aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/crypto/hisilicon/zip (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-16crypto: hisilicon - support get algs by the capability registerZhiqi Song1-5/+70
The value of qm algorithm can change dynamically according to the value of the capability register. Add xxx_set_qm_algs() function to obtain the algs that the hardware device supported from the capability register and set them into usr mode attribute files. Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com> Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/zip - support zip capabilityWeili Qian3-42/+128
Add function 'hisi_zip_alg_support' to get device configuration information from capability registers, instead of determining whether to register an algorithm based on hardware platform's version. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/qm - get error type from hardware registersWeili Qian1-19/+55
Hardware V3 and later versions support get error type from registers. To be compatible with later hardware versions, get error type from registers instead of fixed marco. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/qm - get qp num and depth from hardware registersWeili Qian2-3/+4
Hardware V3 and later versions can obtain qp num and depth supported by the hardware from registers. To be compatible with later hardware versions, get qp num and depth from registers instead of fixed marcos. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-09-16crypto: hisilicon/qm - get hardware features from hardware registersWeili Qian1-2/+2
Before hardware V3, hardwares do not provide the feature registers, driver resolves hardware differences based on the hardware version. As a result, the driver does not support the new hardware. Hardware V3 and later versions support to obtain hardware features, such as power-gating management and doorbell isolation, through the hardware registers. To be compatible with later hardware versions, the features of the current device is obtained by reading the hardware registers instead of the hardware version. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19crypto: hisilicon/zip - some misc cleanupYang Shen3-19/+23
Some cleanup for code: 1. Change names for easy to understand. 2. Unify the variables type. 3. Use the right return value. Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19crypto: hisilicon/zip - optimization for performanceYang Shen1-14/+13
1.Remove some useless steps during doing requests. 2.Adjust the possibility of branch prediction. Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-08-19crypto: hisilicon/zip - fix mismatch in get/set sgl_sge_nrYe Weihua1-2/+2
KASAN reported this Bug: [17619.659757] BUG: KASAN: global-out-of-bounds in param_get_int+0x34/0x60 [17619.673193] Read of size 4 at addr fffff01332d7ed00 by task read_all/1507958 ... [17619.698934] The buggy address belongs to the variable: [17619.708371] sgl_sge_nr+0x0/0xffffffffffffa300 [hisi_zip] There is a mismatch in hisi_zip when get/set the variable sgl_sge_nr. The type of sgl_sge_nr is u16, and get/set sgl_sge_nr by param_get/set_int. Replacing param_get/set_int to param_get/set_ushort can fix this bug. Fixes: f081fda293ffb ("crypto: hisilicon - add sgl_sge_nr module param for zip") Signed-off-by: Ye Weihua <yeweihua4@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-07-29crypto: hisilicon/zip - Use the bitmap API to allocate bitmapsChristophe JAILLET1-5/+5
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less verbose and it improves the semantic. While at it, add an explicit include <linux/bitmap.h>. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-06-17crypto: hisilicon/qm - move alloc qm->wq to qm.cWeili Qian1-16/+1
Before stopping the function, the driver needs to flush all the remaining work about event irq. Therefore, accelerator drivers use a private workqueue(qm->wq) to handle event irq instead of the system workqueue. This patch moves alloc workqueue from sec_main.c and zip_main.c to qm.c. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-04-21crypto: hisilicon/qm - replace hisi_qm_release_qp() with hisi_qm_free_qps()Weili Qian1-1/+1
hisi_qm_free_qps() can release multiple queues in one call, and it is already exported. So, replace hisi_qm_release_qp() with hisi_qm_free_qps() in zip_crypto.c, and do not export hisi_qm_release_qp() outside qm.c. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-04-15crypto: hisilicon/zip - support last word dumpingKai Ye1-1/+106
1. Add some debugging registers. 2. Add last word dumping function during zip engine controller reset. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-04-15crypto: hisilicon/zip - support register checkingKai Ye1-8/+70
The value of the register is changed after the task running. A debugfs file node is added to help users to check the change of register values. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-03-15hisi_acc_vfio_pci: Add helper to retrieve the struct pci_driverShameer Kolothum1-0/+6
struct pci_driver pointer is an input into the pci_iov_get_pf_drvdata(). Introduce helpers to retrieve the ACC PF dev struct pci_driver pointers as we use this in ACC vfio migration driver. Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Acked-by: Kai Ye <yekai13@huawei.com> Acked-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Link: https://lore.kernel.org/r/20220308184902.2242-7-shameerali.kolothum.thodi@huawei.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-03-15hisi_acc_qm: Move VF PCI device IDs to common headerShameer Kolothum1-6/+5
Move the PCI Device IDs of HiSilicon ACC VF devices to a common header and also use a uniform naming convention. This will be useful when we introduce the vfio PCI HiSilicon ACC live migration driver in subsequent patches. Cc: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Acked-by: Longfang Liu <liulongfang@huawei.com> Acked-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h Link: https://lore.kernel.org/r/20220308184902.2242-4-shameerali.kolothum.thodi@huawei.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2022-03-15crypto: hisilicon/qm: Move the QM header to include/linuxShameer Kolothum1-1/+1
Since we are going to introduce VFIO PCI HiSilicon ACC driver for live migration in subsequent patches, move the ACC QM header file to a common include dir. Acked-by: Zhou Wang <wangzhou1@hisilicon.com> Acked-by: Longfang Liu <liulongfang@huawei.com> Acked-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Link: https://lore.kernel.org/r/20220308184902.2242-2-shameerali.kolothum.thodi@huawei.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-12-24crypto: hisilicon/zip - add new algorithms for uacce deviceYang Shen1-1/+4
Enable deflate/lz77_zstd algorithm for uacce device on Kunpeng930. Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-12-17crypto: hisilicon/zip - enable ssid for sva sglYang Shen1-1/+2
For Kunpeng 920, the bit 0 of register 'HZIP_SGL_RUSER_32_63' stand for whether the ssid is valid. So this bit should be set as valid for sva mode. Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-11-26crypto: hisilicon - modify the value of engine type rateKai Ye1-2/+2
Modify the value of type rate from new QM spec. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-10-01crypto: hisilicon/zip - Fix spelling mistake "COMSUMED" -> "CONSUMED"Colin Ian King1-1/+1
There is a spelling mistake in a literal string. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon - change parameter passing of debugfs functionWeili Qian1-7/+4
To avoid repeatedly obtaining 'qm' from 'filp', parameter passing of debugfs function directly use 'qm' instead of 'filp'. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon - support runtime PM for accelerator deviceWeili Qian1-4/+30
Add runtime PM support for Kunpeng930 accelerator device. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-21crypto: hisilicon - using 'debugfs_create_file' instead of 'debugfs_create_regset32'Weili Qian1-1/+11
The accelerator devices support runtime PM, when device is in suspended, an exception will occur if reading registers. Therefore, this patch uses 'debugfs_create_file' instead of 'debugfs_create_regset32' to create debugfs file, and then the driver can get the device status before reading the register. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-08-12crypto: hisilicon - enable zip device clock gatingWeili Qian1-0/+26
Kunpeng930 zip device supports dynamic clock gating. When executing tasks, the algorithm core is opened, and when idle, the algorithm core is closed. This patch enables zip dynamic clock gating by writing hardware registers. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-06-17crypto: hisilicon/zip - adds the max shaper type rateKai Ye1-0/+11
The ZIP driver support configure each function's QoS in the Host for Kunpeng930. The ZIP driver needs to configure the maximum shaper type rate. Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28crypto: hisilicon/qm - support address prefetchingLongfang Liu1-0/+50
Kunpeng930 hardware supports address prefetching to improve performance before doing tasks in SVA scenario. This patch enables this function in device initialization by writing hardware registers. In the process of reset, address prefetching is disabled to avoid the failure of interaction between accelerator device and SMMU. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-23crypto: hisilicon/qm - enable to close master ooo when NFE occursWeili Qian1-12/+24
Kunpeng930 could be able to close master ooo when NFE occurs, which will disable memory accessing from device and execute tasks. This ensures that errors do not spread. This patch enables the hardware to close master ooo when an error occurs by writing hardware registers, and ensures that the driver will not drain qp because the hardware will empty the tasks automatically. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-23crypto: hisilicon/qm - adjust order of device error configurationWeili Qian1-3/+3
In order to avoid reporting an exception but the error type is not configured, the driver needs to configure the error type first, and then enable the error interrupt. Before executing the task, hardware error initialization is needed so that the hardware can detect the error in time. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-22crypto: hisilicon - support new error types for ZIPWeili Qian1-2/+7
Kunpeng930 ZIP adds 'zip_axi_poison_err' 'zip_sva_err' and 'QM_ACC_DO_TASK_TIMEOUT' hardware error types. This patch enables the error types and configures the error types as NFE. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-22crypto: hisilicon - dynamic configuration 'err_info'Weili Qian1-10/+15
'err_info' does not support dynamic configuration since it is const type. Therefore, in order to support new error type later, 'err_info' is changed to dynamic configuration. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-02crypto: hisilicon/zip - support new 'sqe' type in Kunpeng930Yang Shen2-0/+26
The Kunpeng930 changes some field meanings in 'sqe'. So add a new 'hisi_zip_sqe_ops' to describe the 'sqe' operations. Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-02crypto: hisilicon/zip - initialize operations about 'sqe' in 'acomp_alg.init'Yang Shen1-31/+110
The operations about 'sqe' are different on some hardwares. Add a struct 'hisi_zip_sqe_ops' to describe the operations in a hardware. And choose the 'ops' in 'hisi_zip_acomp_init' according to the hardware. Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-02crypto: hisilicon/zip - add comments for 'hisi_zip_sqe'Yang Shen2-15/+34
Some fields of 'hisi_zip_sqe' are unused, and some fields have misc utilities. So add comments for used fields and make others unnamed. Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-04-02crypto: hisilicon/zip - adjust functions locationYang Shen1-276/+276
This patch changes nothing about functions except location in order to make code logic clearly. This adjustment follows three principles: 1.The called functions are listed in order above the calling functions. 2.The paired functions are next to each other. 3.Logically similar functions are placed in the same area. Here, we use the callback of 'acomp_alg' as the basis for dividing areas. Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26crypto: hisilicon/qm - move 'CURRENT_QM' code to qm.cWeili Qian1-57/+1
Since the code related to 'CURRENT_QM' debugfs is exactly same in sec/hpre/zip driver, move 'CURRENT_QM' to qm.c to reduce duplicate code. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-26crypto: hisilicon/qm - set the total number of queuesWeili Qian1-7/+0
Move the configuration of the total number of queues 'ctrl_qp_num' from sec2/hpre/zip to qm.c. And get the total number of queues from the hardware register for Kunpeng930. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-03-13crypto: hisilicon/hpre - add version adapt to new algorithmsMeng Yu2-4/+4
A new generation of accelerator Kunpeng930 has appeared, and the corresponding driver needs to be updated to support some new algorithms of Kunpeng930. To be compatible with Kunpeng920, we add parameter 'struct hisi_qm *qm' to sec_algs_(un)register to identify the chip's version. Signed-off-by: Meng Yu <yumeng18@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Reviewed-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - do not reset hardware when CE happensWeili Qian1-1/+4
There is no need to reset hardware when Corrected Error(CE) happens. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon/qm - removing driver after resetWeili Qian1-1/+1
Add waiting logic for resetting as removing driver, otherwise call trace will occur due to releasing resource. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-02-10crypto: hisilicon - PASID fixed on Kunpeng 930Weili Qian1-1/+1
Enable PASID by setting 'sqc' and 'cqc' pasid bits per queue in Kunpeng 930. For Kunpeng 920, PASID is effective for all queues once set in SVA scenarios. Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-14crypto: hisilicon - add ZIP device using mode parameterKai Ye1-0/+14
Add 'uacce_mode' parameter for ZIP, which can be set as 0(default) or 1. '0' means ZIP is only registered to kernel crypto, and '1' means it's registered to both kernel crypto and UACCE. Signed-off-by: Kai Ye <yekai13@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20crypto: hisilicon/zip - add a work_queue for zip irqYang Shen1-3/+23
The patch 'irqchip/gic-v3-its: Balance initial LPI affinity across CPUs' set the IRQ to an uncentain CPU. If an IRQ is bound to the CPU used by the thread which is sending request, the throughput will be just half. So allocate a 'work_queue' and set as 'WQ_UNBOUND' to do the back half work on some different CPUS. Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Zaibo Xu <xuzaibo@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-06crypto: hisilicon/qm - modify the return type of debugfs interfaceWeili Qian1-3/+1
Since 'qm_create_debugfs_file' always returns 0, change it as 'void'. Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-02crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'Sihang Chen1-0/+1
The 'qm->curr_qm_qp_num' is not initialized, which will result in failure to write the current_q file. Signed-off-by: Sihang Chen <chensihang1@hisilicon.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-02crypto: hisilicon/zip - fix the return value when device is busyYang Shen1-1/+2
As before, when the ZIP device is too busy to creat a request, it will return '-EBUSY'. But the crypto process think the '-EBUSY' means a successful request and wait for its completion. So replace '-EBUSY' with '-EAGAIN' to show crypto this request is failed. Fixes: 62c455ca853e("crypto: hisilicon - add HiSilicon ZIP...") Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-02crypto: hisilicon/zip - fix zero length input in GZIP decompressZhou Wang1-6/+17
The zero length input will cause a call trace when use GZIP decompress like this: Unable to handle kernel paging request at virtual address ... lr : get_gzip_head_size+0x7c/0xd0 [hisi_zip] Judge the input length and return '-EINVAL' when input is invalid. Fixes: 62c455ca853e("crypto: hisilicon - add HiSilicon ZIP...") Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-10-02crypto: hisilicon/zip - fix the uncleared debug registersHao Fang1-0/+18
ZIP debug registers aren't cleared even if its driver is removed, so add a clearing operation when remove driver. Signed-off-by: Hao Fang <fanghao11@huawei.com> Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-25crypto: hisilicon/qm - fix wrong return type of 'pci_get_drvdata'Yang Shen1-2/+1
The parameter type of 'pci_set_drvdata' is 'struct hisi_qm', so here the return type of 'pci_get_drvdata' should be 'struct hisi_qm' too. Signed-off-by: Yang Shen <shenyang39@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-18crypto: hisilicon - update ZIP module parameter descriptionLongfang Liu1-1/+1
In order to pass kernel CRYPTO test, ZIP module parameter 'pf_q_num' needs to be set as greater than 1. Signed-off-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-09-18crypto: hisilicon/zip - fix some coding stylesYang Shen2-19/+11
1.Unified alignment styles 2.Remove unnecessary goto branch 3.Remove address printf Signed-off-by: Yang Shen <shenyang39@huawei.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.