aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/msm/msm_iommu.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-08-28drm/msm/iommu: optimize map/unmapRob Clark1-15/+86
Using map_pages/unmap_pages cuts down on the # of pgtable walks needed in the process of finding where to insert/remove an entry. The end result is ~5-10x faster than mapping a single page at a time. v2: Rename iommu_pgsize(), drop obsolete comments, fix error handling in msm_iommu_pagetable_map() Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/498892/ Link: https://lore.kernel.org/r/20220823163719.90399-1-robdclark@gmail.com
2022-06-14drm/msm: use for_each_sgtable_sg to iterate over scatterlistJonathan Marek1-1/+1
The dma_map_sgtable() call (used to invalidate cache) overwrites sgt->nents with 1, so msm_iommu_pagetable_map maps only the first physical segment. To fix this problem use for_each_sgtable_sg(), which uses orig_nents. Fixes: b145c6e65eb0 ("drm/msm: Add support to create a local pagetable") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20220613221019.11399-1-jonathan@marek.ca Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-07-27drm/msm: Fix display fault handlingRob Clark1-1/+10
It turns out that when the display is enabled by the bootloader, we can get some transient iommu faults from the display. Which doesn't go over too well when we install a fault handler that is gpu specific. To avoid this, defer installing the fault handler until we get around to setting up per-process pgtables (which is adreno_smmu specific). The arm-smmu fallback error reporting is sufficient for reporting display related faults (and in fact was all we had prior to f8f934c180f629bb927a04fd90d) Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reported-by: Yassine Oudjana <y.oudjana@protonmail.com> Fixes: 2a574cc05d38 ("drm/msm: Improve the a6xx page fault handler") Signed-off-by: Rob Clark <robdclark@chromium.org> Tested-by: John Stultz <john.stultz@linaro.org> Tested-by: Yassine Oudjana <y.oudjana@protonmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210707180113.840741-1-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23drm/msm: devcoredump iommu fault supportRob Clark1-0/+11
Wire up support to stall the SMMU on iova fault, and collect a devcore- dump snapshot for easier debugging of faults. Currently this is a6xx-only, but mostly only because so far it is the only one using adreno-smmu-priv. Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: Jordan Crouse <jordan@cosmicpenguin.net> Link: https://lore.kernel.org/r/20210610214431.539029-6-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-06-23drm/msm: Improve the a6xx page fault handlerJordan Crouse1-1/+10
Use the new adreno-smmu-priv fault info function to get more SMMU debug registers and print the current TTBR0 to debug per-instance pagetables and figure out which GPU block generated the request. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210610214431.539029-4-robdclark@gmail.com Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-12-08iommu/io-pgtable: Remove tlb_flush_leafRobin Murphy1-1/+0
The only user of tlb_flush_leaf is a particularly hairy corner of the Arm short-descriptor code, which wants a synchronous invalidation to minimise the races inherent in trying to split a large page mapping. This is already far enough into "here be dragons" territory that no sensible caller should ever hit it, and thus it really doesn't need optimising. Although using tlb_flush_walk there may technically be more heavyweight than needed, it does the job and saves everyone else having to carry around useless baggage. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Steven Price <steven.price@arm.com> Link: https://lore.kernel.org/r/9844ab0c5cb3da8b2f89c6c2da16941910702b41.1606324115.git.robin.murphy@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2020-10-15Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-2/+206
Pull drm updates from Dave Airlie: "Not a major amount of change, the i915 trees got split into display and gt trees to better facilitate higher level review, and there's a major refactoring of i915 GEM locking to use more core kernel concepts (like ww-mutexes). msm gets per-process pagetables, older AMD SI cards get DC support, nouveau got a bump in displayport support with common code extraction from i915. Outside of drm this contains a couple of patches for hexint moduleparams which you've acked, and a virtio common code tree that you should also get via it's regular path. New driver: - Cadence MHDP8546 DisplayPort bridge driver core: - cross-driver scatterlist cleanups - devm_drm conversions - remove drm_dev_init - devm_drm_dev_alloc conversion ttm: - lots of refactoring and cleanups bridges: - chained bridge support in more drivers panel: - misc new panels scheduler: - cleanup priority levels displayport: - refactor i915 code into helpers for nouveau i915: - split into display and GT trees - WW locking refactoring in GEM - execbuf2 extension mechanism - syncobj timeline support - GEN 12 HOBL display powersaving - Rocket Lake display additions - Disable FBC on Tigerlake - Tigerlake Type-C + DP improvements - Hotplug interrupt refactoring amdgpu: - Sienna Cichlid updates - Navy Flounder updates - DCE6 (SI) support for DC - Plane rotation enabled - TMZ state info ioctl - PCIe DPC recovery support - DC interrupt handling refactor - OLED panel fixes amdkfd: - add SMI events for thermal throttling - SMI interface events ioctl update - process eviction counters radeon: - move to dma_ for allocations - expose sclk via sysfs msm: - DSI support for sm8150/sm8250 - per-process GPU pagetable support - Displayport support mediatek: - move HDMI phy driver to PHY - convert mtk-dpi to bridge API - disable mt2701 tmds tegra: - bridge support exynos: - misc cleanups vc4: - dual display cleanups ast: - cleanups gma500: - conversion to GPIOd API hisilicon: - misc reworks ingenic: - clock handling and format improvements mcde: - DSI support mgag200: - desktop g200 support mxsfb: - i.MX7 + i.MX8M - alpha plane support panfrost: - devfreq support - amlogic SoC support ps8640: - EDID from eDP retrieval tidss: - AM65xx YUV workaround virtio: - virtio-gpu exported resources rcar-du: - R8A7742, R8A774E1 and R8A77961 support - YUV planar format fixes - non-visible plane handling - VSP device reference count fix - Kconfig fix to avoid displaying disabled options in .config" * tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits) drm/ingenic: Fix bad revert drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init drm/amdgpu: Remove warning for virtual_display drm/amdgpu: kfd_initialized can be static drm/amd/pm: setup APU dpm clock table in SMU HW initialization drm/amdgpu: prevent spurious warning drm/amdgpu/swsmu: fix ARC build errors drm/amd/display: Fix OPTC_DATA_FORMAT programming drm/amd/display: Don't allow pstate if no support in blank drm/panfrost: increase readl_relaxed_poll_timeout values MAINTAINERS: Update entry for st7703 driver after the rename Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached" drm/amd/display: HDMI remote sink need mode validation for Linux drm/amd/display: Change to correct unit on audio rate drm/amd/display: Avoid set zero in the requested clk drm/amdgpu: align frag_end to covered address space drm/amdgpu: fix NULL pointer dereference for Renoir drm/vmwgfx: fix regression in thp code due to ttm init refactor. drm/amdgpu/swsmu: add interrupt work handler for smu11 parts drm/amdgpu/swsmu: add interrupt work function ...
2020-09-29Merge tag 'drm-msm-next-2020-09-27' of https://gitlab.freedesktop.org/drm/msm into drm-nextDave Airlie1-1/+205
* DSI support for sm8150/sm8250 * Support for per-process GPU pagetables (finally!) for a6xx. There are still some iommu/arm-smmu changes required to enable, without which it will fallback to the current single pgtable state. The first part (ie. what doesn't depend on drm side patches) is queued up for v5.10[1]. * DisplayPort support. Userspace DP compliance tool support is already merged in IGT[2] * The usual assortment of smaller fixes/cleanups Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvqjuzH=Po_9EzzFsp2Xq3tqJUTKfsA2g09XY7_+6Ypfw@mail.gmail.com
2020-09-12drm/msm: Add support to create a local pagetableJordan Crouse1-1/+198
Add support to create a io-pgtable for use by targets that support per-instance pagetables. In order to support per-instance pagetables the GPU SMMU device needs to have the qcom,adreno-smmu compatible string and split pagetables enabled. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-12drm/msm: Set the global virtual address range from the IOMMU domainJordan Crouse1-0/+7
Use the aperture settings from the IOMMU domain to set up the virtual address range for the GPU. This allows us to transparently deal with IOMMU side features (like split pagetables). Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-09-10drm: msm: fix common struct sg_table related issuesMarek Szyprowski1-1/+1
The Documentation/DMA-API-HOWTO.txt states that the dma_map_sg() function returns the number of the created entries in the DMA address space. However the subsequent calls to the dma_sync_sg_for_{device,cpu}() and dma_unmap_sg must be called with the original number of the entries passed to the dma_map_sg(). struct sg_table is a common structure used for describing a non-contiguous memory buffer, used commonly in the DRM and graphics subsystems. It consists of a scatterlist with memory pages and DMA addresses (sgl entry), as well as the number of scatterlist entries: CPU pages (orig_nents entry) and DMA mapped pages (nents entry). It turned out that it was a common mistake to misuse nents and orig_nents entries, calling DMA-mapping functions with a wrong number of entries or ignoring the number of mapped entries returned by the dma_map_sg() function. To avoid such issues, lets use a common dma-mapping wrappers operating directly on the struct sg_table objects and use scatterlist page iterators where possible. This, almost always, hides references to the nents and orig_nents entries, making the code robust, easier to follow and copy/paste safe. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Rob Clark <robdclark@gmail.com>
2020-05-23drm/msm: Update the MMU helper function APIsJordan Crouse1-2/+2
Instead of using a bare unsigned type for the length value for map/unmap functions pass in a size_t to more correctly match up with the underlying APIs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-05-23drm/msm: Refactor address space initializationJordan Crouse1-0/+3
Refactor how address space initialization works. Instead of having the address space function create the MMU object (and thus require separate but equal functions for gpummu and iommu) use a single function and pass the MMU struct in. Make the generic code cleaner by using target specific functions to create the address space so a2xx can do its own thing in its own space. For all the other targets use a generic helper to initialize IOMMU but leave the door open for newer targets to use customization if they need it. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> [squash in rebase fixups] Signed-off-by: Rob Clark <robdclark@chromium.org>
2020-05-23drm/msm: Attach the IOMMU device during initializationJordan Crouse1-8/+7
Everywhere an IOMMU object is created by msm_gpu_create_address_space the IOMMU device is attached immediately after. Instead of carrying around the infrastructure to do the attach from the device specific code do it directly in the msm_iommu_init() function. This gets it out of the way for more aggressive cleanups that follow. Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> [squash in rebase fixups and fix for unused fxn] Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-10-07drm/msm: Remove unused function argumentsDrew Davenport1-4/+2
The arguments related to IOMMU port name have been unused since commit 944fc36c31ed ("drm/msm: use upstream iommu") and can be removed. Signed-off-by: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-07-15Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-1/+1
Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18drm/msm: Print all 64 bits of the faulting IOMMU addressJordan Crouse1-1/+1
When we move to 64 bit addressing for a5xx and a6xx targets we will start seeing pagefaults at larger addresses so format them appropriately in the log message for easier debugging. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-04-18drm/msm: Remove pm_runtime calls from msm_iommu.cJordan Crouse1-12/+1
Currently the IOMMU code calls pm_runtime_get/put on the GPU or display device before doing a IOMMU operation. This was because usually the IOMMU driver didn't do power control of its own and since the hardware used the same clocks and power as the respective multimedia device it was a easy way to make sure that the power was available. Now two things have changed. First, the SMMU devices can do their own power control and more important bringing up the a6xx GPU isn't as easy as turning on some clocks. To bring the GPU up we need the GMU which itself needs the IOMMU so we have a chicken and egg problem. Luckily this is easily fixed by removing the pm_runtime calls from the functions and letting the device link to the IOMMU device handle the magic. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
2018-12-25Merge tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-2/+1
Pull drm updates from Dave Airlie: "Core: - shared fencing staging removal - drop transactional atomic helpers and move helpers to new location - DP/MST atomic cleanup - Leasing cleanups and drop EXPORT_SYMBOL - Convert drivers to atomic helpers and generic fbdev. - removed deprecated obj_ref/unref in favour of get/put - Improve dumb callback documentation - MODESET_LOCK_BEGIN/END helpers panels: - CDTech panels, Banana Pi Panel, DLC1010GIG, - Olimex LCD-O-LinuXino, Samsung S6D16D0, Truly NT35597 WQXGA, - Himax HX8357D, simulated RTSM AEMv8. - GPD Win2 panel - AUO G101EVN010 vgem: - render node support ttm: - move global init out of drivers - fix LRU handling for ghost objects - Support for simultaneous submissions to multiple engines scheduler: - timeout/fault handling changes to help GPU recovery - helpers for hw with preemption support i915: - Scaler/Watermark fixes - DP MST + powerwell fixes - PSR fixes - Break long get/put shmemfs pages - Icelake fixes - Icelake DSI video mode enablement - Engine workaround improvements amdgpu: - freesync support - GPU reset enabled on CI, VI, SOC15 dGPUs - ABM support in DC - KFD support for vega12/polaris12 - SDMA paging queue on vega - More amdkfd code sharing - DCC scanout on GFX9 - DC kerneldoc - Updated SMU firmware for GFX8 chips - XGMI PSP + hive reset support - GPU reset - DC trace support - Powerplay updates for newer Polaris - Cursor plane update fast path - kfd dma-buf support virtio-gpu: - add EDID support vmwgfx: - pageflip with damage support nouveau: - Initial Turing TU104/TU106 modesetting support msm: - a2xx gpu support for apq8060 and imx5 - a2xx gpummu support - mdp4 display support for apq8060 - DPU fixes and cleanups - enhanced profiling support - debug object naming interface - get_iova/page pinning decoupling tegra: - Tegra194 host1x, VIC and display support enabled - Audio over HDMI for Tegra186 and Tegra194 exynos: - DMA/IOMMU refactoring - plane alpha + blend mode support - Color format fixes for mixer driver rcar-du: - R8A7744 and R8A77470 support - R8A77965 LVDS support imx: - fbdev emulation fix - multi-tiled scalling fixes - SPDX identifiers rockchip - dw_hdmi support - dw-mipi-dsi + dual dsi support - mailbox read size fix qxl: - fix cursor pinning vc4: - YUV support (scaling + cursor) v3d: - enable TFU (Texture Formatting Unit) mali-dp: - add support for linear tiled formats sun4i: - Display Engine 3 support - H6 DE3 mixer 0 support - H6 display engine support - dw-hdmi support - H6 HDMI phy support - implicit fence waiting - BGRX8888 support meson: - Overlay plane support - implicit fence waiting - HDMI 1.4 4k modes bridge: - i2c fixes for sii902x" * tag 'drm-next-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (1403 commits) drm/amd/display: Add fast path for cursor plane updates drm/amdgpu: Enable GPU recovery by default for CI drm/amd/display: Fix duplicating scaling/underscan connector state drm/amd/display: Fix unintialized max_bpc state values Revert "drm/amd/display: Set RMX_ASPECT as default" drm/amdgpu: Fix stub function name drm/msm/dpu: Fix clock issue after bind failure drm/msm/dpu: Clean up dpu_media_info.h static inline functions drm/msm/dpu: Further cleanups for static inline functions drm/msm/dpu: Cleanup the debugfs functions drm/msm/dpu: Remove dpu_irq and unused functions drm/msm: Make irq_postinstall optional drm/msm/dpu: Cleanup callers of dpu_hw_blk_init drm/msm/dpu: Remove unused functions drm/msm/dpu: Remove dpu_crtc_is_enabled() drm/msm/dpu: Remove dpu_crtc_get_mixer_height drm/msm/dpu: Remove dpu_dbg drm/msm: dpu: Remove crtc_lock drm/msm: dpu: Remove vblank_requested flag from dpu_crtc drm/msm: dpu: Separate crtc assignment from vblank enable ...
2018-12-11drm/msm: Remove sgt from the mmu unmap functionJordan Crouse1-2/+1
The scatter gather table doesn't need to be passed in for the MMU unmap function. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-12-03drm/msm: Fix error return checkingWen Yang1-1/+1
The error checks on ret for a negative error return always fails because the return value of iommu_map_sg() is unsigned and can never be negative. Detected with Coccinelle: drivers/gpu/drm/msm/msm_iommu.c:69:9-12: WARNING: Unsigned expression compared with zero: ret < 0 Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> CC: Rob Clark <robdclark@gmail.com> CC: David Airlie <airlied@linux.ie> CC: Julia Lawall <julia.lawall@lip6.fr> CC: linux-arm-msm@vger.kernel.org CC: dri-devel@lists.freedesktop.org CC: freedreno@lists.freedesktop.org CC: linux-kernel@vger.kernel.org Signed-off-by: Sean Paul <seanpaul@chromium.org>
2017-04-08drm/msm: pm runtime support for iommuRob Clark1-1/+14
In particular, attach() and unmap() need pm-runtime get/put to ensure iommu clks are enabled. Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-04-08drm/msm: convert to iommu_map_sgRob Clark1-49/+5
Significantly simplifies things. Also iommu_unmap() can unmap an entire iova range. (If backporting to downstream kernel you might need to revert this. Or at least double check older iommu implementation.) Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-02-06drm/msm: let gpu wire up it's own fault handlerRob Clark1-2/+5
Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-28drm/msm: convert iova to 64bRob Clark1-6/+6
For a5xx the gpu is 64b so we need to change iova to 64b everywhere. On the display side, iova is still 32b so it can ignore the upper bits. (Although all the armv8 devices have an iommu that can map 64b pa to 32b iova.) Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-07-16drm/msm: Print the correct virtual addresses in map/unmap funcsArchit Taneja1-2/+2
The msm_iommu_map/unmap funcs have debug prints to show the list of VA:PA mappings. Use the correct variable to print the VAs. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-07-16drm/msm: Use correct type for physical addressesArchit Taneja1-2/+2
The u32 type used to pass the physical addresses to iommu_map can't accommodate 64 bit addresses. Move to dma_addr_t to ensure wrong addresses aren't provided to the IOMMU driver. Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-03-02drm/msm: make iommu port names const'ierRob Clark1-2/+4
Signed-off-by: Rob Clark <robdclark@gmail.com>
2015-05-14drm/msm: Fix a couple of 64-bit build warningsThierry Reding1-2/+2
Avoid casts from pointers to fixed-size integers to prevent the compiler from warning. Print virtual memory addresses using %p instead. Also turn a couple of %d/%x specifiers into %zu/%zd/%zx to avoid further warnings due to mismatched format strings. Signed-off-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-08-26drm/msm: avoid flood of kernel logs on faultsRob Clark1-2/+2
87e956e9 changed the fault handler to return -ENOSYS, which causes the iommu driver to print out a huge splat. Which wouldn't be quite so bad if nothing ever faulted. But seems like some EXA composite operations generate quite a lot of (seemingly harmless) faults. That is probably a userspace problem, but the huge increase in verbosity from iommu fault dumps makes things kind of unusable. We probably should actually log *some* message (not conditional on drm.debug). But ratelimit it. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-08-04drm/msm: use upstream iommuRob Clark1-28/+3
Downstream kernel IOMMU had a non-standard way of dealing with multiple devices and multiple ports/contexts. We don't need that on upstream kernel, so rip out the crazy. Note that we have to move the pinning of the ringbuffer to after the IOMMU is attached. No idea how that managed to work properly on the downstream kernel. For now, I am leaving the IOMMU port name stuff in place, to simplify things for folks trying to backport latest drm/msm to device kernels. Once we no longer have to care about pre-DT kernels, we can drop this and instead backport upstream IOMMU driver. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-06-22drm/msm: fix IOMMU cleanup for -EPROBE_DEFERStephane Viau1-2/+19
If probe fails after IOMMU is attached, we need to detach in order to clean up properly. Before this change, IOMMU faults would occur if the probe failed (-EPROBE_DEFER). Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-06-22drm/msm: use PAGE_ALIGNED instead of IS_ALIGNED(PAGE_SIZE)Fabian Frederick1-1/+1
use mm.h definition Cc: David Airlie <airlied@linux.ie> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-01-09drm/msm: add a330/apq8x74Rob Clark1-1/+1
Add support for adreno 330. Not too much different, just a few differences in initial configuration plus setting OCMEM base. Userspace support is already in upstream mesa. Note that the existing DT code is simply using the bindings from downstream android kernel, to simplify porting of this driver to existing devices. These do not constitute any committed/stable DT ABI. The addition of proper DT bindings will be a subsequent patch, at which point (as best as possible) I will try to support either upstream bindings or what is found in downstream android kernel, so that existing device DT files can be used. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-01-09drm/msm: add support for non-IOMMU systemsRob Clark1-0/+148
Add a VRAM carveout that is used for systems which do not have an IOMMU. The VRAM carveout uses CMA. The arch code must setup a CMA pool for the device (preferrably in highmem.. a 256m-512m VRAM pool in lowmem is not cool). The user can configure the VRAM pool size using msm.vram module param. Technically, the abstraction of IOMMU behind msm_mmu is not strictly needed, but it simplifies the GEM code a bit, and will be useful later when I add support for a2xx devices with GPUMMU, so I decided to keep this part. It appears to be possible to configure the GPU to restrict access to addresses within the VRAM pool, but this is not done yet. So for now the GPU will refuse to load if there is no sort of mmu. Once address based limits are supported and tested to confirm that we aren't giving the GPU access to arbitrary memory, this restriction can be lifted Signed-off-by: Rob Clark <robdclark@gmail.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.