aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses/i2c-stm32f7.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-07-16i2c: stm32: add support for the STM32MP13 socAlain Volmat1-0/+7
Add a new compatible for the stm32mp13. Fast Mode Plus control register address differ from the one for STM32MP15. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-01-14Merge branch 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds1-12/+2
Pull i2c updates from Wolfram Sang: "Mostly driver updates and refactorization. The removal of the XLR driver and the i801 refactoring stand out a little. In the core, we enabled async suspend/resume for I2C controllers and their clients. No issues were reported during the test phase in -next. We will see how this goes for mainline" * 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (54 commits) i2c: sh_mobile: remove unneeded semicolon i2c: riic: Use platform_get_irq() to get the interrupt i2c: sh_mobile: Use platform_get_irq_optional() to get the interrupt i2c: bcm2835: Use platform_get_irq() to get the interrupt i2c: aspeed: Remove unused includes dt-bindings: i2c: aspeed: Drop stray '#interrupt-cells' i2c: sh_mobile: update to new DMAENGINE API when terminating i2c: rcar: update to new DMAENGINE API when terminating i2c: exynos5: Fix getting the optional clock i2c: designware-pci: Convert to use dev_err_probe() i2c: designware-pci: use __maybe_unused for PM functions i2c: designware-pci: Group MODULE_*() macros i2c: designware-pci: Add a note about struct dw_scl_sda_cfg usage i2c: designware-pci: Fix to change data types of hcnt and lcnt parameters i2c: designware: Do not complete i2c read without RX_FULL interrupt eeprom: at24: Add support for 24c1025 EEPROM dt-bindings: at24: add at24c1025 i2c: tegra: use i2c_timings for bus clock freq dt-bindings: at24: Rework special case compatible handling i2c: i801: Don't clear status flags twice in interrupt mode ...
2021-12-01i2c: stm32f7: remove noisy and imprecise log messagesWolfram Sang1-4/+0
The log messages talk about 'bus recovery' while it is not a bus recovery with 9 pulses but merely a controller reset. Controller resets are not worth log messages. The 'bus busy' message should be emitted by upper layers, a busy bus may be expected in some cases. Signed-off-by: Wolfram Sang <wsa@kernel.org> Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
2021-12-01i2c: stm32: get rid of stm32f7_i2c_release_bus return valueAlain Volmat1-8/+2
Function stm32f7_i2c_release_bus is always returning 0, hence it should be a void function. Update the function and remove the return value error checking code in caller functions. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-11-30i2c: stm32f7: use proper DMAENGINE API for terminationAlain Volmat1-5/+11
dmaengine_terminate_all() is deprecated in favor of explicitly saying if it should be sync or async. Here, we use dmaengine_terminate_sync in i2c_xfer and i2c_smbus_xfer handlers and rely on dmaengine_terminate_async within interrupt handlers (transmission error cases). dmaengine_synchronize is added within i2c_xfer and i2c_smbus_xfer handler to finalize terminate started in interrupt handlers. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-11-30i2c: stm32f7: stop dma transfer in case of NACKAlain Volmat1-2/+7
In case of receiving a NACK, the dma transfer should be stopped to avoid feeding data into the FIFO. Also ensure to properly return the proper error code and avoid waiting for the end of the dma completion in case of error happening during the transmission. Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-11-30i2c: stm32f7: recover the bus on access timeoutAlain Volmat1-0/+2
When getting an access timeout, ensure that the bus is in a proper state prior to returning the error. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-11-29i2c: stm32f7: flush TX FIFO upon transfer errorsAlain Volmat1-1/+19
While handling an error during transfer (ex: NACK), it could happen that the driver has already written data into TXDR before the transfer get stopped. This commit add TXDR Flush after end of transfer in case of error to avoid sending a wrong data on any other slave upon next transfer. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-05-25i2c: stm32f7: add SMBus-Alert supportAlain Volmat1-0/+73
Add support for the SMBus-Alert protocol to the STM32F7 that has dedicated control and status logic. If SMBus-Alert is used, the SMBALERT# pin must be configured as alternate function for I2C Alert. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-14i2c: stm32f7: fix reference leak when pm_runtime_get_sync failsQinglang Miao1-6/+6
The PM reference count is not expected to be incremented on return in these stm32f7_i2c_xx serious functions. However, pm_runtime_get_sync will increment the PM reference count even failed. Forgetting to putting operation will result in a reference leak here. Replace it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: ea6dd25deeb5 ("i2c: stm32f7: add PM_SLEEP suspend/resume support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-04-06i2c: stm32f7: avoid ifdef CONFIG_PM_SLEEP for pm callbacksAlain Volmat1-6/+4
Avoid CONFIG_PM preprocessor check for pm suspend/resume callbacks and identify the functions with __maybe_unused. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-03-31i2c: stm32f7: Remove useless error messageTian Tao1-5/+1
Fix the following coccicheck report: drivers/i2c/busses/i2c-stm32f7.c:2032:3-10 : platform_get_irq : line 2032 is redundant because platform_get_irq() already prints an error Remove dev_err() messages after platform_get_irq() failures. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Zihao Tang <tangzihao1@hisilicon.com> Reviewed-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-03-18i2c: stm32f7: indicate the address being accessed on errorsAlain Volmat1-3/+6
To help debugging issues, add the address of the slave being accessed when getting an error. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-03-18i2c: stm32f7: add support for DNF i2c-digital-filter bindingAlain Volmat1-11/+16
Add the support for the i2c-digital-filter binding, allowing to enable the digital filter via the device-tree and indicate its value in the DT. Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-03-18i2c: stm32f7: support DT binding i2c-analog-filterAlain Volmat1-10/+10
Replace driver internally coded enabling/disabling of the analog-filter with the DT binding "i2c-analog-filter". Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-22Merge branch 'i2c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds1-5/+1
Pull i2c updates from Wolfram Sang: - mostly driver updates. Bigger ones for mlxcpld and iproc. But most of them are all over the place. - removal of the efm32, sirf, u300, and zte zx bus drivers because of platform removal. So, we have a pleasant diffstat this time. - first set of cleanups in the I2C core as preparation to increase maximum length of SMBus transfers to 255 (as specified in the new standard). Better documentation of struct i2c_msg and its flags stand out here. - the testunit can now respond to SMBus block process calls which is the testcase when implementing the above new maximum length. * 'i2c/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (62 commits) i2c: remove redundant error print in stm32f7_i2c_probe i2c: testunit: add support for block process calls i2c: busses: Replace spin_lock_irqsave with spin_lock in hard IRQ dt-bindings: eeprom: at24: Document ROHM BR24G01 i2c: i801: Add support for Intel Alder Lake PCH-P i2c: mv64xxx: Fix check for missing clock after adding RPM i2c: mux: mlxcpld: Add callback to notify mux creation completion i2c: mux: mlxcpld: Extend supported mux number i2c: mux: mlxcpld: Extend driver to support word address space devices i2c: mux: mlxcpld: Get rid of adapter numbers enforcement i2c: mux: mlxcpld: Prepare mux selection infrastructure for two-byte support i2c: mux: mlxcpld: Convert driver to platform driver i2c: imx: Synthesize end of transaction events without idle interrupts i2c: i2c-qcom-geni: Add shutdown callback for i2c i2c: mv64xxx: Add runtime PM support i2c: amd-mp2: Remove unused macro i2c: amd-mp2: convert to PCI logging functions i2c: mux: mlxcpld: Move header file out of x86 realm platform/x86: mlxcpld: Update module license i2c: mux: mlxcpld: Update module license ...
2021-02-12i2c: remove redundant error print in stm32f7_i2c_probeMenglong Dong1-5/+1
Coccinelle reports a redundant error print in stm32f7_i2c_probe. As 'platform_get_irq' already prints the error message, error print here is redundant and can be removed. Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2021-02-12i2c: stm32f7: fix configuration of the digital filterAlain Volmat1-1/+10
The digital filter related computation are present in the driver however the programming of the filter within the IP is missing. The maximum value for the DNF is wrong and should be 15 instead of 16. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-11-23PM: sleep: Add dev_wakeup_path() helperPatrice Chotard1-2/+2
Add dev_wakeup_path() helper to avoid to spread dev->power.wakeup_path test in drivers. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-21i2c: stm32: Simplify with dev_err_probe()Krzysztof Kozlowski1-9/+5
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and the error value gets printed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-21i2c: stm32: fix error message on upon dma_request_chan & defer handlingAlain Volmat1-7/+6
DMA usage is optional for the I2C driver. check for the -ENODEV error in order to avoid displaying an error when no DMA has been requested. Cleaning up the error messages during probe, remove the additional -EPROBE_DEFER within probe function since additional error message doesn't give much more information than what is already reported within the stm32_i2c_dma_request function. Signed-off-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: stm32: name slave slot to ease maintenanceAlain Volmat1-8/+14
Name slave slots in order to ease code maintenance. Signed-off-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-09-18i2c: stm32f7: Add SMBus Host-Notify protocol supportAlain Volmat1-16/+96
Rely on the core functions to implement the host-notify protocol via the a I2C slave device. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-04-30i2c: stm32f7: prevent array underflow in stm32f7_get_lower_rate()Dan Carpenter1-1/+1
We want to break with "i" set to zero whether we find the rate we want or not. In the current code, if we don't find the rate we want then it exits the loop with "i" set to -1 and results in an array underflow. Fixes: 09cc9a3bce91 ("i2c: stm32f7: allows for any bus frequency") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-26i2c: stm32f7: allows for any bus frequencyAlain Volmat1-61/+64
Do not limitate to the 3 (100KHz, 400KHz, 1MHz) bus frequency but instead allows any frequency (if it matches timing requirements). Depending on the requested frequency, use the spec data from either Standard, Fast or Fast Plus mode. Hardcoding of min/max bus frequencies is removed and is instead computed. The driver do not use anymore speed identifier but instead handle directly the frequency and figure out the spec data (necessary for the computation of the timing register) based on the frequency. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-26i2c: stm32: don't print an error on probe deferralEtienne Carriere1-2/+5
Do not print an error trace when deferring probe for some resource. Fix as well the error message in case of tx dma_request_chan failure. Signed-off-by: Etienne Carriere <etienne.carriere@st.com> Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: i2c-stm32f7: improve nack debug messageFabrice Gasnier1-1/+2
Add information on slave addr in the nack debug message. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-04-15i2c: busses: convert to devm_platform_get_and_ioremap_resourceDejin Zheng1-2/+1
use devm_platform_get_and_ioremap_resource() to simplify code, which contains platform_get_resource() and devm_ioremap_resource(), it also get the resource for use by the following code. Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-24i2c: stm32f7: switch to I²C generic property parsingAndy Shevchenko1-31/+26
Switch to the new generic functions: i2c_parse_fw_timings(). While here, replace hard coded values with standard bus frequency definitions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-13i2c: stm32f7: do not backup read-only PECR registerAlain Volmat1-4/+0
The PECR register provides received packet computed PEC value.  It makes no sense restoring its value after a reset, and anyway, as read-only register it cannot be restored. Fixes: ea6dd25deeb5 ("i2c: stm32f7: add PM_SLEEP suspend/resume support") Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: stm32f7: add a new st, stm32mp15-i2c compatibleAlain Volmat1-6/+33
Add a new stm32mp15 specific compatible to handle FastMode+ registers handling which is different on the stm32mp15 compared to the stm32f7 or stm32h7. Indeed, on the stm32mp15, the FastMode+ set and clear registers are separated while on the other platforms (F7 or H7) the control is done in a unique register. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-03-10i2c: stm32f7: disable/restore Fast Mode Plus bits in low power modesAlain Volmat1-13/+39
Defer the initial enabling of the Fast Mode Plus bits after the stm32f7_i2c_setup_timing call in probe function in order to avoid enabling them if speed is downgraded. Clear & restore the Fast Mode Plus bits in the suspend/resume handlers of the driver. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-02-26i2c: stm32f7: allow controller to be wakeup-sourceAlain Volmat1-21/+86
Allow the i2c-stm32f7 controller to become a wakeup-source of the system. In such case, when a slave is registered to the I2C controller, receiving a I2C message targeting that registered slave address wakes up the suspended system. In order to be able to wake-up, the I2C controller DT node must have the property wakeup-source defined and a slave must be registered. Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2020-01-30i2c: stm32f7: add PM_SLEEP suspend/resume supportAlain Volmat1-4/+113
Backup/restore I2C registers as part of the suspend/resume handlers. The device is marked as suspended to ensure that transfers are rejected during the suspended period. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Alain Volmat <alain.volmat@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-12-01Merge branch 'i2c/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds1-9/+23
Pull i2c updates from Wolfram Sang: "I2C has mostly driver updates this time. The few noteworthy changes are: the core has now support for analog and digital filters with at91 being the first user, a core addition to replace the NULL returning i2c_new_probed_device() with an ERR_PTR variant, and the pxa driver has finally being moved to use the generic I2C slave interface. We have quite a significant number of reviews per patch this time, so thank you to all involved!" * 'i2c/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) video: fbdev: matrox: convert to i2c_new_scanned_device i2c: icy: convert to i2c_new_scanned_device i2c: replace i2c_new_probed_device with an ERR_PTR variant i2c: Fix Kconfig indentation i2c: smbus: Don't filter out duplicate alerts i2c: i801: Correct Intel Jasper Lake SOC naming i2c: i2c-stm32f7: fix 10-bits check in slave free id search loop i2c: iproc: Add i2c repeated start capability i2c: remove helpers for ref-counting clients i2c: tegra: Use dma_request_chan() directly for channel request i2c: sh_mobile: Use dma_request_chan() directly for channel request i2c: qup: Use dma_request_chan() directly for channel request i2c: at91: Use dma_request_chan() directly for channel request i2c: rcar: Remove superfluous call to clk_get_rate() i2c: pxa: remove unused i2c-slave APIs i2c: pxa: migrate to new i2c_slave APIs i2c: cros-ec-tunnel: Make the device acpi compatible i2c: stm32f7: report dma error during probe i2c: icy: no need to populate address for scanned device i2c: xiic: Fix kerneldoc warnings ...
2019-11-25i2c: i2c-stm32f7: fix 10-bits check in slave free id search loopAlain Volmat1-1/+1
Fix a typo in the free slave id search loop. Instead of I2C_CLIENT_PEC, it should have been I2C_CLIENT_TEN. The slave id 1 can only handle 7-bit addresses and thus is not eligible in case of 10-bit addresses. As a matter of fact none of the slave id support I2C_CLIENT_PEC, overall check is performed at the beginning of the stm32f7_i2c_reg_slave function. Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support") Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-11-11i2c: stm32f7: report dma error during probeAlain Volmat1-0/+9
Distinguish between the case where dma information is not provided within the DT and the case of an error during the dma init. Exit the probe with error in case of an error during dma init. Fixes: bb8822cbbc53 ("i2c: i2c-stm32: Add generic DMA API") Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-11-11i2c: stm32f7: fix & reorder remove & probe error handlingAlain Volmat1-7/+12
Add missing dma channels free calls in case of error during probe and reorder the remove function so that dma channels are freed after the i2c adapter is deleted. Overall, reorder the remove function so that probe error handling order and remove function order are same. Fixes: 7ecc8cfde553 ("i2c: i2c-stm32f7: Add DMA support") Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-26i2c: stm32f7: rework slave_id allocationAlain Volmat1-1/+1
The IP can handle two slave addresses. One address can either be 7 bits or 10 bits while the other can only be 7 bits. In order to ensure that a 10 bits address can always be allocated (assuming there is only one 7 bits address already allocated), pick up the 7-bits only address slot in priority when performing a 7-bits address allocation. Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support") Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24i2c: stm32f7: remove warning when compiling with W=1Alain Volmat1-1/+1
Remove the following warning: drivers/i2c/busses/i2c-stm32f7.c:315: warning: cannot understand function prototype: 'struct stm32f7_i2c_spec i2c_specs[] = Replace a comment starting with /** by simply /* to avoid having it interpreted as a kernel-doc comment. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Alain Volmat <alain.volmat@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24i2c: stm32f7: fix a race in slave mode with arbitration loss irqFabrice Gasnier1-7/+10
When in slave mode, an arbitration loss (ARLO) may be detected before the slave had a chance to detect the stop condition (STOPF in ISR). This is seen when two master + slave adapters switch their roles. It provokes the i2c bus to be stuck, busy as SCL line is stretched. - the I2C_SLAVE_STOP event is never generated due to STOPF flag is set but don't generate an irq (race with ARLO irq, STOPIE is masked). STOPF flag remains set until next master xfer (e.g. when STOPIE irq get unmasked). In this case, completion is generated too early: immediately upon new transfer request (then it doesn't send all data). - Some data get stuck in TXDR register. As a consequence, the controller stretches the SCL line: the bus gets busy until a future master transfer triggers the bus busy / recovery mechanism (this can take time... and may never happen at all) So choice is to let the STOPF being detected by the slave isr handler, to properly handle this stop condition. E.g. don't mask IRQs in error handler, when the slave is running. Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-10-24i2c: stm32f7: fix first byte to send in slave modeFabrice Gasnier1-0/+2
The slave-interface documentation [1] states "the bus driver should transmit the first byte" upon I2C_SLAVE_READ_REQUESTED slave event: - 'val': backend returns first byte to be sent The driver currently ignores the 1st byte to send on this event. [1] https://www.kernel.org/doc/Documentation/i2c/slave-interface Fixes: 60d609f30de2 ("i2c: i2c-stm32f7: Add slave support") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-09-04i2c: stm32f7: Make structure stm32f7_i2c_algo constantNishka Dasgupta1-1/+1
Static structure stm32f7_i2c_algo, of type i2c_algorithm, is used only when it is assigned to constant field algo of a variable having type i2c_adapter. As stm32f7_i2c_algo is therefore never modified, make it const as well to protect it from unintended modification. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Acked-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-06-29i2c: i2c-stm32f7: Add I2C_SMBUS_I2C_BLOCK_DATA supportFabrice Gasnier1-1/+5
This patch adds the support of I2C_SMBUS_I2C_BLOCK_DATA transaction type for the stm32f7 SMBUS Controller. Use emulated I2C_SMBUS_I2C_BLOCK_DATA transactions as there is no specific hardware in STM32 I2C to manage this (e.g. like no need for PEC here). Emulated transfer will fall back calling i2c transfer method where there's already support for DMAs for example. So, use the I2C_FUNC_SMBUS_I2C_BLOCK in stm32f7_i2c_func(), and rely on emulated transfer by returning -EOPNOTSUPP in the smbus_xfer() routine for such a case. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-06-21i2c: stm32f7: fix the get_irq error casesFabrice Gasnier1-12/+14
During probe, return the "get_irq" error value instead of -EINVAL which allows the driver to be deferred probed if needed. Fix also the case where of_irq_get() returns a negative value. Note : On failure of_irq_get() returns 0 or a negative value while platform_get_irq() returns a negative value. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-20i2c: i2c-stm32f7: improve loopback in timing algorithmNicolas Le Bayon1-0/+4
This avoids useless loops inside the I2C timing algorithm. Actually, we support only one possible solution per prescaler value. So after finding a solution with a prescaler, the algorithm can switch directly to the next prescaler value. Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com> Signed-off-by: Bich Hemon <bich.hemon@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-12i2c: i2c-stm32f7: Fix SDADEL minimum formulaNicolas Le Bayon1-1/+1
It conforms with Reference Manual I2C timing section. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com> Signed-off-by: Bich Hemon <bich.hemon@st.com> Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-12-01i2c: i2c-stm32f7: add PM Runtime supportPierre-Yves MORDRET1-43/+101
Use PM Runtime API to enable/disable clock Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-11-27i2c: stm32f7: SYSCFG Fast Mode Plus support for I2C STM32F7Pierre-Yves MORDRET1-3/+35
Read SYSCFG bindings to set Fast Mode Plus bits if Fast Mode Plus speed is selected. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-17i2c: stm32f7: fix documentation typoPierre-Yves MORDRET1-3/+4
Some data structure members were either misspelled or missing. Fixes: aeb068c572 ("i2c: i2c-stm32f7: add driver") Fixes: 380b8a85e7 ("i2c: i2c-stm32f7: Add initial SMBus protocols support") Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.