aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/mlx4/mlx4_ib.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-05-20RDMA/mlx4: Avoid flush_scheduled_work() usageTetsuo Handa1-0/+3
Flushing system-wide workqueues is dangerous and will be forbidden. Replace system_wq with local cm_wq. Link: https://lore.kernel.org/r/22f7183b-cc16-5a34-e879-7605f5efc6e6@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-10-12RDMA/counter: Add a descriptor in struct rdma_hw_statsAharon Landau1-1/+1
Add a counter statistic descriptor structure in rdma_hw_stats. In addition to the counter name, more meta-information will be added. This code extension is needed for optional-counter support in the following patches. Link: https://lore.kernel.org/r/20211008122439.166063-4-markzhang@nvidia.com Signed-off-by: Aharon Landau <aharonl@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-03RDMA: Globally allocate and release QP memoryLeon Romanovsky1-3/+2
Convert QP object to follow IB/core general allocation scheme. That change allows us to make sure that restrack properly kref the memory. Link: https://lore.kernel.org/r/48e767124758aeecc433360ddd85eaa6325b34d9.1627040189.git.leonro@nvidia.com Reviewed-by: Gal Pressman <galpress@amazon.com> #efa Tested-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> #rdma and core Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-03-26RDMA: Support more than 255 rdma portsMark Bloch1-13/+13
Current code uses many different types when dealing with a port of a RDMA device: u8, unsigned int and u32. Switch to u32 to clean up the logic. This allows us to make (at least) the core view consistent and use the same type. Unfortunately not all places can be converted. Many uverbs functions expect port to be u8 so keep those places in order not to break UAPIs. HW/Spec defined values must also not be changed. With the switch to u32 we now can support devices with more than 255 ports. U32_MAX is reserved to make control logic a bit easier to deal with. As a device with U32_MAX ports probably isn't going to happen any time soon this seems like a non issue. When a device with more than 255 ports is created uverbs will report the RDMA device as having 255 ports as this is the max currently supported. The verbs interface is not changed yet because the IBTA spec limits the port size in too many places to be u8 and all applications that relies in verbs won't be able to cope with this change. At this stage, we are extending the interfaces that are using vendor channel solely Once the limitation is lifted mlx5 in switchdev mode will be able to have thousands of SFs created by the device. As the only instance of an RDMA device that reports more than 255 ports will be a representor device and it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other ULPs aren't effected by this change and their sysfs/interfaces that are exposes to userspace can remain unchanged. While here cleanup some alignment issues and remove unneeded sanity checks (mainly in rdmavt), Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-12-07RDMA/uverbs: Allow drivers to create a new HW object during rereg_mrJason Gunthorpe1-4/+4
mlx5 has an ugly flow where it tries to allocate a new MR and replace the existing MR in the same memory during rereg. This is very complicated and buggy. Instead of trying to replace in-place inside the driver, provide support from uverbs to change the entire HW object assigned to a handle during rereg_mr. Since destroying a MR is allowed to fail (ie if a MW is pointing at it) and can't be detected in advance, the algorithm creates a completely new uobject to hold the new MR and swaps the IDR entries of the two objects. The old MR in the temporary IDR entry is destroyed, and if it fails rereg_mr succeeds and destruction is deferred to FD release. This complexity is why this cannot live in a driver safely. Link: https://lore.kernel.org/r/20201130075839.278575-4-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-09IB/mlx4: Convert rej_tmout radix-tree to XArrayHåkon Bugge1-3/+1
Was missed during the initial review of the below patch Fixes: 227a0e142e37 ("IB/mlx4: Add support for REJ due to timeout") Link: https://lore.kernel.org/r/1602253482-6718-1-git-send-email-haakon.bugge@oracle.com Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-29RDMA/mlx4: Embed GSI QP into general mlx4_ib QPLeon Romanovsky1-1/+24
Refactor the storage struct of mlx4 GSI QP to be embedded in mlx4_ib QP. This allows to remove internal memory allocation of QP struct which is hidden inside the mlx4_ib_create_qp() flow. Link: https://lore.kernel.org/r/20200926102450.2966017-6-leon@kernel.org Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-17RDMA: Convert RWQ table logic to ib_core allocation schemeLeon Romanovsky1-5/+12
Move struct ib_rwq_ind_table allocation to ib_core. Link: https://lore.kernel.org/r/20200902081623.746359-3-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-17RDMA: Clean MW allocation and free flowsLeon Romanovsky1-2/+1
Move allocation and destruction of memory windows under ib_core responsibility and clean drivers to ensure that no updates to MW ib_core structures are done in driver layer. Link: https://lore.kernel.org/r/20200902081623.746359-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA: Restore ability to return error for destroy WQLeon Romanovsky1-1/+1
Make this interface symmetrical to other destroy paths. Fixes: a49b1dc7ae44 ("RDMA: Convert destroy_wq to be void") Link: https://lore.kernel.org/r/20200907120921.476363-9-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA: Allow fail of destroy CQLeon Romanovsky1-1/+1
Like any other verbs objects, CQ shouldn't fail during destroy, but mlx5_ib didn't follow this contract with mixed IB verbs objects with DEVX. Such mix causes to the situation where FW and kernel are fully interdependent on the reference counting of each side. Kernel verbs and drivers that don't have DEVX flows shouldn't fail. Fixes: e39afe3d6dbd ("RDMA: Convert CQ allocations to be under core responsibility") Link: https://lore.kernel.org/r/20200907120921.476363-7-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA: Restore ability to fail on SRQ destroyLeon Romanovsky1-1/+1
In similar way to other IB objects, restore the ability to return error on SRQ destroy. Strictly speaking, this change is not necessary, and provided here to ensure a symmetrical interface like other destroy functions. Fixes: 68e326dea1db ("RDMA: Handle SRQ allocations by IB/core") Link: https://lore.kernel.org/r/20200907120921.476363-5-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA: Restore ability to fail on AH destroyLeon Romanovsky1-1/+4
Like any other IB verbs objects, AH are refcounted by ib_core. The release of those objects are controlled by ib_core with promise that AH destroy can't fail. Being SW object for now, this change makes dealloc_ah() to behave like any other destroy IB flows. Fixes: d345691471b4 ("RDMA: Handle AH allocations by IB/core") Link: https://lore.kernel.org/r/20200907120921.476363-3-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24IB/mlx4: Add support for REJ due to timeoutHåkon Bugge1-0/+3
A CM REJ packet with its reason equal to timeout is a special beast in the sense that it doesn't have a Remote Communication ID nor does it have a Remote Port GID. Using CX-3 virtual functions, either from a bare-metal machine or pass-through from a VM, MAD packets are proxied through the PF driver. Since the VF drivers have separate name spaces for MAD Transaction Ids (TIDs), the PF driver has to re-map the TIDs and keep the book keeping in a cache. This proxying doesn't not handle said REJ packets. If the active side abandons its connection attempt after having sent a REQ, it will send a REJ with the reason being timeout. This example can be provoked by a simple user-verbs program, which ends up doing: rdma_connect(cm_id, &conn_param); rdma_destroy_id(cm_id); using the async librdmacm API. Having dynamic debug prints enabled in the mlx4_ib driver, we will then see: mlx4_ib_demux_cm_handler: Couldn't find an entry for pv_cm_id 0x0, attr_id 0x12 The solution is to introduce a radix-tree. When a REQ packet is received and handled in mlx4_ib_demux_cm_handler(), we know the connecting peer's para-virtual cm_id and the destination slave. We then insert an entry into the tree with said information. We also schedule work to remove this entry from the tree and free it, in order to avoid memory leak. When a REJ packet with reason timeout is received, we can look up the slave in the tree, and deliver the packet to the correct slave. When a duplicate REQ packet is received, the entry is in the tree. In this case, we adjust the delayed work in order to avoid a too premature eviction of the entry. When cleaning up, we simply traverse the tree and modify any delayed work to use a zero delay. A subsequent flush of the system_wq will ensure all entries being wiped out. Fixes: 3cf69cc8dbeb ("IB/mlx4: Add CM paravirtualization") Link: https://lore.kernel.org/r/20200803061941.1139994-6-haakon.bugge@oracle.com Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24IB/mlx4: Fix starvation in paravirt mux/demuxHåkon Bugge1-0/+2
The mlx4 driver will proxy MAD packets through the PF driver. A VM or an instantiated VF will send its MAD packets to the PF driver using loop-back. The PF driver will be informed by an interrupt, but defer the handling and polling of CQEs to a worker thread running on an ordered work-queue. Consider the following scenario: the VMs will in short proximity in time, for example due to a network event, send many MAD packets to the PF driver. Lets say there are K VMs, each sending N packets. The interrupt from the first VM will start the worker thread, which will poll N CQEs. A common case here is where the PF driver will multiplex the packets received from the VMs out on the wire QP. But before the wire QP has returned a send CQE and associated interrupt, the other K - 1 VMs have sent their N packets as well. The PF driver has to multiplex K * N packets out on the wire QP. But the send-queue on the wire QP has a finite capacity. So, in this scenario, if K * N is larger than the send-queue capacity of the wire QP, we will get MAD packets dropped on the floor with this dynamic debug message: mlx4_ib_multiplex_mad: failed sending GSI to wire on behalf of slave 2 (-11) and this despite the fact that the wire send-queue could have capacity, but the PF driver isn't aware, because the wire send CQEs have not yet been polled. We can also have a similar scenario inbound, with a wire recv-queue larger than the tunnel QP's send-queue. If many remote peers send MAD packets to the very same VM, the tunnel send-queue destined to the VM could allegedly be construed to be full by the PF driver. This starvation is fixed by introducing separate work queues for the wire QPs vs. the tunnel QPs. With this fix, using a dual ported HCA, 8 VFs instantiated, we could run cmtime on each of the 18 interfaces towards a similar configured peer, each cmtime instance with 800 QPs (all in all 14400 QPs) without a single CM packet getting lost. Fixes: 3cf69cc8dbeb ("IB/mlx4: Add CM paravirtualization") Link: https://lore.kernel.org/r/20200803061941.1139994-5-haakon.bugge@oracle.com Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-24IB/mlx4: Separate tunnel and wire bufs parametersHåkon Bugge1-1/+2
Using CX-3 in virtualized mode, MAD packets are proxied through the PF driver. The feed is N tunnel QPs, and what is received from the VFs is multiplexed out on the wire QP. Since this is a many-to-one scenario, it is better to have separate initialization parameters for the two usages. The number of wire and tunnel bufs are yanked up to 2K and 512 respectively. With this set of parameters, a system consisting of eight physical servers, each with eight VMs and 14 I/O servers (BM), can run switch fail-over without seeing: mlx4_ib_demux_mad: failed sending GSI to slave 3 via tunnel qp (-11) or mlx4_ib_multiplex_mad: failed sending GSI to wire on behalf of slave 2 (-11) Fixes: 3cf69cc8dbeb ("IB/mlx4: Add CM paravirtualization") Link: https://lore.kernel.org/r/20200803061941.1139994-4-haakon.bugge@oracle.com Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-06RDMA: Remove the udata parameter from alloc_mr callbackGal Pressman1-1/+1
Allocating an MR flow can only be initiated by kernel users, and not from userspace so a udata parameter is redundant. Link: https://lore.kernel.org/r/20200706120343.10816-4-galpress@amazon.com Signed-off-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-02RDMA/mlx4: Remove FMR support for memory registrationMax Gurtovoy1-16/+0
HCA's that are driven by mlx4 driver support FRWR method to register memory. Remove the ancient and unsafe FMR method. Link: https://lore.kernel.org/r/8-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-05-02RDMA: Group create AH arguments in structMaor Gottlieb1-1/+1
Following patch adds additional argument to the create AH function, so it make sense to group ah_attr and flags arguments in struct. Link: https://lore.kernel.org/r/20200430192146.12863-13-maorg@mellanox.com Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Acked-by: Devesh Sharma <devesh.sharma@broadcom.com> Acked-by: Gal Pressman <galpress@amazon.com> Acked-by: Weihang Li <liweihang@huawei.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-19IB/mlx4: Update HW GID table while adding vlan GIDDanit Goldberg1-0/+1
When adding a new GID compare the vlan along with the GID and type. This allows vlan's to have GIDs that alias each other, such as the default GID. Otherwise they the GID cache view can become inconsistent with the HW view. Link: https://lore.kernel.org/r/20191115154457.247763-1-leon@kernel.org Signed-off-by: Danit Goldberg <danitg@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-11-12RDMA: Change MAD processing function to remove extra casting and parameterLeon Romanovsky1-4/+3
All users of process_mad() converts input pointers from ib_mad_hdr to be ib_mad, update the function declaration to use ib_mad directly. Also remove not used input MAD size parameter. Link: https://lore.kernel.org/r/20191029062745.7932-17-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Tested-By: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-20RDMA: Convert destroy_wq to be voidLeon Romanovsky1-1/+1
All callers of destroy WQ are always success and there is no need to check their return value, so convert destroy_wq to be void. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11RDMA: Convert CQ allocations to be under core responsibilityLeon Romanovsky1-3/+2
Ensure that CQ is allocated and freed by IB/core and not by drivers. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11RDMA: Clean destroy CQ in drivers do not return errorsLeon Romanovsky1-1/+1
Like all other destroy commands, .destroy_cq() call is not supposed to fail. In all flows, the attempt to return earlier caused to memory leaks. This patch converts .destroy_cq() to do not return any errors. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Gal Pressman <galpress@amazon.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-04-08RDMA: Handle SRQ allocations by IB/coreLeon Romanovsky1-4/+3
Convert SRQ allocation from drivers to be in the IB/core Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-08RDMA: Handle AH allocations by IB/coreLeon Romanovsky1-7/+5
Simplify drivers by ensuring lifetime of ib_ah object. The changes in .create_ah() go hand in hand with relevant update in .destroy_ah(). We will use this opportunity and convert .destroy_ah() to don't fail, as it was suggested a long time ago, because there is nothing to do in case of failure during destroy. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01IB: Pass only ib_udata in function prototypesShamir Rabinovitch1-3/+1
Now when ib_udata is passed to all the driver's object create/destroy APIs the ib_udata will carry the ib_ucontext for every user command. There is no need to also pass the ib_ucontext via the functions prototypes. Make ib_udata the only argument psssed. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-04-01IB: Pass uverbs_attr_bundle down ib_x destroy pathShamir Rabinovitch1-9/+8
The uverbs_attr_bundle with the ucontext is sent down to the drivers ib_x destroy path as ib_udata. The next patch will use the ib_udata to free the drivers destroy path from the dependency in 'uobject->context' as we already did for the create path. Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-03-26mlx4: Convert pv_id_table to XArrayMatthew Wilcox1-2/+3
Signed-off-by: Matthew Wilcox <willy@infradead.org> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-01-10IB/{core,hw}: Have ib_umem_get extract the ib_ucontext from ib_udataJason Gunthorpe1-1/+2
ib_umem_get() can only be called in a method callback, which always has a udata parameter. This allows ib_umem_get() to derive the ucontext pointer directly from the udata without requiring the drivers to find it in some way or another. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
2018-12-19RDMA: Mark if destroy address handle is in a sleepable contextGal Pressman1-1/+1
Introduce a 'flags' field to destroy address handle callback and add a flag that marks whether the callback is executed in an atomic context or not. This will allow drivers to wait for completion instead of polling for it when it is allowed. Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-12-19RDMA: Mark if create address handle is in a sleepable contextGal Pressman1-1/+1
Introduce a 'flags' field to create address handle callback and add a flag that marks whether the callback is executed in an atomic context or not. This will allow drivers to wait for completion instead of polling for it when it is allowed. Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-22mlx4: trigger IB events needed by SMCUrsula Braun1-0/+1
The mlx4 driver does not trigger an IB_EVENT_PORT_ACTIVE when the RoCE network interface is activated. When SMC determines the RoCE device port to be used, it checks the port states. This patch triggers IB events for NETDEV_UP and NETDEV_DOWN. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-20RDMA/mlx4: Use rdma_user_mmap_ioJason Gunthorpe1-5/+0
Rely on the new core code helper to map BAR memory from the driver. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-07-30IB/mlx4: Use 4K pages for kernel QP's WQE bufferJack Morgenstein1-1/+0
In the current implementation, the driver tries to allocate contiguous memory, and if it fails, it falls back to 4K fragmented allocation. Once the memory is fragmented, the first allocation might take a lot of time, and even fail, which can cause connection failures. This patch changes the logic to always allocate with 4K granularity, since it's more robust and more likely to succeed. This patch was tested with Lustre and no performance degradation was observed. Note: This commit eliminates the "shrinking WQE" feature. This feature depended on using vmap to create a virtually contiguous send WQ. vmap use was abandoned due to problems with several processors (see the commit cited below). As a result, shrinking WQE was available only with physically contiguous send WQs. Allocating such send WQs caused the problems described above. Therefore, as a side effect of eliminating the use of large physically contiguous send WQs, the shrinking WQE feature became unavailable. Warning example: worker/20:1: page allocation failure: order:8, mode:0x80d0 CPU: 20 PID: 513 Comm: kworker/20:1 Tainted: G OE ------------ Workqueue: ib_cm cm_work_handler [ib_cm] Call Trace: [<ffffffff81686d81>] dump_stack+0x19/0x1b [<ffffffff81186160>] warn_alloc_failed+0x110/0x180 [<ffffffff8118a954>] __alloc_pages_nodemask+0x9b4/0xba0 [<ffffffff811ce868>] alloc_pages_current+0x98/0x110 [<ffffffff81184fae>] __get_free_pages+0xe/0x50 [<ffffffff8133f6fe>] swiotlb_alloc_coherent+0x5e/0x150 [<ffffffff81062551>] x86_swiotlb_alloc_coherent+0x41/0x50 [<ffffffffa056b4c4>] mlx4_buf_direct_alloc.isra.7+0xc4/0x180 [mlx4_core] [<ffffffffa056b73b>] mlx4_buf_alloc+0x1bb/0x260 [mlx4_core] [<ffffffffa0b15496>] create_qp_common+0x536/0x1000 [mlx4_ib] [<ffffffff811c6ef7>] ? dma_pool_free+0xa7/0xd0 [<ffffffffa0b163c1>] mlx4_ib_create_qp+0x3b1/0xdc0 [mlx4_ib] [<ffffffffa0b01bc2>] ? mlx4_ib_create_cq+0x2d2/0x430 [mlx4_ib] [<ffffffffa0b21f20>] mlx4_ib_create_qp_wrp+0x10/0x20 [mlx4_ib] [<ffffffffa08f152a>] ib_create_qp+0x7a/0x2f0 [ib_core] [<ffffffffa06205d4>] rdma_create_qp+0x34/0xb0 [rdma_cm] [<ffffffffa08275c9>] kiblnd_create_conn+0xbf9/0x1950 [ko2iblnd] [<ffffffffa074077a>] ? cfs_percpt_unlock+0x1a/0xb0 [libcfs] [<ffffffffa0835519>] kiblnd_passive_connect+0xa99/0x18c0 [ko2iblnd] Fixes: 73898db04301 ("net/mlx4: Avoid wrong virtual mappings") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-30RDMA, core and ULPs: Declare ib_post_send() and ib_post_recv() arguments constBart Van Assche1-6/+6
Since neither ib_post_send() nor ib_post_recv() modify the data structure their second argument points at, declare that argument const. This change makes it necessary to declare the 'bad_wr' argument const too and also to modify all ULPs that call ib_post_send(), ib_post_recv() or ib_post_srq_recv(). This patch does not change any functionality but makes it possible for the compiler to verify whether the ib_post_(send|recv|srq_recv) really do not modify the posted work request. To make this possible, only one cast had to be introduce that casts away constness, namely in rpcrdma_post_recvs(). The only way I can think of to avoid that cast is to introduce an additional loop in that function or to change the data type of bad_wr from struct ib_recv_wr ** into int (an index that refers to an element in the work request list). However, both approaches would require even more extensive changes than this patch. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-26IB/mlx4: Create slave AH's directlyJason Gunthorpe1-0/+4
Since slave GID's do not exist in the core gid table we can no longer use the core code to help do this without creating inconsistencies. Directly create the AH using mlx4 internal APIs. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-06-25IB/mlx4: Add support for drain SQ & RQYishai Hadas1-0/+2
This patch follows the logic from ib_core but considers the internal device state upon executing the involved commands. Specifically, Upon internal error state modify QP to an error state can be assumed to be success as each in-progress WR going to be flushed in error in any case as expected by that modify command. In addition, As the drain should never fail the driver makes sure that post_send/recv will succeed even if the device is already in an internal error state. As such once the driver will supply the simulated/SW CQEs the CQE for the drain WR will be handled as well. In case of an internal error state the CQE for the drain WR may be completed as part of the main task that handled the error state or by the task that issued the drain WR. As the above depends on scheduling the code takes the relevant locks and actions to make sure that the completion handler for that WR will always be called after that the post_send/recv were issued but not in parallel to the other task that handles the error flow. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-18IB/mlx4: Use GID attribute from ah attributeParav Pandit1-1/+1
While converting GID index from attribute to that of the HCA, GID attribute is available from the ah_attr. Make use of GID attribute to simplify the code and also avoid avoid GID query. Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2018-03-15IB/mlx4: Add Scatter FCS support over WQ creationGuy Levi1-0/+1
As a default, for Ethernet packets, the device scatters only the payload of ingress packets. The scatter FCS feature lets the user to get the FCS (Ethernet's frame check sequence) in the received WR's buffer as a 4 Bytes trailer following the packet's payload. Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-15RDMA/mlx4: Move flag constants to uapi headerJason Gunthorpe1-4/+0
MLX4_USER_DEV_CAP_LARGE_CQE (via mlx4_ib_alloc_ucontext_resp.dev_caps) and MLX4_IB_QUERY_DEV_RESP_MASK_CORE_CLOCK_OFFSET (via mlx4_uverbs_ex_query_device_resp.comp_mask) are copied directly to userspace and form part of the uAPI. Move them to the uapi header where they belong. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-07IB/mlx4: Move mlx4_uverbs_ex_query_device_resp to include/uapi/Yishai Hadas1-14/+0
This struct is involved in the user API for mlx4 and should not be hidden inside a driver header file. Fixes: 09d208b258a2 ("IB/mlx4: Add report for RSS capabilities by vendor channel") Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2017-11-13IB/mlx4: Exposing modify CQ callback to uverbs layerYonatan Cohen1-0/+1
Exposed mlx4_ib_modify_cq to be called from ib device verb list. Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-13IB/mlx4: Add contig support for control objectsGuy Levi1-0/+2
Taking advantage of the optimization which was introduced in previous commit ("IB/mlx4: Use optimal numbers of MTT entries") to optimize the MTT usage for QP and CQ. Signed-off-by: Guy Levi <guyle@mellanox.com> Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-11-10IB/mlx4: Add report for RSS capabilities by vendor channelGuy Levi1-5/+11
The mlx4's RSS patches submission missed a report of RSS capabilities which should be reported by the vendor channel in query_device. Signed-off-by: Guy Levi <guyle@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-24IB/mlx4: Add support for RSS QPGuy Levi1-0/+8
Add support to work with a RSS QP by using an indirection table object upon QP creation. Other related QP verbs (e.g. modify/destroy/query) were updated as well for that QP mode. Notes: - The RX hash properties are supplied as driver private data. - The RSS QP port is used on the associated WQs in its indirection table. Applying different ports during WQ life time is not allowed. - The expected RSS QP flow is: create, modify(RST->INIT), modify(RST->RTR), destroy. Signed-off-by: Guy Levi <guyle@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-24IB/mlx4: Add support for WQ indirection table related verbsGuy Levi1-0/+6
To enable RSS functionality the IB indirection table object (i.e. ib_rwq_ind_table) should be used. This patch implements the related verbs as of create and destroy an indirection table. In downstream patches the indirection table will be used as part of RSS QP creation. Signed-off-by: Guy Levi <guyle@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-24IB/mlx4: Add support for WQ related verbsGuy Levi1-1/+24
Support create/modify/destroy WQ related verbs. The base IB object to enable RSS functionality is a WQ (i.e. ib_wq). This patch implements the related WQ verbs as of create, modify and destroy. In downstream patches the WQ will be used as part of an indirection table (i.e. ib_rwq_ind_table) to enable RSS QP creation. Notes: ConnectX-3 hardware requires consecutive WQNs list as receive descriptor queues for the RSS QP. Hence, the driver manages consecutive ranges lists per context which the user must respect. Destroying the WQ does not return its WQN back to its range for reusing. However, destroying all WQs from the same range releases the range and in turn releases its WQNs for reusing. Since the WQ object is not a natural object in the hardware, the driver implements the WQ by the hardware QP. As such, the WQ inherits its port from its RSS QP parent upon its RST->INIT transition and by that time its state is applied to the hardware. Signed-off-by: Guy Levi <guyle@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-24IB/mlx4: Add inline-receive supportMaor Gottlieb1-0/+3
When inline-receive is enabled, the HCA may write received data into the receive WQE. Inline-receive is enabled by setting its matching bit in the QP context and each single-packet message with payload not exceeding the receive WQE size will be delivered to the WQE. The completion report will indicate that the payload was placed to the WQE. It includes: 1) Return maximum supported size of inline-receive by the hardware in query_device vendor's data part. 2) Enable the feature when requested by the vendor data input. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-17{net, IB}/mlx4: Remove gfp flags argumentLeon Romanovsky1-1/+0
The caller to the driver marks GFP_NOIO allocations with help of memalloc_noio-* calls now. This makes redundant to pass down to the driver gfp flags, which can be GFP_KERNEL only. The patch removes the gfp flags argument and updates all driver paths. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.