aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc/dcn30 (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-10-10drm/amd/display: Use set_vtotal_min_max to configure OTG VTOTALRodrigo Siqueira1-1/+1
In multiple parts of the DCN code, we write directly to the OTG_V_TOTAL_* registers in some OPTC functions. Let's avoid it by using the set_vtotal_min_max. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: Use the same cursor info across featuresMax Tseng1-0/+4
Since different features would need to update cursor registers, However, they would use different approaches. To unify varied methods, this refactor is implemented the same update cursor info method for current varied features. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Max Tseng <Max.Tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Remove OPTC lock checkRodrigo Siqueira1-1/+0
At some point, we decided to blank HUBP during pixel data blank, and to handle that, we added some OPTC lock checks. Later, we realized that this change caused multiple regression, and we removed it. Nevertheless, we still have some leftovers that might affect some ASIC behavior, and this commit drops those changes to keep the code consistent. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: add dummy pstate workaround to dcn315Dmytro Laktyushkin1-0/+4
DCN315 has to always allow pstate change or SMU will hang. This workaround achieves this by applying a low pstate change latency to be used when pstate is calculated to be unsupported. This lower latency only accounts for memory retraining; a previous change handles locking in the highest available pstate allowing us to minimize required latency hiding to only account for memory retraining. Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: Add debug option for exiting idle optimizations on cursor updatesBrandon Syu1-1/+2
[Description] - Have option to exit idle opt on cursor updates for debug and optimizations purposes Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Brandon Syu<Brandon.Syu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: do not compare integers of different widthsJosip Pavic1-1/+1
[Why & How] Increase width of some variables to avoid comparing integers of different widths Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: Disable SubVP on driver disableAlvin Lee1-1/+20
[Why and How] - For driver disable cases in current implementation, if P-State is unsupported or still supported by firmware, we force it supported by DCN. - SubVP now needs to be included in this case along with FPO. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: rework recent update PHY state commitWenjing Liu1-0/+4
[why] Original change 594b237b9a07 ("drm/amd/display: Add interface to track PHY state") was implemented by assuming stream's dpms off is equivalent to PHY power off. This assumption doesn't hold in following situations: 1. MST multiple stream scenario, where multiple streams are sharing the same PHY output. Toggle dpms off for one of the stream doesn't power off the PHY due to the presence of other streams. 2. enable stream failure scenario, where enable stream fails due to failure of link training. This will cause DPMS off is set to false, while the actual PHY power state is off in certain cases. Due to the problematic assumption, the logic will skip disabling other streams for MST multiple stream scenario, therefore PHY is not actually powered off. [how] 1. Rework this refactor by moving PHY state update down to hardware level, where we update PHY state in place when hardware sequencer is actually changing the power state of the PHY hardware. 2. Reimplement symclk on TX off workaround in place when we are actually calling transmitter control to power off PHY in dcn32. Note the workaround is added due to the lack of proper software interface to set TX while keeping symclk on. We plan to address this interface problem so we can set TX off only without affecting symclk in future dcn versions. Fixes: 594b237b9a07 ("drm/amd/display: Add interface to track PHY state") Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-14drm/amd/display: make some functions staticJiapeng Chong1-2/+2
These functions are not used outside the file dcn30_resource.c, so the modification is defined as static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1949:6: warning: no previous prototype for ‘is_refresh_rate_support_mclk_switch_using_fw_based_vblank_stretch’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1919:5: warning: no previous prototype for ‘get_frame_rate_at_max_stretch_100hz’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2143 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amd/display: update header filesCharlene Liu1-8/+0
[why] update header files, and remove not used register access marco Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: reverted limiting vscsdp_for_colorimetry and ARGB16161616 pixel format additionEthan Wellenreiter1-2/+0
[WHY] Limiting vscsdp_for_colorimetry for YCbCr420/BT2020 resulted in red/green point failures in HDR10 DTN tests. The re-implementation of ARGB16161616 was to fix this however it did not actually fix this issue but a side effect of the issue. [HOW] Change ARGB16161616 pixel format to 26. Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-10drm/amd/display: For stereo keep "FLIP_ANY_FRAME"Alvin Lee1-1/+1
[Description] Observed in stereomode that programming FLIP_LEFT_EYE can cause hangs. Keep FLIP_ANY_FRAME in stereo mode so the surface flip can take place before left or right eye Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-29drm/amd/display: Fix a compilation failure on PowerPC caused by FPU codeRodrigo Siqueira2-11/+0
We got a report from Stephen/Michael that the PowerPC build was failing with the following error: ld: drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o uses soft float ld: failed to merge target specific data of file drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o This error happened because of the function optc3_set_vrr_m_const. This function expects a double as a parameter in a code that is not allowed to have FPU operations. After further investigation, it became clear that optc3_set_vrr_m_const was never invoked, so we can safely drop this function and fix the ld issue. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Melissa Wen <mwen@igalia.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-28drm/amd/display: Clean up some inconsistent indentingJiapeng Chong1-5/+2
No functional modification involved. smatch warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_optc.c:186 optc3_set_dsc_config() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-28drm/amd/display: Clean up some inconsistent indentingJiapeng Chong1-35/+35
No functional modification involved. smatch warnings: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_mpc.c:116 mpc3_get_ogam_current() warn: inconsistent indenting. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_mpc.c:445 mpc3_get_shaper_current() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-28drm/amd/display: Clean up some inconsistent indentingJiapeng Chong1-39/+38
No functional modification involved. smatch warnings: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp.c:724 dpp3_get_blndgam_current() warn: inconsistent indenting. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp.c:823 dpp3_get_shaper_current() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-28drm/amd/display: Clean up some inconsistent indentingJiapeng Chong1-14/+11
No functional modification involved. smatch warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp_cm.c:67 dpp30_get_gamcor_current() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add reinstate dram in the FPO logicRodrigo Siqueira1-0/+3
In order to handle FPO correctly, we need to reinstate the dram values. This function adds the required code to handle the vblank stretch and the dram calculation. Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add dc_ctx to link_enc_create() parametersAurabindo Pillai1-0/+1
[Why&How] Preparation to enable run time initialization of register offsets to add dc_context to the link_enc_create callback. This is needed to get the dc_ctx handle where register offset initialization routine is called. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Remove FPU flags from DCN30 MakefileRodrigo Siqueira1-30/+0
At this stage, we must have all the FPU code for DCN30 isolated in the DML folder. Drop FPU flags from Makefile. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Create patch bounding box function for isolate FPURodrigo Siqueira1-17/+2
In the DCN30 resource, we have a small patch to the bounding box struct; this patch uses FPU operations. This commit moves that specific part to its function under the DML folder. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Move mclk calculation function to DMLRodrigo Siqueira1-38/+0
The function responsible for calculating the MCLK switching has FPU operations. This commit moves it to the dcn30_fpu file. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-13drm/amd/display: Re-implementing ARGB16161616 pixel format as 22Ethan Wellenreiter1-0/+2
[Why] ABGR16161616 colour format was added to dcn10/20/30, and set any ARGB16161616 to the same value as it (26). As such, the HDR10 Green Point y value was too far off of the EDID stated value for DisplayPort. [How] Added back the pixel format as 22 for ARGB16161616 for dcn10/20/30. Reviewed-by: Reza Amini <reza.amini@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Ethan Wellenreiter <Ethan.Wellenreiter@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-07drm/amd/display: make get_refresh_rate() staticAlex Deucher1-1/+1
It's not used outside of dcn30_resource.c. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: rename hdmi_frl_pcon_supportHamza Mahfooz1-1/+1
hdmi_frl_pcon_support has been the source of confusion. So, rename it to dp_hdmi21_pcon_support. Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Program ACP related registerAlan Liu2-5/+5
- Setup the shift and mask of HDMI_ACP_SEND register - Program the register in hdmi stream encoder - Also update ACP register in azalia configuration Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Add basic infrastructure for enabling FAMSRodrigo Siqueira2-6/+186
We want to enable Firmware Assisted Memory (FAMS) Switching, but first, we need to add the required code infrastructure in DC before allowing it in amdgpu_dm. Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Make OPTC3 function accessible to other DCNAlvin Lee1-0/+5
[Why] Newer DCN should use optc3 [How] Declare optc3 vmin/vmax function in header. Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Prepare for new interfacesMartin Leung1-1/+105
[WHY]: Lut pipeline will be hooked up differently in some asics need to add new interfaces and missing registers. [HOW]: Add missing registers and hook up programming from DPP for pre-blend lut. Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21amd/display/dc: Fix COLOR_ENCODING and COLOR_RANGE doing nothing for DCN20+Joshua Ashton1-0/+3
For DCN20 and above, the code that actually hooks up the provided input_color_space got lost at some point. Fixes COLOR_ENCODING and COLOR_RANGE doing nothing on DCN20+. Tested using Steam Remote Play Together + gamescope. Update other DCNs the same wasy DCN1.x was updates in commit a1e07ba89d49 ("drm/amd/display: Use plane->color_space for dpp if specified") Fixes: a1e07ba89d49 ("drm/amd/display: Use plane->color_space for dpp if specified") Signed-off-by: Joshua Ashton <joshua@froggi.es> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-14drm/amdgpu/display: make FP handling in Makefiles consistentAlex Deucher1-4/+2
Use the same pattern as the DML Makefile and while we are here add a missing x86 guard around the msse flags for DCN3.2.x. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-14drm/amd/display: Adding VTEM to dcAhmad Othman1-0/+1
[Why] Video Timing Extended Metadata packet (VTEM) is required for features like VRR and FVA [How] Adding support for VTEM transmission to stream encoders in DCN20 and DCN30 as part of FVA support Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Ahmad Othman <ahmad.othman@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-14drm/amd/display: Firmware assisted MCLK switch and FSFelipe Clark5-15/+28
[WHY] Memory clock switching has great potential for power savings. [HOW] The driver code was modified to notify the DMCUB firmware that it should stretch the vertical blank of frames when a memory clock switch is about to start so that no blackouts happen on the screen due to unavailability of the frame buffer. The driver logic to determine when such firmware assisted strategy can be initiated is also implemented and consists on checking prerequisites of the feature. Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Felipe Clark <felipe.clark@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: update GSP1 generic info packet for PSRSUDavid Zhang1-0/+15
[why & how] Based on PSRSU specification, every selective update frame need to use two SDP to indicate the frame active range. So we occupy another GSP1 for PSRSU execution. Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: update disp pattern generator routine for DCN30Aurabindo Pillai1-31/+2
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add dependant changes for DCN32/321Aurabindo Pillai7-19/+226
[Why&How] This patch adds necessary changes needed in DC files outside DCN32/321 specific tree v2: squash in updates (Alex) Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-26drm/amd/display: Move FPU associated DCN30 code to DML folderJasdeep Dhillon3-476/+55
[why & how] As part of the FPU isolation work documented in https://patchwork.freedesktop.org/series/93042/, isolate code that uses FPU in DCN30 to DML, where all FPU code should locate. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Jasdeep Dhillon <jdhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amd/display: Remove outdated register for dcn3+Tse, Kaitlyn1-5/+0
[Why & How] Remove MPCC_OGAM_LUT_RAM_CONTROL register which is outdated. Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Reviewed-by: Martin Leung <Martin.Leung@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Tse Kaitlyn <Kaitlyn.Tse@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amd/display: Make OPTC3 function accessible to other DCNLee, Alvin1-1/+1
[Why] Newer DCN should use optc3 [How] Declare optc3 vmin/vmax function in header. Reviewed-by: Harry Vanzylldejong <Harry.Vanzylldejong@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amd/display: Add Audio readback registersIlya Bakoulin1-0/+4
[Why] Can be useful for verifying the correctness of audio output. Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-12drm/amd/display: add DCN30 support FEC initJingwen Zhu1-1/+5
[Why] FEC init used on DCN30. [How] Check fec active when HW init. Co-authored-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-05drm/amd/display: Enable 3 plane for DCN 3.0 and 3.02Krunoslav Kovac1-3/+3
[WHY&HOW] Increase num of bottom planes to 2. Note that DCN 3.03 is left out since it has max 2 planes. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-31drm/amd/display: Enable power gating before init_pipesRoman Li1-2/+3
[Why] In init_hw() we call init_pipes() before enabling power gating. init_pipes() tries to power gate dsc but it may fail because required force-ons are not released yet. As a result with dsc config the following errors observed on resume: "REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control" [How] Move enable_power_gating_plane() before init_pipes() in init_hw() Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Roman Li <Roman.Li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Add pstate verification and recovery for DCN31Nicholas Kazlauskas1-0/+1
[Why] To debug when p-state is being blocked and avoid PMFW hangs when it does occur. [How] Re-use the DCN10 hardware sequencer by adding a new interface for verifying p-state high on the hubbub. The interface is mostly the same as the DCN10 interface, but the bit definitions have changed for the debug bus. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: move FPU-related code from dcn20 to dml folderMelissa Wen1-0/+7
Move parts of dcn20 code that uses FPU to dml folder. It aims to isolate FPU operations as described by series: drm/amd/display: Introduce FPU directory inside DC https://patchwork.freedesktop.org/series/93042/ This patch moves the following functions from dcn20_resource to dml/dcn20_fpu and calls of public functions in dcn20_resource are wrapped by DC_FP_START/END(): - void dcn20_populate_dml_writeback_from_context - static bool is_dtbclk_required() - static enum dcn_zstate_support_state() - void dcn20_calculate_dlg_params() - static void swizzle_to_dml_params() - int dcn20_populate_dml_pipes_from_context() - void dcn20_calculate_wm() - void dcn20_cap_soc_clocks() - void dcn20_update_bounding_box() - void dcn20_patch_bounding_box() - bool dcn20_validate_bandwidth_fp() This movement also affects dcn21/30/31, as dcn20_calculate_dlg_params() is used by them. For this reason, I included dcn20_fpu headers in dcn20_resource headers to make dcn20_calculate_dlg_params() visible to dcn21/30/31. Three new functions are created to isolate well-delimited FPU operations: - void dcn20_fpu_set_wb_arb_params(): set cli_watermark, pstate_watermark and time_per_pixel from wb_arb_params (struct mcif_arb_params), since those uses FPU operations on double types: WritebackUrgentWatermark, WritebackDRAMClockChangeWatermark, '16.0'. - void dcn20_fpu_set_wm_ranges(): set min_fill_clk_mhz and max_fill_clk_mhz involves FPU calcs on dram_speed_mts (double type); - void dcn20_fpu_adjust_dppclk(): adjust operation on RequiredDPPCLK that is a double. Signed-off-by: Melissa Wen <mwen@igalia.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: add gamut coefficient set A and BJingwen Zhu1-1/+1
[Why] Screen shake on DCN3 night light SDR BR3. [How] Change the logic to use double buffer reisgter on gamut settings. Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Jingwen Zhu <jingwen.zhu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-07drm/amdgpu: move dpcs_3_0_0 headers from dcn to dpcsAlex Deucher1-2/+2
To align with other headers. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: revert "Reset fifo after enable otg"Zhan Liu1-2/+0
[Why] This change causes regression, that prevents some systems from lighting up internal displays. [How] Revert this patch until a new solution is ready. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Fix FP start/end for dcn30_internal_validate_bw.Bas Nieuwenhuizen1-2/+2
It calls populate_dml_pipes which uses doubles to initialize the scale_ratio_depth params. Mirrors the dcn20 logic. Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Remove unnecessary function definitionAric Cyr3-9/+1
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.