aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/md/md.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-08-18Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds1-22/+22
Pull input updates from Dmitry Torokhov: - a new driver for Rohm BU21029 touch controller - new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free - updates to Atmel, eeti. pxrc and iforce drivers - assorted driver cleanups and fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits) MAINTAINERS: Add PhoenixRC Flight Controller Adapter Input: do not use WARN() in input_alloc_absinfo() Input: mark expected switch fall-throughs Input: raydium_i2c_ts - use true and false for boolean values Input: evdev - switch to bitmap API Input: gpio-keys - switch to bitmap_zalloc() Input: elan_i2c_smbus - cast sizeof to int for comparison bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free() md: Avoid namespace collision with bitmap API dm: Avoid namespace collision with bitmap API Input: pm8941-pwrkey - add resin entry Input: pm8941-pwrkey - abstract register offsets and event code Input: iforce - reorganize joystick configuration lists Input: atmel_mxt_ts - move completion to after config crc is updated Input: atmel_mxt_ts - don't report zero pressure from T9 Input: atmel_mxt_ts - zero terminate config firmware file Input: atmel_mxt_ts - refactor config update code to add context struct Input: atmel_mxt_ts - config CRC may start at T71 Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE ...
2018-08-14Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds1-0/+17
Pull MD updates from Shaohua Li: "A few MD fixes for 4.19-rc1: - several md-cluster fixes from Guoqing - a data corruption fix from BingJing - other cleanups" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/raid5: fix data corruption of replacements after originals dropped drivers/md/raid5: Do not disable irq on release_inactive_stripe_list() call drivers/md/raid5: Use irqsave variant of atomic_dec_and_lock() md/r5cache: remove redundant pointer bio md-cluster: don't send msg if array is closing md-cluster: show array's status more accurate md-cluster: clear another node's suspend_area after the copy is finished
2018-08-01md: Avoid namespace collision with bitmap APIAndy Shevchenko1-22/+22
bitmap API (include/linux/bitmap.h) has 'bitmap' prefix for its methods. On the other hand MD bitmap API is special case. Adding 'md' prefix to it to avoid name space collision. No functional changes intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Shaohua Li <shli@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-07-24md: remove a bogus commentChristoph Hellwig1-4/+0
The function name mentioned doesn't exist, and the code next to it doesn't match the description either. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-18block: Add and use op_stat_group() for indexing disk_stat fields.Michael Callahan1-2/+3
Add and use a new op_stat_group() function for indexing partition stat fields rather than indexing them by rq_data_dir() or bio_data_dir(). This function works similarly to op_is_sync() in that it takes the request::cmd_flags or bio::bi_opf flags and determines which stats should et updated. In addition, the second parameter to generic_start_io_acct() and generic_end_io_acct() is now a REQ_OP rather than simply a read or write bit and it uses op_stat_group() on the parameter to determine the stat group. Note that the partition in_flight counts are not part of the per-cpu statistics and as such are not indexed via this function. It's now indexed by op_is_write(). tj: Refreshed on top of v4.17. Updated to pass around REQ_OP. Signed-off-by: Michael Callahan <michaelcallahan@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Matias Bjorling <mb@lightnvm.io> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Alasdair Kergon <agk@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-18block: Add part_stat_read_accum to read across field entries.Michael Callahan1-2/+1
Add a part_stat_read_accum macro to genhd.h to read and sum across field entries. For example to sum up the number read and write sectors completed. In addition to being ar reasonable cleanup by itself this will make it easier to add new stat fields in the future. tj: Refreshed on top of v4.17. Signed-off-by: Michael Callahan <michaelcallahan@fb.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-05md-cluster: show array's status more accurateGuoqing Jiang1-0/+17
When resync or recovery is happening in one node, other nodes don't show the appropriate info now. For example, when create an array in master node without "--assume-clean", then assemble the array in slave nodes, you can see "resync=PENDING" when read /proc/mdstat in slave nodes. However, the info is confusing since "PENDING" status is introduced for start array in read-only mode. We introduce RESYNCING_REMOTE flag to indicate that resync thread is running in remote node. The flags is set when node receive RESYNCING msg. And we clear the REMOTE flag in following cases: 1. resync or recover is finished in master node, which means slaves receive msg with both lo and hi are set to 0. 2. node continues resync/recovery in recover_bitmaps. 3. when resync_finish is called. Then we show accurate information in status_resync by check REMOTE flags and with other conditions. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-06-18MD: cleanup resources in failureShaohua Li1-3/+5
We need destroy the memory pool in failure Signed-off-by: Shaohua Li <shli@fb.com>
2018-06-09Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds1-54/+115
Pull MD updates from Shaohua Li: "A few fixes of MD for this merge window. Mostly bug fixes: - raid5 stripe batch fix from Amy - Read error handling for raid1 FailFast device from Gioh - raid10 recovery NULL pointer dereference fix from Guoqing - Support write hint for raid5 stripe cache from Mariusz - Fixes for device hot add/remove from Neil and Yufen - Improve flush bio scalability from Xiao" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: MD: fix lock contention for flush bios md/raid5: Assigning NULL to sh->batch_head before testing bit R5_Overlap of a stripe md/raid1: add error handling of read error from FailFast device md: fix NULL dereference of mddev->pers in remove_and_add_spares() raid5: copy write hint from origin bio to stripe md: fix two problems with setting the "re-add" device state. raid10: check bio in r10buf_pool_free to void NULL pointer dereference md: fix an error code format and remove unsed bio_sector
2018-06-08md: Unify mddev destruction pathsKent Overstreet1-35/+18
Previously, mddev_put() had a couple different paths for freeing a mddev, due to the fact that the kobject wasn't initialized when the mddev was first allocated. If we move the kobject_init() to when it's first allocated and just use kobject_add() later, we can clean all this up. This also removes a hack in mddev_put() to avoid freeing biosets under a spinlock, which involved copying biosets on the stack after the reset bioset_init() changes. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-30md: convert to bioset_init()/mempool_init()Kent Overstreet1-37/+24
Convert md to embedded bio sets. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-21MD: fix lock contention for flush biosXiao Ni1-53/+105
There is a lock contention when there are many processes which send flush bios to md device. eg. Create many lvs on one raid device and mkfs.xfs on each lv. Now it just can handle flush request sequentially. It needs to wait mddev->flush_bio to be NULL, otherwise get mddev->lock. This patch remove mddev->flush_bio and handle flush bio asynchronously. I did a test with command dbench -s 128 -t 300. This is the test result: =================Without the patch============================ Operation Count AvgLat MaxLat -------------------------------------------------- Flush 11165 167.595 5879.560 Close 107469 1.391 2231.094 LockX 384 0.003 0.019 Rename 5944 2.141 1856.001 ReadX 208121 0.003 0.074 WriteX 98259 1925.402 15204.895 Unlink 25198 13.264 3457.268 UnlockX 384 0.001 0.009 FIND_FIRST 47111 0.012 0.076 SET_FILE_INFORMATION 12966 0.007 0.065 QUERY_FILE_INFORMATION 27921 0.004 0.085 QUERY_PATH_INFORMATION 124650 0.005 5.766 QUERY_FS_INFORMATION 22519 0.003 0.053 NTCreateX 141086 4.291 2502.812 Throughput 3.7181 MB/sec (sync open) 128 clients 128 procs max_latency=15204.905 ms =================With the patch============================ Operation Count AvgLat MaxLat -------------------------------------------------- Flush 4500 174.134 406.398 Close 48195 0.060 467.062 LockX 256 0.003 0.029 Rename 2324 0.026 0.360 ReadX 78846 0.004 0.504 WriteX 66832 562.775 1467.037 Unlink 5516 3.665 1141.740 UnlockX 256 0.002 0.019 FIND_FIRST 16428 0.015 0.313 SET_FILE_INFORMATION 6400 0.009 0.520 QUERY_FILE_INFORMATION 17865 0.003 0.089 QUERY_PATH_INFORMATION 47060 0.078 416.299 QUERY_FS_INFORMATION 7024 0.004 0.032 NTCreateX 55921 0.854 1141.452 Throughput 11.744 MB/sec (sync open) 128 clients 128 procs max_latency=1467.041 ms The test is done on raid1 disk with two rotational disks V5: V4 is more complicated than the version with memory pool. So revert to the memory pool version V4: use address of fbio to do hash to choose free flush info. V3: Shaohua suggests mempool is overkill. In v3 it allocs memory during creating raid device and uses a simple bitmap to record which resource is free. Fix a bug from v2. It should set flush_pending to 1 at first. V2: Neil pointed out two problems. One is counting error problem and another is return value when allocat memory fails. 1. counting error problem This isn't safe. It is only safe to call rdev_dec_pending() on rdevs that you previously called atomic_inc(&rdev->nr_pending); If an rdev was added to the list between the start and end of the flush, this will do something bad. Now it doesn't use bio_chain. It uses specified call back function for each flush bio. 2. Returned on IO error when kmalloc fails is wrong. I use mempool suggested by Neil in V2 3. Fixed some places pointed by Guoqing Suggested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-05-17md: fix NULL dereference of mddev->pers in remove_and_add_spares()Yufen Yu1-0/+3
We met NULL pointer BUG as follow: [ 151.760358] BUG: unable to handle kernel NULL pointer dereference at 0000000000000060 [ 151.761340] PGD 80000001011eb067 P4D 80000001011eb067 PUD 1011ea067 PMD 0 [ 151.762039] Oops: 0000 [#1] SMP PTI [ 151.762406] Modules linked in: [ 151.762723] CPU: 2 PID: 3561 Comm: mdadm-test Kdump: loaded Not tainted 4.17.0-rc1+ #238 [ 151.763542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014 [ 151.764432] RIP: 0010:remove_and_add_spares.part.56+0x13c/0x3a0 [ 151.765061] RSP: 0018:ffffc90001d7fcd8 EFLAGS: 00010246 [ 151.765590] RAX: 0000000000000000 RBX: ffff88013601d600 RCX: 0000000000000000 [ 151.766306] RDX: 0000000000000000 RSI: ffff88013601d600 RDI: ffff880136187000 [ 151.767014] RBP: ffff880136187018 R08: 0000000000000003 R09: 0000000000000051 [ 151.767728] R10: ffffc90001d7fed8 R11: 0000000000000000 R12: ffff88013601d600 [ 151.768447] R13: ffff8801298b1300 R14: ffff880136187000 R15: 0000000000000000 [ 151.769160] FS: 00007f2624276700(0000) GS:ffff88013ae80000(0000) knlGS:0000000000000000 [ 151.769971] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 151.770554] CR2: 0000000000000060 CR3: 0000000111aac000 CR4: 00000000000006e0 [ 151.771272] Call Trace: [ 151.771542] md_ioctl+0x1df2/0x1e10 [ 151.771906] ? __switch_to+0x129/0x440 [ 151.772295] ? __schedule+0x244/0x850 [ 151.772672] blkdev_ioctl+0x4bd/0x970 [ 151.773048] block_ioctl+0x39/0x40 [ 151.773402] do_vfs_ioctl+0xa4/0x610 [ 151.773770] ? dput.part.23+0x87/0x100 [ 151.774151] ksys_ioctl+0x70/0x80 [ 151.774493] __x64_sys_ioctl+0x16/0x20 [ 151.774877] do_syscall_64+0x5b/0x180 [ 151.775258] entry_SYSCALL_64_after_hwframe+0x44/0xa9 For raid6, when two disk of the array are offline, two spare disks can be added into the array. Before spare disks recovery completing, system reboot and mdadm thinks it is ok to restart the degraded array by md_ioctl(). Since disks in raid6 is not only_parity(), raid5_run() will abort, when there is no PPL feature or not setting 'start_dirty_degraded' parameter. Therefore, mddev->pers is NULL. But, mddev->raid_disks has been set and it will not be cleared when raid5_run abort. md_ioctl() can execute cmd 'HOT_REMOVE_DISK' to remove a disk by mdadm, which will cause NULL pointer dereference in remove_and_add_spares() finally. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-05-01md: fix two problems with setting the "re-add" device state.NeilBrown1-1/+3
If "re-add" is written to the "state" file for a device which is faulty, this has an effect similar to removing and re-adding the device. It should take up the same slot in the array that it previously had, and an accelerated (e.g. bitmap-based) rebuild should happen. The slot that "it previously had" is determined by rdev->saved_raid_disk. However this is not set when a device fails (only when a device is added), and it is cleared when resync completes. This means that "re-add" will normally work once, but may not work a second time. This patch includes two fixes. 1/ when a device fails, record the ->raid_disk value in ->saved_raid_disk before clearing ->raid_disk 2/ when "re-add" is written to a device for which ->saved_raid_disk is not set, fail. I think this is suitable for stable as it can cause re-adding a device to be forced to do a full resync which takes a lot longer and so puts data at more risk. Cc: <stable@vger.kernel.org> (v4.1) Fixes: 97f6cd39da22 ("md-cluster: re-add capabilities") Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-04-09md-cluster: don't update recovery_offset for faulty deviceGuoqing Jiang1-2/+4
Device could become faulty when clustered array handling METADATA_UPDATED msg, so we don't need to call read_rdev for this device. Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2018-04-05Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-blockLinus Torvalds1-5/+5
Pull block layer updates from Jens Axboe: "It's a pretty quiet round this time, which is nice. This contains: - series from Bart, cleaning up the way we set/test/clear atomic queue flags. - series from Bart, fixing races between gendisk and queue registration and removal. - set of bcache fixes and improvements from various folks, by way of Michael Lyle. - set of lightnvm updates from Matias, most of it being the 1.2 to 2.0 transition. - removal of unused DIO flags from Nikolay. - blk-mq/sbitmap memory ordering fixes from Omar. - divide-by-zero fix for BFQ from Paolo. - minor documentation patches from Randy. - timeout fix from Tejun. - Alpha "can't write a char atomically" fix from Mikulas. - set of NVMe fixes by way of Keith. - bsg and bsg-lib improvements from Christoph. - a few sed-opal fixes from Jonas. - cdrom check-disk-change deadlock fix from Maurizio. - various little fixes, comment fixes, etc from various folks" * tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits) blk-mq: Directly schedule q->timeout_work when aborting a request blktrace: fix comment in blktrace_api.h lightnvm: remove function name in strings lightnvm: pblk: remove some unnecessary NULL checks lightnvm: pblk: don't recover unwritten lines lightnvm: pblk: implement 2.0 support lightnvm: pblk: implement get log report chunk lightnvm: pblk: rename ppaf* to addrf* lightnvm: pblk: check for supported version lightnvm: implement get log report chunk helpers lightnvm: make address conversions depend on generic device lightnvm: add support for 2.0 address format lightnvm: normalize geometry nomenclature lightnvm: complete geo structure with maxoc* lightnvm: add shorten OCSSD version in geo lightnvm: add minor version to generic geometry lightnvm: simplify geometry structure lightnvm: pblk: refactor init/exit sequences lightnvm: Avoid validation of default op value lightnvm: centralize permission check for lightnvm ioctl ...
2018-03-08block: Use blk_queue_flag_*() in drivers instead of queue_flag_*()Bart Van Assche1-2/+2
This patch has been generated as follows: for verb in set_unlocked clear_unlocked set clear; do replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \ $(git grep -lw queue_flag_${verb} drivers block/bsg*) done Except for protecting all queue flag changes with the queue lock this patch does not change any functionality. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-28md: Delete gendisk before cleaning up the request queueBart Van Assche1-3/+3
Remove the disk, partition and bdi sysfs attributes before cleaning up the request queue associated with the disk. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Cc: Shaohua Li <shli@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-25md: fix a potential deadlock of raid5/raid10 reshapeBingJing Chang1-0/+13
There is a potential deadlock if mount/umount happens when raid5_finish_reshape() tries to grow the size of emulated disk. How the deadlock happens? 1) The raid5 resync thread finished reshape (expanding array). 2) The mount or umount thread holds VFS sb->s_umount lock and tries to write through critical data into raid5 emulated block device. So it waits for raid5 kernel thread handling stripes in order to finish it I/Os. 3) In the routine of raid5 kernel thread, md_check_recovery() will be called first in order to reap the raid5 resync thread. That is, raid5_finish_reshape() will be called. In this function, it will try to update conf and call VFS revalidate_disk() to grow the raid5 emulated block device. It will try to acquire VFS sb->s_umount lock. The raid5 kernel thread cannot continue, so no one can handle mount/ umount I/Os (stripes). Once the write-through I/Os cannot be finished, mount/umount will not release sb->s_umount lock. The deadlock happens. The raid5 kernel thread is an emulated block device. It is responible to handle I/Os (stripes) from upper layers. The emulated block device should not request any I/Os on itself. That is, it should not call VFS layer functions. (If it did, it will try to acquire VFS locks to guarantee the I/Os sequence.) So we have the resync thread to send resync I/O requests and to wait for the results. For solving this potential deadlock, we can put the size growth of the emulated block device as the final step of reshape thread. 2017/12/29: Thanks to Guoqing Jiang <gqjiang@suse.com>, we confirmed that there is the same deadlock issue in raid10. It's reproducible and can be fixed by this patch. For raid10.c, we can remove the similar code to prevent deadlock as well since they has been called before. Reported-by: Alex Wu <alexwu@synology.com> Reviewed-by: Alex Wu <alexwu@synology.com> Reviewed-by: Chung-Chiang Cheng <cccheng@synology.com> Signed-off-by: BingJing Chang <bingjingc@synology.com> Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
2018-02-19md: only allow remove_and_add_spares when no sync_thread running.NeilBrown1-0/+4
The locking protocols in md assume that a device will never be removed from an array during resync/recovery/reshape. When that isn't happening, rcu or reconfig_mutex is needed to protect an rdev pointer while taking a refcount. When it is happening, that protection isn't needed. Unfortunately there are cases were remove_and_add_spares() is called when recovery might be happening: is state_store(), slot_store() and hot_remove_disk(). In each case, this is just an optimization, to try to expedite removal from the personality so the device can be removed from the array. If resync etc is happening, we just have to wait for md_check_recover to find a suitable time to call remove_and_add_spares(). This optimization and not essential so it doesn't matter if it fails. So change remove_and_add_spares() to abort early if resync/recovery/reshape is happening, unless it is called from md_check_recovery() as part of a newly started recovery. The parameter "this" is only NULL when called from md_check_recovery() so when it is NULL, there is no need to abort. As this can result in a NULL dereference, the fix is suitable for -stable. cc: yuyufen <yuyufen@huawei.com> Cc: Tomasz Majchrzak <tomasz.majchrzak@intel.com> Fixes: 8430e7e0af9a ("md: disconnect device from personality before trying to remove it.") Cc: stable@ver.kernel.org (v4.8+) Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
2018-02-18md: fix md_write_start() deadlock w/o metadata devicesHeinz Mauelshagen1-0/+10
If no metadata devices are configured on raid1/4/5/6/10 (e.g. via dm-raid), md_write_start() unconditionally waits for superblocks to be written thus deadlocking. Fix introduces mddev->has_superblocks bool, defines it in md_run() and checks for it in md_write_start() to conditionally avoid waiting. Once on it, check for non-existing superblocks in md_super_write(). Link: https://bugzilla.kernel.org/show_bug.cgi?id=198647 Fixes: cc27b0c78c796 ("md: fix deadlock between mddev_suspend() and md_write_start()") Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
2018-02-17MD: Free bioset when md_run failsXiao Ni1-5/+21
Signed-off-by: Xiao Ni <xni@redhat.com> Acked-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-3/+3
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-31Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds1-8/+23
Pull MD updates from Shaohua Li: "Some small fixes for MD: - fix raid5-cache potential problems if raid5 cache isn't fully recovered - fix a wait-within-wait warning in raid1/10 - make raid5-PPL support disks with writeback cache enabled" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: raid5-ppl: PPL support for disks with write-back cache enabled md/r5cache: print more info of log recovery md/raid1,raid10: silence warning about wait-within-wait md: introduce new personality funciton start()
2018-01-30Merge branch 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-2/+2
Pull poll annotations from Al Viro: "This introduces a __bitwise type for POLL### bitmap, and propagates the annotations through the tree. Most of that stuff is as simple as 'make ->poll() instances return __poll_t and do the same to local variables used to hold the future return value'. Some of the obvious brainos found in process are fixed (e.g. POLLIN misspelled as POLL_IN). At that point the amount of sparse warnings is low and most of them are for genuine bugs - e.g. ->poll() instance deciding to return -EINVAL instead of a bitmap. I hadn't touched those in this series - it's large enough as it is. Another problem it has caught was eventpoll() ABI mess; select.c and eventpoll.c assumed that corresponding POLL### and EPOLL### were equal. That's true for some, but not all of them - EPOLL### are arch-independent, but POLL### are not. The last commit in this series separates userland POLL### values from the (now arch-independent) kernel-side ones, converting between them in the few places where they are copied to/from userland. AFAICS, this is the least disruptive fix preserving poll(2) ABI and making epoll() work on all architectures. As it is, it's simply broken on sparc - try to give it EPOLLWRNORM and it will trigger only on what would've triggered EPOLLWRBAND on other architectures. EPOLLWRBAND and EPOLLRDHUP, OTOH, are never triggered at all on sparc. With this patch they should work consistently on all architectures" * 'misc.poll' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (37 commits) make kernel-side POLL... arch-independent eventpoll: no need to mask the result of epi_item_poll() again eventpoll: constify struct epoll_event pointers debugging printk in sg_poll() uses %x to print POLL... bitmap annotate poll(2) guts 9p: untangle ->poll() mess ->si_band gets POLL... bitmap stored into a user-visible long field ring_buffer_poll_wait() return value used as return value of ->poll() the rest of drivers/*: annotate ->poll() instances media: annotate ->poll() instances fs: annotate ->poll() instances ipc, kernel, mm: annotate ->poll() instances net: annotate ->poll() instances apparmor: annotate ->poll() instances tomoyo: annotate ->poll() instances sound: annotate ->poll() instances acpi: annotate ->poll() instances crypto: annotate ->poll() instances block: annotate ->poll() instances x86: annotate ->poll() instances ...
2018-01-15raid5-ppl: PPL support for disks with write-back cache enabledTomasz Majchrzak1-2/+3
In order to provide data consistency with PPL for disks with write-back cache enabled all data has to be flushed to disks before next PPL entry. The disks to be flushed are marked in the bitmap. It's modified under a mutex and it's only read after PPL io unit is submitted. A limitation of 64 disks in the array has been introduced to keep data structures and implementation simple. RAID5 arrays with so many disks are not likely due to high risk of multiple disks failure. Such restriction should not be a real life limitation. With write-back cache disabled next PPL entry is submitted when data write for current one completes. Data flush defers next log submission so trigger it when there are no stripes for handling found. As PPL assures all data is flushed to disk at request completion, just acknowledge flush request when PPL is enabled. Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com> Signed-off-by: Shaohua Li <sh.li@alibaba-inc.com>
2017-12-11md: introduce new personality funciton start()Song Liu1-6/+20
In do_md_run(), md threads should not wake up until the array is fully initialized in md_run(). However, in raid5_run(), raid5-cache may wake up mddev->thread to flush stripes that need to be written back. This design doesn't break badly right now. But it could lead to bad bug in the future. This patch tries to resolve this problem by splitting start up work into two personality functions, run() and start(). Tasks that do not require the md threads should go into run(), while task that require the md threads go into start(). r5l_load_log() is moved to raid5_start(), so it is not called until the md threads are started in do_md_run(). Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-12-01md: limit mdstat resync progress to max_sectorsNate Dailey1-1/+3
There is a small window near the end of md_do_sync where mddev->curr_resync can be equal to MaxSector. If status_resync is called during this window, the resulting /proc/mdstat output contains a HUGE number of = signs due to the very large curr_resync: Personalities : [raid1] md123 : active raid1 sdd3[2] sdb3[0] 204736 blocks super 1.0 [2/1] [U_] [===================================================================== ... (82 MB more) ... ================>] recovery =429496729.3% (9223372036854775807/204736) finish=0.2min speed=12796K/sec bitmap: 0/1 pages [0KB], 65536KB chunk Modify status_resync to ensure the resync variable doesn't exceed the array's max_sectors. Signed-off-by: Nate Dailey <nate.dailey@stratus.com> Acked-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro1-2/+2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-17Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-5/+4
Pull more block layer updates from Jens Axboe: "A followup pull request, with some parts that either needed a bit more testing before going in, merge sync, or just later arriving fixes. This contains: - Timer related updates from Kees. These were purposefully delayed since I didn't want to pull in a later v4.14-rc tag to my block tree. - ide-cd prep sense buffer fix from Bart. Also delayed, as not to clash with the late fix we put into 4.14-rc. - Small BFQ updates series from Luca and Paolo. - Single nvmet fix from James, fixing a non-functional case there. - Bio fast clone fix from Michael, which made bcache return the wrong data for some cases. - Legacy IO path regression hang fix from Ming" * 'for-linus' of git://git.kernel.dk/linux-block: bio: ensure __bio_clone_fast copies bi_partno nvmet_fc: fix better length checking block: wake up all tasks blocked in get_request() block, bfq: move debug blkio stats behind CONFIG_DEBUG_BLK_CGROUP block, bfq: update blkio stats outside the scheduler lock block, bfq: add missing invocations of bfqg_stats_update_io_add/remove doc, block, bfq: update max IOPS sustainable with BFQ ide: Make ide_cdrom_prep_fs() initialize the sense buffer pointer md: Convert timers to use timer_setup() block: swim3: Convert timers to use timer_setup() block/aoe: Convert timers to use timer_setup() amifloppy: Convert timers to use timer_setup() block/floppy: Convert callback to pass timer_list
2017-11-15Merge tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linuxLinus Torvalds1-3/+3
Pull module updates from Jessica Yu: "Summary of modules changes for the 4.15 merge window: - treewide module_param_call() cleanup, fix up set/get function prototype mismatches, from Kees Cook - minor code cleanups" * tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Do not paper over type mismatches in module_param_call() treewide: Fix function prototypes for module_param_call() module: Prepare to convert all module_param_call() prototypes kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
2017-11-14md: Convert timers to use timer_setup()Kees Cook1-5/+4
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Shaohua Li <shli@kernel.org> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: linux-bcache@vger.kernel.org Cc: linux-raid@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-14Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/mdLinus Torvalds1-53/+94
Pull MD update from Shaohua Li: "This update mostly includes bug fixes: - md-cluster now supports raid10 from Guoqing - raid5 PPL fixes from Artur - badblock regression fix from Bo - suspend hang related fixes from Neil - raid5 reshape fixes from Neil - raid1 freeze deadlock fix from Nate - memleak fixes from Zdenek - bitmap related fixes from Me and Tao - other fixes and cleanups" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: (33 commits) md: free unused memory after bitmap resize md: release allocated bitset sync_set md/bitmap: clear BITMAP_WRITE_ERROR bit before writing it to sb md: be cautious about using ->curr_resync_completed for ->recovery_offset badblocks: fix wrong return value in badblocks_set if badblocks are disabled md: don't check MD_SB_CHANGE_CLEAN in md_allow_write md-cluster: update document for raid10 md: remove redundant variable q raid1: remove obsolete code in raid1_write_request md-cluster: Use a small window for raid10 resync md-cluster: Suspend writes in RAID10 if within range md-cluster/raid10: set "do_balance = 0" if area is resyncing md: use lockdep_assert_held raid1: prevent freeze_array/wait_all_barriers deadlock md: use TASK_IDLE instead of blocking signals md: remove special meaning of ->quiesce(.., 2) md: allow metadata update while suspending. md: use mddev_suspend/resume instead of ->quiesce() md: move suspend_hi/lo handling into core md code md: don't call bitmap_create() while array is quiesced. ...
2017-11-10md: release allocated bitset sync_setZdenek Kabelac1-1/+7
Patch fixes kmemleak on md_stop() path used likely only by dm-raid wrapper. Code of md is using mddev_put() where both bitsets are released however this freeing is not shared. Also set NULL to bio_set and sync_set pointers just like mddev_put is doing. Signed-off-by: Zdenek Kabelac <zkabelac@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-09md: be cautious about using ->curr_resync_completed for ->recovery_offsetNeilBrown1-11/+22
The ->recovery_offset shows how much of a non-InSync device is actually in sync - how much has been recoveryed. When performing a recovery, ->curr_resync and ->curr_resync_completed follow the device address being recovered and so can be used to update ->recovery_offset. When performing a reshape, ->curr_resync* might follow the device addresses (raid5) or might follow array addresses (raid10), so cannot in general be used to set ->recovery_offset. When reshaping backwards, ->curre_resync* measures from the *end* of the array-or-device, so is particularly unhelpful. So change the common code in md.c to only use ->curr_resync_complete for the simple recovery case, and add code to raid5.c to update ->recovery_offset during a forwards reshape. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-01md: don't check MD_SB_CHANGE_CLEAN in md_allow_writeArtur Paszkiewicz1-1/+0
Only MD_SB_CHANGE_PENDING should be used to wait for transition from clean to dirty. Checking also MD_SB_CHANGE_CLEAN is unnecessary and can race with e.g. md_do_sync(). This sporadically causes a hang when changing consistency policy during resync: INFO: task mdadm:6183 blocked for more than 30 seconds. Not tainted 4.14.0-rc3+ #391 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. mdadm D12752 6183 6022 0x00000000 Call Trace: __schedule+0x93f/0x990 schedule+0x6b/0x90 md_allow_write+0x100/0x130 [md_mod] ? do_wait_intr_irq+0x90/0x90 resize_stripes+0x3a/0x5b0 [raid456] ? kernfs_fop_write+0xbe/0x180 raid5_change_consistency_policy+0xa6/0x200 [raid456] consistency_policy_store+0x2e/0x70 [md_mod] md_attr_store+0x90/0xc0 [md_mod] sysfs_kf_write+0x42/0x50 kernfs_fop_write+0x119/0x180 __vfs_write+0x28/0x110 ? rcu_sync_lockdep_assert+0x12/0x60 ? __sb_start_write+0x15a/0x1c0 ? vfs_write+0xa3/0x1a0 vfs_write+0xb4/0x1a0 SyS_write+0x49/0xa0 entry_SYSCALL_64_fastpath+0x18/0xad Fixes: 2214c260c72b ("md: don't return -EAGAIN in md_allow_write for external metadata arrays") Cc: <stable@vger.kernel.org> Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-01md: use lockdep_assert_heldShaohua Li1-2/+2
lockdep_assert_held is a better way to assert lock held, and it works for UP. Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-01md: remove special meaning of ->quiesce(.., 2)NeilBrown1-24/+10
The '2' argument means "wake up anything that is waiting". This is an inelegant part of the design and was added to help support management of suspend_lo/suspend_hi setting. Now that suspend_lo/hi is managed in mddev_suspend/resume, that need is gone. These is still a couple of places where we call 'quiesce' with an argument of '2', but they can safely be changed to call ->quiesce(.., 1); ->quiesce(.., 0) which achieve the same result at the small cost of pausing IO briefly. This removes a small "optimization" from suspend_{hi,lo}_store, but it isn't clear that optimization served a useful purpose. The code now is a lot clearer. Suggested-by: Shaohua Li <shli@kernel.org> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-01md: allow metadata update while suspending.NeilBrown1-0/+14
There are various deadlocks that can occur when a thread holds reconfig_mutex and calls ->quiesce(mddev, 1). As some write request block waiting for metadata to be updated (e.g. to record device failure), and as the md thread updates the metadata while the reconfig mutex is held, holding the mutex can stop write requests completing, and this prevents ->quiesce(mddev, 1) from completing. ->quiesce() is now usually called from mddev_suspend(), and it is always called with reconfig_mutex held. So at this time it is safe for the thread to update metadata without explicitly taking the lock. So add 2 new flags, one which says the unlocked updates is allowed, and one which ways it is happening. Then allow it while the quiesce completes, and then wait for it to finish. Reported-and-tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-01md: use mddev_suspend/resume instead of ->quiesce()NeilBrown1-12/+12
mddev_suspend() is a more general interface than calling ->quiesce() and is so more extensible. A future patch will make use of this. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-01md: move suspend_hi/lo handling into core md codeNeilBrown1-6/+23
responding to ->suspend_lo and ->suspend_hi is similar to responding to ->suspended. It is best to wait in the common core code without incrementing ->active_io. This allows mddev_suspend()/mddev_resume() to work while requests are waiting for suspend_lo/hi to change. This is will be important after a subsequent patch which uses mddev_suspend() to synchronize updating for suspend_lo/hi. So move the code for testing suspend_lo/hi out of raid1.c and raid5.c, and place it in md.c Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-01md: don't call bitmap_create() while array is quiesced.NeilBrown1-6/+10
bitmap_create() allocates memory with GFP_KERNEL and so can wait for IO. If called while the array is quiesced, it could wait indefinitely for write out to the array - deadlock. So call bitmap_create() before quiescing the array. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-01md: always hold reconfig_mutex when calling mddev_suspend()NeilBrown1-0/+3
Most often mddev_suspend() is called with reconfig_mutex held. Make this a requirement in preparation a subsequent patch. Also require reconfig_mutex to be held for mddev_resume(), partly for symmetry and partly to guarantee no races with incr/decr of mddev->suspend. Taking the mutex in r5c_disable_writeback_async() is a little tricky as this is called from a work queue via log->disable_writeback_work, and flush_work() is called on that while holding ->reconfig_mutex. If the work item hasn't run before flush_work() is called, the work function will not be able to get the mutex. So we use mddev_trylock() inside the wait_event() call, and have that abort when conf->log is set to NULL, which happens before flush_work() is called. We wait in mddev->sb_wait and ensure this is woken when any of the conditions change. This requires waking mddev->sb_wait in mddev_unlock(). This is only like to trigger extra wake_ups of threads that needn't be woken when metadata is being written, and that doesn't happen often enough that the cost would be noticeable. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-11-01md: forbid a RAID5 from having both a bitmap and a journal.NeilBrown1-1/+1
Having both a bitmap and a journal is pointless. Attempting to do so can corrupt the bitmap if the journal replay happens before the bitmap is initialized. Rather than try to avoid this corruption, simply refuse to allow arrays with both a bitmap and a journal. So: - if raid5_run sees both are present, fail. - if adding a bitmap finds a journal is present, fail - if adding a journal finds a bitmap is present, fail. Cc: stable@vger.kernel.org (4.10+) Signed-off-by: NeilBrown <neilb@suse.com> Tested-by: Joshua Kinard <kumba@gentoo.org> Acked-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-31treewide: Fix function prototypes for module_param_call()Kees Cook1-3/+3
Several function prototypes for the set/get functions defined by module_param_call() have a slightly wrong argument types. This fixes those in an effort to clean up the calls when running under type-enforced compiler instrumentation for CFI. This is the result of running the following semantic patch: @match_module_param_call_function@ declarer name module_param_call; identifier _name, _set_func, _get_func; expression _arg, _mode; @@ module_param_call(_name, _set_func, _get_func, _arg, _mode); @fix_set_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._set_func; identifier _val, _param; type _val_type, _param_type; @@ int _set_func( -_val_type _val +const char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } @fix_get_prototype depends on match_module_param_call_function@ identifier match_module_param_call_function._get_func; identifier _val, _param; type _val_type, _param_type; @@ int _get_func( -_val_type _val +char * _val , -_param_type _param +const struct kernel_param * _param ) { ... } Two additional by-hand changes are included for places where the above Coccinelle script didn't notice them: drivers/platform/x86/thinkpad_acpi.c fs/lockd/svc.c Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()Mark Rutland1-1/+1
Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-16md: rename some drivers/md/ files to have an "md-" prefixMike Snitzer1-1/+1
Motivated by the desire to illiminate the imprecise nature of DM-specific patches being unnecessarily sent to both the MD maintainer and mailing-list. Which is born out of the fact that DM files also reside in drivers/md/ Now all MD-specific files in drivers/md/ start with either "raid" or "md-" and the MAINTAINERS file has been updated accordingly. Shaohua: don't change module name Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-08md: always set THREAD_WAKEUP and wake up wqueue if thread existedGuoqing Jiang1-2/+2
Since commit 4ad23a976413 ("MD: use per-cpu counter for writes_pending"), the wait_queue is only got invoked if THREAD_WAKEUP is not set previously. With above change, I can see process_metadata_update could always hang on the wait queue, because mddev->thread could stay on 'D' status and the THREAD_WAKEUP flag is not cleared since there are lots of place to wake up mddev->thread. Then deadlock happened as follows: linux175:~ # ps aux|grep md|grep D root 20117 0.0 0.0 0 0 ? D 03:45 0:00 [md0_raid1] root 20125 0.0 0.0 0 0 ? D 03:45 0:00 [md0_cluster_rec] linux175:~ # cat /proc/20117/stack [<ffffffffa0635604>] dlm_lock_sync+0x94/0xd0 [md_cluster] [<ffffffffa0635674>] lock_token+0x34/0xd0 [md_cluster] [<ffffffffa0635804>] metadata_update_start+0x64/0x110 [md_cluster] [<ffffffffa04d985b>] md_update_sb.part.58+0x9b/0x860 [md_mod] [<ffffffffa04da035>] md_update_sb+0x15/0x30 [md_mod] [<ffffffffa04dc066>] md_check_recovery+0x266/0x490 [md_mod] [<ffffffffa06450e2>] raid1d+0x42/0x810 [raid1] [<ffffffffa04d2252>] md_thread+0x122/0x150 [md_mod] [<ffffffff81091741>] kthread+0x101/0x140 linux175:~ # cat /proc/20125/stack [<ffffffffa0636679>] recv_daemon+0x3f9/0x5c0 [md_cluster] [<ffffffffa04d2252>] md_thread+0x122/0x150 [md_mod] [<ffffffff81091741>] kthread+0x101/0x140 So let's revert the part of code in the commit to resovle the problem since we can't get lots of benefits of previous change. Fixes: 4ad23a976413 ("MD: use per-cpu counter for writes_pending") Signed-off-by: Guoqing Jiang <gqjiang@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-10-05md: fix deadlock error in recent patch.NeilBrown1-1/+2
A recent patch aimed to cause md_write_start() to fail (rather than block) when the mddev was suspending, so as to avoid deadlocks. Unfortunately the test in wait_event() was wrong, and it didn't change behaviour at all. We wait_event() must wait until the metadata is written OR the array is suspending. Fixes: cc27b0c78c79 ("md: fix deadlock between mddev_suspend() and md_write_start()") Cc: stable@vger.kernel.org Reported-by: Xiao Ni <xni@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
2017-09-27md: fix a race condition for flush request handlingShaohua Li1-4/+10
md_submit_flush_data calls pers->make_request, which missed the suspend check. Fix it with the new md_handle_request API. Reported-by: Nate Dailey <nate.dailey@stratus.com> Tested-by: Nate Dailey <nate.dailey@stratus.com> Fix: cc27b0c78c79(md: fix deadlock between mddev_suspend() and md_write_start()) Cc: stable@vger.kernel.org Reviewed-by: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.