aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/i2c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-08-09i2c: xlp9xx: Fix case where SSIF read transaction completes earlyGeorge Cherian1-13/+28
During ipmi stress tests we see occasional failure of transactions at the boot time. This happens in the case of a I2C_M_RECV_LEN transactions, when the read transfer completes (with the initial read length of 34) before the driver gets a chance to handle interrupts. The current driver code expects at least 2 interrupts for I2C_M_RECV_LEN transactions. The length is updated during the first interrupt, and the buffer contents are only copied during subsequent interrupts. In case of just one interrupt, we will complete the transaction without copying out the bytes from RX fifo. Update the code to drain the RX fifo after the length update, so that the transaction completes correctly in all cases. Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-07-30Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds2-3/+3
Pull locking fixes from Ingo Molnar: "A paravirt UP-patching fix, and an I2C MUX driver lockdep warning fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/pvqspinlock/x86: Use LOCK_PREFIX in __pv_queued_spin_unlock() assembly code i2c/mux, locking/core: Annotate the nested rt_mutex usage locking/rtmutex: Allow specifying a subclass for nested locking
2018-07-25i2c/mux, locking/core: Annotate the nested rt_mutex usagePeter Rosin2-3/+3
If an i2c topology has instances of nested muxes, then a lockdep splat is produced when when i2c_parent_lock_bus() is called. Here is an example: ============================================ WARNING: possible recursive locking detected -------------------------------------------- insmod/68159 is trying to acquire lock: (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux] but task is already holding lock: (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(i2c_register_adapter#2); lock(i2c_register_adapter#2); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by insmod/68159: #0: (i2c_register_adapter#2){+.+.}, at: i2c_parent_lock_bus+0x32/0x50 [i2c_mux] stack backtrace: CPU: 13 PID: 68159 Comm: insmod Tainted: G O Call Trace: dump_stack+0x67/0x98 __lock_acquire+0x162e/0x1780 lock_acquire+0xba/0x200 rt_mutex_lock+0x44/0x60 i2c_parent_lock_bus+0x32/0x50 [i2c_mux] i2c_parent_lock_bus+0x3e/0x50 [i2c_mux] i2c_smbus_xfer+0xf0/0x700 i2c_smbus_read_byte+0x42/0x70 my2c_init+0xa2/0x1000 [my2c] do_one_initcall+0x51/0x192 do_init_module+0x62/0x216 load_module+0x20f9/0x2b50 SYSC_init_module+0x19a/0x1c0 SyS_init_module+0xe/0x10 do_syscall_64+0x6c/0x1a0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Reported-by: John Sperbeck <jsperbeck@google.com> Tested-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Deepa Dinamani <deepadinamani@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Chang <dpf@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Wolfram Sang <wsa@the-dreams.de> Link: http://lkml.kernel.org/r/20180720083914.1950-3-peda@axentia.se Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-24i2c: imx: use open drain for recovery GPIOWolfram Sang1-1/+1
I2C is open drain, so request the GPIO accordingly, even if pinmux did set it up correctly for in-kernel users in this case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-07-24i2c: rcar: handle RXDMA HW behaviour on Gen3Wolfram Sang1-3/+51
On Gen3, we can only do RXDMA once per transfer reliably. For that, we must reset the device, then we can have RXDMA once. This patch implements this. When there is no reset controller or the reset fails, RXDMA will be blocked completely. Otherwise, it will be disabled after the first RXDMA transfer. Based on a commit from the BSP by Hiromitsu Yamasaki, yet completely refactored to handle multiple read messages within one transfer. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-07-23i2c: imx: Fix reinit_completion() useEsben Haabendal1-2/+1
Make sure to call reinit_completion() before dma is started to avoid race condition where reinit_completion() is called after complete() and before wait_for_completion_timeout(). Signed-off-by: Esben Haabendal <eha@deif.com> Fixes: ce1a78840ff7 ("i2c: imx: add DMA support for freescale i2c driver") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-07-23i2c: davinci: Avoid zero value of CLKHAlexander Sverdlin1-2/+6
If CLKH is set to 0 I2C clock is not generated at all, so avoid this value and stretch the clock in this case. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-07-13Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds3-11/+19
Pull i2c fixes from Wolfram Sang: - I2C core bugfix regarding bus recovery - driver bugfix for the tegra driver - typo correction * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: recovery: if possible send STOP with recovery pulses i2c: tegra: Fix NACK error handling i2c: stu300: use non-archaic spelling of failes
2018-07-12i2c: recovery: if possible send STOP with recovery pulsesWolfram Sang1-1/+10
I2C clients may misunderstand recovery pulses if they can't read SDA to bail out early. In the worst case, as a write operation. To avoid that and if we can write SDA, try to send STOP to avoid the misinterpretation. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-07-10i2c: tegra: Fix NACK error handlingJon Hunter1-9/+8
On Tegra30 Cardhu the PCA9546 I2C mux is not ACK'ing I2C commands on resume from suspend (which is caused by the reset signal for the I2C mux not being configured correctl). However, this NACK is causing the Tegra30 to hang on resuming from suspend which is not expected as we detect NACKs and handle them. The hang observed appears to occur when resetting the I2C controller to recover from the NACK. Commit 77821b4678f9 ("i2c: tegra: proper handling of error cases") added additional error handling for some error cases including NACK, however, it appears that this change conflicts with an early fix by commit f70893d08338 ("i2c: tegra: Add delay before resetting the controller after NACK"). After commit 77821b4678f9 was made we now disable 'packet mode' before the delay from commit f70893d08338 happens. Testing shows that moving the delay to before disabling 'packet mode' fixes the hang observed on Tegra30. The delay was added to give the I2C controller chance to send a stop condition and so it makes sense to move this to before we disable packet mode. Please note that packet mode is always enabled for Tegra. Fixes: 77821b4678f9 ("i2c: tegra: proper handling of error cases") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@vger.kernel.org
2018-07-03i2c: stu300: use non-archaic spelling of failesThadeu Lima de Souza Cascardo1-1/+1
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-07-02i2c-cht-wc: Fix bq24190 supplierHans de Goede1-1/+2
Commit f2a8aa053c17 ("typec: tcpm: Represent source supply through power_supply") moved the code to register a power_supply representing the device supplying power to the type-C connector, from the fusb302 code to the generic tcpm code. This has caused the power-supply registered by the fusb302 driver, which determines how much current the bq24190 can draw, to change name from "fusb302-typec-source" to "tcpm-source-psy-i2c-fusb302". Fixes: f2a8aa053c17 ("typec: tcpm: Represent source supply through...") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-29i2c: gpio: initialize SCL to HIGH againWolfram Sang1-2/+2
It seems that during the conversion from gpio* to gpiod*, the initial state of SCL was wrongly switched to LOW. Fix it to be HIGH again. Fixes: 7bb75029ef34 ("i2c: gpio: Enforce open drain through gpiolib") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-06-29i2c: smbus: kill memory leak on emulated and failed DMA SMBus xfersPeter Rosin1-5/+9
If DMA safe memory was allocated, but the subsequent I2C transfer fails the memory is leaked. Plug this leak. Fixes: 8a77821e74d6 ("i2c: smbus: use DMA safe buffers for emulated SMBus transactions") Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-06-29i2c: algos: bit: mention our experience about initial statesWolfram Sang1-0/+5
So, if somebody wants to re-implement this in the future, we pinpoint to a problem case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-06-29Revert "i2c: algo-bit: init the bus to a known state"Wolfram Sang1-5/+0
This reverts commit 3e5f06bed72fe72166a6778f630241a893f67799. As per bugzilla #200045, this caused a regression. I don't really see a way to fix it without having the hardware. So, revert the patch and I will fix the issue I was seeing originally in the i2c-gpio driver itself. I couldn't find new users of this algorithm since, so there should be no one depending on the new behaviour. Reported-by: Sergey Larin <cerg2010cerg2010@mail.ru> Fixes: 3e5f06bed72f ("i2c: algo-bit: init the bus to a known state") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Sergey Larin <cerg2010cerg2010@mail.ru> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2018-06-14Merge branch 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds58-386/+1592
Pull i2c updates from Wolfram Sang: - mainly feature additions to drivers (stm32f7, qup, xlp9xx, mlxcpld, ...) - conversion to use the i2c_8bit_addr_from_msg macro consistently - move includes to platform_data - core updates to allow the (still in review) I3C subsystem to connect - and the regular share of smaller driver updates * 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (68 commits) i2c: qup: fix building without CONFIG_ACPI i2c: tegra: Remove suspend-resume i2c: imx-lpi2c: Switch to SPDX identifier i2c: mxs: Switch to SPDX identifier i2c: busses: make use of i2c_8bit_addr_from_msg i2c: algos: make use of i2c_8bit_addr_from_msg i2c: rcar: document R8A77980 bindings i2c: qup: Add command-line parameter to override SCL frequency i2c: qup: Correct duty cycle for FM and FM+ i2c: qup: Add support for Fast Mode Plus i2c: qup: add probe path for Centriq ACPI devices i2c: robotfuzz-osif: drop pointless test i2c: robotfuzz-osif: remove pointless local variable i2c: rk3x: Don't print visible virtual mapping MMIO address i2c: opal: don't check number of messages in the driver i2c: ibm_iic: don't check number of messages in the driver i2c: imx: Switch to SPDX identifier i2c: mux: pca954x: merge calls to of_match_device and of_device_get_match_data i2c: mux: demux-pinctrl: use proper parent device for demux adapter i2c: mux: improve error message for failed symlink ...
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook3-10/+11
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook4-7/+8
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-05Merge tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds1-2/+1
Pull USB and PHY updates from Greg KH: "Here is the big USB pull request for 4.18-rc1. Lots of stuff here, the highlights are: - phy driver updates and new additions - usual set of xhci driver updates - normal set of musb updates - gadget driver updates and new controllers - typec work, it's getting closer to getting fully out of the staging portion of the tree. - lots of minor cleanups and bugfixes. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) Revert "xhci: Reset Renesas uPD72020x USB controller for 32-bit DMA issue" xhci: Add quirk to zero 64bit registers on Renesas PCIe controllers xhci: Allow more than 32 quirks usb: xhci: force all memory allocations to node selftests: add test for USB over IP driver USB: typec: fsusb302: no need to check return value of debugfs_create_dir() USB: gadget: udc: s3c2410_udc: no need to check return value of debugfs_create functions USB: gadget: udc: renesas_usb3: no need to check return value of debugfs_create functions USB: gadget: udc: pxa27x_udc: no need to check return value of debugfs_create functions USB: gadget: udc: gr_udc: no need to check return value of debugfs_create functions USB: gadget: udc: bcm63xx_udc: no need to check return value of debugfs_create functions USB: udc: atmel_usba_udc: no need to check return value of debugfs_create functions USB: dwc3: no need to check return value of debugfs_create functions USB: dwc2: no need to check return value of debugfs_create functions USB: core: no need to check return value of debugfs_create functions USB: chipidea: no need to check return value of debugfs_create functions USB: ehci-hcd: no need to check return value of debugfs_create functions USB: fhci-hcd: no need to check return value of debugfs_create functions USB: fotg210-hcd: no need to check return value of debugfs_create functions USB: imx21-hcd: no need to check return value of debugfs_create functions ...
2018-06-05Merge tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds1-1/+1
Pull power management updates from Rafael Wysocki: "These include a significant update of the generic power domains (genpd) and Operating Performance Points (OPP) frameworks, mostly related to the introduction of power domain performance levels, cpufreq updates (new driver for Qualcomm Kryo processors, updates of the existing drivers, some core fixes, schedutil governor improvements), PCI power management fixes, ACPI workaround for EC-based wakeup events handling on resume from suspend-to-idle, and major updates of the turbostat and pm-graph utilities. Specifics: - Introduce power domain performance levels into the the generic power domains (genpd) and Operating Performance Points (OPP) frameworks (Viresh Kumar, Rajendra Nayak, Dan Carpenter). - Fix two issues in the runtime PM framework related to the initialization and removal of devices using device links (Ulf Hansson). - Clean up the initialization of drivers for devices in PM domains (Ulf Hansson, Geert Uytterhoeven). - Fix a cpufreq core issue related to the policy sysfs interface causing CPU online to fail for CPUs sharing one cpufreq policy in some situations (Tao Wang). - Make it possible to use platform-specific suspend/resume hooks in the cpufreq-dt driver and make the Armada 37xx DVFS use that feature (Viresh Kumar, Miquel Raynal). - Optimize policy transition notifications in cpufreq (Viresh Kumar). - Improve the iowait boost mechanism in the schedutil cpufreq governor (Patrick Bellasi). - Improve the handling of deferred frequency updates in the schedutil cpufreq governor (Joel Fernandes, Dietmar Eggemann, Rafael Wysocki, Viresh Kumar). - Add a new cpufreq driver for Qualcomm Kryo (Ilia Lin). - Fix and clean up some cpufreq drivers (Colin Ian King, Dmitry Osipenko, Doug Smythies, Luc Van Oostenryck, Simon Horman, Viresh Kumar). - Fix the handling of PCI devices with the DPM_SMART_SUSPEND flag set and update stale comments in the PCI core PM code (Rafael Wysocki). - Work around an issue related to the handling of EC-based wakeup events in the ACPI PM core during resume from suspend-to-idle if the EC has been put into the low-power mode (Rafael Wysocki). - Improve the handling of wakeup source objects in the PM core (Doug Berger, Mahendran Ganesh, Rafael Wysocki). - Update the driver core to prevent deferred probe from breaking suspend/resume ordering (Feng Kan). - Clean up the PM core somewhat (Bjorn Helgaas, Ulf Hansson, Rafael Wysocki). - Make the core suspend/resume code and cpufreq support the RT patch (Sebastian Andrzej Siewior, Thomas Gleixner). - Consolidate the PM QoS handling in cpuidle governors (Rafael Wysocki). - Fix a possible crash in the hibernation core (Tetsuo Handa). - Update the rockchip-io Adaptive Voltage Scaling (AVS) driver (David Wu). - Update the turbostat utility (fixes, cleanups, new CPU IDs, new command line options, built-in "Low Power Idle" counters support, new POLL and POLL% columns) and add an entry for it to MAINTAINERS (Len Brown, Artem Bityutskiy, Chen Yu, Laura Abbott, Matt Turner, Prarit Bhargava, Srinivas Pandruvada). - Update the pm-graph to version 5.1 (Todd Brandt). - Update the intel_pstate_tracer utility (Doug Smythies)" * tag 'pm-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (128 commits) tools/power turbostat: update version number tools/power turbostat: Add Node in output tools/power turbostat: add node information into turbostat calculations tools/power turbostat: remove num_ from cpu_topology struct tools/power turbostat: rename num_cores_per_pkg to num_cores_per_node tools/power turbostat: track thread ID in cpu_topology tools/power turbostat: Calculate additional node information for a package tools/power turbostat: Fix node and siblings lookup data tools/power turbostat: set max_num_cpus equal to the cpumask length tools/power turbostat: if --num_iterations, print for specific number of iterations tools/power turbostat: Add Cannon Lake support tools/power turbostat: delete duplicate #defines x86: msr-index.h: Correct SNB_C1/C3_AUTO_UNDEMOTE defines tools/power turbostat: Correct SNB_C1/C3_AUTO_UNDEMOTE defines tools/power turbostat: add POLL and POLL% column tools/power turbostat: Fix --hide Pk%pc10 tools/power turbostat: Build-in "Low Power Idle" counters support tools/power turbostat: Don't make man pages executable tools/power turbostat: remove blank lines tools/power turbostat: a small C-states dump readability immprovement ...
2018-06-04Merge branch 'pm-domains'Rafael J. Wysocki1-1/+1
* pm-domains: PM / domains: Improve wording of dev_pm_domain_attach() comment PM / Domains: Don't return -EEXIST at attach when PM domain exists spi: Respect all error codes from dev_pm_domain_attach() soundwire: Respect all error codes from dev_pm_domain_attach() mmc: sdio: Respect all error codes from dev_pm_domain_attach() i2c: Respect all error codes from dev_pm_domain_attach() driver core: Respect all error codes from dev_pm_domain_attach() amba: Respect all error codes from dev_pm_domain_attach() PM / Domains: Allow a better error handling of dev_pm_domain_attach() PM / Domains: Check for existing PM domain in dev_pm_domain_attach() PM / Domains: Drop redundant code in genpd while attaching devices PM / Domains: Drop comment in genpd about legacy Samsung DT binding PM / Domains: Fix error path during attach in genpd
2018-05-31i2c: qup: fix building without CONFIG_ACPIArnd Bergmann1-2/+0
The added Centriq support broke compilation with CONFIG_ACPI disabled: drivers/i2c/busses/i2c-qup.c: In function 'qup_i2c_probe': drivers/i2c/busses/i2c-qup.c:1707:25: error: 'qup_i2c_acpi_match' undeclared (first use in this function); did you mean 'qup_i2c_recv_data'? This fixes it by removing the extraneous #ifdef. All ACPI specific code will be dropped implicitly when that option is disabled, but the compiler first needs to see it. Fixes: 902a91a02bdf ("i2c: qup: add probe path for Centriq ACPI devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Austin Christ <austinwc@codeaurora.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-30i2c: tegra: Remove suspend-resumeDmitry Osipenko1-33/+0
Nothing prevents I2C clients to access I2C while Tegra's driver is being suspended, this results in -EBUSY error returned to the clients and that may have unfortunate consequences. In particular this causes problems for the TPS6586x MFD driver which emits hundreds of "failed to read interrupt status" error messages on resume from suspend. This happens if TPS6586X is used to wake system from suspend by the expired RTC alarm timer because TPS6586X is an I2C device driver and its IRQ handler reads the status register while Tegra's I2C driver is suspended, i.e. just after kernel enabled IRQ's during of resume-from-suspend process. Note that the removed tegra_i2c_resume() invoked tegra_i2c_init() which performs HW reset. That seems was also not entirely correct because moving tegra_i2c_resume to an earlier stage of resume-from-suspend process causes I2C transfer to fail in the case of TPS6586X. It is fine to remove the HW-reinitialization for now because it should be only needed in a case of using lowest power-mode during suspend, which upstream kernel doesn't support. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-30i2c: imx-lpi2c: Switch to SPDX identifierFabio Estevam1-11/+1
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-30i2c: mxs: Switch to SPDX identifierFabio Estevam1-6/+1
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-30Merge branch 'i2c-mux/for-next' of https://github.com/peda-r/i2c-mux into i2c/for-4.18Wolfram Sang5-16/+20
This time around we have mostly trivial changes. However, there are also a couple of "real" patches improving a few aspects of the demux-pinctrl behavior and we also actually reset pca954x chips on probe when we have the ability to do so.
2018-05-29i2c: busses: make use of i2c_8bit_addr_from_msgPeter Rosin18-70/+47
Because it looks neater. For diolan, this allows factoring out some code that is now common between if and else. For eg20t, pch_i2c_writebytes is always called with a write in msgs->flags, and pch_i2c_readbytes with a read. For imx, i2c_imx_dma_write and i2c_imx_write are always called with a write in msgs->flags, and i2c_imx_read with a read. For qup, qup_i2c_write_tx_fifo_v1 is always called with a write in qup->msg->flags. For stu300, also restructure debug output for resends, since that code as a result is only handling debug output. Reviewed-by: Guenter Roeck <linux@roeck-us.net> [diolan] Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [efm32 and imx] Acked-by: Linus Walleij <linus.walleij@linaro.org> [stu300] Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-29i2c: algos: make use of i2c_8bit_addr_from_msgPeter Rosin3-13/+4
Because it looks neater. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-29i2c: ocores: update HDL sources URLFederico Vaga1-1/+1
The URL is broken. This patch fixes it. Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it> [wsa: shortened the URL a bit] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-29i2c: qup: Add command-line parameter to override SCL frequencyAustin Christ1-4/+13
Add a module parameter to override SCL frequency provided by firmware. This can be useful when testing spec compliance for I2C modes or when debugging issues across multiple operating frequencies. Signed-off-by: Austin Christ <austinwc@codeaurora.org> Reviewed-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-29i2c: qup: Correct duty cycle for FM and FM+Austin Christ1-2/+8
The I2C spec UM10204 Rev. 6 specifies the following timings. Standard Fast Mode Fast Mode Plus SCL low 4.7us 1.3us 0.5us SCL high 4.0us 0.6us 0.26us This results in a 33%/66% duty cycle as opposed to the 50%/50% duty cycle used for Standard-mode. Add High Time Divider settings to correct duty cycle for FM(400kHz) and FM+(1MHz). Signed-off-by: Austin Christ <austinwc@codeaurora.org> Reviewed-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-29i2c: qup: Add support for Fast Mode PlusAustin Christ1-3/+8
Previously the QUP driver limited operation mode to I2C Fast Mode. Add Fast Mode Plus functionality by raising SCL limit from 400kHz to 1MHz. Signed-off-by: Austin Christ <austinwc@codeaurora.org> Reviewed-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-29i2c: qup: add probe path for Centriq ACPI devicesAustin Christ1-9/+12
Add support for Qualcomm Centriq devices that are qup-v2 compatible but do not support DMA, so nodma needs to be set. Signed-off-by: Austin Christ <austinwc@codeaurora.org> Reviewed-by: Sricharan R <sricharan@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-24i2c: robotfuzz-osif: drop pointless testPeter Rosin1-2/+2
In the for-loop test, ret will be either 0 or 1. So, the comparison is pointless. Drop it, and drop the initializer which is then also pointless. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-24i2c: robotfuzz-osif: remove pointless local variablePeter Rosin1-10/+7
Just use the value directly instead of assigning it to a variable first. And then drop the unused variable. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-24i2c: rk3x: Don't print visible virtual mapping MMIO addressShawn Lin1-2/+0
Now %p doesn't print visible pointer address unless the user really want it. According to Documentation/core-api/printk-formats.rst, %px should be used instead, otherwise we could see: rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at (____ptrval____) rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at (____ptrval____) rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at (____ptrval____) rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at (____ptrval____) But I don't really understand why we need dump it in the first place! Let's remove the whole pointless log. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-24i2c: opal: don't check number of messages in the driverWolfram Sang1-4/+0
Since commit 1eace8344c02 ("i2c: add param sanity check to i2c_transfer()") and b7f625840267 ("i2c: add quirk checks to core"), the I2C core does this check now. We can remove it here. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Peter Rosin <peda@axentia.se>
2018-05-24i2c: ibm_iic: don't check number of messages in the driverWolfram Sang1-3/+0
Since commit 1eace8344c02 ("i2c: add param sanity check to i2c_transfer()"), the I2C core does this check now. We can remove it from drivers. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Peter Rosin <peda@axentia.se>
2018-05-24i2c: imx: Switch to SPDX identifierFabio Estevam1-10/+1
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-24platform: x86: intel_cht_int33fe: Fix dependenciesHeikki Krogerus1-2/+1
The driver will not probe unless bq24190 is loaded, so making it a dependency. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Darren Hart <dvhart@infradead.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24i2c: mux: pca954x: merge calls to of_match_device and of_device_get_match_dataJulia Lawall1-5/+2
Drop call to of_match_device, which is subsumed by the subsequent call to of_device_get_match_data. The code becomes simpler, and a temporary variable can be dropped. The semantic match that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression match; identifier i; expression x, dev, e, e1; @@ - match@i = of_match_device(x, dev); - if (match) e = of_device_get_match_data(dev); - else e = e1; + e = of_device_get_match_data(dev); + if (!e) e = e1; @@ identifier r.i; @@ - const struct of_device_id *i; ... when != i // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Peter Rosin <peda@axentia.se>
2018-05-24i2c: mux: demux-pinctrl: use proper parent device for demux adapterWolfram Sang1-1/+1
Due to a typo, the wrong parent device was assigned to the newly created demuxing adapter device. It got connected to the demuxing platform device but not to the selected parent I2C adapter device. Fix it to get a proper parent-child relationship of the demuxed busses. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Peter Rosin <peda@axentia.se>
2018-05-24i2c: mux: improve error message for failed symlinkWolfram Sang1-1/+1
Trivial, but still: the failed symlink is not *for* the channel but a link *to* the channel. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Peter Rosin <peda@axentia.se>
2018-05-24i2c: mux: reg: failed memory allocation is logged elsewhereMarkus Elfring1-3/+1
Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Peter Rosin <peda@axentia.se>
2018-05-22i2c: xlp9xx: Make sure the transfer size is not more than I2C_SMBUS_BLOCK_SIZEGeorge Cherian1-13/+24
For SMBus transactions the max permissible transfer size is I2C_SMBUS_BLOCK_SIZE. It is possible that some clients might not follow it strictly occasionally. This would lead to stack corruption if the driver copies more than I2C_SMBUS_BLOCK_SIZE bytes. Add a check to avoid such conditions. Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-22i2c: xlp9xx: Fix issue seen when updating receive lengthGeorge Cherian1-9/+21
The hardware does not handle updates to the length register gracefully if the new value is less than the number of bytes received so far. If this happens, the i2c controller will not stop the receive transaction properly. Fix this by ensuring that the updated length is ok. This is done by making sure that the new length written to hardware is at least few bytes more than the bytes received so far. While at that refactor the length updation to a new function. Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-22i2c: xlp9xx: Add support for SMBAlertGeorge Cherian1-0/+24
Add support for SMBus alert mechanism to i2c-xlp9xx driver. The second interrupt is parsed to use for SMBus alert. The first interrupt is the i2c controller main interrupt. Signed-off-by: Kamlakant Patel <kamlakant.patel@cavium.com> Signed-off-by: George Cherian <george.cherian@cavium.com> Reviewed-by: Jan Glauber <jglauber@cavium.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-05-22i2c: Export of_i2c_get_board_info()Boris Brezillon1-17/+31
I3C busses have to know about all I2C devices connected on the I3C bus to properly initialize the I3C master, and I2C frames can't be sent on the bus until this initialization is done. We can't let the I2C core parse the DT and instantiate I2C devices as part of its i2c_add_adapter() procedure because, when done this way, I2C devices are directly registered to the device-model and might be attached to drivers which could in turn start sending frames on the bus, which won't work since, as said above, the bus is not yet initialized. Export of_i2c_register_device() in order to let the I3C core parse the I2C device nodes by itself and initialize the bus. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.