aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/pm/powerplay/smumgr
AgeCommit message (Collapse)AuthorFilesLines
2022-09-20drm/amd/pm: Remove unneeded result variableye xingchen1-3/+1
Return the value atomctrl_initialize_mc_reg_table_v2_2() directly instead of storing it in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-27drm/amd: Expose the FRU SMU I2C busLuben Tuikov1-2/+2
Expose both SMU I2C buses. Some boards use the same bus for both the RAS and FRU EEPROMs and others use different buses. This enables the additional I2C bus and sets the right buses to use for RAS and FRU EEPROM access. Cc: Roy Sun <Roy.Sun@amd.com> Co-developed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-01-25drm/amd/pm: use dev_*** to print output in multiple GPUsGuchun Chen5-10/+15
In multiple GPU configuration, when failed to send a SMU message, it's hard to figure out which GPU has such problem. So it's not comfortable to user. [40190.142181] amdgpu: [powerplay] last message was failed ret is 65535 [40190.242420] amdgpu: [powerplay] failed to send message 201 ret is 65535 [40190.392763] amdgpu: [powerplay] last message was failed ret is 65535 [40190.492997] amdgpu: [powerplay] failed to send message 200 ret is 65535 [40190.743575] amdgpu: [powerplay] last message was failed ret is 65535 [40190.843812] amdgpu: [powerplay] failed to send message 282 ret is 65535 Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-08drm/amd/pm: invalidate hdp before CPU access the memory written by GPUEvan Quan4-10/+5
To eliminate the possible influence by outdated HDP read cache. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/powerplay/iceland: return an error if copying to smc failsAlex Deucher1-1/+1
Rather than just silently dropping it. Also fixes a set but unused variable warning. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/powerplay/ci: return an error if copying to smc failsAlex Deucher1-1/+1
Rather than just silently dropping it. Also fixes a set but unused variable warning. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-02drm/amdgpu/powerplay/tonga: return an error if copying to smc failsAlex Deucher1-1/+1
Rather than just silently dropping it. Also fixes a set but unused variable warning. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01drm/amd/pm/powerplay/smumgr/fiji_smumgr: Demote kernel-doc format abuseLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../pm/powerplay/smumgr/fiji_smumgr.c:1107: warning: Function parameter or member 'mem_clock' not described in 'fiji_get_mclk_frequency_ratio' Cc: Evan Quan <evan.quan@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01drm/amd/pm/powerplay/smumgr/smu9_smumgr: Include our own header containing our prototypesLee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../pm/powerplay/smumgr/smu9_smumgr.c:38:6: warning: no previous prototype for ‘smu9_is_smc_ram_running’ [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../pm/powerplay/smumgr/smu9_smumgr.c:112:5: warning: no previous prototype for ‘smu9_send_msg_to_smc’ [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../pm/powerplay/smumgr/smu9_smumgr.c:140:5: warning: no previous prototype for ‘smu9_send_msg_to_smc_with_parameter’ [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../pm/powerplay/smumgr/smu9_smumgr.c:165:10: warning: no previous prototype for ‘smu9_get_argument’ [-Wmissing-prototypes] Cc: Evan Quan <evan.quan@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01drm/amd/pm/powerplay/smumgr/vegam_smumgr: Make function called by reference staticLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../pm/powerplay/smumgr/vegam_smumgr.c:2249:5: warning: no previous prototype for ‘vegam_thermal_avfs_enable’ [-Wmissing-prototypes] Cc: Evan Quan <evan.quan@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01drm/amd/pm/powerplay/smumgr/iceland_smumgr: Make function called by reference staticLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../pm/powerplay/smumgr/iceland_smumgr.c:2085:5: warning: no previous prototype for ‘iceland_thermal_setup_fan_table’ [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../pm/powerplay/smumgr/iceland_smumgr.c: In function ‘iceland_thermal_setup_fan_table’: drivers/gpu/drm/amd/amdgpu/../pm/powerplay/smumgr/iceland_smumgr.c:2093:6: warning: variable ‘res’ set but not used [-Wunused-but-set-variable] Cc: Evan Quan <evan.quan@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Huang Rui <ray.huang@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01drm/amd/pm/powerplay/smumgr/polaris10_smumgr: Make function called by reference staticLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../pm/powerplay/smumgr/polaris10_smumgr.c:2145:5: warning: no previous prototype for ‘polaris10_thermal_avfs_enable’ [-Wmissing-prototypes] Cc: Evan Quan <evan.quan@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01drm/amd/pm/powerplay/smumgr/fiji_smumgr: Remove unused variable 'result'Lee Jones1-7/+6
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../pm/powerplay/smumgr/fiji_smumgr.c: In function ‘fiji_populate_smc_boot_level’: drivers/gpu/drm/amd/amdgpu/../pm/powerplay/smumgr/fiji_smumgr.c:1603:6: warning: variable ‘result’ set but not used [-Wunused-but-set-variable] Cc: Evan Quan <evan.quan@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-01drm/amdgpu: only skip smc sdma sos ta and asd fw in SRIOV for navi12Stanley.Yang1-7/+5
The KFDTopologyTest.BasicTest will failed if skip smc, sdma, sos, ta and asd fw in SRIOV for vega10, so adjust above fw and skip load them in SRIOV only for navi12. v2: remove unnecessary asic type check. Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-11-24drm/amd/pm: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple of warnings by explicitly adding a break statement instead of letting the code fall through to the next case, and a fallthrough pseudo-keyword as a replacement for a /* fall through */ comment, Notice that Clang doesn't recognize /* fall through */ comments as implicit fall-through markings. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-30drm/amd/pm: do not use ixFEATURE_STATUS for checking smc runningEvan Quan1-4/+1
This reverts commit f87812284172a9809820d10143b573d833cd3f75 ("drm/amdgpu: Fix bug where DPM is not enabled after hibernate and resume"). It was intended to fix Hawaii S4(hibernation) issue but break S3. As ixFEATURE_STATUS is filled with garbage data on resume which can be only cleared by reloading smc firmware(but that will involve many changes). So, we will revert this S4 fix and seek a new way. Signed-off-by: Evan Quan <evan.quan@amd.com> Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-30drm/amd/pm: perform SMC reset on suspend/hibernationEvan Quan2-0/+32
So that the succeeding resume can be performed based on a clean state. Signed-off-by: Evan Quan <evan.quan@amd.com> Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: correct SMC sclk/mclk boot level setupEvan Quan1-0/+8
Correct Polaris smc boot level setup. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: correct clk/voltage dependence setupEvan Quan1-0/+2
Correct Polaris10 clk/voltage dependence setup. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: correct sclk/mclk dpm enablementEvan Quan1-1/+2
Correct Polaris10 sclk/mclk dpm enablement. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: correct platformcaps setupEvan Quan1-2/+5
Correct Polaris10 platformcaps setup. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: correct VRconfig settingEvan Quan1-1/+14
Correct Polaris VRconfig setting. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: correct vddc phase control settingEvan Quan1-1/+6
Correct Polaris10 vddc phase control. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: correct avfs fuse settingsEvan Quan1-32/+23
Correct Polaris10 avfs fuse setting. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: correct VR shared rail infoEvan Quan1-0/+14
Add VR shared rail info. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: add mc register table initializationEvan Quan2-0/+20
Add mc register table initialization. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: setup zero rpm parameters for polaris10Evan Quan1-0/+17
Only if the ZeroRPM feature is supported. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: correct polaris10 clock stretcher data table settingEvan Quan1-31/+11
By using the saved copy of ro_range_maximum and ro_range_minimum. Correct the setting for "LdoRefSel". Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: drop redundant efuse mask calculationsEvan Quan2-4/+2
By moving that in atomfw_read_efuse(). Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: optimize AC timing programmingEvan Quan1-1/+1
Programming AC Timing Parameters is only dependent on MCLK. No need to nest loop for each SCLK DPM level. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: drop arb table first byte workaroundEvan Quan1-31/+0
As this is not needed for polaris. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: add pptable VRHotLevel settingEvan Quan1-0/+3
Add missing VRHotLevel setting. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: correct the BootLinkLevel setupEvan Quan1-1/+1
Set the BootLinkLevel as the max level. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: correct the ACPI table setup V2Evan Quan1-1/+2
Correct the setting for "ActivityLevel". V2: rich the comment Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: correct mclk table setupEvan Quan1-12/+8
Correct the settings for "StutterEnable" and "EnabledForActivity". Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: correct sclk table setupEvan Quan1-2/+21
Correct Polaris10 sclk table setup. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: correct vddci table setupEvan Quan1-2/+2
Make sure the settings are applied only when voltage controlled by gpio. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: populate smc samu tableEvan Quan1-0/+53
Add missing smc samu table setup. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-10-27drm/amd/pm: populate smc vddc tableEvan Quan1-0/+26
Add missing vddc table setup. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-25drm/amdgpu: Remove some useless codeEmily.Deng1-7/+0
Signed-off-by: Emily.Deng <Emily.Deng@amd.com> Reviewed-by: Frank Min <Frank.Min@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-09-25drm/amd: Skip not used microcode loading in SRIOVJingwen Chen1-5/+7
smc, sdma, sos, ta and asd fw is not used in SRIOV. Skip them to accelerate sw_init for navi12. v2: skip above fw in SRIOV for vega10 and sienna_cichlid v3: directly skip psp fw loading in SRIOV Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by: Emily.Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-27drm/amdgpu: Specify get_argument function for ci_smu_funcsSandeep Raghuraman1-0/+2
Starting in Linux 5.8, the graphics and memory clock frequency were not being reported for CIK cards. This is a regression, since they were reported correctly in Linux 5.7. After investigation, I discovered that the smum_send_msg_to_smc() function, attempts to call the corresponding get_argument() function of ci_smu_funcs. However, the get_argument() function is not defined in ci_smu_funcs. This patch fixes the bug by specifying the correct get_argument() function. Fixes: a0ec225633d9f6 ("drm/amd/powerplay: unified interfaces for message issuing and response checking") Signed-off-by: Sandeep Raghuraman <sandy.8925@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-14drm/amd/pm: optimize the power related source code layoutEvan Quan28-0/+21080
The target is to provide a clear entry point(for power routines). Also this can help to maintain a clear view about the frameworks used on different ASICs. Hopefully all these can make power part more friendly to play with. Signed-off-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>