aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/hfi1/chip.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-08-25RDMA/hfi1: Convert to SPDX identifierCai Huoqing1-45/+3
use SPDX-License-Identifier instead of a verbose license text Link: https://lore.kernel.org/r/20210823042622.109-1-caihuoqing@baidu.com Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-03-22RDMA: Delete not-used static inline functionsLeon Romanovsky1-5/+0
Perform mass deletion of static inline functions that are not used. Link: https://lore.kernel.org/r/20210314133908.291945-3-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-05-21IB/hfi1: Add interrupt handler functions for accelerated ipoibGrzegorz Andrejczuk1-0/+1
This patch adds the interrupt handler function, the NAPI poll function, and its associated helper functions for receiving accelerated ipoib packets. While we are here, fix the formats of two error printouts. Link: https://lore.kernel.org/r/20200511160637.173205.64890.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-21IB/hfi1: RSM rules for AIPGrzegorz Andrejczuk1-1/+3
This is implementation of RSM rule for AIP packets. AIP rule will use rule RSM2 and will match standard Infiniband packet containg BTH (LNH==BTH) and having Dest QPN prefixed with value 0x81. Spread between receive contexts will be done using source QPN bits. VNIC and AIP will share receive contexts, so their rules will point to the same RMT entries and their shared code is moved to separate functions. If any of the rules is active RMT mapping will be skipped for latter. Changed function hfi1_vnic_is_rsm_full to be more general and moved it from main header to chip.c. Changed the order of RSM rules because AIP rule as more specific one is needed to be placed before more general QOS rule. Rules are occupying two last RSM registers. Link: https://lore.kernel.org/r/20200511160612.173205.73002.stgit@awfm-01.aw.intel.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-10IB/hfi1: Add RcvShortLengthErrCnt to hfi1statsMike Marciniszyn1-0/+1
This counter, RxShrErr, is required for error analysis and debug. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Link: https://lore.kernel.org/r/20200106134235.119356.29123.stgit@awfm-01.aw.intel.com Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-10IB/hfi1: Add software counter for ctxt0 seq dropMike Marciniszyn1-0/+1
All other code paths increment some form of drop counter. This was missed in the original implementation. Fixes: 82c2611daaf0 ("staging/rdma/hfi1: Handle packets with invalid RHF on context 0") Link: https://lore.kernel.org/r/20200106134228.119356.96828.stgit@awfm-01.aw.intel.com Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-10IB/hfi1: Move chip specific functions to chip.cMike Marciniszyn1-0/+6
Move routines and defines associated with hdrq size validation to a chip specific routine since the limits are specific to the device. Fix incorrect value for min size 2 -> 32 CSR writes should also be in chip.c. Create a chip routine to write the hdrq specific CSRs and call as appropriate. Link: https://lore.kernel.org/r/20200106134144.119356.74312.stgit@awfm-01.aw.intel.com Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13IB/{rdmavt, hfi1, qib}: Add a counter for credit waitsKaike Wan1-0/+1
This patch adds a counter for credit waits to assist field debugging. Link: https://lore.kernel.org/r/20190911113047.126040.10857.stgit@awfm-01.aw.intel.com Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-11IB/hfi1: Correct tid qp rcd to match verbs contextMike Marciniszyn1-0/+1
The qp priv rcd pointer doesn't match the context being used for verbs causing issues when 9B and kdeth packets are processed by different receive contexts and hence different CPUs. When running on different CPUs the following panic can occur: WARNING: CPU: 3 PID: 2584 at lib/list_debug.c:59 __list_del_entry+0xa1/0xd0 list_del corruption. prev->next should be ffff9a7ac31f7a30, but was ffff9a7c3bc89230 CPU: 3 PID: 2584 Comm: z_wr_iss Kdump: loaded Tainted: P OE ------------ 3.10.0-862.2.3.el7_lustre.x86_64 #1 Call Trace: <IRQ> [<ffffffffb7b0d78e>] dump_stack+0x19/0x1b [<ffffffffb74916d8>] __warn+0xd8/0x100 [<ffffffffb749175f>] warn_slowpath_fmt+0x5f/0x80 [<ffffffffb7768671>] __list_del_entry+0xa1/0xd0 [<ffffffffc0c7a945>] process_rcv_qp_work+0xb5/0x160 [hfi1] [<ffffffffc0c7bc2b>] handle_receive_interrupt_nodma_rtail+0x20b/0x2b0 [hfi1] [<ffffffffc0c70683>] receive_context_interrupt+0x23/0x40 [hfi1] [<ffffffffb7540a94>] __handle_irq_event_percpu+0x44/0x1c0 [<ffffffffb7540c42>] handle_irq_event_percpu+0x32/0x80 [<ffffffffb7540ccc>] handle_irq_event+0x3c/0x60 [<ffffffffb7543a1f>] handle_edge_irq+0x7f/0x150 [<ffffffffb742d504>] handle_irq+0xe4/0x1a0 [<ffffffffb7b23f7d>] do_IRQ+0x4d/0xf0 [<ffffffffb7b16362>] common_interrupt+0x162/0x162 <EOI> [<ffffffffb775a326>] ? memcpy+0x6/0x110 [<ffffffffc109210d>] ? abd_copy_from_buf_off_cb+0x1d/0x30 [zfs] [<ffffffffc10920f0>] ? abd_copy_to_buf_off_cb+0x30/0x30 [zfs] [<ffffffffc1093257>] abd_iterate_func+0x97/0x120 [zfs] [<ffffffffc10934d9>] abd_copy_from_buf_off+0x39/0x60 [zfs] [<ffffffffc109b828>] arc_write_ready+0x178/0x300 [zfs] [<ffffffffb7b11032>] ? mutex_lock+0x12/0x2f [<ffffffffb7b11032>] ? mutex_lock+0x12/0x2f [<ffffffffc1164d05>] zio_ready+0x65/0x3d0 [zfs] [<ffffffffc04d725e>] ? tsd_get_by_thread+0x2e/0x50 [spl] [<ffffffffc04d1318>] ? taskq_member+0x18/0x30 [spl] [<ffffffffc115ef22>] zio_execute+0xa2/0x100 [zfs] [<ffffffffc04d1d2c>] taskq_thread+0x2ac/0x4f0 [spl] [<ffffffffb74cee80>] ? wake_up_state+0x20/0x20 [<ffffffffc115ee80>] ? zio_taskq_member.isra.7.constprop.10+0x80/0x80 [zfs] [<ffffffffc04d1a80>] ? taskq_thread_spawn+0x60/0x60 [spl] [<ffffffffb74bae31>] kthread+0xd1/0xe0 [<ffffffffb74bad60>] ? insert_kthread_work+0x40/0x40 [<ffffffffb7b1f5f7>] ret_from_fork_nospec_begin+0x21/0x21 [<ffffffffb74bad60>] ? insert_kthread_work+0x40/0x40 Fix by reading the map entry in the same manner as the hardware so that the kdeth and verbs contexts match. Cc: <stable@vger.kernel.org> Fixes: 5190f052a365 ("IB/hfi1: Allow the driver to initialize QP priv struct") Reviewed-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-24IB/hfi1: Add selected Rcv countersMike Marciniszyn1-0/+3
These counters are required for error analysis and debug. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-05IB/hfi1: Add the counter n_tidwaitKaike Wan1-0/+1
This patch adds the counter n_tidwait to count the number of times the TID resource allocator has to wait for TID resources. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-01-31IB/hfi1: Add OPFN helper functions for TID RDMA featureKaike Wan1-1/+2
This patch adds the OPFN helper functions to initialize, encode, decode, and reset OPFN parameters for the TID RDMA feature. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Kaike Wan <kaike.wan@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: Rework the IRQ API to be more flexibleMichael J. Ruhl1-23/+38
The current IRQ API is an all or nothing interface. This has two problems: 1. All IRQs are enabled regardless of use 2. Moving from general interrupt to MSIx handling is difficult Introduce a new API to enable/disable specific IRQs or a range of IRQs. Do not enable and disable all IRQs in one step. Rework various modules to enable/disable IRQs when needed. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-09-01IB/hfi1: Prepare for new HFI1 MSIx APIMichael J. Ruhl1-0/+10
The current HFI1 MSIx API is difficult to follow, change, or add to. In anticipation of moving to an more flexible API, move the current MSIx functionality to the new msix.c module. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-06-22IB/hfi1: Remove caches of chip CSRsMike Marciniszyn1-0/+30
Remove the sizeable cache of the chip sizing CSRs and replace with CSR reads as needed. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-05-09IB/hfi1: Prevent LNI hang when LCB can't obtain lanesSebastian Sanchez1-2/+13
When the LCB isn't able to get any lanes operational on the first transition into mission mode, the link transfer active never happens and the LNI stays in the polling state indefinitely. Reset LCB upon receiving an 8051 interrupt for LCB to try to obtain lanes with firmware version 1.25.0 or later. Also, update the LCB reset value in other parts of the code with a macro defined to make the code more maintainable and rename functions with the link_width label to link_mode to reflect the fact that those functions set and read link related data not just the link width. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-02-01IB/hfi1: Convert PortXmitWait/PortVLXmitWait counters to flit timesKamenee Arumugam1-2/+2
HFI's counters SendWaitCnt and SendWaitVlCnt are in units of TXE cycle time (at 805MHz). OPA counters PortXmitWait and PortVLXmtWait are in units of flit times. Convert the counter values to flit units using following conversion formula: PortXmitWait = SendWaitCnt * 2 * (4 /link_width) * (25 Gbps /link_speed) PortVLXmitWait = SendWaitVLCnt * 2 * (4 /link_width) * (25 Gbps /link_speed) At link up or downgrade events, the link width can change. To ensure accurate counter calculations, sample the counters after the events, during counter requests, and then aggregate the OPA counters. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-05IB/hfi1: Fix infinite loop in 8051 command error pathSebastian Sanchez1-1/+1
When an 8051 command times out, the entire DC block is restarted. During the restart, the host interface version bit is set, which calls do_8051_command() recursively. The host version bit needs to be set before the link moves into polling, so the host version bit can be set in set_local_link_attributes() instead. Thus, the 8051 command functions can be simplied as a non-locking version (dd->dc8051_lock) of those functions are no longer needed. Fixes: 9be6a5d788b0 ("IB/hfi1: Prevent LNI out of sync by resetting host interface version") Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-13IB/hfi1: Reduce 8051 command timeoutJakub Byczkowski1-1/+1
Timeout of 20 seconds is too long for active wait performed for 8051 command completion. It was required for scenarios when transition to polling was requested before offline.quiet state was reached. Currently wait for offline.quiet is properly implemented and timeout can be reduced to 1 second. Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Duane McCrory <duane.mccrory@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18Merge branch 'for-next-early' into for-nextDoug Ledford1-0/+4
The early for-next branch was based on v4.14-rc2, while the shared pull request I got from Mellanox used a v4.14-rc4 base. I'm making the branch that was the shared Mellanox pull request the new for-next branch and merging the early for-next branch into it. Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18Merge branch 'hfi1' into k.o/for-nextDoug Ledford1-0/+3
Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-18IB/hfi1: Fix serdes loopback set-upJan Sokolowski1-0/+3
Change serdes mode setting to use MISC_CONFIG_BITS in VERIFY_CAP_LOCAL_LINK_WIDTH register. This method of setting up serdes loopback is universally compatible across all firmware versions. Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-10-04IB/hfi1: Prevent LNI out of sync by resetting host interface versionSebastian Sanchez1-0/+1
When the link is disabled and re-enabled, the host version bit is not set again, so the firmware behaves as though it’s interacting with an old driver. This causes LNI to get out of sync. The host version bit needs to be set at load_8051_firmware() and _dc_start(). Currently, it's only set at load_8051_firmware(). Create a common function to set the bit with the intent to make the code more maintainable in the future, set the host version bit at _dc_start() and modify the 8051 command API to prevent a deadlock as _dc_start() is already holding the dc8051 lock. Fixes: 913cc67159bc ("IB/hfi1: Always perform offline transition") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Only reset QSFP after link up and turn off AOC TXSebastian Sanchez1-1/+1
QSFP reset enables AOC transmitters by default. They should be off before moving to high power mode to complete the setup. There is no need to reset the QSFP during LNI failure as it was reset at link down. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-09-27IB/hfi1: Turn off AOC TX after offline substatesSebastian Sanchez1-0/+1
Offline.quietDuration was added in the 8051 firmware, and the driver only turns off the AOC transmitters when offline.quiet is reached. However, the AOC transmitters need to be turned off at the new state. Therefore, turn off the AOC transmitters at any offline substates including offline.quiet and offline.quietDuration, then recheck we reached offline.quiet to support backwards compatibility. Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-22IB/hfi1: Remove pstate from hfi1_pportdataJakub Byczkowski1-2/+1
Do not track physical state separately from host_link_state. Deduce physical state from host_link_state when required. Change cache_physical_state to log_physical_state to make sure host_link_state reflects hardwares physical state properly. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-22IB/hfi1: Load fallback platform configuration per HFI deviceJakub Byczkowski1-1/+0
Currently fallback configuration is loaded once per driver instance. With multiple HFI devices in the same system the current code may not load the platform config data for the device. Change fallback platform config data loading to be per device. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-08-22IB/hfi1: Remove lstate from hfi1_pportdataByczkowski, Jakub1-2/+1
Do not track logical state separately from host_link_state. Deduce logical state from host_link_state when required. Transitions in set_link_state and goto_offline already make sure host_link_state reflects hardware's logical state properly. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-31IB/hfi1: Always perform offline transitionSebastian Sanchez1-0/+5
Always initiate an offline transition request when a link down occurs. The firmware will use this request to confirm that the driver has seen the link down message. A host version is set to indicate this driver behavior to the firmware. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-31IB/hfi1: Pass the context pointer rather than the indexMichael J. Ruhl1-1/+2
The hfi1_rcvctrl() function receives an index which it then converts to an rcd. Since most functions have the rcd, use that instead. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-31IB/hfi1: Use context pointer rather than context indexMichael J. Ruhl1-3/+5
The hfi1_<set|clear>_ctxt_<j|p>key functions take a context index and look up the context based on that index. Since the context index is being retrieved from the context, this doesn't seem optimal. Pass the context pointer for use, rather than the context index. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-31IB/hfi1: Size rcd array index correctly and consistentlyMichael J. Ruhl1-4/+4
The array index for the rcd array is sized several different ways throughout the code. Use the user interface size (u16) as the standard size and update the necessary code to reflect this. u16 is large enough for the largest amount of supported contexts. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-31IB/hfi1: Fix bar0 mapping to use write combiningMike Marciniszyn1-2/+2
When the debugpat kernel boot flag is turned on the following traces are printed: [ 1884.793168] x86/PAT: Overlap at 0x90000000-0x92000000 [ 1884.803510] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff], track uncached-minus, req write-combining, ret uncached-minus [ 1884.818167] hfi1 0000:05:00.0: hfi1_0: WC Remapped RcvArray: ffffc9000a980000 The ioremap_wc() clearly is not returning a write combining mapping due to an overlap where the RcvArray is mapped in a uncached mapping prior to creating the proposed write combining mapping. The patch replaces the single base register for uncached CSRs that used to overlap the RcvArray with two mappings. One, kregbase1, from the bar0 up to the RcvArray and another, kregbase2, from the end of the RcvArray to the pio send buffer space. A new dd field, base2_start, is used to convert the zero-based offset in the CSR routines to the correct kregbase1/kregbase2 mapping. A single direct write of the RcvArray CSRs is replaced with hfi1_put_tid() to insure correct access using the new disjoint mapping. Additionally, the kregend field is deleted since it is only ever written. patdebug now shows the RcvArray as write combining: [ 35.688990] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff], track write-combining, req write-combining, ret write-combining To insulate from any potential issues with write combining, all writeq are now flushed in hfi1_put_tid() and rcv_array_wc_fill(). Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Modify handling of physical link state by Host DriverByczkowski, Jakub1-1/+1
Ensure states returned to the Fabric Manager are consistent with the OPA specification by caching the physical state along with the logical state. Reviewed-by: Stuart Summers <john.s.summers@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Andrzej Kotlowski <andrzej.kotlowski@intel.com> Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-27IB/hfi1: Setup common IB fields in hfi1_packet structDon Hiatt1-2/+0
We move many common IB fields into the hfi1_packet structure and set them up in a single function. This allows us to set the fields in a single place and not deal with them throughout the driver. Reviewed-by: Brian Welty <brian.welty@intel.com> Reviewed-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Clean up context initializationMichael J. Ruhl1-1/+1
Context initialization mixes base context init with sub context init. This is bad because contexts can be reused, and on reuse, reinit things that should not re-initialized. Normalize comments and function names to refer to base context and sub context (not main, shared or slaves). Separate the base context initialization from sub context initialization. hfi1_init_ctxt() cannot return an error so changed to a void and remove error message. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Correctly clear the pkeyMichael J. Ruhl1-1/+1
In the close path the context is removed from the device array, and then the clear pkey function is called. The pkey function trys to get the context from the device array, but because it was removed the clearing does not occur. Rework pkey clear function to work as expected. Update the function variable to reflect the correct size and name of the hw_context. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-05-04IB/hfi1: Name function prototype parametersMichael J. Ruhl1-2/+4
To improve the readability of function prototypes, give the parameters names. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-20IB/hfi1: Virtual Network Interface Controller (VNIC) HW supportVishwanathapura, Niranjana1-0/+2
HFI1 HW specific support for VNIC functionality. Dynamically allocate a set of contexts for VNIC when the first vnic port is instantiated. Allocate VNIC contexts from user contexts pool and return them back to the same pool while freeing up. Set aside enough MSI-X interrupts for VNIC contexts and assign them when the contexts are allocated. On the receive side, use an RSM rule to spread TCP/UDP streams among VNIC contexts. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com> Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-05IB/hfi1: Add a patch value to the firmware version stringMichael J. Ruhl1-7/+11
The HFI firmware now includes a patch level in its version. Updating the necessary code to include the patch version in the firmware string. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-11-15IB/hfi1: Fix status error code for unsupported packetsJakub Pawlak1-0/+3
Set the status code BAD_L2 when unsupported type of packet is received and dropped. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jakub Pawlak <jakub.pawlak@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Adjust hardware buffering parameterHarish Chegondi1-1/+1
It was determined that 0x880 is a better value for hardware buffering, use it. Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/hfi1: Act on external device timeoutDean Luick1-1/+3
Add missing external device timeout notification. Recognize it as a failed LNI signal from the 8051 firmware. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-10-02IB/qib,IB/hfi: Use core common header fileMike Marciniszyn1-1/+1
Use common header file structs, defines, and accessors in the drivers. The old declarations are removed. The repositioning of the includes allows for the removal of hfi1_message_header and replaces its use with ib_header. Also corrected are two issues with set_armed_to_active(): - The "packet" parameter is now a pointer as it should have been - The etype is validated to insure that the header is correct Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-02IB/hfi1: Add QSFP sanity pre-checkDean Luick1-0/+1
Sometimes a QSFP device does not respond in the expected time after a power-on. Add a read pre-check/retry when starting the link on driver load. Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/hfi1: Use the same capability state for all shared contextsDean Luick1-2/+0
Save the current capability state at user context creation time. Report this saved value for all shared contexts. Also get rid of unnecessary hfi1_get_base_kinfo function. Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/hfi1: Read all firmware versionsDean Luick1-0/+1
Read the version of the SBus, PCIe SerDes, and Fabric Serdes firmwares at driver load time. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-08-02IB/hfi1: Remove TWSI referencesDean Luick1-2/+0
Remove the TWSI code. The driver now uses the kernel's built-in i2c bit bus module. Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-26IB/hfi1: Correct 8051 link parameter settingsDean Luick1-0/+6
Two 8051 link settings, external device config and tuning method, were written in the wrong location and the previous settings were not cleared. For both, clear the old value and write the new value. Fixes: 8ebd4cf1852a ("staging/rdma/hfi1: Add active and optical cable support") Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-26IB/hfi1: Move driver out of stagingDennis Dalessandro1-0/+1368
The TODO list for the hfi1 driver was completed during 4.6. In addition other objections raised (which are far beyond what was in the TODO list) have been addressed as well. It is now time to remove the driver from staging and into the drivers/infiniband sub-tree. Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.