| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
dev_priv->hw_ddb is only used by skl_update_crtcs, but the ddb
allocation for each pipe is calculated in crtc_state.
We can rid of the global member by looking at crtc_state.
Do this by saving all active old ddb allocations from the old crtc_state
in an array, and then point them to the new allocation every time we update
a crtc.
This will allow us to keep track of the intermediate ddb allocations,
which is what hw_ddb was previously used for. With hw_ddb gone all
SKL-style watermark values are properly maintained only in crtc_state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-5-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Reword commit message.]
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
|
|
kerneldoc expects the comment next to definitions, otherwise it can't
pick up exported vs. internal stuff.
This fixes a warning from the doc build done with:
$ make DOCBOOKS="" htmldocs
Fixes: d8187177b0b1 ("drm: add helper for printing to log or seq_file")
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-8-daniel.vetter@ffwll.ch
|
|
Put the callback docs into struct drm_driver, and the small overview
into a DOC comment.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-7-daniel.vetter@ffwll.ch
|
|
I want to move dumb buffer documentation into the right vfuncs, and
for that I first need to be able to pull that into kerneldoc without
having to clean up all of drmP.h. Also, header-splitting is nice.
While at it shuffle all the function declarations for drm_drv.c into
the right spots, and drop the kerneldoc for drm_minor_acquire/release
since it's only used internally.
v2: Keep all existing copyright notices (Chris).
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
Just code movement, doc cleanup will follow up later.
v2: Keep all the copyright notices.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114115825.22050-2-daniel.vetter@ffwll.ch
|
|
This is the last bit required for making nonblocking modesets work
correctly. The state in intel_crtc->hw_ddb is updated in the
nonblocking part of a nonblocking commit.
This means that even attempting a commit before a nonblocking modeset
completes will fail, because intel_crtc->hw_ddb still has stale values.
The stale values are 0 if the crtc is being enabled resulting in a
failure during atomic check, but it may also result in double use of
ddb allocations.
Fix this by explicitly copying the ddb allocation from the old state.
This has to be done explicitly, because a modeset that doesn't change
active pipes, or a modeset converted to a fastset will will clear the
current state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-4-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Reword commit message.]
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
|
|
The watermark updates for SKL style watermarks are no longer done
in the plane callbacks, but are now called in a separate watermark
update function that's called during the same vblank evasion,
before the plane updates.
This also gets rid of the global skl_results, which was required for
keeping track of the current atomic commit.
Changes since v1:
- Move line unwrap to correct patch. (Lyude)
- Make sure we don't regress ILK watermarks. (Matt)
- Rephrase commit message. (Matt)
Changes since v2:
- Fix disable watermark check to use the correct way to determine single
step watermark support.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lyude <cpaul@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-3-git-send-email-maarten.lankhorst@linux.intel.com
[mlankhorst: Small whitespace fix in skl_initial_wm]
|
|
Allow the driver to write watermarks during atomic evasion.
This will make it possible to write the watermarks in a cleaner
way on gen9+.
intel_atomic_state is not used here yet, but will be used when
we program all watermarks as a separate step during evasion.
This also writes linetime all the time, while before it was only
done during plane updates. This looks like this could be a bugfix,
but I'm not sure what it affects.
Changes since v1:
- Add comment about atomic evasion to commit message.
- Unwrap I915_WRITE call. (Lyude)
Changes since v2:
- Rename atomic_evade_watermarks to atomic_update_watermarks. (Ville)
- Add line wraps where appropriate, fix grammar in commit message. (Matt)
Changes since v3:
- Actually fix commit message. (Matt)
- Line wrap calls to watermark update functions. (Matt)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-2-git-send-email-maarten.lankhorst@linux.intel.com
|
|
Commit 6b5e90f58c56 ("drm/i915/scheduler: Boost priorities for flips")
added priority boosting for the modern atomic pageflips (and modesets),
but we should do the same for existing users of mmioflips (we don't yet
need to consider csflips as they are not used by execlists and so do not
have any support for a scheduler).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161115092249.18356-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
|
|
drm_dev_alloc() never returns NULL, it only returns error pointers on
error.
Fixes: 0a886f59528a ("drm: zte: add initial vou drm driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161115095301.GC15424@mwanda
|
|
virtio-gpu guest driver appearently can run out of buffers.
allocate some extra buffers, as quick stopgap for 4.9.
analyzing root cause and fixing it properly is TBD.
Reported-by: Jiri Slaby <jslaby@suse.cz>
Tested-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The use of drm_cvt_mode() in qxl_add_monitors_config_modes() means that
the resolutions we are going to present to user-space are going to be
rounded down to a multiple of 8. In the QXL arbitrary resolution case,
this is not useful.
This commit forces the actual width/height that was requested by the
client in the drm_display_mode structure rather than keeping the
rounded version.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Message-id: 20161108091209.25568-8-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
When the QXL driver receives a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG interrupt,
we currently always notify userspace that there was some hotplug event.
However, gnome-shell/mutter is reacting to this event by attempting a
resolution change, which it does by issueing drmModeRmFB, drmModeAddFB,
and then drmModeSetCrtc. This has the side-effect of causing
qxl_crtc_mode_set() to tell the QXL virtual hardware that a primary
surface was destroyed and created. After going through QEMU and then the
remote SPICE client, a new identical monitors config message will be
sent, resulting in a QXL_INTERRUPT_CLIENT_MONITORS_CONFIG interrupt to
be emitted, and the same scenario occurring again.
As destroying/creating the primary surface causes a visible screen
flicker, this makes the guest hard to use (
https://bugzilla.redhat.com/show_bug.cgi?id=1266484 ).
This commit checks if the screen configuration we received is the same
one as the current one, and does not notify userspace about it if that's
the case.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-7-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
It's always returning 0, and it's always ignored.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-6-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
qdev->gem.objects was initialized directly in qxl_device_init() rather
than going through qxl_gem_init(), and qxl_gem_fini() was never called.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Message-id: 20161108091209.25568-5-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The message has to be terminated by a newline as it's not going to get
added automatically.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-4-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
qxl_crtc_set_from_monitors_config() is defined in qxl_drv.h but never
implemented.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-3-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
They are not used outside of their respective source file
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Acked-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20161108091209.25568-2-cfergeau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This reverts commit c2cbc38b9715bd8318062e600668fc30e5a3fbfa.
Commit "drm/virtio: fix busid regression" is a better fix.
|
|
Created by commit a325725633c26aa66ab940f762a6b0778edf76c0.
busid changes and userspace is upset.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
We still need it, for virtio-gpu for example.
Partial revert of commit a742946a1ba57e24e8be205ea87224c05b38c380.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
kbuild spotted this error, with drm/msm patches that add a new
modeset-lock in the driver and driver built as a module:
ERROR: "crtc_ww_class" [drivers/gpu/drm/msm/msm.ko] undefined!
Really the only reason for crtc_ww_class not being internal to
drm_modeset_lock.c is that drm_modeset_lock_init() was static-inline
(for no particularly good reason).
Fix that, and move crtc_ww_class into drm_modeset_lock.c.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479163257-18703-1-git-send-email-robdclark@gmail.com
|
|
Remove the common code from the driver and use the
drm_fb_cma_prepare_fb() helper instead.
Moveover, call the helper from prepare_fb() plane hook .
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114100732.3446-2-marex@denx.de
Link: http://patchwork.freedesktop.org/patch/msgid/1476451342-146510-1-git-send-email-dvyukov@google.com
|
|
According to the latest revision of the datasheet, the LVDS I/O pins
must be enabled before starting the PLL. Fix it.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
The VSL and HSL bits in the DSMR register set the corresponding
horizontal and vertical sync signal polarity to active high. The code
got it the wrong way around, fix it.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
There is a bug in the setting of the DES (Display Enable Signal)
register. This current setting occurs 1 dot left shift. The DES
register should be set minus one value about the specifying value
with H/W specification. This patch corrects it.
Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Dot clock routing is setup through different registers depending on the
DU generation. The code has been designed for Gen2 and hasn't been
updated since. This works thanks to good reset default value, but isn't
very safe. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Document the R8A7796-specific DT bindings and support them in the
driver. The HDMI output is currently not supported.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Add support for the R8A7792 DU; it has 2 DPAD (RGB) outputs.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
It isn't safe to call drm_dev_unregister() without first initializing
mode setting with drm_mode_config_init(). This leads to a crash if
either IO memory can't be remapped or vblank initialization fails.
Fix this by reordering the initialization sequence. Move vblank
initialization after the drm_mode_config_init() call, and move IO
remapping before drm_dev_alloc() to avoid the need to perform clean up
in case of failure.
While at it remove the explicit drm_vblank_cleanup() call from
rcar_du_remove() as the drm_dev_unregister() function already cleans up
vblank.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Boost the priority of any rendering required to show the next pageflip
as we want to avoid missing the vblank by being delayed by invisible
workload. We prioritise avoiding jank and jitter in the GUI over
starving background tasks.
v2: Descend dma_fence_array when boosting priorities.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-10-chris@chris-wilson.co.uk
|
|
In order to support userspace defining different levels of importance to
different contexts, and in particular the preferred order of execution,
store a priority value on each context. By default, the kernel's
context, which is used for idling and other background tasks, is given
minimum priority (i.e. all user contexts will execute before the kernel).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-9-chris@chris-wilson.co.uk
|
|
Track the priority of each request and use it to determine the order in
which we submit requests to the hardware via execlists.
The priority of the request is determined by the user (eventually via
the context) but may be overridden at any time by the driver. When we set
the priority of the request, we bump the priority of all of its
dependencies to match - so that a high priority drawing operation is not
stuck behind a background task.
When the request is ready to execute (i.e. we have signaled the submit
fence following completion of all its dependencies, including third
party fences), we put the request into a priority sorted rbtree to be
submitted to the hardware. If the request is higher priority than all
pending requests, it will be submitted on the next context-switch
interrupt as soon as the hardware has completed the current request. We
do not currently preempt any current execution to immediately run a very
high priority request, at least not yet.
One more limitation, is that this is first implementation is for
execlists only so currently limited to gen8/gen9.
v2: Replace recursive priority inheritance bumping with an iterative
depth-first search list.
v3: list_next_entry() for walking lists
v4: Explain how the dfs solves the recursion problem with PI.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-8-chris@chris-wilson.co.uk
|
|
The scheduler needs to know the dependencies of each request for the
lifetime of the request, as it may choose to reschedule the requests at
any time and must ensure the dependency tree is not broken. This is in
additional to using the fence to only allow execution after all
dependencies have been completed.
One option was to extend the fence to support the bidirectional
dependency tracking required by the scheduler. However the mismatch in
lifetimes between the submit fence and the request essentially meant
that we had to build a completely separate struct (and we could not
simply reuse the existing waitqueue in the fence for one half of the
dependency tracking). The extra dependency tracking simply did not mesh
well with the fence, and keeping it separate both keeps the fence
implementation simpler and allows us to extend the dependency tracking
into a priority tree (whilst maintaining support for reordering the
tree).
To avoid the additional allocations and list manipulations, the use of
the priotree is disabled when there are no schedulers to use it.
v2: Create a dedicated slab for i915_dependency.
Rename the lists.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-7-chris@chris-wilson.co.uk
|
|
The start of the scheduler, add a hook into request submission for the
scheduler to see the arrival of new requests and prepare its runqueues.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-6-chris@chris-wilson.co.uk
|
|
The execlist_lock is now completely subsumed by the engine->timeline->lock,
and so we can remove the redundant layer of locking.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-5-chris@chris-wilson.co.uk
|
|
Defer the transfer from the client's timeline onto the execution
timeline from the point of readiness to the point of actual submission.
For example, in execlists, a request is finally submitted to hardware
when the hardware is ready, and only put onto the hardware queue when
the request is ready. By deferring the transfer, we ensure that the
timeline is maintained in retirement order if we decide to queue the
requests onto the hardware in a different order than fifo.
v2: Rebased onto distinct global/user timeline lock classes.
v3: Play with the position of the spin_lock().
v4: Nesting finally resolved with distinct sw_fence lock classes.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-4-chris@chris-wilson.co.uk
|
|
In order to support deferred scheduling, we need to differentiate
between when the request is ready to run (i.e. the submit fence is
signaled) and when the request is actually run (a new execute fence).
This is typically split between the request itself wanting to wait upon
others (for which we use the submit fence) and the CPU wanting to wait
upon the request, for which we use the execute fence to be sure the
hardware is ready to signal completion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-3-chris@chris-wilson.co.uk
|
|
In order to simplify the lockdep annotation, as they become more complex
in the future with deferred execution and multiple paths through the
same functions, create a separate lockclass for the user timeline and
the hardware execution timeline.
We should only ever be locking the user timeline and the execution
timeline in parallel so we only need to create two lock classes, rather
than a separate class for every timeline.
v2: Rename the lock classes to be more consistent with other lockdep.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-2-chris@chris-wilson.co.uk
|
|
Localise the static struct lock_class_key to the caller of
i915_sw_fence_init() so that we create a lock_class instance for each
unique sw_fence rather than all sw_fences sharing the same
lock_class. This eliminate some lockdep false positive when using fences
from within fence callbacks.
For the relatively small number of fences currently in use [2], this adds
160 bytes of unused text/code when lockdep is disabled. This seems
quite high, but fully reducing it via ifdeffery is also quite ugly.
Removing the #fence strings saves 72 bytes with just a single #ifdef.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114204105.29171-1-chris@chris-wilson.co.uk
|
|
On pre-gen4 we connect plane A to pipe B and vice versa to get an FBC
capable plane feeding the LVDS port by default. We have the logic for
the plane swapping duplicated in many places. Let's remove a bit of the
duplication by having the crtc look up the thing from the primary plane.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478616439-10150-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Instead of checking for everything not supporting the limited color
range bit in the DP port register, let's check for the one thing
that does have it (g4x).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479145447-12907-3-git-send-email-ville.syrjala@linux.intel.com
|
|
dp_encoder_is_mst flag in the crtc state can be replaced by
intel_crtc_has_type(..., INTEL_OUTPUT_DP_MST). Let's do that.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479145447-12907-2-git-send-email-ville.syrjala@linux.intel.com
|
|
The primary and sprite planes on CHV pipe B support horizontal
mirroring. Expose it to the world.
Sadly the hardware ignores the mirror bit when the rotate bit is
set, so we'll have to reject the 180+X case.
v2: Drop the BIT()
v3: Pass dev_priv instead of dev to IS_CHERRYVIEW()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479142440-25283-4-git-send-email-ville.syrjala@linux.intel.com
|
|
Move the plane control register rotation setup away from the
coordinate munging code. This will result in neater looking
code once we add reflection support for CHV.
v2: Drop the BIT(), drop some usless parens,
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479142440-25283-3-git-send-email-ville.syrjala@linux.intel.com
|
|
Using == to check for 180 degree rotation only works as long as the
reflection bits aren't set. That will change soon enough for CHV, so
let's stop doing things the wrong way.
v2: Drop the BIT()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479142440-25283-2-git-send-email-ville.syrjala@linux.intel.com
|
|
Because it's shorter, easier to read, newer and cooler. And I don't
think anybody else has pending FBC patches right now, so the conflicts
should be minimal.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478883461-20201-8-git-send-email-paulo.r.zanoni@intel.com
|
|
Use drm_atomic_get_existing_crtc_state() instead of looping through
the CRTC states and checking if the FBC CRTC is there.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478883461-20201-6-git-send-email-paulo.r.zanoni@intel.com
|
|
It only has two checks now, so it makes sense to just move the code to
the caller.
Also take this opportunity to make no_fbc_reason make more sense: now
we'll only list "no suitable CRTC for FBC" instead of maybe giving a
reason why the last CRTC we checked was not selected, and we'll more
consistently set the reason (e.g., if no primary planes are visible).
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478883461-20201-5-git-send-email-paulo.r.zanoni@intel.com
|
|
Extract that part of the code to a new function and call this function
only once during intel_fbc_choose_crtc() instead of once per plane.
Those checks are independent from planes/CRTCs.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478883461-20201-4-git-send-email-paulo.r.zanoni@intel.com
|
Maarten Lankhorst
Daniel Vetter
Chris Wilson
Dan Carpenter
Gerd Hoffmann
Christophe Fergeau
Rob Clark
Marek Vasut
Koji Matsuoka
Laurent Pinchart
Sergei Shtylyov
Ville Syrjälä
Paulo Zanoni