pnielzo4.fsf@belgarion.home/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-07cpufreq: pxa3: move clk register access to clk driverArnd Bergmann1-0/+16
The driver needs some low-level register access for setting the core and bus frequencies. These registers are owned by the clk driver, so move the low-level access into that driver with a slightly higher-level interface and avoid any machine header file dependencies. Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: linux-clk@vger.kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-05-06clk: sunxi-ng: h616: Add PLL derived 32KHz clockAndre Przywara2-1/+9
The RTC section of the H616 manual mentions in a half-sentence the existence of a clock "32K divided by PLL_PERI(2X)". This is used as one of the possible inputs for the mux that selects the clock for the 32 KHz fanout pad. On the H616 this is routed to pin PG10, and some boards use that clock output to compensate for a missing 32KHz crystal. On the OrangePi Zero2 this is for instance connected to the LPO pin of the WiFi/BT chip. The new RTC clock binding requires this clock to be named as one input clock, so we need to expose this to the DT. In contrast to the D1 SoC there does not seem to be a gate for this clock, so just use a fixed divider clock, using a newly assigned clock number. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220428230933.15262-3-andre.przywara@arm.com
2022-05-06clk: sunxi-ng: h6-r: Add RTC gate clockAndre Przywara2-1/+6
The H6 and H616 feature an (undocumented) bus clock gate for accessing the RTC registers. This seems to be enabled at reset (or by the BootROM), so we got away without it so far, but exists regardless. Since the new RTC clock binding for the H616 requires this "bus" clock to be specified in the DT, add this to R_CCU clock driver and expose it on the DT side with a new number. We do this for both the H6 and H616, but mark it as IGNORE_UNUSED, as we cannot reference it in any H6 DTs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220428230933.15262-2-andre.przywara@arm.com
2022-05-06clk: tegra: Update kerneldoc to match prototypesThierry Reding1-4/+4
For some DFLL functions, the kerneldoc comments don't match the function prototype. Fix them up to avoid some warnings at build time. Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-05-06clk: renesas: r9a09g011: Add eth clock and reset entriesPhil Edworthy1-5/+9
Add ethernet clock/reset entries to CPG driver. Note that the AXI and CHI clocks are both enabled and disabled using the same register bit. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220504145454.71287-2-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-06clk: renesas: Add RZ/V2M support using the rzg2l driverPhil Edworthy5-0/+181
The Renesas RZ/V2M SoC is very similar to RZ/G2L, though it doesn't have any CLK_MON registers. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-11-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: qcom: gcc-msm8976: Add modem resetAdam Skladowski1-0/+1
Add modem reset, it will be needed during modem bringup. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220426073048.11509-4-a39.skl@gmail.com
2022-05-05clk: qcom: gcc-msm8976: Set floor ops for SDCCAdam Skladowski1-3/+3
Just like in case of other SoCs change SDCC1/SDCC2 ops to floor to avoid overclocking controller. This commit only sets SDCC1/SDCC2 which are used for EMMC/SDCARD. Leave SDCC3 because on this platform it's mostly used for WIFI/BT chips, like on Sony Loire familly devices. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220426073048.11509-2-a39.skl@gmail.com
2022-05-05clk: renesas: rzg2l: Add support for RZ/V2M reset monitor regPhil Edworthy2-3/+17
The RZ/V2M doesn't have a matching set of reset monitor regs for each reset reg like the RZ/G2L. Instead, it has a single CPG_RST_MON reg which has a single bit per module. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-10-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Make use of CLK_MON registers optionalPhil Edworthy4-1/+16
The RZ/V2M SoC doesn't use CLK_MON registers, so make them optional. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-9-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Set HIWORD mask for all mux and dividersPhil Edworthy3-31/+19
All of the muxes and dividers that can be modified require the HIWORD flags, so make the macros set them. It won't affect read only muxes and dividers. This will make the clock tables a little easier to read, particularly for new SoCs coming. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-8-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add read only versions of the clk macrosPhil Edworthy3-6/+12
This just makes the clk tables easier to read. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-7-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Move the DEF_MUX array size calc into the macroPhil Edworthy3-22/+19
We only ever use ARRAY_SIZE() to populate the number of parents, so move this into the macro to always detect it automatically. This also makes the tables of clocks a little simpler. Similarly for the DEF_SD_MUX macro. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Link: https://lore.kernel.org/r/20220503115557.53370-6-phil.edworthy@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Fix OSTM1 module clock nameGeert Uytterhoeven1-1/+1
Fix a typo in the name of the "ostm1_pclk" clock. This change has no run-time impact. Fixes: 161450134ae9bab3 ("clk: renesas: r9a07g044: Add OSTM clock and reset entries") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/e0eff1f57378ec29d0d3f1a7bdd7e380583f736b.1651494871.git.geert+renesas@glider.be
2022-05-05clk: renesas: r9a07g043: Add clock and reset entries for ADCBiju Das1-0/+6
Add clock and reset entries for ADC block in CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220501083450.26541-5-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g043: Add TSU clock and reset entryBiju Das1-0/+6
Add TSU clock and reset entry to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220501083450.26541-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g043: Add RSPI clock and reset entriesBiju Das1-0/+9
Add RSPI{0,1,2} clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220501083450.26541-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g043: Add clock and reset entries for SPI Multi I/O Bus ControllerBiju Das1-0/+18
Add clock and reset entries for SPI Multi I/O Bus Controller. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220501083450.26541-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add DSI clock and reset entriesBiju Das1-1/+16
Add DSI clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-10-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add LCDC clock and reset entriesBiju Das1-1/+8
Add LCDC clock and reset entries to CPG driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-9-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add M4 Clock supportBiju Das1-1/+18
Add support for M4 clock which is sourced from pll2_533_div2. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-8-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add M3 Clock supportBiju Das1-1/+4
Add support for M3 clock which is sourced from DSI divider connected to PLL5_4 mux. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-7-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add {M2, M2_DIV2} Clocks supportBiju Das1-1/+4
Add support for {M2, M2_DIV2} clocks which is sourced from pll3_533. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-6-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: r9a07g044: Add M1 clock supportBiju Das1-1/+10
Add support for M1 clock which is sourced from FOUTPOSTDIV. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-5-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add DSI divider clk supportBiju Das2-0/+136
M3 clock is sourced from DSI Divider (DSIDIVA * DSIDIVB) This patch add support for DSI divider clk by combining DSIDIVA and DSIDIVB. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add PLL5_4 clk mux supportBiju Das2-0/+103
Add PLL5_4 clk mux support to select clock from clock sources FOUTPOSTDIV and FOUT1PH0. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-05clk: renesas: rzg2l: Add FOUTPOSTDIV clk supportBiju Das2-0/+235
PLL5 generates FOUTPOSTDIV clk and is sourced by LCDC/DSI modules. The FOUTPOSTDIV is connected to PLL5_4 MUX. Video clock is sourced from DSI divider which is connected to PLL5_4 MUX. This patch adds support for generating FOUTPOSTDIV clk. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220430114156.6260-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2022-05-04clk: tegra: Replace .round_rate() with .determine_rate()Rajkumar Kasirajan1-5/+10
Replace the .round_rate() callback with .determine_rate() which can consider max_rate imposed by clk_set_max_rate() while rounding the clock rate. Note that if the .determine_rate() callback is defined it will be called instead of the .round_rate() callback when calling clk_round_rate(). By using .determine_rate(), the maximum rate returned when calling clk_round_rate() is now limited by the current max_rate. Signed-off-by: Rajkumar Kasirajan <rkasirajan@nvidia.com> [jonathanh@nvidia.com: checkpatch fixes and commit message update] Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-05-04clk: tegra: Register clocks from root to leafTimo Alho1-16/+56
Current clock initialization causes intermediate registering of orphan clocks (i.e. a clock without a parent registered). CCF keeps track of orphan clocks and any time a new clock is registered, it will loop through the list of orphan and queries if the parent is now available. This operation triggers one or more clock operations, which are IPCs with BPMP-FW. Hence, due to the order in which the clocks appear currently, this causes > 5000 IPC messages to be sent to BPMP-FW during clock initialization. Optimize the clock probing by registering clocks hierarchically from root clock towards leafs. Signed-off-by: Timo Alho <talho@nvidia.com> [jonathanh@nvidia.com: checkpatch fixes] Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-05-04clk: tegra: Add missing reset deassertionDiogo Ivo1-0/+12
Commit 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling clocks") removed deassertion of reset lines when enabling peripheral clocks. This breaks the initialization of the DFLL driver which relied on this behaviour. Fix this problem by adding explicit deassert/assert requests to the driver. Tested on Google Pixel C. Cc: stable@vger.kernel.org Fixes: 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling clocks") Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt> Signed-off-by: Thierry Reding <treding@nvidia.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.