aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc/inc/hw (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-10-11drm/amd/display: add a license to cursor_reg_cache.hAlex Deucher1-0/+1
It's MIT. Fixes: b73353f7f3d434 ("drm/amd/display: Use the same cursor info across features") Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: Use the same cursor info across featuresMax Tseng3-0/+107
Since different features would need to update cursor registers, However, they would use different approaches. To unify varied methods, this refactor is implemented the same update cursor info method for current varied features. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Max Tseng <Max.Tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-10drm/amd/display: Acquire FCLK DPM levels on DCN32Dillon Varone1-1/+14
[Why & How] Acquire FCLK DPM levels to properly construct DML clock limits. Further add new logic to keep number of indices for each clock in clk_mgr. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Dillon Varone <Dillon.Varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-10-06drm/amd/display: Remove OPTC lock checkRodrigo Siqueira1-1/+0
At some point, we decided to blank HUBP during pixel data blank, and to handle that, we added some OPTC lock checks. Later, we realized that this change caused multiple regression, and we removed it. Nevertheless, we still have some leftovers that might affect some ASIC behavior, and this commit drops those changes to keep the code consistent. Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-29drm/amd/display: fill in clock values when DPM is not enabledSamson Tam1-0/+2
[Why] For individual feature testing, PMFW may not report all clock values back. Driver will default them to 0 but this will cause the BB table to be skipped and default to one state with max clocks. [How] Add helper function to scan through initial clock values and populate them with default clock limits so that BB table can be built. Add dpm_enabled flag to check when DPM is not enabled and to trigger helper function. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by: Samson Tam <samson.tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-19drm/amd/display: rework recent update PHY state commitWenjing Liu1-4/+12
[why] Original change 594b237b9a07 ("drm/amd/display: Add interface to track PHY state") was implemented by assuming stream's dpms off is equivalent to PHY power off. This assumption doesn't hold in following situations: 1. MST multiple stream scenario, where multiple streams are sharing the same PHY output. Toggle dpms off for one of the stream doesn't power off the PHY due to the presence of other streams. 2. enable stream failure scenario, where enable stream fails due to failure of link training. This will cause DPMS off is set to false, while the actual PHY power state is off in certain cases. Due to the problematic assumption, the logic will skip disabling other streams for MST multiple stream scenario, therefore PHY is not actually powered off. [how] 1. Rework this refactor by moving PHY state update down to hardware level, where we update PHY state in place when hardware sequencer is actually changing the power state of the PHY hardware. 2. Reimplement symclk on TX off workaround in place when we are actually calling transmitter control to power off PHY in dcn32. Note the workaround is added due to the lack of proper software interface to set TX while keeping symclk on. We plan to address this interface problem so we can set TX off only without affecting symclk in future dcn versions. Fixes: 594b237b9a07 ("drm/amd/display: Add interface to track PHY state") Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-13drm/amd/display: Correct dram channel width for dcn314Duncan Ma1-0/+1
[Why] The interpretation of the number of memory channels differ by memory type, and this affects channel width for the DML input. [How] Set dram channel width according to memory type for dcn314. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-25drm/amd/display: Add interface to track PHY stateAlvin Lee1-0/+6
[Why] Sometimes pixel clock needs to remain active after transmitter disable. [How] Use update_phy_state to track PHY state after stream enable/disable and program pixel clock as needed. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: add doc entries for MPC blending configurationMelissa Wen1-14/+77
Describe structs and enums used to set blend mode properties to MPC blocks. Some pieces of information are already available as code comments, and were just formatted. Others were collected and summarised from discussions on AMD issue tracker[1][2]. [1] https://gitlab.freedesktop.org/drm/amd/-/issues/1734 [2] https://gitlab.freedesktop.org/drm/amd/-/issues/1769 v2: - fix typos (Tales) - add MPCC to MPC entry in the glossary Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Tales Aparecida <tales.aparecida@gmail.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-08-16drm/amd/display: Add basic kernel doc to CRC code under DCRodrigo Siqueira1-3/+11
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-29drm/amd/display: Fix a compilation failure on PowerPC caused by FPU codeRodrigo Siqueira1-2/+0
We got a report from Stephen/Michael that the PowerPC build was failing with the following error: ld: drivers/gpu/drm/amd/display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o uses soft float ld: failed to merge target specific data of file drivers/gpu/drm/amd/display/dc/dcn30/dcn30_optc.o This error happened because of the function optc3_set_vrr_m_const. This function expects a double as a parameter in a code that is not allowed to have FPU operations. After further investigation, it became clear that optc3_set_vrr_m_const was never invoked, so we can safely drop this function and fix the ld issue. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Melissa Wen <mwen@igalia.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Michael Ellerman <mpe@ellerman.id.au> Tested-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Cache cursor when cursor exceeds 64x64Chris Park1-1/+1
[Why] When Static screen from MALL, the cursor needs to be cached if cursor exceeds 64x64 size. [How] Program the bit that cache cursor in MALL when size of the cursor exceeds 64x64. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Fix dpstreamclk programmingMichael Strauss1-1/+2
[WHY] Currently programming incorrect hpo inst as well as selecting incorrect source [HOW] Use hpo inst instead of otg inst to select dpstreamclk inst Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add enable/disable FIFO callbacks to stream setupNicholas Kazlauskas1-0/+2
[Why] We don't write out attributes after disabling and re-enabling the link on some monitors, causing some, but not all, HDMI displays to fail to lightup on DCN314. [How] Firmware used to do this after DIG link setup. Since firmware is no longer doing this to support USB4 and dynamic link remapping we'll need to add this to driver in the equivalent paths. New optional callbacks were created in the stream encoder interface and implementations were added for DCN314. Reviewed-by: Michael Strauss <Michael.Strauss@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Program ACP related registerAlan Liu1-0/+1
- Setup the shift and mask of HDMI_ACP_SEND register - Program the register in hdmi stream encoder - Also update ACP register in azalia configuration Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alan Liu <HaoPing.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-30drm/amd/display: Fix __floatunsidf undefined for 32 bit compilationRodrigo Siqueira1-1/+1
When we tried to compile DCN32/321 for 32-bit architecture, we got this error message: ERROR: modpost: "__floatunsidf" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! This was caused because we were trying to assign an unsigned int to a double value which causes issues for 32-bit architecture. This issue can be fixed by changing the value type. Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Randy Dunlap <rdunlap@infradead.org> Fixes: 265280b99822 ("drm/amd/display: add CLKMGR changes for DCN32/321") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-21drm/amd/display: Get VCO frequency from registersRodrigo Siqueira1-0/+3
Add support to get VCO frequency from registers. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-14drm/amd/display: Adding VTEM to dcAhmad Othman1-0/+1
[Why] Video Timing Extended Metadata packet (VTEM) is required for features like VRR and FVA [How] Adding support for VTEM transmission to stream encoders in DCN20 and DCN30 as part of FVA support Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Ahmad Othman <ahmad.othman@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-14drm/amd/display: Drop unused privacy_mask setters and gettersOliver Logush1-6/+0
[Why and How] dwbc_funcs.set/get_privacy_mask isn't being used anymore, drop it Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Oliver Logush <oliver.logush@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-07drm/amd/display: Add PSR-SU-RC support in DCDavid Zhang1-0/+8
[Why] PSR-SU Rate Control - or PSR-SU-RC - enables PSR-SU panels to work with variable refresh rate to allow for more power savings. Lowering the refresh rate can increase PSR residency by expanding the eDP main link shut down duration. It can also lower panel power consumption. There is a complication with PSR, since the eDP main link can be shut down. Therefore, the timing controller (TCON) on the eDP sink nees to be able to scan out its remote buffer independent of the main link. To allow the eDP source to specify the sink's refresh rate while the link is off, vendor-specific DPCD registers are used. This allows the eDP source to then "Rate Control" the panel during PSR active. [How] Add DC support to communicate with PSR-SU-RC supported eDP sinks. The sink will need to know the desired VTotal during PSR active. This change only adds support to DC, support in amdgpu_dm is still pending to enable this fully. Signed-off-by: David Zhang <dingchen.zhang@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-07drm/amd/display: Add HDMI member to DTOChris Park1-0/+1
[Why] For Pixel Rate control, when on HDMI, HDMI DTO should be selected instead of DP DTO. [How] Add HDMI member to dtbclk_dto_params, so it can be used tell apart HDMI and DP DTO in the future. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: update cursor position to DMUB FWDavid Zhang1-0/+1
[why] To involve the cursor position into dirty rectangle calculation. [how] - separate plane and cursor update by different DMUB command - send the cursor information while cursor updating, when updating cursor position/attribute, store cursor pos/attr to hubp, and notify dmub FW to exit psr before program cursor registers Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-06drm/amd/display: program PSR2 DPCD ConfigurationDavid Zhang1-1/+12
[Why] To support PSR2 Source DPCD configuration [How] Update the PSR2 Source DPCD settings while the PSR2 enabled Signed-off-by: David Zhang <dingchen.zhang@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add ODM seamless boot supportDuncan Ma1-0/+2
Revised validation logic when marking for seamless boot. Init resources accordingly when Pre-OS has ODM enabled. Reset ODM when transitioning Pre-OS odm to Post-OS non-odm to avoid corruption. Apply logic to set odm accordingly upon commit. Signed-off-by: Duncan Ma <duncan.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Implement DTBCLK ref switching on dcn32Alvin Lee1-1/+2
[WHY & HOW] Implements DTB ref clock switching with reg key default to OFF. Refactors dccg DTBCLK logic to not store redundant state information dccg. Also removes duplicated functions that should be inherited from other dcn versions. Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: add new pixel rate programmingJun Lei2-1/+5
[why] New dividers in DCCG need to be programmed depending on encoder/stream type since pixels per clock in OTG/DIO is different DIO also needs additional programming depending on pixels per clock Signed-off-by: Jun Lei <Jun.Lei@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
2022-06-03drm/amd/display: Use DTBCLK for valid pixel clockEric Bernstein1-0/+17
Use DTBCLK for valid pixel clock generation Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Fix USBC link creationDillon Varone1-0/+2
[Description] Add USBC connector ID to align with new VBIOS parsing. Add seperate DCN321 link encoder due to different PHY version affecting DP ALT related registers. Signed-off-by: Dillon Varone <dillon.varone@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: Add dependant changes for DCN32/321Aurabindo Pillai6-4/+27
[Why&How] This patch adds necessary changes needed in DC files outside DCN32/321 specific tree v2: squash in updates (Alex) Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amd/display: add CLKMGR changes for DCN32/321Aurabindo Pillai2-2/+45
Add support for managing DCN3.2.x clocks. v2: squash in smu interface updates (Alex) v3: Drop unused SMU header (Alex) Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Jerry Zuo <jerry.zuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-03drm/amdgpu/display: Prepare for new interfacesLeung, Martin2-2/+7
why: lut pipeline will be hooked up differently in some asics need to add new interfaces how: add them Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Martin <martin.leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-01drm/amd/display: Wait DMCUB to idle state before reset.hengzhou1-1/+1
[WHY] Very low rate to cause memory access issue while resetting DMCUB after the halt command was sent to it. The process of stopping fw of DMCUB may be timeout, that means it is not in idle state, such as the window frames may still be kept in cache, so reset by force will cause MMHUB hang. [HOW] After the halt command was sent, keep checking the DMCUB state until it is idle. Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: hengzhou <Hengyong.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-01drm/amd/display: Pass the new context into disable OTG WANicholas Kazlauskas1-1/+1
[Why] When enabling an HPO stream for the first time after having previously enabled a DIO stream there may be lingering DIO FIFO errors even though the DIO is no longer enabled. These can cause display clock change to hang if we don't apply the OTG disable workaround since the ramping logic is tied to OTG on. [How] The workaround wasn't being applied in the sequence of: 1 DIO stream 0 streams 1 HPO stream because current_state has no stream or planes in its context - and it's only swapped after optimize has finished. We should be using the incoming context instead to determine whether this logic is needed or not. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-06-01drm/amd/display: revert Blank eDP on disable/enable drvLeung, Martin2-6/+13
why and how: Revert this change. It was causing a black screen with certain blocks Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Jasdeep Dhillon <jdhillon@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Leung, Martin <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-05-04drm/amd/display: Add new DSC interface to disconnect from pipeEric Bernstein1-0/+1
[Why & How] Add new DSC interface to disconnect from pipe. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-25drm/amd/display: update dcn315 clk table readDmytro Laktyushkin1-0/+1
Clean up the sequence by making sure clk_mgr always builds a reasonable clock table regardless of what we read from smu by moving all defaults from resource soc struct to clk_mgr. Now the only thing resource soc update does is read the clock table and apply any DC specific policy decisions to how clocks are populated in dml soc. Reviewed-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-04-12drm/amd/display: Add odm seamless boot supportDuncan Ma1-0/+2
[WHY] Implement changes to transition from Pre-OS odm to Post-OS odm support. Seamless boot case is also considered. [HOW] Revised validation logic when marking for seamless boot. Init resources accordingly when Pre-OS has odm enabled. Reset odm and det size when transitioning Pre-OS odm to Post-OS non-odm to avoid corruption. Apply logic to set odm accordingly upon commit. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by: Duncan Ma <Duncan.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-25drm/amd/display: Add support for zstate during extended vblankGabe Teeger1-0/+3
[why] When we enter FREESYNC_STATE_VIDEO, we want to use the extra vblank portion to enter zstate if possible. [how] When we enter freesync, a full update is triggered and the new vtotal with extra lines is passed to dml in a stream update. The time gained from extra vblank lines is calculated in microseconds. We allow zstate entry if the time gained is greater than 5 ms, which is the current policy. Furthermore, an optimized value for min_dst_y_next_start is calculated and written to its register. When exiting freesync, another full update is triggered and default values are restored. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Add save/restore PANEL_PWRSEQ_REF_DIV2Charlene Liu1-0/+1
[why] DCN31 has this in zstate save/restore sequence. need for non_zstate supported ASIC [how] add this PANEL_PWRSEQ_REF_DIV2 to existing panel_cntl_hw_init structure. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Charlene Liu <Charlene.Liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Wait for hubp read line for PollockBecle Lee1-0/+1
[Why] Underflow occurred while hubp ret pipe read is idle and the second pipe is powered up and added. Flickering and underflow are only observed on Pollock. [How] Check the hubp ret pipe read prior to unlock pipes. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Signed-off-by: Becle Lee <becle.lee@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-03-15drm/amd/display: Add pstate verification and recovery for DCN31Nicholas Kazlauskas1-0/+2
[Why] To debug when p-state is being blocked and avoid PMFW hangs when it does occur. [How] Re-use the DCN10 hardware sequencer by adding a new interface for verifying p-state high on the hubbub. The interface is mostly the same as the DCN10 interface, but the bit definitions have changed for the debug bus. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: add set dp lane settings to link_hwssWenjing Liu1-1/+2
[why] Factor set dp lane settings to link_hwss. v2: fix statement with no effect warning (Alex) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: revert "Reset fifo after enable otg"Zhan Liu1-4/+0
[Why] This change causes regression, that prevents some systems from lighting up internal displays. [How] Revert this patch until a new solution is ready. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: abstract encoder related hwseq across different typesWenjing Liu1-0/+4
[why] Current we have hundreds of if/else or switch statement to check encoder type in dc_link level. The reason is because depending on the type of encoder dc_link needs to perform similar programming task but with different encoder interfaces. The story is to abstract these interfaces so dc_link can just perform the programming task without knowing the detail of which encoder it's dealing with. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/display: Drop DCN for DP2.x logicWenjing Liu5-10/+2
[Why & How] DCN guard is not necessary for DP2.x relevant logic. Drop them. v2: squash in fix for misplaced #endif (Alex) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-30drm/amd/display: support dynamic HPO DP link encoder allocationWenjing Liu1-1/+2
[why] When there are more DP2.0 RXs connected than the number HPO DP link encoders we have, we need to dynamically allocate HPO DP link encoder to the port that needs it. [how] Only allocate HPO DP link encoder when it is needed. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-14drm/amd/display: implement dc_mode_memclkMartin Leung2-0/+8
why: Need interface to lower clocks when in dc (power save) mode. Must be able to work with p_state unsupported cases Can cause flicker when OS notifies us of dc state change how: added dal3 interface for KMD added pathway to query smu for this softmax added blank before clock change to override underflow added logic to change clk based on pstatesupport and softmax added logic in prepare/optimize_bw to conform while changing clocks Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Martin Leung <Martin.Leung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-22drm/amd/display: fixed the DSC power off sequence during Driver PnPYi-Ling Chen2-0/+4
[WHY] After unloading driver, driver would not disable DSC function. At next loading driver, driver would power all DSC engines off. When driver powered the active DSC off, the screen would be gray until reprograming DSC relatived register correcntly. [HOW] 1. Remove DSC Power down code into init_pipes() 2. Depend on the OTG mapping information and DSC status to skip power off for the working DSC. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-22drm/amd/display: Enable DSC over eDPMikita Lipski1-0/+1
[why] - Adding a DM interface to enable DSC over eDP on Linux - DSC over eDP will allow to power savings by reducing the bandwidth required to support panel's modes - Apply link optimization algorithm to reduce link bandwidth when DSC is enabled [how] - Read eDP panel's DSC capabilities - Apply DSC policy on eDP panel based on its DSC capabilities - Enable DSC encoder's on the pipe - Enable DSC on panel's side by setting DSC_ENABLE DPCD register - Adding link optimization algorithm to reduce link rate or lane count based Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-11-22drm/amd/display: Reset fifo after enable otgXu, Jinze1-0/+4
[Why] In fast boot sequence, when change dispclk, otg is disabled but digfe is enabled. This may cause dig fifo error. [How] Reset dig fifo after enable otg. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.