aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpio (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-10-20gpio: tegra: Convert to immutable irq chipSvyatoslav Ryhel1-16/+44
Update the driver to use an immutable IRQ chip to fix this warning: "not an immutable chip, please consider fixing it!" Preserve per-chip labels by adding an ->irq_print_chip() callback. Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # TF201 T30 Tested-by: Robert Eckelmann <longnoserob@gmail.com> # TF101 T20 Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2022-10-12Merge tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds1-4/+2
Pull interrupt updates from Thomas Gleixner: "Core code: - Provide a generic wrapper which can be utilized in drivers to handle the problem of force threaded demultiplex interrupts on RT enabled kernels. This avoids conditionals and horrible quirks in drivers all over the place - Fix up affected pinctrl and GPIO drivers to make them cleanly RT safe Interrupt drivers: - A new driver for the FSL MU platform specific MSI implementation - Make irqchip_init() available for pure ACPI based systems - Provide a functional DT binding for the Realtek RTL interrupt chip - The usual DT updates and small code improvements all over the place" * tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) irqchip: IMX_MU_MSI should depend on ARCH_MXC irqchip/imx-mu-msi: Fix wrong register offset for 8ulp irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap dt-bindings: irqchip: Describe the IMX MU block as a MSI controller irqchip: Add IMX MU MSI controller driver dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support irqchip/gic-v3: Fix typo in comment dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END platform-msi: Export symbol platform_msi_create_irq_domain() irqchip/realtek-rtl: use parent interrupts dt-bindings: interrupt-controller: realtek,rtl-intc: require parents irqchip/realtek-rtl: use irq_domain_add_linear() irqchip: Make irqchip_init() usable on pure ACPI systems bcma: gpio: Use generic_handle_irq_safe() gpio: mlxbf2: Use generic_handle_irq_safe() platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe() ssb: gpio: Use generic_handle_irq_safe() pinctrl: amd: Use generic_handle_irq_safe() ...
2022-10-11Merge tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds1-0/+7
Pull pin control updates from Linus Walleij: "There is nothing exciting going on, no core changes, just a few drivers and cleanups. New drivers: - Cypress CY8C95x0 chip pin control support, along with an immediate cleanup - Mediatek MT8188 SoC pin control support - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin control support - Qualcomm PM7250, PM8450 - Rockchip RV1126 SoC pin control support Improvements: - Fix some missing pins in the Armada 37xx driver - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP() macro - Fix some GPIO irq_chips to be immutable - Massive Qualcomm device tree binding cleanup, with more to come" * tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits) MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100" pinctrl: Create subdirectory for StarFive drivers dt-bindings: pinctrl: st,stm32: Document interrupt-controller property dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property dt-bindings: pinctrl: st,stm32: Document gpio-line-names pinctrl: st: stop abusing of_get_named_gpio() pinctrl: wpcm450: Correct the fwnode_irq_get() return value check pinctrl: bcm: Remove unused struct bcm6328_pingroup pinctrl: qcom: restrict drivers per ARM/ARM64 pinctrl: bcm: ns: Remove redundant dev_err call gpio: rockchip: request GPIO mux to pinctrl when setting direction pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops pinctrl: cy8c95x0: Drop atomicity on operations on push_pull pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux() pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper pinctrl: stm32: Switch to use dev_err_probe() helper dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings pinctrl: qcom: spmi-gpio: Add compatible for PM7250B ...
2022-10-11Merge tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds3-461/+0
Pull input updates from Dmitry Torokhov: - a new driver for IBM Operational Panel - a new driver for PinePhone keyboards - RT5120 PMIC power key support - various enhancements and support for new models in xpad (Xbox) driver - a new compatible ID for Elan touchscreen driver - rework of adp5588-keys driver to support configuring via device properties (OF, ACPI, etc) instead of platform data, and proper support of optional gpiochip functionality (and removal of gpio-adp5588 driver) - improvements to firmware update handling in Synaptics RMI4 driver - support for double key matrix in mt6779-keypad - support for polled mode in adc-joystick driver - other assorted driver fixes, cleanups and improvements * tag 'input-for-v6.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (90 commits) Input: i8042 - fix refount leak on sparc Input: i8042 - add LoongArch support in i8042-acpipnpio.h Input: i8042 - rename i8042-x86ia64io.h to i8042-acpipnpio.h Input: pinephone-keyboard - support the proxied I2C bus Input: pinephone-keyboard - add PinePhone keyboard driver dt-bindings: input: Add the PinePhone keyboard binding dt-bindings: input: Convert hid-over-i2c to DT schema input: drop empty comment blocks Input: xpad - add X-Box Adaptive Profile button Input: add ABS_PROFILE to uapi and documentation Input: xpad - add X-Box Adaptive XBox button Input: xpad - add X-Box Adaptive support Input: ims-pcu - fix spelling mistake "BOOLTLOADER" -> "BOOTLOADER" Input: ibm-panel - add missing MODULE_DEVICE_TABLE Input: icn8505 - utilize acpi_get_subsystem_id() Input: xpad - decipher xpadone packages with GIP defines Input: xpad - refactor using BIT() macro Input: synaptics-rmi4 - convert to use sysfs_emit() APIs Input: twl4030-pwrbutton - add missing of.h include Input: applespi - replace zero-length array with DECLARE_FLEX_ARRAY() helper ...
2022-10-10Merge tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds2-3/+14
Pull more ACPI updates from Rafael Wysocki: "These fix two issues, in APEI and in the int3472 driver, clean up the ACPI thermal driver, add ACPI support for non-GPE system wakeup events and make the system reboot code use the S5 (system off) state by default. Specifics: - Fix ACPI device object reference counting in (recently updated) skl_int3472_fill_clk_pdata() (Andy Shevchenko). - Fix a memory leak in APEI by avoiding to add a task_work to kernel threads running when an asynchronous error is detected (Shuai Xue). - Add ACPI support for handling system wakeups via GPIO wake capable IRQs in addition to GPEs (Raul E Rangel). - Make the system reboot code put ACPI-enabled systems into the S5 (system off) state which is necessary for some platforms to work as expected (Kai-Heng Feng). - Make the white space usage in the ACPI thermal driver more consistent and drop redundant code from it (Rafael Wysocki)" * tag 'acpi-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: thermal: Drop some redundant code ACPI: thermal: Drop redundant parens from expressions ACPI: thermal: Use white space more consistently platform/x86: int3472: Don't leak reference on error ACPI: APEI: do not add task_work to kernel thread to avoid memory leak PM: ACPI: reboot: Reinstate S5 for reboot kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle i2c: acpi: Use ACPI wake capability bit to set wake_irq ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get
2022-10-10Merge branches 'acpi-apei', 'acpi-wakeup', 'acpi-reboot' and 'acpi-thermal'Rafael J. Wysocki2-3/+14
Merge additional APEI changes, ACPI updates related to device wakeup and system restart and ACPI thermal driver cleanups for 6.1-rc1: - Fix a memory leak in APEI by avoiding to add do not add task_work to kernel threads running when an asynchronous error is detected (Shuai Xue). - Add ACPI support for handling system wakeups via GPIO wake capable IRQs in addition to GPEs (Raul E Rangel). - Make the system reboot code put ACPI-enabled systems into the S5 (system off) state which is necessary for some platforms to work as expected (Kai-Heng Feng). - Make the white space usage in the ACPI thermal driver more consistent and drop redundant code from it (Rafael Wysocki). * acpi-apei: ACPI: APEI: do not add task_work to kernel thread to avoid memory leak * acpi-wakeup: ACPI: PM: Take wake IRQ into consideration when entering suspend-to-idle i2c: acpi: Use ACPI wake capability bit to set wake_irq ACPI: resources: Add wake_capable parameter to acpi_dev_irq_flags gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_get * acpi-reboot: PM: ACPI: reboot: Reinstate S5 for reboot kernel/reboot: Add SYS_OFF_MODE_RESTART_PREPARE mode * acpi-thermal: ACPI: thermal: Drop some redundant code ACPI: thermal: Drop redundant parens from expressions ACPI: thermal: Use white space more consistently
2022-10-08Merge tag 'gpio-updates-for-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds18-266/+550
Pull gpio updates from Bartosz Golaszewski: "We have a single new driver, support for a bunch of new models, improvements in drivers and core gpiolib code as well device-tree bindings changes. Summary: New driver: - IMX System Controller Unit GPIOs GPIO core: - add fdinfo output for the GPIO character device file descriptors (allows user-space to determine which processes own which GPIO lines) - improvements to OF GPIO code - new quirk for Asus UM325UAZ in gpiolib-acpi - new quirk for Freescale SPI in gpiolib-of Driver improvements: - add a new macro that reduces the amount of boilerplate code in ISA drivers and use it in relevant drivers - support two new models in gpio-pca953x - support new model in gpio-f7188x - convert more drivers to use immutable irq chips - other minor tweaks Device-tree bindings: - add DT bindings for gpio-imx-scu - convert Xilinx GPIO bindings to YAML - reference the properties from the SPI peripheral device-tree bindings instead of providing custom ones in the GPIO controller document - add parsing of GPIO hog nodes to the DT bindings for gpio-mpfs-gpio - relax the node name requirements in gpio-stmpe - add new models for gpio-rcar and gpio-pxa95xx - add a new vendor prefix: Diodes (for Diodes, Inc.) Misc: - pulled in the immutable branch from the x86 platform drivers tree including support for a new simatic board that depends on GPIO changes" * tag 'gpio-updates-for-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (36 commits) gpio: tc3589x: Make irqchip immutable gpiolib: cdev: add fdinfo output for line request file descriptors gpio: twl4030: Reorder functions which allows to drop a forward declaraion gpiolib: fix OOB access in quirk callbacks gpiolib: of: factor out conversion from OF flags gpiolib: rework quirk handling in of_find_gpio() gpiolib: of: make Freescale SPI quirk similar to all others gpiolib: of: do not ignore requested index when applying quirks gpio: ws16c48: Ensure number of irq matches number of base gpio: 104-idio-16: Ensure number of irq matches number of base gpio: 104-idi-48: Ensure number of irq matches number of base gpio: 104-dio-48e: Ensure number of irq matches number of base counter: 104-quad-8: Ensure number of irq matches number of base isa: Introduce the module_isa_driver_with_irq helper macro gpio: pca953x: Add support for PCAL6534 gpio: pca953x: Swap if statements to save later complexity gpio: pca953x: Fix pca953x_gpio_set_pull_up_down() dt-bindings: gpio: pca95xx: add entry for pcal6534 and PI4IOE5V6534Q dt-bindings: vendor-prefixes: add Diodes gpio: mt7621: Switch to use platform_get_irq() function ...
2022-10-05Merge tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86Linus Torvalds2-111/+167
Pull x86 platform driver updates from Hans de Goede: - AMD Platform Management Framework (PMF) driver with AMT and QnQF support - AMD PMC: Improved logging for debugging s2idle issues - Big refactor of the ACPI/x86 backlight handling, ensuring that we only register 1 /sys/class/backlight device per LCD panel - Microsoft Surface: - Surface Laptop Go 2 support - Surface Pro 8 HID sensor support - Asus WMI: - Lots of cleanups - Support for TUF RGB keyboard backlight control - Add support for ROG X13 tablet mode - Siemens Simatic: IPC227G and IPC427G support - Toshiba ACPI laptop driver: Fan hwmon and battery ECO mode support - tools/power/x86/intel-speed-select: Various improvements - Various cleanups - Various small bugfixes * tag 'platform-drivers-x86-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (153 commits) platform/x86: use PLATFORM_DEVID_NONE instead of -1 platform/x86/amd: pmc: Dump idle mask during "check" stage instead platform/x86/intel/wmi: thunderbolt: Use dev_groups callback platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks platform/surface: Split memcpy() of struct ssam_event flexible array platform/x86: compal-laptop: Get rid of a few forward declarations platform/x86: intel-uncore-freq: Use sysfs_emit() to instead of scnprintf() platform/x86: dell-smbios-base: Use sysfs_emit() platform/x86/amd/pmf: Remove unused power_delta instances platform/x86/amd/pmf: install notify handler after acpi init Documentation/ABI/testing/sysfs-amd-pmf: Add ABI doc for AMD PMF platform/x86/amd/pmf: Add sysfs to toggle CnQF platform/x86/amd/pmf: Add support for CnQF platform/x86/amd: pmc: Fix build without debugfs platform/x86: hp-wmi: Support touchpad on/off platform/x86: int3472/discrete: Drop a forward declaration platform/x86: toshiba_acpi: change turn_on_panel_on_resume to static platform/x86: wmi: Drop forward declaration of static functions platform/x86: toshiba_acpi: Remove duplicate include platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading ...
2022-10-04Merge tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds5-22/+7
Pull i2c updates from Wolfram Sang: - 'remove' callback converted to return void. Big change with trivial fixes all over the tree. Other subsystems depending on this change have been asked to pull an immutable topic branch for this. - new driver for Microchip PCI1xxxx switch - heavy refactoring of the Mellanox BlueField driver - we prefer async probe in the i801 driver now - the rest is usual driver updates (support for more SoCs, some refactoring, some feature additions) * tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: pci1xxxx: prevent signed integer overflow i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper i2c: i801: Prefer async probe i2c: designware-pci: Use standard pattern for memory allocation i2c: designware-pci: Group AMD NAVI quirk parts together i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED i2c: mlxbf: remove device tree support i2c: mlxbf: support BlueField-3 SoC i2c: cadence: Add standard bus recovery support i2c: mlxbf: add multi slave functionality i2c: mlxbf: support lock mechanism macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change i2c: riic: Use devm_platform_ioremap_resource() i2c: mlxbf: remove IRQF_ONESHOT dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support i2c: tegra: Add GPCDMA support i2c: scmi: Convert to be a platform driver i2c: rk3x: Add rv1126 support ...
2022-10-04gpiolib: acpi: Add wake_capable variants of acpi_dev_gpio_irq_getRaul E Rangel2-3/+14
The ACPI spec defines the SharedAndWake and ExclusiveAndWake share type keywords. This is an indication that the GPIO IRQ can also be used as a wake source. This change exposes the wake_capable bit so drivers can correctly enable wake functionality instead of making an assumption. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-10-04gpio: rockchip: request GPIO mux to pinctrl when setting directionQuentin Schulz1-0/+7
Before the split of gpio and pinctrl sections in their own driver, rockchip_set_mux was called in pinmux_ops.gpio_set_direction for configuring a pin in its GPIO function. This is essential for cases where pinctrl is "bypassed" by gpio consumers otherwise the GPIO function is not configured for the pin and it does not work. Such was the case for the sysfs/libgpiod userspace GPIO handling. Let's call pinctrl_gpio_direction_input/output when setting the direction of a GPIO so that the pinctrl core requests from the rockchip pinctrl driver to put the pin in its GPIO function. Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes") Fixes: 936ee2675eee ("gpio/rockchip: add driver for rockchip gpio") Cc: stable@vger.kernel.org Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20220930132033.4003377-3-foss+kernel@0leil.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2022-10-03gpio: tc3589x: Make irqchip immutableLinus Walleij1-2/+6
This turns the Toshiba tc3589x gpio irqchip immutable. Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-27Merge branch 'master' into i2c/for-mergewindowWolfram Sang8-26/+54
2022-09-26gpiolib: cdev: add fdinfo output for line request file descriptorsBartosz Golaszewski1-0/+18
Add fdinfo output for file descriptors created for user-space line requests in GPIO uAPI v2. The fdinfo file now contains the name of the GPIO chip that is the "parent" of the request as well as offsets of the lines requested. This allows user-space to parse the /proc/$PID/fdinfo entries and deduce the PID of the process that requested a specific line. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by: Kent Gibson <warthog618@gmail.com>
2022-09-26gpio: mvebu: Fix check for pwm support on non-A8K platformsPali Rohár1-9/+6
pwm support incompatible with Armada 80x0/70x0 API is not only in Armada 370, but also in Armada XP, 38x and 39x. So basically every non-A8K platform. Fix check for pwm support appropriately. Fixes: 85b7d8abfec7 ("gpio: mvebu: add pwm support for Armada 8K/7K") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-21gpiolib: cdev: Set lineevent_state::irq after IRQ register successfullyMeng Li1-2/+3
When running gpio test on nxp-ls1028 platform with below command gpiomon --num-events=3 --rising-edge gpiochip1 25 There will be a warning trace as below: Call trace: free_irq+0x204/0x360 lineevent_free+0x64/0x70 gpio_ioctl+0x598/0x6a0 __arm64_sys_ioctl+0xb4/0x100 invoke_syscall+0x5c/0x130 ...... el0t_64_sync+0x1a0/0x1a4 The reason of this issue is that calling request_threaded_irq() function failed, and then lineevent_free() is invoked to release the resource. Since the lineevent_state::irq was already set, so the subsequent invocation of free_irq() would trigger the above warning call trace. To fix this issue, set the lineevent_state::irq after the IRQ register successfully. Fixes: 468242724143 ("gpiolib: cdev: refactor lineevent cleanup into lineevent_free") Cc: stable@vger.kernel.org Signed-off-by: Meng Li <Meng.Li@windriver.com> Reviewed-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-21gpio: tqmx86: fix uninitialized variable girqDongliang Mu1-2/+2
The commit 924610607f19 ("gpio: tpmx86: Move PM device over to irq domain") adds a dereference of girq that may be uninitialized. Fix this by moving irq_domain_set_pm_device into if true branch as suggested by Marc Zyngier. Fixes: 924610607f19 ("gpio: tpmx86: Move PM device over to irq domain") Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-20gpio: ftgpio010: Make irqchip immutableLinus Walleij1-9/+13
This turns the FTGPIO010 irqchip immutable. Tested on the D-Link DIR-685. Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-20gpio: mockup: Fix potential resource leakage when register a chipAndy Shevchenko1-1/+3
If creation of software node fails, the locally allocated string array is left unfreed. Free it on error path. Fixes: 6fda593f3082 ("gpio: mockup: Convert to use software nodes") Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-20gpio: mockup: fix NULL pointer dereference when removing debugfsBartosz Golaszewski1-1/+1
We now remove the device's debugfs entries when unbinding the driver. This now causes a NULL-pointer dereference on module exit because the platform devices are unregistered *after* the global debugfs directory has been recursively removed. Fix it by unregistering the devices first. Fixes: 303e6da99429 ("gpio: mockup: remove gpio debugfs when remove device") Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-20Merge tag 'intel-gpio-v6.1-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-nextBartosz Golaszewski1-4/+34
intel-gpio for v6.1-1 * Add a quirk for Asus UM325UAZ to make GPIO interrupts working
2022-09-20gpio: twl4030: Reorder functions which allows to drop a forward declaraionUwe Kleine-König1-14/+12
There is no cyclic dependency between gpio_twl4030_probe() and gpio_twl4030_remove(), so by moving the latter before the former the forward declaration can be dropped. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-20gpiolib: fix OOB access in quirk callbacksMichael Walle1-0/+1
Commit a2b5e207cade ("gpiolib: rework quirk handling in of_find_gpio()") introduced an array of quirk functions which get iterated over. But a sentinal value is missing. Add it. Fixes: a2b5e207cade ("gpiolib: rework quirk handling in of_find_gpio()") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-19gpio: mlxbf2: Use generic_handle_irq_safe()Sebastian Andrzej Siewior1-4/+2
On PREEMPT_RT enabled kernels the demultiplex interrupt handler is force threaded and runs with interrupts enabled. The invocation of generic_handle_irq() with interrupts enabled triggers a lockdep warning due to a non-irq safe lock acquisition. Instead of disabling interrupts on the driver level, use generic_handle_domain_irq_safe(). [ tglx: Split out from combo patch ] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/YnkfWFzvusFFktSt@linutronix.de
2022-09-16Merge tag 'gpio-fixes-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds3-9/+30
Pull gpio fixes from Bartosz Golaszewski: - fix the level-low interrupt type support in gpio-mpc8xxx - convert another two drivers to using immutable irq chips - MAINTAINERS update * tag 'gpio-fixes-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: mt7621: Make the irqchip immutable gpio: ixp4xx: Make irqchip immutable MAINTAINERS: Update HiSilicon GPIO Driver maintainer gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx
2022-09-16Merge tag 'v6.0-rc5' into i2c/for-mergewindowWolfram Sang8-108/+134
Linux 6.0-rc5
2022-09-16Merge tag 'pinctrl-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds1-2/+2
Pull pin control fixes from Linus Walleij: "Nothing special, just driver fixes: - Fix IRQ wakeup and pins for UFS and SDC2 issues on the Qualcomm SC8180x - Fix the Rockchip driver to support interrupt on both rising and falling edges. - Name the Allwinner A100 R_PIO properly - Fix several issues with the Ocelot interrupts" * tag 'pinctrl-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: ocelot: Fix interrupt controller pinctrl: sunxi: Fix name for A100 R_PIO pinctrl: rockchip: Enhance support for IRQ_TYPE_EDGE_BOTH pinctrl: qcom: sc8180x: Fix wrong pin numbers pinctrl: qcom: sc8180x: Fix gpio_wakeirq_map
2022-09-15gpiolib: of: factor out conversion from OF flagsDmitry Torokhov1-66/+37
There are several places where we need to convert from OF flags to "normal" GPIO_* flags, so let's introduce a helper and use it. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-15gpiolib: rework quirk handling in of_find_gpio()Dmitry Torokhov1-36/+26
Instead of having a string of "if" statements let's put all quirks into an array and iterate over them. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-15gpiolib: of: make Freescale SPI quirk similar to all othersDmitry Torokhov1-8/+4
There is no need for of_find_spi_cs_gpio() to be different from other quirks: the only variant of property actually used in DTS is "gpios" (plural) so we can use of_get_named_gpiod_flags() instead of recursing into of_find_gpio() again. This will allow us consolidate quirk handling down the road. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-15gpiolib: of: do not ignore requested index when applying quirksDmitry Torokhov1-13/+19
We should not ignore index passed into of_find_gpio() when handling quirks. While in practice this change will not have any effect, it will allow consolidate quirk handling. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-15gpio: ws16c48: Ensure number of irq matches number of baseWilliam Breathitt Gray1-2/+3
The ws16c48 module calls devm_request_irq() for each device. If the number of irq passed to the module does not match the number of base, a default value of 0 is passed to devm_request_irq(). IRQ 0 is probably not what the user wants, so utilize the module_isa_driver_with_irq macro to ensure the number of irq matches the number of base. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-15gpio: 104-idio-16: Ensure number of irq matches number of baseWilliam Breathitt Gray1-2/+3
The 104-idio-16 module calls devm_request_irq() for each device. If the number of irq passed to the module does not match the number of base, a default value of 0 is passed to devm_request_irq(). IRQ 0 is probably not what the user wants, so utilize the module_isa_driver_with_irq macro to ensure the number of irq matches the number of base. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-15gpio: 104-idi-48: Ensure number of irq matches number of baseWilliam Breathitt Gray1-2/+3
The 104-idi-48 module calls devm_request_irq() for each device. If the number of irq passed to the module does not match the number of base, a default value of 0 is passed to devm_request_irq(). IRQ 0 is probably not what the user wants, so utilize the module_isa_driver_with_irq macro to ensure the number of irq matches the number of base. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-15gpio: 104-dio-48e: Ensure number of irq matches number of baseWilliam Breathitt Gray1-2/+3
The 104-dio-48e module calls devm_request_irq() for each device. If the number of irq passed to the module does not match the number of base, a default value of 0 is passed to devm_request_irq(). IRQ 0 is probably not what the user wants, so utilize the module_isa_driver_with_irq macro to ensure the number of irq matches the number of base. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-15gpio: pca953x: Add support for PCAL6534Martyn Welch1-19/+117
Add support for the NXP PCAL6534. This device is broadly a 34-bit version of the PCAL6524. However, whilst the registers are broadly what you'd expect for a 34-bit version of the PCAL6524, the spacing of the registers has been compacted. This has the unfortunate effect of breaking the bit shift based mechanism that is employed to work out register locations used by the other chips supported by this driver. To accommodate ths, callback functions have been added to allow alterate implementations of pca953x_recalc_addr() and pca953x_check_register() for the PCAL6534. Datasheet: https://www.nxp.com/docs/en/data-sheet/PCAL6534.pdf Datasheet: https://www.diodes.com/assets/Datasheets/PI4IOE5V6534Q.pdf Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-15gpio: pca953x: Swap if statements to save later complexityMartyn Welch1-16/+15
A later patch in the series adds support for a further chip type that shares some similarity with the PCA953X_TYPE. In order to keep the logic simple, swap over the if and else portions where checks are made against PCA953X_TYPE and instead check for PCA957X_TYPE. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-15gpio: pca953x: Fix pca953x_gpio_set_pull_up_down()Martyn Welch1-3/+5
A previous fix, commit dc87f6dd058a ("gpio: pca953x: Fix pca953x_gpio_set_config"), identified that pinconf_to_config_param() needed to be used to isolate the config_param from the pinconf in pca953x_gpio_set_config(). This fix however did not consider that this would also be needed in pca953x_gpio_set_pull_up_down() to which it passes this config. Perform a similar call in pca953x_gpio_set_pull_up_down() to isolate the configuration parameter there as well, rather than passing it from pca953x_gpio_set_config() as the configuration argument may also be needed in pca953x_gpio_set_pull_up_down() at a later date. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-14gpio: mt7621: Switch to use platform_get_irq() functionSergio Paracuellos1-3/+4
Mt7621 SoC GPIO driver is a platform driver so we can directly use 'platform_get_irq' instead of 'irq_of_parse_and_map'. Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-14gpio: mt7621: Make the irqchip immutableSergio Paracuellos1-6/+15
Commit 6c846d026d49 ("gpio: Don't fiddle with irqchips marked as immutable") added a warning to indicate if the gpiolib is altering the internals of irqchips. Following this change the following warnings are now observed for the mt7621 driver: gpio gpiochip0: (1e000600.gpio-bank0): not an immutable chip, please consider fixing it! gpio gpiochip1: (1e000600.gpio-bank1): not an immutable chip, please consider fixing it! gpio gpiochip2: (1e000600.gpio-bank2): not an immutable chip, please consider fixing it! Fix this by making the irqchip in the mt7621 driver immutable. Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-14gpio: pca953x: introduce support for nxp,pcal6408Nate Drude1-0/+2
The NXP PCAL6408 is the 8-bit version of PCAL6416. Signed-off-by: Nate Drude <nate.d@variscite.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-13gpio: ixp4xx: Make irqchip immutableLinus Walleij1-3/+14
This turns the IXP4xx GPIO irqchip into an immutable irqchip, a bit different from the standard template due to being hierarchical. Tested on the IXP4xx which uses drivers/ata/pata_ixp4xx_cf.c for a rootfs on compact flash with IRQs from this GPIO block to the CF ATA controller. Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-07gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xxPali Rohár1-0/+1
Commit e39d5ef67804 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in mpc512x via falling edge type. Do same for mpc85xx which support was added in commit 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio"). Fixes probing of lm90 hwmon driver on mpc85xx based board which use level interrupt. Without it kernel prints error and refuse lm90 to work: [ 15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8) [ 15.267168] lm90 0-004c: cannot request IRQ 49 [ 15.272708] lm90: probe of 0-004c failed with error -22 Fixes: 345e5c8a1cc3 ("powerpc: Add interrupt support to mpc8xxx_gpio") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-05gpiolib: acpi: Add a quirk for Asus UM325UAZMario Limonciello1-0/+14
Asus UM325UAZ has GPIO 18 programmed as both an interrupt and a wake source, but confirmed with internal team on this design this pin is floating and shouldn't have been programmed. This causes lots of spurious IRQs on the system and horrendous battery life. Add a quirk to ignore attempts to program this pin on this system. Reported-by: Pavel Krc <reg.krn@pkrc.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216208 Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-05gpiolib: acpi: Add support to ignore programming an interruptMario Limonciello1-4/+20
gpiolib-acpi already had support for ignoring a pin for wakeup, but if an OEM configures a floating pin as an interrupt source then stopping it from being a wakeup won't do much good to stop the interrupt storm. Add support for a module parameter and quirk infrastructure to ignore interrupts as well. Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2022-09-04gpio: exar: access MPIO registers on cascaded chipsQingtao Cao1-5/+35
When EXAR xr17v35x chips are cascaded in order to access the MPIO registers (part of the Device Configuration Registers) of the secondary chips, an offset needs to be applied based on the number of primary chip's UART channels. Signed-off-by: Qingtao Cao <qingtao.cao@digi.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-04gpiolib: make fwnode_get_named_gpiod() staticDmitry Torokhov1-66/+66
There are no external users of fwnode_get_named_gpiod() anymore, so let's stop exporting it and mark it as static. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-03gpio: ws16c48: Make irq_chip immutableWilliam Breathitt Gray1-3/+7
Kernel warns about mutable irq_chips: "not an immutable chip, please consider fixing!" Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the new helper functions, and call the appropriate gpiolib functions. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-03gpio: 104-idio-16: Make irq_chip immutableWilliam Breathitt Gray1-7/+11
Kernel warns about mutable irq_chips: "not an immutable chip, please consider fixing!" Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the new helper functions, and call the appropriate gpiolib functions. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-09-03gpio: 104-idi-48: Make irq_chip immutableWilliam Breathitt Gray1-3/+7
Kernel warns about mutable irq_chips: "not an immutable chip, please consider fixing!" Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the new helper functions, and call the appropriate gpiolib functions. Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>