aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/crypto/hisilicon/hpre
AgeCommit message (Collapse)AuthorFilesLines
2022-09-16crypto: hisilicon - support get algs by the capability registerZhiqi Song2-10/+83
The value of qm algorithm can change dynamically according to the value of the capability register. Add xxx_set_qm_algs() function to obtain the algs that the hardware device supported from the capability register and set them into usr mode attribute files. Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/hpre - optimize registration of ecdhZhiqi Song1-73/+63
Use table to store the different ecdh curve configuration, making the registration of ecdh clearer and expansion more convenient. Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/hpre - support hpre capabilityZhiqi Song3-38/+157
Read some hpre device configuration info from capability register, instead of fixed macros. Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/qm - get error type from hardware registersWeili Qian1-14/+54
Hardware V3 and later versions support get error type from registers. To be compatible with later hardware versions, get error type from registers instead of fixed marco. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/qm - get qp num and depth from hardware registersWeili Qian1-2/+2
Hardware V3 and later versions can obtain qp num and depth supported by the hardware from registers. To be compatible with later hardware versions, get qp num and depth from registers instead of fixed marcos. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/qm - get hardware features from hardware registersWeili Qian1-2/+2
Before hardware V3, hardwares do not provide the feature registers, driver resolves hardware differences based on the hardware version. As a result, the driver does not support the new hardware. Hardware V3 and later versions support to obtain hardware features, such as power-gating management and doorbell isolation, through the hardware registers. To be compatible with later hardware versions, the features of the current device is obtained by reading the hardware registers instead of the hardware version. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19crypto: hisilicon/hpre - change return type of hpre_cluster_inqry_write()Weili Qian1-6/+2
hpre_cluster_inqry_write() always returns 0. So change the type of hpre_cluster_inqry_write() to void. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-29crypto: hisilicon/hpre - don't use GFP_KERNEL to alloc mem during softirqZhengchao Shao1-1/+1
The hpre encryption driver may be used to encrypt and decrypt packets during the rx softirq, it is not allowed to use GFP_KERNEL. Fixes: c8b4b477079d ("crypto: hisilicon - add HiSilicon HPRE accelerator") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-04-15crypto: hisilicon/hpre - support last word dumpingKai Ye1-20/+112
1. Add some debugging registers. 2. Add last word dumping function during hpre engine controller reset. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-04-15crypto: hisilicon/hpre - support register checkingKai Ye1-18/+72
The value of the register is changed after the task running. A debugfs file node is added to help users to check the change of register values. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-15hisi_acc_vfio_pci: Add helper to retrieve the struct pci_driverShameer Kolothum1-0/+6
struct pci_driver pointer is an input into the pci_iov_get_pf_drvdata(). Introduce helpers to retrieve the ACC PF dev struct pci_driver pointers as we use this in ACC vfio migration driver. Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Acked-by: Kai Ye <yekai13@huawei.com> Acked-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Link: https://lore.kernel.org/r/20220308184902.2242-7-shameerali.kolothum.thodi@huawei.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-03-15hisi_acc_qm: Move VF PCI device IDs to common headerShameer Kolothum1-7/+6
Move the PCI Device IDs of HiSilicon ACC VF devices to a common header and also use a uniform naming convention. This will be useful when we introduce the vfio PCI HiSilicon ACC live migration driver in subsequent patches. Cc: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Acked-by: Longfang Liu <liulongfang@huawei.com> Acked-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h Link: https://lore.kernel.org/r/20220308184902.2242-4-shameerali.kolothum.thodi@huawei.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-03-15crypto: hisilicon/qm: Move the QM header to include/linuxShameer Kolothum1-1/+1
Since we are going to introduce VFIO PCI HiSilicon ACC driver for live migration in subsequent patches, move the ACC QM header file to a common include dir. Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Acked-by: Longfang Liu <liulongfang@huawei.com> Acked-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Link: https://lore.kernel.org/r/20220308184902.2242-2-shameerali.kolothum.thodi@huawei.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-12-17crypto: hisilicon/hpre - fix memory leak in hpre_curve25519_src_init()Weili Qian1-1/+1
hpre_curve25519_src_init() allocates memory for 'ptr' before calling memcmp(). If memcmp() returns 0, the function will return '-EINVAL' without freeing memory. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-11-26crypto: hisilicon - modify the value of engine type rateKai Ye1-1/+1
Modify the value of type rate from new QM spec. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-11-20crypto: hisilicon/hpre - use swap() to make code cleanerYang Guang1-4/+1
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon - support runtime PM for accelerator deviceWeili Qian1-4/+31
Add runtime PM support for Kunpeng930 accelerator device. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon - using 'debugfs_create_file' instead of 'debugfs_create_regset32'Weili Qian1-2/+23
The accelerator devices support runtime PM, when device is in suspended, an exception will occur if reading registers. Therefore, this patch uses 'debugfs_create_file' instead of 'debugfs_create_regset32' to create debugfs file, and then the driver can get the device status before reading the register. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-12crypto: hisilicon - enable hpre device clock gatingWeili Qian1-0/+63
Kunpeng930 hpre device supports dynamic clock gating. When doing tasks, the algorithm core is opened, and when idle, the algorithm core is closed. This patch enables hpre dynamic clock gating by writing hardware registers. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-17crypto: hisilicon/hpre - adds the max shaper type rateKai Ye1-0/+7
The HPRE driver support configure each function's QoS in the Host for Kunpeng930. The HPRE driver needs to configure the maximum shaper type rate. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-03crypto: hisilicon/hpre - register ecdh NIST P384Hui Tang1-4/+52
Register ecdh NIST P384 curve and add the tfm initialization. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-03crypto: hisilicon/hpre - add check before gx modulo pHui Tang1-1/+5
The result of gx modulo p is zero if gx is equal to p, so return error immediately if gx is equal to p. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-03crypto: hisilicon/hpre - fix ecdh self test issueHui Tang1-0/+34
When the key length is zero, use stdrng to generate private key to pass the crypto ecdh-nist-p256 self test on vector 2. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28crypto: hisilicon/qm - support address prefetchingLongfang Liu1-0/+50
Kunpeng930 hardware supports address prefetching to improve performance before doing tasks in SVA scenario. This patch enables this function in device initialization by writing hardware registers. In the process of reset, address prefetching is disabled to avoid the failure of interaction between accelerator device and SMMU. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-23crypto: hisilicon/qm - enable to close master ooo when NFE occursWeili Qian1-12/+24
Kunpeng930 could be able to close master ooo when NFE occurs, which will disable memory accessing from device and execute tasks. This ensures that errors do not spread. This patch enables the hardware to close master ooo when an error occurs by writing hardware registers, and ensures that the driver will not drain qp because the hardware will empty the tasks automatically. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-23crypto: hisilicon/qm - adjust order of device error configurationWeili Qian1-2/+4
In order to avoid reporting an exception but the error type is not configured, the driver needs to configure the error type first, and then enable the error interrupt. Before executing the task, hardware error initialization is needed so that the hardware can detect the error in time. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-21crypto: hisilicon/hpre - add 'default' for switch statementHui Tang1-2/+2
Return error immediately if it goto 'default' path. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-21crypto: hisilicon/hpre - delete rudundant macro definitionHui Tang1-2/+1
Delete rudundant macro definition. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-21crypto: hisilicon/hpre - use 'GENMASK' to generate mask valueHui Tang2-10/+10
Use 'GENMASK' to generate mask value, just make the code clearer. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-21crypto: hisilicon/hpre - delete rudundant initializationHui Tang1-2/+2
Delete rudundant variable initialization. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-21crypto: hisilicon/hpre - remove the macro of 'HPRE_DEV'Hui Tang1-27/+26
Remove complex macro of 'HPRE_DEV' and replace with the initialized device pointer. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-21crypto: hisilicon/hpre - replace macro with inline functionHui Tang1-9/+16
Functional macro lacks type checking, which is not as strict as function call checking. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-21crypto: hisilicon/hpre - init a structure member each lineHui Tang1-14/+42
Only init a structure member each line, just to keep the code neat. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-21crypto: hisilicon/hpre - the macro 'HPRE_ADDR' expandsHui Tang1-28/+27
The macro 'HPRE_ADDR' is unnecessary, so expanding it. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-21crypto: hisilicon/hpre - fix unmapping invalid dma addressHui Tang1-0/+18
Currently, an invalid dma address may be unmapped when calling 'xx_data_clr_all' in error path, so check dma address of sqe in/out if initialized before calling 'dma_free_coherent' or 'dma_unmap_single'. Fixes: a9214b0b6ed2 ("crypto: hisilicon - fix the check on dma address") Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-21crypto: hisilicon/hpre - extend 'cra_driver_name' with curve nameHui Tang1-2/+2
Currently,'cra_driver_name' cannot be used to specify ecdh algorithm with a special curve, so extending it with curve name. Fixes: 6763f5ea2d9a ("crypto: ecdh - move curve_id of ECDH from ...") Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-22crypto: hisilicon - dynamic configuration 'err_info'Weili Qian1-10/+16
'err_info' does not support dynamic configuration since it is const type. Therefore, in order to support new error type later, 'err_info' is changed to dynamic configuration. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-16crypto: hisilicon/hpre - delete redundant log and return in advanceHui Tang1-1/+1
'hpre_cfg_by_dsm' has checked and printed error path internally. It is not necessary to do it here, so remove it. It should return error immediately when return value of 'hpre_cfg_by_dsm' is non-zero, and no need to execute the remaining sentences. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-16crypto: hisilicon/hpre - add debug logHui Tang1-1/+7
When the received sqe is abnormal, the error message in the sqe written back by the hardware is printed to help to analyze the abnormal causes. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-16crypto: hisilicon/hpre - use the correct variable typeHui Tang1-1/+2
The return value of 'le32_to_cpu' is unsigned, so change the variable type from 'int' to 'unsigned int'. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-16crypto: hisilicon/hpre - delete the rudundant space after returnHui Tang2-3/+3
There are two spaces after return, just keep one. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-09crypto: hisilicon/hpre - fix a typo in hpre_crypto.cRuiqi Gong1-1/+1
Do a trivial typo fix. s/discribed/described Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ruiqi Gong <gongruiqi1@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-02crypto: hisilicon/hpre - Add processing of src_data in 'CURVE25519'Meng Yu1-4/+18
HPRE can only deal with src_data smaller than 'p' in 'CURVE25519' algorithm, but 'rfc7748' says: 'Implementations MUST accept non-canonical values and process them as if they had been reduced modulo the field prime' So we get its modulus to p, and then deal it with HPRE. Signed-off-by: Meng Yu <yumeng18@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-02crypto: hisilicon/hpre - delete redundant '\n'Hui Tang1-2/+2
It has newline already by sysfs, so delete redundant '\n' Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-02crypto: hisilicon/hpre - fix a typo and delete redundant blank lineHui Tang1-2/+1
s/shoul/should/ Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-02crypto: hisilicon/hpre - fix PASID setting on kunpeng 920Hui Tang1-25/+18
We must confirm the PASID is disabled before using no-sva mode. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26crypto: hisilicon/qm - move 'CURRENT_QM' code to qm.cWeili Qian2-62/+0
Since the code related to 'CURRENT_QM' debugfs is exactly same in sec/hpre/zip driver, move 'CURRENT_QM' to qm.c to reduce duplicate code. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26crypto: hisilicon/qm - set the total number of queuesWeili Qian1-3/+0
Move the configuration of the total number of queues 'ctrl_qp_num' from sec2/hpre/zip to qm.c. And get the total number of queues from the hardware register for Kunpeng930. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26crypto: hisilicon/hpre - fix "hpre_ctx_init" resource leakHui Tang1-1/+12
When calling "hpre_ctx_set" fails, stop and put qp, otherwise will leak qp resource. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26crypto: hisilicon - fix the check on dma addressHui Tang1-12/+0
System may be able to get physical address of zero if not reserved by firmware. The dma address obtained by 'dma_alloc_coherent' is valid, since already checking cpu va before, so do not check again. Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.