aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc/dcn301
AgeCommit message (Collapse)AuthorFilesLines
2022-10-06drm/amd/display: clean up one inconsistent indentingYang Li1-1/+1
clean up one inconsistent indenting Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2321 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Add debug option for exiting idle optimizations on cursor updatesBrandon Syu1-0/+1
[Description] - Have option to exit idle opt on cursor updates for debug and optimizations purposes Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Brandon Syu<Brandon.Syu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: Removing 2 physPavle Kotarac1-1/+3
[WHY] New dcn301 has 2 less phys Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: rework recent update PHY state commitWenjing Liu1-0/+4
[why] Original change 594b237b9a07 ("drm/amd/display: Add interface to track PHY state") was implemented by assuming stream's dpms off is equivalent to PHY power off. This assumption doesn't hold in following situations: 1. MST multiple stream scenario, where multiple streams are sharing the same PHY output. Toggle dpms off for one of the stream doesn't power off the PHY due to the presence of other streams. 2. enable stream failure scenario, where enable stream fails due to failure of link training. This will cause DPMS off is set to false, while the actual PHY power state is off in certain cases. Due to the problematic assumption, the logic will skip disabling other streams for MST multiple stream scenario, therefore PHY is not actually powered off. [how] 1. Rework this refactor by moving PHY state update down to hardware level, where we update PHY state in place when hardware sequencer is actually changing the power state of the PHY hardware. 2. Reimplement symclk on TX off workaround in place when we are actually calling transmitter control to power off PHY in dcn32. Note the workaround is added due to the lack of proper software interface to set TX while keeping symclk on. We plan to address this interface problem so we can set TX off only without affecting symclk in future dcn versions. Fixes: 594b237b9a07 ("drm/amd/display: Add interface to track PHY state") Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add dc_ctx to link_enc_create() parametersAurabindo Pillai1-0/+1
[Why&How] Preparation to enable run time initialization of register offsets to add dc_context to the link_enc_create callback. This is needed to get the dc_ctx handle where register offset initialization routine is called. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-26drm/amd/display: Move FPU associated DCN30 code to DML folderJasdeep Dhillon1-0/+2
[why & how] As part of the FPU isolation work documented in https://patchwork.freedesktop.org/series/93042/, isolate code that uses FPU in DCN30 to DML, where all FPU code should locate. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Jasdeep Dhillon <jdhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Add pstate verification and recovery for DCN31Nicholas Kazlauskas1-0/+1
[Why] To debug when p-state is being blocked and avoid PMFW hangs when it does occur. [How] Re-use the DCN10 hardware sequencer by adding a new interface for verifying p-state high on the hubbub. The interface is mostly the same as the DCN10 interface, but the bit definitions have changed for the debug bus. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-07drm/amdgpu: move dpcs_3_0_0 headers from dcn to dpcsAlex Deucher1-2/+2
To align with other headers. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Wrap dcn301_calculate_wm_and_dlg for FPU.Bas Nieuwenhuizen1-0/+11
Mirrors the logic for dcn30. Cue lots of WARNs and some kernel panics without this fix. Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-19drm/amd/display: Correct MPC split policy for DCN301Zhan Liu1-1/+1
[Why] DCN301 has seamless boot enabled. With MPC split enabled at the same time, system will hang. [How] Revert MPC split policy back to "MPC_SPLIT_AVOID". Since we have ODM combine enabled on DCN301, pipe split is not necessary here. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: Changed pipe split policy to allow for multi-display pipe splitAngus Wang1-1/+1
[WHY] Current implementation of pipe split policy prevents pipe split with multiple displays connected, which caused the MCLK speed to be stuck at max [HOW] Changed the pipe split policies so that pipe split is allowed for multi-display configurations Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1522 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1709 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1655 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Angus Wang <angus.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-13drm/amd/display: fix function scopesIsabella Basso2-33/+22
This turns previously global functions into static, thus removing compile-time warnings such as: warning: no previous prototype for 'get_highest_allowed_voltage_level' [-Wmissing-prototypes] 742 | unsigned int get_highest_allowed_voltage_level(uint32_t chip_family, uint32_t hw_internal_rev, uint32_t pci_revision_id) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ warning: no previous prototype for 'rv1_vbios_smu_send_msg_with_param' [-Wmissing-prototypes] 102 | int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr, unsigned int msg_id, unsigned int param) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Changes since v1: - As suggested by Rodrigo Siqueira: 1. Rewrite function signatures to make them more readable. 2. Get rid of unused functions in order to remove 'defined but not used' warnings. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Isabella Basso <isabbasso@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-13drm/amd: append missing includesIsabella Basso1-0/+2
This fixes warnings caused by global functions lacking prototypes:, such as: warning: no previous prototype for 'dcn303_hw_sequencer_construct' [-Wmissing-prototypes] 12 | void dcn303_hw_sequencer_construct(struct dc *dc) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... warning: no previous prototype for ‘amdgpu_has_atpx’ [-Wmissing-prototypes] 76 | bool amdgpu_has_atpx(void) { | ^~~~~~~~~~~~~~~ Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Isabella Basso <isabbasso@riseup.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-01drm/amd/display: Enable P010 for DCN3x ASICsStylon Wang1-1/+1
[Why + How] Enable P010 for SDR video applications. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-22drm/amd/display: enable seamless boot for DCN301Zhan Liu1-1/+1
[Why] DCN301 is capable of running seamless boot if keep_stolen_vga_memory is not set. [How] Add a helper to check whether an ASIC can support seamless boot and set it based on base driver flags. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-22drm/amd/display: Fix LTTPR not EnabledAngus Wang1-0/+17
[WHY] Previous LTTPR change has caused a regression that led to an issue where LTTPR is disabled [HOW] Extended changes from previous fix to DCN30X Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Angus Wang <angus.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-17drm/amd/display: remove dmcub_support cap dependencyCharlene Liu1-2/+0
[why] matching the dmcub_support with all other dcn version. Reviewed-by: Sung joon Kim <Sungjoon.Kim@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-28drm/amd/display: move FPU associated DCN301 code to DML folderQingqing Zhuo3-365/+13
[Why & How] As part of the FPU isolation work documented in https://patchwork.freedesktop.org/series/93042/, isolate code that uses FPU in DCN301 to DML, where all FPU code should locate. Cc: Christian König <christian.koenig@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Zhan Liu <Zhan.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-23drm/amd/display: Use adjusted DCN301 watermarksNikola Cornij1-1/+95
[why] If DCN30 watermark calc is used for DCN301, the calculated values are wrong due to the data structure mismatch between DCN30 and DCN301. However, using the original DCN301 watermark values causes underflow. [how] - Add DCN21-style watermark calculations - Adjust DCN301 watermark values to remove the underflow Reviewed-by: Zhan Liu <zhan.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-14drm/amd/display: Fix multiple memory leaks reported by coverityAnson Jacob1-1/+5
coccinelle patch used: @@ expression enc1,vpg,afmt; @@ - if (!enc1 || !vpg || !afmt) + if (!enc1 || !vpg || !afmt) { + kfree(enc1); + kfree(vpg); + kfree(afmt); return NULL; + } Addresses-Coverity-ID: 1466017: ("Resource leaks") Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-18drm/amd/display: Use DCN30 watermark calc for DCN301Zhan Liu1-95/+1
[why] dcn301_calculate_wm_and_dl() causes flickering when external monitor is connected. This issue has been fixed before by commit 0e4c0ae59d7e ("drm/amdgpu/display: drop dcn301_calculate_wm_and_dl for now"), however part of the fix was gone after commit 2cbcb78c9ee5 ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next"). [how] Use dcn30_calculate_wm_and_dlg() instead as in the original fix. Fixes: 2cbcb78c9ee5 ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next") Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Tested-by: Zhan Liu <zhan.liu@amd.com> Tested-by: Oliver Logush <oliver.logush@amd.com> Signed-off-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-21drm/amd/display: log additional register state for debugJosip Pavic1-0/+1
[Why & How] Extend existing state collection functions to add some additional registers useful for debug, and add state collection function for DC hubbub Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08drm/amd/display: Add interface for ADD & DROP PIXEL RegistersWesley Chalmers1-0/+2
[WHY] HW has handed down a new sequence that requires access to these registers. v2: squash in DCN3.1 fixes (Alex) Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08drm/amd/display: Add Interface to set FIFO ERRDET SW OverrideWesley Chalmers1-0/+1
[WHY] HW has handed down a new sequence which requires access to the FIFO ERRDET SW Override register. Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08drm/amd/display: Refactor visual confirmWyatt Wood1-2/+1
[Why + How] Visual confirm has no asic-specific logic, so we can refactor and unify these functions that are currently spread out across multiple dcn files. Add a new hw sequencer interface update_visual_confirm_color, and a new mpc function pointer set_bg_color. This will allow visual confirm to updated independently of MPCC blending updates. v2: squash in DCN3.1 fixes Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-27Revert "drm/amd/display: Refactor and add visual confirm for HW Flip Queue"Qingqing Zhuo1-1/+0
This reverts commit 3ca402375a2197579d1029e7fa9d856847fe0e7b. Recent visual confirm changes are regressing the driver, causing a black screen on boot in some green sardine configs, or visual confirm is not updated at all. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-19drm/amd/display: Fix typo of format termination newlineJoe Perches1-1/+1
/n should be \n Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-19drm/amd/display: Refactor and add visual confirm for HW Flip QueueWyatt Wood1-0/+1
[Why] Visual confirm will indicate if driver is programming the surface address. Refactor is required because much of the visual confirm logic is buried deep in the mpcc files. In addition, visual confirm is not updated during fast updates. [How] In order to have visual confirm for driver flips, visual confirm needs to be updated on every frame, including fast updates. Add a new hw sequencer interface update_visual_confirm_color, and a new mpc function pointer set_bg_color. v2: drop unused variable (Alex) Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-05-19drm/amd/display: Use the correct max downscaling value for DCN3.x familyNikola Cornij1-3/+4
[why] As per spec, DCN3.x can do 6:1 downscaling and DCN2.x can do 4:1. The max downscaling limit value for DCN2.x is 250, which means it's calculated as 1000 / 4 = 250. For DCN3.x this then gives 1000 / 6 = 167. [how] Set maximum downscaling limit to 167 for DCN3.x Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-15drm/amd/display: Connect clock optimization function to dcn301Mikita Lipski1-0/+2
[why/how] Connecting clock optimization functions to dcn301 HWSS to enable power state enter/exit optimization Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Acked-by: Bindu Ramamurthy <bindur12@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Add function and debugfs to dump DCC_EN bitVictor Lu1-1/+2
[why] Currently to view the DCC_EN bit the entire DTN log must be dumped. A compact method to view the DCC_EN bit is desirable. [how] Introduce new debugfs interface that only dumps the DCC_EN bit. Example usage: cat /sys/kernel/debug/dri/0/amdgpu_dm_dcc_en Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: Add dc_debug flag to disable min fclkHarry Wentland1-1/+1
[Why&How] Add debug flag for an option to disable min fclk. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-04-09drm/amd/display: revert max lb lines changeDmytro Laktyushkin1-1/+1
Some hardware revisions do have a max number of lines limitation not honouring which can cause pstate switch underflow. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-26Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-nextDaniel Vetter2-2/+6
amd-drm-next-5.13-2021-03-23: amdgpu: - Debugfs cleanup - Various cleanups and spelling fixes - Flexible array cleanups - Initial AMD Freesync HDMI - Display fixes - 10bpc dithering improvements - Display ASSR support - Clean up and unify powerplay and swsmu interfaces - Vangogh fixes - Add SMU gfx busy queues for RV/PCO - PCIE DPM fixes - S0ix fixes - GPU metrics data fixes - DCN secure display support - Backlight type override - Add initial support for Aldebaran - RAS fixes - Prime fixes for A+A systems - Reset fixes - Initial resource cursor support - Drop legacy IO BAR requirements - Various power fixes amdkfd: - MMU notifier fixes - APU fixes radeon: - Debugfs cleanups - Flexible array cleanups UAPI: - amdgpu: Add a new INFO ioctl interface to query video capabilities rather than hardcoding them in userspace. This allows us to provide fine grained asic capabilities (e.g., if a particular part is bandwidth limited, we can limit the capabilities). Proposed userspace: https://gitlab.freedesktop.org/leoliu/drm/-/commits/info_video_caps https://gitlab.freedesktop.org/leoliu/mesa/-/commits/info_video_caps - amdkfd: bump the driver version. There was a problem with reporting some RAS features on older versions of the driver. Proposed userspace: https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/commit/7cdd63475c36bb9f49bb960f90f9a8cdb7e80a21 Danvet: A bunch of conflicts all over, but it seems to compile ... I did put the call to dc_allow_idle_optimizations() on a single line since it looked a bit too jarring to be left alone. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210324040147.1990338-1-alexander.deucher@amd.com
2021-03-23drm/amd/display: fix dcn3+ bw validation soc param update sequenceDmytro Laktyushkin1-0/+1
SOC needs to be updated to the WM set A values before validation happens. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amd/display: Separate caps for maximum RGB and YUV plane countsAtufa Khan1-0/+2
Not all ASICs have same plane capabilities so need to split them out for proper support handling. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Atufa Khan <Atufa.Khan@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amd/display: use max lb for latency hidingDmytro Laktyushkin1-1/+1
Enable max memory lb config to improve stutter efficiency and latency hiding. Also increase max number of lb lines to be used by dml since experiments have shown that there isnt a hard max beyond what fits in lb. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amdgpu/display: drop dcn301_calculate_wm_and_dl for nowcharles sun1-95/+3
[why] the dcn301_calculate_wm_and_dl() calculation exposed a issue - switch to dcn30 version for now. still need to follow up with dcn301 watermark updates version. v2: squash in warning fix Signed-off-by: Charles Sun <charles.sun@amd.com> Reviewed-by: Nikola Cornij <nikola.cornij@amd.com> Acked-by: Charles Sun <charles.sun@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-23drm/amdgpu/display: Use wm_table.entries for dcn301 calculate_wmZhan Liu1-1/+95
[Why] For DGPU Navi, the wm_table.nv_entries are used. These entires are not populated for DCN301 Vangogh APU, but instead wm_table.entries are. [How] Use DCN21 Renoir style wm calculations. Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-03-10drm/amdgpu/display: Use wm_table.entries for dcn301 calculate_wmZhan Liu1-1/+95
[Why] For DGPU Navi, the wm_table.nv_entries are used. These entires are not populated for DCN301 Vangogh APU, but instead wm_table.entries are. [How] Use DCN21 Renoir style wm calculations. Signed-off-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-18drm/amd/display: Old sequence for HUBP blankAurabindo Pillai1-1/+0
New proposed sequence for HUBP blanking causes regressions where the hardware would fail to enter blank which triggers an assert in the new sequence. This change brings back the old sequence. Fixes: 985faf2c4ecb60 ("drm/amd/display: New sequence for HUBP blank") Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-02-02drm/amd/display: Drop SOC bounding box hookup in DM/DCNicholas Kazlauskas1-105/+2
[Why] There aren't any ASIC where we use these binaries and they aren't useful for future use since it's inconvenient to extend and maintain these structures. [How] Drop the support from DM and DC for now. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Acked-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-25amdgpu: fix clang build warningArnd Bergmann1-1/+2
clang warns about the -mhard-float command line arguments on architectures that do not support this: clang: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument] Move this into the gcc-specific arguments. Fixes: e77165bf7b02 ("drm/amd/display: Add DCN3 blocks to Makefile") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-13drm/amd/display: Add a missing DCN3.01 API mappingNikola Cornij1-0/+1
[why] Required for DSC MST Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Zhan Liu <Zhan.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-13drm/amd/display: New sequence for HUBP blankWesley Chalmers1-0/+1
[WHY] DCN30 has a bug where blanking HUBP blocks pstate allow unless HUBP_DISABLE is toggled afterwards. [HOW] Create a HW sequence for blanking HUBP. 1. Wait for enter VBLANK 2. Set HUBP_BLANK 3. Make sure HUBP_IN_BLANK = 1 4. Toggle HUBP_DISABLE on and off to perform soft reset All existing calls to hubp->funcs->set_blank should be replaced with this new sequence. In wait_for_mpcc_disconnect, only blank the pipe being disconnected, and leave all other pipes unmodified. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-05drm/amdgpu/display: drop DCN support for aarch64Alex Deucher1-4/+0
From Ard: "Simply disabling -mgeneral-regs-only left and right is risky, given that the standard AArch64 ABI permits the use of FP/SIMD registers anywhere, and GCC is known to use SIMD registers for spilling, and may invent other uses of the FP/SIMD register file that have nothing to do with the floating point code in question. Note that putting kernel_neon_begin() and kernel_neon_end() around the code that does use FP is not sufficient here, the problem is in all the other code that may be emitted with references to SIMD registers in it. So the only way to do this properly is to put all floating point code in a separate compilation unit, and only compile that unit with -mgeneral-regs-only." Disable support until the code can be properly refactored to support this properly on aarch64. Acked-by: Will Deacon <will@kernel.org> Reported-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01drm/amd/display: Properly define DPCS related info for DCN301Zhan Liu1-2/+9
[Why] DPCS related info needs to be properly defined within code. [How] Add missing DPCS related info to code. Signed-off-by: Zhan Liu <zhan.liu@amd.com> Reviewed-by: Nikola Cornij <nikola.cornij@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-24drm/amd/display: init soc bounding box for dcn3.01.Yongqiang Sun1-57/+57
[Why & How] Update init soc bounding box and bw bounding box for DCN3.01. Remove pp smu interface which isn't used. v2: squash in removal of stable function definition (Alex) Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-24drm/amd/display: enable pipe power gating by defaultSung Joon Kim1-4/+4
[why] ASIC requirement. [how] Make disable_*_power_gate to false. Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-24drm/amd/display: Enable stutter for dcn3.01.Yongqiang Sun1-1/+0
[Why & How] Enable stutter for DCN3.01. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2026 Jason A. Donenfeld. All Rights Reverse Engineered.