aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/md/md.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-11-30md: fix a warning caused by a race between concurrent md_ioctl()sDae R. Jeong1-2/+5
Syzkaller reports a warning as belows. WARNING: CPU: 0 PID: 9647 at drivers/md/md.c:7169 ... Call Trace: ... RIP: 0010:md_ioctl+0x4017/0x5980 drivers/md/md.c:7169 RSP: 0018:ffff888096027950 EFLAGS: 00010293 RAX: ffff88809322c380 RBX: 0000000000000932 RCX: ffffffff84e266f2 RDX: 0000000000000000 RSI: ffffffff84e299f7 RDI: 0000000000000007 RBP: ffff888096027bc0 R08: ffff88809322c380 R09: ffffed101341a482 R10: ffff888096027940 R11: ffff88809a0d240f R12: 0000000000000932 R13: ffff8880a2c14100 R14: ffff88809a0d2268 R15: ffff88809a0d2408 __blkdev_driver_ioctl block/ioctl.c:304 [inline] blkdev_ioctl+0xece/0x1c10 block/ioctl.c:606 block_ioctl+0xee/0x130 fs/block_dev.c:1930 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd5f/0x1380 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe This is caused by a race between two concurrenct md_ioctl()s closing the array. CPU1 (md_ioctl()) CPU2 (md_ioctl()) ------ ------ set_bit(MD_CLOSING, &mddev->flags); did_set_md_closing = true; WARN_ON_ONCE(test_bit(MD_CLOSING, &mddev->flags)); if(did_set_md_closing) clear_bit(MD_CLOSING, &mddev->flags); Fix the warning by returning immediately if the MD_CLOSING bit is set in &mddev->flags which indicates that the array is being closed. Fixes: 065e519e71b2 ("md: MD_CLOSING needs to be cleared after called md_set_readonly or do_md_stop") Reported-by: syzbot+1e46a0864c1a6e9bd3d8@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Dae R. Jeong <dae.r.jeong@kaist.ac.kr> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-11-16md: use set_capacity_and_notifyChristoph Hellwig1-14/+10
Use set_capacity_and_notify to set the size of both the disk and block device. This also gets the uevent notifications for the resize for free. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16md: use __register_blkdev to allocate devices on demandChristoph Hellwig1-13/+8
Use the simpler mechanism attached to major_name to allocate a md device when a currently unregistered minor is accessed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16md: implement ->set_read_only to hook into BLKROSET processingChristoph Hellwig1-31/+31
Implement the ->set_read_only method instead of parsing the actual ioctl command. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-13Merge tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+21
Pull block driver updates from Jens Axboe: "Here are the driver updates for 5.10. A few SCSI updates in here too, in coordination with Martin as they depend on core block changes for the shared tag bitmap. This contains: - NVMe pull requests via Christoph: - fix keep alive timer modification (Amit Engel) - order the PCI ID list more sensibly (Andy Shevchenko) - cleanup the open by controller helper (Chaitanya Kulkarni) - use an xarray for the CSE log lookup (Chaitanya Kulkarni) - support ZNS in nvmet passthrough mode (Chaitanya Kulkarni) - fix nvme_ns_report_zones (Christoph Hellwig) - add a sanity check to nvmet-fc (James Smart) - fix interrupt allocation when too many polled queues are specified (Jeffle Xu) - small nvmet-tcp optimization (Mark Wunderlich) - fix a controller refcount leak on init failure (Chaitanya Kulkarni) - misc cleanups (Chaitanya Kulkarni) - major refactoring of the scanning code (Christoph Hellwig) - MD updates via Song: - Bug fixes in bitmap code, from Zhao Heming - Fix a work queue check, from Guoqing Jiang - Fix raid5 oops with reshape, from Song Liu - Clean up unused code, from Jason Yan - Discard improvements, from Xiao Ni - raid5/6 page offset support, from Yufen Yu - Shared tag bitmap for SCSI/hisi_sas/null_blk (John, Kashyap, Hannes) - null_blk open/active zone limit support (Niklas) - Set of bcache updates (Coly, Dongsheng, Qinglang)" * tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (78 commits) md/raid5: fix oops during stripe resizing md/bitmap: fix memory leak of temporary bitmap md: fix the checking of wrong work queue md/bitmap: md_bitmap_get_counter returns wrong blocks md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks md/raid0: remove unused function is_io_in_chunk_boundary() nvme-core: remove extra condition for vwc nvme-core: remove extra variable nvme: remove nvme_identify_ns_list nvme: refactor nvme_validate_ns nvme: move nvme_validate_ns nvme: query namespace identifiers before adding the namespace nvme: revalidate zone bitmaps in nvme_update_ns_info nvme: remove nvme_update_formats nvme: update the known admin effects nvme: set the queue limits in nvme_update_ns_info nvme: remove the 0 lba_shift check in nvme_update_ns_info nvme: clean up the check for too large logic block sizes nvme: freeze the queue over ->lba_shift updates nvme: factor out a nvme_configure_metadata helper ...
2020-10-08md: fix the checking of wrong work queueGuoqing Jiang1-1/+1
It should check md_rdev_misc_wq instead of md_misc_wq. Fixes: cc1ffe61c026 ("md: add new workqueue for delete rdev") Cc: <stable@vger.kernel.org> # v5.8+ Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-09-25md: don't detour through bd_contains for the gendiskChristoph Hellwig1-1/+1
bd_disk is set on all block devices, including those for partitions. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25md: compare bd_disk instead of bd_containsChristoph Hellwig1-4/+3
To check for partitions of the same disk bd_contains works as well, but bd_disk is way more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24md: add md_submit_discard_bio() for submitting discard bioXiao Ni1-0/+20
Move these logic from raid0.c to md.c, so that we can also use it in raid10.c. Reviewed-by: Coly Li <colyli@suse.de> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-09-11md: use part_[begin|end]_io_acct instead of disk_[begin|end]_io_acctSong Liu1-4/+4
This enables proper statistics in /proc/diskstats for md partitions. Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-10md: use bdev_check_media_changeChristoph Hellwig1-1/+1
The md driver does not have a ->revalidate_disk method, so it can just use bdev_check_media_change without any additional changes. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-02block: add a new revalidate_disk_size helperChristoph Hellwig1-5/+5
revalidate_disk is a relative awkward helper for driver use, as it first calls an optional driver method and then updates the block device size, while most callers either don't need the method call at all, or want to keep state between the caller and the called method. Add a revalidate_disk_size helper that just performs the update of the block device size from the gendisk one, and switch all drivers that do not implement ->revalidate_disk to use the new helper instead of revalidate_disk() Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-15Merge tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-blockLinus Torvalds1-7/+10
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create
2020-08-07Merge branch 'hch.init_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-27/+11
Pull init and set_fs() cleanups from Al Viro: "Christoph's 'getting rid of ksys_...() uses under KERNEL_DS' series" * 'hch.init_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (50 commits) init: add an init_dup helper init: add an init_utimes helper init: add an init_stat helper init: add an init_mknod helper init: add an init_mkdir helper init: add an init_symlink helper init: add an init_link helper init: add an init_eaccess helper init: add an init_chmod helper init: add an init_chown helper init: add an init_chroot helper init: add an init_chdir helper init: add an init_rmdir helper init: add an init_unlink helper init: add an init_umount helper init: add an init_mount helper init: mark create_dev as __init init: mark console_on_rootfs as __init init: initialize ramdisk_execute_command at compile time devtmpfs: refactor devtmpfsd() ...
2020-08-06Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-5.9Jens Axboe1-7/+10
Pull MD fixes from Song. * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md-cluster: Fix potential error pointer dereference in resize_bitmaps() md: get sysfs entry after redundancy attr group create
2020-08-05md: get sysfs entry after redundancy attr group createJunxiao Bi1-7/+10
"sync_completed" and "degraded" belongs to redundancy attr group, it was not exist yet when md device was created. Reported-by: kernel test robot <rong.a.chen@intel.com> Fixes: e1a86dbbbd6a ("md: fix deadlock causing by sysfs_notify") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-05Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-blockLinus Torvalds1-43/+138
Pull block driver updates from Jens Axboe: - NVMe: - ZNS support (Aravind, Keith, Matias, Niklas) - Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David, Dongli, Max, Sagi) - null_blk zone capacity support (Aravind) - MD: - raid5/6 fixes (ChangSyun) - Warning fixes (Damien) - raid5 stripe fixes (Guoqing, Song, Yufen) - sysfs deadlock fix (Junxiao) - raid10 deadlock fix (Vitaly) - struct_size conversions (Gustavo) - Set of bcache updates/fixes (Coly) * tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits) md/raid5: Allow degraded raid6 to do rmw md/raid5: Fix Force reconstruct-write io stuck in degraded raid5 raid5: don't duplicate code for different paths in handle_stripe raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show md: print errno in super_written md/raid5: remove the redundant setting of STRIPE_HANDLE md: register new md sysfs file 'uuid' read-only md: fix max sectors calculation for super 1.0 nvme-loop: remove extra variable in create ctrl nvme-loop: set ctrl state connecting after init nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths nvme-multipath: fix logic for non-optimized paths nvme-rdma: fix controller reset hang during traffic nvme-tcp: fix controller reset hang during traffic nvmet: introduce the passthru Kconfig option nvmet: introduce the passthru configfs interface nvmet: Add passthru enable/disable helpers nvmet: add passthru code to process commands nvme: export nvme_find_get_ns() and nvme_put_ns() nvme: introduce nvme_ctrl_get_by_path() ...
2020-08-02md: print errno in super_writtenGuoqing Jiang1-1/+2
It is better to print errno instead of bi_status. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-02md: register new md sysfs file 'uuid' read-onlySebastian Parschauer1-0/+9
Report the UUID of the MD array in the following format: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx This is useful if you don't want to wait for udev to identify array. And it is also easy for script to monitor it with the format. Signed-off-by: Sebastian Parschauer <s.parschauer@gmx.de> [Guoqing: mention the change in md.rst] Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-08-02md: fix max sectors calculation for super 1.0Xiao Ni1-4/+31
To grow size of super 1.0 raid array, it is necessary to check the device max usable size. Now it uses rdev->sectors for max usable size. If one disk is 500G and the raid device only uses the 100GB of this disk. rdev->sectors can't tell the real max usable size. The max usable size should be dev_size-(superblock_size+bitmap_size+badblock_size). Also, remove unnecessary sb_start update in super_1_rdev_size_change(). Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-07-21md-cluster: fix rmmod issue when md_cluster convert bitmap to noneZhao Heming1-0/+1
update_array_info misses calling module_put when removing cluster bitmap. steps to reproduce: ``` node1 # mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda /dev/sdb mdadm: array /dev/md0 started. node1 # lsmod | egrep "dlm|md_|raid1" md_cluster 28672 1 dlm 212992 14 md_cluster configfs 57344 2 dlm raid1 53248 1 md_mod 176128 2 raid1,md_cluster node1 # mdadm -G /dev/md0 -b none node1 # lsmod | egrep "dlm|md_|raid1" md_cluster 28672 1 <== should be zero dlm 212992 9 md_cluster configfs 57344 2 dlm raid1 53248 1 md_mod 176128 2 raid1,md_cluster node1 # mdadm -G /dev/md0 -b clustered node1 # lsmod | egrep "dlm|md_|raid1" md_cluster 28672 2 <== increase dlm 212992 14 md_cluster configfs 57344 2 dlm raid1 53248 1 md_mod 176128 2 raid1,md_cluster node1 # mdadm -G /dev/md0 -b none node1 # mdadm -G /dev/md0 -b clustered node1 # lsmod | egrep "dlm|md_|raid1" md_cluster 28672 3 <== increase dlm 212992 14 md_cluster configfs 57344 2 dlm raid1 53248 1 md_mod 176128 2 raid1,md_cluster ``` Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Zhao Heming <heming.zhao@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-07-21md-cluster: fix safemode_delay value when converting to clustered bitmapZhao Heming1-2/+9
When array convert to clustered bitmap, the safe_mode_delay doesn't clean and vice versa. the /sys/block/mdX/md/safe_mode_delay keep original value after changing bitmap type. In safe_delay_store(), the code forbids setting mddev->safemode_delay when array is clustered. So in cluster-md env, the expected safemode_delay value should be 0. Reproducible steps: ``` node1 # mdadm --zero-superblock /dev/sd{b,c,d} node1 # mdadm -C /dev/md0 -b internal -e 1.2 -n 2 -l mirror /dev/sdb /dev/sdc node1 # cat /sys/block/md0/md/safe_mode_delay 0.204 node1 # mdadm -G /dev/md0 -b none node1 # mdadm --grow /dev/md0 --bitmap=clustered node1 # cat /sys/block/md0/md/safe_mode_delay 0.204 <== doesn't change, should ZERO for cluster-md node1 # mdadm --zero-superblock /dev/sd{b,c,d} node1 # mdadm -C /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sdb /dev/sdc node1 # cat /sys/block/md0/md/safe_mode_delay 0.000 node1 # mdadm -G /dev/md0 -b none node1 # cat /sys/block/md0/md/safe_mode_delay 0.000 <== doesn't change, should default value ``` Reviewed-by: NeilBrown <neilb@suse.de> Signed-off-by: Zhao Heming <heming.zhao@suse.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-07-16md: rewrite md_setup_drive to avoid ioctlsChristoph Hellwig1-14/+10
md_setup_drive knows it works with md devices, so it is rather pointless to open a file descriptor and issue ioctls. Just call directly into the relevant low-level md routines after getting a handle to the device using blkdev_get_by_dev instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: NeilBrown <neilb@suse.de> Acked-by: Song Liu <song@kernel.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-16md: replace the RAID_AUTORUN ioctl with a direct function callChristoph Hellwig1-13/+1
Instead of using a spcial RAID_AUTORUN ioctl that only exists for non-modular builds and is only called from the early init code, just call the actual function directly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: NeilBrown <neilb@suse.de> Acked-by: Song Liu <song@kernel.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-15md: Fix compilation warningDamien Le Moal1-6/+6
Remove the if statement around the calls to sysfs_link_rdev() to avoid the compilation warnings: warning: suggest braces around empty body in an ‘if’ statement when compiling with W=1. For the call to sysfs_create_link() generating the same warning, use the err variable to store the function result, avoiding triggering another warning as the function is declared as 'warn_unused_result'. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-07-14md: fix deadlock causing by sysfs_notifyJunxiao Bi1-14/+30
The following deadlock was captured. The first process is holding 'kernfs_mutex' and hung by io. The io was staging in 'r1conf.pending_bio_list' of raid1 device, this pending bio list would be flushed by second process 'md127_raid1', but it was hung by 'kernfs_mutex'. Using sysfs_notify_dirent_safe() to replace sysfs_notify() can fix it. There were other sysfs_notify() invoked from io path, removed all of them. PID: 40430 TASK: ffff8ee9c8c65c40 CPU: 29 COMMAND: "probe_file" #0 [ffffb87c4df37260] __schedule at ffffffff9a8678ec #1 [ffffb87c4df372f8] schedule at ffffffff9a867f06 #2 [ffffb87c4df37310] io_schedule at ffffffff9a0c73e6 #3 [ffffb87c4df37328] __dta___xfs_iunpin_wait_3443 at ffffffffc03a4057 [xfs] #4 [ffffb87c4df373a0] xfs_iunpin_wait at ffffffffc03a6c79 [xfs] #5 [ffffb87c4df373b0] __dta_xfs_reclaim_inode_3357 at ffffffffc039a46c [xfs] #6 [ffffb87c4df37400] xfs_reclaim_inodes_ag at ffffffffc039a8b6 [xfs] #7 [ffffb87c4df37590] xfs_reclaim_inodes_nr at ffffffffc039bb33 [xfs] #8 [ffffb87c4df375b0] xfs_fs_free_cached_objects at ffffffffc03af0e9 [xfs] #9 [ffffb87c4df375c0] super_cache_scan at ffffffff9a287ec7 #10 [ffffb87c4df37618] shrink_slab at ffffffff9a1efd93 #11 [ffffb87c4df37700] shrink_node at ffffffff9a1f5968 #12 [ffffb87c4df37788] do_try_to_free_pages at ffffffff9a1f5ea2 #13 [ffffb87c4df377f0] try_to_free_mem_cgroup_pages at ffffffff9a1f6445 #14 [ffffb87c4df37880] try_charge at ffffffff9a26cc5f #15 [ffffb87c4df37920] memcg_kmem_charge_memcg at ffffffff9a270f6a #16 [ffffb87c4df37958] new_slab at ffffffff9a251430 #17 [ffffb87c4df379c0] ___slab_alloc at ffffffff9a251c85 #18 [ffffb87c4df37a80] __slab_alloc at ffffffff9a25635d #19 [ffffb87c4df37ac0] kmem_cache_alloc at ffffffff9a251f89 #20 [ffffb87c4df37b00] alloc_inode at ffffffff9a2a2b10 #21 [ffffb87c4df37b20] iget_locked at ffffffff9a2a4854 #22 [ffffb87c4df37b60] kernfs_get_inode at ffffffff9a311377 #23 [ffffb87c4df37b80] kernfs_iop_lookup at ffffffff9a311e2b #24 [ffffb87c4df37ba8] lookup_slow at ffffffff9a290118 #25 [ffffb87c4df37c10] walk_component at ffffffff9a291e83 #26 [ffffb87c4df37c78] path_lookupat at ffffffff9a293619 #27 [ffffb87c4df37cd8] filename_lookup at ffffffff9a2953af #28 [ffffb87c4df37de8] user_path_at_empty at ffffffff9a295566 #29 [ffffb87c4df37e10] vfs_statx at ffffffff9a289787 #30 [ffffb87c4df37e70] SYSC_newlstat at ffffffff9a289d5d #31 [ffffb87c4df37f18] sys_newlstat at ffffffff9a28a60e #32 [ffffb87c4df37f28] do_syscall_64 at ffffffff9a003949 #33 [ffffb87c4df37f50] entry_SYSCALL_64_after_hwframe at ffffffff9aa001ad RIP: 00007f617a5f2905 RSP: 00007f607334f838 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f6064044b20 RCX: 00007f617a5f2905 RDX: 00007f6064044b20 RSI: 00007f6064044b20 RDI: 00007f6064005890 RBP: 00007f6064044aa0 R8: 0000000000000030 R9: 000000000000011c R10: 0000000000000013 R11: 0000000000000246 R12: 00007f606417e6d0 R13: 00007f6064044aa0 R14: 00007f6064044b10 R15: 00000000ffffffff ORIG_RAX: 0000000000000006 CS: 0033 SS: 002b PID: 927 TASK: ffff8f15ac5dbd80 CPU: 42 COMMAND: "md127_raid1" #0 [ffffb87c4df07b28] __schedule at ffffffff9a8678ec #1 [ffffb87c4df07bc0] schedule at ffffffff9a867f06 #2 [ffffb87c4df07bd8] schedule_preempt_disabled at ffffffff9a86825e #3 [ffffb87c4df07be8] __mutex_lock at ffffffff9a869bcc #4 [ffffb87c4df07ca0] __mutex_lock_slowpath at ffffffff9a86a013 #5 [ffffb87c4df07cb0] mutex_lock at ffffffff9a86a04f #6 [ffffb87c4df07cc8] kernfs_find_and_get_ns at ffffffff9a311d83 #7 [ffffb87c4df07cf0] sysfs_notify at ffffffff9a314b3a #8 [ffffb87c4df07d18] md_update_sb at ffffffff9a688696 #9 [ffffb87c4df07d98] md_update_sb at ffffffff9a6886d5 #10 [ffffb87c4df07da8] md_check_recovery at ffffffff9a68ad9c #11 [ffffb87c4df07dd0] raid1d at ffffffffc01f0375 [raid1] #12 [ffffb87c4df07ea0] md_thread at ffffffff9a680348 #13 [ffffb87c4df07f08] kthread at ffffffff9a0b8005 #14 [ffffb87c4df07f50] ret_from_fork at ffffffff9aa00344 Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-07-13md: improve io stats accountingArtur Paszkiewicz1-12/+45
Use generic io accounting functions to manage io stats. There was an attempt to do this earlier in commit 18c0b223cf99 ("md: use generic io stats accounting functions to simplify io stat accounting"), but it did not include a call to generic_end_io_acct() and caused issues with tracking in-flight IOs, so it was later removed in commit 74672d069b29 ("md: fix md io stats accounting broken"). This patch attempts to fix this by using both disk_start_io_acct() and disk_end_io_acct(). To make it possible, a struct md_io is allocated for every new md bio, which includes the io start_time. A new mempool is introduced for this purpose. We override bio->bi_end_io with our own callback and call disk_start_io_acct() before passing the bio to md_handle_request(). When it completes, we call disk_end_io_acct() and the original bi_end_io callback. This adds correct statistics about in-flight IOs and IO processing time, interpreted e.g. in iostat as await, svctm, aqu-sz and %util. It also fixes a situation where too many IOs where reported if a bio was re-submitted to the mddev, because io accounting is now performed only on newly arriving bios. Acked-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-07-13md: raid0/linear: fix dereference before null check on pointer mddevColin Ian King1-4/+5
Pointer mddev is being dereferenced with a test_bit call before mddev is being null checked, this may cause a null pointer dereference. Fix this by moving the null pointer checks to sanity check mddev before it is dereferenced. Addresses-Coverity: ("Dereference before null check") Fixes: 62f7b1989c02 ("md raid0/linear: Mark array as 'broken' and fail BIOs if a member is gone") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Guilherme G. Piccoli <gpiccoli@canonical.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-07-08writeback: remove bdi->congested_fnChristoph Hellwig1-23/+0
Except for pktdvd, the only places setting congested bits are file systems that allocate their own backing_dev_info structures. And pktdvd is a deprecated driver that isn't useful in stack setup either. So remove the dead congested_fn stacking infrastructure. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Song Liu <song@kernel.org> Acked-by: David Sterba <dsterba@suse.com> [axboe: fixup unused variables in bcache/request.c] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-08md: switch to ->check_events for media change notificationsChristoph Hellwig1-11/+8
md is the last driver using the legacy media_changed method. Switch it over to (not so) new ->clear_events approach, which also removes the need for the ->revalidate_disk method. Signed-off-by: Christoph Hellwig <hch@lst.de> [axboe: remove unused 'bdops' variable in disk_clear_events()] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01block: remove the bd_queue field from struct block_deviceChristoph Hellwig1-1/+1
Just use bd_disk->queue instead. Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01block: move ->make_request_fn to struct block_device_operationsChristoph Hellwig1-2/+3
The make_request_fn is a little weird in that it sits directly in struct request_queue instead of an operation vector. Replace it with a block_device_operations method called submit_bio (which describes much better what it does). Also remove the request_queue argument to it, as the queue can be derived pretty trivially from the bio. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-01block: remove the request_queue argument from blk_queue_splitChristoph Hellwig1-1/+1
The queue can be trivially derived from the bio, so pass one less argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-13md: add a newline when printing parameter 'start_ro' by sysfsXiongfeng Wang1-1/+1
Add a missing newline when printing module parameter 'start_ro' by sysfs. Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-05-13md: stop using ->queuedataChristoph Hellwig1-2/+1
Pointer to mddev is already available in private_data. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-05-13md: remove redundant memalloc scope API usageColy Li1-4/+4
In mddev_create_serial_pool(), memalloc scope APIs memalloc_noio_save() and memalloc_noio_restore() are used when allocating memory by calling mempool_create_kmalloc_pool(). After adding the memalloc scope APIs in raid array suspend context, it is unncessary to explicitly call them around mempool_create_kmalloc_pool() any longer. This patch removes the redundant memalloc scope APIs in mddev_create_serial_pool(). Signed-off-by: Coly Li <colyli@suse.de> Cc: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-05-13md: use memalloc scope APIs in mddev_suspend()/mddev_resume()Coly Li1-0/+4
In raid5.c:resize_chunk(), scribble_alloc() is called with GFP_NOIO flag, then it is sent into kvmalloc_array() inside scribble_alloc(). The problem is kvmalloc_array() eventually calls kvmalloc_node() which does not accept non GFP_KERNEL compatible flag like GFP_NOIO, then kmalloc_node() is called indeed to allocate physically continuous pages. When system memory is under heavy pressure, and the requesting size is large, there is high probability that allocating continueous pages will fail. But simply using GFP_KERNEL flag to call kvmalloc_array() is also progblematic. In the code path where scribble_alloc() is called, the raid array is suspended, if kvmalloc_node() triggers memory reclaim I/Os and such I/Os go back to the suspend raid array, deadlock will happen. What is desired here is to allocate non-physically (a.k.a virtually) continuous pages and avoid memory reclaim I/Os. Michal Hocko suggests to use the mmealloc sceope APIs to restrict memory reclaim I/O in allocating context, specifically to call memalloc_noio_save() when suspend the raid array and to call memalloc_noio_restore() when resume the raid array. This patch adds the memalloc scope APIs in mddev_suspend() and mddev_resume(), to restrict memory reclaim I/Os during the raid array is suspended. The benifit of adding the memalloc scope API in the unified entry point mddev_suspend()/mddev_resume() is, no matter which md raid array type (personality), we are sure the deadlock by recursive memory reclaim I/O won't happen on the suspending context. Please notice that the memalloc scope APIs only take effect on the raid array suspending context, if the memory allocation is from another new created kthread after raid array suspended, the recursive memory reclaim I/Os won't be restricted. The mddev_suspend()/mddev_resume() entries are used for the critical section where the raid metadata is modifying, creating a kthread to allocate memory inside the critical section is queer and very probably being buggy. Fixes: b330e6a49dc3 ("md: convert to kvmalloc") Suggested-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-05-13md: remove the extra line for ->hot_add_diskGuoqing Jiang1-4/+2
It is not not necessary to add a newline for them since they don't exceed 80 characters, and it is not intutive to distinguish ->hot_add_disk() from hot_add_disk() too. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-05-13md: flush md_rdev_misc_wq for HOT_ADD_DISK caseGuoqing Jiang1-1/+1
Since rdev->kobj is removed asynchronously, it is possible that the rdev->kobj still exists when try to add the rdev again after rdev is removed. But this path md_ioctl (HOT_ADD_DISK) -> hot_add_disk -> bind_rdev_to_array missed it. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-05-13md: don't flush workqueue unconditionally in md_openGuoqing Jiang1-1/+2
We need to check mddev->del_work before flush workqueu since the purpose of flush is to ensure the previous md is disappeared. Otherwise the similar deadlock appeared if LOCKDEP is enabled, it is due to md_open holds the bdev->bd_mutex before flush workqueue. kernel: [ 154.522645] ====================================================== kernel: [ 154.522647] WARNING: possible circular locking dependency detected kernel: [ 154.522650] 5.6.0-rc7-lp151.27-default #25 Tainted: G O kernel: [ 154.522651] ------------------------------------------------------ kernel: [ 154.522653] mdadm/2482 is trying to acquire lock: kernel: [ 154.522655] ffff888078529128 ((wq_completion)md_misc){+.+.}, at: flush_workqueue+0x84/0x4b0 kernel: [ 154.522673] kernel: [ 154.522673] but task is already holding lock: kernel: [ 154.522675] ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590 kernel: [ 154.522691] kernel: [ 154.522691] which lock already depends on the new lock. kernel: [ 154.522691] kernel: [ 154.522694] kernel: [ 154.522694] the existing dependency chain (in reverse order) is: kernel: [ 154.522696] kernel: [ 154.522696] -> #4 (&bdev->bd_mutex){+.+.}: kernel: [ 154.522704] __mutex_lock+0x87/0x950 kernel: [ 154.522706] __blkdev_get+0x79/0x590 kernel: [ 154.522708] blkdev_get+0x65/0x140 kernel: [ 154.522709] blkdev_get_by_dev+0x2f/0x40 kernel: [ 154.522716] lock_rdev+0x3d/0x90 [md_mod] kernel: [ 154.522719] md_import_device+0xd6/0x1b0 [md_mod] kernel: [ 154.522723] new_dev_store+0x15e/0x210 [md_mod] kernel: [ 154.522728] md_attr_store+0x7a/0xc0 [md_mod] kernel: [ 154.522732] kernfs_fop_write+0x117/0x1b0 kernel: [ 154.522735] vfs_write+0xad/0x1a0 kernel: [ 154.522737] ksys_write+0xa4/0xe0 kernel: [ 154.522745] do_syscall_64+0x64/0x2b0 kernel: [ 154.522748] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522749] kernel: [ 154.522749] -> #3 (&mddev->reconfig_mutex){+.+.}: kernel: [ 154.522752] __mutex_lock+0x87/0x950 kernel: [ 154.522756] new_dev_store+0xc9/0x210 [md_mod] kernel: [ 154.522759] md_attr_store+0x7a/0xc0 [md_mod] kernel: [ 154.522761] kernfs_fop_write+0x117/0x1b0 kernel: [ 154.522763] vfs_write+0xad/0x1a0 kernel: [ 154.522765] ksys_write+0xa4/0xe0 kernel: [ 154.522767] do_syscall_64+0x64/0x2b0 kernel: [ 154.522769] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522770] kernel: [ 154.522770] -> #2 (kn->count#253){++++}: kernel: [ 154.522775] __kernfs_remove+0x253/0x2c0 kernel: [ 154.522778] kernfs_remove+0x1f/0x30 kernel: [ 154.522780] kobject_del+0x28/0x60 kernel: [ 154.522783] mddev_delayed_delete+0x24/0x30 [md_mod] kernel: [ 154.522786] process_one_work+0x2a7/0x5f0 kernel: [ 154.522788] worker_thread+0x2d/0x3d0 kernel: [ 154.522793] kthread+0x117/0x130 kernel: [ 154.522795] ret_from_fork+0x3a/0x50 kernel: [ 154.522796] kernel: [ 154.522796] -> #1 ((work_completion)(&mddev->del_work)){+.+.}: kernel: [ 154.522800] process_one_work+0x27e/0x5f0 kernel: [ 154.522802] worker_thread+0x2d/0x3d0 kernel: [ 154.522804] kthread+0x117/0x130 kernel: [ 154.522806] ret_from_fork+0x3a/0x50 kernel: [ 154.522807] kernel: [ 154.522807] -> #0 ((wq_completion)md_misc){+.+.}: kernel: [ 154.522813] __lock_acquire+0x1392/0x1690 kernel: [ 154.522816] lock_acquire+0xb4/0x1a0 kernel: [ 154.522818] flush_workqueue+0xab/0x4b0 kernel: [ 154.522821] md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522823] __blkdev_get+0xea/0x590 kernel: [ 154.522825] blkdev_get+0x65/0x140 kernel: [ 154.522828] do_dentry_open+0x1d1/0x380 kernel: [ 154.522831] path_openat+0x567/0xcc0 kernel: [ 154.522834] do_filp_open+0x9b/0x110 kernel: [ 154.522836] do_sys_openat2+0x201/0x2a0 kernel: [ 154.522838] do_sys_open+0x57/0x80 kernel: [ 154.522840] do_syscall_64+0x64/0x2b0 kernel: [ 154.522842] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522844] kernel: [ 154.522844] other info that might help us debug this: kernel: [ 154.522844] kernel: [ 154.522846] Chain exists of: kernel: [ 154.522846] (wq_completion)md_misc --> &mddev->reconfig_mutex --> &bdev->bd_mutex kernel: [ 154.522846] kernel: [ 154.522850] Possible unsafe locking scenario: kernel: [ 154.522850] kernel: [ 154.522852] CPU0 CPU1 kernel: [ 154.522853] ---- ---- kernel: [ 154.522854] lock(&bdev->bd_mutex); kernel: [ 154.522856] lock(&mddev->reconfig_mutex); kernel: [ 154.522858] lock(&bdev->bd_mutex); kernel: [ 154.522860] lock((wq_completion)md_misc); kernel: [ 154.522861] kernel: [ 154.522861] *** DEADLOCK *** kernel: [ 154.522861] kernel: [ 154.522864] 1 lock held by mdadm/2482: kernel: [ 154.522865] #0: ffff88804efa9338 (&bdev->bd_mutex){+.+.}, at: __blkdev_get+0x79/0x590 kernel: [ 154.522868] kernel: [ 154.522868] stack backtrace: kernel: [ 154.522873] CPU: 1 PID: 2482 Comm: mdadm Tainted: G O 5.6.0-rc7-lp151.27-default #25 kernel: [ 154.522875] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 kernel: [ 154.522878] Call Trace: kernel: [ 154.522881] dump_stack+0x8f/0xcb kernel: [ 154.522884] check_noncircular+0x194/0x1b0 kernel: [ 154.522888] ? __lock_acquire+0x1392/0x1690 kernel: [ 154.522890] __lock_acquire+0x1392/0x1690 kernel: [ 154.522893] lock_acquire+0xb4/0x1a0 kernel: [ 154.522895] ? flush_workqueue+0x84/0x4b0 kernel: [ 154.522898] flush_workqueue+0xab/0x4b0 kernel: [ 154.522900] ? flush_workqueue+0x84/0x4b0 kernel: [ 154.522905] ? md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522908] md_open+0xb6/0xc0 [md_mod] kernel: [ 154.522910] __blkdev_get+0xea/0x590 kernel: [ 154.522912] ? bd_acquire+0xc0/0xc0 kernel: [ 154.522914] blkdev_get+0x65/0x140 kernel: [ 154.522916] ? bd_acquire+0xc0/0xc0 kernel: [ 154.522918] do_dentry_open+0x1d1/0x380 kernel: [ 154.522921] path_openat+0x567/0xcc0 kernel: [ 154.522923] ? __lock_acquire+0x380/0x1690 kernel: [ 154.522926] do_filp_open+0x9b/0x110 kernel: [ 154.522929] ? __alloc_fd+0xe5/0x1f0 kernel: [ 154.522935] ? kmem_cache_alloc+0x28c/0x630 kernel: [ 154.522939] ? do_sys_openat2+0x201/0x2a0 kernel: [ 154.522941] do_sys_openat2+0x201/0x2a0 kernel: [ 154.522944] do_sys_open+0x57/0x80 kernel: [ 154.522946] do_syscall_64+0x64/0x2b0 kernel: [ 154.522948] entry_SYSCALL_64_after_hwframe+0x49/0xbe kernel: [ 154.522951] RIP: 0033:0x7f98d279d9ae And md_alloc also flushed the same workqueue, but the thing is different here. Because all the paths call md_alloc don't hold bdev->bd_mutex, and the flush is necessary to avoid race condition, so leave it as it is. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-05-13md: add new workqueue for delete rdevGuoqing Jiang1-8/+29
Since the purpose of call flush_workqueue in new_dev_store is to ensure md_delayed_delete() has completed, so we should check rdev->del_work is pending or not. To suppress lockdep warning, we have to check mddev->del_work while md_delayed_delete is attached to rdev->del_work, so it is not aligned to the purpose of flush workquee. So a new workqueue is needed to avoid the awkward situation, and introduce a new func flush_rdev_wq to flush the new workqueue after check if there was pending work. Also like new_dev_store, ADD_NEW_DISK ioctl has the same purpose to flush workqueue while it holds bdev->bd_mutex, so make the same change applies to the ioctl to avoid similar lock issue. And md_delayed_delete actually wants to delete rdev, so rename the function to rdev_delayed_delete. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-05-13md: add checkings before flush md_misc_wqGuoqing Jiang1-2/+4
Coly reported possible circular locking dependencyi with LOCKDEP enabled, quote the below info from the detailed report [1]. [ 1607.673903] Chain exists of: [ 1607.673903] kn->count#256 --> (wq_completion)md_misc --> (work_completion)(&rdev->del_work) [ 1607.673903] [ 1607.827946] Possible unsafe locking scenario: [ 1607.827946] [ 1607.898780] CPU0 CPU1 [ 1607.952980] ---- ---- [ 1608.007173] lock((work_completion)(&rdev->del_work)); [ 1608.069690] lock((wq_completion)md_misc); [ 1608.149887] lock((work_completion)(&rdev->del_work)); [ 1608.242563] lock(kn->count#256); [ 1608.283238] [ 1608.283238] *** DEADLOCK *** [ 1608.283238] [ 1608.354078] 2 locks held by kworker/5:0/843: [ 1608.405152] #0: ffff8889eecc9948 ((wq_completion)md_misc){+.+.}, at: process_one_work+0x42b/0xb30 [ 1608.512399] #1: ffff888a1d3b7e10 ((work_completion)(&rdev->del_work)){+.+.}, at: process_one_work+0x42b/0xb30 [ 1608.632130] Since works (rdev->del_work and mddev->del_work) are queued in md_misc_wq, then lockdep_map lock is held if either of them are running, then both of them try to hold kernfs lock by call kobject_del. Then if new_dev_store or array_state_store are triggered by write to the related sysfs node, so the write operation gets kernfs lock, but need the lockdep_map because all of them would trigger flush_workqueue(md_misc_wq) finally, then the same lockdep_map lock is needed. To suppress the lockdep warnning, we should flush the workqueue in case the related work is pending. And several works are attached to md_misc_wq, so we need to check which work should be checked: 1. for __md_stop_writes, the purpose of call flush workqueue is ensure sync thread is started if it was starting, so check mddev->del_work is pending or not since md_start_sync is attached to mddev->del_work. 2. __md_stop flushes md_misc_wq to ensure event_work is done, check the event_work is enough. Assume raid_{ctr,dtr} -> md_stop -> __md_stop doesn't need the kernfs lock. 3. both new_dev_store (holds kernfs lock) and ADD_NEW_DISK ioctl (holds the bdev->bd_mutex) call flush_workqueue to ensure md_delayed_delete has completed, this case will be handled in next patch. 4. md_open flushes workqueue to ensure the previous md is disappeared, but it holds bdev->bd_mutex then try to flush workqueue, so it is better to check mddev->del_work as well to avoid potential lock issue, this will be done in another patch. [1]: https://marc.info/?l=linux-raid&m=158518958031584&w=2 Cc: Coly Li <colyli@suse.de> Reported-by: Coly Li <colyli@suse.de> Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-03-30Merge tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+1
Pull block driver updates from Jens Axboe: - floppy driver cleanup series from Willy - NVMe updates and fixes (Various) - null_blk trace improvements (Chaitanya) - bcache fixes (Coly) - md fixes (via Song) - loop block size change optimizations (Martijn) - scnprintf() use (Takashi) * tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-block: (81 commits) null_blk: add trace in null_blk_zoned.c null_blk: add tracepoint helpers for zoned mode block: add a zone condition debug helper nvme: cleanup namespace identifier reporting in nvme_init_ns_head nvme: rename __nvme_find_ns_head to nvme_find_ns_head nvme: refactor nvme_identify_ns_descs error handling nvme-tcp: Add warning on state change failure at nvme_tcp_setup_ctrl nvme-rdma: Add warning on state change failure at nvme_rdma_setup_ctrl nvme: Fix controller creation races with teardown flow nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrl nvme: Fix ctrl use-after-free during sysfs deletion nvme-pci: Re-order nvme_pci_free_ctrl nvme: Remove unused return code from nvme_delete_ctrl_sync nvme: Use nvme_state_terminal helper nvme: release ida resources nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IO nvmet-tcp: optimize tcp stack TX when data digest is used nvme-fabrics: Use scnprintf() for avoiding potential buffer overflow nvme-multipath: do not reset on unknown status nvmet-rdma: allocate RW ctxs according to mdts ...
2020-03-27block: simplify queue allocationChristoph Hellwig1-2/+1
Current make_request based drivers use either blk_alloc_queue_node or blk_alloc_queue to allocate a queue, and then set up the make_request_fn function pointer and a few parameters using the blk_queue_make_request helper. Simplify this by passing the make_request pointer to blk_alloc_queue, and while at it merge the _node variant into the main helper by always passing a node_id, and remove the superfluous gfp_mask parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25block: move the part_stat* helpers from genhd.h to a new headerChristoph Hellwig1-0/+1
These macros are just used by a few files. Move them out of genhd.h, which is included everywhere into a new standalone header. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: cleanup how md_autodetect_dev is calledChristoph Hellwig1-0/+1
Add a new include/linux/raid/detect.h header to declare the md_autodetect_dev prototype which can be shared between md and the partition code. Then use IS_BUILTIN to call it instead of the ifdef magic. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-24block: remove __bdevnameChristoph Hellwig1-2/+2
There is no good reason for __bdevname to exist. Just open code printing the string in the callers. For three of them the format string can be trivially merged into existing printk statements, and in init/do_mounts.c we can at least do the scnprintf once at the start of the function, and unconditional of CONFIG_BLOCK to make the output for tiny configfs a little more helpful. Acked-by: Theodore Ts'o <tytso@mit.edu> # for ext4 Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-17md: check arrays is suspended in mddev_detach before call quiesce operationsGuoqing Jiang1-1/+1
Don't call quiesce(1) and quiesce(0) if array is already suspended, otherwise in level_store, the array is writable after mddev_detach in below part though the intention is to make array writable after resume. mddev_suspend(mddev); mddev_detach(mddev); ... mddev_resume(mddev); And it also causes calltrace as follows in [1]. [48005.653834] WARNING: CPU: 1 PID: 45380 at kernel/kthread.c:510 kthread_park+0x77/0x90 [...] [48005.653976] CPU: 1 PID: 45380 Comm: mdadm Tainted: G OE 5.4.10-arch1-1 #1 [48005.653979] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./J4105-ITX, BIOS P1.40 08/06/2018 [48005.653984] RIP: 0010:kthread_park+0x77/0x90 [48005.654015] Call Trace: [48005.654039] r5l_quiesce+0x3c/0x70 [raid456] [48005.654052] raid5_quiesce+0x228/0x2e0 [raid456] [48005.654073] mddev_detach+0x30/0x70 [md_mod] [48005.654090] level_store+0x202/0x670 [md_mod] [48005.654099] ? security_capable+0x40/0x60 [48005.654114] md_attr_store+0x7b/0xc0 [md_mod] [48005.654123] kernfs_fop_write+0xce/0x1b0 [48005.654132] vfs_write+0xb6/0x1a0 [48005.654138] ksys_write+0x67/0xe0 [48005.654146] do_syscall_64+0x4e/0x140 [48005.654155] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [48005.654161] RIP: 0033:0x7fa0c8737497 [1]: https://bugzilla.kernel.org/show_bug.cgi?id=206161 Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2020-02-04proc: convert everything to "struct proc_ops"Alexey Dobriyan1-8/+7
The most notable change is DEFINE_SHOW_ATTRIBUTE macro split in seq_file.h. Conversion rule is: llseek => proc_lseek unlocked_ioctl => proc_ioctl xxx => proc_xxx delete ".owner = THIS_MODULE" line [akpm@linux-foundation.org: fix drivers/isdn/capi/kcapi_proc.c] [sfr@canb.auug.org.au: fix kernel/sched/psi.c] Link: http://lkml.kernel.org/r/20200122180545.36222f50@canb.auug.org.au Link: http://lkml.kernel.org/r/20191225172546.GB13378@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-13md/raid1: use bucket based mechanism for IO serializationGuoqing Jiang1-5/+13
Since raid1 had already used bucket based mechanism to reduce the conflict between write IO and resync IO, it is possible to speed up performance for io serialization with refer to the same mechanism. To align with the barrier bucket mechanism, we created arrays (with the same number of BARRIER_BUCKETS_NR) for spinlock, rb tree and waitqueue. Then we can reduce lock competition with multiple spinlocks, boost search performance with multiple rb trees and also reduce thundering herd problem with multiple waitqueues. Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Song Liu <songliubraving@fb.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.