aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/input/serio/libps2.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-5/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07Input: libps2 - mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/input/serio/libps2.c: In function ‘ps2_handle_ack’: drivers/input/serio/libps2.c:407:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (ps2dev->flags & PS2_FLAG_NAK) { ^ drivers/input/serio/libps2.c:417:2: note: here case 0x00: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02Input: libps2 - relax command byte ACK handlingDmitry Torokhov1-3/+22
When we probe PS/2 devices we first issue "Get ID" command and only if we receive what we consider a valid keyboard or mouse ID we disable the device and continue with protocol detection. That means that the device may be transmitting motion or keystroke data, while we expect ACK response. Instead of signaling failure if we see anything but ACK/NAK let's ignore "garbage" response until we see ACK for the command byte (first byte). The checks for subsequent ACKs of command parameters will continue be strict. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02Input: libps2 - support retransmission of command dataDmitry Torokhov1-32/+71
The devices are allowed to respond to either command byte or command parameter with a NAK (0xfe), and the host is supposed to resend the "correct" byte. The device then will either respond with ACK or ERR (0xfc). Let's teach libps2 to handle the NAK responses properly, so that individual drivers do not need to handle them. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02Input: libps2 - add debugging statementsDmitry Torokhov1-13/+39
Debugging via i8042.debug and analyzing raw PS/2 data stream may be cumbersome as you need to locate the boundaries of commands, decipher the sliced commands, etc, etc. Let's add a bit more high level debug statements for ps2_sendbyte(), ps2_command(), and ps2_sliced_command(). We do not introduce a new module parameter, but rater rely on the kernel having dynamic debug facility enabled (which most everyone has nowadays). Enable with: echo "file libps2.c +pf" > /sys/kernel/debug/dynamic_debug/control or add "libps2.dyndbg=+pf" to the kernel command line. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02Input: psmouse - move sliced command implementation to libps2Dmitry Torokhov1-0/+32
In preparation to adding some debugging statements to PS/2 control sequences let's move psmouse_sliced_command() into libps2 and rename it to ps2_sliced_command(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02Input: libps2 - use u8 for byte dataDmitry Torokhov1-15/+16
Instead of using unsigned char for the byte data switch to using u8. Also use unsigned int for the command codes and timeouts, and have ps2_handle_ack() and ps2_handle_response() return bool instead of int, as they do not return error codes but rather signal whether a byte was handled or not handled. ps2_is_keyboard_id() now returns bool as well. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-02-02Input: libps2 - fix switch statement formattingDmitry Torokhov1-66/+65
Individual labels of switch statements should have the same indentation level as the switch statement itself. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-27Input: i8042 - break load dependency between atkbd/psmouse and i8042Dmitry Torokhov1-6/+4
As explained in 1407814240-4275-1-git-send-email-decui@microsoft.com we have a hard load dependency between i8042 and atkbd which prevents keyboard from working on Gen2 Hyper-V VMs. > hyperv_keyboard invokes serio_interrupt(), which needs a valid serio > driver like atkbd.c. atkbd.c depends on libps2.c because it invokes > ps2_command(). libps2.c depends on i8042.c because it invokes > i8042_check_port_owner(). As a result, hyperv_keyboard actually > depends on i8042.c. > > For a Generation 2 Hyper-V VM (meaning no i8042 device emulated), if a > Linux VM (like Arch Linux) happens to configure CONFIG_SERIO_I8042=m > rather than =y, atkbd.ko can't load because i8042.ko can't load(due to > no i8042 device emulated) and finally hyperv_keyboard can't work and > the user can't input: https://bugs.archlinux.org/task/39820 > (Ubuntu/RHEL/SUSE aren't affected since they use CONFIG_SERIO_I8042=y) To break the dependency we move away from using i8042_check_port_owner() and instead allow serio port owner specify a mutex that clients should use to serialize PS/2 command stream. Reported-by: Mark Laws <mdl@60hz.org> Tested-by: Mark Laws <mdl@60hz.org> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-09-29Input: psmouse - fix data race in __ps2_commandDmitry Vyukov1-8/+14
The data race happens on ps2dev->cmdcnt and ps2dev->cmdbuf contents. __ps2_command reads that data concurrently with the interrupt handler. As the result, for example, if a response arrives just after the timeout, __ps2_command can copy out garbage from ps2dev->cmdbuf but then see that ps2dev->cmdcnt is 0 and return success. Stop the interrupt handler with serio_pause_rx() before reading the results. The data race was found with KernelThreadSanitizer (KTSAN). Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-01-06Input: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2011-06-27Input: libps2.c: fix comment typo arrrives.Justin P. Mattock1-1/+1
Fix a typo in a comment. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.hTejun Heo1-1/+0
percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2009-10-11headers: remove sched.h from interrupt.hAlexey Dobriyan1-0/+1
After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-09-17Input: libps2 - additional locking for i8042 portsDmitry Torokhov1-4/+24
The serio ports on i8042 are not completely isolated; while we provide enough locking to ensure proper serialization when accessing control and data registers AUX and KBD ports can still have an effect on each other on PS/2 protocol level. The most prominent effect is that issuing a command for the device connected to one port may cause abort of the command currently executing by the device connected to another port. Since i8042 nor serio subsystem are not aware of the details of the PS/2 protocol (length of the commands and their replies and so on) the locking should be done on libps2 level by adding special handling when we see that we are dealing with serio port on i8042. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-08-19Input: add new driver for Sentelic Finger Sensing PadTai-hwa Liang1-3/+12
This is the driver for Sentelic Finger Sensing Pad which can be found on MSI WIND Netbook. Signed-off-by: Tai-hwa Liang <avatar@sentelic.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-05-28Input: libps2 - better handle bad scheduler decisionsDmitry Torokhov1-1/+1
Sometimes devices send us their responses in time but due to unfortunate scheduling decisions the receiving thread does not get scheduled till much later and we erroneously decide that device timed out. Work around this problem by checking whether we received the data we needed instead of checking timeout condition. Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-11-24Input: libps2 - handle 0xfc responses from devicesDmitry Torokhov1-4/+16
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-05-16Input: libps2 - remove delayed command executionDmitry Torokhov1-52/+0
Delayed command execution is not used by anyone so let's remove it. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-01-21Input: drop redundant includes of moduleparam.hJulia Lawall1-1/+0
Drop #include <linux/moduleparam.h> in files that also include linux/module.h, since module.h includes moduleparam.h already. Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-02-17Storage class should be before const qualifierTobias Klauser1-1/+1
The C99 specification states in section 6.11.5: The placement of a storage-class specifier other than at the beginning of the declaration specifiers in a declaration is an obsolescent feature. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-22WorkStruct: Pass the work_struct pointer instead of context dataDavid Howells1-3/+3
Pass the work_struct pointer to the work function rather than context data. The work function can use container_of() to work out the data. For the cases where the container of the work_struct may go away the moment the pending bit is cleared, it is made possible to defer the release of the structure by deferring the clearing of the pending bit. To make this work, an extra flag is introduced into the management side of the work_struct. This governs auto-release of the structure upon execution. Ordinarily, the work queue executor would release the work_struct for further scheduling or deallocation by clearing the pending bit prior to jumping to the work function. This means that, unless the driver makes some guarantee itself that the work_struct won't go away, the work function may not access anything else in the work_struct or its container lest they be deallocated.. This is a problem if the auxiliary data is taken away (as done by the last patch). However, if the pending bit is *not* cleared before jumping to the work function, then the work function *may* access the work_struct and its container with no problems. But then the work function must itself release the work_struct by calling work_release(). In most cases, automatic release is fine, so this is the default. Special initiators exist for the non-auto-release case (ending in _NAR). Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-11Input: serio - add lockdep annotationsJiri Kosina1-1/+2
Signed-off-by: Jiri Kosina <jikos@jikos.cz> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-09-14Input: libps2 - rearrange exportsDmitry Torokhov1-11/+9
The new way is to mark function as exported right after its definition. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-09-14Input: atkbd - support Microsoft Natural Elite Pro keyboardsDmitry Torokhov1-2/+16
Microsoft Natural Elite Pro keyboard produces unisual response to the GET ID command - single byte 0xaa (normally keyboards produce 2-byte response). Fail GET ID command so atkbd gets a change to do alternate probe. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-06Input: libps2 - warn instead of oopsing when passed bad argumentsDmitry Torokhov1-0/+5
This is more user-friendly and also fixes Coverity #id 249 Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-07-03[PATCH] lockdep: annotate serioArjan van de Ven1-1/+1
The PS/2 code has a natural device order and there is a one level recursion in this device order in terms of the cmd_mutex; annotate this explicit recursion as ok. Has no effect on non-lockdep kernels. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-19Input: serio - semaphore to mutex conversionArjan van de Ven1-5/+5
The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-06-01Input: cleanup ps2_command() timeout handling in libps2.Dmitry Torokhov1-28/+62
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-06-01Input: add ps2_drain() to libps2 to allow reading and discardingDmitry Torokhov1-8/+38
given number of bytes from device. Change ps2_command to allow using 0 as command ID and actually pass it to the device instead of working as a drain. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2005-04-16Linux-2.6.12-rc2Linus Torvalds1-0/+305
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!