aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_device_info.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-06-17drm/i915: move modesetting core code under display/Jani Nikula1-2/+2
Now that we have a new subdirectory for display code, continue by moving modesetting core code. display/intel_frontbuffer.h sticks out like a sore thumb, otherwise this is, again, a surprisingly clean operation. v2: - don't move intel_sideband.[ch] (Ville) - use tabs for Makefile file lists and sort them Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613084416.6794-3-jani.nikula@intel.com
2019-06-17drm/i915: Change gamma/degamma_lut_size data type to u32Shashank Sharma1-2/+2
Currently, data type of gamma_lut_size & degamma_lut_size elements in intel_device_info is u16, which means it can accommodate maximum 64k values. In case of ICL multisegmented gamma, the size of gamma LUT is 256K. This patch changes the data type of both of these elements to u32. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Uma Shankar <uma.shankar@intel.com> V4: Added Uma's r-b. Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1560321900-18318-2-git-send-email-uma.shankar@intel.com
2019-06-12drm/i915: Kill INTEL_SUBPLATFORM_AMLVille Syrjälä1-1/+0
All AML parts are either KBL ULX or CFL ULX so there is no point in keeping INTEL_SUBPLATFORM_AML around. As these are the only CFL ULX parts (normal CFL didn't have Y SKUs) so we'll just replace IS_AML_ULX with IS_CFL_ULX (it was already paired with IS_KBL_ULX which accounts for the other half of the AML parts). Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190605162946.19223-2-ville.syrjala@linux.intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-06-09drm/i915/guc: always use Command Transport BuffersDaniele Ceraolo Spurio1-1/+0
Now that we've moved the Gen9 GuC blobs to version 32 we have CTB support on all gens, so no need to restrict the usage to Gen11+. Note that MMIO communication is still required for CTB initialization. v2: fix commit message nits (Michal) Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190606224225.14287-1-daniele.ceraolospurio@intel.com
2019-05-31drm/i915: add force_probe module parameter to replace alpha_supportJani Nikula1-1/+1
The i915.alpha_support module parameter has caused some confusion along the way. Add new i915.force_probe parameter to specify PCI IDs of devices to probe, when the devices are recognized but not automatically probed by the driver. The name is intended to reflect what the parameter effectively does, avoiding any overloaded semantics of "alpha" and "support". The parameter supports "" to disable, "<pci-id>,[<pci-id>,...]" to enable force probe for one or more devices, and "*" to enable force probe for all known devices. Also add new CONFIG_DRM_I915_FORCE_PROBE config option to replace the DRM_I915_ALPHA_SUPPORT option. This defaults to "*" if DRM_I915_ALPHA_SUPPORT=y. Instead of replacing i915.alpha_support immediately, let the two coexist for a while, with a deprecation message, for a transition period. Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190506134801.28751-1-jani.nikula@intel.com
2019-05-28drm/i915: Refactor sseu helper functionsStuart Summers1-44/+0
Move functions to intel_sseu.h and remove inline qualifier. Additionally, ensure these are all prefixed with intel_sseu_* to match the convention of other functions in i915. v2: fix spacing from checkpatch warning v3: squash helper function changes into a single patch break 80 character line to fix checkpatch warning move get/set_eus helpers to intel_device_info.c v4: Remove intel_ prefix from static functions in intel_device_info.c and correctly copy changes to stride calculation in those functions. Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-5-stuart.summers@intel.com
2019-05-28drm/i915: Add macro for SSEU stride calculationStuart Summers1-6/+3
Subslice stride and EU stride are calculated multiple times in i915_query. Move this calculation to a macro to reduce code duplication. v2: update headers in intel_sseu.h v3: use GEN_SSEU_STRIDE for stride calculations in intel_sseu.h apply s/bits/max_entries/ to GEN_SSEU_STRIDE parameter Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-3-stuart.summers@intel.com
2019-04-24drm/i915: Move GraphicsTechnology files under gt/Chris Wilson1-2/+4
Start partitioning off the code that talks to the hardware (GT) from the uapi layers and move the device facing code under gt/ One casualty is s/intel_ringbuffer.h/intel_engine.h/ with the plan to subdivide that header and body further (and split out the submission code from the ringbuffer and logical context handling). This patch aims to be simple motion so git can fixup inflight patches with little mess. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190424174839.7141-1-chris@chris-wilson.co.uk
2019-04-24drm/i915: Store the default sseu setup on the engineChris Wilson1-27/+1
As we push for better compartmentalisation, it is more convenient to copy the default sseu configuration from the engine into the derived logical context, than it is to dig it out from i915->runtime_info. v2: Use intel_sseu_from_device_info() to describe the converter Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190424095134.30249-1-chris@chris-wilson.co.uk
2019-04-19drm/i915: Track HAS_RPS alongside HAS_RC6 in the device infoChris Wilson1-0/+1
For consistency (and elegance!), add intel_device_info.has_rps. The immediate boon is that RPS support is now emitted along the other capabilities in the debug log and after errors. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190419134836.5626-1-chris@chris-wilson.co.uk
2019-04-02drm/i915: Move intel_engine_mask_t around for use by i915_request_types.hChris Wilson1-2/+1
We want to use intel_engine_mask_t inside i915_request.h, which means extracting it from the general header file mess and placing it inside a types.h. A knock on effect is that the compiler wants to warn about type-contraction of ALL_ENGINES into intel_engine_maskt_t, so prepare for the worst. v2: Use intel_engine_mask_t consistently v3: Move I915_NUM_ENGINES to its natural home at the end of the enum Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190401162641.10963-1-chris@chris-wilson.co.uk Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2019-04-01drm/i915: Introduce concept of a sub-platformTvrtko Ursulin1-1/+26
Concept of a sub-platform already exist in our code (like ULX and ULT platform variants and similar),implemented via the macros which check a list of device ids to determine a match. With this patch we consolidate device ids checking into a single function called during early driver load. A few low bits in the platform mask are reserved for sub-platform identification and defined as a per-platform namespace. At the same time it future proofs the platform_mask handling by preparing the code for easy extending, and tidies the very verbose WARN strings generated when IS_PLATFORM macros are embedded into a WARN type statements. v2: Fixed IS_SUBPLATFORM. Updated commit msg. v3: Chris was right, there is an ordering problem. v4: * Catch-up with new sub-platforms. * Rebase for RUNTIME_INFO. * Drop subplatform mask union tricks and convert platform_mask to an array for extensibility. v5: * Fix subplatform check. * Protect against forgetting to expand subplatform bits. * Remove platform enum tallying. * Add subplatform to error state. (Chris) * Drop macros and just use static inlines. * Remove redundant IRONLAKE_M. (Ville) v6: * Split out Ironlake change. * Optimize subplatform check. * Use __always_inline. (Lucas) * Add platform_mask comment. (Paulo) * Pass stored runtime info in error capture. (Chris) v7: * Rebased for new AML ULX device id. * Bump platform mask array size for EHL. * Stop mentioning device ids in intel_device_subplatform_init by using the trick of splitting macros i915_pciids.h. (Jani) * AML seems to be either a subplatform of KBL or CFL so express it like that. v8: * Use one device id table per subplatform. (Jani) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jose Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190327142328.31780-1-tvrtko.ursulin@linux.intel.com
2019-03-25drm/i915: stop storing the media fuseDaniele Ceraolo Spurio1-4/+0
We're already updating the engine_mask to reflect what's in the HW, so we can just get the info from there. A couple of macros have been added to facilitate this. v2: Appease checkpatch Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190322002431.9585-1-daniele.ceraolospurio@intel.com
2019-03-22drm/i915/ehl: Add ElkhartLake platformBob Paauwe1-0/+1
Add ElkhartLake as a unique platform as there are some differences between it and Icelake. Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190322175847.25707-2-rodrigo.vivi@intel.com
2019-03-15drm/i915: Drop address size from ppgtt_typeChris Wilson1-1/+0
With the introduction of the separate addressable bits into the device info, we can remove the conflation of the ppgtt size from the ppgtt type. Based on a patch by Bob Paauwe. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-3-chris@chris-wilson.co.uk
2019-03-15drm/i915: Record platform specific ppGTT size in intel_device_infoChris Wilson1-2/+4
As the maximum addressable bits is determined by platform, record that information in our static chipset tables. This has the advantage of being clearly recorded in our capability dumps for dmesg, debugfs and error states. Based on a patch by Bob Paauwe. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190314223839.28258-2-chris@chris-wilson.co.uk
2019-03-05drm/i915: Store the BIT(engine->id) as the engine's maskChris Wilson1-3/+3
In the next patch, we are introducing a broad virtual engine to encompass multiple physical engines, losing the 1:1 nature of BIT(engine->id). To reflect the broader set of engines implied by the virtual instance, lets store the full bitmask. v2: Use intel_engine_mask_t (s/ring_mask/engine_mask/) v3: Tvrtko voted for moah churn so teach everyone to not mention ring and use $class$instance throughout. v4: Comment upon the disparity in bspec for using VCS1,VCS2 in gen8 and VCS[0-4] in later gen. We opt to keep the code consistent and use 0-index naming throughout. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190305180332.30900-1-chris@chris-wilson.co.uk
2019-02-05drm/i915: Rename HAS_GMCHRodrigo Vivi1-1/+1
First of all GMCH can be considered a feature by itself since it is a chip present in some platforms that connects the IA processor to memory and other components in PC. Also with the introduction of display block at device info, we got a redundant definition: .display.has_gmch_display = 1, So, let's clean up things a bit and use the standardized way of has_feature on displays side. No functional change and no manual interaction to generate this patch. It is only: sed -si -e 's/has_gmch_display/has_gmch/g' \ -e 's/HAS_GMCH_DISPLAY/HAS_GMCH/g' drivers/gpu/drm/i915/*{c,h} Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190204222538.15842-1-rodrigo.vivi@intel.com
2019-01-30drm/i915: Apply LUT validation checks to platforms more accurately (v3)Matt Roper1-0/+2
Use of the new DRM_COLOR_LUT_NON_DECREASING test was a bit over-zealous; it doesn't actually need to be applied to the degamma on "bdw-style" platforms. Likewise, we overlooked the fact that CHV should have that test applied to the gamma LUT as well as the degamma LUT. Rather than adding more complicated platform checking to intel_color_check(), let's just store the appropriate set of LUT validation flags for each platform in the intel_device_info structure. v2: - Shuffle around LUT size tests so that the hardware-specific tests won't be applied to legacy gamma tables. (Ville) - Add a debug message so that it will be easier to understand why an atomic transaction involving incorrectly-sized LUT's got rejected by the driver. v3: - Switch size_t's to int's. (Ville) Fixes: 85e2d61e4976 ("drm/i915: Validate userspace-provided color management LUT's (v4)") References: https://lists.freedesktop.org/archives/intel-gfx/2019-January/187634.html Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190130181022.4291-1-matthew.d.roper@intel.com
2019-01-03drm/i915: Always try to reset the GPU on takeoverChris Wilson1-0/+1
When we first introduced the reset to sanitize the GPU on taking over from the BIOS and before returning control to third parties (the BIOS!), we restricted it to only systems utilizing HW contexts as we were uncertain of how stable our reset mechanism truly was. We now have reasonable coverage across all machines that expose a GPU reset method, and so we should be safe to sanitize the GPU state everywhere. v2: We _have_ to skip the reset if it would clobber the display. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190103112104.19561-1-chris@chris-wilson.co.uk
2019-01-02drm/i915: drop intel_device_info_dump()Jani Nikula1-2/+0
The debugfs, error state and regular dmesg logging dump needs seem to be different. Remove the generic dump function only used for the welcome message. This may be added back later when better abstractions are identified, but at the moment this seems to be the simplest considering the device info rework in progress. No longer rely on device info being a substruct of dev_priv. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/70ff0c7c0ec3ef8747af3c78e272b5a82be3d55b.1546267488.git.jani.nikula@intel.com
2019-01-02drm/i915: pass dev_priv to intel_device_info_runtime_init()Jani Nikula1-1/+1
With the static/runtime device info split, this makes more sense. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ad5b448e4e318df0d292d73e6c3378f3e6b9bae5.1546267488.git.jani.nikula@intel.com
2019-01-02drm/i915: start moving runtime device info to a separate structJani Nikula1-10/+15
First move the low hanging fruit, the fields that are only initialized runtime. Use RUNTIME_INFO() exclusively to access the fields. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/c24fe7a4b0492a888690c46814c0ff21ce2f12b1.1546267488.git.jani.nikula@intel.com
2018-12-13drm/i915/icl: Record the valid VDBoxes with SFC capabilityOscar Mateo1-0/+3
In Gen11, only even numbered "logical" VDBoxes are hooked up to an SFC (Scaler & Format Converter) unit. We will use this information to decide when the SFC units need to be reset. BSpec: 20189 Signed-off-by: Tomasz Lis <tomasz.lis@intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181213091522.2926-3-chris@chris-wilson.co.uk
2018-12-03drm/i915: Move display device info capabilities to its own structJosé Roberto de Souza1-11/+21
This helps separate what capabilities are display capabilities. v3: Moving display struct right after flags (Lucas) Cc: Jani Nikula <jani.nikula@linux.intel.com> Suggested-by: Jani Nikula <jani.nikula@linux.intel.com> Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181130232048.14216-2-jose.souza@intel.com
2018-11-09drm/i915: fix subslice mask array sizeDaniele Ceraolo Spurio1-1/+1
We have a subslice mask per slice, not per subslice. MAX_SUBSLICES > MAX_SLICES, so the wrong size didn't cause any issue apart from using extra memory. Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181106182918.5748-1-daniele.ceraolospurio@intel.com
2018-11-02drm/i915: remove palette_offsets from device info in favor of _PICK()Jani Nikula1-1/+0
The device info offset arrays for unevenly spaced register offsets is great for widely used registers. However, the palette registers are only used in one function, i9xx_load_luts_internal(), and only for GMCH platforms, wasting device info. Replace palette_offsets with _PICK() in palette register definition. While the use of _PICK() does not check for pipe C existence, neither does the current offset array usage, and leads to bogus address when pipe C is passed to PALETTE() on non-CHV. Using _PICK() at least leads to a sensible register offset, just non-existing on non-CHV. Either way, this shouldn't happen anyway. Remove unused old palette macros while at it. Bloat-o-meter results below for completeness. add/remove: 0/0 grow/shrink: 3/6 up/down: 94/-278 (-184) Function old new delta i9xx_load_luts_internal 394 483 +89 i915_driver_load 5103 5107 +4 g4x_pre_enable_dp 378 379 +1 intel_engines_init_mmio 1117 1116 -1 intel_engine_lookup_user 47 46 -1 hdmi_port_clock_valid 310 309 -1 gen11_irq_handler 707 706 -1 intel_device_info_dump_runtime 329 311 -18 intel_device_info_runtime_init 5166 4910 -256 Total: Before=918650, After=918466, chg -0.02% add/remove: 0/0 grow/shrink: 0/48 up/down: 0/-576 (-576) Data old new delta intel_valleyview_info 200 188 -12 intel_skylake_gt4_info 200 188 -12 intel_skylake_gt3_info 200 188 -12 intel_skylake_gt2_info 200 188 -12 intel_skylake_gt1_info 200 188 -12 intel_sandybridge_m_gt2_info 200 188 -12 intel_sandybridge_m_gt1_info 200 188 -12 intel_sandybridge_d_gt2_info 200 188 -12 intel_sandybridge_d_gt1_info 200 188 -12 intel_pineview_info 200 188 -12 intel_kabylake_gt3_info 200 188 -12 intel_kabylake_gt2_info 200 188 -12 intel_kabylake_gt1_info 200 188 -12 intel_ivybridge_q_info 200 188 -12 intel_ivybridge_m_gt2_info 200 188 -12 intel_ivybridge_m_gt1_info 200 188 -12 intel_ivybridge_d_gt2_info 200 188 -12 intel_ivybridge_d_gt1_info 200 188 -12 intel_ironlake_m_info 200 188 -12 intel_ironlake_d_info 200 188 -12 intel_icelake_11_info 200 188 -12 intel_i965gm_info 200 188 -12 intel_i965g_info 200 188 -12 intel_i945gm_info 200 188 -12 intel_i945g_info 200 188 -12 intel_i915gm_info 200 188 -12 intel_i915g_info 200 188 -12 intel_i865g_info 200 188 -12 intel_i85x_info 200 188 -12 intel_i845g_info 200 188 -12 intel_i830_info 200 188 -12 intel_haswell_gt3_info 200 188 -12 intel_haswell_gt2_info 200 188 -12 intel_haswell_gt1_info 200 188 -12 intel_gm45_info 200 188 -12 intel_geminilake_info 200 188 -12 intel_g45_info 200 188 -12 intel_g33_info 200 188 -12 intel_coffeelake_gt3_info 200 188 -12 intel_coffeelake_gt2_info 200 188 -12 intel_coffeelake_gt1_info 200 188 -12 intel_cherryview_info 200 188 -12 intel_cannonlake_info 200 188 -12 intel_broxton_info 200 188 -12 intel_broadwell_rsvd_info 200 188 -12 intel_broadwell_gt3_info 200 188 -12 intel_broadwell_gt2_info 200 188 -12 intel_broadwell_gt1_info 200 188 -12 Total: Before=195529, After=194953, chg -0.29% Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-1-jani.nikula@intel.com
2018-10-26drm/i915/icl: Store available engine masks in INTEL_INFOTvrtko Ursulin1-0/+4
Upcoming GuC code will need to read the fused off engine masks as well, and will also want to have them as enabled instead of disabled masks. To consolidate the read-out place we can store them in this fashion inside INTEL_INFO so they can be easily referenced in the future. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181018104106.30147-1-tvrtko.ursulin@linux.intel.com
2018-09-27drm/i915: Remove i915.enable_ppgtt overrideChris Wilson1-3/+10
Now that we are confident in providing full-ppgtt where supported, remove the ability to override the context isolation. v2: Remove faked aliasing-ppgtt for testing as it no longer is accepted. v3: s/USES/HAS/ to match usage and reject attempts to load the module on old GVT-g setups that do not provide support for full-ppgtt. v4: Insulate ABI ppGTT values from our internal enum (later plans involve moving ppGTT depth out of the enum, thus potentially breaking ABI unless we document the current values). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Zhi Wang <zhi.a.wang@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180926201222.5643-1-chris@chris-wilson.co.uk
2018-08-06drm/i915: kill resource streamer supportLucas De Marchi1-1/+0
After disabling resource streamer on ICL (due to it actually not existing there), I got feedback that there have been some experimental patches for mesa to use RS years ago, but nothing ever landed or shipped because there was no performance improvement. This removes it from kernel keeping the uapi defines around for compatibility. v2: - re-add the inadvertent removal of CTX_CTRL_INHIBIT_SYN_CTX_SWITCH - don't bother trying to document removed params on uapi header: applications should know that from the query. (from Chris) v3: - disable CTX_CTRL_RS_CTX_ENABLE istead of removing it - reword commit message after Daniele confirmed no performance regression on his machine - reword commit message to make clear RS is being removed due to never been used v4: - move I915_EXEC_RESOURCE_STREAMER to __I915_EXEC_ILLEGAL_FLAGS so the check on ioctl() is made much earlier by i915_gem_check_execbuffer() (suggested by Tvrtko) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180803232443.17193-1-lucas.demarchi@intel.com
2018-07-20drm/i915: Only force GGTT coherency w/a on required chipsetsChris Wilson1-0/+1
Not all chipsets have an internal buffer delaying the visibility of writes via the GGTT being visible by other physical paths, but we use a very heavy workaround for all. We only need to apply that workarounds to the chipsets we know suffer from the delay and the resulting coherency issue. Similarly, the same inconsistent coherency fouls up our ABI promise that a write into a mmap_gtt is immediately visible to others. Since the HW has made that a lie, let userspace know when that contract is broken. (Not that userspace would want to use mmap_gtt on those chipsets for other performance reasons...) Testcase: igt/drv_selftest/live_coherency Testcase: igt/gem_mmap_gtt/coherency Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100587 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180720101910.11153-1-chris@chris-wilson.co.uk
2018-07-06drm/i915: Record logical context support in driver capsChris Wilson1-0/+1
Avoid looking at the magical engines[RCS] to decide if the HW and driver supports logical contexts, and instead record that knowledge during initialisation. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180706101442.21279-1-chris@chris-wilson.co.uk
2018-03-21drm/i915/icl: Added ICL 11 slice, subslice and EU fuse detectionKelvin Gardiner1-1/+1
This patch adds support to detect ICL, slice, subslice and EU fuse settings. Add addresses for ICL 11 slice, subslice and EU fuses registers. These register addresses are the same as previous platforms but the format and / or the meaning of the information is different. Therefore Gen11 defines for these registers are added. Bspec: 9731 Bspec: 20643 Bspec: 20673 v2: Update fusing information storage after introducing the new query uAPI (Lionel) v3 (Oscar): - The maximum number of slices in ICL 11 is 1 - The subslice disable fuse can potentially store information in all bits - GEN_MAX_SUBSLICES has to be increased to 8 - Don't trust the slice enabled fuse outside the max number of expected slices - Indentation fix and some reordering and renaming of local variables v4: Use single space after Cc tag Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Kelvin Gardiner <kelvin.gardiner@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1521575121-9577-1-git-send-email-oscar.mateo@intel.com
2018-03-20drm/i915/icl: Check for fused-off VDBOX and VEBOX instancesOscar Mateo1-0/+2
In Gen11, the Video Decode engines (aka VDBOX, aka VCS, aka BSD) and the Video Enhancement engines (aka VEBOX, aka VECS) could be fused off. Also, each VDBOX and VEBOX has its own power well, which only exist if the related engine exists in the HW. Unfortunately, we have a Catch-22 situation going on: we need the blitter forcewake to read the register with the fuse info, but we cannot initialize the forcewake domains without knowin about the engines present in the HW. We workaround this problem by allowing the initialization of all forcewake domains and then pruning the fused off ones, as per the fuse information. Bspec: 20680 v2: We were shifting incorrectly for vebox disable (Vinay) v3: Assert mmio is ready and warn if we have attempted to initialize forcewake for fused-off engines (Paulo) v4: - Use INTEL_GEN in new code (Tvrtko) - Shorter local variable (Tvrtko, Michal) - Keep "if (!...) continue" style (Tvrtko) - No unnecessary BUG_ON (Tvrtko) - WARN_ON and cleanup if wrong mask (Tvrtko, Michal) - Use I915_READ_FW (Michal) - Use I915_MAX_VCS/VECS macros (Michal) v5: Rebased by Rodrigo fixing conflicts on top of: "drm/i915: Simplify intel_engines_init" v6: Fix v5. Remove info->num_rings. (by Oscar) v7: Rebase (Rodrigo). v8: - s/intel_device_info_fused_off_engines/ intel_device_info_init_mmio (Chris) - Make vdbox_disable & vebox_disable local variables (Chris) v9: - Move function declaration to intel_device_info.h (Michal) - Missing indent in bit fields definitions (Michal) - When RC6 is enabled by BIOS, the fuse register cannot be read until the blitter powerwell is awake. Shuffle where the fuse is read, prune the forcewake domains after the fact and change the commit message accordingly (Vinay, Sagar, Chris). v10: - Improved commit message (Sagar) - New line in header file (Sagar) - Specify the message in fw_domain_reset applies to ICL+ (Sagar) Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180316121456.11577-1-mika.kuoppala@linux.intel.com [Mika: soothe checkpatch on commit msg] Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
2018-03-08drm/i915/debugfs: add rcs topology entryLionel Landwerlin1-0/+2
While the end goal is to make this information available to userspace through a new ioctl, there is no reason we can't display it in a human readable fashion through debugfs. slice0: 3 subslice(s) (0x7): subslice0: 8 EUs (0xff) subslice1: 8 EUs (0xff) subslice2: 8 EUs (0xff) subslice3: 0 EUs (0x0) slice1: 3 subslice(s) (0x7): subslice0: 8 EUs (0xff) subslice1: 8 EUs (0xff) subslice2: 8 EUs (0xff) subslice3: 0 EUs (0x0) slice2: 3 subslice(s) (0x7): subslice0: 8 EUs (0xff) subslice1: 8 EUs (0xff) subslice2: 8 EUs (0xff) subslice3: 0 EUs (0x0) v2: Reformat debugfs printing (Tvrtko) Use the new EU mask helper (Tvrtko) v3: Move printing code to intel_device_info.c to be shared with error state (Michal) v4: Bump u8 to u16 when using sseu_get_eus() (Lionel) Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180306122857.27317-4-lionel.g.landwerlin@intel.com
2018-03-08drm/i915: store all subslice masksLionel Landwerlin1-3/+59
Up to now, subslice mask was assumed to be uniform across slices. But starting with Cannonlake, slices can be asymmetric (for example slice0 has different number of subslices as slice1+). This change stores all subslices masks for all slices rather than having a single mask that applies to all slices. v2: Rework how we store total numbers in sseu_dev_info (Tvrtko) Fix CHV eu masks, was reading disabled as enabled (Tvrtko) Readability changes (Tvrtko) Add EU index helper (Tvrtko) v3: Turn ALIGN(v, 8) / 8 into DIV_ROUND_UP(v, BITS_PER_BYTE) (Tvrtko) Reuse sseu_eu_idx() for setting eu_mask on CHV (Tvrtko) Reformat debug prints for subslices (Tvrtko) v4: Change eu_mask helper into sseu_set_eus() (Tvrtko) v5: With Haswell reporting masks & counts, bump sseu_*_eus() functions to use u16 (Lionel) v6: Fix sseu_get_eus() for > 8 EUs per subslice (Lionel) v7: Change debugfs enabels for number of subslices per slice, will need a small igt/pm_sseu change (Lionel) Drop subslice_total field from sseu_dev_info, rely on sseu_subslice_total() to recompute the value instead (Lionel) v8: Remove unused function compute_subslice_total() (Lionel) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180306122857.27317-2-lionel.g.landwerlin@intel.com
2018-03-07drm/i915/icl: Enhanced execution list supportThomas Daniel1-0/+1
Enhanced Execlists is an upgraded version of execlists which supports up to 8 ports. The lrcs to be submitted are written to a submit queue (the ExecLists Submission Queue - ELSQ), which is then loaded on the HW. When writing to the ELSP register, the lrcs are written cyclically in the queue from position 0 to position 7. Alternatively, it is possible to write directly in the individual positions of the queue using the ELSQC registers. To be able to re-use all the existing code we're using the latter method and we're currently limiting ourself to only using 2 elements. v2: Rebase. v3: Switch from !IS_GEN11 to GEN < 11 (Daniele Ceraolo Spurio). v4: Use the elsq registers instead of elsp. (Daniele Ceraolo Spurio) v5: Reword commit, rename regs to be closer to specs, turn off preemption (Daniele), reuse engine->execlists.elsp (Chris) v6: use has_logical_ring_elsq to differentiate the new paths v7: add preemption support, rename els to submit_reg (Chris) v8: save the ctrl register inside the execlists struct, drop CSB handling updates (superseded by preempt_complete_status) (Chris) v9: s/drm_i915_gem_request/i915_request (Mika) v10: resolved conflict in inject_preempt_context (Mika) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180302161501.28594-4-mika.kuoppala@linux.intel.com
2018-03-01drm/i915/icl: Prepare for more ringsTvrtko Ursulin1-1/+3
Gen11 will add more VCS and VECS rings so prepare the infrastructure to support that. Bspec: 7021 v2: Rebase. v3: Rebase. v4: Rebase. v5: Rebase. v6: - Update for POR changes. (Daniele Ceraolo Spurio) - Add provisional guc engine ids - to be checked and confirmed. v7: - Rebased. - Added the new ring masks. - Added the new HW ids. v8: - Introduce I915_MAX_VCS/VECS to avoid magic numbers (Michal) v9: increase MAX_ENGINE_INSTANCE to 3 Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180228101153.7224-1-mika.kuoppala@linux.intel.com
2018-02-22drm/i915: Move page sizes out of the 8-bit sandwichTvrtko Ursulin1-2/+2
Slightly smaller code and a bit more logical layout. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180222111658.4999-1-tvrtko.ursulin@linux.intel.com
2018-02-08drm/i915: Move the scheduler feature bits into the purview of the enginesChris Wilson1-0/+7
Rather than having the high level ioctl interface guess the underlying implementation details, having the implementation declare what capabilities it exports. We define an intel_driver_caps, similar to the intel_device_info, which instead of trying to describe the HW gives details on what the driver itself supports. This is then populated by the engine backend for the new scheduler capability field for use elsewhere. v2: Use caps.scheduler for validating CONTEXT_PARAM_SET_PRIORITY (Mika) One less assumption of engine[RCS] \o/ Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tomasz Lis <tomasz.lis@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Tomasz Lis <tomasz.lis@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180207210544.26351-2-chris@chris-wilson.co.uk Reviewed-by: Michel Thierry <michel.thierry@intel.com>
2018-01-19drm/i915/icl: Add initial Icelake definitions.Rodrigo Vivi1-0/+2
Icelake is an Intel® Processor containing an Intel® Graphics Controller. This is just an initial Icelake definition. PCI IDs, Icelake support and new features coming in following patches. v2: Add .ddb_size and .has_guc (Michal Wajdeczko). v3: Add the ICL_FEATURES macro (Kelvin Gardiner). v4 (from Paulo): Add missing __initconst (Paulo) and say "graphics controller" instead of something that looks like an official marketing name but isn't (Chris). Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180111180010.24357-3-paulo.r.zanoni@intel.com
2017-12-22drm/i915: Add pretty printer for runtime part of intel_device_infoMichal Wajdeczko1-0/+2
During initialization of the runtime part of the intel_device_info we are dumping that part using DRM_DEBUG_DRIVER mechanism. As we already have pretty printer for const part of the info, make similar function for the runtime part and use it separately. v2: add runtime dump to debugfs (Chris) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171221185334.17396-7-michal.wajdeczko@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171221215735.30314-6-chris@chris-wilson.co.uk
2017-12-22drm/i915: Update intel_device_info_runtime_init() parameterMichal Wajdeczko1-1/+1
As we try to follow object-verb pattern in our functions, update intel_device_info_runtime_init() parameter from dev_priv to info. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171221185334.17396-6-michal.wajdeczko@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171221215735.30314-5-chris@chris-wilson.co.uk
2017-12-22drm/i915: Move intel_device_info definitions to its own headerMichal Wajdeczko1-0/+181
We already keep intel_device_info functions in dedicated file. Add matching header file and move related definitions there. v2: add gen boundaries (Chris) Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171221185334.17396-5-michal.wajdeczko@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171221215735.30314-4-chris@chris-wilson.co.uk
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.