aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/dvb/siano/sms-cards.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-08-13[media] dvb-usb: move it to drivers/media/usb/dvb-usbMauro Carvalho Chehab1-311/+0
As media/dvb will be removed, move it to a proper place. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-10-31drivers/media: Add module.h to all files using it implicitlyPaul Gortmaker1-0/+1
A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in clocksource are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-22[media] rc/keymaps: Rename Hauppauge table as rc-hauppaugeMauro Carvalho Chehab1-1/+1
There are two "hauppauge-new" keymaps, one with protocol unknown, and the other with the protocol marked accordingly. However, both tables are miss-named. Also, the old rc-hauppauge-new is broken, as it mixes three different controllers as if they were just one. This patch solves half of the problem by renaming the correct keycode table as just rc-hauppauge. This table contains the codes for the four different types of remote controllers found on Hauppauge cards, properly mapped with their different addresses. create mode 100644 drivers/media/rc/keymaps/rc-hauppauge.c delete mode 100644 drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c [Jarod: fix up RC_MAP_HAUPPAUGE defines] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2010-08-02V4L/DVB: sms: Convert IR support to use the Remote Controller coreMauro Carvalho Chehab1-0/+1
Rewrites the siano IR implementation. The previous implementation were non-standard. As such, it has issues if more than one device registers IR, as there used to have some static constants used during protocol decoding phase. Also, it used to implement its on RAW decoder, and only for RC5. The new code uses RC core subsystem for handling IR. This brings several new features to the driver, including: - Allow to dynamically replace the IR keycodes; - Supports all existing raw decoders (JVC, NEC, RC-5, RC-6, SONY); - Supports lirc dev; - Doesn't have race conditions when more than one sms IR is registered; - The code size for the IR implementation is very small; - it exports the IR features via /sys/class/rc. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02V4L/DVB: smsusb: enable IR port for Hauppauge WinTV MiniStickMauro Carvalho Chehab1-0/+1
Add the proper gpio port for WinTV MiniStick, with the information provided by Michael. Thanks-to: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB (13840): smsusb: Add ISDB-T firmware for Hauppauge WinTV-Nova-T-MiniStickMichael Krufky1-0/+1
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13380): sms-cards: make id unsigned in sms_get_board()Roel Kluin1-1/+1
Make id signed so we can't get an invalid pointer when we pass a negative id. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-12-05V4L/DVB (13295): sms1xxx: load smsdvb also for the hauppauge tiger cardsÉric Piel1-0/+2
load smsdvb also for the hauppauge tiger cards [dougsland@redhat.com: fixed rejects due changes in sms-cards.c] Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Acked-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12386): sms1xxx: fix build warning: unused variable 'board'Michael Krufky1-2/+0
Remove the following build warning: sms-cards.c: In function 'sms_board_event': sms-cards.c:120: warning: unused variable 'board' Thanks to Hans Verkuil for pointing this out. The problem code has been #if 0'd for now, this will likely be used again in the future, once the event interface is complete. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-13V4L/DVB (12374): sms1xxx: fix broken Hauppauge devicesMichael Krufky1-100/+0
The current GPIO configuration breaks all Hauppauge devices. The code being removed affects Hauppauge devices only, and is the cause of the breakage. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11887): Siano: smscards - add board (target) eventsUri Shkolnik1-0/+167
Add events handling for targets. All board-specific (target specific) should reside here. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11885): Siano: Add new GPIO management interfaceUri Shkolnik1-1/+1
Add new GPIO management interface to replace old (buggy) one. Keeping old interface intact for now. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Acked-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11883): Siano: cards - add two additional (USB) devicesUri Shkolnik1-0/+10
Add two additional USB targets, add these to the 'cards' modules and to the 'smsusb' module. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11818): Siano: smscards - assign gpio to HPG targetsUri Shkolnik1-0/+5
Assign using the new gpio structures, i/o for exist HPG targets, without removing the old implementation. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11817): Siano: smscards - fix wrong firmware assignmentUri Shkolnik1-3/+0
Remove wrong firmware assignments for Nova, Stellar Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-06-16V4L/DVB (11815): Siano: bind infra-red componentUri Shkolnik1-0/+1
Add the infra-red to the makefile and declare the assignment in the cards components. [mchehab@redhat.com: Fixed a few trivial merge conflicts] Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10772): siano: prevent duplicate variable declarationMichael Krufky1-0/+4
Fix the following build error: drivers/media/dvb/siano/smsusb.o: In function `get_order': include/asm-generic/page.h:10: multiple definition of `sms_dbg' drivers/media/dvb/siano/sms1xxx.o:include/asm-generic/page.h:10: first defined here drivers/media/dvb/siano/smsdvb.o: In function `get_order': include/asm-generic/page.h:10: multiple definition of `sms_dbg' drivers/media/dvb/siano/sms1xxx.o:include/asm-generic/page.h:10: first defined here Thanks to Mauro Carvalho Chehab for his original patch to address this issue. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10753): siano: convert EXPORT_SYMBOL to EXPORT_SYMBOL_GPLMichael Krufky1-6/+6
As pointed out by Mauro Chehab, we should always use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL wherever possible. A message was posted to the linux-media mailing list about this, checking with Uri Shkolnik of Siano Mobile Silicon if this is okay to convert. As per Uri's response to this email, it is OK for us to make this conversion. http://www.spinics.net/lists/linux-media/msg02200.html Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10752): sms1xxx: load smsdvb module automatically based on device idMichael Krufky1-0/+17
The smsdvb module was separated from the core and usb code. This change loads smsdvb automatically for driver configurations that depend on it. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10751): sms1xxx: fix checkpatch.pl violations introduced by previous changesetMichael Krufky1-0/+5
Fix checkpatch.pl violations introduced by previous changeset: ERROR: do not use C99 // comments 156: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1373: +//#ifdef DVB_CORE ERROR: do not use C99 // comments 157: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1374: +// smsdvb_unregister(); ERROR: do not use C99 // comments 158: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1375: +//#endif WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 163: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1380: +EXPORT_SYMBOL(smscore_onresponse); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 164: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1381: +EXPORT_SYMBOL(sms_get_board); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 165: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1382: +EXPORT_SYMBOL(sms_debug); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 166: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1383: +EXPORT_SYMBOL(smscore_putbuffer); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 167: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1384: +EXPORT_SYMBOL(smscore_registry_getmode); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 168: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1385: +EXPORT_SYMBOL(smscore_register_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 169: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1386: +EXPORT_SYMBOL(smscore_set_board_id); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 170: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1387: +EXPORT_SYMBOL(smscore_start_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 171: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1388: +EXPORT_SYMBOL(smsusb_id_table); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 172: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1389: +EXPORT_SYMBOL(smscore_unregister_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 173: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1390: +EXPORT_SYMBOL(smscore_getbuffer); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 174: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1391: +EXPORT_SYMBOL(smscore_get_device_mode); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 175: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1392: +EXPORT_SYMBOL(smscore_register_client); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 176: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1393: +EXPORT_SYMBOL(smscore_unregister_hotplug); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 177: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1394: +EXPORT_SYMBOL(smsclient_sendrequest); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 178: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1395: +EXPORT_SYMBOL(smscore_unregister_client); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 179: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1396: +EXPORT_SYMBOL(smscore_get_board_id); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 180: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1397: +EXPORT_SYMBOL(smscore_register_hotplug); WARNING: line over 80 characters 391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398: +extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename); ERROR: "foo* bar" should be "foo *bar" 391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398: +extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename); WARNING: line over 80 characters 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ERROR: "foo* bar" should be "foo *bar" 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ERROR: space required after that ',' (ctx:VxV) 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ^ WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 489: FILE: linux/drivers/media/dvb/siano/smsusb.c:443: + printk(KERN_INFO"%s Entering status %d.\n", __FUNCTION__, msg.event); WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 501: FILE: linux/drivers/media/dvb/siano/smsusb.c:455: + printk(KERN_INFO "%s Entering.\n", __FUNCTION__); ERROR: space prohibited before that '++' (ctx:WxB) 505: FILE: linux/drivers/media/dvb/siano/smsusb.c:459: + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i ++) ^ WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 517: FILE: linux/drivers/media/dvb/siano/smsusb.c:471: + __FUNCTION__, rc); Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> [mchehab@redhat.com: sms_dbg were declared on 3 different files] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10749): sms1xxx: move smsusb_id_table into smsusb.cMichael Krufky1-47/+0
Move the usb_device_id table to the smsusb module in preparation for the sms1xxx module to be split into sub-modules. This will allow the smsusb driver to start up automatically upon insertion of the USB device. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10746): sms1xxx: enable rf switch on Hauppauge Tiger devicesMichael Krufky1-2/+21
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10417): sms1xxx: add missing usb id 2040:2011Michael Krufky1-0/+2
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10168): sms1xxx: fix inverted gpio for lna control on tiger r2Michael Krufky1-1/+1
The GPIO logic for LNA control on the Tiger r2 devices was inverted. This patch corrects the problem. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10167): sms1xxx: add support for inverted gpioMichael Krufky1-4/+13
negative gpio values signify inverted polarity Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9737): sms1xxx: enable LNA control on Hauppauge WinTV MiniCardMichael Krufky1-1/+12
Power the LNA while the frontend is in use. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9739): sms1xxx: enable signal quality indicator LEDs on Hauppauge WinTV MiniStickMichael Krufky1-0/+22
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9736): sms1xxx: enable power LED on Hauppauge WinTV MiniStickMichael Krufky1-0/+15
Enable power LED while the frontend is in use. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9735): sms1xxx: turn off LEDs after initialization of Hauppauge WinTV MiniStickMichael Krufky1-0/+47
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9733): sms1xxx: add autodetection support for Hauppauge WinTV MiniCardMichael Krufky1-0/+15
add USB IDs for Hauppauge WinTV MiniCard DVB-T Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-24V4L/DVB (9732): sms1xxx: use new firmware for Hauppauge WinTV MiniStickMichael Krufky1-1/+1
New firmware image brings enhanced tuning performance. Firmware is available for download at the following location: http://www.steventoth.net/linux/sms1xxx Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-17V4L/DVB (9248): sms1xxx: support two new revisions of the Hauppauge WinTV MiniStickMichael Krufky1-0/+4
Autodetect 2040:5520 and 2040:5530 as Hauppauge WinTV MiniStick Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8979): sms1xxx: Add new USB product ID for Hauppauge WinTV MiniStickMichael Krufky1-0/+2
2040:5510 is the same hardware as 2040:5500 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-10-04V4L/DVB (8978): sms1xxx: fix product name for Hauppauge WinTV MiniStickMichael Krufky1-1/+1
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-03V4L/DVB (8722): sms1xxx: fix typo in license headerMichael Krufky1-1/+1
This should have read, "GNU General Public License version 2" rather than, "GNU General Public License version 3" This was actually a typo mass-blunder -- this is not a change in licence, as the code was always GPLv2. Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-07-20V4L/DVB (8313): sms1xxx: add support for Hauppauge WinTV-Nova-T-MiniStickMichael Krufky1-0/+32
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8312): sms1xxx: add firmware filenames to board properties for stellar and novaMichael Krufky1-0/+3
Assign the following firmware filenames: sms1xxx-stellar-dvbt-01.fw sms1xxx-nova-a-dvbt-01.fw sms1xxx-nova-b-dvbt-01.fw Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8308): sms1xxx: Provide option to support Siano default usb idsMichael Krufky1-0/+2
Provide an option to enable / disable support for Siano's default usb ids. This allows the support for Siano's USB IDs to be disabled, so that Siano's external driver can be used, instead. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8302): sms1xxx: fix Siano board namesMichael Krufky1-8/+4
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20V4L/DVB (8292): sms1xxx: add code to allow device-specific functionalityMichael Krufky1-0/+69
Set board ID in the usb_device_id table's driver_info field. Use board name when registering the dvb adapter. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.