aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/md/md.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2022-10-07Merge tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linuxLinus Torvalds1-3/+2
Pull block updates from Jens Axboe: - NVMe pull requests via Christoph: - handle number of queue changes in the TCP and RDMA drivers (Daniel Wagner) - allow changing the number of queues in nvmet (Daniel Wagner) - also consider host_iface when checking ip options (Daniel Wagner) - don't map pages which can't come from HIGHMEM (Fabio M. De Francesco) - avoid unnecessary flush bios in nvmet (Guixin Liu) - shrink and better pack the nvme_iod structure (Keith Busch) - add comment for unaligned "fake" nqn (Linjun Bao) - print actual source IP address through sysfs "address" attr (Martin Belanger) - various cleanups (Jackie Liu, Wolfram Sang, Genjian Zhang) - handle effects after freeing the request (Keith Busch) - copy firmware_rev on each init (Keith Busch) - restrict management ioctls to admin (Keith Busch) - ensure subsystem reset is single threaded (Keith Busch) - report the actual number of tagset maps in nvme-pci (Keith Busch) - small fabrics authentication fixups (Christoph Hellwig) - add common code for tagset allocation and freeing (Christoph Hellwig) - stop using the request_queue in nvmet (Christoph Hellwig) - set min_align_mask before calculating max_hw_sectors (Rishabh Bhatnagar) - send a rediscover uevent when a persistent discovery controller reconnects (Sagi Grimberg) - misc nvmet-tcp fixes (Varun Prakash, zhenwei pi) - MD pull request via Song: - Various raid5 fix and clean up, by Logan Gunthorpe and David Sloan. - Raid10 performance optimization, by Yu Kuai. - sbitmap wakeup hang fixes (Hugh, Keith, Jan, Yu) - IO scheduler switching quisce fix (Keith) - s390/dasd block driver updates (Stefan) - support for recovery for the ublk driver (ZiyangZhang) - rnbd drivers fixes and updates (Guoqing, Santosh, ye, Christoph) - blk-mq and null_blk map fixes (Bart) - various bcache fixes (Coly, Jilin, Jules) - nbd signal hang fix (Shigeru) - block writeback throttling fix (Yu) - optimize the passthrough mapping handling (me) - prepare block cgroups to being gendisk based (Christoph) - get rid of an old PSI hack in the block layer, moving it to the callers instead where it belongs (Christoph) - blk-throttle fixes and cleanups (Yu) - misc fixes and cleanups (Liu Shixin, Liu Song, Miaohe, Pankaj, Ping-Xiang, Wolfram, Saurabh, Li Jinlin, Li Lei, Lin, Li zeming, Miaohe, Bart, Coly, Gaosheng * tag 'for-6.1/block-2022-10-03' of git://git.kernel.dk/linux: (162 commits) sbitmap: fix lockup while swapping block: add rationale for not using blk_mq_plug() when applicable block: adapt blk_mq_plug() to not plug for writes that require a zone lock s390/dasd: use blk_mq_alloc_disk blk-cgroup: don't update the blkg lookup hint in blkg_conf_prep nvmet: don't look at the request_queue in nvmet_bdev_set_limits nvmet: don't look at the request_queue in nvmet_bdev_zone_mgmt_emulate_all blk-mq: use quiesced elevator switch when reinitializing queues block: replace blk_queue_nowait with bdev_nowait nvme: remove nvme_ctrl_init_connect_q nvme-loop: use the tagset alloc/free helpers nvme-loop: store the generic nvme_ctrl in set->driver_data nvme-loop: initialize sqsize later nvme-fc: use the tagset alloc/free helpers nvme-fc: store the generic nvme_ctrl in set->driver_data nvme-fc: keep ctrl->sqsize in sync with opts->queue_size nvme-rdma: use the tagset alloc/free helpers nvme-rdma: store the generic nvme_ctrl in set->driver_data nvme-tcp: use the tagset alloc/free helpers nvme-tcp: store the generic nvme_ctrl in set->driver_data ...
2022-09-27block: replace blk_queue_nowait with bdev_nowaitChristoph Hellwig1-2/+2
Replace blk_queue_nowait with a bdev_nowait helpers that takes the block_device given that the I/O submission path should not have to look into the request_queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Pankaj Raghav <p.raghav@samsung.com> Link: https://lore.kernel.org/r/20220927075815.269694-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-09-22md: Remove extra mddev_get() in md_seq_start()Logan Gunthorpe1-1/+0
A regression is seen where mddev devices stay permanently after they are stopped due to an elevated reference count. This was tracked down to an extra mddev_get() in md_seq_start(). It only happened rarely because most of the time the md_seq_start() is called with a zero offset. The path with an extra mddev_get() only happens when it starts with a non-zero offset. The commit noted below changed an mddev_get() to check its success but inadvertently left the original call in. Remove the extra call. Fixes: 12a6caf27324 ("md: only delete entries from all_mddevs when the disk is freed") Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Guoqing Jiang <Guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org>
2022-08-24md: call __md_stop_writes in md_stopGuoqing Jiang1-0/+1
From the link [1], we can see raid1d was running even after the path raid_dtr -> md_stop -> __md_stop. Let's stop write first in destructor to align with normal md-raid to fix the KASAN issue. [1]. https://lore.kernel.org/linux-raid/CAPhsuW5gc4AakdGNdF8ubpezAuDLFOYUO_sfMZcec6hQFm8nhg@mail.gmail.com/T/#m7f12bf90481c02c6d2da68c64aeed4779b7df74a Fixes: 48df498daf62 ("md: move bitmap_destroy to the beginning of __md_stop") Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org>
2022-08-24Revert "md-raid: destroy the bitmap after destroying the thread"Guoqing Jiang1-1/+1
This reverts commit e151db8ecfb019b7da31d076130a794574c89f6f. Because it obviously breaks clustered raid as noticed by Neil though it fixed KASAN issue for dm-raid, let's revert it and fix KASAN issue in next commit. [1]. https://lore.kernel.org/linux-raid/a6657e08-b6a7-358b-2d2a-0ac37d49d23a@linux.dev/T/#m95ac225cab7409f66c295772483d091084a6d470 Fixes: e151db8ecfb0 ("md-raid: destroy the bitmap after destroying the thread") Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org>
2022-08-24md: Flush workqueue md_rdev_misc_wq in md_alloc()David Sloan1-0/+1
A race condition still exists when removing and re-creating md devices in test cases. However, it is only seen on some setups. The race condition was tracked down to a reference still being held to the kobject by the rdev in the md_rdev_misc_wq which will be released in rdev_delayed_delete(). md_alloc() waits for previous deletions by waiting on the md_misc_wq, but the md_rdev_misc_wq may still be holding a reference to a recently removed device. To fix this, also flush the md_rdev_misc_wq in md_alloc(). Signed-off-by: David Sloan <david.sloan@eideticom.com> [logang@deltatee.com: rewrote commit message] Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-08-02block: change the blk_queue_split calling conventionChristoph Hellwig1-1/+1
The double indirect bio leads to somewhat suboptimal code generation. Instead return the (original or split) bio, and make sure the request_queue arguments to the lower level helpers is passed after the bio to avoid constant reshuffling of the argument passing registers. Also give it and the helpers used to implement it more descriptive names. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220727162300.3089193-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md-raid: destroy the bitmap after destroying the threadMikulas Patocka1-1/+1
When we ran the lvm test "shell/integrity-blocksize-3.sh" on a kernel with kasan, we got failure in write_page. The reason for the failure is that md_bitmap_destroy is called before destroying the thread and the thread may be waiting in the function write_page for the bio to complete. When the thread finishes waiting, it executes "if (test_bit(BITMAP_WRITE_ERROR, &bitmap->flags))", which triggers the kasan warning. Note that the commit 48df498daf62 that caused this bug claims that it is neede for md-cluster, you should check md-cluster and possibly find another bugfix for it. BUG: KASAN: use-after-free in write_page+0x18d/0x680 [md_mod] Read of size 8 at addr ffff889162030c78 by task mdX_raid1/5539 CPU: 10 PID: 5539 Comm: mdX_raid1 Not tainted 5.19.0-rc2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x34/0x44 print_report.cold+0x45/0x57a ? __lock_text_start+0x18/0x18 ? write_page+0x18d/0x680 [md_mod] kasan_report+0xa8/0xe0 ? write_page+0x18d/0x680 [md_mod] kasan_check_range+0x13f/0x180 write_page+0x18d/0x680 [md_mod] ? super_sync+0x4d5/0x560 [dm_raid] ? md_bitmap_file_kick+0xa0/0xa0 [md_mod] ? rs_set_dev_and_array_sectors+0x2e0/0x2e0 [dm_raid] ? mutex_trylock+0x120/0x120 ? preempt_count_add+0x6b/0xc0 ? preempt_count_sub+0xf/0xc0 md_update_sb+0x707/0xe40 [md_mod] md_reap_sync_thread+0x1b2/0x4a0 [md_mod] md_check_recovery+0x533/0x960 [md_mod] raid1d+0xc8/0x2a20 [raid1] ? var_wake_function+0xe0/0xe0 ? psi_group_change+0x411/0x500 ? preempt_count_sub+0xf/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? raid1_end_read_request+0x2a0/0x2a0 [raid1] ? preempt_count_sub+0xf/0xc0 ? _raw_spin_unlock_irqrestore+0x19/0x40 ? del_timer_sync+0xa9/0x100 ? try_to_del_timer_sync+0xc0/0xc0 ? _raw_spin_lock_irqsave+0x78/0xc0 ? __lock_text_start+0x18/0x18 ? __list_del_entry_valid+0x68/0xa0 ? finish_wait+0xa3/0x100 md_thread+0x161/0x260 [md_mod] ? unregister_md_personality+0xa0/0xa0 [md_mod] ? _raw_spin_lock_irqsave+0x78/0xc0 ? prepare_to_wait_event+0x2c0/0x2c0 ? unregister_md_personality+0xa0/0xa0 [md_mod] kthread+0x148/0x180 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 5522: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x80/0xa0 md_bitmap_create+0xa8/0xe80 [md_mod] md_run+0x777/0x1300 [md_mod] raid_ctr+0x249c/0x4a30 [dm_raid] dm_table_add_target+0x2b0/0x620 [dm_mod] table_load+0x1c8/0x400 [dm_mod] ctl_ioctl+0x29e/0x560 [dm_mod] dm_compat_ctl_ioctl+0x7/0x20 [dm_mod] __do_compat_sys_ioctl+0xfa/0x160 do_syscall_64+0x90/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 5680: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x40 kasan_set_free_info+0x20/0x40 __kasan_slab_free+0xf7/0x140 kfree+0x80/0x240 md_bitmap_free+0x1c3/0x280 [md_mod] __md_stop+0x21/0x120 [md_mod] md_stop+0x9/0x40 [md_mod] raid_dtr+0x1b/0x40 [dm_raid] dm_table_destroy+0x98/0x1e0 [dm_mod] __dm_destroy+0x199/0x360 [dm_mod] dev_remove+0x10c/0x160 [dm_mod] ctl_ioctl+0x29e/0x560 [dm_mod] dm_compat_ctl_ioctl+0x7/0x20 [dm_mod] __do_compat_sys_ioctl+0xfa/0x160 do_syscall_64+0x90/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Fixes: 48df498daf62 ("md: move bitmap_destroy to the beginning of __md_stop") Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: return the allocated devices from md_allocChristoph Hellwig1-32/+22
Two callers of md_alloc want to use the newly allocated devices, so return it instead of letting them find it cumbersomely after the allocation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-and-tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: open code md_probe in autorun_devicesChristoph Hellwig1-1/+1
autorun_devices should not be limited to the controls for the legacy probe on open, so just call md_alloc directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-and-tested-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: remove unneeded semicolonYang Li1-1/+1
Eliminate the following coccicheck warning: ./drivers/md/md.c:8208:2-3: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: fix build failure for !MODULEStephen Rothwell1-0/+2
After merging the block tree, today's linux-next build (x86_64 allmodconfig) failed like this: drivers/md/md.c:717:22: error: 'mddev_find' defined but not used [-Werror=unused-function] 717 | static struct mddev *mddev_find(dev_t unit) | ^~~~~~~~~~ cc1: all warnings being treated as errors Caused by commit 4500d5c17910 ("md: simplify md_open") Make mddev_find() available only for non-modular builds. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220721131132.070be166@canb.auug.org.au Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: simplify md_openChristoph Hellwig1-27/+15
Now that devices are on the all_mddevs list until the gendisk is freed, there can't be any duplicates. Remove the global list lookup and just grab a reference. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: only delete entries from all_mddevs when the disk is freedChristoph Hellwig1-18/+38
This ensures device names don't get prematurely reused. Instead add a deleted flag to skip already deleted devices in mddev_get and other places that only want to see live mddevs. Reported-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: stop using for_each_mddev in md_exitChristoph Hellwig1-28/+11
Just do a simple list_for_each_entry_safe on all_mddevs, and only grab a reference when we drop the lock and delete the now unused for_each_mddev macro. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: stop using for_each_mddev in md_notify_rebootChristoph Hellwig1-3/+9
Just do a simple list_for_each_entry_safe on all_mddevs, and only grab a reference when we drop the lock. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: stop using for_each_mddev in md_do_syncChristoph Hellwig1-3/+5
Just do a plain list_for_each that only grabs a mddev reference in the case where the thread sleeps and restarts the list iteration. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: factor out the rdev overlaps check from rdev_size_storeChristoph Hellwig1-45/+39
This splits the code into nicely readable chunks and also avoids the refcount inc/dec manipulations. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: rename md_free to md_kobj_releaseChristoph Hellwig1-2/+2
The md_free name is rather misleading, so pick a better one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: implement ->free_diskChristoph Hellwig1-6/+12
Ensure that all private data is only freed once all accesses are done. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: fix error handling in md_allocChristoph Hellwig1-13/+32
Error handling in md_alloc is a mess. Untangle it to just free the mddev directly before add_disk is called and thus the gendisk is globally visible. After that clear the hold flag and let the mddev_put take care of cleaning up the mddev through the usual mechanisms. Fixes: 5e55e2f5fc95 ("[PATCH] md: convert compile time warnings into runtime warnings") Fixes: 9be68dd7ac0e ("md: add error handling support for add_disk()") Fixes: 7ad1069166c0 ("md: properly unwind when failing to add the kobject in md_alloc") Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: fix mddev->kobj lifetimeChristoph Hellwig1-6/+4
Once a kobject is initialized, the containing object should not be directly freed. So delay initialization until it is added. Also remove the kobject_del call as the last put will remove the kobject as well. The explicitly delete isn't needed here, and dropping it will simplify further fixes. With this md_free now does not need to check that ->gendisk is non-NULL as it is always set by the time that kobject_init is called on mddev->kobj. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: unlock mddev before reap sync_thread in action_storeGuoqing Jiang1-2/+17
Since the bug which commit 8b48ec23cc51a ("md: don't unregister sync_thread with reconfig_mutex held") fixed is related with action_store path, other callers which reap sync_thread didn't need to be changed. Let's pull md_unregister_thread from md_reap_sync_thread, then fix previous bug with belows. 1. unlock mddev before md_reap_sync_thread in action_store. 2. save reshape_position before unlock, then restore it to ensure position not changed accidentally by others. Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: Explicitly create command-line configured devicesChris Webb1-1/+1
Boot-time assembly of arrays with md= command-line arguments breaks when CONFIG_BLOCK_LEGACY_AUTOLOAD is unset. md_setup_drive() in md-autodetect.c calls blkdev_get_by_dev(), assuming this implicitly creates the block device. Fix this by attempting to md_alloc() the array first. As in the probe path, ignore any error as failure is caught by blkdev_get_by_dev() anyway. Signed-off-by: Chris Webb <chris@arachsys.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: Notify sysfs sync_completed in md_reap_sync_thread()Logan Gunthorpe1-0/+1
The mdadm test 07layouts randomly produces a kernel hung task deadlock. The deadlock is caused by the suspend_lo/suspend_hi files being set by the mdadm background process during reshape and not being cleared because the process hangs. (Leaving aside the issue of the fragility of freezing kernel tasks by buggy userspace processes...) When the background mdadm process hangs it, is waiting (without a timeout) on a change to the sync_completed file signalling that the reshape has completed. The process is woken up a couple times when the reshape finishes but it is woken up before MD_RECOVERY_RUNNING is cleared so sync_completed_show() reports 0 instead of "none". To fix this, notify the sysfs file in md_reap_sync_thread() after MD_RECOVERY_RUNNING has been cleared. This wakes up mdadm and causes it to continue and write to suspend_lo/suspend_hi to allow IO to continue. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: Ensure resync is reported after it startsLogan Gunthorpe1-2/+12
The 07layouts test in mdadm fails on some systems. The failure presents itself as the backup file not being removed before the next layout is grown into: mdadm: /dev/md0: cannot create backup file /tmp/md-test-backup: File exists This is because the background mdadm process, which is responsible for cleaning up this backup file gets into an infinite loop waiting for the reshape to start. mdadm checks the mdstat file if a reshape is going and, if it is not, it waits for an event on the file or times out in 5 seconds. On faster machines, the reshape may complete before the 5 seconds times out, and thus the background mdadm process loops waiting for a reshape to start that has already occurred. mdadm reads the mdstat file to start, but mdstat does not report that the reshape has begun, even though it has indeed begun. So the mdstat_wait() call (in mdadm) which polls on the mdstat file won't ever return until timing out. The reason mdstat reports the reshape has started is due to an issue in status_resync(). recovery_active is subtracted from curr_resync which will result in a value of zero for the first chunk of reshaped data, and the resulting read will report no reshape in progress. To fix this, if "resync - recovery_active" is an overloaded value, force the value to be MD_RESYNC_ACTIVE so the code reports a resync in progress. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-02md: Use enum for overloaded magic numbers used by mddev->curr_resyncLogan Gunthorpe1-22/+18
Comments in the code document special values used for mddev->curr_resync. Make this clearer by using an enum to label these values. The only functional change is a couple places use the wrong comparison operator that implied 3 is another special value. They are all fixed to imply that 3 or greater is an active resync. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14md/core: Combine two sync_page_io() argumentsBart Van Assche1-5/+5
Improve uniformity in the kernel of handling of request operation and flags by passing these as a single argument. Cc: Song Liu <song@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20220714180729.1065367-32-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-14block: remove bdevnameChristoph Hellwig1-1/+1
Replace the remaining calls of bdevname with snprintf using the %pg format specifier. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220713055317.1888500-10-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-28block: remove blk_cleanup_diskChristoph Hellwig1-2/+2
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-06-15Revert "md: don't unregister sync_thread with reconfig_mutex held"Guoqing Jiang1-9/+5
The 07reshape5intr test is broke because of below path. md_reap_sync_thread -> mddev_unlock -> md_unregister_thread(&mddev->sync_thread) And md_check_recovery is triggered by, mddev_unlock -> md_wakeup_thread(mddev->thread) then mddev->reshape_position is set to MaxSector in raid5_finish_reshape since MD_RECOVERY_INTR is cleared in md_check_recovery, which means feature_map is not set with MD_FEATURE_RESHAPE_ACTIVE and superblock's reshape_position can't be updated accordingly. Fixes: 8b48ec23cc51a ("md: don't unregister sync_thread with reconfig_mutex held") Reported-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org>
2022-05-22md: fix double free of io_acct_set biosetXiao Ni1-4/+0
Now io_acct_set is alloc and free in personality. Remove the codes that free io_acct_set in md_free and md_stop. Fixes: 0c031fd37f69 (md: Move alloc/free acct bioset in to personality) Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <song@kernel.org>
2022-05-22md: remove most calls to bdevnameChristoph Hellwig1-87/+65
Use the %pg format specifier to save on stack consumption and code size. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
2022-05-22md: protect md_unregister_thread from reentrancyGuoqing Jiang1-5/+10
Generally, the md_unregister_thread is called with reconfig_mutex, but raid_message in dm-raid doesn't hold reconfig_mutex to unregister thread, so md_unregister_thread can be called simulitaneously from two call sites in theory. Then after previous commit which remove the protection of reconfig_mutex for md_unregister_thread completely, the potential issue could be worse than before. Let's take pers_lock at the beginning of function to ensure reentrancy. Reported-by: Donald Buczek <buczek@molgen.mpg.de> Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Song Liu <song@kernel.org>
2022-05-22md: don't unregister sync_thread with reconfig_mutex heldGuoqing Jiang1-5/+9
Unregister sync_thread doesn't need to hold reconfig_mutex since it doesn't reconfigure array. And it could cause deadlock problem for raid5 as follows: 1. process A tried to reap sync thread with reconfig_mutex held after echo idle to sync_action. 2. raid5 sync thread was blocked if there were too many active stripes. 3. SB_CHANGE_PENDING was set (because of write IO comes from upper layer) which causes the number of active stripes can't be decreased. 4. SB_CHANGE_PENDING can't be cleared since md_check_recovery was not able to hold reconfig_mutex. More details in the link: https://lore.kernel.org/linux-raid/5ed54ffc-ce82-bf66-4eff-390cb23bc1ac@molgen.mpg.de/T/#t And add one parameter to md_reap_sync_thread since it could be called by dm-raid which doesn't hold reconfig_mutex. Reported-and-tested-by: Donald Buczek <buczek@molgen.mpg.de> Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <song@kernel.org>
2022-04-25md: Replace role magic numbers with defined constantsDavid Sloan1-5/+6
There are several instances where magic numbers are used in md.c instead of the defined constants in md_p.h. This patch set improves code readability by replacing all occurrences of 0xffff, 0xfffe, and 0xfffd when relating to md roles with their equivalent defined constant. Signed-off-by: David Sloan <david.sloan@eideticom.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org>
2022-04-25md: replace deprecated strlcpy & remove duplicated lineHeming Zhao1-3/+3
This commit includes two topics: 1> replace deprecated strlcpy change strlcpy to strscpy for strlcpy is marked as deprecated in Documentation/process/deprecated.rst 2> remove duplicated strlcpy line in md_bitmap_read_sb@md-bitmap.c there are two duplicated strlcpy(), the history: - commit cf921cc19cf7 ("Add node recovery callbacks") introduced the first usage of strlcpy(). - commit b97e92574c0b ("Use separate bitmaps for each nodes in the cluster") introduced the second strlcpy(). this time, the two strlcpy() are same, we can remove anyone safely. - commit d3b178adb3a3 ("md: Skip cluster setup for dm-raid") added dm-raid special handling. And the "nodes" value is the key of this patch. but from this patch, strlcpy() which was introduced by b97e92574c0bf become necessary. - commit 3c462c880b52 ("md: Increment version for clustered bitmaps") used clustered major version to only handle in clustered env. this patch could look a polishment for clustered code logic. So cf921cc19cf7 became useless after d3b178adb3a3a, we could remove it safely. Signed-off-by: Heming Zhao <heming.zhao@suse.com> Signed-off-by: Song Liu <song@kernel.org>
2022-04-25md: fix an incorrect NULL check in md_reload_sbXiaomeng Tong1-4/+6
The bug is here: if (!rdev || rdev->desc_nr != nr) { The list iterator value 'rdev' will *always* be set and non-NULL by rdev_for_each_rcu(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element found (In fact, it will be a bogus pointer to an invalid struct object containing the HEAD). Otherwise it will bypass the check and lead to invalid memory access passing the check. To fix the bug, use a new variable 'iter' as the list iterator, while using the original variable 'pdev' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: 70bcecdb1534 ("md-cluster: Improve md_reload_sb to be less error prone") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Signed-off-by: Song Liu <song@kernel.org>
2022-04-25md: fix an incorrect NULL check in does_sb_need_changingXiaomeng Tong1-3/+5
The bug is here: if (!rdev) The list iterator value 'rdev' will *always* be set and non-NULL by rdev_for_each(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element found. Otherwise it will bypass the NULL check and lead to invalid memory access passing the check. To fix the bug, use a new variable 'iter' as the list iterator, while using the original variable 'rdev' as a dedicated pointer to point to the found element. Cc: stable@vger.kernel.org Fixes: 2aa82191ac36 ("md-cluster: Perform a lazy update") Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev> Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Acked-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Song Liu <song@kernel.org>
2022-04-25md: Set MD_BROKEN for RAID1 and RAID10Mariusz Tkaczyk1-12/+15
There is no direct mechanism to determine raid failure outside personality. It is done by checking rdev->flags after executing md_error(). If "faulty" flag is not set then -EBUSY is returned to userspace. -EBUSY means that array will be failed after drive removal. Mdadm has special routine to handle the array failure and it is executed if -EBUSY is returned by md. There are at least two known reasons to not consider this mechanism as correct: 1. drive can be removed even if array will be failed[1]. 2. -EBUSY seems to be wrong status. Array is not busy, but removal process cannot proceed safe. -EBUSY expectation cannot be removed without breaking compatibility with userspace. In this patch first issue is resolved by adding support for MD_BROKEN flag for RAID1 and RAID10. Support for RAID456 is added in next commit. The idea is to set the MD_BROKEN if we are sure that raid is in failed state now. This is done in each error_handler(). In md_error() MD_BROKEN flag is checked. If is set, then -EBUSY is returned to userspace. As in previous commit, it causes that #mdadm --set-faulty is able to fail array. Previously proposed workaround is valid if optional functionality[1] is disabled. [1] commit 9a567843f7ce("md: allow last device to be forcibly removed from RAID1/RAID10.") Reviewd-by: Xiao Ni <xni@redhat.com> Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com> Signed-off-by: Song Liu <song@kernel.org>
2022-04-17block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARDChristoph Hellwig1-1/+1
Secure erase is a very different operation from discard in that it is a data integrity operation vs hint. Fully split the limits and helper infrastructure to make the separation more clear. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> [drbd] Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> [nifs2] Acked-by: Jaegeuk Kim <jaegeuk@kernel.org> [f2fs] Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: David Sterba <dsterba@suse.com> [btrfs] Acked-by: Chao Yu <chao@kernel.org> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-27-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-17block: add a bdev_nonrot helperChristoph Hellwig1-2/+1
Add a helper to check the nonrot flag based on the block_device instead of having to poke into the block layer internal request_queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220415045258.199825-12-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-03-21Merge tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull block driver updates from Jens Axboe: - NVMe updates via Christoph: - add vectored-io support for user-passthrough (Kanchan Joshi) - add verbose error logging (Alan Adamson) - support buffered I/O on block devices in nvmet (Chaitanya Kulkarni) - central discovery controller support (Martin Belanger) - fix and extended the globally unique idenfier validation (Christoph) - move away from the deprecated IDA APIs (Sagi Grimberg) - misc code cleanup (Keith Busch, Max Gurtovoy, Qinghua Jin, Chaitanya Kulkarni) - add lockdep annotations for in-kernel sockets (Chris Leech) - use vmalloc for ANA log buffer (Hannes Reinecke) - kerneldoc fixes (Chaitanya Kulkarni) - cleanups (Guoqing Jiang, Chaitanya Kulkarni, Christoph) - warn about shared namespaces without multipathing (Christoph) - MD updates via Song with a set of cleanups (Christoph, Mariusz, Paul, Erik, Dirk) - loop cleanups and queue depth configuration (Chaitanya) - null_blk cleanups and fixes (Chaitanya) - Use descriptive init/exit names in virtio_blk (Randy) - Use bvec_kmap_local() in drivers (Christoph) - bcache fixes (Mingzhe) - xen blk-front persistent grant speedups (Juergen) - rnbd fix and cleanup (Gioh) - Misc fixes (Christophe, Colin) * tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block: (76 commits) virtio_blk: eliminate anonymous module_init & module_exit nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH nvme: remove nvme_alloc_request and nvme_alloc_request_qid nvme: cleanup how disk->disk_name is assigned nvmet: move the call to nvmet_ns_changed out of nvmet_ns_revalidate nvmet: use snprintf() with PAGE_SIZE in configfs nvmet: don't fold lines nvmet-rdma: fix kernel-doc warning for nvmet_rdma_device_removal nvmet-fc: fix kernel-doc warning for nvmet_fc_unregister_targetport nvmet-fc: fix kernel-doc warning for nvmet_fc_register_targetport nvme-tcp: lockdep: annotate in-kernel sockets nvme-tcp: don't fold the line nvme-tcp: don't initialize ret variable nvme-multipath: call bio_io_error in nvme_ns_head_submit_bio nvme-multipath: use vmalloc for ANA log buffer xen/blkfront: speed up purge_persistent_grants() raid5: initialize the stripe_head embeeded bios as needed raid5-cache: statically allocate the recovery ra bio raid5-cache: fully initialize flush_bio when needed raid5-ppl: fully initialize the bio in ppl_new_iounit ...
2022-03-21Merge tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-blockLinus Torvalds1-15/+14
Pull block updates from Jens Axboe: - BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo) - blk-rq-qos completion fix (Tejun) - blk-cgroup merge fix (Tejun) - Add offline error return value to distinguish it from an IO error on the device (Song) - IO stats fixes (Zhang, Christoph) - blkcg refcount fixes (Ming, Yu) - Fix for indefinite dispatch loop softlockup (Shin'ichiro) - blk-mq hardware queue management improvements (Ming) - sbitmap dead code removal (Ming, John) - Plugging merge improvements (me) - Show blk-crypto capabilities in sysfs (Eric) - Multiple delayed queue run improvement (David) - Block throttling fixes (Ming) - Start deprecating auto module loading based on dev_t (Christoph) - bio allocation improvements (Christoph, Chaitanya) - Get rid of bio_devname (Christoph) - bio clone improvements (Christoph) - Block plugging improvements (Christoph) - Get rid of genhd.h header (Christoph) - Ensure drivers use appropriate flush helpers (Christoph) - Refcounting improvements (Christoph) - Queue initialization and teardown improvements (Ming, Christoph) - Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng, Lukas, Nian, Yang, Eric, Chengming) * tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits) block: cancel all throttled bios in del_gendisk() block: let blkcg_gq grab request queue's refcnt block: avoid use-after-free on throttle data block: limit request dispatch loop duration block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative" sr: simplify the local variable initialization in sr_block_open() block: don't merge across cgroup boundaries if blkcg is enabled block: fix rq-qos breakage from skipping rq_qos_done_bio() block: flush plug based on hardware and software queue order block: ensure plug merging checks the correct queue at least once block: move rq_qos_exit() into disk_release() block: do more work in elevator_exit block: move blk_exit_queue into disk_release block: move q_usage_counter release into blk_queue_release block: don't remove hctx debugfs dir from blk_mq_exit_queue block: move blkcg initialization/destroy into disk allocation/release handler sr: implement ->free_disk to simplify refcounting sd: implement ->free_disk to simplify refcounting sd: delay calling free_opal_dev sd: call sd_zbc_release_disk before releasing the scsi_device reference ...
2022-03-08md: use msleep() in md_notify_reboot()Eric Dumazet1-1/+1
Calling mdelay(1000) from process context, even while a reboot is in progress, does not make sense. Using msleep() allows other threads to make progress. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: linux-raid@vger.kernel.org Signed-off-by: Song Liu <song@kernel.org>
2022-02-04block: pass a block_device to bio_clone_fastChristoph Hellwig1-2/+3
Pass a block_device to bio_clone_fast and __bio_clone_fast and give the functions more suitable names. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220202160109.108149-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02md: fix NULL pointer deref with nowait but no mddev->queueSong Liu1-4/+4
Leon reported NULL pointer deref with nowait support: [ 15.123761] device-mapper: raid: Loading target version 1.15.1 [ 15.124185] device-mapper: raid: Ignoring chunk size parameter for RAID 1 [ 15.124192] device-mapper: raid: Choosing default region size of 4MiB [ 15.129524] BUG: kernel NULL pointer dereference, address: 0000000000000060 [ 15.129530] #PF: supervisor write access in kernel mode [ 15.129533] #PF: error_code(0x0002) - not-present page [ 15.129535] PGD 0 P4D 0 [ 15.129538] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 15.129541] CPU: 5 PID: 494 Comm: ldmtool Not tainted 5.17.0-rc2-1-mainline #1 9fe89d43dfcb215d2731e6f8851740520778615e [ 15.129546] Hardware name: Gigabyte Technology Co., Ltd. X570 AORUS ELITE/X570 AORUS ELITE, BIOS F36e 10/14/2021 [ 15.129549] RIP: 0010:blk_queue_flag_set+0x7/0x20 [ 15.129555] Code: 00 00 00 0f 1f 44 00 00 48 8b 35 e4 e0 04 02 48 8d 57 28 bf 40 01 \ 00 00 e9 16 c1 be ff 66 0f 1f 44 00 00 0f 1f 44 00 00 89 ff <f0> 48 0f ab 7e 60 \ 31 f6 89 f7 c3 66 66 2e 0f 1f 84 00 00 00 00 00 [ 15.129559] RSP: 0018:ffff966b81987a88 EFLAGS: 00010202 [ 15.129562] RAX: ffff8b11c363a0d0 RBX: ffff8b11e294b070 RCX: 0000000000000000 [ 15.129564] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000001d [ 15.129566] RBP: ffff8b11e294b058 R08: 0000000000000000 R09: 0000000000000000 [ 15.129568] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b11e294b070 [ 15.129570] R13: 0000000000000000 R14: ffff8b11e294b000 R15: 0000000000000001 [ 15.129572] FS: 00007fa96e826780(0000) GS:ffff8b18deb40000(0000) knlGS:0000000000000000 [ 15.129575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.129577] CR2: 0000000000000060 CR3: 000000010b8ce000 CR4: 00000000003506e0 [ 15.129580] Call Trace: [ 15.129582] <TASK> [ 15.129584] md_run+0x67c/0xc70 [md_mod 1e470c1b6bcf1114198109f42682f5a2740e9531] [ 15.129597] raid_ctr+0x134a/0x28ea [dm_raid 6a645dd7519e72834bd7e98c23497eeade14cd63] [ 15.129604] ? dm_split_args+0x63/0x150 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129615] dm_table_add_target+0x188/0x380 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129625] table_load+0x13b/0x370 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129635] ? dev_suspend+0x2d0/0x2d0 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129644] ctl_ioctl+0x1bd/0x460 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129655] dm_ctl_ioctl+0xa/0x20 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129663] __x64_sys_ioctl+0x8e/0xd0 [ 15.129667] do_syscall_64+0x5c/0x90 [ 15.129672] ? syscall_exit_to_user_mode+0x23/0x50 [ 15.129675] ? do_syscall_64+0x69/0x90 [ 15.129677] ? do_syscall_64+0x69/0x90 [ 15.129679] ? syscall_exit_to_user_mode+0x23/0x50 [ 15.129682] ? do_syscall_64+0x69/0x90 [ 15.129684] ? do_syscall_64+0x69/0x90 [ 15.129686] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 15.129689] RIP: 0033:0x7fa96ecd559b [ 15.129692] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c \ c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff \ ff 73 01 c3 48 8b 0d a5 a8 0c 00 f7 d8 64 89 01 48 [ 15.129696] RSP: 002b:00007ffcaf85c258 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 15.129699] RAX: ffffffffffffffda RBX: 00007fa96f1b48f0 RCX: 00007fa96ecd559b [ 15.129701] RDX: 00007fa97017e610 RSI: 00000000c138fd09 RDI: 0000000000000003 [ 15.129702] RBP: 00007fa96ebab583 R08: 00007fa97017c9e0 R09: 00007ffcaf85bf27 [ 15.129704] R10: 0000000000000001 R11: 0000000000000206 R12: 00007fa97017e610 [ 15.129706] R13: 00007fa97017e640 R14: 00007fa97017e6c0 R15: 00007fa97017e530 [ 15.129709] </TASK> This is caused by missing mddev->queue check for setting QUEUE_FLAG_NOWAIT Fix this by moving the QUEUE_FLAG_NOWAIT logic to under mddev->queue check. Fixes: f51d46d0e7cb ("md: add support for REQ_NOWAIT") Reported-by: Leon Möller <jkhsjdhjs@totally.rip> Tested-by: Leon Möller <jkhsjdhjs@totally.rip> Cc: Vishal Verma <vverma@digitalocean.com> Signed-off-by: Song Liu <song@kernel.org>
2022-02-02block: pass a block_device and opf to bio_initChristoph Hellwig1-5/+3
Pass the block_device that we plan to use this bio for and the operation to bio_init to optimize the assignment. A NULL block_device can be passed, both for the passthrough case on a raw request_queue and to temporarily avoid refactoring some nasty code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220124091107.642561-19-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-02-02block: pass a block_device and opf to bio_alloc_biosetChristoph Hellwig1-8/+8
Pass the block_device and operation that we plan to use this bio for to bio_alloc_bioset to optimize the assigment. NULL/0 can be passed, both for the passthrough case on a raw request_queue and to temporarily avoid refactoring some nasty code. Also move the gfp_mask argument after the nr_vecs argument for a much more logical calling convention matching what most of the kernel does. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220124091107.642561-16-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-01-12Merge tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-blockLinus Torvalds1-12/+41
Pull block driver updates from Jens Axboe: - mtip32xx pci cleanups (Bjorn) - mtip32xx conversion to generic power management (Vaibhav) - rsxx pci powermanagement cleanups (Bjorn) - Remove the rsxx driver. This hardware never saw much adoption, and it's been end of lifed for a while. (Christoph) - MD pull request from Song: - REQ_NOWAIT support (Vishal Verma) - raid6 benchmark optimization (Dirk Müller) - Fix for acct bioset (Xiao Ni) - Clean up max_queued_requests (Mariusz Tkaczyk) - PREEMPT_RT optimization (Davidlohr Bueso) - Use default_groups in kobj_type (Greg Kroah-Hartman) - Use attribute groups in pktcdvd and rnbd (Greg) - NVMe pull request from Christoph: - increment request genctr on completion (Keith Busch, Geliang Tang) - add a 'iopolicy' module parameter (Hannes Reinecke) - print out valid arguments when reading from /dev/nvme-fabrics (Hannes Reinecke) - Use struct_group() in drbd (Kees) - null_blk fixes (Ming) - Get rid of congestion logic in pktcdvd (Neil) - Floppy ejection hang fix (Tasos) - Floppy max user request size fix (Xiongwei) - Loop locking fix (Tetsuo) * tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-block: (32 commits) md: use default_groups in kobj_type md: Move alloc/free acct bioset in to personality lib/raid6: Use strict priority ranking for pq gen() benchmarking lib/raid6: skip benchmark of non-chosen xor_syndrome functions md: fix spelling of "its" md: raid456 add nowait support md: raid10 add nowait support md: raid1 add nowait support md: add support for REQ_NOWAIT md: drop queue limitation for RAID1 and RAID10 md/raid5: play nice with PREEMPT_RT block/rnbd-clt-sysfs: use default_groups in kobj_type pktcdvd: convert to use attribute groups block: null_blk: only set set->nr_maps as 3 if active poll_queues is > 0 nvme: add 'iopolicy' module parameter nvme: drop unused variable ctrl in nvme_setup_cmd nvme: increment request genctr on completion nvme-fabrics: print out valid arguments when reading from /dev/nvme-fabrics block: remove the rsxx driver rsxx: Drop PCI legacy power management ...
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.