aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/infiniband/hw/usnic (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-09-29RDMA/usnic: fix set-but-not-unused variable 'flags' warningZeng Heng1-3/+0
Remove unused local variable 'flag' without any logic changes. Fixes: e3cf00d0a87f ("IB/usnic: Add Cisco VIC low-level hardware driver") Signed-off-by: Zeng Heng <zengheng4@huawei.com> Link: https://lore.kernel.org/r/20220929031200.4060891-1-zengheng4@huawei.com Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-06-16RDMA/usnic: Use device_iommu_capable()Robin Murphy1-1/+1
Use the new interface to check the capability for our device specifically. Link: https://lore.kernel.org/r/96ffe7050da0aa0ad6bce4705c3532f3ecaf32e3.1654688682.git.robin.murphy@arm.com Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-04-08RDMA/usnic: Refactor usnic_uiom_alloc_pd()Robin Murphy3-6/+4
Rather than hard-coding pci_bus_type, pass the PF device through to usnic_uiom_alloc_pd() and retrieve its bus there. This prepares for iommu_domain_alloc() changing to take a device rather than a bus_type. Link: https://lore.kernel.org/r/ef607cb3f5a09920b86971b8c8e60af8c647457e.1649169359.git.robin.murphy@arm.com Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-04-08RDMA/usnic: Stop using iommu_present()Robin Murphy3-17/+5
Even if an IOMMU might be present for some PCI segment in the system, that doesn't necessarily mean it provides translation for the device(s) we care about. Replace iommu_present() with a more appropriate check at probe time, and garbage-collect the resulting empty init function. Link: https://lore.kernel.org/r/f707b4248e1d33b6d2c7f1d7c94febb802cf9890.1649161199.git.robin.murphy@arm.com Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-04-06RDMA: Split kernel-only global device caps from uverbs device capsJason Gunthorpe1-1/+2
Split out flags from ib_device::device_cap_flags that are only used internally to the kernel into kernel_cap_flags that is not part of the uapi. This limits the device_cap_flags to being the same bitmap that will be copied to userspace. This cleanly splits out the uverbs flags from the kernel flags to avoid confusion in the flags bitmap. Add some short comments describing which each of the kernel flags is connected to. Remove unused kernel flags. Link: https://lore.kernel.org/r/0-v2-22c19e565eef+139a-kern_caps_jgg@nvidia.com Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-01-28RDMA/usnic: Delete useless module.h includeLeon Romanovsky6-6/+0
There is no need in include of module.h in the following files. Link: https://lore.kernel.org/r/745480bafd6f63c97a7049f34d84ef17dbc167d6.1642960861.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2022-01-05RDMA: Use default_groups in kobj_typeGreg Kroah-Hartman1-1/+2
There are currently 2 ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the IB code to use default_groups field which has been the preferred way since commit aa30f47cf666 ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Link: https://lore.kernel.org/r/20220103152259.531034-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-11-19RDMA/usnic: Clean up usnic_ib_alloc_pd()Dan Carpenter1-5/+3
Remove the unnecessary "umem_pd" variable. And usnic_uiom_alloc_pd() never returns NULL so remove the NULL check. Link: https://lore.kernel.org/r/20211118113924.GH1147@kili Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-10-25RDMA: Constify netdev->dev_addr accessesJakub Kicinski2-2/+2
netdev->dev_addr will become const soon, make sure drivers propagate the qualifier. Link: https://lore.kernel.org/r/20211019182604.1441387-4-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-09-24RDMA/usnic: Lock VF with mutex instead of spinlockLeon Romanovsky3-10/+10
Usnic VF doesn't need lock in atomic context to create QPs, so it is safe to use mutex instead of spinlock. Such change fixes the following smatch error. Smatch static checker warning: lib/kobject.c:289 kobject_set_name_vargs() warn: sleeping in atomic context Fixes: 514aee660df4 ("RDMA: Globally allocate and release QP memory") Link: https://lore.kernel.org/r/2a0e295786c127e518ebee8bb7cafcb819a625f6.1631520231.git.leonro@nvidia.com Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-03RDMA: Globally allocate and release QP memoryLeon Romanovsky5-67/+52
Convert QP object to follow IB/core general allocation scheme. That change allows us to make sure that restrack properly kref the memory. Link: https://lore.kernel.org/r/48e767124758aeecc433360ddd85eaa6325b34d9.1627040189.git.leonro@nvidia.com Reviewed-by: Gal Pressman <galpress@amazon.com> #efa Tested-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> #rdma and core Tested-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-06-16RDMA: Remove rdma_set_device_sysfs_group()Jason Gunthorpe1-2/+1
The driver's device group can be specified as part of the ops structure like the device's port group. No need for the complicated API. Link: https://lore.kernel.org/r/8964785a34fd3a29ff5b6693493f575b717e594d.1623427137.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-05-01Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds3-7/+7
Pull rdma updates from Jason Gunthorpe: "This is significantly bug fixes and general cleanups. The noteworthy new features are fairly small: - XRC support for HNS and improves RQ operations - Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw and qib - Quite a few general cleanups on spelling, error handling, static checker detections, etc - Increase the number of device ports supported beyond 255. High port count software switches now exist - Several bug fixes for rtrs - mlx5 Device Memory support for host controlled atomics - Report SRQ tables through to rdma-tool" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (145 commits) IB/qib: Remove redundant assignment to ret RDMA/nldev: Add copy-on-fork attribute to get sys command RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res RDMA/siw: Fix a use after free in siw_alloc_mr IB/hfi1: Remove redundant variable rcd RDMA/nldev: Add QP numbers to SRQ information RDMA/nldev: Return SRQ information RDMA/restrack: Add support to get resource tracking for SRQ RDMA/nldev: Return context information RDMA/core: Add CM to restrack after successful attachment to a device RDMA/cma: Skip device which doesn't support CM RDMA/rxe: Fix a bug in rxe_fill_ip_info() RDMA/mlx5: Expose private query port RDMA/mlx4: Remove an unused variable RDMA/mlx5: Fix type assignment for ICM DM IB/mlx5: Set right RoCE l3 type and roce version while deleting GID RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails RDMA/cxgb4: add missing qpid increment IB/ipoib: Remove unnecessary struct declaration RDMA/bnxt_re: Get rid of custom module reference counting ...
2021-04-08treewide: Change list_sort to use const pointersSami Tolvanen1-1/+2
list_sort() internally casts the comparison function passed to it to a different type with constant struct list_head pointers, and uses this pointer to call the functions, which trips indirect call Control-Flow Integrity (CFI) checking. Instead of removing the consts, this change defines the list_cmp_func_t type and changes the comparison function types of all list_sort() callers to use const pointers, thus avoiding type mismatches. Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
2021-03-26RDMA: Support more than 255 rdma portsMark Bloch3-7/+7
Current code uses many different types when dealing with a port of a RDMA device: u8, unsigned int and u32. Switch to u32 to clean up the logic. This allows us to make (at least) the core view consistent and use the same type. Unfortunately not all places can be converted. Many uverbs functions expect port to be u8 so keep those places in order not to break UAPIs. HW/Spec defined values must also not be changed. With the switch to u32 we now can support devices with more than 255 ports. U32_MAX is reserved to make control logic a bit easier to deal with. As a device with U32_MAX ports probably isn't going to happen any time soon this seems like a non issue. When a device with more than 255 ports is created uverbs will report the RDMA device as having 255 ports as this is the max currently supported. The verbs interface is not changed yet because the IBTA spec limits the port size in too many places to be u8 and all applications that relies in verbs won't be able to cope with this change. At this stage, we are extending the interfaces that are using vendor channel solely Once the limitation is lifted mlx5 in switchdev mode will be able to have thousands of SFs created by the device. As the only instance of an RDMA device that reports more than 255 ports will be a representor device and it exposes itself as a RAW Ethernet only device CM/MAD/IPoIB and other ULPs aren't effected by this change and their sysfs/interfaces that are exposes to userspace can remain unchanged. While here cleanup some alignment issues and remove unneeded sanity checks (mainly in rdmavt), Link: https://lore.kernel.org/r/20210301070420.439400-1-leon@kernel.org Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-19RDMA/usnic: Fix misuse of sysfs_emit_atJoe Perches1-4/+3
In commit e28bf1f03b01 ("RDMA: Convert various random sprintf sysfs _show uses to sysfs_emit") I mistakenly used len = sysfs_emit_at to overwrite the last trailing space of potentially multiple entry output. Instead use a more common style by removing the trailing space from the output formats and adding a prefixing space to the contination formats and converting the final terminating output newline from the defective len = sysfs_emit_at(buf, len, "\n"); to the now appropriate and typical len += sysfs_emit_at(buf, len, "\n"); Fixes: e28bf1f03b01 ("RDMA: Convert various random sprintf sysfs _show uses to sysfs_emit") Link: https://lore.kernel.org/r/5eb794b9c9bca0494d94b2b209f1627fa4e7b555.camel@perches.com Reported-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-01-07RDMA/usnic: Fix memleak in find_free_vf_and_create_qp_grpDinghao Liu1-0/+3
If usnic_ib_qp_grp_create() fails at the first call, dev_list will not be freed on error, which leads to memleak. Fixes: e3cf00d0a87f ("IB/usnic: Add Cisco VIC low-level hardware driver") Link: https://lore.kernel.org/r/20201226074248.2893-1-dinghao.liu@zju.edu.cn Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-30RDMA: Convert various random sprintf sysfs _show uses to sysfs_emitJoe Perches1-19/+12
Manual changes for sysfs_emit as cocci scripts can't easily convert them. Link: https://lore.kernel.org/r/ecde7791467cddb570c6f6d2c908ffbab9145cac.1602122880.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-30RDMA: Manual changes for sysfs_emit and neateningJoe Perches1-33/+23
Make changes to use sysfs_emit in the RDMA code as cocci scripts can not be written to handle _all_ the possible variants of various sprintf family uses in sysfs show functions. While there, make the code more legible and update its style to be more like the typical kernel styles. Miscellanea: o Use intermediate pointers for dereferences o Add and use string lookup functions o return early when any intermediate call fails so normal return is at the bottom of the function o mlx4/mcg.c:sysfs_show_group: use scnprintf to format intermediate strings Link: https://lore.kernel.org/r/f5c9e4c9d8dafca1b7b70bd597ee7f8f219c31c8.1602122880.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Convert sysfs device * show functions to use sysfs_emit()Joe Perches1-9/+6
Done with cocci script: @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - sprintf(buf, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - snprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - scnprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> } @@ identifier d_show; identifier dev, attr, buf; expression chr; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... return - strcpy(buf, chr); + sysfs_emit(buf, chr); ...> } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - sprintf(buf, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - snprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... len = - scnprintf(buf, PAGE_SIZE, + sysfs_emit(buf, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; identifier len; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { <... - len += scnprintf(buf + len, PAGE_SIZE - len, + len += sysfs_emit_at(buf, len, ...); ...> return len; } @@ identifier d_show; identifier dev, attr, buf; expression chr; @@ ssize_t d_show(struct device *dev, struct device_attribute *attr, char *buf) { ... - strcpy(buf, chr); - return strlen(buf); + return sysfs_emit(buf, chr); } Link: https://lore.kernel.org/r/7f406fa8e3aa2552c022bec680f621e38d1fe414.1602122879.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Check create_flags during create_qpJason Gunthorpe1-1/+1
Each driver should check that the QP attrs create_flags is supported. Unfortuantely when create_flags was added to the QP attrs the drivers were not updated. uverbs_ex_cmd_mask was used to block it - even though kernel drivers use these flags too. Check that flags is zero in all drivers that don't use it, remove IB_USER_VERBS_EX_CMD_CREATE_QP from uverbs_ex_cmd_mask. Fix the error code to be EOPNOTSUPP. Link: https://lore.kernel.org/r/8-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Check flags during create_cqJason Gunthorpe1-1/+1
Each driver should check that the CQ attrs is supported. Unfortuantely when flags was added to the CQ attrs the drivers were not updated, uverbs_ex_cmd_mask was used to block it. This was missed when create CQ was converted to ioctl, so non-zero flags could have been passed into drivers. Check that flags is zero in all drivers that don't use it, remove IB_USER_VERBS_EX_CMD_CREATE_CQ from uverbs_ex_cmd_mask. Fixes: 41b2a71fc848 ("IB/uverbs: Move ioctl path of create_cq and destroy_cq to a new file") Link: https://lore.kernel.org/r/7-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Check attr_mask during modify_qpJason Gunthorpe1-0/+3
Each driver should check that it can support the provided attr_mask during modify_qp. IB_USER_VERBS_EX_CMD_MODIFY_QP was being used to block modify_qp_ex because the driver didn't check RATE_LIMIT. Link: https://lore.kernel.org/r/6-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Move more uverbs_cmd_mask settings to the coreJason Gunthorpe1-5/+0
These functions all depend on the driver providing a specific op: - REREG_MR is rereg_user_mr(). bnxt_re set this without providing the op - ATTACH/DEATCH_MCAST is attach_mcast()/detach_mcast(). usnic set this without providing the op - OPEN_QP doesn't involve the driver but requires a XRCD. qedr provides xrcd but forgot to set it, usnic doesn't provide XRCD but set it anyhow. - OPEN/CLOSE_XRCD are the ops alloc_xrcd()/dealloc_xrcd() - CREATE_SRQ/DESTROY_SRQ are the ops create_srq()/destroy_srq() - QUERY/MODIFY_SRQ is op query_srq()/modify_srq(). hns sets this but sometimes supplies a NULL op. - RESIZE_CQ is op resize_cq(). bnxt_re sets this boes doesn't supply an op - ALLOC/DEALLOC_MW is alloc_mw()/dealloc_mw(). cxgb4 provided an (now deleted) implementation but no userspace All drivers were checked that no drivers provide the op without also setting uverbs_cmd_mask so this should have no functional change. Link: https://lore.kernel.org/r/4-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-26RDMA: Remove elements in uverbs_cmd_mask that all drivers setJason Gunthorpe1-15/+1
This is a step toward eliminating uverbs_cmd_mask. Preset this list in the core code. Only the op reg_user_mr wasn't already being required from the drivers. Link: https://lore.kernel.org/r/3-v1-caa70ba3d1ab+1436e-ucmd_mask_jgg@nvidia.com Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-10-16RDMA: Explicitly pass in the dma_device to ib_register_deviceJason Gunthorpe1-1/+2
The code in setup_dma_device has become rather convoluted, move all of this to the drivers. Drives now pass in a DMA capable struct device which will be used to setup DMA, or drivers must fully configure the ibdev for DMA and pass in NULL. Other than setting the masks in rvt all drivers were doing this already anyhow. mthca, mlx4 and mlx5 were already setting up maximum DMA segment size for DMA based on their hardweare limits in: __mthca_init_one() dma_set_max_seg_size (1G) __mlx4_init_one() dma_set_max_seg_size (1G) mlx5_pci_init() set_dma_caps() dma_set_max_seg_size (2G) Other non software drivers (except usnic) were extended to UINT_MAX [1, 2] instead of 2G as was before. [1] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/ [2] https://lore.kernel.org/linux-rdma/20200924114940.GE9475@nvidia.com/ Link: https://lore.kernel.org/r/20201008082752.275846-1-leon@kernel.org Link: https://lore.kernel.org/r/6b2ed339933d066622d5715903870676d8cc523a.1602590106.git.mchehab+huawei@kernel.org Suggested-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA: Allow fail of destroy CQLeon Romanovsky2-3/+3
Like any other verbs objects, CQ shouldn't fail during destroy, but mlx5_ib didn't follow this contract with mixed IB verbs objects with DEVX. Such mix causes to the situation where FW and kernel are fully interdependent on the reference counting of each side. Kernel verbs and drivers that don't have DEVX flows shouldn't fail. Fixes: e39afe3d6dbd ("RDMA: Convert CQ allocations to be under core responsibility") Link: https://lore.kernel.org/r/20200907120921.476363-7-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-09-09RDMA: Restore ability to fail on PD deallocateLeon Romanovsky2-2/+3
The IB verbs objects are counted by the kernel and ib_core ensures that deallocate PD will success so it will be called once all other objects that depends on PD will be released. This is achieved by managing various reference counters on such objects. The mlx5 driver didn't follow this standard flow when allowed DEVX objects that are not managed by ib_core to be interleaved with the ones under ib_core responsibility. In such interleaved scenarios deallocate command can fail and ib_core will leave uobject in internal DB and attempt to clean it later to free resources anyway. This change partially restores returned value from dealloc_pd() for all drivers, but keeping in mind that non-DEVX devices and kernel verbs paths shouldn't fail. Fixes: 21a428a019c9 ("RDMA: Handle PD allocations by IB/core") Link: https://lore.kernel.org/r/20200907120921.476363-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-31Merge tag 'v5.9-rc3' into rdma.git for-nextJason Gunthorpe1-1/+1
Required due to dependencies in following patches. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-27RDMA/usnic: Remove the query_pkey callbackKamal Heib3-15/+0
Now that the query_pkey() isn't mandatory by the RDMA core, this callback can be removed from the usnic provider. The libfabric userspace never touches the pkey. Link: https://lore.kernel.org/r/20200820125346.111902-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-08-18RDMA/usnic: Fix spelling mistake "transistion" -> "transition"Colin Ian King1-1/+1
There is a spelling mistake in a usnic_err error message. Fix it. Link: https://lore.kernel.org/r/20200805141459.23069-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-07-16RDMA/usnic: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-2/+2
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script bellow. It has been compile tested. When memory is allocated, GFP_ATOMIC should be used to be consistent with the surrounding code. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Link: https://lore.kernel.org/r/20200711073120.249146-1-christophe.jaillet@wanadoo.fr Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-1/+1
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse1-2/+2
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02RDMA: Remove 'max_map_per_fmr'Jason Gunthorpe1-1/+0
Now that FMR support is gone, this attribute can be deleted from all places. Link: https://lore.kernel.org/r/13-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.com Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-03-04RDMA/providers: Fix return value when QP type isn't supportedKamal Heib1-1/+1
The proper return code is "-EOPNOTSUPP" when the requested QP type is not supported by the provider. Link: https://lore.kernel.org/r/20200130082049.463-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-20RDMA: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://lore.kernel.org/r/20200213010425.GA13068@embeddedor.com Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> # added a few more
2020-01-31mm, tree-wide: rename put_user_page*() to unpin_user_page*()John Hubbard1-1/+1
In order to provide a clearer, more symmetric API for pinning and unpinning DMA pages. This way, pin_user_pages*() calls match up with unpin_user_pages*() calls, and the API is a lot closer to being self-explanatory. Link: http://lkml.kernel.org/r/20200107224558.2362728-23-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31IB/{core,hw,umem}: set FOLL_PIN via pin_user_pages*(), fix up ODPJohn Hubbard1-1/+1
Convert infiniband to use the new pin_user_pages*() calls. Also, revert earlier changes to Infiniband ODP that had it using put_user_page(). ODP is "Case 3" in Documentation/core-api/pin_user_pages.rst, which is to say, normal get_user_pages() and put_page() is the API to use there. The new pin_user_pages*() calls replace corresponding get_user_pages*() calls, and set the FOLL_PIN flag. The FOLL_PIN flag requires that the caller must return the pages via put_user_page*() calls, but infiniband was already doing that as part of an earlier commit. Link: http://lkml.kernel.org/r/20200107224558.2362728-14-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-24mm/gup: add make_dirty arg to put_user_pages_dirty_lock()akpm@linux-foundation.org1-4/+1
[11~From: John Hubbard <jhubbard@nvidia.com> Subject: mm/gup: add make_dirty arg to put_user_pages_dirty_lock() Patch series "mm/gup: add make_dirty arg to put_user_pages_dirty_lock()", v3. There are about 50+ patches in my tree [2], and I'll be sending out the remaining ones in a few more groups: * The block/bio related changes (Jerome mostly wrote those, but I've had to move stuff around extensively, and add a little code) * mm/ changes * other subsystem patches * an RFC that shows the current state of the tracking patch set. That can only be applied after all call sites are converted, but it's good to get an early look at it. This is part a tree-wide conversion, as described in fc1d8e7cca2d ("mm: introduce put_user_page*(), placeholder versions"). This patch (of 3): Provide more capable variation of put_user_pages_dirty_lock(), and delete put_user_pages_dirty(). This is based on the following: 1. Lots of call sites become simpler if a bool is passed into put_user_page*(), instead of making the call site choose which put_user_page*() variant to call. 2. Christoph Hellwig's observation that set_page_dirty_lock() is usually correct, and set_page_dirty() is usually a bug, or at least questionable, within a put_user_page*() calling chain. This leads to the following API choices: * put_user_pages_dirty_lock(page, npages, make_dirty) * There is no put_user_pages_dirty(). You have to hand code that, in the rare case that it's required. [jhubbard@nvidia.com: remove unused variable in siw_free_plist()] Link: http://lkml.kernel.org/r/20190729074306.10368-1-jhubbard@nvidia.com Link: http://lkml.kernel.org/r/20190724044537.10458-2-jhubbard@nvidia.com Signed-off-by: John Hubbard <jhubbard@nvidia.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-13RDMA/usnic: Avoid overly large buffers on stackArnd Bergmann1-2/+8
It's never a good idea to put a 1000-byte buffer on the kernel stack. The compiler warns about this instance when usnic_ib_log_vf() gets inlined into usnic_ib_pci_probe(): drivers/infiniband/hw/usnic/usnic_ib_main.c:543:12: error: stack frame size of 1044 bytes in function 'usnic_ib_pci_probe' [-Werror,-Wframe-larger-than=] As this is only called for debugging purposes in the setup path, it's trivial to convert to a dynamic allocation. Link: https://lore.kernel.org/r/20190906155730.2750200-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-12RDMA: Introduce ib_port_phys_state enumKamal Heib1-3/+4
In order to improve readability, add ib_port_phys_state enum to replace the use of magic numbers. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Andrew Boyer <aboyer@tobark.org> Acked-by: Michal Kalderon <michal.kalderon@marvell.com> Acked-by: Bernard Metzler <bmt@zurich.ibm.com> Link: https://lore.kernel.org/r/20190807103138.17219-2-kamalheib1@gmail.com Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-25IB/usnic: Use dev_get_drvdataChuhong Yuan1-1/+1
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make the code simpler. Link: https://lore.kernel.org/r/20190723114928.18424-1-hslester96@gmail.com Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-07-15Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds5-26/+22
Pull rdma updates from Jason Gunthorpe: "A smaller cycle this time. Notably we see another new driver, 'Soft iWarp', and the deletion of an ancient unused driver for nes. - Revise and simplify the signature offload RDMA MR APIs - More progress on hoisting object allocation boiler plate code out of the drivers - Driver bug fixes and revisions for hns, hfi1, efa, cxgb4, qib, i40iw - Tree wide cleanups: struct_size, put_user_page, xarray, rst doc conversion - Removal of obsolete ib_ucm chardev and nes driver - netlink based discovery of chardevs and autoloading of the modules providing them - Move more of the rdamvt/hfi1 uapi to include/uapi/rdma - New driver 'siw' for software based iWarp running on top of netdev, much like rxe's software RoCE. - mlx5 feature to report events in their raw devx format to userspace - Expose per-object counters through rdma tool - Adaptive interrupt moderation for RDMA (DIM), sharing the DIM core from netdev" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (194 commits) RMDA/siw: Require a 64 bit arch RDMA/siw: Mark expected switch fall-throughs RDMA/core: Fix -Wunused-const-variable warnings rdma/siw: Remove set but not used variable 's' rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS RDMA/siw: Add missing rtnl_lock around access to ifa rdma/siw: Use proper enumerated type in map_cqe_status RDMA/siw: Remove unnecessary kthread create/destroy printouts IB/rdmavt: Fix variable shadowing issue in rvt_create_cq RDMA/core: Fix race when resolving IP address RDMA/core: Make rdma_counter.h compile stand alone IB/core: Work on the caller socket net namespace in nldev_newlink() RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM RDMA/mlx5: Set RDMA DIM to be enabled by default RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink RDMA/core: Provide RDMA DIM support for ULPs linux/dim: Implement RDMA adaptive moderation (DIM) IB/mlx5: Report correctly tag matching rendezvous capability docs: infiniband: add it to the driver-api bookset IB/mlx5: Implement VHCA tunnel mechanism in DEVX ...
2019-06-28Merge tag 'v5.2-rc6' into rdma.git for-nextJason Gunthorpe1-0/+1
For dependencies in next patches. Resolve conflicts: - Use uverbs_get_cleared_udata() with new cq allocation flow - Continue to delete nes despite SPDX conflict - Resolve list appends in mlx5_command_str() - Use u16 for vport_rule stuff - Resolve list appends in struct ib_client Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-11RDMA: Convert CQ allocations to be under core responsibilityLeon Romanovsky4-16/+12
Ensure that CQ is allocated and freed by IB/core and not by drivers. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Tested-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-11RDMA: Clean destroy CQ in drivers do not return errorsLeon Romanovsky2-4/+2
Like all other destroy commands, .destroy_cq() call is not supposed to fail. In all flows, the attempt to return earlier caused to memory leaks. This patch converts .destroy_cq() to do not return any errors. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Gal Pressman <galpress@amazon.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-06-10RDMA: Move owner into struct ib_device_opsJason Gunthorpe1-1/+1
This more closely follows how other subsytems work, with owner being a member of the structure containing the function pointers. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-10RDMA: Move uverbs_abi_ver into struct ib_device_opsJason Gunthorpe1-1/+1
No reason for every driver to emit code to set this, just make it part of the driver's existing static const ops structure. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-10RDMA: Move driver_id into struct ib_device_opsJason Gunthorpe1-1/+2
No reason for every driver to emit code to set this, just make it part of the driver's existing static const ops structure. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.